Ticket #23107: boostInstallError2.txt

sudo port -d install boost +python26 icu libpng jpeg libgeotiff libxml2 freetype
Password:
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port boost.
DEBUG: Requested variant i386 is not provided by port boost.
DEBUG: Requested variant macosx is not provided by port boost.
DEBUG: Executing variant python26 provides python26
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3  is the latest installed
DEBUG: zlib 1.2.3_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python26 2.6.4_0 exists in the ports tree
DEBUG: python26 2.6.4_0 +darwin is the latest installed
DEBUG: python26 2.6.4_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python26.
DEBUG: Requested variant macosx is not provided by port python26.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8l_0 exists in the ports tree
DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
DEBUG: openssl 0.9.8l_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.8_0 exists in the ports tree
DEBUG: tk 8.5.8_0 +darwin is the latest installed
DEBUG: tk 8.5.8_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tk.
DEBUG: Requested variant macosx is not provided by port tk.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1  is the latest installed
DEBUG: pkgconfig 0.23_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.8_0 exists in the ports tree
DEBUG: tcl 8.5.8_0 +darwin is the latest installed
DEBUG: tcl 8.5.8_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tcl.
DEBUG: Requested variant macosx is not provided by port tcl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.14_0 exists in the ports tree
DEBUG: Xft2 2.1.14_0  is the latest installed
DEBUG: Xft2 2.1.14_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port Xft2.
DEBUG: Requested variant i386 is not provided by port Xft2.
DEBUG: Requested variant macosx is not provided by port Xft2.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0  is the latest installed
DEBUG: xrender 0.9.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant i386 is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0  is the latest installed
DEBUG: xorg-xproto 7.0.16_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0  is the latest installed
DEBUG: xorg-renderproto 0.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.2_0  is the latest installed
DEBUG: xorg-libX11 1.3.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.4.1_0 exists in the ports tree
DEBUG: xorg-util-macros 1.4.1_0  is the latest installed
DEBUG: xorg-util-macros 1.4.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.4.1_0 >= xorg-util-macros 1.4.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
DEBUG: xorg-xtrans 1.2.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
DEBUG: xorg-xextproto 7.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0  is the latest installed
DEBUG: xorg-inputproto 2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
DEBUG: xorg-kbproto 1.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: groff 1.20.1_1 exists in the ports tree
DEBUG: groff 1.20.1_1  is the latest installed
DEBUG: groff 1.20.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port groff.
DEBUG: Requested variant i386 is not provided by port groff.
DEBUG: Requested variant macosx is not provided by port groff.
DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0  is the latest installed
DEBUG: xorg-libXau 1.0.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.11_1 exists in the ports tree
DEBUG: freetype 2.3.11_1 +macosx is the latest installed
DEBUG: freetype 2.3.11_1 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.8.0_0 exists in the ports tree
DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
DEBUG: fontconfig 2.8.0_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Requested variant i386 is not provided by port fontconfig.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.1_0  is the latest installed
DEBUG: xorg-libXext 1.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.21_0 exists in the ports tree
DEBUG: sqlite3 3.6.21_0  is the latest installed
DEBUG: sqlite3 3.6.21_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant i386 is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.0.000_2 exists in the ports tree
DEBUG: readline 6.0.000_2 +darwin is the latest installed
DEBUG: readline 6.0.000_2 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
DEBUG: No need to upgrade! sqlite3 3.6.21_0 >= sqlite3 3.6.21_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6  is the latest installed
DEBUG: db46 4.6.21_6  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port db46.
DEBUG: Requested variant i386 is not provided by port db46.
DEBUG: Requested variant macosx is not provided by port db46.
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.8.3_2 exists in the ports tree
DEBUG: gdbm 1.8.3_2  is the latest installed
DEBUG: gdbm 1.8.3_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gdbm.
DEBUG: Requested variant i386 is not provided by port gdbm.
DEBUG: Requested variant macosx is not provided by port gdbm.
DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost-jam
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: boost-jam 3.1.17_0 exists in the ports tree
DEBUG: boost-jam 3.1.17_0  is the latest installed
DEBUG: boost-jam 3.1.17_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost-jam
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.1
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port boost-jam.
DEBUG: Requested variant i386 is not provided by port boost-jam.
DEBUG: Requested variant macosx is not provided by port boost-jam.
DEBUG: No need to upgrade! boost-jam 3.1.17_0 >= boost-jam 3.1.17_0
--->  Computing dependencies for boost
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: python26
DEBUG: Found Dependency: receipt exists for python26
DEBUG: Searching for dependency: boost-jam
DEBUG: Found Dependency: receipt exists for boost-jam
DEBUG: Executing org.macports.main (boost)
DEBUG: Skipping completed org.macports.fetch (boost)
DEBUG: Skipping completed org.macports.checksum (boost)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (boost)
DEBUG: Skipping completed org.macports.patch (boost)
DEBUG: Skipping completed org.macports.configure (boost)
--->  Building boost
DEBUG: Executing proc-pre-org.macports.build-build-0
DEBUG: Executing org.macports.build (boost)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0" && bjam -j2 -d2 --layout=tagged --debug-configuration --ignore-site-config --user-config=user-config.jam --without-mpi -sBZIP2_INCLUDE=/opt/local/include -sBZIP2_LIBPATH=/opt/local/lib -sZLIB_INCLUDE=/opt/local/include -sZLIB_LIBPATH=/opt/local/lib'
notice: found boost-build.jam at /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0/boost-build.jam
notice: loading Boost.Build from /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0/tools/build/v2
notice: Loading explicitly specified user configuration file:
    /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0/user-config.jam
notice: Searching /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0 for user-config configuration file user-config.jam .
notice: Loading user-config configuration file user-config.jam from /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0/user-config.jam .
notice: OSX version on this machine is 10.4.11
notice: will use '/usr/bin/g++-4.0' for darwin, condition <toolset>darwin-4.0.1
notice: using strip :: <toolset>darwin-4.0.1 :: /usr/bin/strip
notice: using archiver :: <toolset>darwin-4.0.1 :: /usr/bin/libtool
notice: available sdk :: <toolset>darwin-4.0.1/<macosx-version>10.3 :: /Developer/SDKs/MacOSX10.3.9.sdk
notice: available sdk :: <toolset>darwin-4.0.1/<macosx-version>10.4 :: /Developer/SDKs/MacOSX10.4u.sdk
notice: [python-cfg] Configuring python...
notice: [python-cfg]   user-specified cmd-or-prefix: "/opt/local/bin/python2.6"
notice: [python-cfg] Checking interpreter command "/opt/local/bin/python2.6"...
notice: [python-cfg] running command '"/opt/local/bin/python2.6" -c "from sys import *; print('version=%d.%d\nplatform=%s\nprefix=%s\nexec_prefix=%s\nexecutable=%s' % (version_info[0],version_info[1],platform,prefix,exec_prefix,executable))" 2>&1'
notice: [python-cfg] ...requested configuration matched!
notice: [python-cfg] Details of this Python configuration:
notice: [python-cfg]   interpreter command: "/opt/local/bin/python2.6"
notice: [python-cfg]   include path: "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6"
notice: [python-cfg]   library path: "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/config" "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib"
notice: [python-cfg] framework directory is "/opt/local/Library/Frameworks/Python.framework"
notice: iostreams: using prebuilt zlib
notice: iostreams: using prebuilt bzip2

Building the Boost C++ Libraries.

After the build, the headers will be located at
  
    /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0
    
The libraries will be located at  
    
    /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0/stage/lib
     
Use 'bjam install --prefix=<path>' if you wish to install headers and 
libraries to a different location and remove the source tree.


warning: Building Boost.Regex with the optional Unicode/ICU support disabled.
note: Please refer to the Boost.Regex documentation for more information
note: this is a strictly optional feature.
warning: Graph library does not contain optional GraphML reader.
note: to enable GraphML support, set EXPAT_INCLUDE and EXPAT_LIBPATH to the
note: directories containing the Expat headers and libraries, respectively.
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam
...patience...
...patience...
...patience...
...found 6977 targets...
...updating 7 targets...
darwin.link.dll stage/lib/libboost_program_options-mt.dylib

    "/usr/bin/g++-4.0" -dynamiclib -Wl,-single_module -install_name "/opt/local/lib/libboost_program_options-mt.dylib"  -o "stage/lib/libboost_program_options-mt.dylib" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/cmdline.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/config_file.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/options_description.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/parsers.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/variables_map.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/value_semantic.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/positional_options.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/utf8_codecvt_facet.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/convert.o" "bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/winmain.o"      -headerpad_max_install_names -Wl,-dead_strip -no_dead_strip_inits_and_terms 

ld: bin.v2/libs/program_options/build/darwin-4.0.1/release/threading-multi/winmain.o r_address (0xc3762) field of relocation entry 140 in section (__DWARFA,__debug_info) out of range
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/libtool: internal link edit command failed
...failed darwin.link.dll stage/lib/libboost_program_options-mt.dylib...
darwin.link.dll stage/lib/libboost_serialization-mt.dylib

    "/usr/bin/g++-4.0" -dynamiclib -Wl,-single_module -install_name "/opt/local/lib/libboost_serialization-mt.dylib"  -o "stage/lib/libboost_serialization-mt.dylib" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_archive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_iserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_oserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_pointer_iserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_pointer_oserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_serializer_map.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_text_iprimitive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_text_oprimitive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_xml_archive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/binary_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/binary_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/extended_type_info.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/extended_type_info_typeid.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/extended_type_info_no_rtti.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/polymorphic_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/polymorphic_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/stl_port.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/text_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/text_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/void_cast.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/archive_exception.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_grammar.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_archive_exception.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/shared_ptr_helper.o"      -headerpad_max_install_names -Wl,-dead_strip -no_dead_strip_inits_and_terms 

ld: bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/stl_port.o r_address (0x23d13e) field of relocation entry 3 in section (__DWARFA,__debug_info) out of range
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/libtool: internal link edit command failed
...failed darwin.link.dll stage/lib/libboost_serialization-mt.dylib...
darwin.link.dll bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/libboost_serialization-mt.dylib

    "/usr/bin/g++-4.0" -dynamiclib -Wl,-single_module -install_name "/opt/local/lib/libboost_serialization-mt.dylib"  -o "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/libboost_serialization-mt.dylib" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_archive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_iserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_oserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_pointer_iserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_pointer_oserializer.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_serializer_map.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_text_iprimitive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_text_oprimitive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/basic_xml_archive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/binary_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/binary_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/extended_type_info.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/extended_type_info_typeid.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/extended_type_info_no_rtti.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/polymorphic_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/polymorphic_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/stl_port.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/text_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/text_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/void_cast.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/archive_exception.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_grammar.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_iarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_oarchive.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/xml_archive_exception.o" "bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/shared_ptr_helper.o"      -headerpad_max_install_names -Wl,-dead_strip -no_dead_strip_inits_and_terms 

ld: bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/stl_port.o r_address (0x23d13e) field of relocation entry 3 in section (__DWARFA,__debug_info) out of range
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/libtool: internal link edit command failed
...failed darwin.link.dll bin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi/libboost_serialization-mt.dylib...
...skipped <pstage/lib>libboost_wserialization-mt.dylib for lack of <pbin.v2/libs/serialization/build/darwin-4.0.1/release/threading-multi>libboost_serialization-mt.dylib...
darwin.link.dll stage/lib/libboost_regex-mt.dylib

    "/usr/bin/g++-4.0" -dynamiclib -Wl,-single_module -install_name "/opt/local/lib/libboost_regex-mt.dylib"  -o "stage/lib/libboost_regex-mt.dylib" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/c_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/cpp_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/cregex.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/fileiter.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/icu.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/instances.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/posix_api.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex_debug.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex_raw_buffer.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex_traits_defaults.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/static_mutex.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/w32_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/wc_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/wide_posix_api.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/winstances.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/usinstances.o"      -headerpad_max_install_names -Wl,-dead_strip -no_dead_strip_inits_and_terms 

ld: bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/icu.o r_address (0x2b233) field of relocation entry 5 in section (__DWARFA,__debug_info) out of range
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/libtool: internal link edit command failed
...failed darwin.link.dll stage/lib/libboost_regex-mt.dylib...
darwin.link.dll bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/libboost_regex-mt.dylib

    "/usr/bin/g++-4.0" -dynamiclib -Wl,-single_module -install_name "/opt/local/lib/libboost_regex-mt.dylib"  -o "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/libboost_regex-mt.dylib" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/c_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/cpp_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/cregex.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/fileiter.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/icu.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/instances.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/posix_api.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex_debug.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex_raw_buffer.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/regex_traits_defaults.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/static_mutex.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/w32_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/wc_regex_traits.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/wide_posix_api.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/winstances.o" "bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/usinstances.o"      -headerpad_max_install_names -Wl,-dead_strip -no_dead_strip_inits_and_terms 

ld: bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/icu.o r_address (0x2b233) field of relocation entry 5 in section (__DWARFA,__debug_info) out of range
/usr/libexec/gcc/i686-apple-darwin8/4.0.1/libtool: internal link edit command failed
...failed darwin.link.dll bin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi/libboost_regex-mt.dylib...
...skipped <pstage/lib>libboost_graph-mt.dylib for lack of <pbin.v2/libs/regex/build/darwin-4.0.1/release/threading-multi>libboost_regex-mt.dylib...
...failed updating 5 targets...
...skipped 2 targets...
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0" && bjam -j2 -d2 --layout=tagged --debug-configuration --ignore-site-config --user-config=user-config.jam --without-mpi -sBZIP2_INCLUDE=/opt/local/include -sBZIP2_LIBPATH=/opt/local/lib -sZLIB_INCLUDE=/opt/local/include -sZLIB_LIBPATH=/opt/local/lib " returned error 1
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_41_0" && bjam -j2 -d2 --layout=tagged --debug-configuration --ignore-site-config --user-config=user-config.jam --without-mpi -sBZIP2_INCLUDE=/opt/local/include -sBZIP2_LIBPATH=/opt/local/lib -sZLIB_INCLUDE=/opt/local/include -sZLIB_LIBPATH=/opt/local/lib " returned error 1
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for boost): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>