| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main openmotif 2.3.2_3 exists in the ports tree |
|---|
| 4 | :debug:main openmotif 2.3.2_3 is the latest installed |
|---|
| 5 | :debug:main openmotif 2.3.2_3 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif |
|---|
| 9 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main No need to upgrade! openmotif 2.3.2_3 >= openmotif 2.3.2_3 |
|---|
| 16 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 17 | :debug:main jpeg 8c_0 exists in the ports tree |
|---|
| 18 | :debug:main jpeg 8c_0 is the latest installed |
|---|
| 19 | :debug:main jpeg 8c_0 is active |
|---|
| 20 | :debug:main Merging existing variants '' into variants |
|---|
| 21 | :debug:main new fully merged portvariants: |
|---|
| 22 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 23 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 24 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main adding the default universal variant |
|---|
| 28 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 29 | :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 |
|---|
| 30 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 31 | :debug:main libpng 1.4.8_0 exists in the ports tree |
|---|
| 32 | :debug:main libpng 1.4.8_0 is the latest installed |
|---|
| 33 | :debug:main libpng 1.4.8_0 is active |
|---|
| 34 | :debug:main Merging existing variants '' into variants |
|---|
| 35 | :debug:main new fully merged portvariants: |
|---|
| 36 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 37 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 38 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 39 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 40 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 42 | :debug:main adding the default universal variant |
|---|
| 43 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 44 | :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 |
|---|
| 45 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 46 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 47 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 48 | :debug:main zlib 1.2.5_0 is active |
|---|
| 49 | :debug:main Merging existing variants '' into variants |
|---|
| 50 | :debug:main new fully merged portvariants: |
|---|
| 51 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 52 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 53 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 57 | :debug:main adding the default universal variant |
|---|
| 58 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 59 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 60 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 61 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 62 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 63 | :debug:main libiconv 1.13.1_0 is active |
|---|
| 64 | :debug:main Merging existing variants '' into variants |
|---|
| 65 | :debug:main new fully merged portvariants: |
|---|
| 66 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 67 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 68 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 69 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 70 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 71 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 72 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 73 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 74 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 75 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 76 | :debug:main xorg-libsm 1.2.0_0 exists in the ports tree |
|---|
| 77 | :debug:main xorg-libsm 1.2.0_0 is the latest installed |
|---|
| 78 | :debug:main xorg-libsm 1.2.0_0 is active |
|---|
| 79 | :debug:main Merging existing variants '' into variants |
|---|
| 80 | :debug:main new fully merged portvariants: |
|---|
| 81 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
|---|
| 82 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 83 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 84 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 85 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 86 | :debug:main adding the default universal variant |
|---|
| 87 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 88 | :debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0 |
|---|
| 89 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 90 | :debug:main xorg-libice 1.0.7_0 exists in the ports tree |
|---|
| 91 | :debug:main xorg-libice 1.0.7_0 is the latest installed |
|---|
| 92 | :debug:main xorg-libice 1.0.7_0 is active |
|---|
| 93 | :debug:main Merging existing variants '' into variants |
|---|
| 94 | :debug:main new fully merged portvariants: |
|---|
| 95 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
|---|
| 96 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 97 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 98 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 99 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 100 | :debug:main adding the default universal variant |
|---|
| 101 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 102 | :debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0 |
|---|
| 103 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 104 | :debug:main xorg-xproto 7.0.22_0 exists in the ports tree |
|---|
| 105 | :debug:main xorg-xproto 7.0.22_0 is the latest installed |
|---|
| 106 | :debug:main xorg-xproto 7.0.22_0 is active |
|---|
| 107 | :debug:main Merging existing variants '' into variants |
|---|
| 108 | :debug:main new fully merged portvariants: |
|---|
| 109 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 110 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 111 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 112 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 113 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 114 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 115 | :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 |
|---|
| 116 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 117 | :debug:main xorg-libXext 1.3.0_0 exists in the ports tree |
|---|
| 118 | :debug:main xorg-libXext 1.3.0_0 is the latest installed |
|---|
| 119 | :debug:main xorg-libXext 1.3.0_0 is active |
|---|
| 120 | :debug:main Merging existing variants '' into variants |
|---|
| 121 | :debug:main new fully merged portvariants: |
|---|
| 122 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 123 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 124 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 125 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 126 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 127 | :debug:main adding the default universal variant |
|---|
| 128 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 129 | :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0 |
|---|
| 130 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 131 | :debug:main xorg-libX11 1.4.3_0 exists in the ports tree |
|---|
| 132 | :debug:main xorg-libX11 1.4.3_0 is the latest installed |
|---|
| 133 | :debug:main xorg-libX11 1.4.3_0 is active |
|---|
| 134 | :debug:main Merging existing variants '' into variants |
|---|
| 135 | :debug:main new fully merged portvariants: |
|---|
| 136 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 137 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 138 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 139 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 140 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 141 | :debug:main adding the default universal variant |
|---|
| 142 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 143 | :debug:main No need to upgrade! xorg-libX11 1.4.3_0 >= xorg-libX11 1.4.3_0 |
|---|
| 144 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 145 | :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree |
|---|
| 146 | :debug:main xorg-libXdmcp 1.1.0_0 is the latest installed |
|---|
| 147 | :debug:main xorg-libXdmcp 1.1.0_0 is active |
|---|
| 148 | :debug:main Merging existing variants '' into variants |
|---|
| 149 | :debug:main new fully merged portvariants: |
|---|
| 150 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 151 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 152 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 153 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 154 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 155 | :debug:main adding the default universal variant |
|---|
| 156 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 157 | :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 |
|---|
| 158 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 159 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 160 | :debug:main xorg-libXau 1.0.6_0 is the latest installed |
|---|
| 161 | :debug:main xorg-libXau 1.0.6_0 is active |
|---|
| 162 | :debug:main Merging existing variants '' into variants |
|---|
| 163 | :debug:main new fully merged portvariants: |
|---|
| 164 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 165 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 166 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 168 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 169 | :debug:main adding the default universal variant |
|---|
| 170 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 171 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 172 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 173 | :debug:main xorg-libxcb 1.7_0 exists in the ports tree |
|---|
| 174 | :debug:main xorg-libxcb 1.7_0 +python27 is the latest installed |
|---|
| 175 | :debug:main xorg-libxcb 1.7_0 +python27 is active |
|---|
| 176 | :debug:main Merging existing variants '+python27' into variants |
|---|
| 177 | :debug:main new fully merged portvariants: python27 + |
|---|
| 178 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb |
|---|
| 179 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 180 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 181 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 182 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | :debug:main adding the default universal variant |
|---|
| 184 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 185 | :debug:main Executing variant python27 provides python27 |
|---|
| 186 | :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 |
|---|
| 187 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 188 | :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree |
|---|
| 189 | :debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed |
|---|
| 190 | :debug:main xorg-xcb-proto 1.6_0 +python27 is active |
|---|
| 191 | :debug:main Merging existing variants '+python27' into variants |
|---|
| 192 | :debug:main new fully merged portvariants: python27 + |
|---|
| 193 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto |
|---|
| 194 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 195 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 196 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 197 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 198 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 199 | :debug:main Executing variant python27 provides python27 |
|---|
| 200 | :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 |
|---|
| 201 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 202 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 203 | :debug:main libxml2 2.7.8_0 is the latest installed |
|---|
| 204 | :debug:main libxml2 2.7.8_0 is active |
|---|
| 205 | :debug:main Merging existing variants '' into variants |
|---|
| 206 | :debug:main new fully merged portvariants: |
|---|
| 207 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 208 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 209 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 210 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 211 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 212 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 213 | :debug:main adding the default universal variant |
|---|
| 214 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 215 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 216 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 217 | :debug:main python27 2.7.2_0 exists in the ports tree |
|---|
| 218 | :debug:main python27 2.7.2_0 is the latest installed |
|---|
| 219 | :debug:main python27 2.7.2_0 is active |
|---|
| 220 | :debug:main Merging existing variants '' into variants |
|---|
| 221 | :debug:main new fully merged portvariants: |
|---|
| 222 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 |
|---|
| 223 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 224 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 225 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 226 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 227 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 228 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 229 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 230 | :debug:main No need to upgrade! python27 2.7.2_0 >= python27 2.7.2_0 |
|---|
| 231 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 232 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 233 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 234 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 235 | :debug:main Merging existing variants '' into variants |
|---|
| 236 | :debug:main new fully merged portvariants: |
|---|
| 237 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 238 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 239 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 240 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 241 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 242 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 243 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 244 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 245 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 246 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 247 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 248 | :debug:main ncurses 5.9_0 exists in the ports tree |
|---|
| 249 | :debug:main ncurses 5.9_0 is the latest installed |
|---|
| 250 | :debug:main ncurses 5.9_0 is active |
|---|
| 251 | :debug:main Merging existing variants '' into variants |
|---|
| 252 | :debug:main new fully merged portvariants: |
|---|
| 253 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 254 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 255 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 256 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 257 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 258 | :debug:main adding the default universal variant |
|---|
| 259 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 260 | :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0 |
|---|
| 261 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 262 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 263 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 264 | :debug:main expat 2.0.1_1 is active |
|---|
| 265 | :debug:main Merging existing variants '' into variants |
|---|
| 266 | :debug:main new fully merged portvariants: |
|---|
| 267 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 268 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 269 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 270 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 271 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 272 | :debug:main adding the default universal variant |
|---|
| 273 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 274 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 275 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 276 | :debug:main openssl 1.0.0d_0 exists in the ports tree |
|---|
| 277 | :debug:main openssl 1.0.0d_0 is the latest installed |
|---|
| 278 | :debug:main openssl 1.0.0d_0 is active |
|---|
| 279 | :debug:main Merging existing variants '' into variants |
|---|
| 280 | :debug:main new fully merged portvariants: |
|---|
| 281 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 282 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 283 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 284 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 285 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 286 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 287 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 288 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 289 | :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 |
|---|
| 290 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 291 | :debug:main sqlite3 3.7.7.1_0 exists in the ports tree |
|---|
| 292 | :debug:main sqlite3 3.7.7.1_0 is the latest installed |
|---|
| 293 | :debug:main sqlite3 3.7.7.1_0 is active |
|---|
| 294 | :debug:main Merging existing variants '' into variants |
|---|
| 295 | :debug:main new fully merged portvariants: |
|---|
| 296 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 297 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 298 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 299 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 300 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 301 | :debug:main adding the default universal variant |
|---|
| 302 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 303 | :debug:main No need to upgrade! sqlite3 3.7.7.1_0 >= sqlite3 3.7.7.1_0 |
|---|
| 304 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 305 | :debug:main readline 6.2.000_0 exists in the ports tree |
|---|
| 306 | :debug:main readline 6.2.000_0 is the latest installed |
|---|
| 307 | :debug:main readline 6.2.000_0 is active |
|---|
| 308 | :debug:main Merging existing variants '' into variants |
|---|
| 309 | :debug:main new fully merged portvariants: |
|---|
| 310 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 311 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 312 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 313 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 314 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 315 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 316 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 317 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 318 | :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 |
|---|
| 319 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 320 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 321 | :debug:main db46 4.6.21_6 is the latest installed |
|---|
| 322 | :debug:main db46 4.6.21_6 is active |
|---|
| 323 | :debug:main Merging existing variants '' into variants |
|---|
| 324 | :debug:main new fully merged portvariants: |
|---|
| 325 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 326 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 327 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 328 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 329 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 330 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 331 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 332 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 333 | :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 334 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 335 | :debug:main gdbm 1.8.3_3 exists in the ports tree |
|---|
| 336 | :debug:main gdbm 1.8.3_3 is the latest installed |
|---|
| 337 | :debug:main gdbm 1.8.3_3 is active |
|---|
| 338 | :debug:main Merging existing variants '' into variants |
|---|
| 339 | :debug:main new fully merged portvariants: |
|---|
| 340 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 341 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 342 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 343 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 344 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 345 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 346 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 347 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 348 | :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 |
|---|
| 349 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 350 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 351 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 352 | :debug:main bzip2 1.0.6_0 is active |
|---|
| 353 | :debug:main Merging existing variants '' into variants |
|---|
| 354 | :debug:main new fully merged portvariants: |
|---|
| 355 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 356 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 357 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 358 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 359 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 360 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 361 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 362 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 363 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 364 | :debug:main python_select 0.3_1 exists in the ports tree |
|---|
| 365 | :debug:main python_select 0.3_1 is the latest installed |
|---|
| 366 | :debug:main python_select 0.3_1 is active |
|---|
| 367 | :debug:main Merging existing variants '' into variants |
|---|
| 368 | :debug:main new fully merged portvariants: |
|---|
| 369 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select |
|---|
| 370 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 371 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 372 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 373 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 374 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 375 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 376 | :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 |
|---|
| 377 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 378 | :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 379 | :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 380 | :debug:main xorg-libpthread-stubs 0.3_0 is active |
|---|
| 381 | :debug:main Merging existing variants '' into variants |
|---|
| 382 | :debug:main new fully merged portvariants: |
|---|
| 383 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 384 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 385 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 386 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 387 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 388 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 389 | :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 390 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 391 | :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree |
|---|
| 392 | :debug:main xorg-kbproto 1.0.5_0 is the latest installed |
|---|
| 393 | :debug:main xorg-kbproto 1.0.5_0 is active |
|---|
| 394 | :debug:main Merging existing variants '' into variants |
|---|
| 395 | :debug:main new fully merged portvariants: |
|---|
| 396 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 397 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 398 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 399 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 400 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 401 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 402 | :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 |
|---|
| 403 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 404 | :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree |
|---|
| 405 | :debug:main xorg-xextproto 7.2.0_0 is the latest installed |
|---|
| 406 | :debug:main xorg-xextproto 7.2.0_0 is active |
|---|
| 407 | :debug:main Merging existing variants '' into variants |
|---|
| 408 | :debug:main new fully merged portvariants: |
|---|
| 409 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 410 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 411 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 412 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 413 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 414 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 415 | :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 |
|---|
| 416 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 417 | :debug:main Xft2 2.2.0_0 exists in the ports tree |
|---|
| 418 | :debug:main Xft2 2.2.0_0 is the latest installed |
|---|
| 419 | :debug:main Xft2 2.2.0_0 is active |
|---|
| 420 | :debug:main Merging existing variants '' into variants |
|---|
| 421 | :debug:main new fully merged portvariants: |
|---|
| 422 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 423 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 424 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 425 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 426 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 427 | :debug:main adding the default universal variant |
|---|
| 428 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 429 | :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 |
|---|
| 430 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 431 | :debug:main xrender 0.9.6_0 exists in the ports tree |
|---|
| 432 | :debug:main xrender 0.9.6_0 is the latest installed |
|---|
| 433 | :debug:main xrender 0.9.6_0 is active |
|---|
| 434 | :debug:main Merging existing variants '' into variants |
|---|
| 435 | :debug:main new fully merged portvariants: |
|---|
| 436 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 437 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 438 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 439 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 440 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 441 | :debug:main adding the default universal variant |
|---|
| 442 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 443 | :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 |
|---|
| 444 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 445 | :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree |
|---|
| 446 | :debug:main xorg-renderproto 0.11.1_0 is the latest installed |
|---|
| 447 | :debug:main xorg-renderproto 0.11.1_0 is active |
|---|
| 448 | :debug:main Merging existing variants '' into variants |
|---|
| 449 | :debug:main new fully merged portvariants: |
|---|
| 450 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 451 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 452 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 453 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 454 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 455 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 456 | :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 |
|---|
| 457 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 458 | :debug:main freetype 2.4.5_1 exists in the ports tree |
|---|
| 459 | :debug:main freetype 2.4.5_1 is the latest installed |
|---|
| 460 | :debug:main freetype 2.4.5_1 is active |
|---|
| 461 | :debug:main Merging existing variants '' into variants |
|---|
| 462 | :debug:main new fully merged portvariants: |
|---|
| 463 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 464 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 465 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 466 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 467 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 468 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 469 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 470 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 471 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 472 | :debug:main No need to upgrade! freetype 2.4.5_1 >= freetype 2.4.5_1 |
|---|
| 473 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 474 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 475 | :debug:main fontconfig 2.8.0_0 is the latest installed |
|---|
| 476 | :debug:main fontconfig 2.8.0_0 is active |
|---|
| 477 | :debug:main Merging existing variants '' into variants |
|---|
| 478 | :debug:main new fully merged portvariants: |
|---|
| 479 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 480 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 481 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 482 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 483 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 484 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 485 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 486 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 487 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 488 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 489 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 490 | :debug:main xorg-libXmu 1.1.0_0 exists in the ports tree |
|---|
| 491 | :debug:main xorg-libXmu 1.1.0_0 is the latest installed |
|---|
| 492 | :debug:main xorg-libXmu 1.1.0_0 is active |
|---|
| 493 | :debug:main Merging existing variants '' into variants |
|---|
| 494 | :debug:main new fully merged portvariants: |
|---|
| 495 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu |
|---|
| 496 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 497 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 498 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 499 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 500 | :debug:main adding the default universal variant |
|---|
| 501 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 502 | :debug:main No need to upgrade! xorg-libXmu 1.1.0_0 >= xorg-libXmu 1.1.0_0 |
|---|
| 503 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 504 | :debug:main xorg-libXt 1.1.1_0 exists in the ports tree |
|---|
| 505 | :debug:main xorg-libXt 1.1.1_0 is the latest installed |
|---|
| 506 | :debug:main xorg-libXt 1.1.1_0 is active |
|---|
| 507 | :debug:main Merging existing variants '' into variants |
|---|
| 508 | :debug:main new fully merged portvariants: |
|---|
| 509 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
|---|
| 510 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 511 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 512 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 513 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 514 | :debug:main adding the default universal variant |
|---|
| 515 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 516 | :debug:main No need to upgrade! xorg-libXt 1.1.1_0 >= xorg-libXt 1.1.1_0 |
|---|
| 517 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 518 | :debug:main xorg-libXp 1.0.1_0 exists in the ports tree |
|---|
| 519 | :debug:main xorg-libXp 1.0.1_0 is the latest installed |
|---|
| 520 | :debug:main xorg-libXp 1.0.1_0 is active |
|---|
| 521 | :debug:main Merging existing variants '' into variants |
|---|
| 522 | :debug:main new fully merged portvariants: |
|---|
| 523 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp |
|---|
| 524 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 525 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 526 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 527 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 528 | :debug:main adding the default universal variant |
|---|
| 529 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 530 | :debug:main No need to upgrade! xorg-libXp 1.0.1_0 >= xorg-libXp 1.0.1_0 |
|---|
| 531 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 532 | :debug:main xorg-printproto 1.0.5_0 exists in the ports tree |
|---|
| 533 | :debug:main xorg-printproto 1.0.5_0 is the latest installed |
|---|
| 534 | :debug:main xorg-printproto 1.0.5_0 is active |
|---|
| 535 | :debug:main Merging existing variants '' into variants |
|---|
| 536 | :debug:main new fully merged portvariants: |
|---|
| 537 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto |
|---|
| 538 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 539 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 540 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 541 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 542 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 543 | :debug:main No need to upgrade! xorg-printproto 1.0.5_0 >= xorg-printproto 1.0.5_0 |
|---|
| 544 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 545 | :debug:main mesa 7.10.3_0 exists in the ports tree |
|---|
| 546 | :debug:main mesa 7.10.3_0 +python27 is the latest installed |
|---|
| 547 | :debug:main mesa 7.10.3_0 +python27 is active |
|---|
| 548 | :debug:main Merging existing variants '+python27' into variants |
|---|
| 549 | :debug:main new fully merged portvariants: python27 + |
|---|
| 550 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa |
|---|
| 551 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 552 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 553 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 554 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 555 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 556 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 557 | :debug:main Executing variant python27 provides python27 |
|---|
| 558 | :debug:main No need to upgrade! mesa 7.10.3_0 >= mesa 7.10.3_0 |
|---|
| 559 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 560 | :debug:main xorg-glproto 1.4.12_0 exists in the ports tree |
|---|
| 561 | :debug:main xorg-glproto 1.4.12_0 is the latest installed |
|---|
| 562 | :debug:main xorg-glproto 1.4.12_0 is active |
|---|
| 563 | :debug:main Merging existing variants '' into variants |
|---|
| 564 | :debug:main new fully merged portvariants: |
|---|
| 565 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto |
|---|
| 566 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 567 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 568 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 569 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 570 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 571 | :debug:main No need to upgrade! xorg-glproto 1.4.12_0 >= xorg-glproto 1.4.12_0 |
|---|
| 572 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 573 | :debug:main xorg-dri2proto 2.3_0 exists in the ports tree |
|---|
| 574 | :debug:main xorg-dri2proto 2.3_0 is the latest installed |
|---|
| 575 | :debug:main xorg-dri2proto 2.3_0 is active |
|---|
| 576 | :debug:main Merging existing variants '' into variants |
|---|
| 577 | :debug:main new fully merged portvariants: |
|---|
| 578 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto |
|---|
| 579 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 580 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 581 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 582 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 583 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 584 | :debug:main No need to upgrade! xorg-dri2proto 2.3_0 >= xorg-dri2proto 2.3_0 |
|---|
| 585 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 586 | :debug:main xorg-libXfixes 5.0_0 exists in the ports tree |
|---|
| 587 | :debug:main xorg-libXfixes 5.0_0 is the latest installed |
|---|
| 588 | :debug:main xorg-libXfixes 5.0_0 is active |
|---|
| 589 | :debug:main Merging existing variants '' into variants |
|---|
| 590 | :debug:main new fully merged portvariants: |
|---|
| 591 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes |
|---|
| 592 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 593 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 594 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 595 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 596 | :debug:main adding the default universal variant |
|---|
| 597 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 598 | :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0 |
|---|
| 599 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 600 | :debug:main xorg-fixesproto 5.0_0 exists in the ports tree |
|---|
| 601 | :debug:main xorg-fixesproto 5.0_0 is the latest installed |
|---|
| 602 | :debug:main xorg-fixesproto 5.0_0 is active |
|---|
| 603 | :debug:main Merging existing variants '' into variants |
|---|
| 604 | :debug:main new fully merged portvariants: |
|---|
| 605 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto |
|---|
| 606 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 607 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 608 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 609 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 610 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 611 | :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0 |
|---|
| 612 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 613 | :debug:main xorg-libXi 1.4.1_0 exists in the ports tree |
|---|
| 614 | :debug:main xorg-libXi 1.4.1_0 is the latest installed |
|---|
| 615 | :debug:main xorg-libXi 1.4.1_0 is active |
|---|
| 616 | :debug:main Merging existing variants '' into variants |
|---|
| 617 | :debug:main new fully merged portvariants: |
|---|
| 618 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi |
|---|
| 619 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 620 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 621 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 622 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 623 | :debug:main adding the default universal variant |
|---|
| 624 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 625 | :debug:main No need to upgrade! xorg-libXi 1.4.1_0 >= xorg-libXi 1.4.1_0 |
|---|
| 626 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 627 | :debug:main xorg-inputproto 2.0.1_0 exists in the ports tree |
|---|
| 628 | :debug:main xorg-inputproto 2.0.1_0 is the latest installed |
|---|
| 629 | :debug:main xorg-inputproto 2.0.1_0 is active |
|---|
| 630 | :debug:main Merging existing variants '' into variants |
|---|
| 631 | :debug:main new fully merged portvariants: |
|---|
| 632 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 633 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 634 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 635 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 636 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 637 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 638 | :debug:main No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto 2.0.1_0 |
|---|
| 639 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 640 | :debug:main glw 7.2_1 exists in the ports tree |
|---|
| 641 | :debug:main glw 7.2_1 is the latest installed |
|---|
| 642 | :debug:main glw 7.2_1 is active |
|---|
| 643 | :debug:main Merging existing variants '' into variants |
|---|
| 644 | :debug:main new fully merged portvariants: |
|---|
| 645 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/glw |
|---|
| 646 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 647 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 648 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 649 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 650 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 651 | :debug:main No need to upgrade! glw 7.2_1 >= glw 7.2_1 |
|---|
| 652 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 653 | :debug:main tiff 3.9.5_0 exists in the ports tree |
|---|
| 654 | :debug:main tiff 3.9.5_0 is the latest installed |
|---|
| 655 | :debug:main tiff 3.9.5_0 is active |
|---|
| 656 | :debug:main Merging existing variants '' into variants |
|---|
| 657 | :debug:main new fully merged portvariants: |
|---|
| 658 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff |
|---|
| 659 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 660 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 661 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 662 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 663 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 664 | :debug:main adding the default universal variant |
|---|
| 665 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 666 | :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 |
|---|
| 667 | :msg:main ---> Computing dependencies for molmol:info:main .:debug:main Searching for dependency: openmotif |
|---|
| 668 | :debug:main Found Dependency: receipt exists for openmotif |
|---|
| 669 | :debug:main Searching for dependency: mesa |
|---|
| 670 | :debug:main Found Dependency: receipt exists for mesa |
|---|
| 671 | :debug:main Searching for dependency: glw |
|---|
| 672 | :debug:main Found Dependency: receipt exists for glw |
|---|
| 673 | :debug:main Searching for dependency: tiff |
|---|
| 674 | :debug:main Found Dependency: receipt exists for tiff |
|---|
| 675 | :debug:main Searching for dependency: jpeg |
|---|
| 676 | :debug:main Found Dependency: receipt exists for jpeg |
|---|
| 677 | :debug:main Searching for dependency: libpng |
|---|
| 678 | :debug:main Found Dependency: receipt exists for libpng |
|---|
| 679 | :msg:main |
|---|
| 680 | :debug:main Executing org.macports.main (molmol) |
|---|
| 681 | :debug:main Skipping completed org.macports.fetch (molmol) |
|---|
| 682 | :debug:main Skipping completed org.macports.checksum (molmol) |
|---|
| 683 | :debug:main Extracting to subdirectory worksrcdir |
|---|
| 684 | :debug:main Skipping completed org.macports.extract (molmol) |
|---|
| 685 | :debug:main Skipping completed org.macports.patch (molmol) |
|---|
| 686 | :debug:main Skipping completed org.macports.configure (molmol) |
|---|
| 687 | :msg:main ---> Building molmol |
|---|
| 688 | :debug:build build phase started at Wed Jul 13 17:35:56 CEST 2011 |
|---|
| 689 | :debug:build Executing org.macports.build (molmol) |
|---|
| 690 | :debug:build port disallows a parallel build |
|---|
| 691 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_molmol/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 692 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_molmol/work/molmol-2k.2.0" && /usr/bin/make' |
|---|
| 693 | :info:build /usr/bin/make tools sg src TARGET=default |
|---|
| 694 | :info:build cd tools; /usr/bin/make default |
|---|
| 695 | :info:build /usr/bin/make src TARGET=default |
|---|
| 696 | :info:build cd src; /usr/bin/make default |
|---|
| 697 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 698 | :info:build cd sg; /usr/bin/make default |
|---|
| 699 | :info:build /usr/bin/make src TARGET=default |
|---|
| 700 | :info:build cd src; /usr/bin/make default |
|---|
| 701 | :info:build /usr/bin/make sgdev def pick range ogl x11 no pov rib vrml1 vrml2 ps fm TARGET=default |
|---|
| 702 | :info:build cd sgdev; /usr/bin/make default |
|---|
| 703 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 704 | :info:build cd def; /usr/bin/make default |
|---|
| 705 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 706 | :info:build cd pick; /usr/bin/make default |
|---|
| 707 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 708 | :info:build cd range; /usr/bin/make default |
|---|
| 709 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 710 | :info:build cd ogl; /usr/bin/make default |
|---|
| 711 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 712 | :info:build cd x11; /usr/bin/make default |
|---|
| 713 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 714 | :info:build cd no; /usr/bin/make default |
|---|
| 715 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 716 | :info:build cd pov; /usr/bin/make default |
|---|
| 717 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 718 | :info:build cd rib; /usr/bin/make default |
|---|
| 719 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 720 | :info:build cd vrml1; /usr/bin/make default |
|---|
| 721 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 722 | :info:build cd vrml2; /usr/bin/make default |
|---|
| 723 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 724 | :info:build cd ps; /usr/bin/make default |
|---|
| 725 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 726 | :info:build cd fm; /usr/bin/make default |
|---|
| 727 | :info:build make[6]: Nothing to be done for `default'. |
|---|
| 728 | :info:build cd src; /usr/bin/make default |
|---|
| 729 | :info:build /usr/bin/make os fileio attr data expr prim calc pudev motif tty iodev motx11 motogl ttyno graph ui cmdio cmddial cmdmisc cmdattr cmdrep cmdprop cmdprim cmdanim cmdstruc cmdcalc cmdfig cip main TARGET=default |
|---|
| 730 | :info:build cd os; /usr/bin/make default |
|---|
| 731 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 732 | :info:build cd fileio; /usr/bin/make default |
|---|
| 733 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 734 | :info:build cd attr; /usr/bin/make default |
|---|
| 735 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 736 | :info:build cd data; /usr/bin/make default |
|---|
| 737 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 738 | :info:build cd expr; /usr/bin/make default |
|---|
| 739 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 740 | :info:build cd prim; /usr/bin/make default |
|---|
| 741 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 742 | :info:build cd calc; /usr/bin/make default |
|---|
| 743 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 744 | :info:build cd pudev; /usr/bin/make default |
|---|
| 745 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 746 | :info:build cd motif; /usr/bin/make default |
|---|
| 747 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 748 | :info:build cd tty; /usr/bin/make default |
|---|
| 749 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 750 | :info:build cd iodev; /usr/bin/make default |
|---|
| 751 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 752 | :info:build cd motx11; /usr/bin/make default |
|---|
| 753 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 754 | :info:build cd motogl; /usr/bin/make default |
|---|
| 755 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 756 | :info:build cd ttyno; /usr/bin/make default |
|---|
| 757 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 758 | :info:build cd graph; /usr/bin/make default |
|---|
| 759 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 760 | :info:build cd ui; /usr/bin/make default |
|---|
| 761 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 762 | :info:build cd cmdio; /usr/bin/make default |
|---|
| 763 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 764 | :info:build cd cmddial; /usr/bin/make default |
|---|
| 765 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 766 | :info:build cd cmdmisc; /usr/bin/make default |
|---|
| 767 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 768 | :info:build cd cmdattr; /usr/bin/make default |
|---|
| 769 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 770 | :info:build cd cmdrep; /usr/bin/make default |
|---|
| 771 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 772 | :info:build cd cmdprop; /usr/bin/make default |
|---|
| 773 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 774 | :info:build cd cmdprim; /usr/bin/make default |
|---|
| 775 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 776 | :info:build cd cmdanim; /usr/bin/make default |
|---|
| 777 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 778 | :info:build cd cmdstruc; /usr/bin/make default |
|---|
| 779 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 780 | :info:build cd cmdcalc; /usr/bin/make default |
|---|
| 781 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 782 | :info:build cd cmdfig; /usr/bin/make default |
|---|
| 783 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 784 | :info:build cd cip; /usr/bin/make default |
|---|
| 785 | :info:build make[4]: Nothing to be done for `default'. |
|---|
| 786 | :info:build cd main; /usr/bin/make default |
|---|
| 787 | :info:build gcc -o molmol -I../../tools/include -I../../sg/include -I../../include -DMAXINT=INT_MAX -I/opt/local/include -bind_at_load -I../.. -O -bind_at_load -Wall MolMol.o MolInit.o ../../lib/libcip.a ../../lib/libcmd.a ../../lib/libui.a ../../lib/libgraph.a ../../lib/libio.a ../../lib/libpu.a ../../lib/libcalc.a ../../lib/libprim.a ../../lib/libdata.a ../../lib/libattr.a ../../lib/libfileio.a ../../lib/libos.a ../../sg/lib/libsg.a ../../tools/lib/libtools.a /opt/local/lib/libtiff.3.dylib /opt/local/lib/libjpeg.dylib /opt/local/lib/libpng.dylib /usr/lib/libz.dylib -L/usr/lib -L/opt/local/lib -lX11 -lXm -lGLU -lGL /System/Library/Frameworks/OpenGL.framework/Libraries/libGL.dylib /opt/local/lib/libGLw.dylib -lXmu -lXt -lXp -lXpm -lX11 -lXext -lSM -lICE -lm -lc -lmx |
|---|
| 788 | :info:build ld: library not found for -lXpm |
|---|
| 789 | :info:build collect2: ld returned 1 exit status |
|---|
| 790 | :info:build make[4]: *** [molmol] Error 1 |
|---|
| 791 | :info:build make[3]: *** [main] Error 2 |
|---|
| 792 | :info:build make[2]: *** [default] Error 2 |
|---|
| 793 | :info:build make[1]: *** [src] Error 2 |
|---|
| 794 | :info:build make: *** [default] Error 2 |
|---|
| 795 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_molmol/work/molmol-2k.2.0" && /usr/bin/make " returned error 2 |
|---|
| 796 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 797 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 798 | while executing |
|---|
| 799 | "command_exec build" |
|---|
| 800 | (procedure "portbuild::build_main" line 8) |
|---|
| 801 | invoked from within |
|---|
| 802 | "$procedure $targetname" |
|---|
| 803 | :info:build Warning: the following items did not execute (for molmol): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 804 | :notice:build Log for molmol is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_molmol/main.log |
|---|
