| 1 | [sanei_debug] Setting debug level of dll to 127. |
|---|
| 2 | [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22 |
|---|
| 3 | [dll] sane_init/read_dlld: attempting to open directory `./dll.d' |
|---|
| 4 | [dll] sane_init/read_dlld: attempting to open directory `/opt/local/etc/sane.d/dll.d' |
|---|
| 5 | [dll] sane_init/read_dlld: opendir failed: No such file or directory |
|---|
| 6 | [dll] sane_init/read_config: reading dll.conf |
|---|
| 7 | [dll] add_backend: adding backend `net' |
|---|
| 8 | [dll] add_backend: adding backend `abaton' |
|---|
| 9 | [dll] add_backend: adding backend `agfafocus' |
|---|
| 10 | [dll] add_backend: adding backend `apple' |
|---|
| 11 | [dll] add_backend: adding backend `avision' |
|---|
| 12 | [dll] add_backend: adding backend `artec' |
|---|
| 13 | [dll] add_backend: adding backend `artec_eplus48u' |
|---|
| 14 | [dll] add_backend: adding backend `as6e' |
|---|
| 15 | [dll] add_backend: adding backend `bh' |
|---|
| 16 | [dll] add_backend: adding backend `canon' |
|---|
| 17 | [dll] add_backend: adding backend `canon630u' |
|---|
| 18 | [dll] add_backend: adding backend `canon_dr' |
|---|
| 19 | [dll] add_backend: adding backend `cardscan' |
|---|
| 20 | [dll] add_backend: adding backend `coolscan' |
|---|
| 21 | [dll] add_backend: adding backend `coolscan3' |
|---|
| 22 | [dll] add_backend: adding backend `dell1600n_net' |
|---|
| 23 | [dll] add_backend: adding backend `dmc' |
|---|
| 24 | [dll] add_backend: adding backend `epjitsu' |
|---|
| 25 | [dll] add_backend: adding backend `epson2' |
|---|
| 26 | [dll] add_backend: adding backend `fujitsu' |
|---|
| 27 | [dll] add_backend: adding backend `genesys' |
|---|
| 28 | [dll] add_backend: adding backend `gt68xx' |
|---|
| 29 | [dll] add_backend: adding backend `hp' |
|---|
| 30 | [dll] add_backend: adding backend `hp3900' |
|---|
| 31 | [dll] add_backend: adding backend `hpsj5s' |
|---|
| 32 | [dll] add_backend: adding backend `hp3500' |
|---|
| 33 | [dll] add_backend: adding backend `hp4200' |
|---|
| 34 | [dll] add_backend: adding backend `hp5400' |
|---|
| 35 | [dll] add_backend: adding backend `hp5590' |
|---|
| 36 | [dll] add_backend: adding backend `hpljm1005' |
|---|
| 37 | [dll] add_backend: adding backend `hs2p' |
|---|
| 38 | [dll] add_backend: adding backend `ibm' |
|---|
| 39 | [dll] add_backend: adding backend `kodak' |
|---|
| 40 | [dll] add_backend: adding backend `kvs1025' |
|---|
| 41 | [dll] add_backend: adding backend `kvs20xx' |
|---|
| 42 | [dll] add_backend: adding backend `leo' |
|---|
| 43 | [dll] add_backend: adding backend `lexmark' |
|---|
| 44 | [dll] add_backend: adding backend `ma1509' |
|---|
| 45 | [dll] add_backend: adding backend `magicolor' |
|---|
| 46 | [dll] add_backend: adding backend `matsushita' |
|---|
| 47 | [dll] add_backend: adding backend `microtek' |
|---|
| 48 | [dll] add_backend: adding backend `microtek2' |
|---|
| 49 | [dll] add_backend: adding backend `mustek' |
|---|
| 50 | [dll] add_backend: adding backend `mustek_usb' |
|---|
| 51 | [dll] add_backend: adding backend `mustek_usb2' |
|---|
| 52 | [dll] add_backend: adding backend `nec' |
|---|
| 53 | [dll] add_backend: adding backend `niash' |
|---|
| 54 | [dll] add_backend: adding backend `pie' |
|---|
| 55 | [dll] add_backend: adding backend `pint' |
|---|
| 56 | [dll] add_backend: adding backend `pixma' |
|---|
| 57 | [dll] add_backend: adding backend `plustek' |
|---|
| 58 | [dll] add_backend: adding backend `qcam' |
|---|
| 59 | [dll] add_backend: adding backend `ricoh' |
|---|
| 60 | [dll] add_backend: adding backend `rts8891' |
|---|
| 61 | [dll] add_backend: adding backend `s9036' |
|---|
| 62 | [dll] add_backend: adding backend `sceptre' |
|---|
| 63 | [dll] add_backend: adding backend `sharp' |
|---|
| 64 | [dll] add_backend: adding backend `sm3600' |
|---|
| 65 | [dll] add_backend: adding backend `sm3840' |
|---|
| 66 | [dll] add_backend: adding backend `snapscan' |
|---|
| 67 | [dll] add_backend: adding backend `sp15c' |
|---|
| 68 | [dll] add_backend: adding backend `tamarack' |
|---|
| 69 | [dll] add_backend: adding backend `teco1' |
|---|
| 70 | [dll] add_backend: adding backend `teco2' |
|---|
| 71 | [dll] add_backend: adding backend `teco3' |
|---|
| 72 | [dll] add_backend: adding backend `u12' |
|---|
| 73 | [dll] add_backend: adding backend `umax' |
|---|
| 74 | [dll] add_backend: adding backend `umax1220u' |
|---|
| 75 | [dll] add_backend: adding backend `v4l' |
|---|
| 76 | [dll] add_backend: adding backend `xerox_mfp' |
|---|
| 77 | [dll] sane_open: trying to open `epson2:net:2.0.0.72' |
|---|
| 78 | [dll] load: searching backend `epson2' in `/opt/local/lib/sane' |
|---|
| 79 | [dll] load: trying to load `/opt/local/lib/sane/libsane-epson2.1.so' |
|---|
| 80 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-epson2.1.so' |
|---|
| 81 | [dll] init: initializing backend `epson2' |
|---|
| 82 | [dll] init: backend `epson2' is version 1.0.124 |
|---|
| 83 | [dll] sane_open: open successful |
|---|
| 84 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=0) |
|---|
| 85 | [dll] sane_control_option(handle=0x7f95d2900090,option=0,action=0,value=0x7fff555470fc,info=0x0) |
|---|
| 86 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=0) |
|---|
| 87 | [dll] sane_control_option(handle=0x7f95d2900090,option=0,action=0,value=0x7fff55547044,info=0x0) |
|---|
| 88 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=1) |
|---|
| 89 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=2) |
|---|
| 90 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=3) |
|---|
| 91 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=4) |
|---|
| 92 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=5) |
|---|
| 93 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=6) |
|---|
| 94 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=7) |
|---|
| 95 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=8) |
|---|
| 96 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=9) |
|---|
| 97 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=10) |
|---|
| 98 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=11) |
|---|
| 99 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=12) |
|---|
| 100 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=13) |
|---|
| 101 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=14) |
|---|
| 102 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=15) |
|---|
| 103 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=16) |
|---|
| 104 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=17) |
|---|
| 105 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=18) |
|---|
| 106 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=19) |
|---|
| 107 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=20) |
|---|
| 108 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=21) |
|---|
| 109 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=22) |
|---|
| 110 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=23) |
|---|
| 111 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=24) |
|---|
| 112 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=25) |
|---|
| 113 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=26) |
|---|
| 114 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=27) |
|---|
| 115 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=28) |
|---|
| 116 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=29) |
|---|
| 117 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=30) |
|---|
| 118 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=31) |
|---|
| 119 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=32) |
|---|
| 120 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=33) |
|---|
| 121 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=34) |
|---|
| 122 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=35) |
|---|
| 123 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=36) |
|---|
| 124 | [dll] sane_control_option(handle=0x7f95d2900090,option=27,action=0,value=0x10a6c3670,info=0x0) |
|---|
| 125 | [dll] sane_control_option(handle=0x7f95d2900090,option=25,action=0,value=0x7fff55547040,info=0x0) |
|---|
| 126 | [dll] sane_control_option(handle=0x7f95d2900090,option=28,action=0,value=0x10a6c3674,info=0x0) |
|---|
| 127 | [dll] sane_control_option(handle=0x7f95d2900090,option=26,action=0,value=0x7fff55547040,info=0x0) |
|---|
| 128 | [dll] sane_control_option(handle=0x7f95d2900090,option=25,action=0,value=0x7fff555470f0,info=0x0) |
|---|
| 129 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=27) |
|---|
| 130 | [dll] sane_control_option(handle=0x7f95d2900090,option=27,action=1,value=0x7fff555470ec,info=0x7fff55547044) |
|---|
| 131 | [dll] sane_control_option(handle=0x7f95d2900090,option=26,action=0,value=0x7fff555470f0,info=0x0) |
|---|
| 132 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=28) |
|---|
| 133 | [dll] sane_control_option(handle=0x7f95d2900090,option=28,action=1,value=0x7fff555470ec,info=0x7fff55547044) |
|---|
| 134 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=1) |
|---|
| 135 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=2) |
|---|
| 136 | [dll] sane_control_option(handle=0x7f95d2900090,option=2,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 137 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=3) |
|---|
| 138 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=4) |
|---|
| 139 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=5) |
|---|
| 140 | [dll] sane_control_option(handle=0x7f95d2900090,option=5,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 141 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=6) |
|---|
| 142 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=7) |
|---|
| 143 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=8) |
|---|
| 144 | [dll] sane_control_option(handle=0x7f95d2900090,option=8,action=0,value=0x7fff55546fd0,info=0x0) |
|---|
| 145 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=9) |
|---|
| 146 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=10) |
|---|
| 147 | [dll] sane_control_option(handle=0x7f95d2900090,option=10,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 148 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=11) |
|---|
| 149 | [dll] sane_control_option(handle=0x7f95d2900090,option=11,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 150 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=12) |
|---|
| 151 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=13) |
|---|
| 152 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=14) |
|---|
| 153 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=15) |
|---|
| 154 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=16) |
|---|
| 155 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=17) |
|---|
| 156 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=18) |
|---|
| 157 | [dll] sane_control_option(handle=0x7f95d2900090,option=18,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 158 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=19) |
|---|
| 159 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=20) |
|---|
| 160 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=21) |
|---|
| 161 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=22) |
|---|
| 162 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=23) |
|---|
| 163 | Usage: scanimage [OPTION]... |
|---|
| 164 | |
|---|
| 165 | Start image acquisition on a scanner device and write image data to |
|---|
| 166 | standard output. |
|---|
| 167 | |
|---|
| 168 | Parameters are separated by a blank from single-character options (e.g. |
|---|
| 169 | -d epson) and by a "=" from multi-character options (e.g. --device-name=epson). |
|---|
| 170 | -d, --device-name=DEVICE use a given scanner device (e.g. hp:/dev/scanner) |
|---|
| 171 | --format=pnm|tiff file format of output file |
|---|
| 172 | -i, --icc-profile=PROFILE include this ICC profile into TIFF file |
|---|
| 173 | -L, --list-devices show available scanner devices |
|---|
| 174 | -f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output |
|---|
| 175 | can be specified: %d (device name), %v (vendor), |
|---|
| 176 | %m (model), %t (type), %i (index number), and |
|---|
| 177 | %n (newline) |
|---|
| 178 | -b, --batch[=FORMAT] working in batch mode, FORMAT is `out%d.pnm' or |
|---|
| 179 | `out%d.tif' by default depending on --format |
|---|
| 180 | --batch-start=# page number to start naming files with |
|---|
| 181 | --batch-count=# how many pages to scan in batch mode |
|---|
| 182 | --batch-increment=# increase page number in filename by # |
|---|
| 183 | --batch-double increment page number by two, same as |
|---|
| 184 | --batch-increment=2 |
|---|
| 185 | --batch-prompt ask for pressing a key before scanning a page |
|---|
| 186 | --accept-md5-only only accept authorization requests using md5 |
|---|
| 187 | -p, --progress print progress messages |
|---|
| 188 | -n, --dont-scan only set options, don't actually scan |
|---|
| 189 | -T, --test test backend thoroughly |
|---|
| 190 | -A, --all-options list all available backend options |
|---|
| 191 | -h, --help display this help message and exit |
|---|
| 192 | -v, --verbose give even more status messages |
|---|
| 193 | -B, --buffer-size=# change input buffer size (in kB, default 32) |
|---|
| 194 | -V, --version print version information |
|---|
| 195 | |
|---|
| 196 | Options specific to device `epson2:net:2.0.0.72': |
|---|
| 197 | Scan Mode: |
|---|
| 198 | --mode Lineart|Gray|Color [Lineart] |
|---|
| 199 | Selects the scan mode (e.g., lineart, monochrome, or color). |
|---|
| 200 | --depth 8 [inactive] |
|---|
| 201 | Number of bits per sample, typical values are 1 for "line-art" and 8 |
|---|
| 202 | for multibit scans. |
|---|
| 203 | --halftoning None|Halftone A (Hard Tone)|Halftone B (Soft Tone)|Halftone C (Net Screen)|Dither A (4x4 Bayer)|Dither B (4x4 Spiral)|Dither C (4x4 Net Screen)|Dither D (8x4 Net Screen)|Text Enhanced Technology|Download pattern A|Download pattern B [inactive] |
|---|
| 204 | Selects the halftone. |
|---|
| 205 | --dropout None|Red|Green|Blue [None] |
|---|
| 206 | Selects the dropout. |
|---|
| 207 | --brightness 0..0 [inactive] |
|---|
| 208 | Selects the brightness. |
|---|
| 209 | --sharpness -2..2 [inactive] |
|---|
| 210 | |
|---|
| 211 | --gamma-correction User defined (Gamma=1.0)|User defined (Gamma=1.8) [User defined (Gamma=1.8)] |
|---|
| 212 | Selects the gamma correction value from a list of pre-defined devices |
|---|
| 213 | or the user defined table, which can be downloaded to the scanner |
|---|
| 214 | --color-correction None|Built in CCT profile|User defined CCT profile [inactive] |
|---|
| 215 | Sets the color correction table for the selected output device. |
|---|
| 216 | --resolution 75|100|150|300|600|1200dpi [75] |
|---|
| 217 | Sets the resolution of the scanned image. |
|---|
| 218 | --threshold 0..255 [128] |
|---|
| 219 | Select minimum-brightness to get a white point |
|---|
| 220 | Advanced: |
|---|
| 221 | --mirror[=(yes|no)] [inactive] |
|---|
| 222 | Mirror the image. |
|---|
| 223 | --auto-area-segmentation[=(yes|no)] [inactive] |
|---|
| 224 | Enables different dithering modes in image and text areas |
|---|
| 225 | --red-gamma-table 0..255,... |
|---|
| 226 | Gamma-correction table for the red band. |
|---|
| 227 | --green-gamma-table 0..255,... |
|---|
| 228 | Gamma-correction table for the green band. |
|---|
| 229 | --blue-gamma-table 0..255,... |
|---|
| 230 | Gamma-correction table for the blue band. |
|---|
| 231 | --wait-for-button[=(yes|no)] [no] |
|---|
| 232 | After sending the scan command, wait until the button on the scanner |
|---|
| 233 | is pressed to actually start the scan process. |
|---|
| 234 | Color correction: |
|---|
| 235 | --cct-type Automatic|Reflective|Colour negatives|Monochrome negatives|Colour positives [inactive] |
|---|
| 236 | Color correction profile type |
|---|
| 237 | --cct-profile -2..2,... |
|---|
| 238 | Color correction profile data |
|---|
| 239 | Preview: |
|---|
| 240 | --preview[=(yes[dll] sane_control_option(handle=0x7f95d2900090,option=23,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 241 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=24) |
|---|
| 242 | [dll] sane_control_option(handle=0x7f95d2900090,option=25,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 243 | [dll] sane_control_option(handle=0x7f95d2900090,option=26,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 244 | [dll] sane_control_option(handle=0x7f95d2900090,option=27,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 245 | [dll] sane_control_option(handle=0x7f95d2900090,option=28,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 246 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=29) |
|---|
| 247 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=30) |
|---|
| 248 | [dll] sane_control_option(handle=0x7f95d2900090,option=30,action=0,value=0x7fff55546fd0,info=0x0) |
|---|
| 249 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=31) |
|---|
| 250 | [dll] sane_control_option(handle=0x7f95d2900090,option=31,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 251 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=32) |
|---|
| 252 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=33) |
|---|
| 253 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=34) |
|---|
| 254 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=35) |
|---|
| 255 | [dll] sane_control_option(handle=0x7f95d2900090,option=35,action=0,value=0x7fff55546fe0,info=0x0) |
|---|
| 256 | [dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=36) |
|---|
| 257 | [dll] sane_get_devices |
|---|
| 258 | [dll] load: searching backend `xerox_mfp' in `/opt/local/lib/sane' |
|---|
| 259 | [dll] load: trying to load `/opt/local/lib/sane/libsane-xerox_mfp.1.so' |
|---|
| 260 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-xerox_mfp.1.so' |
|---|
| 261 | [dll] init: initializing backend `xerox_mfp' |
|---|
| 262 | [dll] init: backend `xerox_mfp' is version 1.0.12 |
|---|
| 263 | [dll] load: searching backend `v4l' in `/opt/local/lib/sane' |
|---|
| 264 | [dll] load: trying to load `/opt/local/lib/sane/libsane-v4l.1.so' |
|---|
| 265 | [dll] load: couldn't open `/opt/local/lib/sane/libsane-v4l.1.so' (No such file or directory) |
|---|
| 266 | [dll] load: couldn't find backend `v4l' (No such file or directory) |
|---|
| 267 | [dll] load: searching backend `umax1220u' in `/opt/local/lib/sane' |
|---|
| 268 | [dll] load: trying to load `/opt/local/lib/sane/libsane-umax1220u.1.so' |
|---|
| 269 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-umax1220u.1.so' |
|---|
| 270 | [dll] init: initializing backend `umax1220u' |
|---|
| 271 | [dll] init: backend `umax1220u' is version 1.0.2 |
|---|
| 272 | [dll] load: searching backend `umax' in `/opt/local/lib/sane' |
|---|
| 273 | [dll] load: trying to load `/opt/local/lib/sane/libsane-umax.1.so' |
|---|
| 274 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-umax.1.so' |
|---|
| 275 | [dll] init: initializing backend `umax' |
|---|
| 276 | [dll] init: backend `umax' is version 1.0.45 |
|---|
| 277 | [dll] load: searching backend `u12' in `/opt/local/lib/sane' |
|---|
| 278 | [dll] load: trying to load `/opt/local/lib/sane/libsane-u12.1.so' |
|---|
| 279 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-u12.1.so' |
|---|
| 280 | [dll] init: initializing backend `u12' |
|---|
| 281 | [dll] init: backend `u12' is version 1.0.0 |
|---|
| 282 | [dll] load: searching backend `teco3' in `/opt/local/lib/sane' |
|---|
| 283 | [dll] load: trying to load `/opt/local/lib/sane/libsane-teco3.1.so' |
|---|
| 284 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-teco3.1.so' |
|---|
| 285 | [dll] init: initializing backend `teco3' |
|---|
| 286 | [dll] init: backend `teco3' is version 1.0.1 |
|---|
| 287 | [dll] load: searching backend `teco2' in `/opt/local/lib/sane' |
|---|
| 288 | [dll] load: trying to load `/opt/local/lib/sane/libsane-teco2.1.so' |
|---|
| 289 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-teco2.1.so' |
|---|
| 290 | [dll] init: initializing backend `teco2' |
|---|
| 291 | [dll] init: backend `teco2' is version 1.0.10 |
|---|
| 292 | [dll] load: searching backend `teco1' in `/opt/local/lib/sane' |
|---|
| 293 | [dll] load: trying to load `/opt/local/lib/sane/libsane-teco1.1.so' |
|---|
| 294 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-teco1.1.so' |
|---|
| 295 | [dll] init: initializing backend `teco1' |
|---|
| 296 | [dll] init: backend `teco1' is version 1.0.10 |
|---|
| 297 | [dll] load: searching backend `tamarack' in `/opt/local/lib/sane' |
|---|
| 298 | [dll] load: trying to load `/opt/local/lib/sane/libsane-tamarack.1.so' |
|---|
| 299 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-tamarack.1.so' |
|---|
| 300 | [dll] init: initializing backend `tamarack' |
|---|
| 301 | [dll] init: backend `tamarack' is version 1.0.0 |
|---|
| 302 | [dll] load: searching backend `sp15c' in `/opt/local/lib/sane' |
|---|
| 303 | [dll] load: trying to load `/opt/local/lib/sane/libsane-sp15c.1.so' |
|---|
| 304 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sp15c.1.so' |
|---|
| 305 | [dll] init: initializing backend `sp15c' |
|---|
| 306 | [dll] init: backend `sp15c' is version 1.0.0 |
|---|
| 307 | [dll] load: searching backend `snapscan' in `/opt/local/lib/sane' |
|---|
| 308 | [dll] load: trying to load `/opt/local/lib/sane/libsane-snapscan.1.so' |
|---|
| 309 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-snapscan.1.so' |
|---|
| 310 | [dll] init: initializing backend `snapscan' |
|---|
| 311 | [dll] init: backend `snapscan' is version 1.4.53 |
|---|
| 312 | [dll] load: searching backend `sm3840' in `/opt/local/lib/sane' |
|---|
| 313 | [dll] load: trying to load `/opt/local/lib/sane/libsane-sm3840.1.so' |
|---|
| 314 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sm3840.1.so' |
|---|
| 315 | [dll] init: initializing backend `sm3840' |
|---|
| 316 | [dll] init: backend `sm3840' is version 1.0.0 |
|---|
| 317 | [dll] load: searching backend `sm3600' in `/opt/local/lib/sane' |
|---|
| 318 | [dll] load: trying to load `/opt/local/lib/sane/libsane-sm3600.1.so' |
|---|
| 319 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sm3600.1.so' |
|---|
| 320 | [dll] init: initializing backend `sm3600' |
|---|
| 321 | [dll] init: backend `sm3600' is version 1.0.6 |
|---|
| 322 | [dll] load: searching backend `sharp' in `/opt/local/lib/sane' |
|---|
| 323 | [dll] load: trying to load `/opt/local/lib/sane/libsane-sharp.1.so' |
|---|
| 324 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sharp.1.so' |
|---|
| 325 | [dll] init: initializing backend `sharp' |
|---|
| 326 | [dll] init: backend `sharp' is version 1.0.0 |
|---|
| 327 | [dll] load: searching backend `sceptre' in `/opt/local/lib/sane' |
|---|
| 328 | [dll] load: trying to load `/opt/local/lib/sane/libsane-sceptre.1.so' |
|---|
| 329 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sceptre.1.so' |
|---|
| 330 | [dll] init: initializing backend `sceptre' |
|---|
| 331 | [dll] init: backend `sceptre' is version 1.0.10 |
|---|
| 332 | [dll] load: searching backend `s9036' in `/opt/local/lib/sane' |
|---|
| 333 | [dll] load: trying to load `/opt/local/lib/sane/libsane-s9036.1.so' |
|---|
| 334 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-s9036.1.so' |
|---|
| 335 | [dll] init: initializing backend `s9036' |
|---|
| 336 | [dll] init: backend `s9036' is version 1.0.0 |
|---|
| 337 | [dll] load: searching backend `rts8891' in `/opt/local/lib/sane' |
|---|
| 338 | [dll] load: trying to load `/opt/local/lib/sane/libsane-rts8891.1.so' |
|---|
| 339 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-rts8891.1.so' |
|---|
| 340 | [dll] init: initializing backend `rts8891' |
|---|
| 341 | [dll] init: backend `rts8891' is version 1.0.31 |
|---|
| 342 | [dll] load: searching backend `ricoh' in `/opt/local/lib/sane' |
|---|
| 343 | [dll] load: trying to load `/opt/local/lib/sane/libsane-ricoh.1.so' |
|---|
| 344 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-ricoh.1.so' |
|---|
| 345 | [dll] init: initializing backend `ricoh' |
|---|
| 346 | [dll] init: backend `ricoh' is version 1.0.0 |
|---|
| 347 | [dll] load: searching backend `qcam' in `/opt/local/lib/sane' |
|---|
| 348 | [dll] load: trying to load `/opt/local/lib/sane/libsane-qcam.1.so' |
|---|
| 349 | [dll] load: couldn't open `/opt/local/lib/sane/libsane-qcam.1.so' (No such file or directory) |
|---|
| 350 | [dll] load: couldn't find backend `qcam' (No such file or directory) |
|---|
| 351 | [dll] load: searching backend `plustek' in `/opt/local/lib/sane' |
|---|
| 352 | [dll] load: trying to load `/opt/local/lib/sane/libsane-plustek.1.so' |
|---|
| 353 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-plustek.1.so' |
|---|
| 354 | [dll] init: initializing backend `plustek' |
|---|
| 355 | [dll] init: backend `plustek' is version 1.0.0 |
|---|
| 356 | [dll] load: searching backend `pixma' in `/opt/local/lib/sane' |
|---|
| 357 | [dll] load: trying to load `/opt/local/lib/sane/libsane-pixma.1.so' |
|---|
| 358 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-pixma.1.so' |
|---|
| 359 | [dll] init: initializing backend `pixma' |
|---|
| 360 | [dll] init: backend `pixma' is version 1.0.16 |
|---|
| 361 | [dll] load: searching backend `pint' in `/opt/local/lib/sane' |
|---|
| 362 | [dll] load: trying to load `/opt/local/lib/sane/libsane-pint.1.so' |
|---|
| 363 | [dll] load: couldn't open `/opt/local/lib/sane/libsane-pint.1.so' (No such file or directory) |
|---|
| 364 | [dll] load: couldn't find backend `pint' (No such file or directory) |
|---|
| 365 | [dll] load: searching backend `pie' in `/opt/local/lib/sane' |
|---|
| 366 | [dll] load: trying to load `/opt/local/lib/sane/libsane-pie.1.so' |
|---|
| 367 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-pie.1.so' |
|---|
| 368 | [dll] init: initializing backend `pie' |
|---|
| 369 | [dll] init: backend `pie' is version 1.0.9 |
|---|
| 370 | [dll] load: searching backend `niash' in `/opt/local/lib/sane' |
|---|
| 371 | [dll] load: trying to load `/opt/local/lib/sane/libsane-niash.1.so' |
|---|
| 372 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-niash.1.so' |
|---|
| 373 | [dll] init: initializing backend `niash' |
|---|
| 374 | [dll] init: backend `niash' is version 1.0.1 |
|---|
| 375 | [dll] load: searching backend `nec' in `/opt/local/lib/sane' |
|---|
| 376 | [dll] load: trying to load `/opt/local/lib/sane/libsane-nec.1.so' |
|---|
| 377 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-nec.1.so' |
|---|
| 378 | [dll] init: initializing backend `nec' |
|---|
| 379 | [dll] init: backend `nec' is version 1.0.0 |
|---|
| 380 | [dll] load: searching backend `mustek_usb2' in `/opt/local/lib/sane' |
|---|
| 381 | [dll] load: trying to load `/opt/local/lib/sane/libsane-mustek_usb2.1.so' |
|---|
| 382 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-mustek_usb2.1.so' |
|---|
| 383 | [dll] init: initializing backend `mustek_usb2' |
|---|
| 384 | [dll] init: backend `mustek_usb2' is version 1.0.10 |
|---|
| 385 | [dll] load: searching backend `mustek_usb' in `/opt/local/lib/sane' |
|---|
| 386 | [dll] load: trying to load `/opt/local/lib/sane/libsane-mustek_usb.1.so' |
|---|
| 387 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-mustek_usb.1.so' |
|---|
| 388 | [dll] init: initializing backend `mustek_usb' |
|---|
| 389 | [dll] init: backend `mustek_usb' is version 1.0.18 |
|---|
| 390 | [dll] load: searching backend `mustek' in `/opt/local/lib/sane' |
|---|
| 391 | [dll] load: trying to load `/opt/local/lib/sane/libsane-mustek.1.so' |
|---|
| 392 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-mustek.1.so' |
|---|
| 393 | [dll] init: initializing backend `mustek' |
|---|
| 394 | [dll] init: backend `mustek' is version 1.0.138 |
|---|
| 395 | [dll] load: searching backend `microtek2' in `/opt/local/lib/sane' |
|---|
| 396 | [dll] load: trying to load `/opt/local/lib/sane/libsane-microtek2.1.so' |
|---|
| 397 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-microtek2.1.so' |
|---|
| 398 | [dll] init: initializing backend `microtek2' |
|---|
| 399 | [dll] init: backend `microtek2' is version 1.0.0 |
|---|
| 400 | [dll] load: searching backend `microtek' in `/opt/local/lib/sane' |
|---|
| 401 | [dll] load: trying to load `/opt/local/lib/sane/libsane-microtek.1.so' |
|---|
| 402 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-microtek.1.so' |
|---|
| 403 | [dll] init: initializing backend `microtek' |
|---|
| 404 | [dll] init: backend `microtek' is version 1.0.0 |
|---|
| 405 | [dll] load: searching backend `matsushita' in `/opt/local/lib/sane' |
|---|
| 406 | [dll] load: trying to load `/opt/local/lib/sane/libsane-matsushita.1.so' |
|---|
| 407 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-matsushita.1.so' |
|---|
| 408 | [dll] init: initializing backend `matsushita' |
|---|
| 409 | [dll] init: backend `matsushita' is version 1.0.7 |
|---|
| 410 | [dll] load: searching backend `magicolor' in `/opt/local/lib/sane' |
|---|
| 411 | [dll] load: trying to load `/opt/local/lib/sane/libsane-magicolor.1.so' |
|---|
| 412 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-magicolor.1.so' |
|---|
| 413 | [dll] init: initializing backend `magicolor' |
|---|
| 414 | [dll] init: backend `magicolor' is version 1.0.1 |
|---|
| 415 | [dll] load: searching backend `ma1509' in `/opt/local/lib/sane' |
|---|
| 416 | [dll] load: trying to load `/opt/local/lib/sane/libsane-ma1509.1.so' |
|---|
| 417 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-ma1509.1.so' |
|---|
| 418 | [dll] init: initializing backend `ma1509' |
|---|
| 419 | [dll] init: backend `ma1509' is version 1.0.3 |
|---|
| 420 | [dll] load: searching backend `lexmark' in `/opt/local/lib/sane' |
|---|
| 421 | [dll] load: trying to load `/opt/local/lib/sane/libsane-lexmark.1.so' |
|---|
| 422 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-lexmark.1.so' |
|---|
| 423 | [dll] init: initializing backend `lexmark' |
|---|
| 424 | [dll] init: backend `lexmark' is version 1.0.30 |
|---|
| 425 | [dll] load: searching backend `leo' in `/opt/local/lib/sane' |
|---|
| 426 | [dll] load: trying to load `/opt/local/lib/sane/libsane-leo.1.so' |
|---|
| 427 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-leo.1.so' |
|---|
| 428 | [dll] init: initializing backend `leo' |
|---|
| 429 | [dll] init: backend `leo' is version 1.0.11 |
|---|
| 430 | [dll] load: searching backend `kvs20xx' in `/opt/local/lib/sane' |
|---|
| 431 | [dll] load: trying to load `/opt/local/lib/sane/libsane-kvs20xx.1.so' |
|---|
| 432 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-kvs20xx.1.so' |
|---|
| 433 | [dll] init: initializing backend `kvs20xx' |
|---|
| 434 | [dll] init: backend `kvs20xx' is version 1.0.2 |
|---|
| 435 | [dll] load: searching backend `kvs1025' in `/opt/local/lib/sane' |
|---|
| 436 | [dll] load: trying to load `/opt/local/lib/sane/libsane-kvs1025.1.so' |
|---|
| 437 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-kvs1025.1.so' |
|---|
| 438 | [dll] init: initializing backend `kvs1025' |
|---|
| 439 | [dll] init: backend `kvs1025' is version 1.0.3 |
|---|
| 440 | [dll] load: searching backend `kodak' in `/opt/local/lib/sane' |
|---|
| 441 | [dll] load: trying to load `/opt/local/lib/sane/libsane-kodak.1.so' |
|---|
| 442 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-kodak.1.so' |
|---|
| 443 | [dll] init: initializing backend `kodak' |
|---|
| 444 | [dll] init: backend `kodak' is version 1.0.7 |
|---|
| 445 | [dll] load: searching backend `ibm' in `/opt/local/lib/sane' |
|---|
| 446 | [dll] load: trying to load `/opt/local/lib/sane/libsane-ibm.1.so' |
|---|
| 447 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-ibm.1.so' |
|---|
| 448 | [dll] init: initializing backend `ibm' |
|---|
| 449 | [dll] init: backend `ibm' is version 1.0.0 |
|---|
| 450 | [dll] load: searching backend `hs2p' in `/opt/local/lib/sane' |
|---|
| 451 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hs2p.1.so' |
|---|
| 452 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hs2p.1.so' |
|---|
| 453 | [dll] init: initializing backend `hs2p' |
|---|
| 454 | [dll] init: backend `hs2p' is version 1.0.0 |
|---|
| 455 | [dll] load: searching backend `hpljm1005' in `/opt/local/lib/sane' |
|---|
| 456 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hpljm1005.1.so' |
|---|
| 457 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hpljm1005.1.so' |
|---|
| 458 | [dll] init: initializing backend `hpljm1005' |
|---|
| 459 | [dll] init: backend `hpljm1005' is version 1.0.1 |
|---|
| 460 | [dll] load: searching backend `hp5590' in `/opt/local/lib/sane' |
|---|
| 461 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hp5590.1.so' |
|---|
| 462 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp5590.1.so' |
|---|
| 463 | [dll] init: initializing backend `hp5590' |
|---|
| 464 | [dll] init: backend `hp5590' is version 1.0.5 |
|---|
| 465 | [dll] load: searching backend `hp5400' in `/opt/local/lib/sane' |
|---|
| 466 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hp5400.1.so' |
|---|
| 467 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp5400.1.so' |
|---|
| 468 | [dll] init: initializing backend `hp5400' |
|---|
| 469 | [dll] init: backend `hp5400' is version 1.0.3 |
|---|
| 470 | [dll] load: searching backend `hp4200' in `/opt/local/lib/sane' |
|---|
| 471 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hp4200.1.so' |
|---|
| 472 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp4200.1.so' |
|---|
| 473 | [dll] init: initializing backend `hp4200' |
|---|
| 474 | [dll] init: backend `hp4200' is version 1.0.0 |
|---|
| 475 | [dll] load: searching backend `hp3500' in `/opt/local/lib/sane' |
|---|
| 476 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hp3500.1.so' |
|---|
| 477 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp3500.1.so' |
|---|
| 478 | [dll] init: initializing backend `hp3500' |
|---|
| 479 | [dll] init: backend `hp3500' is version 1.0.0 |
|---|
| 480 | [dll] load: searching backend `hpsj5s' in `/opt/local/lib/sane' |
|---|
| 481 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hpsj5s.1.so' |
|---|
| 482 | [dll] load: couldn't open `/opt/local/lib/sane/libsane-hpsj5s.1.so' (No such file or directory) |
|---|
| 483 | [dll] load: couldn't find backend `hpsj5s' (No such file or directory) |
|---|
| 484 | [dll] load: searching backend `hp3900' in `/opt/local/lib/sane' |
|---|
| 485 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hp3900.1.so' |
|---|
| 486 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp3900.1.so' |
|---|
| 487 | [dll] init: initializing backend `hp3900' |
|---|
| 488 | [dll] init: backend `hp3900' is version 1.0.0 |
|---|
| 489 | [dll] load: searching backend `hp' in `/opt/local/lib/sane' |
|---|
| 490 | [dll] load: trying to load `/opt/local/lib/sane/libsane-hp.1.so' |
|---|
| 491 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp.1.so' |
|---|
| 492 | [dll] init: initializing backend `hp' |
|---|
| 493 | [dll] init: backend `hp' is version 1.0.8 |
|---|
| 494 | [dll] load: searching backend `gt68xx' in `/opt/local/lib/sane' |
|---|
| 495 | [dll] load: trying to load `/opt/local/lib/sane/libsane-gt68xx.1.so' |
|---|
| 496 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-gt68xx.1.so' |
|---|
| 497 | [dll] init: initializing backend `gt68xx' |
|---|
| 498 | [dll] init: backend `gt68xx' is version 1.0.84 |
|---|
| 499 | [dll] load: searching backend `genesys' in `/opt/local/lib/sane' |
|---|
| 500 | [dll] load: trying to load `/opt/local/lib/sane/libsane-genesys.1.so' |
|---|
| 501 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-genesys.1.so' |
|---|
| 502 | [dll] init: initializing backend `genesys' |
|---|
| 503 | [dll] init: backend `genesys' is version 1.0.63 |
|---|
| 504 | [dll] load: searching backend `fujitsu' in `/opt/local/lib/sane' |
|---|
| 505 | [dll] load: trying to load `/opt/local/lib/sane/libsane-fujitsu.1.so' |
|---|
| 506 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-fujitsu.1.so' |
|---|
| 507 | [dll] init: initializing backend `fujitsu' |
|---|
| 508 | [dll] init: backend `fujitsu' is version 1.0.106 |
|---|
| 509 | [dll] load: searching backend `epjitsu' in `/opt/local/lib/sane' |
|---|
| 510 | [dll] load: trying to load `/opt/local/lib/sane/libsane-epjitsu.1.so' |
|---|
| 511 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-epjitsu.1.so' |
|---|
| 512 | [dll] init: initializing backend `epjitsu' |
|---|
| 513 | [dll] init: backend `epjitsu' is version 1.0.20 |
|---|
| 514 | [dll] load: searching backend `dmc' in `/opt/local/lib/sane' |
|---|
| 515 | [dll] load: trying to load `/opt/local/lib/sane/libsane-dmc.1.so' |
|---|
| 516 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-dmc.1.so' |
|---|
| 517 | [dll] init: initializing backend `dmc' |
|---|
| 518 | [dll] init: backend `dmc' is version 1.0.0 |
|---|
| 519 | [dll] load: searching backend `dell1600n_net' in `/opt/local/lib/sane' |
|---|
| 520 | [dll] load: trying to load `/opt/local/lib/sane/libsane-dell1600n_net.1.so' |
|---|
| 521 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-dell1600n_net.1.so' |
|---|
| 522 | [dll] init: initializing backend `dell1600n_net' |
|---|
| 523 | [dll] init: backend `dell1600n_net' is version 1.0.0 |
|---|
| 524 | [dll] load: searching backend `coolscan3' in `/opt/local/lib/sane' |
|---|
| 525 | [dll] load: trying to load `/opt/local/lib/sane/libsane-coolscan3.1.so' |
|---|
| 526 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-coolscan3.1.so' |
|---|
| 527 | [dll] init: initializing backend `coolscan3' |
|---|
| 528 | [dll] init: backend `coolscan3' is version 1.0.0 |
|---|
| 529 | [dll] load: searching backend `coolscan' in `/opt/local/lib/sane' |
|---|
| 530 | [dll] load: trying to load `/opt/local/lib/sane/libsane-coolscan.1.so' |
|---|
| 531 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-coolscan.1.so' |
|---|
| 532 | [dll] init: initializing backend `coolscan' |
|---|
| 533 | [dll] init: backend `coolscan' is version 1.0.0 |
|---|
| 534 | [dll] load: searching backend `cardscan' in `/opt/local/lib/sane' |
|---|
| 535 | [dll] load: trying to load `/opt/local/lib/sane/libsane-cardscan.1.so' |
|---|
| 536 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-cardscan.1.so' |
|---|
| 537 | [dll] init: initializing backend `cardscan' |
|---|
| 538 | [dll] init: backend `cardscan' is version 1.0.2 |
|---|
| 539 | [dll] load: searching backend `canon_dr' in `/opt/local/lib/sane' |
|---|
| 540 | [dll] load: trying to load `/opt/local/lib/sane/libsane-canon_dr.1.so' |
|---|
| 541 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-canon_dr.1.so' |
|---|
| 542 | [dll] init: initializing backend `canon_dr' |
|---|
| 543 | [dll] init: backend `canon_dr' is version 1.0.37 |
|---|
| 544 | [dll] load: searching backend `canon630u' in `/opt/local/lib/sane' |
|---|
| 545 | [dll] load: trying to load `/opt/local/lib/sane/libsane-canon630u.1.so' |
|---|
| 546 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-canon630u.1.so' |
|---|
| 547 | [dll] init: initializing backend `canon630u' |
|---|
| 548 | [dll] init: backend `canon630u' is version 1.0.1 |
|---|
| 549 | [dll] load: searching backend `canon' in `/opt/local/lib/sane' |
|---|
| 550 | [dll] load: trying to load `/opt/local/lib/sane/libsane-canon.1.so' |
|---|
| 551 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-canon.1.so' |
|---|
| 552 | [dll] init: initializing backend `canon' |
|---|
| 553 | [dll] init: backend `canon' is version 1.0.0 |
|---|
| 554 | [dll] load: searching backend `bh' in `/opt/local/lib/sane' |
|---|
| 555 | [dll] load: trying to load `/opt/local/lib/sane/libsane-bh.1.so' |
|---|
| 556 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-bh.1.so' |
|---|
| 557 | [dll] init: initializing backend `bh' |
|---|
| 558 | [dll] init: backend `bh' is version 1.0.4 |
|---|
| 559 | [dll] load: searching backend `as6e' in `/opt/local/lib/sane' |
|---|
| 560 | [dll] load: trying to load `/opt/local/lib/sane/libsane-as6e.1.so' |
|---|
| 561 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-as6e.1.so' |
|---|
| 562 | [dll] init: initializing backend `as6e' |
|---|
| 563 | [dll] load: searching backend `artec_eplus48u' in `/opt/local/lib/sane' |
|---|
| 564 | [dll] load: trying to load `/opt/local/lib/sane/libsane-artec_eplus48u.1.so' |
|---|
| 565 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-artec_eplus48u.1.so' |
|---|
| 566 | [dll] init: initializing backend `artec_eplus48u' |
|---|
| 567 | [dll] init: backend `artec_eplus48u' is version 1.0.0 |
|---|
| 568 | [dll] load: searching backend `artec' in `/opt/local/lib/sane' |
|---|
| 569 | [dll] load: trying to load `/opt/local/lib/sane/libsane-artec.1.so' |
|---|
| 570 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-artec.1.so' |
|---|
| 571 | [dll] init: initializing backend `artec' |
|---|
| 572 | [dll] init: backend `artec' is version 1.0.0 |
|---|
| 573 | [dll] load: searching backend `avision' in `/opt/local/lib/sane' |
|---|
| 574 | [dll] load: trying to load `/opt/local/lib/sane/libsane-avision.1.so' |
|---|
| 575 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-avision.1.so' |
|---|
| 576 | [dll] init: initializing backend `avision' |
|---|
| 577 | [dll] init: backend `avision' is version 1.0.294 |
|---|
| 578 | [dll] load: searching backend `apple' in `/opt/local/lib/sane' |
|---|
| 579 | [dll] load: trying to load `/opt/local/lib/sane/libsane-apple.1.so' |
|---|
| 580 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-apple.1.so' |
|---|
| 581 | [dll] init: initializing backend `apple' |
|---|
| 582 | [dll] init: backend `apple' is version 1.0.0 |
|---|
| 583 | [dll] load: searching backend `agfafocus' in `/opt/local/lib/sane' |
|---|
| 584 | [dll] load: trying to load `/opt/local/lib/sane/libsane-agfafocus.1.so' |
|---|
| 585 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-agfafocus.1.so' |
|---|
| 586 | [dll] init: initializing backend `agfafocus' |
|---|
| 587 | [dll] init: backend `agfafocus' is version 1.0.0 |
|---|
| 588 | [dll] load: searching backend `abaton' in `/opt/local/lib/sane' |
|---|
| 589 | [dll] load: trying to load `/opt/local/lib/sane/libsane-abaton.1.so' |
|---|
| 590 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-abaton.1.so' |
|---|
| 591 | [dll] init: initializing backend `abaton' |
|---|
| 592 | [dll] init: backend `abaton' is version 1.0.0 |
|---|
| 593 | [dll] load: searching backend `net' in `/opt/local/lib/sane' |
|---|
| 594 | [dll] load: trying to load `/opt/local/lib/sane/libsane-net.1.so' |
|---|
| 595 | [dll] load: dlopen()ing `/opt/local/lib/sane/libsane-net.1.so' |
|---|
| 596 | [dll] init: initializing backend `net' |
|---|
| 597 | [dll] init: backend `net' is version 1.0.22 |
|---|
| 598 | [dll] sane_get_devices: found 0 devices |
|---|
| 599 | [dll] sane_close(handle=0x7f95d2900090) |
|---|
| 600 | [dll] sane_exit: exiting |
|---|
| 601 | [dll] sane_exit: calling backend `xerox_mfp's exit function |
|---|
| 602 | [dll] sane_exit: calling backend `umax1220u's exit function |
|---|
| 603 | [dll] sane_exit: calling backend `umax's exit function |
|---|
| 604 | [dll] sane_exit: calling backend `u12's exit function |
|---|
| 605 | [dll] sane_exit: calling backend `teco3's exit function |
|---|
| 606 | [dll] sane_exit: calling backend `teco2's exit function |
|---|
| 607 | [dll] sane_exit: calling backend `teco1's exit function |
|---|
| 608 | [dll] sane_exit: calling backend `tamarack's exit function |
|---|
| 609 | [dll] sane_exit: calling backend `sp15c's exit function |
|---|
| 610 | [dll] sane_exit: calling backend `snapscan's exit function |
|---|
| 611 | [dll] sane_exit: calling backend `sm3840's exit function |
|---|
| 612 | [dll] sane_exit: calling backend `sm3600's exit function |
|---|
| 613 | [dll] sane_exit: calling backend `sharp's exit function |
|---|
| 614 | [dll] sane_exit: calling backend `sceptre's exit function |
|---|
| 615 | [dll] sane_exit: calling backend `s9036's exit function |
|---|
| 616 | [dll] sane_exit: calling backend `rts8891's exit function |
|---|
| 617 | [dll] sane_exit: calling backend `ricoh's exit function |
|---|
| 618 | [dll] sane_exit: calling backend `plustek's exit function |
|---|
| 619 | [dll] sane_exit: calling backend `pixma's exit function |
|---|
