Ticket #37288: gnuplot_error.log

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0  is the latest installed
:debug:main expat 2.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.10.2_0 exists in the ports tree
:debug:main fontconfig 2.10.2_0  is the latest installed
:debug:main fontconfig 2.10.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! fontconfig 2.10.2_0 >= fontconfig 2.10.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0  is the latest installed
:debug:main libiconv 1.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.4.10_0 exists in the ports tree
:debug:main freetype 2.4.10_0  is the latest installed
:debug:main freetype 2.4.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0  is the latest installed
:debug:main zlib 1.2.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0  is the latest installed
:debug:main bzip2 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gd2 2.0.35_13 exists in the ports tree
:debug:main gd2 2.0.35_13  is the latest installed
:debug:main gd2 2.0.35_13  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gd2
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gd2 2.0.35_13 >= gd2 2.0.35_13
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.5.13_0 exists in the ports tree
:debug:main libpng 1.5.13_0  is the latest installed
:debug:main libpng 1.5.13_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libpng 1.5.13_0 >= libpng 1.5.13_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8d_0 exists in the ports tree
:debug:main jpeg 8d_0  is the latest installed
:debug:main jpeg 8d_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xpm 3.5.10_0 exists in the ports tree
:debug:main xpm 3.5.10_0  is the latest installed
:debug:main xpm 3.5.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xpm
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xpm 3.5.10_0 >= xpm 3.5.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.1.3_0 exists in the ports tree
:debug:main xorg-libXt 1.1.3_0  is the latest installed
:debug:main xorg-libXt 1.1.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.2.1_0 exists in the ports tree
:debug:main xorg-libsm 1.2.1_0  is the latest installed
:debug:main xorg-libsm 1.2.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.8_0 exists in the ports tree
:debug:main xorg-libice 1.0.8_0  is the latest installed
:debug:main xorg-libice 1.0.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice 1.0.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.23_0 exists in the ports tree
:debug:main xorg-xproto 7.0.23_0  is the latest installed
:debug:main xorg-xproto 7.0.23_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.5.0_0 exists in the ports tree
:debug:main xorg-libX11 1.5.0_0  is the latest installed
:debug:main xorg-libX11 1.5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
:debug:main xorg-libXdmcp 1.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.7_0 exists in the ports tree
:debug:main xorg-libXau 1.0.7_0  is the latest installed
:debug:main xorg-libXau 1.0.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
:debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed
:debug:main xorg-libxcb 1.8.1_2 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
:debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto 1.7.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.8.0_0 exists in the ports tree
:debug:main libxml2 2.8.0_0  is the latest installed
:debug:main libxml2 2.8.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xz 5.0.4_0 exists in the ports tree
:debug:main xz 5.0.4_0  is the latest installed
:debug:main xz 5.0.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2  is the latest installed
:debug:main gettext 0.18.1.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1  is the latest installed
:debug:main ncurses 5.9_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.3_1 exists in the ports tree
:debug:main python27 2.7.3_1  is the latest installed
:debug:main python27 2.7.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! python27 2.7.3_1 >= python27 2.7.3_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0  is the latest installed
:debug:main openssl 1.0.1c_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.14.1_0 exists in the ports tree
:debug:main sqlite3 3.7.14.1_0  is the latest installed
:debug:main sqlite3 3.7.14.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.14.1_0 >= sqlite3 3.7.14.1_0
:debug:main epoch: in tree: 20090923 installed: 20090923
:debug:main libedit 20120601-3.0_0 exists in the ports tree
:debug:main libedit 20120601-3.0_0  is the latest installed
:debug:main libedit 20120601-3.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_7 exists in the ports tree
:debug:main db46 4.6.21_7  is the latest installed
:debug:main db46 4.6.21_7  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! db46 4.6.21_7 >= db46 4.6.21_7
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_2 exists in the ports tree
:debug:main python_select 0.3_2  is the latest installed
:debug:main python_select 0.3_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! python_select 0.3_2 >= python_select 0.3_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.6_0  is the latest installed
:debug:main xorg-kbproto 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.3.1_0 exists in the ports tree
:debug:main xorg-libXext 1.3.1_0  is the latest installed
:debug:main xorg-libXext 1.3.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
:debug:main xorg-xextproto 7.2.1_0  is the latest installed
:debug:main xorg-xextproto 7.2.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pdflib 7.0.5_1 exists in the ports tree
:debug:main pdflib 7.0.5_1  is the latest installed
:debug:main pdflib 7.0.5_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/pdflib
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! pdflib 7.0.5_1 >= pdflib 7.0.5_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0  is the latest installed
:debug:main readline 6.2.000_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main aquaterm 1.1.1_0 exists in the ports tree
:debug:main aquaterm 1.1.1_0  is the latest installed
:debug:main aquaterm 1.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/aqua/aquaterm
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcode-1.0.tcl
:debug:main Re-registering default for use_configure
:debug:main Re-registering default for universal_variant
:debug:main Re-registering default for build.type
:debug:main Re-registering default for build.pre_args
:debug:main Re-registering default for build.target
:debug:main Re-registering default for destroot.pre_args
:debug:main Re-registering default for destroot.target
:debug:main Re-registering default for destroot.destdir
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/github-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! aquaterm 1.1.1_0 >= aquaterm 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main lua 5.1.4_4 exists in the ports tree
:debug:main lua 5.1.4_4  is the latest installed
:debug:main lua 5.1.4_4  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/lua
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! lua 5.1.4_4 >= lua 5.1.4_4
:debug:main epoch: in tree: 1 installed: 1
:debug:main pango 1.30.1_3 exists in the ports tree
:debug:main pango 1.30.1_3 +x11 is the latest installed
:debug:main pango 1.30.1_3 +x11 is active
:debug:main Merging existing variants '+x11' into variants
:debug:main new fully merged portvariants: x11 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! pango 1.30.1_3 >= pango 1.30.1_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.34.3_0 exists in the ports tree
:debug:main glib2 2.34.3_0  is the latest installed
:debug:main glib2 2.34.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib2 2.34.3_0 >= glib2 2.34.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libffi 3.0.11_1 exists in the ports tree
:debug:main libffi 3.0.11_1  is the latest installed
:debug:main libffi 3.0.11_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libffi 3.0.11_1 >= libffi 3.0.11_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.4_0 exists in the ports tree
:debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
:debug:main perl5 5.12.4_0 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.4_1 exists in the ports tree
:debug:main perl5.12 5.12.4_1  is the latest installed
:debug:main perl5.12 5.12.4_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.10_2 exists in the ports tree
:debug:main gdbm 1.10_2  is the latest installed
:debug:main gdbm 1.10_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main cairo 1.12.8_2 exists in the ports tree
:debug:main cairo 1.12.8_2 +x11 is the latest installed
:debug:main cairo 1.12.8_2 +x11 is active
:debug:main Merging existing variants '+x11' into variants
:debug:main new fully merged portvariants: x11 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! cairo 1.12.8_2 >= cairo 1.12.8_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpixman 0.28.2_0 exists in the ports tree
:debug:main libpixman 0.28.2_0  is the latest installed
:debug:main libpixman 0.28.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main compiler clang 318.0.61 not blacklisted because does not match {clang < 211.10.1}
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libpixman 0.28.2_0 >= libpixman 0.28.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xrender 0.9.7_0 exists in the ports tree
:debug:main xrender 0.9.7_0  is the latest installed
:debug:main xrender 0.9.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
:debug:main xorg-renderproto 0.11.1_0  is the latest installed
:debug:main xorg-renderproto 0.11.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
:debug:main xorg-xcb-util 0.3.9_0  is the latest installed
:debug:main xorg-xcb-util 0.3.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-util
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util 0.3.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gobject-introspection 1.34.1.1_1 exists in the ports tree
:debug:main gobject-introspection 1.34.1.1_1  is the latest installed
:debug:main gobject-introspection 1.34.1.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gobject-introspection
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gobject-introspection 1.34.1.1_1 >= gobject-introspection 1.34.1.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main Xft2 2.3.1_0 exists in the ports tree
:debug:main Xft2 2.3.1_0  is the latest installed
:debug:main Xft2 2.3.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
:msg:main --->  Computing dependencies for gnuplot:info:main .:debug:main gnuplot has no conflicts
:debug:main Searching for dependency: expat
:debug:main Found Dependency: receipt exists for expat
:debug:main Searching for dependency: fontconfig
:debug:main Found Dependency: receipt exists for fontconfig
:debug:main Searching for dependency: gd2
:debug:main Found Dependency: receipt exists for gd2
:debug:main Searching for dependency: jpeg
:debug:main Found Dependency: receipt exists for jpeg
:debug:main Searching for dependency: pdflib
:debug:main Found Dependency: receipt exists for pdflib
:debug:main Searching for dependency: libiconv
:debug:main Found Dependency: receipt exists for libiconv
:debug:main Searching for dependency: libpng
:debug:main Found Dependency: receipt exists for libpng
:debug:main Searching for dependency: ncurses
:debug:main Found Dependency: receipt exists for ncurses
:debug:main Searching for dependency: readline
:debug:main Found Dependency: receipt exists for readline
:debug:main Searching for dependency: zlib
:debug:main Found Dependency: receipt exists for zlib
:debug:main Searching for dependency: aquaterm
:debug:main Found Dependency: receipt exists for aquaterm
:debug:main Searching for dependency: xpm
:debug:main Found Dependency: receipt exists for xpm
:debug:main Searching for dependency: lua
:debug:main Found Dependency: receipt exists for lua
:debug:main Searching for dependency: pango
:debug:main Found Dependency: receipt exists for pango
:msg:main 
:debug:main Executing org.macports.main (gnuplot)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 502
:debug:main euid changed to: 502
:debug:archivefetch archivefetch phase started at Wed Dec 12 14:03:16 GMT 2012
:msg:archivefetch --->  Fetching archive for gnuplot
:debug:archivefetch Executing org.macports.archivefetch (gnuplot)
:debug:archivefetch euid/egid changed to: 0/0
:debug:archivefetch chowned /opt/local/var/macports/incoming to macports
:debug:archivefetch euid/egid changed to: 502/502
:info:archivefetch --->  gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
:msg:archivefetch --->  Attempting to fetch gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_11.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/gnuplot
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:msg:archivefetch --->  Attempting to fetch gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_11.x86_64.tbz2 from http://lil.fr.packages.macports.org/gnuplot
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:msg:archivefetch --->  Attempting to fetch gnuplot-4.6.1_0+aquaterm+luaterm+pangocairo+x11.darwin_11.x86_64.tbz2 from http://packages.macports.org/gnuplot
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:debug:archivefetch Privilege de-escalation not attempted as not running as root.
:debug:fetch fetch phase started at Wed Dec 12 14:03:26 GMT 2012
:notice:fetch --->  Fetching distfiles for gnuplot
:debug:fetch Executing org.macports.fetch (gnuplot)
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Wed Dec 12 14:03:26 GMT 2012
:notice:checksum --->  Verifying checksum(s) for gnuplot
:debug:checksum Executing org.macports.checksum (gnuplot)
:info:checksum --->  Checksumming gnuplot-4.6.1.tar.gz
:debug:checksum Correct (rmd160) checksum for gnuplot-4.6.1.tar.gz
:debug:checksum Correct (sha256) checksum for gnuplot-4.6.1.tar.gz
:info:checksum --->  Checksumming gnuplot.pdf
:debug:checksum Correct (rmd160) checksum for gnuplot.pdf
:debug:checksum Correct (sha256) checksum for gnuplot.pdf
:debug:checksum Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Wed Dec 12 14:03:26 GMT 2012
:notice:extract --->  Extracting gnuplot
:debug:extract Executing proc-pre-org.macports.extract-extract-0
:debug:extract Executing org.macports.extract (gnuplot)
:info:extract --->  Extracting gnuplot-4.6.1.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/gnuplot/4.6.1/gnuplot-4.6.1.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/gnuplot/4.6.1/gnuplot-4.6.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/gnuplot/4.6.1/gnuplot-4.6.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - 
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work to macports
:debug:extract euid/egid changed to: 502/502
:debug:extract Privilege de-escalation not attempted as not running as root.
:debug:patch patch phase started at Wed Dec 12 14:03:26 GMT 2012
:debug:patch Executing org.macports.patch (gnuplot)
:notice:patch --->  Applying patches to gnuplot
:info:patch --->  Applying patch-src-variable.c.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/gnuplot/files/patch-src-variable.c.diff'
:info:patch patching file src/variable.c
:info:patch --->  Applying patch-docs-Makefile.in.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/gnuplot/files/patch-docs-Makefile.in.diff'
:info:patch patching file docs/Makefile.in
:info:patch --->  Applying patch-upstream-compilerwarnings.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/gnuplot/files/patch-upstream-compilerwarnings.diff'
:info:patch patching file src/color.c
:info:patch patching file src/graphics.c
:info:patch patching file src/plot2d.c
:info:patch patching file src/plot3d.c
:info:patch patching file src/wxterminal/wxt_gui.cpp
:info:patch patching file term/lua.trm
:info:patch patching file term/x11.trm
:info:patch --->  Applying patch-configure-aquaterm.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/gnuplot/files/patch-configure-aquaterm.diff'
:info:patch patching file config.hin
:info:patch patching file configure
:info:patch patching file configure.in
:info:patch patching file m4/apple.m4
:info:patch patching file term/aquaterm.trm
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Wed Dec 12 14:03:27 GMT 2012
:notice:configure --->  Configuring gnuplot
:debug:configure Using compiler 'Mac OS X clang'
:debug:configure Executing org.macports.configure (gnuplot)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && ./configure --prefix=/opt/local --with-readline=/opt/local --with-gd=/opt/local --with-pdf=/opt/local --with-png=/opt/local --enable-datastrings --enable-histograms --infodir='${prefix}/share/info' --mandir='${prefix}/share/man' --without-lisp-files --disable-wxwidgets --without-latex --without-tutorial --with-aquaterm=/opt/local/Library/Frameworks --with-x --with-lua'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && ./configure --prefix=/opt/local --with-readline=/opt/local --with-gd=/opt/local --with-pdf=/opt/local --with-png=/opt/local --enable-datastrings --enable-histograms --infodir='${prefix}/share/info' --mandir='${prefix}/share/man' --without-lisp-files --disable-wxwidgets --without-latex --without-tutorial --with-aquaterm=/opt/local/Library/Frameworks --with-x --with-lua 
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d
:info:configure checking for gawk... gawk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking whether to enable maintainer-specific portions of Makefiles... no
:info:configure checking for style of include used by make... GNU
:info:configure checking for gcc... /usr/bin/clang
:info:configure checking whether the C compiler works... yes
:info:configure checking for C compiler default output file name... a.out
:info:configure checking for suffix of executables... 
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /usr/bin/clang accepts -g... yes
:info:configure checking for /usr/bin/clang option to accept ISO C89... none needed
:info:configure checking dependency style of /usr/bin/clang... gcc3
:info:configure checking how to run the C preprocessor... /usr/bin/clang -E
:info:configure checking for grep that handles long lines and -e... /usr/bin/grep
:info:configure checking for egrep... /usr/bin/grep -E
:info:configure checking for ANSI C header files... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking minix/config.h usability... no
:info:configure checking minix/config.h presence... no
:info:configure checking for minix/config.h... no
:info:configure checking whether it is safe to define __EXTENSIONS__... yes
:info:configure checking for gcc... (cached) /usr/bin/clang
:info:configure checking whether we are using the GNU C compiler... (cached) yes
:info:configure checking whether /usr/bin/clang accepts -g... (cached) yes
:info:configure checking for /usr/bin/clang option to accept ISO C89... (cached) none needed
:info:configure checking dependency style of /usr/bin/clang... (cached) gcc3
:info:configure checking how to run the C preprocessor... /usr/bin/clang -E
:info:configure checking whether we are using the GNU Objective C compiler... yes
:info:configure checking whether /usr/bin/clang accepts -g... yes
:info:configure checking dependency style of /usr/bin/clang... gcc3
:info:configure checking for an ANSI C-conforming const... yes
:info:configure checking for inline... inline
:info:configure checking for preprocessor stringizing operator... yes
:info:configure checking whether ln -s works... yes
:info:configure checking for gcc... (cached) /usr/bin/clang
:info:configure checking whether we are using the GNU C compiler... (cached) yes
:info:configure checking whether /usr/bin/clang accepts -g... (cached) yes
:info:configure checking for /usr/bin/clang option to accept ISO C89... (cached) none needed
:info:configure checking dependency style of /usr/bin/clang... (cached) gcc3
:info:configure checking for emacs... emacs
:info:configure checking for emacs... (cached) emacs
:info:configure checking where .elc files should go... ${datarootdir}/emacs/site-lisp
:info:configure checking for dvips... dvips
:info:configure checking for troff... troff
:info:configure checking for kpsexpand... kpsexpand
:info:configure checking for texhash... texhash
:info:configure checking for X... libraries , headers 
:info:configure checking for gethostbyname... yes
:info:configure checking for connect... yes
:info:configure checking for remove... yes
:info:configure checking for shmat... yes
:info:configure checking for IceConnectionNumber in -lICE... yes
:info:configure checking for MS-DOS/djgpp/libGRX... no
:info:configure checking for NeXT... no
:info:configure checking for Apple Mac OS X... yes
:info:configure checking for AquaTerm/AQTAdapter.h... yes
:info:configure checking for aqtInit in AquaTerm framework... yes
:info:configure checking for BeOS... no
:info:configure checking for Alpha/AXP CPU... no
:info:configure checking for sin... yes
:info:configure checking for ANSI C header files... (cached) yes
:info:configure checking dirent.h usability... yes
:info:configure checking dirent.h presence... yes
:info:configure checking for dirent.h... yes
:info:configure checking errno.h usability... yes
:info:configure checking errno.h presence... yes
:info:configure checking for errno.h... yes
:info:configure checking float.h usability... yes
:info:configure checking float.h presence... yes
:info:configure checking for float.h... yes
:info:configure checking langinfo.h usability... yes
:info:configure checking langinfo.h presence... yes
:info:configure checking for langinfo.h... yes
:info:configure checking limits.h usability... yes
:info:configure checking limits.h presence... yes
:info:configure checking for limits.h... yes
:info:configure checking locale.h usability... yes
:info:configure checking locale.h presence... yes
:info:configure checking for locale.h... yes
:info:configure checking math.h usability... yes
:info:configure checking math.h presence... yes
:info:configure checking for math.h... yes
:info:configure checking for stdlib.h... (cached) yes
:info:configure checking for string.h... (cached) yes
:info:configure checking time.h usability... yes
:info:configure checking time.h presence... yes
:info:configure checking for time.h... yes
:info:configure checking sys/time.h usability... yes
:info:configure checking sys/time.h presence... yes
:info:configure checking for sys/time.h... yes
:info:configure checking for sys/types.h... (cached) yes
:info:configure checking sys/bsdtypes.h usability... no
:info:configure checking sys/bsdtypes.h presence... no
:info:configure checking for sys/bsdtypes.h... no
:info:configure checking sys/ioctl.h usability... yes
:info:configure checking sys/ioctl.h presence... yes
:info:configure checking for sys/ioctl.h... yes
:info:configure checking sys/param.h usability... yes
:info:configure checking sys/param.h presence... yes
:info:configure checking for sys/param.h... yes
:info:configure checking sys/select.h usability... yes
:info:configure checking sys/select.h presence... yes
:info:configure checking for sys/select.h... yes
:info:configure checking sys/socket.h usability... yes
:info:configure checking sys/socket.h presence... yes
:info:configure checking for sys/socket.h... yes
:info:configure checking for sys/stat.h... (cached) yes
:info:configure checking sys/systeminfo.h usability... no
:info:configure checking sys/systeminfo.h presence... no
:info:configure checking for sys/systeminfo.h... no
:info:configure checking sys/timeb.h usability... yes
:info:configure checking sys/timeb.h presence... yes
:info:configure checking for sys/timeb.h... yes
:info:configure checking sys/utsname.h usability... yes
:info:configure checking sys/utsname.h presence... yes
:info:configure checking for sys/utsname.h... yes
:info:configure checking libc.h usability... yes
:info:configure checking libc.h presence... yes
:info:configure checking for libc.h... yes
:info:configure checking malloc.h usability... no
:info:configure checking malloc.h presence... no
:info:configure checking for malloc.h... no
:info:configure checking poll.h usability... yes
:info:configure checking poll.h presence... yes
:info:configure checking for poll.h... yes
:info:configure checking sgtty.h usability... yes
:info:configure checking sgtty.h presence... yes
:info:configure checking for sgtty.h... yes
:info:configure checking termios.h usability... yes
:info:configure checking termios.h presence... yes
:info:configure checking for termios.h... yes
:info:configure checking values.h usability... no
:info:configure checking values.h presence... no
:info:configure checking for values.h... no
:info:configure checking for dirent.h... (cached) yes
:info:configure checking for stdbool.h that conforms to C99... yes
:info:configure checking for _Bool... yes
:info:configure checking for struct exception in math.h... yes
:info:configure checking whether stat file-mode macros are broken... no
:info:configure checking for unistd.h... yes
:info:configure checking if errno variable is declared... yes
:info:configure checking for size_t... yes
:info:configure checking for time_t in time.h... yes
:info:configure checking return type of signal handlers... void
:info:configure checking for atexit... yes
:info:configure checking for memcpy... yes
:info:configure checking for memmove... yes
:info:configure checking for memset... yes
:info:configure checking for on_exit... no
:info:configure checking for bcopy... yes
:info:configure checking for bzero... yes
:info:configure checking for setvbuf... yes
:info:configure checking for strerror... yes
:info:configure checking for strchr... yes
:info:configure checking for strrchr... yes
:info:configure checking for strstr... yes
:info:configure checking for index... yes
:info:configure checking for rindex... yes
:info:configure checking for erf... yes
:info:configure checking for erfc... yes
:info:configure checking for gamma... yes
:info:configure checking for lgamma... yes
:info:configure checking for getcwd... yes
:info:configure checking for poll... yes
:info:configure checking for pclose... yes
:info:configure checking for popen... yes
:info:configure checking for select... yes
:info:configure checking for sleep... yes
:info:configure checking for stpcpy... yes
:info:configure checking for strcspn... yes
:info:configure checking for strdup... yes
:info:configure checking for strndup... yes
:info:configure checking for strnlen... yes
:info:configure checking for strcasecmp... yes
:info:configure checking for stricmp... no
:info:configure checking for strncasecmp... yes
:info:configure checking for strnicmp... no
:info:configure checking for sysinfo... no
:info:configure checking for tcgetattr... yes
:info:configure checking for vfprintf... yes
:info:configure checking for doprnt... no
:info:configure checking for usleep... yes
:info:configure checking for snprintf... yes
:info:configure checking whether signgam is declared... yes
:info:configure checking for sigsetjmp... yes
:info:configure checking if malloc(0) returns 0... no
:info:configure checking for sys/select.h... (cached) yes
:info:configure checking for sys/socket.h... (cached) yes
:info:configure checking types of arguments for select... int,fd_set *,struct timeval *
:info:configure checking for tputs in -lncurses... yes
:info:configure checking for remove_history in -lreadline... yes
:info:configure checking for library containing rl_ding... -lreadline
:info:configure checking for library containing rl_forced_update_display... none required
:info:configure checking for library containing rl_reset_after_signal... none required
:info:configure checking for library containing rl_complete_with_tilde_expansion... none required
:info:configure checking readline/readline.h usability... yes
:info:configure checking readline/readline.h presence... yes
:info:configure checking for readline/readline.h... yes
:info:configure checking readline/history.h usability... yes
:info:configure checking readline/history.h presence... yes
:info:configure checking for readline/history.h... yes
:info:configure checking for deflate in -lz... yes
:info:configure checking zlib.h usability... yes
:info:configure checking zlib.h presence... yes
:info:configure checking for zlib.h... yes
:info:configure checking for gdlib-config... /opt/local/bin/gdlib-config
:info:configure checking for gdImageCreateTrueColor in -lgd... yes
:info:configure checking gd.h usability... yes
:info:configure checking gd.h presence... yes
:info:configure checking for gd.h... yes
:info:configure checking for gdImageGif in -lgd... yes
:info:configure checking for gdImageGifAnimBegin in -lgd... yes
:info:configure checking for gdImageJpeg in -lgd... yes
:info:configure checking for gdImageStringFT in -lgd... yes
:info:configure checking for gdImagePng in -lgd... yes
:info:configure checking for library containing iconv_open... no
:info:configure checking for pdflib-config... /opt/local/bin/pdflib-config
:info:configure checking for PDF_get_majorversion in -lpdf... yes
:info:configure checking pdflib.h usability... yes
:info:configure checking pdflib.h presence... yes
:info:configure checking for pdflib.h... yes
:info:configure checking for PDF_begin_pattern in -lpdf... yes
:info:configure checking for PDF_setdashpattern in -lpdf... yes
:info:configure checking for PDF_begin_document in -lpdf... yes
:info:configure checking for pkg-config... /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.9.0... yes
:info:configure checking for LUA... yes
:info:configure checking lua.h usability... yes
:info:configure checking lua.h presence... yes
:info:configure checking for lua.h... yes
:info:configure checking for multi-byte support in x11... checking for XmbDrawString in -lX11... yes
:info:configure checking for pkg-config... (cached) /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.9.0... yes
:info:configure checking whether we are using the GNU C++ compiler... yes
:info:configure checking whether /usr/bin/clang++ accepts -g... yes
:info:configure checking dependency style of /usr/bin/clang++... gcc3
:info:configure checking how to run the C++ preprocessor... /usr/bin/clang++ -E
:info:configure checking for CAIROPDF... yes
:info:configure checking for CAIROEPS... yes
:info:configure checking that generated files are newer than configure... done
:info:configure configure: creating ./config.status
:info:configure config.status: creating Makefile
:info:configure config.status: creating config/Makefile
:info:configure config.status: creating demo/Makefile
:info:configure config.status: creating docs/Makefile
:info:configure config.status: creating m4/Makefile
:info:configure config.status: creating man/Makefile
:info:configure config.status: creating share/Makefile
:info:configure config.status: creating share/LaTeX/Makefile
:info:configure config.status: creating src/Makefile
:info:configure config.status: creating src/beos/Makefile
:info:configure config.status: creating src/wxterminal/Makefile
:info:configure config.status: creating src/qtterminal/Makefile
:info:configure config.status: creating term/Makefile
:info:configure config.status: creating tutorial/Makefile
:info:configure config.status: creating config.h
:info:configure config.status: executing depfiles commands
:info:configure config.status: executing default commands
:info:configure 
:info:configure ** Configuration summary for gnuplot 4.6.1:
:info:configure 
:info:configure gnuplot will be compiled with the following terminals:
:info:configure 
:info:configure   Standalone terminals: yes (always builtin)
:info:configure     canvas, cgm, context, corel, dumb, dxf, eepic, emf, emtex,
:info:configure     epslatex, fig, gpic, hp2623a, hp2648, hpgl, imagen,
:info:configure     latex, metafont, metapost, mif, pcl5, postscript, pslatex,
:info:configure     pstex, pstricks, qms, regis, svg,
:info:configure     tek40xx, tek410x, texdraw, tgif, tkcanvas, tpic, vttek
:info:configure 
:info:configure   dot-matrix terminals: no
:info:configure     NB: copyright may restrict commercial use
:info:configure     epson, nec, okidata, tandy, and seiko dp414 printers
:info:configure     hp500c, hpdj, hpljii, hppj, pbm, starc
:info:configure 
:info:configure   X Window System terminal: yes
:info:configure     (with multi-byte fonts)
:info:configure     (enable plotting to windows opened by external apps) 
:info:configure     (with application defaults, in /etc/X11/app-defaults/)
:info:configure   jpeg terminal: yes
:info:configure   gif terminal: yes (with animated gif)
:info:configure   png terminal: yes
:info:configure     (jpeg, gif and png terminals can use TTF fonts)
:info:configure   pdf terminal: yes
:info:configure   linux terminal (vga console): no (use --with-linux-vga to enable,
:info:configure                                        requires SVGAlib)
:info:configure   vgagl terminal ((s)vga console): no (use --with-linux-vga to enable,
:info:configure                                        requires SVGAlib with vgagl)
:info:configure   ggi terminal: no (use --with-ggi to enable, requires libggi)
:info:configure   svga terminal (MSDOS/djgpp): no
:info:configure   be terminal (BeOS): no
:info:configure   next terminal: no
:info:configure   aqua terminal: yes
:info:configure   wxt terminal: no (requires C++, wxWidgets>2.6, cairo>0.9, pango>1.10)
:info:configure   cairo-based pdf and png terminals: yes 
:info:configure   lua/TikZ terminal: yes 
:info:configure   Qt terminal: no (requires C++, Qt >= 4.5)
:info:configure 
:info:configure   Additional terminals are availaible in platform-specific makefiles:
:info:configure    cgi (makefile.unx), pm (makefile.os2),
:info:configure    sun (makefile.unx), unixpc (makefile.unx), windows (various Windows
:info:configure    makefiles)
:info:configure 
:info:configure gnuplot will be compiled with the following features:
:info:configure 
:info:configure   Mouse support in interactive terminals: yes
:info:configure   Zooming or refresh of volatile data: yes 
:info:configure   Typing <space> in plot window raises console
:info:configure   Command line macros: yes 
:info:configure   Placement of rectangles and other objects: yes 
:info:configure 
:info:configure gnuplot will be compiled with the following options:
:info:configure 
:info:configure   Readline library: GNU readline library with  -lncurses
:info:configure   Command-line history file: yes
:info:configure   Check current directory for .gnuplot file: no (use --with-cwdrc to enable)
:info:configure   Sort help/subtopic tables by column: no (use --without-row-help to enable)
:info:configure   Use TeX kpsexpand to search for fonts: no (use --with-kpsexpand to enable)
:info:configure   Thin plate splines: no (use --enable-thin-splines to enable)
:info:configure   Hidden3d optimization: quadtree
:info:configure   Deprecated syntax and terminal options: no (use --enable-backwards-compatibility)
:info:configure   Generate statistical summary of data: yes
:info:configure 
:info:configure gnuplot will install the following additional materials:
:info:configure 
:info:configure   gnuplot-mode for X/Emacs: no
:info:configure   LaTeX tutorial: no
:info:configure   cfg file for epslatex terminal: no
:info:configure   TeX *.sty for lua/tikz terminal: no
:info:configure   Help file: yes (always), in ${datarootdir}/gnuplot/4.6/gnuplot.gih
:info:configure   PostScript prologue files: yes (always)
:debug:configure Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Wed Dec 12 14:03:47 GMT 2012
:notice:build --->  Building gnuplot
:debug:build Executing org.macports.build (gnuplot)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/make -j2 -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/make -j2 -w all 
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1'
:info:build /usr/bin/make  all-recursive
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1'
:info:build Making all in config
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/config'
:info:build make[2]: Nothing to be done for `all'.
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/config'
:info:build Making all in m4
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/m4'
:info:build make[2]: Nothing to be done for `all'.
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/m4'
:info:build Making all in term
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/term'
:info:build make[2]: Nothing to be done for `all'.
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/term'
:info:build Making all in src
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src'
:info:build Making all in wxterminal
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src/wxterminal'
:info:build make[3]: Nothing to be done for `all'.
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src/wxterminal'
:info:build Making all in qtterminal
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src/qtterminal'
:info:build make[3]: Nothing to be done for `all'.
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src/qtterminal'
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src'
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT alloc.o -MD -MP -MF .deps/alloc.Tpo -c -o alloc.o alloc.c
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT axis.o -MD -MP -MF .deps/axis.Tpo -c -o axis.o axis.c
:info:build mv -f .deps/alloc.Tpo .deps/alloc.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT binary.o -MD -MP -MF .deps/binary.Tpo -c -o binary.o binary.c
:info:build mv -f .deps/binary.Tpo .deps/binary.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT breaders.o -MD -MP -MF .deps/breaders.Tpo -c -o breaders.o breaders.c
:info:build mv -f .deps/breaders.Tpo .deps/breaders.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
:info:build mv -f .deps/color.Tpo .deps/color.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT command.o -MD -MP -MF .deps/command.Tpo -c -o command.o command.c
:info:build mv -f .deps/axis.Tpo .deps/axis.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT contour.o -MD -MP -MF .deps/contour.Tpo -c -o contour.o contour.c
:info:build mv -f .deps/contour.Tpo .deps/contour.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT datafile.o -MD -MP -MF .deps/datafile.Tpo -c -o datafile.o datafile.c
:info:build mv -f .deps/command.Tpo .deps/command.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT dynarray.o -MD -MP -MF .deps/dynarray.Tpo -c -o dynarray.o dynarray.c
:info:build mv -f .deps/dynarray.Tpo .deps/dynarray.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT eval.o -MD -MP -MF .deps/eval.Tpo -c -o eval.o eval.c
:info:build mv -f .deps/eval.Tpo .deps/eval.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT fit.o -MD -MP -MF .deps/fit.Tpo -c -o fit.o fit.c
:info:build mv -f .deps/fit.Tpo .deps/fit.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT gadgets.o -MD -MP -MF .deps/gadgets.Tpo -c -o gadgets.o gadgets.c
:info:build mv -f .deps/gadgets.Tpo .deps/gadgets.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT getcolor.o -MD -MP -MF .deps/getcolor.Tpo -c -o getcolor.o getcolor.c
:info:build mv -f .deps/getcolor.Tpo .deps/getcolor.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT graph3d.o -MD -MP -MF .deps/graph3d.Tpo -c -o graph3d.o graph3d.c
:info:build mv -f .deps/datafile.Tpo .deps/datafile.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT graphics.o -MD -MP -MF .deps/graphics.Tpo -c -o graphics.o graphics.c
:info:build mv -f .deps/graph3d.Tpo .deps/graph3d.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT help.o -MD -MP -MF .deps/help.Tpo -c -o help.o help.c
:info:build mv -f .deps/help.Tpo .deps/help.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT hidden3d.o -MD -MP -MF .deps/hidden3d.Tpo -c -o hidden3d.o hidden3d.c
:info:build mv -f .deps/hidden3d.Tpo .deps/hidden3d.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT history.o -MD -MP -MF .deps/history.Tpo -c -o history.o history.c
:info:build mv -f .deps/history.Tpo .deps/history.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT internal.o -MD -MP -MF .deps/internal.Tpo -c -o internal.o internal.c
:info:build mv -f .deps/internal.Tpo .deps/internal.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT interpol.o -MD -MP -MF .deps/interpol.Tpo -c -o interpol.o interpol.c
:info:build mv -f .deps/interpol.Tpo .deps/interpol.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT matrix.o -MD -MP -MF .deps/matrix.Tpo -c -o matrix.o matrix.c
:info:build mv -f .deps/matrix.Tpo .deps/matrix.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT misc.o -MD -MP -MF .deps/misc.Tpo -c -o misc.o misc.c
:info:build mv -f .deps/misc.Tpo .deps/misc.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT mouse.o -MD -MP -MF .deps/mouse.Tpo -c -o mouse.o mouse.c
:info:build mv -f .deps/graphics.Tpo .deps/graphics.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT parse.o -MD -MP -MF .deps/parse.Tpo -c -o parse.o parse.c
:info:build mv -f .deps/mouse.Tpo .deps/mouse.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT plot.o -MD -MP -MF .deps/plot.Tpo -c -o plot.o plot.c
:info:build mv -f .deps/parse.Tpo .deps/parse.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT plot2d.o -MD -MP -MF .deps/plot2d.Tpo -c -o plot2d.o plot2d.c
:info:build mv -f .deps/plot.Tpo .deps/plot.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT plot3d.o -MD -MP -MF .deps/plot3d.Tpo -c -o plot3d.o plot3d.c
:info:build mv -f .deps/plot3d.Tpo .deps/plot3d.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT pm3d.o -MD -MP -MF .deps/pm3d.Tpo -c -o pm3d.o pm3d.c
:info:build mv -f .deps/pm3d.Tpo .deps/pm3d.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT readline.o -MD -MP -MF .deps/readline.Tpo -c -o readline.o readline.c
:info:build mv -f .deps/readline.Tpo .deps/readline.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT save.o -MD -MP -MF .deps/save.Tpo -c -o save.o save.c
:info:build mv -f .deps/plot2d.Tpo .deps/plot2d.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT scanner.o -MD -MP -MF .deps/scanner.Tpo -c -o scanner.o scanner.c
:info:build mv -f .deps/scanner.Tpo .deps/scanner.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT set.o -MD -MP -MF .deps/set.Tpo -c -o set.o set.c
:info:build mv -f .deps/save.Tpo .deps/save.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT show.o -MD -MP -MF .deps/show.Tpo -c -o show.o show.c
:info:build mv -f .deps/show.Tpo .deps/show.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT specfun.o -MD -MP -MF .deps/specfun.Tpo -c -o specfun.o specfun.c
:info:build mv -f .deps/specfun.Tpo .deps/specfun.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT standard.o -MD -MP -MF .deps/standard.Tpo -c -o standard.o standard.c
:info:build mv -f .deps/standard.Tpo .deps/standard.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT stats.o -MD -MP -MF .deps/stats.Tpo -c -o stats.o stats.c
:info:build mv -f .deps/stats.Tpo .deps/stats.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT stdfn.o -MD -MP -MF .deps/stdfn.Tpo -c -o stdfn.o stdfn.c
:info:build mv -f .deps/stdfn.Tpo .deps/stdfn.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT tables.o -MD -MP -MF .deps/tables.Tpo -c -o tables.o tables.c
:info:build mv -f .deps/tables.Tpo .deps/tables.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT tabulate.o -MD -MP -MF .deps/tabulate.Tpo -c -o tabulate.o tabulate.c
:info:build mv -f .deps/tabulate.Tpo .deps/tabulate.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT term.o -MD -MP -MF .deps/term.Tpo -c -o term.o term.c
:info:build In file included from term.c:1405:
:info:build In file included from ./term.h:163:
:info:build ../term/aquaterm.trm:331:25: warning: 'stringWithCString:' is deprecated [-Wdeprecated-declarations]
:info:build     translatedString = [NSString stringWithCString:string];
:info:build                         ^
:info:build mv -f .deps/set.Tpo .deps/set.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT time.o -MD -MP -MF .deps/time.Tpo -c -o time.o time.c
:info:build mv -f .deps/time.Tpo .deps/time.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT unset.o -MD -MP -MF .deps/unset.Tpo -c -o unset.o unset.c
:info:build mv -f .deps/unset.Tpo .deps/unset.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
:info:build util.c:509:10: warning: 'sprintf' macro redefined
:info:build # define sprintf(str,fmt,arg) \
:info:build          ^
:info:build /usr/include/secure/_stdio.h:49:9: note: previous definition is here
:info:build #define sprintf(str, ...) \
:info:build         ^
:info:build 1 warning generated.
:info:build mv -f .deps/util.Tpo .deps/util.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT util3d.o -MD -MP -MF .deps/util3d.Tpo -c -o util3d.o util3d.c
:info:build mv -f .deps/util3d.Tpo .deps/util3d.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT variable.o -MD -MP -MF .deps/variable.Tpo -c -o variable.o variable.c
:info:build mv -f .deps/variable.Tpo .deps/variable.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT version.o -MD -MP -MF .deps/version.Tpo -c -o version.o version.c
:info:build mv -f .deps/version.Tpo .deps/version.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT gp_cairo.o -MD -MP -MF .deps/gp_cairo.Tpo -c -o gp_cairo.o `test -f 'wxterminal/gp_cairo.c' || echo './'`wxterminal/gp_cairo.c
:info:build mv -f .deps/gp_cairo.Tpo .deps/gp_cairo.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT gp_cairo_helpers.o -MD -MP -MF .deps/gp_cairo_helpers.Tpo -c -o gp_cairo_helpers.o `test -f 'wxterminal/gp_cairo_helpers.c' || echo './'`wxterminal/gp_cairo_helpers.c
:info:build mv -f .deps/gp_cairo_helpers.Tpo .deps/gp_cairo_helpers.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT bf_test.o -MD -MP -MF .deps/bf_test.Tpo -c -o bf_test.o bf_test.c
:info:build mv -f .deps/bf_test.Tpo .deps/bf_test.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT gplt_x11.o -MD -MP -MF .deps/gplt_x11.Tpo -c -o gplt_x11.o gplt_x11.c
:info:build gplt_x11.c:4562:11: warning: 'XKeycodeToKeysym' is deprecated [-Wdeprecated-declarations]
:info:build         keysym = XKeycodeToKeysym(dpy, event->xkey.keycode, 0);
:info:build                  ^
:info:build 1 warning generated.
:info:build mv -f .deps/gplt_x11.Tpo .deps/gplt_x11.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -MT gpexecute.o -MD -MP -MF .deps/gpexecute.Tpo -c -o gpexecute.o gpexecute.c
:info:build mv -f .deps/gpexecute.Tpo .deps/gpexecute.Po
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I..  -I../term -I../term -DBINDIR=\"/opt/local/bin\" -DX11_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DQT_DRIVER_DIR=\"/opt/local/libexec/gnuplot/4.6\" -DGNUPLOT_SHARE_DIR=\"/opt/local/share/gnuplot/4.6\" -DGNUPLOT_PS_DIR=\"/opt/local/share/gnuplot/4.6/PostScript\" -DGNUPLOT_JS_DIR=\"/opt/local/share/gnuplot/4.6/js\" -DGNUPLOT_LUA_DIR=\"/opt/local/share/gnuplot/4.6/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/opt/local/share/gnuplot/4.6/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's,x,x,'`\" -DXAPPLRESDIR=\"/etc/X11/app-defaults/\"  -I/opt/local/include  -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include   -D_REENTRANT -I/opt/local/include/cairo -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/pango-1.0    -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks -c -DGPLT_X11_MODE -o getcolor_x11.o ./getcolor.c
:info:build /usr/bin/clang  -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks  -L/opt/local/lib -arch x86_64 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -o bf_test bf_test.o binary.o alloc.o  -framework Foundation -framework AquaTerm -F/opt/local/Library/Frameworks -L/opt/local/lib -lz -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpango-1.0 -lm -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lintl  
:info:build ld: warning: ignoring file /Library/Frameworks//Foundation.framework/Foundation, missing required architecture x86_64 in file
:info:build /usr/bin/clang  -pipe -O2 -arch x86_64 -ObjC -F/opt/local/Library/Frameworks  -L/opt/local/lib -arch x86_64 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -o gnuplot_x11 gplt_x11.o gpexecute.o version.o getcolor_x11.o -lX11  -framework Foundation -framework AquaTerm -F/opt/local/Library/Frameworks -L/opt/local/lib -lz -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpango-1.0 -lm -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lintl  
:info:build ld: warning: ignoring file /Library/Frameworks//Foundation.framework/Foundation, missing required architecture x86_64 in file
:info:build 1 warning generated.
:info:build mv -f .deps/term.Tpo .deps/term.Po
:info:build /usr/bin/clang++  -pipe -O2 -arch x86_64  -L/opt/local/lib -arch x86_64 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -o gnuplot alloc.o axis.o binary.o breaders.o color.o command.o contour.o datafile.o dynarray.o eval.o fit.o gadgets.o getcolor.o graph3d.o graphics.o help.o hidden3d.o history.o internal.o interpol.o matrix.o misc.o mouse.o parse.o plot.o plot2d.o plot3d.o pm3d.o readline.o save.o scanner.o set.o show.o specfun.o standard.o stats.o stdfn.o tables.o tabulate.o term.o time.o unset.o util.o util3d.o variable.o version.o  gp_cairo.o gp_cairo_helpers.o    -lreadline  -lncurses  -lz -lgd -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng -lz -liconv -ljpeg -lfreetype -lpng -lpdf -L/opt/local/lib -llua -lm      -framework Foundation -framework AquaTerm -F/opt/local/Library/Frameworks -L/opt/local/lib -lz -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpango-1.0 -lm -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lintl  
:info:build ld: warning: ignoring file /Library/Frameworks//Foundation.framework/Foundation, missing required architecture x86_64 in file
:info:build Undefined symbols for architecture x86_64:
:info:build   "_objc_msgSend", referenced from:
:info:build       _AQUA_init in term.o
:info:build       _AQUA_text in term.o
:info:build       _AQUA_graphics in term.o
:info:build       _AQUA_move in term.o
:info:build       _AQUA_vector in term.o
:info:build       _AQUA_linetype in term.o
:info:build       _AQUA_put_text in term.o
:info:build       ...
:info:build   "_NSLog", referenced from:
:info:build       _AQUA_image in term.o
:info:build   "_OBJC_CLASS_$_NSAttributedString", referenced from:
:info:build       objc-class-ref in term.o
:info:build   "_objc_msgSend_fixup", referenced from:
:info:build       l_objc_msgSend_fixup_alloc in term.o
:info:build       l_objc_msgSend_fixup_release in term.o
:info:build       l_objc_msgSend_fixup_respondsToSelector_ in term.o
:info:build       l_objc_msgSend_fixup_count in term.o
:info:build       l_objc_msgSend_fixup_objectAtIndex_ in term.o
:info:build       l_objc_msgSend_fixup_isEqualToString_ in term.o
:info:build   "_OBJC_CLASS_$_NSString", referenced from:
:info:build       objc-class-ref in term.o
:info:build   "___CFConstantStringClassReference", referenced from:
:info:build       CFString in term.o
:info:build       CFString in term.o
:info:build       CFString in term.o
:info:build       CFString in term.o
:info:build       CFString in term.o
:info:build       CFString in term.o
:info:build       CFString in term.o
:info:build       ...
:info:build   "_OBJC_CLASS_$_NSMutableDictionary", referenced from:
:info:build       objc-class-ref in term.o
:info:build   "_OBJC_CLASS_$_NSNumber", referenced from:
:info:build       objc-class-ref in term.o
:info:build   "_OBJC_CLASS_$_NSAutoreleasePool", referenced from:
:info:build       objc-class-ref in term.o
:info:build   "_OBJC_CLASS_$_NSMutableAttributedString", referenced from:
:info:build       objc-class-ref in term.o
:info:build ld: symbol(s) not found for architecture x86_64
:info:build clang: error: linker command failed with exit code 1 (use -v to see invocation)
:info:build make[3]: *** [gnuplot] Error 1
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src'
:info:build make[2]: *** [all-recursive] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1/src'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1'
:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/work/gnuplot-4.6.1" && /usr/bin/make -j2 -w all 
:info:build Exit code: 2
:error:build org.macports.build for port gnuplot returned: command execution failed
:debug:build Error code: CHILDSTATUS 22601 2
:debug:build Backtrace: command execution failed
    while executing
"system -nice 0 $fullcmdstring"
    ("eval" body line 1)
    invoked from within
"eval system $notty $nice \$fullcmdstring"
    invoked from within
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: targets not executed for gnuplot: org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Please see the log file for port gnuplot for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gnuplot/gnuplot/main.log