QGIS @2_18_2_2: QSCINTILLA_LIBRARY NOTFOUND

[ChrisFr]

Fails to configure - seemingly a problem related to py27-qscintilla.

Does not appear to be related to #53373/#53231.

[ChrisFr]

main log

[ChrisFr]

console log

[ryandesign (Ryan Carsten Schmidt)]

The log says the error is:

:info:configure CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
:info:configure Please set them or make sure they are set and tested correctly in the CMake files:
:info:configure QSCINTILLA_LIBRARY
:info:configure     linked by target "qgis_gui" in directory /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2/src/gui

[SiggyF]

The name of the library that it should find is /opt/local/libexec/qt4/lib/libqscintilla2_qt4.dylib . The libraries where cmake is looking for are "qscintilla2 libqscintilla2 libqscintilla2.dylib". I think the cmake configuration should be changed to search for the name qscintilla2_qt4 or libqscintilla2_qt4.dylib. The same problem will likely occur if qt5 is used, the library is then called "/opt/local/libexec/qt5/lib/libqscintilla2_qt5.dylib" (from the port contents of qscintilla2).

[basmac]

Removed macports, started rebuilding using gcc6 as default. Everything built except QGIS

-- The C compiler identification is AppleClang 8.0.0.8000042
-- The CXX compiler identification is AppleClang 8.0.0.8000042
-- Check for working C compiler: /usr/bin/clang
-- Check for working C compiler: /usr/bin/clang -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/clang++
-- Check for working CXX compiler: /usr/bin/clang++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- QGIS version: 2.18.2 Las Palmas (21802)
-- Looking for openpty
-- Looking for openpty - found
-- Found Proj: /opt/local/lib/libproj.dylib
-- Found GEOS: /opt/local/lib/libgeos_c.dylib (3.6.1)
-- Found GDAL: /opt/local/lib/libgdal.dylib (2.1.2)
-- Found Expat: /opt/local/lib/libexpat.dylib
-- Found Spatialindex: /opt/local/lib/libspatialindex.dylib
-- Found Qwt: /opt/local/libexec/qt4/lib/libqwt.dylib (6.1.3)
-- Found Sqlite3: /opt/local/lib/libsqlite3.dylib
-- Found PostgreSQL: /opt/local/lib/postgresql96/libpq.dylib
-- Found SpatiaLite: /opt/local/lib/libspatialite.dylib
-- Looking for gaiaDropTable in /opt/local/lib/libspatialite.dylib
-- Looking for gaiaDropTable in /opt/local/lib/libspatialite.dylib - found
-- Looking for gaiaStatisticsInvalidate in /opt/local/lib/libspatialite.dylib
-- Looking for gaiaStatisticsInvalidate in /opt/local/lib/libspatialite.dylib - found
-- Looking for spatialite_init_ex in /opt/local/lib/libspatialite.dylib
-- Looking for spatialite_init_ex in /opt/local/lib/libspatialite.dylib - found
-- Qt WebKit support enabled
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - not found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - found
-- Looking for QT_MAC_USE_COCOA
-- Looking for QT_MAC_USE_COCOA - found
-- Found Qt4: /opt/local/libexec/qt4/bin/qmake (found suitable version "4.8.7", minimum required is "4.8.0")
-- Found Qt version: 4.8.7
-- Touch support disabled
-- Found QCA: /opt/local/libexec/qt4/lib/libqca.dylib (2.1.0)
-- Found QCA OpenSSL plugin
-- Pedantic compiler settings enabled
-- Found PythonInterp: /opt/local/bin/python2.7 (found suitable version "2.7.13", minimum required is "2.7")
-- Found PythonInterp: /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python (found suitable version "2.7.13", minimum required is "2.7")
-- Found Python executable: /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python
-- Found Python version: 2.7.13
-- Found Python library: /opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python
-- Found PyQt4 version: 4.12
-- Found SIP version: 4.19.1
-- Found QScintilla2 PyQt module: 2.10
-- Found GSL: -L/opt/local/lib -lgsl -lgslcblas
-- Found FCGI: /opt/local/lib/libfcgi.dylib
-- txt2tags not found - disabled
-- Ctest Binary Directory set to: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2/build/output/bin
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
QSCINTILLA_LIBRARY
    linked by target "qgis_gui" in directory /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2/src/gui

-- Configuring incomplete, errors occurred!
See also "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2/build/CMakeFiles/CMakeOutput.log".
See also "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2/build/CMakeFiles/CMakeError.log".
Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2/build" && cmake .. -DCMAKE_INSTALL_PREFIX='/opt/local' -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_C_COMPILER="$CC" -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_CXX_COMPILER="$CXX" -DCMAKE_FIND_FRAMEWORK=LAST -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_INSTALL_RPATH=/opt/local/lib -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_VERBOSE_MAKEFILE=ON -Wno-dev -DPYTHON_EXECUTABLE=/opt/local/bin/python2.7 -DWITH_GRASS=OFF -DWITH_GRASS7=OFF -DWITH_QWTPOLAR=FALSE -DGIT_MARKER=NOTFOUND -DENABLE_TEST=NO -DCMAKE_CXX_COMPILER=/usr/bin/clang++ -DCMAKE_C_COMPILER=/usr/bin/clang -DEXPAT_INCLUDE_DIR=/opt/local/include -DEXPAT_LIBRARY=/opt/local/lib/libexpat.dylib -DCMAKE_INSTALL_PREFIX=/Applications/MacPorts -DQGIS_MACAPP_BUNDLE=0 -DGDAL_CONFIG=/opt/local/bin/gdal-config -DGDAL_INCLUDE_DIR=/opt/local/include -DGDAL_LIBRARY=/opt/local/lib/libgdal.dylib -DGEOS_CONFIG=/opt/local/bin/geos-config -DGEOS_INCLUDE_DIR=/opt/local/include -DGEOS_LIBRARY=/opt/local/lib/libgeos_c.dylib -DGSL_CONFIG=/opt/local/bin/gsl-config -DPROJ_INCLUDE_DIR=/opt/local/include -DPROJ_LIBRARY=/opt/local/lib/libproj.dylib -DSPATIALINDEX_LIBRARY=/opt/local/lib/libspatialindex.dylib -DCMAKE_BUILD_TYPE=RELEASE -DENABLE_QT5=OFF -DPYTHON_CUSTOM_FRAMEWORK=/opt/local/Library/Frameworks/Python.framework/Versions/2.7 -DSIP_BINARY_PATH=/opt/local/bin/sip-2.7 -DPYUIC_PROGRAM=/opt/local/bin/pyuic4-2.7 -DPYRCC_PROGRAM=/opt/local/bin/pyrcc4-2.7 -DWITH_SERVER=TRUE -DWITH_SERVER_PLUGINS=TRUE -DQWT_INCLUDE_DIR=/opt/local/libexec/qt4/include/qwt -DQWT_LIBRARY=/opt/local/libexec/qt4/lib/libqwt.dylib -DQCA_INCLUDE_DIR=/opt/local/libexec/qt4/include/QtCrypto -DQCA_LIBRARY=/opt/local/libexec/qt4/lib/libqca.dylib -DPOSTGRES_CONFIG=/opt/local/lib/postgresql96/bin/pg_config -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_DEPLOYMENT_TARGET="10.11" -DCMAKE_OSX_SYSROOT="/" /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/work/QGIS-2_18_2
Exit code: 1
Error: Failed to configure QGIS: configure failure: command execution failed
DEBUG: Error code: NONE
DEBUG: Backtrace: configure failure: command execution failed
    while executing
"$procedure $targetname"
Error: See /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_gis_qgis/QGIS/main.log for details.
Error: Follow https://guide.macports.org/#project.tickets to report a bug.
Error: Processing of port QGIS failed
[mac02:/opt/local/lib] root#

[Veence (Vincent)]

Yeah, I know, this is going to be solved once I have overpassed a last hurdle

[basmac]

Just a note, although the build of QGIS gave no errors on ElCap and Sierra, I had to remove /Applications/MacPorts/QGIS.app, then build to get the new working QGIS.app to appear.