Ticket #36172: main.log

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.27.1_0 exists in the ports tree
:debug:main pkgconfig 0.27.1_0 +universal is the latest installed
:debug:main pkgconfig 0.27.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port pkgconfig.
:debug:main Requested variant -quartz is not provided by port pkgconfig.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! pkgconfig 0.27.1_0 >= pkgconfig 0.27.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main boost 1.50.0_0 exists in the ports tree
:debug:main boost 1.50.0_0 +no_single+no_static+python27 is the latest installed
:debug:main boost 1.50.0_0 +no_single+no_static+python27 is active
:debug:main Merging existing variants '+no_single+no_static+python27' into variants
:debug:main new fully merged portvariants: no_static + x11 + no_single + quartz - python27 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/boost
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port boost.
:debug:main Requested variant -quartz is not provided by port boost.
:debug:main Executing variant python27 provides python27
:debug:main Executing variant no_static provides no_static
:debug:main Executing variant no_single provides no_single
:debug:main No need to upgrade! boost 1.50.0_0 >= boost 1.50.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 +universal is the latest installed
:debug:main zlib 1.2.7_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port zlib.
:debug:main Requested variant -quartz is not provided by port zlib.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0 +universal is the latest installed
:debug:main expat 2.1.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port expat.
:debug:main Requested variant -quartz is not provided by port expat.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 +universal is the latest installed
:debug:main bzip2 1.0.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port bzip2.
:debug:main Requested variant -quartz is not provided by port bzip2.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 +universal is the latest installed
:debug:main libiconv 1.14_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port libiconv.
:debug:main Requested variant -quartz is not provided by port libiconv.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main icu 4.8.1_0 exists in the ports tree
:debug:main icu 4.8.1_0  is the latest installed
:debug:main icu 4.8.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port icu.
:debug:main Requested variant -quartz is not provided by port icu.
:debug:main No need to upgrade! icu 4.8.1_0 >= icu 4.8.1_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.3_0 exists in the ports tree
:debug:main python27 2.7.3_0 +universal is the latest installed
:debug:main python27 2.7.3_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port python27.
:debug:main Requested variant -quartz is not provided by port python27.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port gettext.
:debug:main Requested variant -quartz is not provided by port gettext.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 +universal is the latest installed
:debug:main ncurses 5.9_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port ncurses.
:debug:main Requested variant -quartz is not provided by port ncurses.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 +universal is the latest installed
:debug:main openssl 1.0.1c_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port openssl.
:debug:main Requested variant -quartz is not provided by port openssl.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.14_1 exists in the ports tree
:debug:main sqlite3 3.7.14_1 +universal is the latest installed
:debug:main sqlite3 3.7.14_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port sqlite3.
:debug:main Requested variant -quartz is not provided by port sqlite3.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1
:debug:main epoch: in tree: 20090923 installed: 20090923
:debug:main libedit 20120601-3.0_0 exists in the ports tree
:debug:main libedit 20120601-3.0_0 +universal is the latest installed
:debug:main libedit 20120601-3.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port libedit.
:debug:main Requested variant -quartz is not provided by port libedit.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +java+universal is the latest installed
:debug:main db46 4.6.21_6 +java+universal is active
:debug:main Merging existing variants '+java+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + java + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant +x11 is not provided by port db46.
:debug:main Requested variant -quartz is not provided by port db46.
:debug:main Executing variant universal provides universal
:debug:main Executing variant java provides java
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_1 exists in the ports tree
:debug:main python_select 0.3_1  is the latest installed
:debug:main python_select 0.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Requested variant +x11 is not provided by port python_select.
:debug:main Requested variant -quartz is not provided by port python_select.
:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main openexr 1.7.0_0 exists in the ports tree
:debug:main openexr 1.7.0_0  is the latest installed
:debug:main openexr 1.7.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openexr
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port openexr.
:debug:main Requested variant -quartz is not provided by port openexr.
:debug:main No need to upgrade! openexr 1.7.0_0 >= openexr 1.7.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ilmbase 1.0.2_0 exists in the ports tree
:debug:main ilmbase 1.0.2_0  is the latest installed
:debug:main ilmbase 1.0.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/ilmbase
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port ilmbase.
:debug:main Requested variant -quartz is not provided by port ilmbase.
:debug:main No need to upgrade! ilmbase 1.0.2_0 >= ilmbase 1.0.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.2.1_0 exists in the ports tree
:debug:main xorg-libsm 1.2.1_0 +universal is the latest installed
:debug:main xorg-libsm 1.2.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libsm.
:debug:main Requested variant -quartz is not provided by port xorg-libsm.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.8_0 exists in the ports tree
:debug:main xorg-libice 1.0.8_0 +universal is the latest installed
:debug:main xorg-libice 1.0.8_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libice.
:debug:main Requested variant -quartz is not provided by port xorg-libice.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice 1.0.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.23_0 exists in the ports tree
:debug:main xorg-xproto 7.0.23_0  is the latest installed
:debug:main xorg-xproto 7.0.23_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant +x11 is not provided by port xorg-xproto.
:debug:main Requested variant -quartz is not provided by port xorg-xproto.
:debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xpm 3.5.10_0 exists in the ports tree
:debug:main xpm 3.5.10_0  is the latest installed
:debug:main xpm 3.5.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xpm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xpm.
:debug:main Requested variant -quartz is not provided by port xpm.
:debug:main No need to upgrade! xpm 3.5.10_0 >= xpm 3.5.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.1.3_0 exists in the ports tree
:debug:main xorg-libXt 1.1.3_0  is the latest installed
:debug:main xorg-libXt 1.1.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libXt.
:debug:main Requested variant -quartz is not provided by port xorg-libXt.
:debug:main No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.5.0_0 exists in the ports tree
:debug:main xorg-libX11 1.5.0_0 +universal is the latest installed
:debug:main xorg-libX11 1.5.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libX11.
:debug:main Requested variant -quartz is not provided by port xorg-libX11.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.1_0 +universal is the latest installed
:debug:main xorg-libXdmcp 1.1.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libXdmcp.
:debug:main Requested variant -quartz is not provided by port xorg-libXdmcp.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.7_0 exists in the ports tree
:debug:main xorg-libXau 1.0.7_0 +universal is the latest installed
:debug:main xorg-libXau 1.0.7_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libXau.
:debug:main Requested variant -quartz is not provided by port xorg-libXau.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
:debug:main xorg-libxcb 1.8.1_2 +python27+universal is the latest installed
:debug:main xorg-libxcb 1.8.1_2 +python27+universal is active
:debug:main Merging existing variants '+python27+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz - python27 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libxcb.
:debug:main Requested variant -quartz is not provided by port xorg-libxcb.
:debug:main Executing variant python27 provides python27
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
:debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: x11 + quartz - python27 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant +x11 is not provided by port xorg-xcb-proto.
:debug:main Requested variant -quartz is not provided by port xorg-xcb-proto.
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto 1.7.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.8.0_0 exists in the ports tree
:debug:main libxml2 2.8.0_0 +universal is the latest installed
:debug:main libxml2 2.8.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port libxml2.
:debug:main Requested variant -quartz is not provided by port libxml2.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xz 5.0.4_0 exists in the ports tree
:debug:main xz 5.0.4_0 +universal is the latest installed
:debug:main xz 5.0.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xz.
:debug:main Requested variant -quartz is not provided by port xz.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant +x11 is not provided by port xorg-libpthread-stubs.
:debug:main Requested variant -quartz is not provided by port xorg-libpthread-stubs.
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.6_0  is the latest installed
:debug:main xorg-kbproto 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant +x11 is not provided by port xorg-kbproto.
:debug:main Requested variant -quartz is not provided by port xorg-kbproto.
:debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.3.1_0 exists in the ports tree
:debug:main xorg-libXext 1.3.1_0 +universal is the latest installed
:debug:main xorg-libXext 1.3.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port xorg-libXext.
:debug:main Requested variant -quartz is not provided by port xorg-libXext.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
:debug:main xorg-xextproto 7.2.1_0  is the latest installed
:debug:main xorg-xextproto 7.2.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Requested variant +x11 is not provided by port xorg-xextproto.
:debug:main Requested variant -quartz is not provided by port xorg-xextproto.
:debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.5.12_0 exists in the ports tree
:debug:main libpng 1.5.12_0 +universal is the latest installed
:debug:main libpng 1.5.12_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port libpng.
:debug:main Requested variant -quartz is not provided by port libpng.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libpng 1.5.12_0 >= libpng 1.5.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8d_0 exists in the ports tree
:debug:main jpeg 8d_0 +universal is the latest installed
:debug:main jpeg 8d_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port jpeg.
:debug:main Requested variant -quartz is not provided by port jpeg.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.5_0 exists in the ports tree
:debug:main tiff 3.9.5_0 +universal is the latest installed
:debug:main tiff 3.9.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal + x11 + quartz -
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Requested variant +x11 is not provided by port tiff.
:debug:main Requested variant -quartz is not provided by port tiff.
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
:msg:main --->  Computing dependencies for povray:msg:main 
:debug:main povray has no conflicts
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: boost
:debug:main Found Dependency: receipt exists for boost
:debug:main Searching for dependency: openexr
:debug:main Found Dependency: receipt exists for openexr
:debug:main Searching for dependency: xorg-libsm
:debug:main Found Dependency: receipt exists for xorg-libsm
:debug:main Searching for dependency: xpm
:debug:main Found Dependency: receipt exists for xpm
:debug:main Searching for dependency: libpng
:debug:main Found Dependency: receipt exists for libpng
:debug:main Searching for dependency: jpeg
:debug:main Found Dependency: receipt exists for jpeg
:debug:main Searching for dependency: zlib
:debug:main Found Dependency: receipt exists for zlib
:debug:main Searching for dependency: tiff
:debug:main Found Dependency: receipt exists for tiff
:debug:main Executing org.macports.main (povray)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 503
:debug:archivefetch archivefetch phase started at Mon Sep 17 13:57:30 CEST 2012
:msg:archivefetch --->  Fetching archive for povray
:debug:archivefetch Executing org.macports.archivefetch (povray)
:debug:archivefetch euid/egid changed to: 0/0
:debug:archivefetch chowned /opt/local/var/macports/incoming to macports
:debug:archivefetch euid/egid changed to: 503/501
:info:archivefetch --->  povray-3.7.0.RC6_0.darwin_10.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
:msg:archivefetch --->  Attempting to fetch povray-3.7.0.RC6_0.darwin_10.x86_64.tbz2 from http://lil.fr.packages.macports.org/povray
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:msg:archivefetch --->  Attempting to fetch povray-3.7.0.RC6_0.darwin_10.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/povray
:debug:archivefetch Fetching archive failed:: couldn't connect to host
:msg:archivefetch --->  Attempting to fetch povray-3.7.0.RC6_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/povray
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:debug:archivefetch Privilege de-escalation not attempted as not running as root.
:debug:fetch fetch phase started at Mon Sep 17 13:58:00 CEST 2012
:notice:fetch --->  Fetching distfiles for povray
:debug:fetch Executing org.macports.fetch (povray)
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Mon Sep 17 13:58:00 CEST 2012
:notice:checksum --->  Verifying checksum(s) for povray
:debug:checksum Executing org.macports.checksum (povray)
:info:checksum --->  Checksumming povray-3.7.0.RC6.tar.gz
:debug:checksum Correct (rmd160) checksum for povray-3.7.0.RC6.tar.gz
:debug:checksum Correct (sha256) checksum for povray-3.7.0.RC6.tar.gz
:debug:checksum Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Mon Sep 17 13:58:01 CEST 2012
:notice:extract --->  Extracting povray
:debug:extract Executing org.macports.extract (povray)
:info:extract --->  Extracting povray-3.7.0.RC6.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/povray/povray-3.7.0.RC6.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/povray/povray-3.7.0.RC6.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/povray/povray-3.7.0.RC6.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - 
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work to macports
:debug:extract euid/egid changed to: 503/501
:debug:extract Privilege de-escalation not attempted as not running as root.
:debug:patch patch phase started at Mon Sep 17 13:58:02 CEST 2012
:debug:patch Executing org.macports.patch (povray)
:notice:patch --->  Applying patches to povray
:info:patch --->  Applying patch-boost-1.50.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/povray/files/patch-boost-1.50.diff'
:info:patch patching file source/backend/scene/view.cpp
:info:patch patching file source/base/timer.cpp
:info:patch patching file vfe/unix/platformbase.cpp
:info:patch patching file vfe/vfepovms.cpp
:info:patch patching file vfe/vfesession.cpp
:info:patch --->  Applying patch-configure-stat.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/povray/files/patch-configure-stat.diff'
:info:patch patching file configure
:info:patch --->  Applying patch-lseek64.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/povray/files/patch-lseek64.diff'
:info:patch patching file source/base/image/image.cpp
:info:patch --->  Applying patch-vfe-uint.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/povray/files/patch-vfe-uint.diff'
:info:patch patching file vfe/unix/vfeplatform.h
:info:patch patching file vfe/vfesession.h
:debug:patch Executing proc-post-org.macports.patch-patch-0
:debug:patch Executing reinplace: /usr/bin/sed s|3.7.0.RC5|3.7.0.RC6|g < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/VERSION >@ file10
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/VERSION to macports
:debug:patch euid/egid changed to: 503/501
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/VERSION
:debug:patch euid/egid changed to: 503/501
:debug:patch Executing reinplace: /usr/bin/sed s|3.7.0.RC5|3.7.0.RC6|g < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/configure >@ file10
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/configure to macports
:debug:patch euid/egid changed to: 503/501
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/configure
:debug:patch euid/egid changed to: 503/501
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Mon Sep 17 13:58:02 CEST 2012
:notice:configure --->  Configuring povray
:debug:configure Using compiler 'Mac OS X gcc 4.2'
:debug:configure Executing org.macports.configure (povray)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' FCFLAGS='-pipe -O2 -m64' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' LIBS='-lboost_system-mt' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' COMPILED_BY='MacPorts'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && ./configure --prefix=/opt/local --with-boost=/opt/local --with-boost-thread --with-libjpeg=/opt/local --with-libpng=/opt/local --with-libsdl=/opt/local --with-libtiff=/opt/local --with-openexr=/opt/local --with-zlib=/opt/local --host=x86_64-apple-darwin10 --build=x86_64-apple-darwin10'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && ./configure --prefix=/opt/local --with-boost=/opt/local --with-boost-thread --with-libjpeg=/opt/local --with-libpng=/opt/local --with-libsdl=/opt/local --with-libtiff=/opt/local --with-openexr=/opt/local --with-zlib=/opt/local --host=x86_64-apple-darwin10 --build=x86_64-apple-darwin10 
:info:configure 
:info:configure ===============================================================================
:info:configure Configure POV-Ray version 3.7.0.RC6
:info:configure ===============================================================================
:info:configure 
:info:configure This is an unofficial version compiled by:
:info:configure  MacPorts
:info:configure The POV-Ray Team(tm) is not responsible for supporting this version.
:info:configure 
:info:configure Environment
:info:configure -----------
:info:configure checking build system type... x86_64-apple-darwin10
:info:configure checking host system type... x86_64-apple-darwin10
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
:info:configure checking for gawk... no
:info:configure checking for mawk... no
:info:configure checking for nawk... no
:info:configure checking for awk... awk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking whether to enable maintainer-specific portions of Makefiles... no
:info:configure checking whether $C_INCLUDE_PATH contains the "." path... no
:info:configure checking whether $CPLUS_INCLUDE_PATH contains the "." path... no
:info:configure 
:info:configure Programs
:info:configure --------
:info:configure checking for x86_64-apple-darwin10-gcc... /usr/bin/gcc-4.2
:info:configure checking whether the C compiler works... yes
:info:configure checking for C compiler default output file name... a.out
:info:configure checking for suffix of executables... 
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
:info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
:info:configure checking for style of include used by make... GNU
:info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3
:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
:info:configure checking for grep that handles long lines and -e... /usr/bin/grep
:info:configure checking for egrep... /usr/bin/grep -E
:info:configure checking for ANSI C header files... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking for stdlib.h... (cached) yes
:info:configure checking whether we are using the GNU C++ compiler... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -g... yes
:info:configure checking dependency style of /usr/bin/g++-4.2... gcc3
:info:configure checking whether the /usr/bin/g++-4.2 compiler works... yes
:info:configure checking how to run the C++ preprocessor... /usr/bin/g++-4.2 -E
:info:configure checking for C++ compiler vendor... gnu
:info:configure checking for /usr/bin/g++-4.2 version... 4.2.1
:info:configure checking for x86_64-apple-darwin10-ranlib... no
:info:configure checking for ranlib... ranlib
:info:configure 
:info:configure Libraries
:info:configure ---------
:info:configure checking whether to link with cygwin DLL... no
:info:configure checking whether to enable static linking... no
:info:configure checking for the pthreads library -lpthreads... no
:info:configure checking whether pthreads work without any flags... yes
:info:configure checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
:info:configure checking if more special flags are required for pthreads... -D_THREAD_SAFE
:info:configure checking for boostlib >= 1.37... yes
:info:configure checking whether the Boost::Thread library is available... yes
:info:configure checking for exit in -lboost_thread-mt... yes
:info:configure checking whether the boost thread library is usable... yes
:info:configure checking for sin in -lmkl... no
:info:configure checking for sin in -lm... yes
:info:configure checking for clock_gettime in -lrt... no
:info:configure checking whether to use the ZLIB library... yes
:info:configure checking for library containing zlibVersion... -lz
:info:configure checking zlib.h usability... yes
:info:configure checking zlib.h presence... yes
:info:configure checking for zlib.h... yes
:info:configure checking for libz version >= 1.2.1... 1.2.7, ok
:info:configure checking whether to use the PNG library... yes
:info:configure checking for library containing png_get_libpng_ver... -lpng14
:info:configure checking png.h usability... yes
:info:configure checking png.h presence... yes
:info:configure checking for png.h... yes
:info:configure checking for libpng version >= 1.2.5... 1.2.12, ok
:info:configure checking whether to use the JPEG library... yes
:info:configure checking for library containing jpeg_std_error... -ljpeg
:info:configure checking jpeglib.h usability... yes
:info:configure checking jpeglib.h presence... yes
:info:configure checking for jpeglib.h... yes
:info:configure checking for libjpeg version >= 6b (62)... 80, ok
:info:configure checking whether to use the TIFF library... yes
:info:configure checking for library containing TIFFGetVersion... -ltiff
:info:configure checking tiffio.h usability... yes
:info:configure checking tiffio.h presence... yes
:info:configure checking for tiffio.h... yes
:info:configure checking for libtiff version >= 3.6.1... 3.9.5, ok
:info:configure checking whether to use the OpenEXR library... yes
:info:configure checking for pkg-config... pkg-config
:info:configure checking for OpenEXR's pkg-config... yes
:info:configure checking for OpenEXR version >= 1.2... 1.7.0, ok
:info:configure checking OpenEXR/ImfCRgbaFile.h usability... yes
:info:configure checking OpenEXR/ImfCRgbaFile.h presence... yes
:info:configure checking for OpenEXR/ImfCRgbaFile.h... yes
:info:configure checking for ImfInputReadPixels in -lIlmImf... yes
:info:configure checking for X... libraries /usr/lib, headers /usr/include
:info:configure checking whether -R must be followed by a space... no
:info:configure checking for gethostbyname... yes
:info:configure checking for connect... yes
:info:configure checking for remove... yes
:info:configure checking for shmat... yes
:info:configure checking for IceConnectionNumber in -lICE... yes
:info:configure checking X11/Xlib.h usability... yes
:info:configure checking X11/Xlib.h presence... yes
:info:configure checking for X11/Xlib.h... yes
:info:configure checking for XFlush in -lX11... yes
:info:configure checking X11/xpm.h usability... yes
:info:configure checking X11/xpm.h presence... yes
:info:configure checking for X11/xpm.h... yes
:info:configure checking for XpmCreatePixmapFromData in -lXpm... yes
:info:configure checking whether to enable the watch cursor... no
:info:configure checking for sdl-config... sdl-config
:info:configure checking for libSDL... yes
:info:configure checking for libSDL version >= 1.2... 1.2.15, ok
:info:configure checking SDL/SDL.h usability... yes
:info:configure checking SDL/SDL.h presence... yes
:info:configure checking for SDL/SDL.h... yes
:info:configure checking for SDL_Quit in -lSDL... yes
:info:configure 
:info:configure Language constructs and functions
:info:configure ---------------------------------
:info:configure checking whether time.h and sys/time.h may both be included... yes
:info:configure checking time.h usability... yes
:info:configure checking time.h presence... yes
:info:configure checking for time.h... yes
:info:configure checking limits.h usability... yes
:info:configure checking limits.h presence... yes
:info:configure checking for limits.h... yes
:info:configure checking sys/resource.h usability... yes
:info:configure checking sys/resource.h presence... yes
:info:configure checking for sys/resource.h... yes
:info:configure checking sys/time.h usability... yes
:info:configure checking sys/time.h presence... yes
:info:configure checking for sys/time.h... yes
:info:configure checking for unistd.h... (cached) yes
:info:configure checking for size_t... yes
:info:configure checking whether struct tm is in sys/time.h or time.h... time.h
:info:configure checking size of int... 4
:info:configure checking size of long int... 8
:info:configure checking size of size_t... 8
:info:configure checking size of float... 4
:info:configure checking for working memcmp... yes
:info:configure checking for vsnprintf... yes
:info:configure checking for getcwd... yes
:info:configure checking for readlink... yes
:info:configure checking for nanosleep... yes
:info:configure checking for clock_gettime... no
:info:configure checking for getrusage... yes
:info:configure checking for gettimeofday... yes
:info:configure checking for asinh... yes
:info:configure 
:info:configure Compiling
:info:configure ---------
:info:configure checking whether to enable pipes for communications... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -pipe... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -Wno-multichar... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -Wno-write-strings... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -fno-enforce-eh-specs... yes
:info:configure checking whether to enable I/O restrictions... yes
:info:configure checking whether to enable debugging... no
:info:configure checking whether to enable profiling... no
:info:configure checking whether to enable stripping... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -s... yes
:info:configure checking whether to enable optimizations... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -O3... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -ffast-math... yes
:info:configure checking whether to enable architecture-specific optimizations... yes
:info:configure checking whether /usr/bin/g++-4.2 accepts -xHost... no
:info:configure checking whether /usr/bin/g++-4.2 accepts -march=native... no
:info:configure checking processor type... 
:info:configure checking whether SSE instruction sets are supported... no
:info:configure checking whether /usr/bin/g++-4.2 accepts -march=i686... no
:info:configure checking whether /usr/bin/g++-4.2 accepts -march=i386... no
:info:configure checking whether /usr/bin/g++-4.2 accepts -mno... no
:info:configure checking which architecture to optimize for... x86_64-apple-darwin10
:info:configure 
:info:configure Makefiles
:info:configure ---------
:info:configure configure: creating ./config.status
:info:configure config.status: creating Makefile
:info:configure config.status: creating source/base/Makefile
:info:configure config.status: creating source/backend/Makefile
:info:configure config.status: creating source/frontend/Makefile
:info:configure config.status: creating source/Makefile
:info:configure config.status: creating vfe/Makefile
:info:configure config.status: creating unix/Makefile
:info:configure config.status: creating config.h
:info:configure config.status: executing depfiles commands
:info:configure 
:info:configure ===============================================================================
:info:configure POV-Ray 3.7.0.RC6 has been configured.
:info:configure 
:info:configure Built-in features:
:info:configure   I/O restrictions:          enabled
:info:configure   X Window display:          enabled (using SDL)
:info:configure   Supported image formats:   gif tga iff ppm pgm hdr png jpeg tiff openexr
:info:configure   Unsupported image formats: -
:info:configure 
:info:configure Compilation settings:
:info:configure   Build architecture:  x86_64-apple-darwin10
:info:configure   Built/Optimized for: x86_64-apple-darwin10
:info:configure   Compiler vendor:     gnu
:info:configure   Compiler version:    g++-4.2 4.2.1
:info:configure   Compiler flags:      -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -pipe -O2 -arch x86_64 -D_THREAD_SAFE
:info:configure 
:info:configure Type 'make check' to build the program and run a test render.
:info:configure Type 'make install' to install POV-Ray on your system.
:info:configure 
:info:configure The POV-Ray components will be installed in the following directories:
:info:configure   Program (executable):       /opt/local/bin
:info:configure   System configuration files: /opt/local/etc/povray/3.7
:info:configure   User configuration files:   /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.home/.povray/3.7
:info:configure   Standard include files:     /opt/local/share/povray-3.7/include
:info:configure   Standard INI files:         /opt/local/share/povray-3.7/ini
:info:configure   Standard demo scene files:  /opt/local/share/povray-3.7/scenes
:info:configure   Documentation (text, HTML): /opt/local/share/doc/povray-3.7
:info:configure   Unix man page:              /opt/local/share/man
:info:configure ===============================================================================
:info:configure 
:debug:configure Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Mon Sep 17 13:58:22 CEST 2012
:notice:build --->  Building povray
:debug:build Executing org.macports.build (povray)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/make -j2 -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/make -j2 -w all 
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6'
:info:build /usr/bin/make  all-recursive
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6'
:info:build Making all in source
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/source'
:info:build Making all in backend
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/source/backend'
:info:build /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I../..  -I../.. -I../../source -I../../source -I../../source/base -I../../unix -I../../vfe -I../../vfe/unix -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -D_THREAD_SAFE -I/opt/local/include/OpenEXR   -I/opt/local/../include -I/opt/local/../include -I/opt/local/../include -I/opt/local/../include -I/opt/local/include -pthread -I/opt/local/include  -I/usr/include  -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -pipe -O2 -arch x86_64 -D_THREAD_SAFE -MT boundingtask.o -MD -MP -MF .deps/boundingtask.Tpo -c -o boundingtask.o `test -f 'bounding/boundingtask.cpp' || echo './'`bounding/boundingtask.cpp
:info:build /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I../..  -I../.. -I../../source -I../../source -I../../source/base -I../../unix -I../../vfe -I../../vfe/unix -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -D_THREAD_SAFE -I/opt/local/include/OpenEXR   -I/opt/local/../include -I/opt/local/../include -I/opt/local/../include -I/opt/local/../include -I/opt/local/include -pthread -I/opt/local/include  -I/usr/include  -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -pipe -O2 -arch x86_64 -D_THREAD_SAFE -MT bcyl.o -MD -MP -MF .deps/bcyl.Tpo -c -o bcyl.o `test -f 'bounding/bcyl.cpp' || echo './'`bounding/bcyl.cpp
:info:build In file included from ../../source/backend/support/taskqueue.h:100,
:info:build                  from ../../source/backend/scene/view.h:101,
:info:build                  from ../../source/backend/bounding/boundingtask.h:102,
:info:build                  from bounding/boundingtask.cpp:102:
:info:build ../../source/backend/support/task.h:187: error: thread-local storage not supported for this target
:info:build mv -f .deps/bcyl.Tpo .deps/bcyl.Po
:info:build /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I../..  -I../.. -I../../source -I../../source -I../../source/base -I../../unix -I../../vfe -I../../vfe/unix -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -D_THREAD_SAFE -I/opt/local/include/OpenEXR   -I/opt/local/../include -I/opt/local/../include -I/opt/local/../include -I/opt/local/../include -I/opt/local/include -pthread -I/opt/local/include  -I/usr/include  -pipe -Wno-multichar -Wno-write-strings -fno-enforce-eh-specs -s -O3 -ffast-math -pipe -O2 -arch x86_64 -D_THREAD_SAFE -MT bbox.o -MD -MP -MF .deps/bbox.Tpo -c -o bbox.o `test -f 'bounding/bbox.cpp' || echo './'`bounding/bbox.cpp
:info:build make[3]: *** [boundingtask.o] Error 1
:info:build make[3]: *** Waiting for unfinished jobs....
:info:build In file included from ../../source/backend/scene/threaddata.h:101,
:info:build                  from bounding/bbox.cpp:107:
:info:build ../../source/backend/support/task.h:187: error: thread-local storage not supported for this target
:info:build make[3]: *** [bbox.o] Error 1
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/source/backend'
:info:build make[2]: *** [all-recursive] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6/source'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6'
:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/work/povray-3.7.0.RC6" && /usr/bin/make -j2 -w all 
:info:build Exit code: 2
:error:build org.macports.build for port povray returned: command execution failed
:debug:build Error code: CHILDSTATUS 60906 2
:debug:build Backtrace: command execution failed
    while executing
"system -nice 0 $fullcmdstring"
    ("eval" body line 1)
    invoked from within
"eval system $notty $nice \$fullcmdstring"
    invoked from within
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: targets not executed for povray: org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Please see the log file for port povray for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_povray/povray/main.log