wiki:howto/SetupFetchmail

Version 23 (modified by kurthindenburg (Kurt Hindenburg), 10 years ago) (diff)

add info about simple user setup

<- Back to the HOWTO section

How to set-up fetchmail

  • Audience: Advanced E-Mail setup
  • Requires: MacPorts >= 1.6, mail/fetchmail
  • Last tested with Mac OS X 10.9.3
  • Note that below instructions have been changed to work on Mavericks

Introduction

This How-to is part of the Fetchmail -> Postfix -> Dovecot advanced e-Mail set-up.

fetchmail fetchmail is program used to collect e-mail from internet service provider and transfers them to the local mail transfer agent for further distribution.

fetchmail can collect mail from various sources and for multiple users. With the setup described here the user does not need to start an Email_Client for collection to happen. In fact the user does not even need to be logged in.

Installation

First set-up a mail storage and a mail transfer agent . See Dovecot and Postfix a possible set-up. Fetchmail will not work without and you can lose your mail if those components are not set-up properly.

Fetchmail

If you want to configure fetchmail with a GUI, use the below command. Note that it requires that you have X11 installed and running.

sudo port install fetchmail +fetchmailconf +ssl 

Otherwise, use the below. You'll have to hand edit the fetchmailrc file.

sudo port install fetchmail +ssl 

Some older OSX version may come preinstalled with fetchmail (OSX 10.5). For this howto we will be using macports's version.

Configuration

Note: Do not use any of the attached files without checking / changing them with your favorite text editor. You will need to chmod +x the attached files in order to execute them.

Step 1: create user

Fetchmail does not need root or normal user privileges to run so it is suggested to create an unprivileged user and group for daemon based fetchmail configurations. You can use the Make_Fetchmail_User.command to do so. This attached shell script also has instructions to view and undo all the commands.

Step 2: create directories

Dovecot need two directories to work with - one to store the run status, one for the log files. You can use the Make_Fetchmail_Directories.command to create the directories.

/opt/local/var/log/fetchmail /opt/local/var/run/fetchmail

These also need to be owned by _fetchmail

sudo chown _fetchmail:_fetchmail /opt/local/var/log/fetchmail
sudo chown _fetchmail:_fetchmail /opt/local/var/run/fetchmail

Step 3: set-up configuration

Next you need to set up fetchmailrc and save it to /opt/local/etc. The file should be owned by _fetchmail:_fetchmail and only be readable to _fetchmail an no one else.

sudo chown _fetchmail:_fetchmail /opt/local/etc/fetchmailrc
sudo chmod 710 /opt/local/etc/fetchmailrc

Note:

  • The "ID-file" is used to store the message IDs of messages already downloaded. If you use the keep option with one of your mail sources to not delete messages on the server after downloading them the ID-file is used to prevent downloading these messages again on the next run of fetch mail.
  • It is highly recommended that you use the keep option in the fetchmailrc until you are sure everything is working O.K. This will keep the emails on the server while downloading a copy to your system.

Step 4: starting the daemon

Fetchmail is started using launchd which is controlled by macport's fetchmail installed /opt/local/etc/LaunchDaemons/org.macports.fetchmail/org.macports.fetchmail.plist

"Note:"

  • (As of Jun 2014), the .plist uses a wrapper that denotes the fetchmailrc file as /opt/local/etc/.fetchmail so unless you want to edit this file, create a link
    sudo ln -s /opt/local/etc/fetchmailrc /opt/local/etc/.fetchmail
    
  • (As of Jun 2014), change fetchmail.wrapper such that the Start() looks like the below.
    sudo vi /opt/local/etc/LaunchDaemons/org.macports.fetchmail/fetchmail.wrapper 
    
    Start()
    {
         /opt/local/bin/fetchmail -f /opt/local/etc/.fetchmail --daemon=1200 --nodetach
    }
    
  • (As of Jun 2014), org.macports.fetchmail.plist must be edited and these 2 lines added before the </dict></plist>
    sudo vi /opt/local/etc/LaunchDaemons/org.macports.fetchmail/org.macports.fetchmail.plist
    
    <key>UserName</key>
    <string>_fetchmail</string>
    

The attached Restart_Fetchmail.command command will stop and restart fetchmail which forces a re-read of the configuration files and triggers an immediate mail collection - quite helpful while debugging the system.

Note:

  • The logfile defined in fetchmailrc can only be used without --nodetach (see man fetchmail). With the configuration currently presented here everything will be logged to the system log.

Step 5: testing the deamon

Before using fetchmail you should collect all your mail by conventional means.

After starting fetchmail you should check if the start was successful by checking the syslog:

$ syslog
Thu Jun  5 21:20:42 macpro sudo[42916] <Notice>:   martin : TTY=ttys001 ; PWD=/opt/local/Applications/Utilities ; USER=root ; COMMAND=/bin/launchctl unload -w /Library/LaunchDaemons/org.macports.fetchmail.plist
Thu Jun  5 21:20:42 macpro sudo[42917] <Notice>:   martin : TTY=ttys001 ; PWD=/opt/local/Applications/Utilities ; USER=root ; COMMAND=/bin/launchctl load -w /Library/LaunchDaemons/org.macports.fetchmail.plist
Thu Jun  5 21:20:42 macpro sudo[42919] <Notice>:   martin : TTY=ttys001 ; PWD=/opt/local/Applications/Utilities ; USER=root ; COMMAND=/bin/launchctl start org.macports.fetchmail
Thu Jun  5 21:20:42 macpro org.macports.fetchmail[42918] <Notice>: fetchmail: starting fetchmail 6.3.8 daemon 
Thu Jun  5 21:20:48 macpro org.macports.fetchmail[42918] <Notice>: fetchmail: sleeping at Thu, 05 Jun 2008 21:20:48 +0200 (CEST) for 1800 seconds

Last you send yourself a mail and trigger a mail collection with Restart_Fetchmail.command and then check if the mail arrived in your local mail storage.

Simple User Configuration

Another possible way to setup fetchmail is to have your user run it.

Note: You will have to adjust the paths in the plist and sh files

Copy myuser.fetchmail.plist to /Library/LaunchDaemons/

Create /Users/myuser/devel/scripts/fetchmail-call.sh

#!/bin/bash

/opt/local/bin/fetchmail || [ $? -eq 1 ] 

Then, load the plist as usual.

Optional Parts

<- Back to the HOWTO section

Attachments (5)

Download all attachments as: .zip