geda-gaf not finding config files

[craignied@…]

I upgraded geda-gaf to 1.8.2:

~$ port installed geda-gaf
The following ports are currently installed:
  geda-gaf @1.6.2_1
  geda-gaf @1.8.2_0 (active)

It is now not finding the config files:

$ cat gschem.log
...
Read ~/.gEDA/gafrc file [/home/craign/.gEDA/gafrc]
Did not find optional local gafrc file [/home/craign/gaf/projects/proto4000/gafrc]

It seems to be looking for /home as in a Linux build rather than /Users as in a OSX build

[ryandesign (Ryan Carsten Schmidt)]

Replying to craignied@…:

$ cat gschem.log
...
Read ~/.gEDA/gafrc file [/home/craign/.gEDA/gafrc]
Did not find optional local gafrc file [/home/craign/gaf/projects/proto4000/gafrc]

Where is this logfile located and what steps are needed to produce it?

[craignied@…]

Massive apologies. I fell down the wrong rabbit hole. I am having problems running 1.8.2, but pasted the wrong log file. The log file is displayed when the program is initially run, just run gschem, and you'll see a box with all the errors.

The file exists:

$ ls /opt/local/share/gEDA/scheme/gschem.scm
/opt/local/share/gEDA/scheme/gschem.scm

Could this be because I upgraded the port rather than doing a clean install? 1.6.2 still works.

This is what I'm getting:

gEDA/gschem version 1.8.2.20130925
gEDA/gschem comes with ABSOLUTELY NO WARRANTY; see COPYING for more details.
This is free software, and you are welcome to redistribute it under certain
conditions; please see the COPYING file for more details.

ERROR: In procedure dynamic-link:
ERROR: file: "libguile-srfi-srfi-1-v-3", message: "file not found"
Failed to read init scm file [/opt/local/share/gEDA/scheme/gschem.scm]

Backtrace:
In unknown file:
   ?: 19  (let* (# # # #) (resolve-module dir-hint-module-name #f) (and # #))
    ...
   ?: 20  (letrec ((load-file #)) (dynamic-wind (lambda () #) (lambda () #) ...) ...)
   ?: 21* [dynamic-wind #<procedure #f ()> #<procedure #f ()> #<procedure #f ()>]
   ?: 22* [#<procedure #f ()>]
   ?: 23* (let* ((file #)) (cond (# => #) (# => #)))
   ?: 24  [#<procedure #f (full)> "/opt/local/share/gEDA/scheme/geda/os.scm"]
   ?: 25  [with-fluid* #<fluid 7> #f #<procedure #f ()>]
   ?: 26* [#<procedure #f ()>]
   ?: 27* [load-file #<primitive-procedure primitive-load> ...]
   ?: 28* [save-module-excursion #<procedure #f ()>]
   ?: 29  (let (# #) (dynamic-wind # thunk #))
   ?: 30  [dynamic-wind #<procedure #f ()> #<procedure #f ()> #<procedure #f ()>]
   ?: 31* [#<procedure #f ()>]
   ?: 32* [primitive-load "/opt/local/share/gEDA/scheme/geda/os.scm"]
In /opt/local/share/gEDA/scheme/geda/os.scm:
  34: 33* (define-public separator-char (if (platform? #) #\\ #\/))
  34: 34  (begin (define-private separator-char (if # #\\ #\/)) (eval-case (# #)))
In unknown file:
   ?: 35* (define-private separator-char (if (platform? #) #\\ #\/))
In /opt/local/share/gEDA/scheme/geda/os.scm:
  35: 36* (if (platform? (quote win32-native)) #\\ #\/)
  35: 37* [platform? win32-native]
  32: 38  (member x (platform))

/opt/local/share/gEDA/scheme/geda/os.scm:32:3: In expression (member x (platform)):
/opt/local/share/gEDA/scheme/geda/os.scm:32:3: Unbound variable: member
ERROR: Unable to parse config from [/opt/local/share/gEDA/system-gafrc]: Unbound variable: member

Parsed config from [/Users/craign/.gEDA/gafrc]

Backtrace:
In /opt/local/share/gEDA/system-gschemrc:
  27: 0* (color-map-make-friendly display-color-map)

/opt/local/share/gEDA/system-gschemrc:27:1: In expression (color-map-make-friendly display-color-map):
/opt/local/share/gEDA/system-gschemrc:27:1: Unbound variable: color-map-make-friendly
ERROR: Unable to parse config from [/opt/local/share/gEDA/system-gschemrc]: Unbound variable: color-map-make-friendly

Could not find image at file: ../lib/bitmaps/gschem-comp.xpm.
Could not find image at file: ../lib/bitmaps/gschem-net.xpm.
Could not find image at file: ../lib/bitmaps/gschem-bus.xpm.
Could not find image at file: ../lib/bitmaps/gschem-text.xpm.
Could not find image at file: ../lib/bitmaps/gschem-select.xpm.
Loading schematic [/Users/craign/Desktop/test.sch]
Component [title-B.sym] was not found in the component library
Tried to set the sensitivity on non-existent menu item '_Edit/Cu_t'
Tried to set the sensitivity on non-existent menu item '_Edit/_Copy'
Tried to set the sensitivity on non-existent menu item '_Edit/_Delete'
Tried to set the sensitivity on non-existent menu item '_Edit/Copy Mode'
Tried to set the sensitivity on non-existent menu item '_Edit/Multiple Copy Mode'
Tried to set the sensitivity on non-existent menu item '_Edit/Move Mode'
Tried to set the sensitivity on non-existent menu item '_Edit/Rotate 90 Mode'
Tried to set the sensitivity on non-existent menu item '_Edit/Mirror Mode'
Tried to set the sensitivity on non-existent menu item '_Edit/Edit...'
Tried to set the sensitivity on non-existent menu item '_Edit/Edit Text...'
Tried to set the sensitivity on non-existent menu item '_Edit/Slot...'
Tried to set the sensitivity on non-existent menu item '_Edit/Color...'
Tried to set the sensitivity on non-existent menu item '_Edit/Lock'
Tried to set the sensitivity on non-existent menu item '_Edit/Unlock'
Tried to set the sensitivity on non-existent menu item '_Edit/Line Width & Type...'
Tried to set the sensitivity on non-existent menu item '_Edit/Fill Type...'
Tried to set the sensitivity on non-existent menu item '_Edit/Embed Component/Picture'
Tried to set the sensitivity on non-existent menu item '_Edit/Unembed Component/Picture'
Tried to set the sensitivity on non-existent menu item '_Edit/Update Component'
Tried to set the sensitivity on non-existent menu item '_Buffer/Copy into 1'
Tried to set the sensitivity on non-existent menu item '_Buffer/Copy into 2'
Tried to set the sensitivity on non-existent menu item '_Buffer/Copy into 3'
Tried to set the sensitivity on non-existent menu item '_Buffer/Copy into 4'
Tried to set the sensitivity on non-existent menu item '_Buffer/Copy into 5'
Tried to set the sensitivity on non-existent menu item '_Buffer/Cut into 1'
Tried to set the sensitivity on non-existent menu item '_Buffer/Cut into 2'
Tried to set the sensitivity on non-existent menu item '_Buffer/Cut into 3'
Tried to set the sensitivity on non-existent menu item '_Buffer/Cut into 4'
Tried to set the sensitivity on non-existent menu item '_Buffer/Cut into 5'
Tried to set the sensitivity on non-existent menu item 'Hie_rarchy/_Down Schematic'
Tried to set the sensitivity on non-existent menu item 'Hie_rarchy/Down _Symbol'
Tried to set the sensitivity on non-existent menu item 'Hie_rarchy/D_ocumentation...'
Tried to set the sensitivity on non-existent menu item 'A_ttributes/_Attach'
Tried to set the sensitivity on non-existent menu item 'A_ttributes/_Detach'
Tried to set the sensitivity on non-existent menu item 'A_ttributes/Show _Value'
Tried to set the sensitivity on non-existent menu item 'A_ttributes/Show _Name'
Tried to set the sensitivity on non-existent menu item 'A_ttributes/Show _Both'
Tried to set the sensitivity on non-existent menu item 'A_ttributes/_Toggle Visibility'
Tried to set the sensitivity on non-existent menu item '_Buffer/Paste from 1'
Tried to set the sensitivity on non-existent menu item '_Buffer/Paste from 2'
Tried to set the sensitivity on non-existent menu item '_Buffer/Paste from 3'
Tried to set the sensitivity on non-existent menu item '_Buffer/Paste from 4'
Tried to set the sensitivity on non-existent menu item '_Buffer/Paste from 5'
Tried to set the sensitivity on non-existent menu item '_Edit/_Paste'

[markemer (Mark Anderson)]

Something seriously wacky is going on here. I had it working, but I was able to replicate on a 100% fresh install. Trying to narrow it down. It appears to be something incompatible between geda and the latest guile.

[craignied@…]

Thanks! The disappointment of not having this working is actually less than reading the words "something seriously wacky" :) Thanks for looking into it.

[markemer (Mark Anderson)]

Seems we're not the first to experience this from upstream, but there isn't a lot of info out there. I'm going to try and build from git and see if it goes away. If so - I might want to just grab a tag from git that I know works reliably.

[craignied@…]

Replying to emer@…:

Seems we're not the first to experience this from upstream, but there isn't a lot of info out there. I'm going to try and build from git and see if it goes away. If so - I might want to just grab a tag from git that I know works reliably.

1.6.2 seems to work, so I'm hanging on to that for a while. Let me know if you figure it out!

[thomasrussellmurphy (Thomas Russell Murphy)]

I have the exact same error log. Mac OS 10.6.8, MacPorts 2.2.1, geda-gaf 1.8.2.

[markemer (Mark Anderson)]

I think might take a while to fix. Information upstream is pretty lousy. This problem exists in both stable and unstable. I'm not sure if we should roll back to 1.6.2 or wait until I get this patched. I'm leaning toward the latter, but let me know what the opinion is.

[craignied@…]

Replying to emer@…:

I think might take a while to fix. Information upstream is pretty lousy. This problem exists in both stable and unstable. I'm not sure if we should roll back to 1.6.2 or wait until I get this patched. I'm leaning toward the latter, but let me know what the opinion is.

I'm running 1.6.2 now because I need gEDA :) I'm concerned about other users new to gEDA who won't be able to use it. I'd vote for moving it back until it's fixed, but *please* keep working on it, and many thanks for doing so!!

[thomasrussellmurphy (Thomas Russell Murphy)]

Replying to craignied@…:

Replying to emer@…:

I think might take a while to fix. Information upstream is pretty lousy. This problem exists in both stable and unstable. I'm not sure if we should roll back to 1.6.2 or wait until I get this patched. I'm leaning toward the latter, but let me know what the opinion is.

I'm running 1.6.2 now because I need gEDA :) I'm concerned about other users new to gEDA who won't be able to use it. I'd vote for moving it back until it's fixed, but *please* keep working on it, and many thanks for doing so!!

You should roll back. I was hoping to start a schematic this weekend and couldn't. I tried just reinstalling with the 1.6.2 portfile, but I was missing the correct libpng version, so I gave up. Functional on install > bigger version number.

[markemer (Mark Anderson)]

Can someone with commit access revert this portfile back to the previous, or would it be easier for me to manually make it 1.6.2 again until I fix this nonsense?

[larryv (Lawrence Velázquez)]

Rolled back in r113142. Users with 1.8.2 will get 1.6.2 on next sync+upgrade.

[thomasrussellmurphy (Thomas Russell Murphy)]

Revert successful. Now have

$ port installed geda-gaf
The following ports are currently installed:
  geda-gaf @1.6.2_0 (active)
  geda-gaf @1.6.2_1
  geda-gaf @1.8.2_0

And gschem launches properly.

[markemer (Mark Anderson)]

Cool. Ok, now I'll get to fixing this. It's a problem upstream that needs patching.

[larryv (Lawrence Velázquez)]

I’m considering this ticket fixed. Use #41660 to track 1.8.2 update.