llvm-3.0: build fails with ld64 errors

[ryandesign@…]

llvm-3.0 build fails on Tiger PowerPC. I installed ld64 as advised in #33987 but now get:

   -lLLVMARMAsmParser -lLLVMARMAsmPrinter -lLLVMARMCodeGen -lLLVMARMDesc -lLLVMARMDisassembler -lLLVMARMInfo -lLLVMAlphaCodeGen -lLLVMAlphaDesc -lLLVMAlphaInfo -lLLVMAnalysis -lLLVMArchive -lLLVMAsmParser -lLLVMAsmPrinter -lLLVMBitReader -lLLVMBitWriter -lLLVMBlackfinCodeGen -lLLVMBlackfinDesc -lLLVMBlackfinInfo -lLLVMCBackend -lLLVMCBackendInfo -lLLVMCellSPUCodeGen -lLLVMCellSPUDesc -lLLVMCellSPUInfo -lLLVMCodeGen -lLLVMCore -lLLVMCppBackend -lLLVMCppBackendInfo -lLLVMDebugInfo -lLLVMExecutionEngine -lLLVMInstCombine -lLLVMInstrumentation -lLLVMInterpreter -lLLVMJIT -lLLVMLinker -lLLVMMBlazeAsmParser -lLLVMMBlazeAsmPrinter -lLLVMMBlazeCodeGen -lLLVMMBlazeDesc -lLLVMMBlazeDisassembler -lLLVMMBlazeInfo -lLLVMMC -lLLVMMCDisassembler -lLLVMMCJIT -lLLVMMCParser -lLLVMMSP430AsmPrinter -lLLVMMSP430CodeGen -lLLVMMSP430Desc -lLLVMMSP430Info -lLLVMMipsAsmPrinter -lLLVMMipsCodeGen -lLLVMMipsDesc -lLLVMMipsInfo -lLLVMObject -lLLVMPTXAsmPrinter -lLLVMPTXCodeGen -lLLVMPTXDesc -lLLVMPTXInfo -lLLVMPowerPCAsmPrinter -lLLVMPowerPCCodeGen -lLLVMPowerPCDesc -lLLVMPowerPCInfo -lLLVMRuntimeDyld -lLLVMScalarOpts -lLLVMSelectionDAG -lLLVMSparcCodeGen -lLLVMSparcDesc -lLLVMSparcInfo -lLLVMSupport -lLLVMSystemZCodeGen -lLLVMSystemZDesc -lLLVMSystemZInfo -lLLVMTarget -lLLVMTransformUtils -lLLVMX86AsmParser -lLLVMX86AsmPrinter -lLLVMX86CodeGen -lLLVMX86Desc -lLLVMX86Disassembler -lLLVMX86Info -lLLVMX86Utils -lLLVMXCoreCodeGen -lLLVMXCoreDesc -lLLVMXCoreInfo -lLLVMipa -lLLVMipo -all_load -Wl,-dead_strip -Wl,-seg1addr -Wl,0xE0000000  -Wl,-install_name -Wl,"@executable_path/../lib/libLLVM-3.0.dylib" -lpthread -lffi -lm 
ld64: can't add line info to anonymous symbol cstring=LowerGlobalAddress: Relocation model other than staticnot supported. from /mp/var/macports/build/_Volumes_data_macports_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVMCellSPUCodeGen.a(SPUISelLowering.o)
ld64: can't add line info to anonymous symbol cstring=Recycler element size:  from /mp/var/macports/build/_Volumes_data_macports_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVMSupport.a(Allocator.o)
ld64-62.1 failed: bl out of range (-17780084 max is +/-16M) from __static_initialization_and_destruction_0(int, int)in /mp/var/macports/build/_Volumes_data_macports_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVMARMCodeGen.a(ARMBaseInstrInfo.o) to ___cxa_atexit in /mp/lib/apple-gcc42/gcc/powerpc-apple-darwin8/4.2.1/crt3.o in __static_initialization_and_destruction_0(int, int)from /mp/var/macports/build/_Volumes_data_macports_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVMARMCodeGen.a(ARMBaseInstrInfo.o)
collect2: ld returned 1 exit status

[jeremyhu@…]

sigh...

[jeremyhu@…]

Let's consolidate this into #33987

[Peter_Dyballa@…]

I have a similar failure, but without ld64, although available (main.log also available):

   -lLLVMARMAsmParser -lLLVMARMAsmPrinter -lLLVMARMCodeGen -lLLVMARMDesc -lLLVMARMDisassembler -lLLVMARMInfo -lLLVMAlphaCodeGen -lLLVMAlphaDesc -lLLVMAlphaInfo -lLLVMAnalysis -lLLVMArchive -lLLVMAsmParser -lLLVMAsmPrinter -lLLVMBitReader -lLLVMBitWriter -lLLVMBlackfinCodeGen -lLLVMBlackfinDesc -lLLVMBlackfinInfo -lLLVMCBackend -lLLVMCBackendInfo -lLLVMCellSPUCodeGen -lLLVMCellSPUDesc -lLLVMCellSPUInfo -lLLVMCodeGen -lLLVMCore -lLLVMCppBackend -lLLVMCppBackendInfo -lLLVMDebugInfo -lLLVMExecutionEngine -lLLVMInstCombine -lLLVMInstrumentation -lLLVMInterpreter -lLLVMJIT -lLLVMLinker -lLLVMMBlazeAsmParser -lLLVMMBlazeAsmPrinter -lLLVMMBlazeCodeGen -lLLVMMBlazeDesc -lLLVMMBlazeDisassembler -lLLVMMBlazeInfo -lLLVMMC -lLLVMMCDisassembler -lLLVMMCJIT -lLLVMMCParser -lLLVMMSP430AsmPrinter -lLLVMMSP430CodeGen -lLLVMMSP430Desc -lLLVMMSP430Info -lLLVMMipsAsmPrinter -lLLVMMipsCodeGen -lLLVMMipsDesc -lLLVMMipsInfo -lLLVMObject -lLLVMPTXAsmPrinter -lLLVMPTXCodeGen -lLLVMPTXDesc -lLLVMPTXInfo -lLLVMPowerPCAsmPrinter -lLLVMPowerPCCodeGen -lLLVMPowerPCDesc -lLLVMPowerPCInfo -lLLVMRuntimeDyld -lLLVMScalarOpts -lLLVMSelectionDAG -lLLVMSparcCodeGen -lLLVMSparcDesc -lLLVMSparcInfo -lLLVMSupport -lLLVMSystemZCodeGen -lLLVMSystemZDesc -lLLVMSystemZInfo -lLLVMTarget -lLLVMTransformUtils -lLLVMX86AsmParser -lLLVMX86AsmPrinter -lLLVMX86CodeGen -lLLVMX86Desc -lLLVMX86Disassembler -lLLVMX86Info -lLLVMX86Utils -lLLVMXCoreCodeGen -lLLVMXCoreDesc -lLLVMXCoreInfo -lLLVMipa -lLLVMipo -all_load -Wl,-dead_strip -Wl,-seg1addr -Wl,0xE0000000  -Wl,-dylib_install_name -Wl,"@executable_path/../lib/libLLVM-3.0.dylib" -lpthread -lffi -lm 
ld: bl out of range (-16777260 max is +/-16M) from __static_initialization_and_destruction_0(int, int)at 0xE10017D0 in __StaticInit of /opt/local/var/macports/build/_opt_local_var_macports_sources_lil.fr.rsync.macports.org_release_tarballs_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVMX86CodeGen.a(X86InstrInfo.o) to ___cxa_atexit at 0xE00018F0 in __text of  /opt/local/lib/apple-gcc42/gcc/powerpc-apple-darwin8/4.2.1/crt3.o in __static_initialization_and_destruction_0(int, int)from /opt/local/var/macports/build/_opt_local_var_macports_sources_lil.fr.rsync.macports.org_release_tarballs_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVMX86CodeGen.a(X86InstrInfo.o)
collect2: ld returned 1 exit status
make[1]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_lil.fr.rsync.macports.org_release_tarballs_ports_lang_llvm-3.0/llvm-3.0/work/llvm-3.0.src/Release+Debug/lib/libLLVM-3.0.dylib] Error 1

[jeremyhu@…]

Yes, please try what I suggested in #33987

[fang@…]

Cc Me!