NEW: hplip -Unfinished port

[simX@…]

The official project page is ​http://hpoj.sourceforge.net/ . It's a project, supposedly funded by HP, that creates open-source drivers for HP's printers/scanners. It even supports scanning for HP's all-in-one models that don't seem to be widely support elsewhere.

There's also a FreeBSD port here, which might help: ​http:// www.freshports.org/graphics/hpoj . It seems that this can be installed by using a different package manager called pkg_add, but I wasn't able to find this for Mac OS X.

(hpoj supports printing and scanning, while the HPLIP software also mentioned on the hpoj project page only supports printing, and also supports fewer HP models. So hpoj would probably be better for a Fink package.)

[aschenke@…]

I'm working on adding HPLIP, which replaces HPOJ and has all the functionality. No guarantees I get it working, though. It seems to compile without problems once the dependencies are installed (libusb and jpeg), but there are a few difficulties. First, because it works with CUPS, it needs to install files outside the standard DP tree. I'm not clear on how best to handle this. Second, the user interface requires PyQt, which isn't available as a port yet (bug 3210). Third, PyQt depends on py-sip, which needs to be updated (bug 8473).

[aschenke@…]

Portfile for hplip 0.9.10 (EXPERIMENTAL)

[aschenke@…]

Portfile for hplip-0.9.10 (slightly-less-experimental)

[aschenke@…]

Portfile for hplip-0.9.10 (partly-working)

[aschenke@…]

patch for io/hpiod/device.cpp

[aschenke@…]

patch for io/hpiod/device.cpp

[aschenke@…]

Portfile for hplip 0.9.10 (partly-working)

[aschenke@…]

Portfile for hplip 0.9.11

[aschenke@…]

patch for io/hpiod/device.cpp

[aschenke@…]

patch for io/hpiod/device.cpp

[aschenke@…]

hplip Portfile

[aschenke@…]

This new portfile is updated to use the latest version of hplip (1.6.9). By default it will now build without X11 GUI support, so you don't need PyQt and its dependencies, making it much faster to install. There is a gui variant that will build the GUI support as before.

Note that this is still experimental and I haven't really tested this latest version. It is definitely not ready to be committed.

[aschenke@…]

Portfile

[aschenke@…]

Fixed the startupitems.

[simX_other@…]

I managed to get this experimental portfile working, and it finishes the installation. However, when I open up Image Capture to try and scan from my HP PSC 1210 all-in-one printer, it just says that "SANE is in use by another application". I'm pretty sure that this is the correct way to access the scanning services offered by SANE, which in turn uses hplip to access the printer. But I guess it's still not working.

I tried installing the "gui" variant, but got a couple of errors, specifically:

Error: Target com.apple.configure returned: configure failure: shell command " cd "/opt/local/var/db/dports/build/_Users_simx_DarwinPorts_local-sources_print_hplip/work/hplip-1.6.9" && ./configure --prefix=/opt/local --disable-pp-build " returned error 6

and

configure: error: cannot find python-devel support

Error: Status 1 encountered during processing.

Not sure what the deal is there.

I have previously install TWAIN-SANE (information at ​http://www.ellert.se/twain-sane/ ). Not sure if this installation is conflicting with the MacPorts install of SANE and hplip.

Also note that the latest version of hplip is now up to 1.7.4a, while the patchfile specifies version 1.6.9. I'm not sure if the patch supplied in this bug report applies to the latest version anymore. Manually modifying the patchfile to retrieve the latest version of hplip and trying to install it simply results in these errors:

Error: reinplace: couldn't read file "/opt/local/var/db/dports/build/_Users_simx_DarwinPorts_local-sources_print_hplip/work/hplip-1.7.4a/prnt/hpijs/hplip_api.h": no such file or directory
Error: Target com.apple.configure returned: reinplace sed(1) failed
Error: Status 1 encountered during processing.

[jmpp@…]

Milestone New Ports deleted

[toby@…]

closing, this obviously isn't happening

[anonymous]

Milestone Port Submissions deleted

[rich@…]

Cc Me!

[rich@…]

Cc Me!

[rich@…]

Cc Me!

[rich@…]

Any chance of reopening this?

[adrian@…]

Cc Me!

[okmacports@…]

Cc Me!

[okmacports@…]

I have uploaded a new Portfile based on the previous versions that went before. I needed to make some minor changes to the Makefile as well. I believe this now works. I am able to use xsane (Macports version, under X11 or XQuartz) to successfully scan using my PSC 1310.

Note that this is based on a VERY old version of HPLIP, but it has the advantage of working! The current (3.x) version of HPLIP requires DBUS communication. I haven't checked intermediate versions of HPLIP to see if they would also work, but this meets my needs.

[okmacports@…]

working Portfile for hplip-3.10.9

[okmacports@…]

I note that there is a Dbus port, so I tried building the latest HPLIP. There were a few minor problems but nothing too much -- three patches attached. You have to remember to activate Dbus, once for the Daemon and one Agent for each user. Then just fire up xsane under X11 and scan away.

[okmacports@…]

A couple of other points:

1) I didn't try to build the gui version of HPLIP (don't see the point, frankly, but in theory it should work and I left the pointers there if someone wants to try it). 2) One problem with the original effort from several years back was that the Python extensions created by HP were not being installed into the "live" Python directory on the Mac. I have done that via symlinks to avoid the "tree violation" error message in MacPorts. This relies on Python 2.6, however, and would need to be changed if a different Python version were in use. 3) This defaults to a more-or-less complete HPLIP installation (minus the GUI). From what I can tell, it also prints (using CUPS) and makes an All In One printer show up in the Mac printer list. In theory it should be able to be built to fax as well, but I have no way to test it and the fax drivers violated the MacPorts tree structure so I deleted them. 4) This does not use the SANE version created for the Mac, which relies on the SANE project. That project, unhelpfully, does not offer an HPAIO driver because it's "provided by the HPLIP" project, which as we know doesn't do a Mac version. (My guess is that it wouldn't work anyway, because of the Dbus dependency.) As a result, to do your scanning, as mentioned, fire up xsane under X11 (or XQuartz). 5) I'm noting this here in case somebody is searching for the error message:

####################################################################
You will get the following error if you have not properly set up dbus:
Dynamic session lookup supported but failed: launchd did not provide a socket
path, verify that org.freedesktop.dbus-session.plist is loaded!

To repair this, you must launch the dbus daemon systemwide:
sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist 

Then for EACH user who wants access, the user must launch the dbus agent:
launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist 
############################################################################

[rosenjon2@…]

This patch is missing from this port:

​http://launchpadlibrarian.net/60601504/hplip-hpaio-segfault.patch

This causes errors that are as described in the patch.

Replying to okmacports@…:

A couple of other points:

1) I didn't try to build the gui version of HPLIP (don't see the point, frankly, but in theory it should work and I left the pointers there if someone wants to try it). 2) One problem with the original effort from several years back was that the Python extensions created by HP were not being installed into the "live" Python directory on the Mac. I have done that via symlinks to avoid the "tree violation" error message in MacPorts. This relies on Python 2.6, however, and would need to be changed if a different Python version were in use. 3) This defaults to a more-or-less complete HPLIP installation (minus the GUI). From what I can tell, it also prints (using CUPS) and makes an All In One printer show up in the Mac printer list. In theory it should be able to be built to fax as well, but I have no way to test it and the fax drivers violated the MacPorts tree structure so I deleted them. 4) This does not use the SANE version created for the Mac, which relies on the SANE project. That project, unhelpfully, does not offer an HPAIO driver because it's "provided by the HPLIP" project, which as we know doesn't do a Mac version. (My guess is that it wouldn't work anyway, because of the Dbus dependency.) As a result, to do your scanning, as mentioned, fire up xsane under X11 (or XQuartz). 5) I'm noting this here in case somebody is searching for the error message:

####################################################################
You will get the following error if you have not properly set up dbus:
Dynamic session lookup supported but failed: launchd did not provide a socket
path, verify that org.freedesktop.dbus-session.plist is loaded!

To repair this, you must launch the dbus daemon systemwide:
sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist 

Then for EACH user who wants access, the user must launch the dbus agent:
launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist 
############################################################################

[okmacports@…]

This ticket has been superseded by ticket #36001

[okmacports@…]

sorry that's #30061

this ticket should be marked CLOSED