Ticket #24060: gnome-doc-utils-install-log.txt

File gnome-doc-utils-install-log.txt, 94.2 KB (added by chalin@…, 14 years ago)
Line 
1sudo port -d install gnome-doc-utils
2Password:
3DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils
4DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils
5DEBUG: OS Platform: darwin
6DEBUG: OS Version: 10.2.0
7DEBUG: Mac OS X Version: 10.6
8DEBUG: System Arch: i386
9DEBUG: setting option os.universal_supported to yes
10DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
12DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
13DEBUG: 'universal_variant no' specified, so not adding the default universal variant
14DEBUG: Requested variant darwin is not provided by port gnome-doc-utils.
15DEBUG: Requested variant i386 is not provided by port gnome-doc-utils.
16DEBUG: Requested variant macosx is not provided by port gnome-doc-utils.
17DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
18DEBUG: epoch: in tree: 0 installed: 0
19DEBUG: gettext 0.17_4 exists in the ports tree
20DEBUG: gettext 0.17_4  is the latest installed
21DEBUG: gettext 0.17_4  is active
22DEBUG: Merging existing variants  into variants
23DEBUG: new fully merged portvariants:
24DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
25DEBUG: OS Platform: darwin
26DEBUG: OS Version: 10.2.0
27DEBUG: Mac OS X Version: 10.6
28DEBUG: System Arch: i386
29DEBUG: setting option os.universal_supported to yes
30DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
31DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
32DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
33DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
34DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
35DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
36DEBUG: universal variant already exists, so not adding the default one
37DEBUG: Requested variant darwin is not provided by port gettext.
38DEBUG: Requested variant i386 is not provided by port gettext.
39DEBUG: Requested variant macosx is not provided by port gettext.
40DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
41DEBUG: epoch: in tree: 0 installed: 0
42DEBUG: libiconv 1.13.1_0 exists in the ports tree
43DEBUG: libiconv 1.13.1_0  is the latest installed
44DEBUG: libiconv 1.13.1_0  is active
45DEBUG: Merging existing variants  into variants
46DEBUG: new fully merged portvariants:
47DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
48DEBUG: OS Platform: darwin
49DEBUG: OS Version: 10.2.0
50DEBUG: Mac OS X Version: 10.6
51DEBUG: System Arch: i386
52DEBUG: setting option os.universal_supported to yes
53DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
54DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
55DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
56DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
57DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
58DEBUG: universal variant already exists, so not adding the default one
59DEBUG: Requested variant darwin is not provided by port libiconv.
60DEBUG: Requested variant i386 is not provided by port libiconv.
61DEBUG: Requested variant macosx is not provided by port libiconv.
62DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
63DEBUG: epoch: in tree: 0 installed: 0
64DEBUG: gperf 3.0.4_0 exists in the ports tree
65DEBUG: gperf 3.0.4_0  is the latest installed
66DEBUG: gperf 3.0.4_0  is active
67DEBUG: Merging existing variants  into variants
68DEBUG: new fully merged portvariants:
69DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
70DEBUG: OS Platform: darwin
71DEBUG: OS Version: 10.2.0
72DEBUG: Mac OS X Version: 10.6
73DEBUG: System Arch: i386
74DEBUG: setting option os.universal_supported to yes
75DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
76DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
77DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
78DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
79DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
80DEBUG: universal variant already exists, so not adding the default one
81DEBUG: Requested variant darwin is not provided by port gperf.
82DEBUG: Requested variant i386 is not provided by port gperf.
83DEBUG: Requested variant macosx is not provided by port gperf.
84DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
85DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
86DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
87DEBUG: epoch: in tree: 0 installed: 0
88DEBUG: ncurses 5.7_0 exists in the ports tree
89DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
90DEBUG: ncurses 5.7_0 +darwin_10 is active
91DEBUG: Merging existing variants darwin_10 into variants
92DEBUG: new fully merged portvariants:
93DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
94DEBUG: OS Platform: darwin
95DEBUG: OS Version: 10.2.0
96DEBUG: Mac OS X Version: 10.6
97DEBUG: System Arch: i386
98DEBUG: setting option os.universal_supported to yes
99DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
100DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
101DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
102DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
103DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
104DEBUG: universal variant already exists, so not adding the default one
105DEBUG: Requested variant darwin is not provided by port ncurses.
106DEBUG: Requested variant i386 is not provided by port ncurses.
107DEBUG: Requested variant macosx is not provided by port ncurses.
108DEBUG: Executing variant darwin_10 provides darwin_10
109DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
110DEBUG: epoch: in tree: 0 installed: 0
111DEBUG: ncursesw 5.7_0 exists in the ports tree
112DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
113DEBUG: ncursesw 5.7_0 +darwin_10 is active
114DEBUG: Merging existing variants darwin_10 into variants
115DEBUG: new fully merged portvariants:
116DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
117DEBUG: OS Platform: darwin
118DEBUG: OS Version: 10.2.0
119DEBUG: Mac OS X Version: 10.6
120DEBUG: System Arch: i386
121DEBUG: setting option os.universal_supported to yes
122DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
123DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
124DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
125DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
126DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
127DEBUG: universal variant already exists, so not adding the default one
128DEBUG: Requested variant darwin is not provided by port ncursesw.
129DEBUG: Requested variant i386 is not provided by port ncursesw.
130DEBUG: Requested variant macosx is not provided by port ncursesw.
131DEBUG: Executing variant darwin_10 provides darwin_10
132DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
133DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
134DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
135DEBUG: epoch: in tree: 0 installed: 0
136DEBUG: expat 2.0.1_0 exists in the ports tree
137DEBUG: expat 2.0.1_0  is the latest installed
138DEBUG: expat 2.0.1_0  is active
139DEBUG: Merging existing variants  into variants
140DEBUG: new fully merged portvariants:
141DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
142DEBUG: OS Platform: darwin
143DEBUG: OS Version: 10.2.0
144DEBUG: Mac OS X Version: 10.6
145DEBUG: System Arch: i386
146DEBUG: setting option os.universal_supported to yes
147DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
148DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
149DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
150DEBUG: adding the default universal variant
151DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
152DEBUG: Requested variant darwin is not provided by port expat.
153DEBUG: Requested variant i386 is not provided by port expat.
154DEBUG: Requested variant macosx is not provided by port expat.
155DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
156DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
157DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
158DEBUG: epoch: in tree: 0 installed: 0
159DEBUG: libxslt 1.1.26_0 exists in the ports tree
160DEBUG: libxslt 1.1.26_0  is the latest installed
161DEBUG: libxslt 1.1.26_0  is active
162DEBUG: Merging existing variants  into variants
163DEBUG: new fully merged portvariants:
164DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
165DEBUG: OS Platform: darwin
166DEBUG: OS Version: 10.2.0
167DEBUG: Mac OS X Version: 10.6
168DEBUG: System Arch: i386
169DEBUG: setting option os.universal_supported to yes
170DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
171DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
172DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
173DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
174DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
175DEBUG: universal variant already exists, so not adding the default one
176DEBUG: Requested variant darwin is not provided by port libxslt.
177DEBUG: Requested variant i386 is not provided by port libxslt.
178DEBUG: Requested variant macosx is not provided by port libxslt.
179DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
180DEBUG: epoch: in tree: 0 installed: 0
181DEBUG: libxml2 2.7.6_0 exists in the ports tree
182DEBUG: libxml2 2.7.6_0  is the latest installed
183DEBUG: libxml2 2.7.6_0  is active
184DEBUG: Merging existing variants  into variants
185DEBUG: new fully merged portvariants:
186DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
187DEBUG: OS Platform: darwin
188DEBUG: OS Version: 10.2.0
189DEBUG: Mac OS X Version: 10.6
190DEBUG: System Arch: i386
191DEBUG: setting option os.universal_supported to yes
192DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
193DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
194DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
195DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
196DEBUG: adding the default universal variant
197DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
198DEBUG: Requested variant darwin is not provided by port libxml2.
199DEBUG: Requested variant i386 is not provided by port libxml2.
200DEBUG: Requested variant macosx is not provided by port libxml2.
201DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
202DEBUG: epoch: in tree: 0 installed: 0
203DEBUG: zlib 1.2.4_0 exists in the ports tree
204DEBUG: zlib 1.2.4_0  is the latest installed
205DEBUG: zlib 1.2.4_0  is active
206DEBUG: Merging existing variants  into variants
207DEBUG: new fully merged portvariants:
208DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
209DEBUG: OS Platform: darwin
210DEBUG: OS Version: 10.2.0
211DEBUG: Mac OS X Version: 10.6
212DEBUG: System Arch: i386
213DEBUG: setting option os.universal_supported to yes
214DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
215DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
216DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
217DEBUG: adding the default universal variant
218DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
219DEBUG: Requested variant darwin is not provided by port zlib.
220DEBUG: Requested variant i386 is not provided by port zlib.
221DEBUG: Requested variant macosx is not provided by port zlib.
222DEBUG: No need to upgrade! zlib 1.2.4_0 >= zlib 1.2.4_0
223DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
224DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
225DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
226DEBUG: epoch: in tree: 0 installed: 0
227DEBUG: python26 2.6.4_0 exists in the ports tree
228DEBUG: python26 2.6.4_0 +darwin is the latest installed
229DEBUG: python26 2.6.4_0 +darwin is active
230DEBUG: Merging existing variants darwin into variants
231DEBUG: new fully merged portvariants:
232DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
233DEBUG: OS Platform: darwin
234DEBUG: OS Version: 10.2.0
235DEBUG: Mac OS X Version: 10.6
236DEBUG: System Arch: i386
237DEBUG: setting option os.universal_supported to yes
238DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
239DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
240DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
241DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
242DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
243DEBUG: universal variant already exists, so not adding the default one
244DEBUG: Requested variant i386 is not provided by port python26.
245DEBUG: Requested variant macosx is not provided by port python26.
246DEBUG: Executing variant darwin provides darwin
247DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
248DEBUG: epoch: in tree: 1 installed: 1
249DEBUG: openssl 0.9.8m_0 exists in the ports tree
250DEBUG: openssl 0.9.8m_0 +darwin is the latest installed
251DEBUG: openssl 0.9.8m_0 +darwin is active
252DEBUG: Merging existing variants darwin into variants
253DEBUG: new fully merged portvariants:
254DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
255DEBUG: OS Platform: darwin
256DEBUG: OS Version: 10.2.0
257DEBUG: Mac OS X Version: 10.6
258DEBUG: System Arch: i386
259DEBUG: setting option os.universal_supported to yes
260DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
261DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
262DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
263DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
264DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
265DEBUG: universal variant already exists, so not adding the default one
266DEBUG: Requested variant i386 is not provided by port openssl.
267DEBUG: Requested variant macosx is not provided by port openssl.
268DEBUG: Executing variant darwin provides darwin
269DEBUG: No need to upgrade! openssl 0.9.8m_0 >= openssl 0.9.8m_0
270DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
271DEBUG: epoch: in tree: 0 installed: 0
272DEBUG: tk 8.5.8_0 exists in the ports tree
273DEBUG: tk 8.5.8_0 +darwin is the latest installed
274DEBUG: tk 8.5.8_0 +darwin is active
275DEBUG: Merging existing variants darwin into variants
276DEBUG: new fully merged portvariants:
277DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
278DEBUG: OS Platform: darwin
279DEBUG: OS Version: 10.2.0
280DEBUG: Mac OS X Version: 10.6
281DEBUG: System Arch: i386
282DEBUG: setting option os.universal_supported to yes
283DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
284DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
285DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
286DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
287DEBUG: adding the default universal variant
288DEBUG: Requested variant i386 is not provided by port tk.
289DEBUG: Requested variant macosx is not provided by port tk.
290DEBUG: Executing variant darwin provides darwin
291DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
292DEBUG: epoch: in tree: 0 installed: 0
293DEBUG: pkgconfig 0.23_1 exists in the ports tree
294DEBUG: pkgconfig 0.23_1  is the latest installed
295DEBUG: pkgconfig 0.23_1  is active
296DEBUG: Merging existing variants  into variants
297DEBUG: new fully merged portvariants:
298DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
299DEBUG: OS Platform: darwin
300DEBUG: OS Version: 10.2.0
301DEBUG: Mac OS X Version: 10.6
302DEBUG: System Arch: i386
303DEBUG: setting option os.universal_supported to yes
304DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
305DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
306DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
307DEBUG: adding the default universal variant
308DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
309DEBUG: Requested variant darwin is not provided by port pkgconfig.
310DEBUG: Requested variant i386 is not provided by port pkgconfig.
311DEBUG: Requested variant macosx is not provided by port pkgconfig.
312DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
313DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
314DEBUG: epoch: in tree: 0 installed: 0
315DEBUG: tcl 8.5.8_0 exists in the ports tree
316DEBUG: tcl 8.5.8_0 +darwin is the latest installed
317DEBUG: tcl 8.5.8_0 +darwin is active
318DEBUG: Merging existing variants darwin into variants
319DEBUG: new fully merged portvariants:
320DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
321DEBUG: OS Platform: darwin
322DEBUG: OS Version: 10.2.0
323DEBUG: Mac OS X Version: 10.6
324DEBUG: System Arch: i386
325DEBUG: setting option os.universal_supported to yes
326DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
327DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
328DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
329DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
330DEBUG: adding the default universal variant
331DEBUG: Requested variant i386 is not provided by port tcl.
332DEBUG: Requested variant macosx is not provided by port tcl.
333DEBUG: Executing variant darwin provides darwin
334DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
335DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
336DEBUG: epoch: in tree: 0 installed: 0
337DEBUG: Xft2 2.1.14_0 exists in the ports tree
338DEBUG: Xft2 2.1.14_0  is the latest installed
339DEBUG: Xft2 2.1.14_0  is active
340DEBUG: Merging existing variants  into variants
341DEBUG: new fully merged portvariants:
342DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
343DEBUG: OS Platform: darwin
344DEBUG: OS Version: 10.2.0
345DEBUG: Mac OS X Version: 10.6
346DEBUG: System Arch: i386
347DEBUG: setting option os.universal_supported to yes
348DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
349DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
350DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
351DEBUG: adding the default universal variant
352DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
353DEBUG: Requested variant darwin is not provided by port Xft2.
354DEBUG: Requested variant i386 is not provided by port Xft2.
355DEBUG: Requested variant macosx is not provided by port Xft2.
356DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
357DEBUG: epoch: in tree: 0 installed: 0
358DEBUG: xrender 0.9.5_0 exists in the ports tree
359DEBUG: xrender 0.9.5_0  is the latest installed
360DEBUG: xrender 0.9.5_0  is active
361DEBUG: Merging existing variants  into variants
362DEBUG: new fully merged portvariants:
363DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
364DEBUG: OS Platform: darwin
365DEBUG: OS Version: 10.2.0
366DEBUG: Mac OS X Version: 10.6
367DEBUG: System Arch: i386
368DEBUG: setting option os.universal_supported to yes
369DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
370DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
371DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
372DEBUG: adding the default universal variant
373DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
374DEBUG: Requested variant darwin is not provided by port xrender.
375DEBUG: Requested variant i386 is not provided by port xrender.
376DEBUG: Requested variant macosx is not provided by port xrender.
377DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
378DEBUG: epoch: in tree: 0 installed: 0
379DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
380DEBUG: xorg-libX11 1.3.3_0  is the latest installed
381DEBUG: xorg-libX11 1.3.3_0  is active
382DEBUG: Merging existing variants  into variants
383DEBUG: new fully merged portvariants:
384DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
385DEBUG: OS Platform: darwin
386DEBUG: OS Version: 10.2.0
387DEBUG: Mac OS X Version: 10.6
388DEBUG: System Arch: i386
389DEBUG: setting option os.universal_supported to yes
390DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
391DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
392DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
393DEBUG: adding the default universal variant
394DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
395DEBUG: Requested variant darwin is not provided by port xorg-libX11.
396DEBUG: Requested variant i386 is not provided by port xorg-libX11.
397DEBUG: Requested variant macosx is not provided by port xorg-libX11.
398DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
399DEBUG: epoch: in tree: 0 installed: 0
400DEBUG: xorg-util-macros 1.6.1_0 exists in the ports tree
401DEBUG: xorg-util-macros 1.6.1_0  is the latest installed
402DEBUG: xorg-util-macros 1.6.1_0  is active
403DEBUG: Merging existing variants  into variants
404DEBUG: new fully merged portvariants:
405DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
406DEBUG: OS Platform: darwin
407DEBUG: OS Version: 10.2.0
408DEBUG: Mac OS X Version: 10.6
409DEBUG: System Arch: i386
410DEBUG: setting option os.universal_supported to yes
411DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
412DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
413DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
414DEBUG: 'universal_variant no' specified, so not adding the default universal variant
415DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
416DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
417DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
418DEBUG: No need to upgrade! xorg-util-macros 1.6.1_0 >= xorg-util-macros 1.6.1_0
419DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
420DEBUG: epoch: in tree: 0 installed: 0
421DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
422DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
423DEBUG: xorg-xtrans 1.2.5_0  is active
424DEBUG: Merging existing variants  into variants
425DEBUG: new fully merged portvariants:
426DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
427DEBUG: OS Platform: darwin
428DEBUG: OS Version: 10.2.0
429DEBUG: Mac OS X Version: 10.6
430DEBUG: System Arch: i386
431DEBUG: setting option os.universal_supported to yes
432DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
433DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
434DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
435DEBUG: 'universal_variant no' specified, so not adding the default universal variant
436DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
437DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
438DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
439DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
440DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
441DEBUG: epoch: in tree: 0 installed: 0
442DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
443DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
444DEBUG: xorg-bigreqsproto 1.1.0_0  is active
445DEBUG: Merging existing variants  into variants
446DEBUG: new fully merged portvariants:
447DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
448DEBUG: OS Platform: darwin
449DEBUG: OS Version: 10.2.0
450DEBUG: Mac OS X Version: 10.6
451DEBUG: System Arch: i386
452DEBUG: setting option os.universal_supported to yes
453DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
454DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
455DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
456DEBUG: 'universal_variant no' specified, so not adding the default universal variant
457DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
458DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
459DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
460DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
461DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
462DEBUG: epoch: in tree: 0 installed: 0
463DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
464DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
465DEBUG: xorg-xcmiscproto 1.2.0_0  is active
466DEBUG: Merging existing variants  into variants
467DEBUG: new fully merged portvariants:
468DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
469DEBUG: OS Platform: darwin
470DEBUG: OS Version: 10.2.0
471DEBUG: Mac OS X Version: 10.6
472DEBUG: System Arch: i386
473DEBUG: setting option os.universal_supported to yes
474DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
475DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
476DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
477DEBUG: 'universal_variant no' specified, so not adding the default universal variant
478DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
479DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
480DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
481DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
482DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
483DEBUG: epoch: in tree: 0 installed: 0
484DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
485DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
486DEBUG: xorg-xextproto 7.1.1_0  is active
487DEBUG: Merging existing variants  into variants
488DEBUG: new fully merged portvariants:
489DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
490DEBUG: OS Platform: darwin
491DEBUG: OS Version: 10.2.0
492DEBUG: Mac OS X Version: 10.6
493DEBUG: System Arch: i386
494DEBUG: setting option os.universal_supported to yes
495DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
496DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
497DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
498DEBUG: 'universal_variant no' specified, so not adding the default universal variant
499DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
500DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
501DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
502DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
503DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
504DEBUG: epoch: in tree: 0 installed: 0
505DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
506DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
507DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
508DEBUG: Merging existing variants  into variants
509DEBUG: new fully merged portvariants:
510DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
511DEBUG: OS Platform: darwin
512DEBUG: OS Version: 10.2.0
513DEBUG: Mac OS X Version: 10.6
514DEBUG: System Arch: i386
515DEBUG: setting option os.universal_supported to yes
516DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
517DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
518DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
519DEBUG: 'universal_variant no' specified, so not adding the default universal variant
520DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
521DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
522DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
523DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
524DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
525DEBUG: epoch: in tree: 0 installed: 0
526DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
527DEBUG: xorg-inputproto 2.0_0  is the latest installed
528DEBUG: xorg-inputproto 2.0_0  is active
529DEBUG: Merging existing variants  into variants
530DEBUG: new fully merged portvariants:
531DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
532DEBUG: OS Platform: darwin
533DEBUG: OS Version: 10.2.0
534DEBUG: Mac OS X Version: 10.6
535DEBUG: System Arch: i386
536DEBUG: setting option os.universal_supported to yes
537DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
538DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
539DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
540DEBUG: 'universal_variant no' specified, so not adding the default universal variant
541DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
542DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
543DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
544DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
545DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
546DEBUG: epoch: in tree: 0 installed: 0
547DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
548DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
549DEBUG: xorg-libXdmcp 1.0.3_0  is active
550DEBUG: Merging existing variants  into variants
551DEBUG: new fully merged portvariants:
552DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
553DEBUG: OS Platform: darwin
554DEBUG: OS Version: 10.2.0
555DEBUG: Mac OS X Version: 10.6
556DEBUG: System Arch: i386
557DEBUG: setting option os.universal_supported to yes
558DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
559DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
560DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
561DEBUG: adding the default universal variant
562DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
563DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
564DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
565DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
566DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
567DEBUG: epoch: in tree: 0 installed: 0
568DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
569DEBUG: xorg-xproto 7.0.16_0  is the latest installed
570DEBUG: xorg-xproto 7.0.16_0  is active
571DEBUG: Merging existing variants  into variants
572DEBUG: new fully merged portvariants:
573DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
574DEBUG: OS Platform: darwin
575DEBUG: OS Version: 10.2.0
576DEBUG: Mac OS X Version: 10.6
577DEBUG: System Arch: i386
578DEBUG: setting option os.universal_supported to yes
579DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
580DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
581DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
582DEBUG: 'universal_variant no' specified, so not adding the default universal variant
583DEBUG: Requested variant darwin is not provided by port xorg-xproto.
584DEBUG: Requested variant i386 is not provided by port xorg-xproto.
585DEBUG: Requested variant macosx is not provided by port xorg-xproto.
586DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
587DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
588DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
589DEBUG: epoch: in tree: 0 installed: 0
590DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
591DEBUG: xorg-libXau 1.0.5_0  is the latest installed
592DEBUG: xorg-libXau 1.0.5_0  is active
593DEBUG: Merging existing variants  into variants
594DEBUG: new fully merged portvariants:
595DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
596DEBUG: OS Platform: darwin
597DEBUG: OS Version: 10.2.0
598DEBUG: Mac OS X Version: 10.6
599DEBUG: System Arch: i386
600DEBUG: setting option os.universal_supported to yes
601DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
602DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
603DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
604DEBUG: adding the default universal variant
605DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
606DEBUG: Requested variant darwin is not provided by port xorg-libXau.
607DEBUG: Requested variant i386 is not provided by port xorg-libXau.
608DEBUG: Requested variant macosx is not provided by port xorg-libXau.
609DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
610DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
611DEBUG: epoch: in tree: 0 installed: 0
612DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
613DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
614DEBUG: xorg-kbproto 1.0.4_0  is active
615DEBUG: Merging existing variants  into variants
616DEBUG: new fully merged portvariants:
617DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
618DEBUG: OS Platform: darwin
619DEBUG: OS Version: 10.2.0
620DEBUG: Mac OS X Version: 10.6
621DEBUG: System Arch: i386
622DEBUG: setting option os.universal_supported to yes
623DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
624DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
625DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
626DEBUG: 'universal_variant no' specified, so not adding the default universal variant
627DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
628DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
629DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
630DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
631DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
632DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
633DEBUG: epoch: in tree: 0 installed: 0
634DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
635DEBUG: xorg-renderproto 0.11_0  is the latest installed
636DEBUG: xorg-renderproto 0.11_0  is active
637DEBUG: Merging existing variants  into variants
638DEBUG: new fully merged portvariants:
639DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
640DEBUG: OS Platform: darwin
641DEBUG: OS Version: 10.2.0
642DEBUG: Mac OS X Version: 10.6
643DEBUG: System Arch: i386
644DEBUG: setting option os.universal_supported to yes
645DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
646DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
647DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
648DEBUG: 'universal_variant no' specified, so not adding the default universal variant
649DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
650DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
651DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
652DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
653DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
654DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
655DEBUG: epoch: in tree: 0 installed: 0
656DEBUG: freetype 2.3.12_0 exists in the ports tree
657DEBUG: freetype 2.3.12_0 +macosx is the latest installed
658DEBUG: freetype 2.3.12_0 +macosx is active
659DEBUG: Merging existing variants macosx into variants
660DEBUG: new fully merged portvariants:
661DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
662DEBUG: OS Platform: darwin
663DEBUG: OS Version: 10.2.0
664DEBUG: Mac OS X Version: 10.6
665DEBUG: System Arch: i386
666DEBUG: setting option os.universal_supported to yes
667DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
668DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
669DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
670DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
671DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
672DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
673DEBUG: universal variant already exists, so not adding the default one
674DEBUG: Requested variant darwin is not provided by port freetype.
675DEBUG: Requested variant i386 is not provided by port freetype.
676DEBUG: Executing variant macosx provides macosx
677DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
678DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
679DEBUG: epoch: in tree: 0 installed: 0
680DEBUG: fontconfig 2.8.0_0 exists in the ports tree
681DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
682DEBUG: fontconfig 2.8.0_0 +macosx is active
683DEBUG: Merging existing variants macosx into variants
684DEBUG: new fully merged portvariants:
685DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
686DEBUG: OS Platform: darwin
687DEBUG: OS Version: 10.2.0
688DEBUG: Mac OS X Version: 10.6
689DEBUG: System Arch: i386
690DEBUG: setting option os.universal_supported to yes
691DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
692DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
693DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
694DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
695DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
696DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
697DEBUG: universal variant already exists, so not adding the default one
698DEBUG: Requested variant darwin is not provided by port fontconfig.
699DEBUG: Requested variant i386 is not provided by port fontconfig.
700DEBUG: Executing variant macosx provides macosx
701DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
702DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
703DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
704DEBUG: epoch: in tree: 0 installed: 0
705DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
706DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
707DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
708DEBUG: Merging existing variants  into variants
709DEBUG: new fully merged portvariants:
710DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
711DEBUG: OS Platform: darwin
712DEBUG: OS Version: 10.2.0
713DEBUG: Mac OS X Version: 10.6
714DEBUG: System Arch: i386
715DEBUG: setting option os.universal_supported to yes
716DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
717DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
718DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
719DEBUG: adding the default universal variant
720DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
721DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
722DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
723DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
724DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
725DEBUG: epoch: in tree: 0 installed: 0
726DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
727DEBUG: xorg-libXext 1.1.1_0  is the latest installed
728DEBUG: xorg-libXext 1.1.1_0  is active
729DEBUG: Merging existing variants  into variants
730DEBUG: new fully merged portvariants:
731DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
732DEBUG: OS Platform: darwin
733DEBUG: OS Version: 10.2.0
734DEBUG: Mac OS X Version: 10.6
735DEBUG: System Arch: i386
736DEBUG: setting option os.universal_supported to yes
737DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
738DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
739DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
740DEBUG: adding the default universal variant
741DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
742DEBUG: Requested variant darwin is not provided by port xorg-libXext.
743DEBUG: Requested variant i386 is not provided by port xorg-libXext.
744DEBUG: Requested variant macosx is not provided by port xorg-libXext.
745DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
746DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
747DEBUG: epoch: in tree: 0 installed: 0
748DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
749DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
750DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
751DEBUG: Merging existing variants  into variants
752DEBUG: new fully merged portvariants:
753DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
754DEBUG: OS Platform: darwin
755DEBUG: OS Version: 10.2.0
756DEBUG: Mac OS X Version: 10.6
757DEBUG: System Arch: i386
758DEBUG: setting option os.universal_supported to yes
759DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
760DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
761DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
762DEBUG: 'universal_variant no' specified, so not adding the default universal variant
763DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
764DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
765DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
766DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
767DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
768DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
769DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
770DEBUG: epoch: in tree: 0 installed: 0
771DEBUG: sqlite3 3.6.23_0 exists in the ports tree
772DEBUG: sqlite3 3.6.23_0  is the latest installed
773DEBUG: sqlite3 3.6.23_0  is active
774DEBUG: Merging existing variants  into variants
775DEBUG: new fully merged portvariants:
776DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
777DEBUG: OS Platform: darwin
778DEBUG: OS Version: 10.2.0
779DEBUG: Mac OS X Version: 10.6
780DEBUG: System Arch: i386
781DEBUG: setting option os.universal_supported to yes
782DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
783DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
784DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
785DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
786DEBUG: adding the default universal variant
787DEBUG: Requested variant darwin is not provided by port sqlite3.
788DEBUG: Requested variant i386 is not provided by port sqlite3.
789DEBUG: Requested variant macosx is not provided by port sqlite3.
790DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
791DEBUG: epoch: in tree: 0 installed: 0
792DEBUG: readline 6.1.000_1 exists in the ports tree
793DEBUG: readline 6.1.000_1 +darwin is the latest installed
794DEBUG: readline 6.1.000_1 +darwin is active
795DEBUG: Merging existing variants darwin into variants
796DEBUG: new fully merged portvariants:
797DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
798DEBUG: OS Platform: darwin
799DEBUG: OS Version: 10.2.0
800DEBUG: Mac OS X Version: 10.6
801DEBUG: System Arch: i386
802DEBUG: setting option os.universal_supported to yes
803DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
804DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
805DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
806DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
807DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
808DEBUG: universal variant already exists, so not adding the default one
809DEBUG: Requested variant i386 is not provided by port readline.
810DEBUG: Requested variant macosx is not provided by port readline.
811DEBUG: Executing variant darwin provides darwin
812DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
813DEBUG: No need to upgrade! sqlite3 3.6.23_0 >= sqlite3 3.6.23_0
814DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
815DEBUG: epoch: in tree: 0 installed: 0
816DEBUG: db46 4.6.21_6 exists in the ports tree
817DEBUG: db46 4.6.21_6  is the latest installed
818DEBUG: db46 4.6.21_6  is active
819DEBUG: Merging existing variants  into variants
820DEBUG: new fully merged portvariants:
821DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
822DEBUG: OS Platform: darwin
823DEBUG: OS Version: 10.2.0
824DEBUG: Mac OS X Version: 10.6
825DEBUG: System Arch: i386
826DEBUG: setting option os.universal_supported to yes
827DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
828DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
829DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
830DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
831DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
832DEBUG: universal variant already exists, so not adding the default one
833DEBUG: Requested variant darwin is not provided by port db46.
834DEBUG: Requested variant i386 is not provided by port db46.
835DEBUG: Requested variant macosx is not provided by port db46.
836DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
837DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
838DEBUG: epoch: in tree: 0 installed: 0
839DEBUG: gdbm 1.8.3_2 exists in the ports tree
840DEBUG: gdbm 1.8.3_2  is the latest installed
841DEBUG: gdbm 1.8.3_2  is active
842DEBUG: Merging existing variants  into variants
843DEBUG: new fully merged portvariants:
844DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
845DEBUG: OS Platform: darwin
846DEBUG: OS Version: 10.2.0
847DEBUG: Mac OS X Version: 10.6
848DEBUG: System Arch: i386
849DEBUG: setting option os.universal_supported to yes
850DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
851DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
852DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
853DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
854DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
855DEBUG: universal variant already exists, so not adding the default one
856DEBUG: Requested variant darwin is not provided by port gdbm.
857DEBUG: Requested variant i386 is not provided by port gdbm.
858DEBUG: Requested variant macosx is not provided by port gdbm.
859DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
860DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
861DEBUG: epoch: in tree: 0 installed: 0
862DEBUG: bzip2 1.0.5_3 exists in the ports tree
863DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
864DEBUG: bzip2 1.0.5_3 +darwin is active
865DEBUG: Merging existing variants darwin into variants
866DEBUG: new fully merged portvariants:
867DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
868DEBUG: OS Platform: darwin
869DEBUG: OS Version: 10.2.0
870DEBUG: Mac OS X Version: 10.6
871DEBUG: System Arch: i386
872DEBUG: setting option os.universal_supported to yes
873DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
874DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
875DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
876DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
877DEBUG: universal variant already exists, so not adding the default one
878DEBUG: Requested variant i386 is not provided by port bzip2.
879DEBUG: Requested variant macosx is not provided by port bzip2.
880DEBUG: Executing variant darwin provides darwin
881DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
882DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0
883DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
884DEBUG: epoch: in tree: 0 installed: 0
885DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
886DEBUG: p5-xml-parser 2.36_0  is the latest installed
887DEBUG: p5-xml-parser 2.36_0  is active
888DEBUG: Merging existing variants  into variants
889DEBUG: new fully merged portvariants:
890DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
891DEBUG: OS Platform: darwin
892DEBUG: OS Version: 10.2.0
893DEBUG: Mac OS X Version: 10.6
894DEBUG: System Arch: i386
895DEBUG: setting option os.universal_supported to yes
896DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
897DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
898DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
899DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
900DEBUG: 'universal_variant no' specified, so not adding the default universal variant
901DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
902DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
903DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
904DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
905DEBUG: epoch: in tree: 0 installed: 0
906DEBUG: perl5 5.8.9_0 exists in the ports tree
907DEBUG: perl5 5.8.9_0  is the latest installed
908DEBUG: perl5 5.8.9_0  is active
909DEBUG: Merging existing variants  into variants
910DEBUG: new fully merged portvariants:
911DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
912DEBUG: OS Platform: darwin
913DEBUG: OS Version: 10.2.0
914DEBUG: Mac OS X Version: 10.6
915DEBUG: System Arch: i386
916DEBUG: setting option os.universal_supported to yes
917DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
918DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
919DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
920DEBUG: 'universal_variant no' specified, so not adding the default universal variant
921DEBUG: Requested variant darwin is not provided by port perl5.
922DEBUG: Requested variant i386 is not provided by port perl5.
923DEBUG: Requested variant macosx is not provided by port perl5.
924DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
925DEBUG: epoch: in tree: 0 installed: 0
926DEBUG: perl5.8 5.8.9_3 exists in the ports tree
927DEBUG: perl5.8 5.8.9_3  is the latest installed
928DEBUG: perl5.8 5.8.9_3  is active
929DEBUG: Merging existing variants  into variants
930DEBUG: new fully merged portvariants:
931DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
932DEBUG: OS Platform: darwin
933DEBUG: OS Version: 10.2.0
934DEBUG: Mac OS X Version: 10.6
935DEBUG: System Arch: i386
936DEBUG: setting option os.universal_supported to yes
937DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
938DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
939DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
940DEBUG: adding the default universal variant
941DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
942DEBUG: Requested variant darwin is not provided by port perl5.8.
943DEBUG: Requested variant i386 is not provided by port perl5.8.
944DEBUG: Requested variant macosx is not provided by port perl5.8.
945DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
946DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
947DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
948DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
949DEBUG: epoch: in tree: 0 installed: 0
950DEBUG: docbook-xml 5.0_0 exists in the ports tree
951DEBUG: docbook-xml 5.0_0  is the latest installed
952DEBUG: docbook-xml 5.0_0  is active
953DEBUG: Merging existing variants  into variants
954DEBUG: new fully merged portvariants:
955DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
956DEBUG: OS Platform: darwin
957DEBUG: OS Version: 10.2.0
958DEBUG: Mac OS X Version: 10.6
959DEBUG: System Arch: i386
960DEBUG: setting option os.universal_supported to yes
961DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
962DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
963DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
964DEBUG: 'universal_variant no' specified, so not adding the default universal variant
965DEBUG: Requested variant darwin is not provided by port docbook-xml.
966DEBUG: Requested variant i386 is not provided by port docbook-xml.
967DEBUG: Requested variant macosx is not provided by port docbook-xml.
968DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2
969DEBUG: epoch: in tree: 0 installed: 0
970DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
971DEBUG: docbook-xml-4.1.2 4.1.2_1  is the latest installed
972DEBUG: docbook-xml-4.1.2 4.1.2_1  is active
973DEBUG: Merging existing variants  into variants
974DEBUG: new fully merged portvariants:
975DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2
976DEBUG: OS Platform: darwin
977DEBUG: OS Version: 10.2.0
978DEBUG: Mac OS X Version: 10.6
979DEBUG: System Arch: i386
980DEBUG: setting option os.universal_supported to yes
981DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
982DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
983DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
984DEBUG: not using configure, so not adding the default universal variant
985DEBUG: Requested variant darwin is not provided by port docbook-xml-4.1.2.
986DEBUG: Requested variant i386 is not provided by port docbook-xml-4.1.2.
987DEBUG: Requested variant macosx is not provided by port docbook-xml-4.1.2.
988DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
989DEBUG: unzip is *not* installed by MacPorts
990DEBUG: Searching for dependency: unzip
991DEBUG: Didn't find receipt, going to depspec regex for: unzip
992DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
993DEBUG: unzip not installed, soft dependency satisfied
994DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
995DEBUG: epoch: in tree: 0 installed: 0
996DEBUG: xmlcatmgr 2.2_1 exists in the ports tree
997DEBUG: xmlcatmgr 2.2_1  is the latest installed
998DEBUG: xmlcatmgr 2.2_1  is active
999DEBUG: Merging existing variants  into variants
1000DEBUG: new fully merged portvariants:
1001DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
1002DEBUG: OS Platform: darwin
1003DEBUG: OS Version: 10.2.0
1004DEBUG: Mac OS X Version: 10.6
1005DEBUG: System Arch: i386
1006DEBUG: setting option os.universal_supported to yes
1007DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1008DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1009DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1010DEBUG: adding the default universal variant
1011DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1012DEBUG: Requested variant darwin is not provided by port xmlcatmgr.
1013DEBUG: Requested variant i386 is not provided by port xmlcatmgr.
1014DEBUG: Requested variant macosx is not provided by port xmlcatmgr.
1015DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
1016DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1
1017DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2
1018DEBUG: epoch: in tree: 0 installed: 0
1019DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree
1020DEBUG: docbook-xml-4.2 4.2_0  is the latest installed
1021DEBUG: docbook-xml-4.2 4.2_0  is active
1022DEBUG: Merging existing variants  into variants
1023DEBUG: new fully merged portvariants:
1024DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2
1025DEBUG: OS Platform: darwin
1026DEBUG: OS Version: 10.2.0
1027DEBUG: Mac OS X Version: 10.6
1028DEBUG: System Arch: i386
1029DEBUG: setting option os.universal_supported to yes
1030DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1031DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1032DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1033DEBUG: not using configure, so not adding the default universal variant
1034DEBUG: Requested variant darwin is not provided by port docbook-xml-4.2.
1035DEBUG: Requested variant i386 is not provided by port docbook-xml-4.2.
1036DEBUG: Requested variant macosx is not provided by port docbook-xml-4.2.
1037DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0
1038DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3
1039DEBUG: epoch: in tree: 0 installed: 0
1040DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree
1041DEBUG: docbook-xml-4.3 4.3_0  is the latest installed
1042DEBUG: docbook-xml-4.3 4.3_0  is active
1043DEBUG: Merging existing variants  into variants
1044DEBUG: new fully merged portvariants:
1045DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3
1046DEBUG: OS Platform: darwin
1047DEBUG: OS Version: 10.2.0
1048DEBUG: Mac OS X Version: 10.6
1049DEBUG: System Arch: i386
1050DEBUG: setting option os.universal_supported to yes
1051DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1052DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1053DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1054DEBUG: not using configure, so not adding the default universal variant
1055DEBUG: Requested variant darwin is not provided by port docbook-xml-4.3.
1056DEBUG: Requested variant i386 is not provided by port docbook-xml-4.3.
1057DEBUG: Requested variant macosx is not provided by port docbook-xml-4.3.
1058DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0
1059DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4
1060DEBUG: epoch: in tree: 0 installed: 0
1061DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree
1062DEBUG: docbook-xml-4.4 4.4_0  is the latest installed
1063DEBUG: docbook-xml-4.4 4.4_0  is active
1064DEBUG: Merging existing variants  into variants
1065DEBUG: new fully merged portvariants:
1066DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4
1067DEBUG: OS Platform: darwin
1068DEBUG: OS Version: 10.2.0
1069DEBUG: Mac OS X Version: 10.6
1070DEBUG: System Arch: i386
1071DEBUG: setting option os.universal_supported to yes
1072DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1073DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1074DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1075DEBUG: not using configure, so not adding the default universal variant
1076DEBUG: Requested variant darwin is not provided by port docbook-xml-4.4.
1077DEBUG: Requested variant i386 is not provided by port docbook-xml-4.4.
1078DEBUG: Requested variant macosx is not provided by port docbook-xml-4.4.
1079DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0
1080DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5
1081DEBUG: epoch: in tree: 0 installed: 0
1082DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree
1083DEBUG: docbook-xml-4.5 4.5_0  is the latest installed
1084DEBUG: docbook-xml-4.5 4.5_0  is active
1085DEBUG: Merging existing variants  into variants
1086DEBUG: new fully merged portvariants:
1087DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5
1088DEBUG: OS Platform: darwin
1089DEBUG: OS Version: 10.2.0
1090DEBUG: Mac OS X Version: 10.6
1091DEBUG: System Arch: i386
1092DEBUG: setting option os.universal_supported to yes
1093DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1094DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1095DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1096DEBUG: not using configure, so not adding the default universal variant
1097DEBUG: Requested variant darwin is not provided by port docbook-xml-4.5.
1098DEBUG: Requested variant i386 is not provided by port docbook-xml-4.5.
1099DEBUG: Requested variant macosx is not provided by port docbook-xml-4.5.
1100DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0
1101DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0
1102DEBUG: epoch: in tree: 0 installed: 0
1103DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree
1104DEBUG: docbook-xml-5.0 5.0_0  is the latest installed
1105DEBUG: docbook-xml-5.0 5.0_0  is active
1106DEBUG: Merging existing variants  into variants
1107DEBUG: new fully merged portvariants:
1108DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0
1109DEBUG: OS Platform: darwin
1110DEBUG: OS Version: 10.2.0
1111DEBUG: Mac OS X Version: 10.6
1112DEBUG: System Arch: i386
1113DEBUG: setting option os.universal_supported to yes
1114DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1115DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1116DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1117DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1118DEBUG: Requested variant darwin is not provided by port docbook-xml-5.0.
1119DEBUG: Requested variant i386 is not provided by port docbook-xml-5.0.
1120DEBUG: Requested variant macosx is not provided by port docbook-xml-5.0.
1121DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0
1122DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
1123DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
1124DEBUG: epoch: in tree: 0 installed: 0
1125DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree
1126DEBUG: docbook-xsl 1.75.2_0  is the latest installed
1127DEBUG: docbook-xsl 1.75.2_0  is active
1128DEBUG: Merging existing variants  into variants
1129DEBUG: new fully merged portvariants:
1130DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
1131DEBUG: OS Platform: darwin
1132DEBUG: OS Version: 10.2.0
1133DEBUG: Mac OS X Version: 10.6
1134DEBUG: System Arch: i386
1135DEBUG: setting option os.universal_supported to yes
1136DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1137DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1138DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1139DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1140DEBUG: Requested variant darwin is not provided by port docbook-xsl.
1141DEBUG: Requested variant i386 is not provided by port docbook-xsl.
1142DEBUG: Requested variant macosx is not provided by port docbook-xsl.
1143DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0
1144DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
1145DEBUG: epoch: in tree: 0 installed: 0
1146DEBUG: rarian 0.8.1_0 exists in the ports tree
1147DEBUG: rarian 0.8.1_0  is the latest installed
1148DEBUG: rarian 0.8.1_0  is active
1149DEBUG: Merging existing variants  into variants
1150DEBUG: new fully merged portvariants:
1151DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
1152DEBUG: OS Platform: darwin
1153DEBUG: OS Version: 10.2.0
1154DEBUG: Mac OS X Version: 10.6
1155DEBUG: System Arch: i386
1156DEBUG: setting option os.universal_supported to yes
1157DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1158DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1159DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1160DEBUG: adding the default universal variant
1161DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1162DEBUG: Requested variant darwin is not provided by port rarian.
1163DEBUG: Requested variant i386 is not provided by port rarian.
1164DEBUG: Requested variant macosx is not provided by port rarian.
1165DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
1166DEBUG: epoch: in tree: 0 installed: 0
1167DEBUG: intltool 0.40.6_0 exists in the ports tree
1168DEBUG: intltool 0.40.6_0  is the latest installed
1169DEBUG: intltool 0.40.6_0  is active
1170DEBUG: Merging existing variants  into variants
1171DEBUG: new fully merged portvariants:
1172DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
1173DEBUG: OS Platform: darwin
1174DEBUG: OS Version: 10.2.0
1175DEBUG: Mac OS X Version: 10.6
1176DEBUG: System Arch: i386
1177DEBUG: setting option os.universal_supported to yes
1178DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1179DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1180DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1181DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1182DEBUG: Requested variant darwin is not provided by port intltool.
1183DEBUG: Requested variant i386 is not provided by port intltool.
1184DEBUG: Requested variant macosx is not provided by port intltool.
1185DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common
1186DEBUG: epoch: in tree: 0 installed: 0
1187DEBUG: gnome-common 2.26.0_0 exists in the ports tree
1188DEBUG: gnome-common 2.26.0_0  is the latest installed
1189DEBUG: gnome-common 2.26.0_0  is active
1190DEBUG: Merging existing variants  into variants
1191DEBUG: new fully merged portvariants:
1192DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common
1193DEBUG: OS Platform: darwin
1194DEBUG: OS Version: 10.2.0
1195DEBUG: Mac OS X Version: 10.6
1196DEBUG: System Arch: i386
1197DEBUG: setting option os.universal_supported to yes
1198DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1199DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1200DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1201DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1202DEBUG: Requested variant darwin is not provided by port gnome-common.
1203DEBUG: Requested variant i386 is not provided by port gnome-common.
1204DEBUG: Requested variant macosx is not provided by port gnome-common.
1205DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0
1206DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long
1207DEBUG: epoch: in tree: 0 installed: 0
1208DEBUG: p5-getopt-long 2.38_0 exists in the ports tree
1209DEBUG: p5-getopt-long 2.38_0  is the latest installed
1210DEBUG: p5-getopt-long 2.38_0  is active
1211DEBUG: Merging existing variants  into variants
1212DEBUG: new fully merged portvariants:
1213DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long
1214DEBUG: OS Platform: darwin
1215DEBUG: OS Version: 10.2.0
1216DEBUG: Mac OS X Version: 10.6
1217DEBUG: System Arch: i386
1218DEBUG: setting option os.universal_supported to yes
1219DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1220DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1221DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1222DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
1223DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1224DEBUG: Requested variant darwin is not provided by port p5-getopt-long.
1225DEBUG: Requested variant i386 is not provided by port p5-getopt-long.
1226DEBUG: Requested variant macosx is not provided by port p5-getopt-long.
1227DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0
1228DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
1229DEBUG: epoch: in tree: 0 installed: 0
1230DEBUG: p5-pathtools 3.31_0 exists in the ports tree
1231DEBUG: p5-pathtools 3.31_0  is the latest installed
1232DEBUG: p5-pathtools 3.31_0  is active
1233DEBUG: Merging existing variants  into variants
1234DEBUG: new fully merged portvariants:
1235DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
1236DEBUG: OS Platform: darwin
1237DEBUG: OS Version: 10.2.0
1238DEBUG: Mac OS X Version: 10.6
1239DEBUG: System Arch: i386
1240DEBUG: setting option os.universal_supported to yes
1241DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1242DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1243DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1244DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
1245DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1246DEBUG: Requested variant darwin is not provided by port p5-pathtools.
1247DEBUG: Requested variant i386 is not provided by port p5-pathtools.
1248DEBUG: Requested variant macosx is not provided by port p5-pathtools.
1249DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0
1250DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils
1251DEBUG: epoch: in tree: 0 installed: 0
1252DEBUG: p5-scalar-list-utils 1.23_0 exists in the ports tree
1253DEBUG: p5-scalar-list-utils 1.23_0  is the latest installed
1254DEBUG: p5-scalar-list-utils 1.23_0  is active
1255DEBUG: Merging existing variants  into variants
1256DEBUG: new fully merged portvariants:
1257DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils
1258DEBUG: OS Platform: darwin
1259DEBUG: OS Version: 10.2.0
1260DEBUG: Mac OS X Version: 10.6
1261DEBUG: System Arch: i386
1262DEBUG: setting option os.universal_supported to yes
1263DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1264DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1265DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1266DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
1267DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1268DEBUG: Requested variant darwin is not provided by port p5-scalar-list-utils.
1269DEBUG: Requested variant i386 is not provided by port p5-scalar-list-utils.
1270DEBUG: Requested variant macosx is not provided by port p5-scalar-list-utils.
1271DEBUG: No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-list-utils 1.23_0
1272DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0
1273DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt
1274DEBUG: epoch: in tree: 0 installed: 0
1275DEBUG: getopt 1.1.4_1 exists in the ports tree
1276DEBUG: getopt 1.1.4_1  is the latest installed
1277DEBUG: getopt 1.1.4_1  is active
1278DEBUG: Merging existing variants  into variants
1279DEBUG: new fully merged portvariants:
1280DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt
1281DEBUG: OS Platform: darwin
1282DEBUG: OS Version: 10.2.0
1283DEBUG: Mac OS X Version: 10.6
1284DEBUG: System Arch: i386
1285DEBUG: setting option os.universal_supported to yes
1286DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1287DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1288DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1289DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1290DEBUG: universal variant already exists, so not adding the default one
1291DEBUG: Requested variant darwin is not provided by port getopt.
1292DEBUG: Requested variant i386 is not provided by port getopt.
1293DEBUG: Requested variant macosx is not provided by port getopt.
1294DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1
1295DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
1296DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
1297DEBUG: epoch: in tree: 0 installed: 0
1298DEBUG: iso-codes 3.14_0 exists in the ports tree
1299DEBUG: iso-codes 3.14_0  is the latest installed
1300DEBUG: iso-codes 3.14_0  is active
1301DEBUG: Merging existing variants  into variants
1302DEBUG: new fully merged portvariants:
1303DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
1304DEBUG: OS Platform: darwin
1305DEBUG: OS Version: 10.2.0
1306DEBUG: Mac OS X Version: 10.6
1307DEBUG: System Arch: i386
1308DEBUG: setting option os.universal_supported to yes
1309DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1310DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1311DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1312DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1313DEBUG: Requested variant darwin is not provided by port iso-codes.
1314DEBUG: Requested variant i386 is not provided by port iso-codes.
1315DEBUG: Requested variant macosx is not provided by port iso-codes.
1316DEBUG: No need to upgrade! iso-codes 3.14_0 >= iso-codes 3.14_0
1317DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2
1318DEBUG: epoch: in tree: 0 installed: 0
1319DEBUG: py26-libxml2 2.6.21_0 exists in the ports tree
1320DEBUG: py26-libxml2 2.6.21_0  is the latest installed
1321DEBUG: py26-libxml2 2.6.21_0  is active
1322DEBUG: Merging existing variants  into variants
1323DEBUG: new fully merged portvariants:
1324DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2
1325DEBUG: OS Platform: darwin
1326DEBUG: OS Version: 10.2.0
1327DEBUG: Mac OS X Version: 10.6
1328DEBUG: System Arch: i386
1329DEBUG: setting option os.universal_supported to yes
1330DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1331DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1332DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1333DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1334DEBUG: not using configure, so not adding the default universal variant
1335DEBUG: Requested variant darwin is not provided by port py26-libxml2.
1336DEBUG: Requested variant i386 is not provided by port py26-libxml2.
1337DEBUG: Requested variant macosx is not provided by port py26-libxml2.
1338DEBUG: No need to upgrade! py26-libxml2 2.6.21_0 >= py26-libxml2 2.6.21_0
1339--->  Computing dependencies for gnome-doc-utils
1340DEBUG: Searching for dependency: gettext
1341DEBUG: Found Dependency: receipt exists for gettext
1342DEBUG: Searching for dependency: libxslt
1343DEBUG: Found Dependency: receipt exists for libxslt
1344DEBUG: Searching for dependency: python26
1345DEBUG: Found Dependency: receipt exists for python26
1346DEBUG: Searching for dependency: pkgconfig
1347DEBUG: Found Dependency: receipt exists for pkgconfig
1348DEBUG: Searching for dependency: p5-xml-parser
1349DEBUG: Found Dependency: receipt exists for p5-xml-parser
1350DEBUG: Searching for dependency: docbook-xml
1351DEBUG: Found Dependency: receipt exists for docbook-xml
1352DEBUG: Searching for dependency: docbook-xsl
1353DEBUG: Found Dependency: receipt exists for docbook-xsl
1354DEBUG: Searching for dependency: rarian
1355DEBUG: Found Dependency: receipt exists for rarian
1356DEBUG: Searching for dependency: iso-codes
1357DEBUG: Found Dependency: receipt exists for iso-codes
1358DEBUG: Searching for dependency: py26-libxml2
1359DEBUG: Found Dependency: receipt exists for py26-libxml2
1360DEBUG: Executing org.macports.main (gnome-doc-utils)
1361DEBUG: Skipping completed org.macports.fetch (gnome-doc-utils)
1362DEBUG: Skipping completed org.macports.checksum (gnome-doc-utils)
1363DEBUG: setting option extract.cmd to /usr/bin/bzip2
1364DEBUG: Skipping completed org.macports.extract (gnome-doc-utils)
1365DEBUG: Skipping completed org.macports.patch (gnome-doc-utils)
1366DEBUG: Skipping completed org.macports.configure (gnome-doc-utils)
1367--->  Building gnome-doc-utils
1368DEBUG: Executing org.macports.build (gnome-doc-utils)
1369DEBUG: port disallows a parallel build
1370DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
1371DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1" && /usr/bin/make all'
1372Making all in data
1373Making all in icons
1374Making all in hicolor
1375Making all in 48x48
1376make[4]: Nothing to be done for `all'.
1377Making all in scalable
1378make[4]: Nothing to be done for `all'.
1379make[4]: Nothing to be done for `all-am'.
1380make[3]: Nothing to be done for `all-am'.
1381Making all in templates
1382make[2]: Nothing to be done for `all'.
1383Making all in watermarks
1384make[2]: Nothing to be done for `all'.
1385make[2]: Nothing to be done for `all-am'.
1386Making all in po
1387make[1]: Nothing to be done for `all'.
1388Making all in rng
1389Making all in mallard
1390make[2]: Nothing to be done for `all'.
1391make[2]: Nothing to be done for `all-am'.
1392Making all in xslt
1393Making all in gettext
1394make[2]: Nothing to be done for `all'.
1395Making all in docbook
1396Making all in common
1397make[3]: Nothing to be done for `all'.
1398Making all in html
1399make[3]: Nothing to be done for `all'.
1400Making all in omf
1401make[3]: Nothing to be done for `all'.
1402Making all in utils
1403make[3]: Nothing to be done for `all'.
1404make[3]: Nothing to be done for `all-am'.
1405Making all in mallard
1406Making all in common
1407make[3]: Nothing to be done for `all'.
1408Making all in html
1409make[3]: Nothing to be done for `all'.
1410Making all in utils
1411make[3]: Nothing to be done for `all'.
1412make[3]: Nothing to be done for `all-am'.
1413Making all in common
1414make[2]: Nothing to be done for `all'.
1415make[2]: Nothing to be done for `all-am'.
1416Making all in tools
1417make[1]: Nothing to be done for `all'.
1418Making all in xml2po
1419Making all in xml2po
1420Making all in modes
1421make[3]: Nothing to be done for `all'.
1422make[3]: Nothing to be done for `all-am'.
1423Making all in examples
1424make[2]: Nothing to be done for `all'.
1425make[2]: Nothing to be done for `all-am'.
1426Making all in doc
1427Making all in gnome-doc-make
1428xsltproc -o gnome-doc-make-C.omf --stringparam db2omf.basename gnome-doc-make --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd  --stringparam db2omf.lang C --stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/gnome-doc-make/gnome-doc-make.omf.in"  ../../xslt/docbook/omf/db2omf.xsl C/gnome-doc-make.xml || { rm -f "gnome-doc-make-C.omf"; exit 1; }
1429/bin/sh: line 1: 88931 Segmentation fault      xsltproc -o gnome-doc-make-C.omf --stringparam db2omf.basename gnome-doc-make --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd --stringparam db2omf.lang C --stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1/doc/gnome-doc-make/gnome-doc-make.omf.in" ../../xslt/docbook/omf/db2omf.xsl C/gnome-doc-make.xml
1430make[2]: *** [gnome-doc-make-C.omf] Error 1
1431make[1]: *** [all-recursive] Error 1
1432make: *** [all-recursive] Error 1
1433Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1" && /usr/bin/make all " returned error 2
1434DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnome-doc-utils/work/gnome-doc-utils-0.18.1" && /usr/bin/make all " returned error 2
1435    while executing
1436"command_exec build"
1437    (procedure "portbuild::build_main" line 9)
1438    invoked from within
1439"$procedure $targetname"
1440Warning: the following items did not execute (for gnome-doc-utils): org.macports.activate org.macports.build org.macports.destroot org.macports.install
1441Error: Status 1 encountered during processing.
1442To report a bug, see <http://guide.macports.org/#project.tickets>