Ticket #29294: py26-scipy_main.log

File py26-scipy_main.log, 45.3 KB (added by kernelblaha@…, 13 years ago)

py-scipy installation log file

Line 
1version:1
2:debug:main epoch: in tree: 0 installed: 0
3:debug:main python26 2.6.6_1 exists in the ports tree
4:debug:main python26 2.6.6_1  is the latest installed
5:debug:main python26 2.6.6_1  is active
6:debug:main Merging existing variants '' into variants
7:debug:main new fully merged portvariants:
8:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
9:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
10:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
12:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
13:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
14:debug:main universal variant already exists, so not adding the default one
15:debug:main No need to upgrade! python26 2.6.6_1 >= python26 2.6.6_1
16:debug:main epoch: in tree: 0 installed: 0
17:debug:main gettext 0.18.1.1_2 exists in the ports tree
18:debug:main gettext 0.18.1.1_2  is the latest installed
19:debug:main gettext 0.18.1.1_2  is active
20:debug:main Merging existing variants '' into variants
21:debug:main new fully merged portvariants:
22:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
23:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
24:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
25:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
26:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
27:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
28:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
29:debug:main universal variant already exists, so not adding the default one
30:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
31:debug:main epoch: in tree: 0 installed: 0
32:debug:main libiconv 1.13.1_0 exists in the ports tree
33:debug:main libiconv 1.13.1_0  is the latest installed
34:debug:main libiconv 1.13.1_0  is active
35:debug:main Merging existing variants '' into variants
36:debug:main new fully merged portvariants:
37:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
38:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
39:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
40:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
41:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
42:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
43:debug:main universal variant already exists, so not adding the default one
44:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
45:debug:main epoch: in tree: 0 installed: 0
46:debug:main ncurses 5.9_0 exists in the ports tree
47:debug:main ncurses 5.9_0  is the latest installed
48:debug:main ncurses 5.9_0  is active
49:debug:main Merging existing variants '' into variants
50:debug:main new fully merged portvariants:
51:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
52:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
53:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
54:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
55:debug:main adding the default universal variant
56:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
57:debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
58:debug:main epoch: in tree: 0 installed: 0
59:debug:main expat 2.0.1_1 exists in the ports tree
60:debug:main expat 2.0.1_1  is the latest installed
61:debug:main expat 2.0.1_1  is active
62:debug:main Merging existing variants '' into variants
63:debug:main new fully merged portvariants:
64:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
65:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
66:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
67:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
68:debug:main adding the default universal variant
69:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
70:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
71:debug:main epoch: in tree: 0 installed: 0
72:debug:main zlib 1.2.5_0 exists in the ports tree
73:debug:main zlib 1.2.5_0  is the latest installed
74:debug:main zlib 1.2.5_0  is active
75:debug:main Merging existing variants '' into variants
76:debug:main new fully merged portvariants:
77:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
78:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
79:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
80:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
81:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
82:debug:main adding the default universal variant
83:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
84:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
85:debug:main epoch: in tree: 1 installed: 1
86:debug:main openssl 1.0.0d_0 exists in the ports tree
87:debug:main openssl 1.0.0d_0  is the latest installed
88:debug:main openssl 1.0.0d_0  is active
89:debug:main Merging existing variants '' into variants
90:debug:main new fully merged portvariants:
91:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
92:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
93:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
94:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
95:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
96:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
97:debug:main universal variant already exists, so not adding the default one
98:debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
99:debug:main epoch: in tree: 0 installed: 0
100:debug:main sqlite3 3.7.6_0 exists in the ports tree
101:debug:main sqlite3 3.7.6_0  is the latest installed
102:debug:main sqlite3 3.7.6_0  is active
103:debug:main Merging existing variants '' into variants
104:debug:main new fully merged portvariants:
105:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
106:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
107:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
108:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
109:debug:main adding the default universal variant
110:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
111:debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
112:debug:main epoch: in tree: 0 installed: 0
113:debug:main readline 6.2.000_0 exists in the ports tree
114:debug:main readline 6.2.000_0  is the latest installed
115:debug:main readline 6.2.000_0  is active
116:debug:main Merging existing variants '' into variants
117:debug:main new fully merged portvariants:
118:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
119:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
120:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
121:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
122:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
123:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
124:debug:main universal variant already exists, so not adding the default one
125:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
126:debug:main epoch: in tree: 0 installed: 0
127:debug:main db46 4.6.21_6 exists in the ports tree
128:debug:main db46 4.6.21_6  is the latest installed
129:debug:main db46 4.6.21_6  is active
130:debug:main Merging existing variants '' into variants
131:debug:main new fully merged portvariants:
132:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
133:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
134:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
135:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
136:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
137:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
138:debug:main universal variant already exists, so not adding the default one
139:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
140:debug:main epoch: in tree: 0 installed: 0
141:debug:main gdbm 1.8.3_3 exists in the ports tree
142:debug:main gdbm 1.8.3_3  is the latest installed
143:debug:main gdbm 1.8.3_3  is active
144:debug:main Merging existing variants '' into variants
145:debug:main new fully merged portvariants:
146:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
147:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
148:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
149:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
150:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
151:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
152:debug:main universal variant already exists, so not adding the default one
153:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
154:debug:main epoch: in tree: 0 installed: 0
155:debug:main bzip2 1.0.6_0 exists in the ports tree
156:debug:main bzip2 1.0.6_0  is the latest installed
157:debug:main bzip2 1.0.6_0  is active
158:debug:main Merging existing variants '' into variants
159:debug:main new fully merged portvariants:
160:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
161:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
162:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
163:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
164:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
165:debug:main universal variant already exists, so not adding the default one
166:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
167:debug:main epoch: in tree: 20100319 installed: 20100319
168:debug:main py26-numpy 1.5.1_1 exists in the ports tree
169:debug:main py26-numpy 1.5.1_1 +atlas+gcc44 is the latest installed
170:debug:main py26-numpy 1.5.1_1 +atlas+gcc44 is active
171:debug:main Merging existing variants '+atlas+gcc44' into variants
172:debug:main new fully merged portvariants: gcc44 + atlas +
173:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
174:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
175:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
176:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
177:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
178:debug:main adding the default universal variant
179:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
180:debug:main Executing variant atlas provides atlas
181:debug:main Executing variant gcc44 provides gcc44
182:debug:main No need to upgrade! py26-numpy 1.5.1_1 >= py26-numpy 1.5.1_1
183:debug:main epoch: in tree: 0 installed: 0
184:debug:main fftw-3 3.2.2_0 exists in the ports tree
185:debug:main fftw-3 3.2.2_0  is the latest installed
186:debug:main fftw-3 3.2.2_0  is active
187:debug:main Merging existing variants '' into variants
188:debug:main new fully merged portvariants:
189:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
190:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
191:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
192:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
193:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
194:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
195:debug:main universal variant already exists, so not adding the default one
196:debug:main No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
197:debug:main epoch: in tree: 0 installed: 0
198:debug:main py26-nose 1.0.0_0 exists in the ports tree
199:debug:main py26-nose 1.0.0_0  is the latest installed
200:debug:main py26-nose 1.0.0_0  is active
201:debug:main Merging existing variants '' into variants
202:debug:main new fully merged portvariants:
203:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
204:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
205:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
206:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
207:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
208:debug:main only one arch supported, so not adding the default universal variant
209:debug:main No need to upgrade! py26-nose 1.0.0_0 >= py26-nose 1.0.0_0
210:debug:main epoch: in tree: 0 installed: 0
211:debug:main py26-distribute 0.6.15_0 exists in the ports tree
212:debug:main py26-distribute 0.6.15_0  is the latest installed
213:debug:main py26-distribute 0.6.15_0  is active
214:debug:main Merging existing variants '' into variants
215:debug:main new fully merged portvariants:
216:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-distribute
217:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
218:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
219:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
220:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
221:debug:main adding the default universal variant
222:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
223:debug:main No need to upgrade! py26-distribute 0.6.15_0 >= py26-distribute 0.6.15_0
224:debug:main epoch: in tree: 1 installed: 1
225:debug:main gcc44 4.4.6_0 exists in the ports tree
226:debug:main gcc44 4.4.6_0  is the latest installed
227:debug:main gcc44 4.4.6_0  is active
228:debug:main Merging existing variants '' into variants
229:debug:main new fully merged portvariants:
230:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc44
231:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
232:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
233:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
234:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
235:debug:main universal variant already exists, so not adding the default one
236:debug:main No need to upgrade! gcc44 4.4.6_0 >= gcc44 4.4.6_0
237:debug:main epoch: in tree: 0 installed: 0
238:debug:main gmp 5.0.1_1 exists in the ports tree
239:debug:main gmp 5.0.1_1  is the latest installed
240:debug:main gmp 5.0.1_1  is active
241:debug:main Merging existing variants '' into variants
242:debug:main new fully merged portvariants:
243:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
244:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
245:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
246:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
247:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
248:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
249:debug:main universal variant already exists, so not adding the default one
250:debug:main No need to upgrade! gmp 5.0.1_1 >= gmp 5.0.1_1
251:debug:main epoch: in tree: 0 installed: 0
252:debug:main mpfr 3.0.1-p1_0 exists in the ports tree
253:debug:main mpfr 3.0.1-p1_0  is the latest installed
254:debug:main mpfr 3.0.1-p1_0  is active
255:debug:main Merging existing variants '' into variants
256:debug:main new fully merged portvariants:
257:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
258:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
259:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
260:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
261:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
262:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
263:debug:main universal variant already exists, so not adding the default one
264:debug:main No need to upgrade! mpfr 3.0.1-p1_0 >= mpfr 3.0.1-p1_0
265:debug:main epoch: in tree: 0 installed: 0
266:debug:main atlas 3.9.37_0 exists in the ports tree
267:debug:main atlas 3.9.37_0 +gcc44 is the latest installed
268:debug:main atlas 3.9.37_0 +gcc44 is active
269:debug:main Merging existing variants '+gcc44' into variants
270:debug:main new fully merged portvariants: gcc44 +
271:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
272:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
273:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
274:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
275:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
276:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
277:debug:main universal variant already exists, so not adding the default one
278:debug:main Executing variant gcc44 provides gcc44
279:debug:main No need to upgrade! atlas 3.9.37_0 >= atlas 3.9.37_0
280:debug:main epoch: in tree: 0 installed: 0
281:debug:main gzip 1.4_0 exists in the ports tree
282:debug:main gzip 1.4_0  is the latest installed
283:debug:main gzip 1.4_0  is active
284:debug:main Merging existing variants '' into variants
285:debug:main new fully merged portvariants:
286:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
287:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
288:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
289:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
290:debug:main adding the default universal variant
291:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
292:debug:main No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
293:debug:main epoch: in tree: 0 installed: 0
294:debug:main SuiteSparse 3.4.0_0 exists in the ports tree
295:debug:main SuiteSparse 3.4.0_0  is the latest installed
296:debug:main SuiteSparse 3.4.0_0  is active
297:debug:main Merging existing variants '' into variants
298:debug:main new fully merged portvariants:
299:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse
300:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
301:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
302:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
303:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
304:debug:main universal variant already exists, so not adding the default one
305:debug:main No need to upgrade! SuiteSparse 3.4.0_0 >= SuiteSparse 3.4.0_0
306:debug:main epoch: in tree: 0 installed: 0
307:debug:main swig-python 2.0.3_0 exists in the ports tree
308:debug:main swig-python 2.0.3_0  is the latest installed
309:debug:main swig-python 2.0.3_0  is active
310:debug:main Merging existing variants '' into variants
311:debug:main new fully merged portvariants:
312:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig-python
313:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
314:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
315:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
316:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/swigbinding-1.0.tcl
317:debug:main Re-registering default for distname
318:debug:main only one arch supported, so not adding the default universal variant
319:debug:main No need to upgrade! swig-python 2.0.3_0 >= swig-python 2.0.3_0
320:debug:main epoch: in tree: 0 installed: 0
321:debug:main swig 2.0.3_0 exists in the ports tree
322:debug:main swig 2.0.3_0  is the latest installed
323:debug:main swig 2.0.3_0  is active
324:debug:main Merging existing variants '' into variants
325:debug:main new fully merged portvariants:
326:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
327:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
328:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
329:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
330:debug:main adding the default universal variant
331:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
332:debug:main No need to upgrade! swig 2.0.3_0 >= swig 2.0.3_0
333:debug:main epoch: in tree: 0 installed: 0
334:debug:main pcre 8.12_0 exists in the ports tree
335:debug:main pcre 8.12_0  is the latest installed
336:debug:main pcre 8.12_0  is active
337:debug:main Merging existing variants '' into variants
338:debug:main new fully merged portvariants:
339:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
340:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
341:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
342:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
343:debug:main adding the default universal variant
344:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
345:debug:main No need to upgrade! pcre 8.12_0 >= pcre 8.12_0
346:debug:main epoch: in tree: 0 installed: 0
347:debug:main python_select 0.3_0 exists in the ports tree
348:debug:main python_select 0.3_0 +darwin_9 is the latest installed
349:debug:main python_select 0.3_0 +darwin_9 is active
350:debug:main Merging existing variants '+darwin_9' into variants
351:debug:main new fully merged portvariants: darwin_9 +
352:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
353:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
354:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
355:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
356:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
357:debug:main only one arch supported, so not adding the default universal variant
358:debug:main Requested variant darwin_9 is not provided by port python_select.
359:debug:main Skipping upgrade since python_select 0.3_0 >= python_select 0.3_0, even though installed variants "+darwin_9" do not match "".
360:msg:main --->  Computing dependencies for py26-scipy:info:main .:debug:main Searching for dependency: python26
361:debug:main Found Dependency: receipt exists for python26
362:debug:main Searching for dependency: py26-numpy
363:debug:main Found Dependency: receipt exists for py26-numpy
364:debug:main Searching for dependency: py26-nose
365:debug:main Found Dependency: receipt exists for py26-nose
366:debug:main Searching for dependency: SuiteSparse
367:debug:main Found Dependency: receipt exists for SuiteSparse
368:debug:main Searching for dependency: swig-python
369:debug:main Found Dependency: receipt exists for swig-python
370:debug:main Searching for dependency: atlas
371:debug:main Found Dependency: receipt exists for atlas
372:debug:main Searching for dependency: gcc44
373:debug:main Found Dependency: receipt exists for gcc44
374:msg:main
375:debug:main Executing org.macports.main (py26-scipy)
376:msg:main --->  Fetching py26-scipy
377:debug:fetch fetch phase started at Wed Apr 27 10:07:06 BST 2011
378:debug:fetch Executing org.macports.fetch (py26-scipy)
379:msg:fetch --->  Verifying checksum(s) for py26-scipy
380:debug:checksum checksum phase started at Wed Apr 27 10:07:06 BST 2011
381:debug:checksum Executing org.macports.checksum (py26-scipy)
382:info:checksum --->  Checksumming scipy-0.9.0.tar.gz
383:debug:checksum Correct (md5) checksum for scipy-0.9.0.tar.gz
384:debug:checksum Correct (sha1) checksum for scipy-0.9.0.tar.gz
385:debug:checksum Correct (rmd160) checksum for scipy-0.9.0.tar.gz
386:msg:checksum --->  Extracting py26-scipy
387:debug:extract extract phase started at Wed Apr 27 10:07:06 BST 2011
388:debug:extract Executing org.macports.extract (py26-scipy)
389:info:extract --->  Extracting scipy-0.9.0.tar.gz
390:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/python/scipy-0.9.0.tar.gz'
391:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-scipy/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
392:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-scipy/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/python/scipy-0.9.0.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
393:info:extract /usr/bin/gnutar: Read 4096 bytes from -
394:debug:patch patch phase started at Wed Apr 27 10:07:08 BST 2011
395:debug:patch Executing org.macports.patch (py26-scipy)
396:debug:patch Executing proc-post-org.macports.patch-patch-0
397:msg:patch --->  Configuring py26-scipy
398:debug:patch Using compiler 'MacPorts gcc 4.4'
399:debug:configure configure phase started at Wed Apr 27 10:07:08 BST 2011
400:debug:configure Executing org.macports.configure (py26-scipy)
401:msg:configure --->  Building py26-scipy
402:debug:build build phase started at Wed Apr 27 10:07:08 BST 2011
403:debug:build Executing proc-pre-org.macports.build-build-0
404:debug:build Executing org.macports.build (py26-scipy)
405:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-scipy/work/.CC_PRINT_OPTIONS' LAPACK='/opt/local/lib' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5' ATLAS='/opt/local/lib' CC='/opt/local/bin/gcc-mp-4.4' BLAS='/opt/local/lib' CXX='/opt/local/bin/g++-mp-4.4' CCFLAGS='-I/opt/local/include -L/opt/local/lib'
406:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-scipy/work/scipy-0.9.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg config_fc --fcompiler gnu95 --f77exec /opt/local/bin/gfortran-mp-4.4 --f90exec /opt/local/bin/gfortran-mp-4.4 config --cc /opt/local/bin/gcc-mp-4.4 --include-dirs /opt/local/include --library-dirs /opt/local/lib build'
407:info:build Warning: No configuration returned, assuming unavailable.blas_opt_info:
408:info:build blas_mkl_info:
409:info:build   libraries mkl,vml,guide not found in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib
410:info:build   libraries mkl,vml,guide not found in /usr/local/lib
411:info:build   libraries mkl,vml,guide not found in /usr/lib
412:info:build   libraries mkl,vml,guide not found in /opt/local/lib
413:info:build   libraries mkl,vml,guide not found in /sw/lib
414:info:build   NOT AVAILABLE
415:info:build
416:info:build atlas_blas_threads_info:
417:info:build Setting PTATLAS=ATLAS
418:info:build Setting PTATLAS=ATLAS
419:info:build Setting PTATLAS=ATLAS
420:info:build   FOUND:
421:info:build     libraries = ['ptf77blas', 'ptcblas', 'atlas']
422:info:build     library_dirs = ['/opt/local/lib']
423:info:build     language = c
424:info:build     include_dirs = ['/opt/local/include']
425:info:build
426:info:build /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/command/config.py:413: DeprecationWarning:
427:info:build +++++++++++++++++++++++++++++++++++++++++++++++++
428:info:build Usage of get_output is deprecated: please do not
429:info:build use it anymore, and avoid configuration checks
430:info:build involving running executable on the target machine.
431:info:build +++++++++++++++++++++++++++++++++++++++++++++++++
432:info:build
433:info:build   DeprecationWarning)
434:info:build customize NAGFCompiler
435:info:build Could not locate executable f95
436:info:build customize AbsoftFCompiler
437:info:build Could not locate executable f90
438:info:build Could not locate executable f77
439:info:build customize IBMFCompiler
440:info:build Could not locate executable xlf90
441:info:build Could not locate executable xlf
442:info:build customize IntelFCompiler
443:info:build Could not locate executable ifort
444:info:build Could not locate executable ifc
445:info:build customize GnuFCompiler
446:info:build Could not locate executable g77
447:info:build customize Gnu95FCompiler
448:info:build Could not locate executable gfortran
449:info:build customize G95FCompiler
450:info:build Could not locate executable g95
451:info:build don't know how to compile Fortran code on platform 'posix'
452:info:build compiling '_configtest.c':
453:info:build
454:info:build /* This file is generated from numpy/distutils/system_info.py */
455:info:build void ATL_buildinfo(void);
456:info:build int main(void) {
457:info:build   ATL_buildinfo();
458:info:build   return 0;
459:info:build }
460:info:build C compiler: /opt/local/bin/gcc-mp-4.4 -fno-strict-aliasing -fno-common -dynamic -pipe -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes
461:info:build
462:info:build compile options: '-c'
463:info:build gcc-mp-4.4: _configtest.c
464:info:build /opt/local/bin/gcc-mp-4.4 _configtest.o -L/opt/local/lib -lptf77blas -lptcblas -latlas -o _configtest
465:info:build ATLAS version 3.9.37 built by root on Tue Apr 26 16:53:50 BST 2011:
466:info:build    UNAME    : Darwin b136-ld3-mlt.bio.warwick.ac.uk 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4 1/RELEASE_I386 i386
467:info:build    INSTFLG  : -1 0 -a 1 -l 1
468:info:build    ARCHDEFS : -DATL_OS_OSX -DATL_ARCH_Core2 -DATL_CPUMHZ=3200 -DATL_SSE3 -DATL_SSE2 -DATL_SSE1 -DATL_GAS_x8632
469:info:build    F2CDEFS  : -DAdd_ -DF77_INTEGER=int -DStringSunStyle
470:info:build    CACHEEDGE: 2097152
471:info:build    F77      : /opt/local/bin/gfortran-mp-4.4, version GNU Fortran (GCC) 4.4.6
472:info:build    F77FLAGS : -O -fPIC -m32
473:info:build    SMC      : /opt/local/bin/gcc-mp-4.4, version gcc-mp-4.4 (GCC) 4.4.6
474:info:build    SMCFLAGS : -fomit-frame-pointer -mfpmath=sse -msse3 -O2 -fPIC -m32
475:info:build    SKC      : /opt/local/bin/gcc-mp-4.4, version gcc-mp-4.4 (GCC) 4.4.6
476:info:build    SKCFLAGS : -fomit-frame-pointer -mfpmath=sse -msse3 -O2 -fPIC -m32
477:info:build success!
478:info:build removing: _configtest.c _configtest.o _configtest
479:info:build   FOUND:
480:info:build     libraries = ['ptf77blas', 'ptcblas', 'atlas']
481:info:build     library_dirs = ['/opt/local/lib']
482:info:build     language = c
483:info:build     define_macros = [('ATLAS_INFO', '"\\"3.9.37\\""')]
484:info:build     include_dirs = ['/opt/local/include']
485:info:build
486:info:build non-existing path in 'scipy/io': 'docs'
487:info:build ATLAS version: 3.9.37
488:info:build lapack_opt_info:
489:info:build lapack_mkl_info:
490:info:build mkl_info:
491:info:build   libraries mkl,vml,guide not found in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib
492:info:build   libraries mkl,vml,guide not found in /usr/local/lib
493:info:build   libraries mkl,vml,guide not found in /usr/lib
494:info:build   libraries mkl,vml,guide not found in /opt/local/lib
495:info:build   libraries mkl,vml,guide not found in /sw/lib
496:info:build   NOT AVAILABLE
497:info:build
498:info:build   NOT AVAILABLE
499:info:build
500:info:build atlas_threads_info:
501:info:build Setting PTATLAS=ATLAS
502:info:build   libraries lapack_atlas not found in /opt/local/lib
503:info:build numpy.distutils.system_info.atlas_threads_info
504:info:build Setting PTATLAS=ATLAS
505:info:build Setting PTATLAS=ATLAS
506:info:build   FOUND:
507:info:build     libraries = ['lapack', 'ptf77blas', 'ptcblas', 'atlas']
508:info:build     library_dirs = ['/opt/local/lib']
509:info:build     language = f77
510:info:build     include_dirs = ['/opt/local/include']
511:info:build
512:info:build customize NAGFCompiler
513:info:build customize AbsoftFCompiler
514:info:build customize IBMFCompiler
515:info:build customize IntelFCompiler
516:info:build customize GnuFCompiler
517:info:build customize Gnu95FCompiler
518:info:build customize G95FCompiler
519:info:build don't know how to compile Fortran code on platform 'posix'
520:info:build compiling '_configtest.c':
521:info:build
522:info:build /* This file is generated from numpy/distutils/system_info.py */
523:info:build void ATL_buildinfo(void);
524:info:build int main(void) {
525:info:build   ATL_buildinfo();
526:info:build   return 0;
527:info:build }
528:info:build C compiler: /opt/local/bin/gcc-mp-4.4 -fno-strict-aliasing -fno-common -dynamic -pipe -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes
529:info:build
530:info:build compile options: '-c'
531:info:build gcc-mp-4.4: _configtest.c
532:info:build /opt/local/bin/gcc-mp-4.4 _configtest.o -L/opt/local/lib -llapack -lptf77blas -lptcblas -latlas -o _configtest
533:info:build ATLAS version 3.9.37 built by root on Tue Apr 26 16:53:50 BST 2011:
534:info:build    UNAME    : Darwin b136-ld3-mlt.bio.warwick.ac.uk 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4 1/RELEASE_I386 i386
535:info:build    INSTFLG  : -1 0 -a 1 -l 1
536:info:build    ARCHDEFS : -DATL_OS_OSX -DATL_ARCH_Core2 -DATL_CPUMHZ=3200 -DATL_SSE3 -DATL_SSE2 -DATL_SSE1 -DATL_GAS_x8632
537:info:build    F2CDEFS  : -DAdd_ -DF77_INTEGER=int -DStringSunStyle
538:info:build    CACHEEDGE: 2097152
539:info:build    F77      : /opt/local/bin/gfortran-mp-4.4, version GNU Fortran (GCC) 4.4.6
540:info:build    F77FLAGS : -O -fPIC -m32
541:info:build    SMC      : /opt/local/bin/gcc-mp-4.4, version gcc-mp-4.4 (GCC) 4.4.6
542:info:build    SMCFLAGS : -fomit-frame-pointer -mfpmath=sse -msse3 -O2 -fPIC -m32
543:info:build    SKC      : /opt/local/bin/gcc-mp-4.4, version gcc-mp-4.4 (GCC) 4.4.6
544:info:build    SKCFLAGS : -fomit-frame-pointer -mfpmath=sse -msse3 -O2 -fPIC -m32
545:info:build success!
546:info:build removing: _configtest.c _configtest.o _configtest
547:info:build   FOUND:
548:info:build     libraries = ['lapack', 'ptf77blas', 'ptcblas', 'atlas']
549:info:build     library_dirs = ['/opt/local/lib']
550:info:build     language = f77
551:info:build     define_macros = [('ATLAS_INFO', '"\\"3.9.37\\""')]
552:info:build     include_dirs = ['/opt/local/include']
553:info:build
554:info:build ATLAS version: 3.9.37
555:info:build ATLAS version: 3.9.37
556:info:build umfpack_info:
557:info:build   libraries umfpack not found in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib
558:info:build   libraries umfpack not found in /usr/local/lib
559:info:build   libraries umfpack not found in /usr/lib
560:info:build amd_info:
561:info:build   libraries amd not found in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib
562:info:build   libraries amd not found in /usr/local/lib
563:info:build   libraries amd not found in /usr/lib
564:info:build   FOUND:
565:info:build     libraries = ['amd']
566:info:build     library_dirs = ['/opt/local/lib']
567:info:build
568:info:build   FOUND:
569:info:build     libraries = ['umfpack', 'amd']
570:info:build     library_dirs = ['/opt/local/lib']
571:info:build
572:info:build Traceback (most recent call last):
573:info:build   File "setup.py", line 181, in <module>
574:info:build     setup_package()
575:info:build   File "setup.py", line 173, in setup_package
576:info:build     configuration=configuration )
577:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/core.py", line 152, in setup
578:info:build     config = configuration()
579:info:build   File "setup.py", line 122, in configuration
580:info:build     config.add_subpackage('scipy')
581:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 972, in add_subpackage
582:info:build     caller_level = 2)
583:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 941, in get_subpackage
584:info:build     caller_level = caller_level + 1)
585:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 878, in _get_configuration_from_setup_py
586:info:build     config = setup_module.configuration(*args)
587:info:build   File "scipy/setup.py", line 20, in configuration
588:info:build     config.add_subpackage('special')
589:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 972, in add_subpackage
590:info:build     caller_level = 2)
591:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 941, in get_subpackage
592:info:build     caller_level = caller_level + 1)
593:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 878, in _get_configuration_from_setup_py
594:info:build     config = setup_module.configuration(*args)
595:info:build   File "scipy/special/setup.py", line 54, in configuration
596:info:build     extra_info=get_info("npymath")
597:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 2092, in get_info
598:info:build     pkg_info = get_pkg_info(pkgname, dirs)
599:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/misc_util.py", line 2044, in get_pkg_info
600:info:build     return read_config(pkgname, dirs)
601:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/npy_pkg_config.py", line 384, in read_config
602:info:build     v = _read_config_imp(pkg_to_filename(pkgname), dirs)
603:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/npy_pkg_config.py", line 320, in _read_config_imp
604:info:build     meta, vars, sections, reqs = _read_config(filenames)
605:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/npy_pkg_config.py", line 304, in _read_config
606:info:build     meta, vars, sections, reqs = parse_config(f, dirs)
607:info:build   File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/distutils/npy_pkg_config.py", line 276, in parse_config
608:info:build     raise PkgNotFound("Could not find file(s) %s" % str(filenames))
609:info:build numpy.distutils.npy_pkg_config.PkgNotFound: Could not find file(s) ['/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/numpy-1.5.1-py2.6-macosx-10.5-i386.egg/numpy/core/lib/npy-pkg-config/npymath.ini']
610:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-scipy/work/scipy-0.9.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg config_fc --fcompiler gnu95 --f77exec /opt/local/bin/gfortran-mp-4.4 --f90exec /opt/local/bin/gfortran-mp-4.4 config --cc /opt/local/bin/gcc-mp-4.4 --include-dirs /opt/local/include --library-dirs /opt/local/lib build " returned error 1
611:error:build Target org.macports.build returned: shell command failed (see log for details)
612:debug:build Backtrace: shell command failed (see log for details)
613    while executing
614"command_exec build"
615    (procedure "portbuild::build_main" line 8)
616    invoked from within
617"$procedure $targetname"
618:info:build Warning: the following items did not execute (for py26-scipy): org.macports.activate org.macports.build org.macports.destroot org.macports.install
619:notice:build Log for py26-scipy is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-scipy/main.log