New Ticket     Tickets     Wiki     Browse Source     Timeline     Roadmap     Ticket Reports     Search

Timeline


and

03/23/08:

23:27 Changeset [35286] by jmr@…
yaz: update to 3.0.26, add livecheck
22:58 Changeset [35285] by jmr@…
sdlconsole: livecheck regex
22:23 Changeset [35284] by jmr@…
paq8: bump version to 8o9, add livecheck.
21:24 Changeset [35283] by jmr@…
iozone: add livecheck regex.
21:16 Changeset [35282] by jmr@…
dnsupdate: add livecheck regexes.
20:07 Changeset [35281] by jmr@…
bazaar: can't do a livecheck.
19:26 Ticket #14765 (geneweb: can't save) created by forums@…
Hi, I installed geneweb through macports and was able to import a GEDCOM …
18:59 Ticket #14764 (Update transcode portfile) closed by jmr@…
fixed: Thanks, committed in r35280.
18:58 Changeset [35280] by jmr@…
transcode: update from maintainer, see #14764.
16:59 Ticket #14764 (Update transcode portfile) created by cremes@…
Update the transcode portfile so that it builds and runs reliably under …
15:00 SummerOfCode edited by jmpp@…
(diff)
14:58 SummerOfCode edited by jmpp@…
(diff)
13:46 Changeset [35279] by epimenov@…
Tracelib 1) I allow /Developer, not only /Developer/Headers. Because …
12:44 Changeset [35278] by dluke@…
Total number of ports parsed: 4574 Ports successfully parsed: 4574 …
11:27 Ticket #14763 (RFE: please update minicom (2.1 --> 2.3)) created by jpo@…
Current port version : minicom 2.1, Revision 2 Latest upstream release …
11:11 Ticket #14762 (RFE: please update lftp (3.6.1 --> 3.6.3 or 3.7.0)) created by jpo@…
Current lftp port version: 3.6.1. The page http://lftp.yar.ru/get.html
10:10 Changeset [35277] by landonf@…
Include kerberos support in the build by default. It's not enabled unless …
09:11 Changeset [35276] by akira@…
Updated my mail address
08:54 Changeset [35275] by jberry@…
obfuscate my maintainer email addresses
08:46 Ticket #14761 (Cannot build proctools on Leopard) created by akira@…
[…]
08:34 Ticket #14670 (py25-twisted conflicts with py-twisted) closed by akira@…
fixed: committed in r35274
08:34 Changeset [35274] by akira@…
Fixed doc bin conflicts
08:28 Ticket #14235 (UPDATE: pylons 0.9.6.1 for Python 2.4/2.5) closed by akira@…
fixed: All patches are committed. Closing.
08:26 Changeset [35273] by akira@…
Synced with py25-WebHelpers
08:17 Changeset [35272] by akira@…
Synced with py25-simplejson
08:14 Changeset [35271] by akira@…
Synced with py25-route
08:13 Changeset [35270] by akira@…
Synced with py25-pastescript
08:10 Changeset [35269] by akira@…
Synced with py25-formencode
08:09 Changeset [35268] by akira@…
Synced with py25-formencode
08:05 Changeset [35267] by akira@…
Synced with py25-nose
08:01 Changeset [35266] by akira@…
Synced with py25-formencode
07:49 Changeset [35265] by akira@…
synced with py25-beaker
07:34 Changeset [35264] by akira@…
Updaed my mail address
07:20 Ticket #14549 (NEW: innotop - MySQL and InnoDB monitor) closed by akira@…
fixed: committed in r35263
07:16 Changeset [35263] by akira@…
Added a new port: p5-innotop
06:13 Ticket #14760 (odcctools extract fails with "Command output: odcctools already exists. ...) closed by reiffert@…
fixed
05:58 Ticket #14760 (odcctools extract fails with "Command output: odcctools already exists. ...) created by macports.users@…
[…]
04:50 Ticket #14727 (Bug: py-pyobjc build failure) closed by jmr@…
duplicate: Duplicate of #13287.
04:13 MacPortsDevelopers edited by akira@…
(diff)
02:27 Ticket #13028 (BUG: sqlite3 fails to compile) reopened by asf@…
I started seeing this lately, as did this macports user: …
01:51 Ticket #14759 (ice-python should contain variants for python24 and python25) created by aronnax@…
ice-python currently depends on python24, but I am using python25 for …
01:30 Changeset [35262] by rhwood@…
Since Pallet is intended to be installed by MacPorts, there is no need for …
00:45 Changeset [35261] by dluke@…
Total number of ports parsed: 4573 Ports successfully parsed: 4573 …
00:16 Ticket #14021 (Python23 won't compile under Leopard) closed by jmr@…
fixed: This should be fixed by r35260.
00:16 Changeset [35260] by jmr@…
python23: fix building on Leopard. Closes #14021.

03/22/08:

23:50 Ticket #14758 (libfuse: Symbol not found: ___CFConstantStringClassReference) created by sfiera@…
I was attempting to create a python25 version of fuse-bindings-python. …
23:28 Ticket #14135 (dyld: Library not loaded: libdlna.dylib.0.2.3) closed by sfiera@…
fixed: Assuming this is fixed.
23:19 Ticket #14757 (OpenGL and GLUT packages missing in ghc 6.8.2) created by nextAaron@…
I install ghc by CacPorts and find that there are no OpenGL and GLUT. I do …
21:49 Ticket #14756 (ice-cpp: No platform variant for Leopard (darwin 9) causes build to fail ...) created by aronnax@…
On Leopard (darwin 9), build fails because the environment variables CC, …
21:15 Changeset [35259] by jmr@…
python23: work around gnutar build failure on Leopard (#13462). Will still …
20:56 Ticket #14753 (New portfile for radlib v2.7.4) closed by jmr@…
fixed: Thanks, committed in r35258.
20:55 Changeset [35258] by jmr@…
radlib: update to 2.7.4, from maintainer in #14753.
20:39 Ticket #14755 (alpine tarball not found (update or use gzip)) closed by jmr@…
duplicate: Duplicate of #14747.
18:32 Ticket #14755 (alpine tarball not found (update or use gzip)) created by liontooth@…
The current portfile looks for a tarball that is not found in the …
15:31 Changeset [35257] by wsiegrist@…
added distfiles to port manpage
15:18 Changeset [35256] by wsiegrist@…
added checksum display and an early exit when master_sites is not provided
13:52 Ticket #14754 (Portfile for wview v3.7.3) created by mbrooksclark@…
New portfile for the latest release of wview
13:49 Ticket #14753 (New portfile for radlib v2.7.4) created by mbrooksclark@…
Portfile updated for new release of radlib
12:45 Changeset [35255] by dluke@…
Total number of ports parsed: 4573 Ports successfully parsed: 4573 …
11:44 Changeset [35254] by ram@…
py-boto/py25-boto: update to 1.1c
11:29 Ticket #14730 (py25-libxml2 2.6.21_1 fails to build) closed by sfiera@…
worksforme: Since this seems to be a problem with the python25 portgroup, rather than …
10:18 Changeset [35253] by mww@…
version 4.4-20080321
08:37 Ticket #14752 (Request New Port: lua-gd) created by mbly@…
To complement the existing gd2 and lua ports, it would be great to have a …
08:05 Ticket #14751 (Cannot configure yelp -required by gnucash-docs) created by ddimes@…
When trying to install gnucash-docs, yelp fails to install/configure. I …
04:01 Changeset [35252] by ryandesign@…
ImageMagick: update to 6.3.9-9 All 696 tests behaved as expected (33 …
03:24 Changeset [35251] by ryandesign@…
wine: update to 0.9.58
03:11 Ticket #14750 (Crash in freetype) created by guy.linton@…
freetype crashes with a Bus error on PPC G5: […] Note the following …
00:45 Changeset [35250] by dluke@…
Total number of ports parsed: 4573 Ports successfully parsed: 4573 …
00:34 Ticket #14749 (gtk2 fail to build on Mac Book air intel OS 10.5.2) created by vpvadistance@…
I just install macports on my new mac book air, the installation of gtk2 …

03/21/08:

22:22 Changeset [35249] by wsiegrist@…
Add distfiles command for listing each distfile for a given port spec and …
21:47 Changeset [35248] by landonf@…
Now that heimdal is no longer to be installed in ${prefix}, it's safe to …
21:45 Changeset [35247] by landonf@…
Put heimdal in a seperate prefix. No other ports depend on it, it …
21:11 Ticket #14748 (Update port links to version 2.1pre33) created by blb@…
Will attach a diff to the www/links Portfile to update it to version …
20:33 Ticket #14747 (Upgrade for Alpine) created by todmorrison@…
A user noted that "ftp://ftp.cac.washington.edu/alpine/" switched to …
16:37 Ticket #14742 (UPDATE: gconf-editor to 2.22.0 and register schema file with gconf) closed by reiffert@…
fixed: I integrated the news from #14729 into your patch and committed in r35246. …
16:36 Changeset [35246] by reiffert@…
gconf-editor: update to 2.22.0, Closes #14742, lint
16:21 Changeset [35245] by reiffert@…
gnucash: Remove duplicate lines in Portfile
16:19 Ticket #14734 (gnucash activation fails with +without_hbci variant set) closed by reiffert@…
fixed: For now r35244 fixes it for port:gnucash.
16:17 Changeset [35244] by reiffert@…
Improve the gconf situation as per #14729, close #14734, increase revision
15:10 Ticket #14746 (ffmpeg broken with variants) created by bazzoola@…
This is the last version I could compile. ffmpeg …
14:56 Changeset [35243] by dluke@…
New port, dar (disk archiver).
14:51 Ticket #14745 (py25-id3lib 0.5.1 new portfile) created by waterson@…
I've created a Portfile for pyid3lib vs. Python 2.5. It's mostly the …
14:05 Changeset [35242] by ryandesign@…
winetricks: update to 20080321 (adds Microsoft Line Services 3.1 option)
13:40 Changeset [35241] by brett@…
update from Nick Ludlam
13:13 Ticket #14744 (libsdl_mixer-framework 1.2.8 seems to be broken; I hope this is no ...) created by phw@…
Trying to isntall libsdl_mixer-framework it crashes for me. OS is 10.5.2, …
12:45 Changeset [35240] by dluke@…
Total number of ports parsed: 4572 Ports successfully parsed: 4572 …
12:01 FAQ edited by wsiegrist@…
(diff)
12:01 FAQ edited by wsiegrist@…
Add the common "compiler cannot create executables" error when XCode isnt … (diff)
10:52 Ticket #12949 (BUG: libpcap 0.9.5, Revision 1 fails to compile) reopened by jim@…
At least for me, even 0.9.8 doesn't build. […] […] […]
10:00 Ticket #14743 (RFE : Add php5-eaccelerator port) created by alakazam@…
Attached is a proposal for a Portfile for eaccelerator …
09:56 Ticket #14742 (UPDATE: gconf-editor to 2.22.0 and register schema file with gconf) created by db.evans@…
Attached is a patch to update gconf-editor to the current 2.22.0 version …
08:57 Ticket #14741 (Checksum error for installing dialog) created by noelrappin@…
[…] I think this checksum was just updated.. is it possible something …
07:54 Ticket #14740 (Add py25-pmw) created by schimaf@…
py-pmw appears to want python 2.4. We need a version for python 2.5.
06:21 Changeset [35239] by jwa@…
version bump to 20080316, add md5 checksum, make ncursesw dependency …
06:09 Changeset [35238] by jwa@…
version bump to 8.3.1
06:09 Changeset [35237] by jwa@…
version bump to 8.3.1
06:09 Changeset [35236] by jwa@…
version bump to 8.3.1
05:57 Ticket #14739 (Port MPKG Creation error) created by jpollock1@…
Attempting to use sudo port mpkg nmap to create an install metapackage for …
05:54 Changeset [35235] by jwa@…
version bump to 8.2.7
05:53 Changeset [35234] by jwa@…
version bump to 8.2.7, add rmd160 checksum
05:45 Changeset [35233] by jwa@…
version bump to 8.2.7, add rmd160 checksum
05:45 Changeset [35232] by mww@…
version 4.5
05:43 Changeset [35231] by jmr@…
dnsupdate27: correct path to built app
05:36 Changeset [35230] by mww@…
version 1.5a89
05:17 Ticket #14737 (No manual entry for port on German OS X 10.5.2) closed by raimue@…
invalid: It's already in the guide, http://guide.macports.org/#installing.shell
05:15 Ticket #14738 (glibmm fails to built on OS X 10.4.11) created by Martin.Buchmann@…
Hi, I am not sure if this issue has been reported before. There are some …
04:46 Changeset [35229] by brett@…
new beanstalkd patch
04:46 Changeset [35228] by brett@…
update to 0.9
03:04 Ticket #14737 (No manual entry for port on German OS X 10.5.2) created by stephan@…
On a German OS X 10.5.2 I cannot use man for port: […] Obviously it …
02:52 Ticket #13555 (boost @1.34_1: does not enable ICU support even if +icu is specified) closed by jmr@…
fixed: Committed in r35227.
02:51 Changeset [35227] by jmr@…
boost: enable ICU correctly. Closes #13555.
02:45 Ticket #14736 (GiNaC stable version changed to 1.4.1) created by aronnax@…
The GiNaC stable version has changed to 1.4.1. Older source distributions …
02:39 Ticket #14735 (scons-0.97 Change Python version from python24 to python25) created by aronnax@…
scons is the only package that I use that depends on python24. I use …
02:05 Ticket #14734 (gnucash activation fails with +without_hbci variant set) created by mp@…
When the +without_hbci variant is set, the post-activate stage fails …
01:40 Ticket #14733 (NEW Portfile for py-pyqt4) created by tim.stoop@…
Hi there, I created a Portfile for py-pyqt4. It works for me, so I hope …
00:44 Changeset [35226] by dluke@…
Total number of ports parsed: 4572 Ports successfully parsed: 4572 …

03/20/08:

23:31 Changeset [35225] by eridius@…
Auto-page any output of ports.php that exceeds the pagesize
23:09 Changeset [35224] by eridius@…
Page numbers should start at 1
23:04 Changeset [35223] by eridius@…
Add fairly simple implementation of paging to the by=all view
22:34 Changeset [35222] by jmpp@…
You did miss one! :-P Also moved the print_header() function call to just …
22:29 Changeset [35221] by eridius@…
Return zero ports if the user changes the by query parameter to something …
22:22 Changeset [35220] by eridius@…
Clean up ports.php some more by converting to double quotes & variable …
21:56 Changeset [35219] by eridius@…
Clean up the criteria matching for the ports list
21:55 Changeset [35218] by jmpp@…
Remove unnecessary comments.
21:23 Changeset [35217] by jmpp@…
Platforms are mandatory in our Portfiles, so displaying empty lines for …
21:22 Changeset [35216] by jmpp@…
Always use mysql_fetch_row() when fetching a port's properties and access …
21:22 Ticket #13600 (xrender 0.9.0 build fails: 'xRenderAddTrapsReq' undeclared (first use in ...) reopened by ulf.moehring@…
I tried to upgrade to the current version of xrender and get the same …
21:01 Changeset [35215] by jmpp@…
Reindent, no functional changes.
20:36 Changeset [35214] by jmpp@…
Big commit but with no functional changes but one: * Finally eliminated …
20:25 Ticket #14716 (irssistats-0.75 update) closed by jmr@…
fixed: Thanks, updated in r35213.
20:24 Changeset [35213] by jmr@…
irssistats: bump version to 0.75, fix compilation. Closes #14716.
18:45 Ticket #14542 (py25-hashlib doesn't compile: "unable to execute -DNDEBUG") closed by raimue@…
duplicate: Duplicate of #13930.
18:32 Ticket #14620 (vim-app 7.1.* improvement to display stdin) closed by raimue@…
fixed: This works for the case using 'gvim -' only, not then also specifying …
18:31 Changeset [35212] by raimue@…
editors/vim-app: Update for the gvim.sh script to also work with stdin, …
17:35 Changeset [35211] by wsiegrist@…
Use proper mail headers. Also cleaned up some variable case and layout …
15:07 Ticket #13645 (git-core activation error) closed by ryandesign@…
fixed: This problem has been fixed in r34462.
14:46 Changeset [35210] by rowue@…
removed newline
14:40 Changeset [35209] by rowue@…
Bad ugly workaround for bug in communication with non-otr clients
14:25 Ticket #14732 (desktop-file-utils 0.15_0 cannot be activated) created by stephan@…
On an intel iMac using 10.5.2 I have seen this error: […] However, if I …
14:15 Ticket #14731 (p5-getopt-long 2.37_0 cannot be staged into destroot) created by stephan@…
During an install of gnucash on an intel iMac using OS X 10.5.2 I ran into …
14:06 Ticket #14730 (py25-libxml2 2.6.21_1 fails to build) created by stephan@…
I tried to install gnucash on an Intel iMac using OS X 10.5.2 but ran into …
12:46 Changeset [35208] by dluke@…
Total number of ports parsed: 4572 Ports successfully parsed: 4572 …
10:16 Changeset [35207] by markd@…
Linted.
10:13 Changeset [35206] by markd@…
Update to 5.04.
10:05 Changeset [35205] by markd@…
Update to 1.3.9.
09:15 Ticket #14705 (gnome/gail-1.22.0 fails to build with quartz variant) closed by gui_dos@…
fixed: Fixed in r35153.
08:53 Ticket #14477 (Updated SWI-Prolog portfile to version 5.6.51) closed by jmr@…
duplicate: Replying to pmoura@logtalk.org: > What's the relation between …
08:48 Ticket #13610 (ntop 3.3_0 fails to build) closed by markd@…
fixed: Committed as revision 1 to the port. That seems to have solved the …
08:48 Ticket #14710 (Updated swi-prolog portfile to version 5.6.52) closed by jmr@…
fixed: Thanks, committed in r35204.
08:47 Changeset [35204] by jmr@…
swi-prolog: bump version to 5.6.52. Closes #14710.
08:44 Changeset [35203] by markd@…
Closes #13610. Apply contributed patch.
08:38 Ticket #14709 (Updated swi-prolog-lite portfile to version 5.6.52) closed by jmr@…
fixed: Thanks, committed in r35202.
08:38 Changeset [35202] by jmr@…
swi-prolog-lite: bump version to 5.6.52. Closes #14710.
07:34 Changeset [35201] by narf_tm@…
Updated to 2.3.0.
07:28 Changeset [35200] by narf_tm@…
Updated to 1.26.
06:32 Changeset [35199] by simon@…
doc-new: Convert all sections (h1-h9) to links so it's easy to link to …
06:18 Ticket #14032 (update hevea to 1.10) closed by mww@…
fixed: commited.
06:18 Changeset [35198] by mww@…
version 1.10, #14032
03:15 Ticket #14729 (gnome installations do not register the schema files with gconf) created by reiffert@…
Gnome ports install schema files to ${prefix}/etc/gconf/schema/ Those …
03:12 Ticket #14728 (gnome installations do not register the schema files with gconf) closed by reiffert@…
invalid: Forgot the place all gnome maintainers to the initial message. Closing and …
03:10 Ticket #14728 (gnome installations do not register the schema files with gconf) created by reiffert@…
Gnome ports install schema files to ${prefix}/etc/gconf/schema/ Those …
03:05 Ticket #12960 (gnome-vfs 2.20.0_1 fails on MacOS 10.3.9) closed by reiffert@…
fixed: gnome-vfs is 2.22.0 now. Please sync and try that one. Please open a new …
02:25 Changeset [35197] by reiffert@…
gnucash: * Register schemas to gconf * Integrate guile16 variant as it …
02:24 Changeset [35196] by afb@…
use explicit external tclthread/sqlite3/gnuobjc/gnustep for configure
02:22 Changeset [35195] by afb@…
fix typo in workaround (interactive installs are evil)
02:10 Changeset [35194] by reiffert@…
gnome-vfs: Register the schema files to gconf. Lint. Revision++.
02:08 Changeset [35193] by eridius@…
Fix WHERE issue introduced in r35151 that broke the all ports listing
01:55 Changeset [35192] by reiffert@…
Register the yelp schema with gconf in post-activate
00:52 Changeset [35191] by ram@…
devel/bzrtools: update to 1.3.0
00:52 Changeset [35190] by ram@…
devel/bzr: update to 1.3
00:44 Changeset [35189] by dluke@…
Total number of ports parsed: 4572 Ports successfully parsed: 4572 …

03/19/08:

21:01 Ticket #14727 (Bug: py-pyobjc build failure) created by efolmer@…
I tried to install py-game but I get the following error: Intel Mac …
20:04 Changeset [35188] by takeshi@…
nco: updated to 3.9.4. added livecheck
19:03 Ticket #14726 (Update port nasm to version 2.02) created by blb@…
Will attach a diff to update the lang/nasm port to version 2.02.
18:41 Changeset [35187] by ram@…
py-boto/py25-boto: update to 1.1a
18:17 Ticket #14725 (powerpc-rtems-gcc doesn't compile under Leopard) created by nigel@…
Reports "Configuration i686-apple-darwin9.2.0 not supported". I presume …
16:58 Changeset [35186] by sfiera@…
New port lastmp
16:58 Changeset [35185] by sfiera@…
New port lastfmsubmitd
16:56 Changeset [35184] by sfiera@…
New port py25-mpdclient2, intended for lastmp
13:15 Changeset [35183] by reiffert@…
efte: Remove default_variants +x11, integrate variant x11, add variant …
12:50 Changeset [35182] by dluke@…
Total number of ports parsed: 4569 Ports successfully parsed: 4569 …
12:04 Changeset [35181] by narf_tm@…
Updated to 0.70.
12:04 Changeset [35180] by narf_tm@…
Updated to 2.14.
10:30 Changeset [35179] by blair@…
Enable the test suite.
10:30 Changeset [35178] by blair@…
New upstream 2.4.1 release.
09:57 Ticket #14724 (spamassassin overwrites user local.cf) created by synfinatic@…
Specifically, every upgrade overwrites the …
09:54 Changeset [35177] by mww@…
add missing dependency on p5-datemanip, inc. revision -- thanks to Rune …
09:17 Ticket #14723 (libbonobo won't install) created by dball@…
[…]
09:05 Changeset [35176] by jmr@…
dnsupdate: cleanups; remove useless reinplace, use file copy and file …
08:52 Changeset [35175] by jmr@…
dnsupdate27: do away with tarring altogether, and use file copy.
07:45 Changeset [35174] by jmr@…
dnsupdate27: remove strange tar argument reinplacement.
07:19 Ticket #14719 (Build failure: rdiff-backup-devel, 1.1.15) closed by blair@…
invalid: Closing as invalid, since no changes to the port were required.
06:50 Ticket #14722 (irssi build failure on 10.5.2) created by psychotic.anomaly@…
[…]
06:22 Ticket #14721 (php5: add --enable-zip) created by sven@…
The --enable-zip configure option is needed to enable the zip file …
02:47 Changeset [35173] by mww@…
version 1.249
02:39 Ticket #14720 (wxWidgets: wxMac threading bug) created by afb@…
The wxMac port of wxWidgets has some string code which is not thread safe, …
02:29 Changeset [35172] by afb@…
increase nightly build revision
01:59 Changeset [35171] by afb@…
use applications_dir and frameworks_dir instead of hardcoded paths
01:59 Changeset [35170] by jmr@…
squid: don't use cd, and don't create directories in undefined locations.
01:50 Ticket #14719 (Build failure: rdiff-backup-devel, 1.1.15) created by steve@…
Build fails on my Leopard machine. All other ports are up-to-date. Let …
01:42 Changeset [35169] by jmr@…
squid: take maintainership, add modeline.
01:24 Changeset [35168] by jmpp@…
* It's more common to call a connection handler 'handler' indeed, not …
01:10 Changeset [35167] by jmr@…
dnsupdate27: switch to using the xcode portgroup.
01:04 Changeset [35166] by reiffert@…
yelp lint happy
01:02 Changeset [35165] by reiffert@…
Updating yelp to 2.22.0 (gnome help browser)
00:50 Ticket #14718 (libgtkhtml3-3.16.3 fails to build) closed by reiffert@…
fixed: Hi, this was already fixed in r35084 on 2008-03-16 22:50:18. Please be …
00:47 Changeset [35164] by dluke@…
Total number of ports parsed: 4569 Ports successfully parsed: 4569 …
00:38 Ticket #14718 (libgtkhtml3-3.16.3 fails to build) created by junk@…
[…]
00:24 Ticket #14717 (Make a daily tarball of rsync tree and host at www.macports.org) created by wsiegrist@…
In case rsync and/or svn is blocked or unusable, provide a daily tarball …
Note: See TracTimeline for information about the timeline view.