Changes between Initial Version and Version 2 of Ticket #35734


Ignore:
Timestamp:
Aug 18, 2012, 10:51:49 PM (12 years ago)
Author:
ryandesign (Ryan Carsten Schmidt)
Comment:

Remember to use WikiFormatting when writing in Trac.

Since this was not a clean build, please "sudo port clean midori", then try again, and attach the new main.log if it fails again.

Legend:

Unmodified
Added
Removed
Modified

  • Ticket #35734

    • Property Owner changed from macports-tickets@… to afb@…
    • Property Summary changed from installing xfce failed due to failure to build midori to midori: Undefined symbols: _webkit_web_view_get_selected_text

  • Ticket #35734 – Description

    initial v2  
    1 "org.macports.build for port midori returned: command execution failed"
    2 below is the content of the log file for attempting to install midori alone.
    3 My goal is to install the xfce port, midori is just the obstacle along the way
    4 I'm open to suggestion on getting midori to build, or a work-a-round resulting in successful port installation of xfce minus midori.
    5 Thanks!
    6 system:
    7 ibook g3 900mhz 640mb ram
    8 OS X 10.4.11
    9 xcode 2.5
     1"org.macports.build for port midori returned: command execution failed" [[br]]
     2below is the content of the log file for attempting to install midori alone. [[br]]
     3My goal is to install the xfce port, midori is just the obstacle along the way [[br]]
     4I'm open to suggestion on getting midori to build, or a work-a-round resulting in successful port installation of xfce minus midori. [[br]]
     5Thanks! [[br]]
     6system: [[br]]
     7ibook g3 900mhz 640mb ram [[br]]
     8OS X 10.4.11 [[br]]
     9xcode 2.5 [[br]]
    1010macports built from source a couple days ago
    1111
    12 
    13 version:1
    14 :debug:main epoch: in tree: 0 installed: 0
    15 :debug:main gtk2 2.24.11_0 exists in the ports tree
    16 :debug:main gtk2 2.24.11_0 +x11 is the latest installed
    17 :debug:main gtk2 2.24.11_0 +x11 is active
    18 :debug:main Merging existing variants '+x11' into variants
    19 :debug:main new fully merged portvariants: x11 +
    20 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
    21 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    22 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    23 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    24 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    25 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    26 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
    27 :debug:main universal variant already exists, so not adding the default one
    28 :debug:main Executing variant x11 provides x11
    29 :debug:main No need to upgrade! gtk2 2.24.11_0 >= gtk2 2.24.11_0
    30 :debug:main epoch: in tree: 2 installed: 2
    31 :debug:main atk 2.2.0_2 exists in the ports tree
    32 :debug:main atk 2.2.0_2  is the latest installed
    33 :debug:main atk 2.2.0_2  is active
    34 :debug:main Merging existing variants '' into variants
    35 :debug:main new fully merged portvariants:
    36 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
    37 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    38 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    39 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    40 :debug:main adding the default universal variant
    41 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    42 :debug:main No need to upgrade! atk 2.2.0_2 >= atk 2.2.0_2
    43 :debug:main epoch: in tree: 0 installed: 0
    44 :debug:main glib2 2.32.4_0 exists in the ports tree
    45 :debug:main glib2 2.32.4_0  is the latest installed
    46 :debug:main glib2 2.32.4_0  is active
    47 :debug:main Merging existing variants '' into variants
    48 :debug:main new fully merged portvariants:
    49 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
    50 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    51 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    52 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    53 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    54 :debug:main adding the default universal variant
    55 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    56 :debug:main No need to upgrade! glib2 2.32.4_0 >= glib2 2.32.4_0
    57 :debug:main epoch: in tree: 0 installed: 0
    58 :debug:main gettext 0.18.1.1_2 exists in the ports tree
    59 :debug:main gettext 0.18.1.1_2  is the latest installed
    60 :debug:main gettext 0.18.1.1_2  is active
    61 :debug:main Merging existing variants '' into variants
    62 :debug:main new fully merged portvariants:
    63 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
    64 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    65 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    66 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    67 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    68 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    69 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    70 :debug:main universal variant already exists, so not adding the default one
    71 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
    72 :debug:main epoch: in tree: 0 installed: 0
    73 :debug:main libiconv 1.14_0 exists in the ports tree
    74 :debug:main libiconv 1.14_0  is the latest installed
    75 :debug:main libiconv 1.14_0  is active
    76 :debug:main Merging existing variants '' into variants
    77 :debug:main new fully merged portvariants:
    78 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
    79 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    80 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    81 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    82 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    83 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    84 :debug:main universal variant already exists, so not adding the default one
    85 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
    86 :debug:main epoch: in tree: 0 installed: 0
    87 :debug:main ncurses 5.9_1 exists in the ports tree
    88 :debug:main ncurses 5.9_1  is the latest installed
    89 :debug:main ncurses 5.9_1  is active
    90 :debug:main Merging existing variants '' into variants
    91 :debug:main new fully merged portvariants:
    92 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
    93 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    94 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    95 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    96 :debug:main adding the default universal variant
    97 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    98 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
    99 :debug:main epoch: in tree: 0 installed: 0
    100 :debug:main expat 2.1.0_0 exists in the ports tree
    101 :debug:main expat 2.1.0_0  is the latest installed
    102 :debug:main expat 2.1.0_0  is active
    103 :debug:main Merging existing variants '' into variants
    104 :debug:main new fully merged portvariants:
    105 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
    106 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    107 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    108 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    109 :debug:main adding the default universal variant
    110 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    111 :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
    112 :debug:main epoch: in tree: 0 installed: 0
    113 :debug:main zlib 1.2.7_0 exists in the ports tree
    114 :debug:main zlib 1.2.7_0  is the latest installed
    115 :debug:main zlib 1.2.7_0  is active
    116 :debug:main Merging existing variants '' into variants
    117 :debug:main new fully merged portvariants:
    118 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
    119 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    120 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    121 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    122 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
    123 :debug:main adding the default universal variant
    124 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    125 :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
    126 :debug:main epoch: in tree: 0 installed: 0
    127 :debug:main libffi 3.0.11_0 exists in the ports tree
    128 :debug:main libffi 3.0.11_0  is the latest installed
    129 :debug:main libffi 3.0.11_0  is active
    130 :debug:main Merging existing variants '' into variants
    131 :debug:main new fully merged portvariants:
    132 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
    133 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    134 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    135 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    136 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    137 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    138 :debug:main universal variant already exists, so not adding the default one
    139 :debug:main No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
    140 :debug:main epoch: in tree: 0 installed: 0
    141 :debug:main perl5 5.12.4_0 exists in the ports tree
    142 :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
    143 :debug:main perl5 5.12.4_0 +perl5_12 is active
    144 :debug:main Merging existing variants '+perl5_12' into variants
    145 :debug:main new fully merged portvariants: perl5_12 +
    146 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
    147 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    148 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    149 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    150 :debug:main universal_variant is false, so not adding the default universal variant
    151 :debug:main Executing variant perl5_12 provides perl5_12
    152 :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
    153 :debug:main epoch: in tree: 0 installed: 0
    154 :debug:main perl5.12 5.12.4_1 exists in the ports tree
    155 :debug:main perl5.12 5.12.4_1  is the latest installed
    156 :debug:main perl5.12 5.12.4_1  is active
    157 :debug:main Merging existing variants '' into variants
    158 :debug:main new fully merged portvariants:
    159 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
    160 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    161 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    162 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    163 :debug:main adding the default universal variant
    164 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    165 :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
    166 :debug:main epoch: in tree: 0 installed: 0
    167 :debug:main gdbm 1.10_2 exists in the ports tree
    168 :debug:main gdbm 1.10_2  is the latest installed
    169 :debug:main gdbm 1.10_2  is active
    170 :debug:main Merging existing variants '' into variants
    171 :debug:main new fully merged portvariants:
    172 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
    173 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    174 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    175 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    176 :debug:main adding the default universal variant
    177 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    178 :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
    179 :debug:main epoch: in tree: 2 installed: 2
    180 :debug:main python27 2.7.3_0 exists in the ports tree
    181 :debug:main python27 2.7.3_0  is the latest installed
    182 :debug:main python27 2.7.3_0  is active
    183 :debug:main Merging existing variants '' into variants
    184 :debug:main new fully merged portvariants:
    185 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
    186 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    187 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    188 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    189 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
    190 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    191 :debug:main universal variant already exists, so not adding the default one
    192 :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
    193 :debug:main epoch: in tree: 1 installed: 1
    194 :debug:main openssl 1.0.1c_0 exists in the ports tree
    195 :debug:main openssl 1.0.1c_0  is the latest installed
    196 :debug:main openssl 1.0.1c_0  is active
    197 :debug:main Merging existing variants '' into variants
    198 :debug:main new fully merged portvariants:
    199 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
    200 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    201 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    202 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    203 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    204 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    205 :debug:main universal variant already exists, so not adding the default one
    206 :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
    207 :debug:main epoch: in tree: 0 installed: 0
    208 :debug:main sqlite3 3.7.13_0 exists in the ports tree
    209 :debug:main sqlite3 3.7.13_0  is the latest installed
    210 :debug:main sqlite3 3.7.13_0  is active
    211 :debug:main Merging existing variants '' into variants
    212 :debug:main new fully merged portvariants:
    213 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
    214 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    215 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    216 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    217 :debug:main adding the default universal variant
    218 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    219 :debug:main No need to upgrade! sqlite3 3.7.13_0 >= sqlite3 3.7.13_0
    220 :debug:main epoch: in tree: 20090923 installed: 20090923
    221 :debug:main libedit 20120601-3.0_0 exists in the ports tree
    222 :debug:main libedit 20120601-3.0_0  is the latest installed
    223 :debug:main libedit 20120601-3.0_0  is active
    224 :debug:main Merging existing variants '' into variants
    225 :debug:main new fully merged portvariants:
    226 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
    227 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    228 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    229 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    230 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    231 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    232 :debug:main universal variant already exists, so not adding the default one
    233 :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0
    234 :debug:main epoch: in tree: 0 installed: 0
    235 :debug:main db46 4.6.21_6 exists in the ports tree
    236 :debug:main db46 4.6.21_6 +java is the latest installed
    237 :debug:main db46 4.6.21_6 +java is active
    238 :debug:main Merging existing variants '+java' into variants
    239 :debug:main new fully merged portvariants: java +
    240 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
    241 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    242 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    243 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    244 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    245 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    246 :debug:main universal variant already exists, so not adding the default one
    247 :debug:main Executing variant java provides java
    248 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
    249 :debug:main epoch: in tree: 0 installed: 0
    250 :debug:main bzip2 1.0.6_0 exists in the ports tree
    251 :debug:main bzip2 1.0.6_0  is the latest installed
    252 :debug:main bzip2 1.0.6_0  is active
    253 :debug:main Merging existing variants '' into variants
    254 :debug:main new fully merged portvariants:
    255 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
    256 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    257 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    258 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    259 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    260 :debug:main universal variant already exists, so not adding the default one
    261 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
    262 :debug:main epoch: in tree: 0 installed: 0
    263 :debug:main python_select 0.3_1 exists in the ports tree
    264 :debug:main python_select 0.3_1  is the latest installed
    265 :debug:main python_select 0.3_1  is active
    266 :debug:main Merging existing variants '' into variants
    267 :debug:main new fully merged portvariants:
    268 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
    269 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    270 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    271 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    272 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
    273 :debug:main universal_variant is false, so not adding the default universal variant
    274 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
    275 :debug:main epoch: in tree: 0 installed: 0
    276 :debug:main gobject-introspection 1.32.1_3 exists in the ports tree
    277 :debug:main gobject-introspection 1.32.1_3  is the latest installed
    278 :debug:main gobject-introspection 1.32.1_3  is active
    279 :debug:main Merging existing variants '' into variants
    280 :debug:main new fully merged portvariants:
    281 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gobject-introspection
    282 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    283 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    284 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    285 :debug:main adding the default universal variant
    286 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    287 :debug:main No need to upgrade! gobject-introspection 1.32.1_3 >= gobject-introspection 1.32.1_3
    288 :debug:main epoch: in tree: 0 installed: 0
    289 :debug:main cairo 1.12.2_0 exists in the ports tree
    290 :debug:main cairo 1.12.2_0 +x11 is the latest installed
    291 :debug:main cairo 1.12.2_0 +x11 is active
    292 :debug:main Merging existing variants '+x11' into variants
    293 :debug:main new fully merged portvariants: x11 +
    294 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
    295 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    296 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    297 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    298 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    299 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    300 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    301 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
    302 :debug:main universal variant already exists, so not adding the default one
    303 :debug:main Executing variant x11 provides x11
    304 :debug:main No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
    305 :debug:main epoch: in tree: 0 installed: 0
    306 :debug:main libpixman 0.26.2_0 exists in the ports tree
    307 :debug:main libpixman 0.26.2_0  is the latest installed
    308 :debug:main libpixman 0.26.2_0  is active
    309 :debug:main Merging existing variants '' into variants
    310 :debug:main new fully merged portvariants:
    311 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
    312 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    313 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    314 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    315 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    316 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    317 :debug:main universal variant already exists, so not adding the default one
    318 :debug:main No need to upgrade! libpixman 0.26.2_0 >= libpixman 0.26.2_0
    319 :debug:main epoch: in tree: 0 installed: 0
    320 :debug:main fontconfig 2.9.0_1 exists in the ports tree
    321 :debug:main fontconfig 2.9.0_1  is the latest installed
    322 :debug:main fontconfig 2.9.0_1  is active
    323 :debug:main Merging existing variants '' into variants
    324 :debug:main new fully merged portvariants:
    325 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
    326 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    327 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    328 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    329 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    330 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    331 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    332 :debug:main universal variant already exists, so not adding the default one
    333 :debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
    334 :debug:main epoch: in tree: 0 installed: 0
    335 :debug:main freetype 2.4.10_0 exists in the ports tree
    336 :debug:main freetype 2.4.10_0  is the latest installed
    337 :debug:main freetype 2.4.10_0  is active
    338 :debug:main Merging existing variants '' into variants
    339 :debug:main new fully merged portvariants:
    340 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
    341 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    342 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    343 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    344 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    345 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    346 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    347 :debug:main universal variant already exists, so not adding the default one
    348 :debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
    349 :debug:main epoch: in tree: 0 installed: 0
    350 :debug:main libpng 1.4.12_0 exists in the ports tree
    351 :debug:main libpng 1.4.12_0  is the latest installed
    352 :debug:main libpng 1.4.12_0  is active
    353 :debug:main Merging existing variants '' into variants
    354 :debug:main new fully merged portvariants:
    355 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
    356 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    357 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    358 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    359 :debug:main adding the default universal variant
    360 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    361 :debug:main No need to upgrade! libpng 1.4.12_0 >= libpng 1.4.12_0
    362 :debug:main epoch: in tree: 0 installed: 0
    363 :debug:main xrender 0.9.7_0 exists in the ports tree
    364 :debug:main xrender 0.9.7_0  is the latest installed
    365 :debug:main xrender 0.9.7_0  is active
    366 :debug:main Merging existing variants '' into variants
    367 :debug:main new fully merged portvariants:
    368 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
    369 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    370 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    371 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    372 :debug:main adding the default universal variant
    373 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    374 :debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
    375 :debug:main epoch: in tree: 0 installed: 0
    376 :debug:main xorg-libX11 1.5.0_0 exists in the ports tree
    377 :debug:main xorg-libX11 1.5.0_0  is the latest installed
    378 :debug:main xorg-libX11 1.5.0_0  is active
    379 :debug:main Merging existing variants '' into variants
    380 :debug:main new fully merged portvariants:
    381 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11
    382 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    383 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    384 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    385 :debug:main adding the default universal variant
    386 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    387 :debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
    388 :debug:main epoch: in tree: 0 installed: 0
    389 :debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
    390 :debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
    391 :debug:main xorg-libXdmcp 1.1.1_0  is active
    392 :debug:main Merging existing variants '' into variants
    393 :debug:main new fully merged portvariants:
    394 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp
    395 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    396 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    397 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    398 :debug:main adding the default universal variant
    399 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    400 :debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
    401 :debug:main epoch: in tree: 0 installed: 0
    402 :debug:main xorg-libXau 1.0.7_0 exists in the ports tree
    403 :debug:main xorg-libXau 1.0.7_0  is the latest installed
    404 :debug:main xorg-libXau 1.0.7_0  is active
    405 :debug:main Merging existing variants '' into variants
    406 :debug:main new fully merged portvariants:
    407 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau
    408 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    409 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    410 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    411 :debug:main adding the default universal variant
    412 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    413 :debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
    414 :debug:main epoch: in tree: 0 installed: 0
    415 :debug:main xorg-xproto 7.0.23_0 exists in the ports tree
    416 :debug:main xorg-xproto 7.0.23_0  is the latest installed
    417 :debug:main xorg-xproto 7.0.23_0  is active
    418 :debug:main Merging existing variants '' into variants
    419 :debug:main new fully merged portvariants:
    420 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto
    421 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    422 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    423 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    424 :debug:main only one arch supported, so not adding the default universal variant
    425 :debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
    426 :debug:main epoch: in tree: 0 installed: 0
    427 :debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
    428 :debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed
    429 :debug:main xorg-libxcb 1.8.1_2 +python27 is active
    430 :debug:main Merging existing variants '+python27' into variants
    431 :debug:main new fully merged portvariants: python27 +
    432 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb
    433 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    434 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    435 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    436 :debug:main adding the default universal variant
    437 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    438 :debug:main Executing variant python27 provides python27
    439 :debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
    440 :debug:main epoch: in tree: 0 installed: 0
    441 :debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
    442 :debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
    443 :debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
    444 :debug:main Merging existing variants '+python27' into variants
    445 :debug:main new fully merged portvariants: python27 +
    446 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto
    447 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    448 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    449 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    450 :debug:main only one arch supported, so not adding the default universal variant
    451 :debug:main Executing variant python27 provides python27
    452 :debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto 1.7.1_0
    453 :debug:main epoch: in tree: 0 installed: 0
    454 :debug:main libxml2 2.7.8_0 exists in the ports tree
    455 :debug:main libxml2 2.7.8_0  is the latest installed
    456 :debug:main libxml2 2.7.8_0  is active
    457 :debug:main Merging existing variants '' into variants
    458 :debug:main new fully merged portvariants:
    459 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
    460 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    461 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    462 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    463 :debug:main adding the default universal variant
    464 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    465 :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
    466 :debug:main epoch: in tree: 0 installed: 0
    467 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
    468 :debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
    469 :debug:main xorg-libpthread-stubs 0.3_0  is active
    470 :debug:main Merging existing variants '' into variants
    471 :debug:main new fully merged portvariants:
    472 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs
    473 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    474 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    475 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    476 :debug:main only one arch supported, so not adding the default universal variant
    477 :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
    478 :debug:main epoch: in tree: 0 installed: 0
    479 :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
    480 :debug:main xorg-kbproto 1.0.6_0  is the latest installed
    481 :debug:main xorg-kbproto 1.0.6_0  is active
    482 :debug:main Merging existing variants '' into variants
    483 :debug:main new fully merged portvariants:
    484 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto
    485 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    486 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    487 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    488 :debug:main only one arch supported, so not adding the default universal variant
    489 :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
    490 :debug:main epoch: in tree: 0 installed: 0
    491 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
    492 :debug:main xorg-renderproto 0.11.1_0  is the latest installed
    493 :debug:main xorg-renderproto 0.11.1_0  is active
    494 :debug:main Merging existing variants '' into variants
    495 :debug:main new fully merged portvariants:
    496 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto
    497 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    498 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    499 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    500 :debug:main only one arch supported, so not adding the default universal variant
    501 :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
    502 :debug:main epoch: in tree: 0 installed: 0
    503 :debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
    504 :debug:main xorg-xcb-util 0.3.9_0  is the latest installed
    505 :debug:main xorg-xcb-util 0.3.9_0  is active
    506 :debug:main Merging existing variants '' into variants
    507 :debug:main new fully merged portvariants:
    508 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-util
    509 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    510 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    511 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    512 :debug:main adding the default universal variant
    513 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    514 :debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util 0.3.9_0
    515 :debug:main epoch: in tree: 1 installed: 1
    516 :debug:main pango 1.30.1_1 exists in the ports tree
    517 :debug:main pango 1.30.1_1 +x11 is the latest installed
    518 :debug:main pango 1.30.1_1 +x11 is active
    519 :debug:main Merging existing variants '+x11' into variants
    520 :debug:main new fully merged portvariants: x11 +
    521 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
    522 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    523 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    524 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    525 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    526 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    527 :debug:main adding the default universal variant
    528 :debug:main Executing variant x11 provides x11
    529 :debug:main No need to upgrade! pango 1.30.1_1 >= pango 1.30.1_1
    530 :debug:main epoch: in tree: 0 installed: 0
    531 :debug:main Xft2 2.3.1_0 exists in the ports tree
    532 :debug:main Xft2 2.3.1_0  is the latest installed
    533 :debug:main Xft2 2.3.1_0  is active
    534 :debug:main Merging existing variants '' into variants
    535 :debug:main new fully merged portvariants:
    536 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
    537 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    538 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    539 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    540 :debug:main adding the default universal variant
    541 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    542 :debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
    543 :debug:main epoch: in tree: 2 installed: 2
    544 :debug:main gdk-pixbuf2 2.26.2_0 exists in the ports tree
    545 :debug:main gdk-pixbuf2 2.26.2_0  is the latest installed
    546 :debug:main gdk-pixbuf2 2.26.2_0  is active
    547 :debug:main Merging existing variants '' into variants
    548 :debug:main new fully merged portvariants:
    549 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gdk-pixbuf2
    550 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    551 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    552 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    553 :debug:main adding the default universal variant
    554 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    555 :debug:main No need to upgrade! gdk-pixbuf2 2.26.2_0 >= gdk-pixbuf2 2.26.2_0
    556 :debug:main epoch: in tree: 0 installed: 0
    557 :debug:main jasper 1.900.1_9 exists in the ports tree
    558 :debug:main jasper 1.900.1_9  is the latest installed
    559 :debug:main jasper 1.900.1_9  is active
    560 :debug:main Merging existing variants '' into variants
    561 :debug:main new fully merged portvariants:
    562 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
    563 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    564 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    565 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    566 :debug:main adding the default universal variant
    567 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    568 :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
    569 :debug:main epoch: in tree: 0 installed: 0
    570 :debug:main jpeg 8d_0 exists in the ports tree
    571 :debug:main jpeg 8d_0  is the latest installed
    572 :debug:main jpeg 8d_0  is active
    573 :debug:main Merging existing variants '' into variants
    574 :debug:main new fully merged portvariants:
    575 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
    576 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    577 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    578 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    579 :debug:main adding the default universal variant
    580 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    581 :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
    582 :debug:main epoch: in tree: 0 installed: 0
    583 :debug:main tiff 3.9.5_0 exists in the ports tree
    584 :debug:main tiff 3.9.5_0  is the latest installed
    585 :debug:main tiff 3.9.5_0  is active
    586 :debug:main Merging existing variants '' into variants
    587 :debug:main new fully merged portvariants:
    588 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
    589 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    590 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    591 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    592 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
    593 :debug:main adding the default universal variant
    594 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    595 :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
    596 :debug:main epoch: in tree: 0 installed: 0
    597 :debug:main xorg-libXi 1.6.1_0 exists in the ports tree
    598 :debug:main xorg-libXi 1.6.1_0  is the latest installed
    599 :debug:main xorg-libXi 1.6.1_0  is active
    600 :debug:main Merging existing variants '' into variants
    601 :debug:main new fully merged portvariants:
    602 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXi
    603 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    604 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    605 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    606 :debug:main adding the default universal variant
    607 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    608 :debug:main No need to upgrade! xorg-libXi 1.6.1_0 >= xorg-libXi 1.6.1_0
    609 :debug:main epoch: in tree: 0 installed: 0
    610 :debug:main xorg-libXext 1.3.1_0 exists in the ports tree
    611 :debug:main xorg-libXext 1.3.1_0  is the latest installed
    612 :debug:main xorg-libXext 1.3.1_0  is active
    613 :debug:main Merging existing variants '' into variants
    614 :debug:main new fully merged portvariants:
    615 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext
    616 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    617 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    618 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    619 :debug:main adding the default universal variant
    620 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    621 :debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
    622 :debug:main epoch: in tree: 0 installed: 0
    623 :debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
    624 :debug:main xorg-xextproto 7.2.1_0  is the latest installed
    625 :debug:main xorg-xextproto 7.2.1_0  is active
    626 :debug:main Merging existing variants '' into variants
    627 :debug:main new fully merged portvariants:
    628 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto
    629 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    630 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    631 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    632 :debug:main only one arch supported, so not adding the default universal variant
    633 :debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0
    634 :debug:main epoch: in tree: 0 installed: 0
    635 :debug:main xorg-inputproto 2.2_0 exists in the ports tree
    636 :debug:main xorg-inputproto 2.2_0  is the latest installed
    637 :debug:main xorg-inputproto 2.2_0  is active
    638 :debug:main Merging existing variants '' into variants
    639 :debug:main new fully merged portvariants:
    640 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-inputproto
    641 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    642 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    643 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    644 :debug:main only one arch supported, so not adding the default universal variant
    645 :debug:main No need to upgrade! xorg-inputproto 2.2_0 >= xorg-inputproto 2.2_0
    646 :debug:main epoch: in tree: 0 installed: 0
    647 :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
    648 :debug:main xorg-libXrandr 1.3.2_0  is the latest installed
    649 :debug:main xorg-libXrandr 1.3.2_0  is active
    650 :debug:main Merging existing variants '' into variants
    651 :debug:main new fully merged portvariants:
    652 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXrandr
    653 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    654 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    655 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    656 :debug:main adding the default universal variant
    657 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    658 :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr 1.3.2_0
    659 :debug:main epoch: in tree: 0 installed: 0
    660 :debug:main xorg-randrproto 1.4.0_0 exists in the ports tree
    661 :debug:main xorg-randrproto 1.4.0_0  is the latest installed
    662 :debug:main xorg-randrproto 1.4.0_0  is active
    663 :debug:main Merging existing variants '' into variants
    664 :debug:main new fully merged portvariants:
    665 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-randrproto
    666 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    667 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    668 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    669 :debug:main only one arch supported, so not adding the default universal variant
    670 :debug:main No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-randrproto 1.4.0_0
    671 :debug:main epoch: in tree: 0 installed: 0
    672 :debug:main xorg-libXcursor 1.1.13_0 exists in the ports tree
    673 :debug:main xorg-libXcursor 1.1.13_0  is the latest installed
    674 :debug:main xorg-libXcursor 1.1.13_0  is active
    675 :debug:main Merging existing variants '' into variants
    676 :debug:main new fully merged portvariants:
    677 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXcursor
    678 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    679 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    680 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    681 :debug:main adding the default universal variant
    682 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    683 :debug:main No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-libXcursor 1.1.13_0
    684 :debug:main epoch: in tree: 0 installed: 0
    685 :debug:main xorg-libXfixes 5.0_0 exists in the ports tree
    686 :debug:main xorg-libXfixes 5.0_0  is the latest installed
    687 :debug:main xorg-libXfixes 5.0_0  is active
    688 :debug:main Merging existing variants '' into variants
    689 :debug:main new fully merged portvariants:
    690 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXfixes
    691 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    692 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    693 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    694 :debug:main adding the default universal variant
    695 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    696 :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0
    697 :debug:main epoch: in tree: 0 installed: 0
    698 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree
    699 :debug:main xorg-fixesproto 5.0_0  is the latest installed
    700 :debug:main xorg-fixesproto 5.0_0  is active
    701 :debug:main Merging existing variants '' into variants
    702 :debug:main new fully merged portvariants:
    703 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-fixesproto
    704 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    705 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    706 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    707 :debug:main only one arch supported, so not adding the default universal variant
    708 :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0
    709 :debug:main epoch: in tree: 0 installed: 0
    710 :debug:main xorg-libXinerama 1.1.2_0 exists in the ports tree
    711 :debug:main xorg-libXinerama 1.1.2_0  is the latest installed
    712 :debug:main xorg-libXinerama 1.1.2_0  is active
    713 :debug:main Merging existing variants '' into variants
    714 :debug:main new fully merged portvariants:
    715 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXinerama
    716 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    717 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    718 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    719 :debug:main adding the default universal variant
    720 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    721 :debug:main No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-libXinerama 1.1.2_0
    722 :debug:main epoch: in tree: 0 installed: 0
    723 :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
    724 :debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
    725 :debug:main xorg-xineramaproto 1.2.1_0  is active
    726 :debug:main Merging existing variants '' into variants
    727 :debug:main new fully merged portvariants:
    728 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xineramaproto
    729 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    730 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    731 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    732 :debug:main only one arch supported, so not adding the default universal variant
    733 :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0
    734 :debug:main epoch: in tree: 0 installed: 0
    735 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
    736 :debug:main xorg-libXdamage 1.1.3_0  is the latest installed
    737 :debug:main xorg-libXdamage 1.1.3_0  is active
    738 :debug:main Merging existing variants '' into variants
    739 :debug:main new fully merged portvariants:
    740 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdamage
    741 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    742 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    743 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    744 :debug:main adding the default universal variant
    745 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    746 :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0
    747 :debug:main epoch: in tree: 0 installed: 0
    748 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
    749 :debug:main xorg-damageproto 1.2.1_0  is the latest installed
    750 :debug:main xorg-damageproto 1.2.1_0  is active
    751 :debug:main Merging existing variants '' into variants
    752 :debug:main new fully merged portvariants:
    753 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-damageproto
    754 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    755 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    756 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    757 :debug:main only one arch supported, so not adding the default universal variant
    758 :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0
    759 :debug:main epoch: in tree: 0 installed: 0
    760 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
    761 :debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
    762 :debug:main xorg-libXcomposite 0.4.3_0  is active
    763 :debug:main Merging existing variants '' into variants
    764 :debug:main new fully merged portvariants:
    765 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXcomposite
    766 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    767 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    768 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    769 :debug:main adding the default universal variant
    770 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    771 :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-libXcomposite 0.4.3_0
    772 :debug:main epoch: in tree: 0 installed: 0
    773 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
    774 :debug:main xorg-compositeproto 0.4.2_0  is the latest installed
    775 :debug:main xorg-compositeproto 0.4.2_0  is active
    776 :debug:main Merging existing variants '' into variants
    777 :debug:main new fully merged portvariants:
    778 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-compositeproto
    779 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    780 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    781 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    782 :debug:main only one arch supported, so not adding the default universal variant
    783 :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0
    784 :debug:main epoch: in tree: 0 installed: 0
    785 :debug:main shared-mime-info 1.0_0 exists in the ports tree
    786 :debug:main shared-mime-info 1.0_0  is the latest installed
    787 :debug:main shared-mime-info 1.0_0  is active
    788 :debug:main Merging existing variants '' into variants
    789 :debug:main new fully merged portvariants:
    790 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/shared-mime-info
    791 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    792 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    793 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    794 :debug:main adding the default universal variant
    795 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    796 :debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info 1.0_0
    797 :debug:main epoch: in tree: 0 installed: 0
    798 :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
    799 :debug:main hicolor-icon-theme 0.12_0  is the latest installed
    800 :debug:main hicolor-icon-theme 0.12_0  is active
    801 :debug:main Merging existing variants '' into variants
    802 :debug:main new fully merged portvariants:
    803 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/hicolor-icon-theme
    804 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    805 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    806 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    807 :debug:main only one arch supported, so not adding the default universal variant
    808 :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0
    809 :debug:main epoch: in tree: 1 installed: 1
    810 :debug:main webkit-gtk 1.6.3_4 exists in the ports tree
    811 :debug:main webkit-gtk 1.6.3_4 +svg+video is the latest installed
    812 :debug:main webkit-gtk 1.6.3_4 +svg+video is active
    813 :debug:main Merging existing variants '+svg+video' into variants
    814 :debug:main new fully merged portvariants: svg + video +
    815 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/www/webkit-gtk
    816 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    817 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    818 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    819 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    820 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    821 :debug:main universal variant already exists, so not adding the default one
    822 :debug:main Executing variant video provides video
    823 :debug:main Executing variant svg provides svg
    824 :debug:main No need to upgrade! webkit-gtk 1.6.3_4 >= webkit-gtk 1.6.3_4
    825 :debug:main epoch: in tree: 0 installed: 0
    826 :debug:main libsoup 2.38.1_0 exists in the ports tree
    827 :debug:main libsoup 2.38.1_0  is the latest installed
    828 :debug:main libsoup 2.38.1_0  is active
    829 :debug:main Merging existing variants '' into variants
    830 :debug:main new fully merged portvariants:
    831 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libsoup
    832 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    833 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    834 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    835 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    836 :debug:main adding the default universal variant
    837 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    838 :debug:main No need to upgrade! libsoup 2.38.1_0 >= libsoup 2.38.1_0
    839 :debug:main epoch: in tree: 0 installed: 0
    840 :debug:main glib-networking 2.28.7_4 exists in the ports tree
    841 :debug:main glib-networking 2.28.7_4  is the latest installed
    842 :debug:main glib-networking 2.28.7_4  is active
    843 :debug:main Merging existing variants '' into variants
    844 :debug:main new fully merged portvariants:
    845 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/glib-networking
    846 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    847 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    848 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    849 :debug:main adding the default universal variant
    850 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    851 :debug:main No need to upgrade! glib-networking 2.28.7_4 >= glib-networking 2.28.7_4
    852 :debug:main epoch: in tree: 0 installed: 0
    853 :debug:main gnutls 2.12.19_0 exists in the ports tree
    854 :debug:main gnutls 2.12.19_0  is the latest installed
    855 :debug:main gnutls 2.12.19_0  is active
    856 :debug:main Merging existing variants '' into variants
    857 :debug:main new fully merged portvariants:
    858 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls
    859 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    860 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    861 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    862 :debug:main adding the default universal variant
    863 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    864 :debug:main No need to upgrade! gnutls 2.12.19_0 >= gnutls 2.12.19_0
    865 :debug:main epoch: in tree: 0 installed: 0
    866 :debug:main libgcrypt 1.5.0_0 exists in the ports tree
    867 :debug:main libgcrypt 1.5.0_0  is the latest installed
    868 :debug:main libgcrypt 1.5.0_0  is active
    869 :debug:main Merging existing variants '' into variants
    870 :debug:main new fully merged portvariants:
    871 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt
    872 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    873 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    874 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    875 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    876 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    877 :debug:main universal variant already exists, so not adding the default one
    878 :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0
    879 :debug:main epoch: in tree: 0 installed: 0
    880 :debug:main libgpg-error 1.10_0 exists in the ports tree
    881 :debug:main libgpg-error 1.10_0  is the latest installed
    882 :debug:main libgpg-error 1.10_0  is active
    883 :debug:main Merging existing variants '' into variants
    884 :debug:main new fully merged portvariants:
    885 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgpg-error
    886 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    887 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    888 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    889 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    890 :debug:main adding the default universal variant
    891 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    892 :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
    893 :debug:main epoch: in tree: 0 installed: 0
    894 :debug:main libtasn1 2.11_0 exists in the ports tree
    895 :debug:main libtasn1 2.11_0  is the latest installed
    896 :debug:main libtasn1 2.11_0  is active
    897 :debug:main Merging existing variants '' into variants
    898 :debug:main new fully merged portvariants:
    899 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1
    900 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    901 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    902 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    903 :debug:main adding the default universal variant
    904 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    905 :debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0
    906 :debug:main epoch: in tree: 0 installed: 0
    907 :debug:main lzo2 2.05_1 exists in the ports tree
    908 :debug:main lzo2 2.05_1  is the latest installed
    909 :debug:main lzo2 2.05_1  is active
    910 :debug:main Merging existing variants '' into variants
    911 :debug:main new fully merged portvariants:
    912 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2
    913 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    914 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    915 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    916 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    917 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    918 :debug:main universal variant already exists, so not adding the default one
    919 :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1
    920 :debug:main epoch: in tree: 0 installed: 0
    921 :debug:main readline 6.2.000_0 exists in the ports tree
    922 :debug:main readline 6.2.000_0  is the latest installed
    923 :debug:main readline 6.2.000_0  is active
    924 :debug:main Merging existing variants '' into variants
    925 :debug:main new fully merged portvariants:
    926 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
    927 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    928 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    929 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    930 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    931 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    932 :debug:main universal variant already exists, so not adding the default one
    933 :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
    934 :debug:main epoch: in tree: 1 installed: 1
    935 :debug:main libproxy 0.4.7_0 exists in the ports tree
    936 :debug:main libproxy 0.4.7_0 +python27 is the latest installed
    937 :debug:main libproxy 0.4.7_0 +python27 is active
    938 :debug:main Merging existing variants '+python27' into variants
    939 :debug:main new fully merged portvariants: python27 +
    940 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libproxy
    941 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    942 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    943 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    944 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
    945 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
    946 :debug:main adding the default universal variant
    947 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    948 :debug:main Executing variant python27 provides python27
    949 :debug:main No need to upgrade! libproxy 0.4.7_0 >= libproxy 0.4.7_0
    950 :debug:main epoch: in tree: 1 installed: 1
    951 :debug:main gconf 2.28.1_3 exists in the ports tree
    952 :debug:main gconf 2.28.1_3  is the latest installed
    953 :debug:main gconf 2.28.1_3  is active
    954 :debug:main Merging existing variants '' into variants
    955 :debug:main new fully merged portvariants:
    956 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gconf
    957 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    958 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    959 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    960 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    961 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    962 :debug:main universal variant already exists, so not adding the default one
    963 :debug:main No need to upgrade! gconf 2.28.1_3 >= gconf 2.28.1_3
    964 :debug:main epoch: in tree: 0 installed: 0
    965 :debug:main dbus-glib 0.100_0 exists in the ports tree
    966 :debug:main dbus-glib 0.100_0  is the latest installed
    967 :debug:main dbus-glib 0.100_0  is active
    968 :debug:main Merging existing variants '' into variants
    969 :debug:main new fully merged portvariants:
    970 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus-glib
    971 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    972 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    973 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    974 :debug:main adding the default universal variant
    975 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    976 :debug:main No need to upgrade! dbus-glib 0.100_0 >= dbus-glib 0.100_0
    977 :debug:main epoch: in tree: 0 installed: 0
    978 :debug:main dbus 1.4.20_1 exists in the ports tree
    979 :debug:main dbus 1.4.20_1 +startupitem is the latest installed
    980 :debug:main dbus 1.4.20_1 +startupitem is active
    981 :debug:main Merging existing variants '+startupitem' into variants
    982 :debug:main new fully merged portvariants: startupitem +
    983 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus
    984 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    985 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    986 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    987 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    988 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    989 :debug:main universal variant already exists, so not adding the default one
    990 :debug:main Executing variant startupitem provides startupitem
    991 :debug:main No need to upgrade! dbus 1.4.20_1 >= dbus 1.4.20_1
    992 :debug:main epoch: in tree: 0 installed: 0
    993 :debug:main policykit 0.103_1 exists in the ports tree
    994 :debug:main policykit 0.103_1  is the latest installed
    995 :debug:main policykit 0.103_1  is active
    996 :debug:main Merging existing variants '' into variants
    997 :debug:main new fully merged portvariants:
    998 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/policykit
    999 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1000 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1001 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1002 :debug:main adding the default universal variant
    1003 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1004 :debug:main No need to upgrade! policykit 0.103_1 >= policykit 0.103_1
    1005 :debug:main epoch: in tree: 0 installed: 0
    1006 :debug:main eggdbus 0.6_1 exists in the ports tree
    1007 :debug:main eggdbus 0.6_1  is the latest installed
    1008 :debug:main eggdbus 0.6_1  is active
    1009 :debug:main Merging existing variants '' into variants
    1010 :debug:main new fully merged portvariants:
    1011 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/eggdbus
    1012 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1013 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1014 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1015 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1016 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1017 :debug:main universal variant already exists, so not adding the default one
    1018 :debug:main No need to upgrade! eggdbus 0.6_1 >= eggdbus 0.6_1
    1019 :debug:main epoch: in tree: 0 installed: 0
    1020 :debug:main p5-xml-parser 2.400.0_4 exists in the ports tree
    1021 :debug:main p5-xml-parser 2.400.0_4  is the latest installed
    1022 :debug:main no version of p5-xml-parser is active
    1023 :debug:main Merging existing variants '' into variants
    1024 :debug:main new fully merged portvariants:
    1025 :msg:main --->  p5-xml-parser is replaced by p5.12-xml-parser
    1026 :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-xml-parser
    1027 :debug:main OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1028 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1029 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1030 :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
    1031 :debug:main Re-registering default for livecheck.version
    1032 :debug:main Re-registering default for configure.universal_args
    1033 :debug:main adding the default universal variant
    1034 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1035 :debug:main ignoring versions, installing replacement port
    1036 :debug:main Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-xml-parser/p5.12-xml-parser/work /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-xml-parser/work
    1037 :debug:main changing euid/egid - current euid: 0 - current egid: 0
    1038 :debug:main egid changed to: 500
    1039 :debug:main euid changed to: 502
    1040 :debug:main Starting logging for p5.12-xml-parser
    1041 :debug:clean epoch: in tree: 0 installed: 0
    1042 :debug:clean orbit2 2.14.19_1 exists in the ports tree
    1043 :debug:clean orbit2 2.14.19_1  is the latest installed
    1044 :debug:clean orbit2 2.14.19_1  is active
    1045 :debug:clean Merging existing variants '' into variants
    1046 :debug:clean new fully merged portvariants:
    1047 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orbit2
    1048 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1049 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1050 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1051 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1052 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1053 :debug:clean universal variant already exists, so not adding the default one
    1054 :debug:clean No need to upgrade! orbit2 2.14.19_1 >= orbit2 2.14.19_1
    1055 :debug:clean epoch: in tree: 0 installed: 0
    1056 :debug:clean libidl 0.8.14_2 exists in the ports tree
    1057 :debug:clean libidl 0.8.14_2  is the latest installed
    1058 :debug:clean libidl 0.8.14_2  is active
    1059 :debug:clean Merging existing variants '' into variants
    1060 :debug:clean new fully merged portvariants:
    1061 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libidl
    1062 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1063 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1064 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1065 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1066 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1067 :debug:clean universal variant already exists, so not adding the default one
    1068 :debug:clean No need to upgrade! libidl 0.8.14_2 >= libidl 0.8.14_2
    1069 :debug:clean epoch: in tree: 0 installed: 0
    1070 :debug:clean curl-ca-bundle 7.27.0_0 exists in the ports tree
    1071 :debug:clean curl-ca-bundle 7.27.0_0  is the latest installed
    1072 :debug:clean curl-ca-bundle 7.27.0_0  is active
    1073 :debug:clean Merging existing variants '' into variants
    1074 :debug:clean new fully merged portvariants:
    1075 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/curl-ca-bundle
    1076 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1077 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1078 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1079 :debug:clean universal_variant is false, so not adding the default universal variant
    1080 :debug:clean No need to upgrade! curl-ca-bundle 7.27.0_0 >= curl-ca-bundle 7.27.0_0
    1081 :debug:clean epoch: in tree: 0 installed: 0
    1082 :debug:clean libgnome-keyring 2.30.1_1 exists in the ports tree
    1083 :debug:clean libgnome-keyring 2.30.1_1  is the latest installed
    1084 :debug:clean libgnome-keyring 2.30.1_1  is active
    1085 :debug:clean Merging existing variants '' into variants
    1086 :debug:clean new fully merged portvariants:
    1087 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/libgnome-keyring
    1088 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1089 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1090 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1091 :debug:clean adding the default universal variant
    1092 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1093 :debug:clean No need to upgrade! libgnome-keyring 2.30.1_1 >= libgnome-keyring 2.30.1_1
    1094 :debug:clean epoch: in tree: 1 installed: 1
    1095 :debug:clean gnome-keyring 2.30.3_4 exists in the ports tree
    1096 :debug:clean gnome-keyring 2.30.3_4  is the latest installed
    1097 :debug:clean gnome-keyring 2.30.3_4  is active
    1098 :debug:clean Merging existing variants '' into variants
    1099 :debug:clean new fully merged portvariants:
    1100 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gnome-keyring
    1101 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1102 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1103 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1104 :debug:clean adding the default universal variant
    1105 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1106 :debug:clean No need to upgrade! gnome-keyring 2.30.3_4 >= gnome-keyring 2.30.3_4
    1107 :debug:clean epoch: in tree: 0 installed: 0
    1108 :debug:clean gmake 3.82_0 exists in the ports tree
    1109 :debug:clean gmake 3.82_0  is the latest installed
    1110 :debug:clean gmake 3.82_0  is active
    1111 :debug:clean Merging existing variants '' into variants
    1112 :debug:clean new fully merged portvariants:
    1113 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmake
    1114 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1115 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1116 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1117 :debug:clean adding the default universal variant
    1118 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1119 :debug:clean No need to upgrade! gmake 3.82_0 >= gmake 3.82_0
    1120 :debug:clean epoch: in tree: 0 installed: 0
    1121 :debug:clean icu 4.8.1_0 exists in the ports tree
    1122 :debug:clean icu 4.8.1_0  is the latest installed
    1123 :debug:clean icu 4.8.1_0  is active
    1124 :debug:clean Merging existing variants '' into variants
    1125 :debug:clean new fully merged portvariants:
    1126 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
    1127 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1128 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1129 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1130 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1131 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1132 :debug:clean universal variant already exists, so not adding the default one
    1133 :debug:clean No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
    1134 :debug:clean epoch: in tree: 0 installed: 0
    1135 :debug:clean libxslt 1.1.26_0 exists in the ports tree
    1136 :debug:clean libxslt 1.1.26_0  is the latest installed
    1137 :debug:clean libxslt 1.1.26_0  is active
    1138 :debug:clean Merging existing variants '' into variants
    1139 :debug:clean new fully merged portvariants:
    1140 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
    1141 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1142 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1143 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1144 :debug:clean adding the default universal variant
    1145 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1146 :debug:clean No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
    1147 :debug:clean epoch: in tree: 0 installed: 0
    1148 :debug:clean enchant 1.6.0_1 exists in the ports tree
    1149 :debug:clean enchant 1.6.0_1  is the latest installed
    1150 :debug:clean enchant 1.6.0_1  is active
    1151 :debug:clean Merging existing variants '' into variants
    1152 :debug:clean new fully merged portvariants:
    1153 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/enchant
    1154 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1155 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1156 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1157 :debug:clean adding the default universal variant
    1158 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1159 :debug:clean No need to upgrade! enchant 1.6.0_1 >= enchant 1.6.0_1
    1160 :debug:clean epoch: in tree: 0 installed: 0
    1161 :debug:clean aspell 0.60.6_4 exists in the ports tree
    1162 :debug:clean aspell 0.60.6_4 +nonls is the latest installed
    1163 :debug:clean aspell 0.60.6_4 +nonls is active
    1164 :debug:clean Merging existing variants '+nonls' into variants
    1165 :debug:clean new fully merged portvariants: nonls +
    1166 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/aspell
    1167 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1168 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1169 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1170 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1171 :debug:clean adding the default universal variant
    1172 :debug:clean Executing variant nonls provides nonls
    1173 :debug:clean No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
    1174 :debug:clean epoch: in tree: 0 installed: 0
    1175 :debug:clean texinfo 4.13_2 exists in the ports tree
    1176 :debug:clean texinfo 4.13_2  is the latest installed
    1177 :debug:clean texinfo 4.13_2  is active
    1178 :debug:clean Merging existing variants '' into variants
    1179 :debug:clean new fully merged portvariants:
    1180 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texinfo
    1181 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1182 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1183 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1184 :debug:clean adding the default universal variant
    1185 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1186 :debug:clean No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
    1187 :debug:clean epoch: in tree: 0 installed: 0
    1188 :debug:clean hunspell 1.3.2_0 exists in the ports tree
    1189 :debug:clean hunspell 1.3.2_0  is the latest installed
    1190 :debug:clean hunspell 1.3.2_0  is active
    1191 :debug:clean Merging existing variants '' into variants
    1192 :debug:clean new fully merged portvariants:
    1193 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/hunspell
    1194 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1195 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1196 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1197 :debug:clean adding the default universal variant
    1198 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1199 :debug:clean No need to upgrade! hunspell 1.3.2_0 >= hunspell 1.3.2_0
    1200 :debug:clean epoch: in tree: 0 installed: 0
    1201 :debug:clean xorg-libXt 1.1.3_0 exists in the ports tree
    1202 :debug:clean xorg-libXt 1.1.3_0  is the latest installed
    1203 :debug:clean xorg-libXt 1.1.3_0  is active
    1204 :debug:clean Merging existing variants '' into variants
    1205 :debug:clean new fully merged portvariants:
    1206 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt
    1207 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1208 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1209 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1210 :debug:clean adding the default universal variant
    1211 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1212 :debug:clean No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
    1213 :debug:clean epoch: in tree: 0 installed: 0
    1214 :debug:clean xorg-libsm 1.2.1_0 exists in the ports tree
    1215 :debug:clean xorg-libsm 1.2.1_0  is the latest installed
    1216 :debug:clean xorg-libsm 1.2.1_0  is active
    1217 :debug:clean Merging existing variants '' into variants
    1218 :debug:clean new fully merged portvariants:
    1219 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm
    1220 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1221 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1222 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1223 :debug:clean adding the default universal variant
    1224 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1225 :debug:clean No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
    1226 :debug:clean epoch: in tree: 0 installed: 0
    1227 :debug:clean xorg-libice 1.0.8_0 exists in the ports tree
    1228 :debug:clean xorg-libice 1.0.8_0  is the latest installed
    1229 :debug:clean xorg-libice 1.0.8_0  is active
    1230 :debug:clean Merging existing variants '' into variants
    1231 :debug:clean new fully merged portvariants:
    1232 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice
    1233 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1234 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1235 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1236 :debug:clean adding the default universal variant
    1237 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1238 :debug:clean No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice 1.0.8_0
    1239 :debug:clean epoch: in tree: 0 installed: 0
    1240 :debug:clean gst-plugins-base 0.10.36_2 exists in the ports tree
    1241 :debug:clean gst-plugins-base 0.10.36_2  is the latest installed
    1242 :debug:clean gst-plugins-base 0.10.36_2  is active
    1243 :debug:clean Merging existing variants '' into variants
    1244 :debug:clean new fully merged portvariants:
    1245 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gst-plugins-base
    1246 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1247 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1248 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1249 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1250 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1251 :debug:clean universal variant already exists, so not adding the default one
    1252 :debug:clean No need to upgrade! gst-plugins-base 0.10.36_2 >= gst-plugins-base 0.10.36_2
    1253 :debug:clean epoch: in tree: 0 installed: 0
    1254 :debug:clean gstreamer 0.10.36_2 exists in the ports tree
    1255 :debug:clean gstreamer 0.10.36_2  is the latest installed
    1256 :debug:clean gstreamer 0.10.36_2  is active
    1257 :debug:clean Merging existing variants '' into variants
    1258 :debug:clean new fully merged portvariants:
    1259 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gstreamer
    1260 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1261 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1262 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1263 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1264 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1265 :debug:clean universal variant already exists, so not adding the default one
    1266 :debug:clean No need to upgrade! gstreamer 0.10.36_2 >= gstreamer 0.10.36_2
    1267 :debug:clean epoch: in tree: 0 installed: 0
    1268 :debug:clean bison 2.6.2_0 exists in the ports tree
    1269 :debug:clean bison 2.6.2_0  is the latest installed
    1270 :debug:clean bison 2.6.2_0  is active
    1271 :debug:clean Merging existing variants '' into variants
    1272 :debug:clean new fully merged portvariants:
    1273 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/bison
    1274 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1275 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1276 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1277 :debug:clean adding the default universal variant
    1278 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1279 :debug:clean No need to upgrade! bison 2.6.2_0 >= bison 2.6.2_0
    1280 :debug:clean epoch: in tree: 0 installed: 0
    1281 :debug:clean m4 1.4.16_0 exists in the ports tree
    1282 :debug:clean m4 1.4.16_0  is the latest installed
    1283 :debug:clean m4 1.4.16_0  is active
    1284 :debug:clean Merging existing variants '' into variants
    1285 :debug:clean new fully merged portvariants:
    1286 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
    1287 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1288 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1289 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1290 :debug:clean adding the default universal variant
    1291 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1292 :debug:clean No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
    1293 :debug:clean epoch: in tree: 0 installed: 0
    1294 :debug:clean flex 2.5.37_0 exists in the ports tree
    1295 :debug:clean flex 2.5.37_0  is the latest installed
    1296 :debug:clean flex 2.5.37_0  is active
    1297 :debug:clean Merging existing variants '' into variants
    1298 :debug:clean new fully merged portvariants:
    1299 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/flex
    1300 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1301 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1302 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1303 :debug:clean adding the default universal variant
    1304 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1305 :debug:clean No need to upgrade! flex 2.5.37_0 >= flex 2.5.37_0
    1306 :debug:clean epoch: in tree: 0 installed: 0
    1307 :debug:clean gnome-vfs 2.24.4_1 exists in the ports tree
    1308 :debug:clean gnome-vfs 2.24.4_1  is the latest installed
    1309 :debug:clean gnome-vfs 2.24.4_1  is active
    1310 :debug:clean Merging existing variants '' into variants
    1311 :debug:clean new fully merged portvariants:
    1312 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gnome-vfs
    1313 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1314 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1315 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1316 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1317 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1318 :debug:clean universal variant already exists, so not adding the default one
    1319 :debug:clean No need to upgrade! gnome-vfs 2.24.4_1 >= gnome-vfs 2.24.4_1
    1320 :debug:clean epoch: in tree: 0 installed: 0
    1321 :debug:clean desktop-file-utils 0.15_1 exists in the ports tree
    1322 :debug:clean desktop-file-utils 0.15_1  is the latest installed
    1323 :debug:clean desktop-file-utils 0.15_1  is active
    1324 :debug:clean Merging existing variants '' into variants
    1325 :debug:clean new fully merged portvariants:
    1326 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/desktop-file-utils
    1327 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1328 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1329 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1330 :debug:clean adding the default universal variant
    1331 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1332 :debug:clean No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-utils 0.15_1
    1333 :debug:clean epoch: in tree: 0 installed: 0
    1334 :debug:clean popt 1.16_0 exists in the ports tree
    1335 :debug:clean popt 1.16_0  is the latest installed
    1336 :debug:clean popt 1.16_0  is active
    1337 :debug:clean Merging existing variants '' into variants
    1338 :debug:clean new fully merged portvariants:
    1339 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/popt
    1340 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1341 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1342 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1343 :debug:clean adding the default universal variant
    1344 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1345 :debug:clean No need to upgrade! popt 1.16_0 >= popt 1.16_0
    1346 :debug:clean epoch: in tree: 0 installed: 0
    1347 :debug:clean gnome-mime-data 2.18.0_3 exists in the ports tree
    1348 :debug:clean gnome-mime-data 2.18.0_3  is the latest installed
    1349 :debug:clean gnome-mime-data 2.18.0_3  is active
    1350 :debug:clean Merging existing variants '' into variants
    1351 :debug:clean new fully merged portvariants:
    1352 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gnome-mime-data
    1353 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1354 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1355 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1356 :debug:clean only one arch supported, so not adding the default universal variant
    1357 :debug:clean No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-data 2.18.0_3
    1358 :debug:clean epoch: in tree: 1 installed: 1
    1359 :debug:clean libtheora 1.1.1_1 exists in the ports tree
    1360 :debug:clean libtheora 1.1.1_1  is the latest installed
    1361 :debug:clean libtheora 1.1.1_1  is active
    1362 :debug:clean Merging existing variants '' into variants
    1363 :debug:clean new fully merged portvariants:
    1364 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libtheora
    1365 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1366 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1367 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1368 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
    1369 :debug:clean adding the default universal variant
    1370 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1371 :debug:clean No need to upgrade! libtheora 1.1.1_1 >= libtheora 1.1.1_1
    1372 :debug:clean epoch: in tree: 0 installed: 0
    1373 :debug:clean libvorbis 1.3.3_0 exists in the ports tree
    1374 :debug:clean libvorbis 1.3.3_0  is the latest installed
    1375 :debug:clean libvorbis 1.3.3_0  is active
    1376 :debug:clean Merging existing variants '' into variants
    1377 :debug:clean new fully merged portvariants:
    1378 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/audio/libvorbis
    1379 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1380 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1381 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1382 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1383 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1384 :debug:clean universal variant already exists, so not adding the default one
    1385 :debug:clean No need to upgrade! libvorbis 1.3.3_0 >= libvorbis 1.3.3_0
    1386 :debug:clean epoch: in tree: 0 installed: 0
    1387 :debug:clean libogg 1.3.0_1 exists in the ports tree
    1388 :debug:clean libogg 1.3.0_1  is the latest installed
    1389 :debug:clean libogg 1.3.0_1  is active
    1390 :debug:clean Merging existing variants '' into variants
    1391 :debug:clean new fully merged portvariants:
    1392 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/multimedia/libogg
    1393 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1394 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1395 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1396 :debug:clean adding the default universal variant
    1397 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1398 :debug:clean No need to upgrade! libogg 1.3.0_1 >= libogg 1.3.0_1
    1399 :debug:clean epoch: in tree: 0 installed: 0
    1400 :debug:clean orc 0.4.16_0 exists in the ports tree
    1401 :debug:clean orc 0.4.16_0  is the latest installed
    1402 :debug:clean orc 0.4.16_0  is active
    1403 :debug:clean Merging existing variants '' into variants
    1404 :debug:clean new fully merged portvariants:
    1405 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/orc
    1406 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1407 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1408 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1409 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
    1410 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1411 :debug:clean universal variant already exists, so not adding the default one
    1412 :debug:clean No need to upgrade! orc 0.4.16_0 >= orc 0.4.16_0
    1413 :debug:clean epoch: in tree: 0 installed: 0
    1414 :debug:clean pkgconfig 0.27_0 exists in the ports tree
    1415 :debug:clean pkgconfig 0.27_0  is the latest installed
    1416 :debug:clean pkgconfig 0.27_0  is active
    1417 :debug:clean Merging existing variants '' into variants
    1418 :debug:clean new fully merged portvariants:
    1419 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
    1420 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1421 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1422 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1423 :debug:clean adding the default universal variant
    1424 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1425 :debug:clean No need to upgrade! pkgconfig 0.27_0 >= pkgconfig 0.27_0
    1426 :debug:clean epoch: in tree: 0 installed: 0
    1427 :debug:clean intltool 0.50.2_0 exists in the ports tree
    1428 :debug:clean intltool 0.50.2_0  is the latest installed
    1429 :debug:clean intltool 0.50.2_0  is active
    1430 :debug:clean Merging existing variants '' into variants
    1431 :debug:clean new fully merged portvariants:
    1432 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
    1433 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1434 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1435 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1436 :debug:clean only one arch supported, so not adding the default universal variant
    1437 :debug:clean No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
    1438 :debug:clean epoch: in tree: 0 installed: 0
    1439 :debug:clean p5.12-getopt-long 2.380.0_3 exists in the ports tree
    1440 :debug:clean p5.12-getopt-long 2.380.0_3  is the latest installed
    1441 :debug:clean p5.12-getopt-long 2.380.0_3  is active
    1442 :debug:clean Merging existing variants '' into variants
    1443 :debug:clean new fully merged portvariants:
    1444 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-getopt-long
    1445 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1446 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1447 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1448 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
    1449 :debug:clean Re-registering default for livecheck.version
    1450 :debug:clean Re-registering default for configure.universal_args
    1451 :debug:clean only one arch supported, so not adding the default universal variant
    1452 :debug:clean No need to upgrade! p5.12-getopt-long 2.380.0_3 >= p5.12-getopt-long 2.380.0_3
    1453 :debug:clean epoch: in tree: 0 installed: 0
    1454 :debug:clean p5.12-pathtools 3.330.0_3 exists in the ports tree
    1455 :debug:clean p5.12-pathtools 3.330.0_3  is the latest installed
    1456 :debug:clean p5.12-pathtools 3.330.0_3  is active
    1457 :debug:clean Merging existing variants '' into variants
    1458 :debug:clean new fully merged portvariants:
    1459 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
    1460 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1461 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1462 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1463 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
    1464 :debug:clean Re-registering default for livecheck.version
    1465 :debug:clean Re-registering default for configure.universal_args
    1466 :debug:clean adding the default universal variant
    1467 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1468 :debug:clean No need to upgrade! p5.12-pathtools 3.330.0_3 >= p5.12-pathtools 3.330.0_3
    1469 :debug:clean epoch: in tree: 0 installed: 0
    1470 :debug:clean p5.12-scalar-list-utils 1.230.0_3 exists in the ports tree
    1471 :debug:clean p5.12-scalar-list-utils 1.230.0_3  is the latest installed
    1472 :debug:clean p5.12-scalar-list-utils 1.230.0_3  is active
    1473 :debug:clean Merging existing variants '' into variants
    1474 :debug:clean new fully merged portvariants:
    1475 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-scalar-list-utils
    1476 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1477 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1478 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1479 :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
    1480 :debug:clean Re-registering default for livecheck.version
    1481 :debug:clean Re-registering default for configure.universal_args
    1482 :debug:clean adding the default universal variant
    1483 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1484 :debug:clean No need to upgrade! p5.12-scalar-list-utils 1.230.0_3 >= p5.12-scalar-list-utils 1.230.0_3
    1485 :debug:clean epoch: in tree: 0 installed: 0
    1486 :debug:clean libnotify 0.5.2_2 exists in the ports tree
    1487 :debug:clean libnotify 0.5.2_2  is the latest installed
    1488 :debug:clean libnotify 0.5.2_2  is active
    1489 :debug:clean Merging existing variants '' into variants
    1490 :debug:clean new fully merged portvariants:
    1491 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libnotify
    1492 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1493 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1494 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1495 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1496 :debug:clean adding the default universal variant
    1497 :debug:clean No need to upgrade! libnotify 0.5.2_2 >= libnotify 0.5.2_2
    1498 :debug:clean epoch: in tree: 0 installed: 0
    1499 :debug:clean vala 0.16.0_1 exists in the ports tree
    1500 :debug:clean vala 0.16.0_1  is the latest installed
    1501 :debug:clean vala 0.16.0_1  is active
    1502 :debug:clean Merging existing variants '' into variants
    1503 :debug:clean new fully merged portvariants:
    1504 :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/vala
    1505 :debug:clean OS darwin/8.11.0 (Mac OS X 10.4) arch powerpc
    1506 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
    1507 :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
    1508 :debug:clean adding the default universal variant
    1509 :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
    1510 :debug:clean No need to upgrade! vala 0.16.0_1 >= vala 0.16.0_1
    1511 :msg:clean --->  Computing dependencies for midori:info:clean .:debug:clean midori has no conflicts
    1512 :debug:clean Searching for dependency: gtk2
    1513 :debug:clean Found Dependency: receipt exists for gtk2
    1514 :debug:clean Searching for dependency: glib2
    1515 :debug:clean Found Dependency: receipt exists for glib2
    1516 :debug:clean Searching for dependency: webkit-gtk
    1517 :debug:clean Found Dependency: receipt exists for webkit-gtk
    1518 :debug:clean Searching for dependency: libxml2
    1519 :debug:clean Found Dependency: receipt exists for libxml2
    1520 :debug:clean Searching for dependency: pkgconfig
    1521 :debug:clean Found Dependency: receipt exists for pkgconfig
    1522 :debug:clean Searching for dependency: intltool
    1523 :debug:clean Found Dependency: receipt exists for intltool
    1524 :debug:clean Searching for dependency: libnotify
    1525 :debug:clean Found Dependency: receipt exists for libnotify
    1526 :debug:clean Searching for dependency: vala
    1527 :debug:clean Found Dependency: receipt exists for vala
    1528 :msg:clean
    1529 :debug:main Executing org.macports.main (midori)
    1530 :debug:main changing euid/egid - current euid: 0 - current egid: 0
    1531 :debug:main egid changed to: 500
    1532 :debug:main euid changed to: 502
    1533 :debug:main Skipping completed org.macports.archivefetch (midori)
    1534 :debug:main Privilege de-escalation not attempted as not running as root.
    1535 :debug:main Skipping completed org.macports.fetch (midori)
    1536 :debug:main Privilege de-escalation not attempted as not running as root.
    1537 :debug:main Skipping completed org.macports.checksum (midori)
    1538 :debug:main Privilege de-escalation not attempted as not running as root.
    1539 :debug:main Skipping completed org.macports.extract (midori)
    1540 :debug:main Privilege de-escalation not attempted as not running as root.
    1541 :debug:main Skipping completed org.macports.patch (midori)
    1542 :debug:main Privilege de-escalation not attempted as not running as root.
    1543 :debug:main Skipping completed org.macports.configure (midori)
    1544 :debug:main Privilege de-escalation not attempted as not running as root.
    1545 :debug:build build phase started at Sat Aug 18 10:25:16 CDT 2012
    1546 :notice:build --->  Building midori
    1547 :debug:build Executing org.macports.build (midori)
    1548 :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.4'
    1549 :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9" && /usr/bin/make -w all'
    1550 :debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9" && /usr/bin/make -w all
    1551 :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9'
    1552 :info:build Waf: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9/_build_'
    1553 :info:build [ 60/115] cc_link: _build_/default/midori/main_2.o -> _build_/default/midori/midori
    1554 :info:build /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: Undefined symbols:
    1555 :info:build _webkit_web_view_get_selected_text
    1556 :info:build collect2: ld returned 1 exit status
    1557 :info:build Waf: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9/_build_'
    1558 :info:build Build failed:  -> task failed (err #1):
    1559 :info:build     {task: cc_link main_2.o -> midori}
    1560 :info:build make: *** [all] Error 1
    1561 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9'
    1562 :info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/work/midori-0.2.9" && /usr/bin/make -w all
    1563 :info:build Exit code: 2
    1564 :error:build org.macports.build for port midori returned: command execution failed
    1565 :debug:build Error code: CHILDSTATUS 4753 2
    1566 :debug:build Backtrace: command execution failed
    1567     while executing
    1568 "system -nice 0 $fullcmdstring"
    1569     ("eval" body line 1)
    1570     invoked from within
    1571 "eval system $notty $nice \$fullcmdstring"
    1572     invoked from within
    1573 "command_exec build"
    1574     (procedure "portbuild::build_main" line 8)
    1575     invoked from within
    1576 "$procedure $targetname"
    1577 :info:build Warning: targets not executed for midori: org.macports.activate org.macports.build org.macports.destroot org.macports.install
    1578 :notice:build Please see the log file for port midori for details:
    1579     /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_midori/midori/main.log
     12(log contents removed by admin)