Ticket #38425: macports-dvdisaster.log

File macports-dvdisaster.log, 84.9 KB (added by xanda-escuyer (xanda), 11 years ago)
Line 
1version:1
2:debug:main epoch: in tree: 0 installed: 0
3:debug:main pkgconfig 0.27.1_2 exists in the ports tree
4:debug:main pkgconfig 0.27.1_2  is the latest installed
5:debug:main pkgconfig 0.27.1_2  is active
6:debug:main Merging existing variants '' into variants
7:debug:main new fully merged portvariants:
8:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
9:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
10:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
12:debug:main adding the default universal variant
13:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
14:debug:main No need to upgrade! pkgconfig 0.27.1_2 >= pkgconfig 0.27.1_2
15:debug:main epoch: in tree: 0 installed: 0
16:debug:main libiconv 1.14_0 exists in the ports tree
17:debug:main libiconv 1.14_0  is the latest installed
18:debug:main libiconv 1.14_0  is active
19:debug:main Merging existing variants '' into variants
20:debug:main new fully merged portvariants:
21:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
22:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
23:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
24:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
25:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
26:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
27:debug:main universal variant already exists, so not adding the default one
28:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
29:debug:main epoch: in tree: 0 installed: 0
30:debug:main gtk2 2.24.16_0 exists in the ports tree
31:debug:main gtk2 2.24.16_0 +x11 is the latest installed
32:debug:main gtk2 2.24.16_0 +x11 is active
33:debug:main Merging existing variants '+x11' into variants
34:debug:main new fully merged portvariants: x11 +
35:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
36:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
37:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
38:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
39:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
40:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
41:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
42:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
43:debug:main universal variant already exists, so not adding the default one
44:debug:main Executing variant x11 provides x11
45:debug:main No need to upgrade! gtk2 2.24.16_0 >= gtk2 2.24.16_0
46:debug:main epoch: in tree: 2 installed: 2
47:debug:main atk 2.6.0_0 exists in the ports tree
48:debug:main atk 2.6.0_0  is the latest installed
49:debug:main atk 2.6.0_0  is active
50:debug:main Merging existing variants '' into variants
51:debug:main new fully merged portvariants:
52:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
53:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
54:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
55:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
56:debug:main adding the default universal variant
57:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
58:debug:main No need to upgrade! atk 2.6.0_0 >= atk 2.6.0_0
59:debug:main epoch: in tree: 0 installed: 0
60:debug:main glib2 2.34.3_0 exists in the ports tree
61:debug:main glib2 2.34.3_0  is the latest installed
62:debug:main glib2 2.34.3_0  is active
63:debug:main Merging existing variants '' into variants
64:debug:main new fully merged portvariants:
65:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
66:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
67:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
68:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
69:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
70:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
71:debug:main adding the default universal variant
72:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
73:debug:main No need to upgrade! glib2 2.34.3_0 >= glib2 2.34.3_0
74:debug:main epoch: in tree: 0 installed: 0
75:debug:main gettext 0.18.2.1_0 exists in the ports tree
76:debug:main gettext 0.18.2.1_0  is the latest installed
77:debug:main gettext 0.18.2.1_0  is active
78:debug:main Merging existing variants '' into variants
79:debug:main new fully merged portvariants:
80:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
81:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
82:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
83:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
84:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
85:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
86:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
87:debug:main compiler clang blacklisted because not installed
88:debug:main universal variant already exists, so not adding the default one
89:debug:main No need to upgrade! gettext 0.18.2.1_0 >= gettext 0.18.2.1_0
90:debug:main epoch: in tree: 0 installed: 0
91:debug:main expat 2.1.0_0 exists in the ports tree
92:debug:main expat 2.1.0_0  is the latest installed
93:debug:main expat 2.1.0_0  is active
94:debug:main Merging existing variants '' into variants
95:debug:main new fully merged portvariants:
96:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
97:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
98:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
99:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
100:debug:main adding the default universal variant
101:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
102:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
103:debug:main epoch: in tree: 0 installed: 0
104:debug:main ncurses 5.9_2 exists in the ports tree
105:debug:main ncurses 5.9_2  is the latest installed
106:debug:main ncurses 5.9_2  is active
107:debug:main Merging existing variants '' into variants
108:debug:main new fully merged portvariants:
109:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
110:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
111:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
112:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
113:debug:main adding the default universal variant
114:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
115:debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2
116:debug:main epoch: in tree: 0 installed: 0
117:debug:main zlib 1.2.7_0 exists in the ports tree
118:debug:main zlib 1.2.7_0  is the latest installed
119:debug:main zlib 1.2.7_0  is active
120:debug:main Merging existing variants '' into variants
121:debug:main new fully merged portvariants:
122:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
123:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
124:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
125:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
126:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
127:debug:main adding the default universal variant
128:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
129:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
130:debug:main epoch: in tree: 0 installed: 0
131:debug:main libffi 3.0.11_1 exists in the ports tree
132:debug:main libffi 3.0.11_1  is the latest installed
133:debug:main libffi 3.0.11_1  is active
134:debug:main Merging existing variants '' into variants
135:debug:main new fully merged portvariants:
136:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
137:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
138:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
139:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
140:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
141:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
142:debug:main universal variant already exists, so not adding the default one
143:debug:main No need to upgrade! libffi 3.0.11_1 >= libffi 3.0.11_1
144:debug:main epoch: in tree: 0 installed: 0
145:debug:main perl5 5.12.4_0 exists in the ports tree
146:debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
147:debug:main perl5 5.12.4_0 +perl5_12 is active
148:debug:main Merging existing variants '+perl5_12' into variants
149:debug:main new fully merged portvariants: perl5_12 +
150:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
151:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
152:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
153:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
154:debug:main universal_variant is false, so not adding the default universal variant
155:debug:main Executing variant perl5_12 provides perl5_12
156:debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
157:debug:main epoch: in tree: 0 installed: 0
158:debug:main perl5.12 5.12.4_1 exists in the ports tree
159:debug:main perl5.12 5.12.4_1  is the latest installed
160:debug:main perl5.12 5.12.4_1  is active
161:debug:main Merging existing variants '' into variants
162:debug:main new fully merged portvariants:
163:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
164:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
165:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
166:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
167:debug:main adding the default universal variant
168:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
169:debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1
170:debug:main epoch: in tree: 0 installed: 0
171:debug:main gdbm 1.10_2 exists in the ports tree
172:debug:main gdbm 1.10_2  is the latest installed
173:debug:main gdbm 1.10_2  is active
174:debug:main Merging existing variants '' into variants
175:debug:main new fully merged portvariants:
176:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
177:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
178:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
179:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
180:debug:main adding the default universal variant
181:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
182:debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
183:debug:main epoch: in tree: 0 installed: 0
184:debug:main gobject-introspection 1.34.2_0 exists in the ports tree
185:debug:main gobject-introspection 1.34.2_0  is the latest installed
186:debug:main gobject-introspection 1.34.2_0  is active
187:debug:main Merging existing variants '' into variants
188:debug:main new fully merged portvariants:
189:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gobject-introspection
190:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
191:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
192:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
193:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
194:debug:main python27 is installed with the following variants:
195:debug:main   required: ucs4, forbidden:
196:debug:main   rejected, because required variant ucs4 is missing
197:debug:main adding the default universal variant
198:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
199:debug:main No need to upgrade! gobject-introspection 1.34.2_0 >= gobject-introspection 1.34.2_0
200:debug:main epoch: in tree: 0 installed: 0
201:debug:main cairo 1.12.14_0 exists in the ports tree
202:debug:main cairo 1.12.14_0 +x11 is the latest installed
203:debug:main cairo 1.12.14_0 +x11 is active
204:debug:main Merging existing variants '+x11' into variants
205:debug:main new fully merged portvariants: x11 +
206:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
207:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
208:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
209:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
210:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
211:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
212:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
213:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
214:debug:main compiler clang blacklisted because not installed
215:debug:main universal variant already exists, so not adding the default one
216:debug:main Executing variant x11 provides x11
217:debug:main No need to upgrade! cairo 1.12.14_0 >= cairo 1.12.14_0
218:debug:main epoch: in tree: 0 installed: 0
219:debug:main libpixman 0.28.2_0 exists in the ports tree
220:debug:main libpixman 0.28.2_0  is the latest installed
221:debug:main libpixman 0.28.2_0  is active
222:debug:main Merging existing variants '' into variants
223:debug:main new fully merged portvariants:
224:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
225:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
226:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
227:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
228:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
229:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
230:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
231:debug:main compiler clang blacklisted because not installed
232:debug:main universal variant already exists, so not adding the default one
233:debug:main No need to upgrade! libpixman 0.28.2_0 >= libpixman 0.28.2_0
234:debug:main epoch: in tree: 0 installed: 0
235:debug:main fontconfig 2.10.2_0 exists in the ports tree
236:debug:main fontconfig 2.10.2_0  is the latest installed
237:debug:main fontconfig 2.10.2_0  is active
238:debug:main Merging existing variants '' into variants
239:debug:main new fully merged portvariants:
240:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
241:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
242:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
243:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
244:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
245:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
246:debug:main universal variant already exists, so not adding the default one
247:debug:main No need to upgrade! fontconfig 2.10.2_0 >= fontconfig 2.10.2_0
248:debug:main epoch: in tree: 0 installed: 0
249:debug:main freetype 2.4.10_0 exists in the ports tree
250:debug:main freetype 2.4.10_0  is the latest installed
251:debug:main freetype 2.4.10_0  is active
252:debug:main Merging existing variants '' into variants
253:debug:main new fully merged portvariants:
254:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
255:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
256:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
257:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
258:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
259:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
260:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
261:debug:main universal variant already exists, so not adding the default one
262:debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
263:debug:main epoch: in tree: 0 installed: 0
264:debug:main bzip2 1.0.6_0 exists in the ports tree
265:debug:main bzip2 1.0.6_0  is the latest installed
266:debug:main bzip2 1.0.6_0  is active
267:debug:main Merging existing variants '' into variants
268:debug:main new fully merged portvariants:
269:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
270:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
271:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
272:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
273:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
274:debug:main universal variant already exists, so not adding the default one
275:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
276:debug:main epoch: in tree: 0 installed: 0
277:debug:main libpng 1.5.14_0 exists in the ports tree
278:debug:main libpng 1.5.14_0  is the latest installed
279:debug:main libpng 1.5.14_0  is active
280:debug:main Merging existing variants '' into variants
281:debug:main new fully merged portvariants:
282:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
283:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
284:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
285:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
286:debug:main adding the default universal variant
287:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
288:debug:main No need to upgrade! libpng 1.5.14_0 >= libpng 1.5.14_0
289:debug:main epoch: in tree: 0 installed: 0
290:debug:main lzo2 2.06_0 exists in the ports tree
291:debug:main lzo2 2.06_0  is the latest installed
292:debug:main lzo2 2.06_0  is active
293:debug:main Merging existing variants '' into variants
294:debug:main new fully merged portvariants:
295:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2
296:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
297:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
298:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
299:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
300:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
301:debug:main universal variant already exists, so not adding the default one
302:debug:main No need to upgrade! lzo2 2.06_0 >= lzo2 2.06_0
303:debug:main epoch: in tree: 0 installed: 0
304:debug:main xrender 0.9.7_0 exists in the ports tree
305:debug:main xrender 0.9.7_0  is the latest installed
306:debug:main xrender 0.9.7_0  is active
307:debug:main Merging existing variants '' into variants
308:debug:main new fully merged portvariants:
309:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
310:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
311:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
312:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
313:debug:main adding the default universal variant
314:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
315:debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
316:debug:main epoch: in tree: 0 installed: 0
317:debug:main xorg-libX11 1.5.0_0 exists in the ports tree
318:debug:main xorg-libX11 1.5.0_0  is the latest installed
319:debug:main xorg-libX11 1.5.0_0  is active
320:debug:main Merging existing variants '' into variants
321:debug:main new fully merged portvariants:
322:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11
323:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
324:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
325:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
326:debug:main adding the default universal variant
327:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
328:debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
329:debug:main epoch: in tree: 0 installed: 0
330:debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
331:debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
332:debug:main xorg-libXdmcp 1.1.1_0  is active
333:debug:main Merging existing variants '' into variants
334:debug:main new fully merged portvariants:
335:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp
336:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
337:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
338:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
339:debug:main adding the default universal variant
340:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
341:debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
342:debug:main epoch: in tree: 0 installed: 0
343:debug:main xorg-libXau 1.0.7_0 exists in the ports tree
344:debug:main xorg-libXau 1.0.7_0  is the latest installed
345:debug:main xorg-libXau 1.0.7_0  is active
346:debug:main Merging existing variants '' into variants
347:debug:main new fully merged portvariants:
348:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau
349:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
350:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
351:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
352:debug:main adding the default universal variant
353:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
354:debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
355:debug:main epoch: in tree: 0 installed: 0
356:debug:main xorg-xproto 7.0.23_0 exists in the ports tree
357:debug:main xorg-xproto 7.0.23_0  is the latest installed
358:debug:main xorg-xproto 7.0.23_0  is active
359:debug:main Merging existing variants '' into variants
360:debug:main new fully merged portvariants:
361:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto
362:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
363:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
364:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
365:debug:main only one arch supported, so not adding the default universal variant
366:debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
367:debug:main epoch: in tree: 0 installed: 0
368:debug:main xorg-libxcb 1.9_0 exists in the ports tree
369:debug:main xorg-libxcb 1.9_0 +python27 is the latest installed
370:debug:main xorg-libxcb 1.9_0 +python27 is active
371:debug:main Merging existing variants '+python27' into variants
372:debug:main new fully merged portvariants: python27 +
373:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb
374:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
375:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
376:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
377:debug:main adding the default universal variant
378:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
379:debug:main Executing variant python27 provides python27
380:debug:main No need to upgrade! xorg-libxcb 1.9_0 >= xorg-libxcb 1.9_0
381:debug:main epoch: in tree: 0 installed: 0
382:debug:main xorg-xcb-proto 1.8_0 exists in the ports tree
383:debug:main xorg-xcb-proto 1.8_0 +python27 is the latest installed
384:debug:main xorg-xcb-proto 1.8_0 +python27 is active
385:debug:main Merging existing variants '+python27' into variants
386:debug:main new fully merged portvariants: python27 +
387:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto
388:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
389:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
390:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
391:debug:main only one arch supported, so not adding the default universal variant
392:debug:main Executing variant python27 provides python27
393:debug:main No need to upgrade! xorg-xcb-proto 1.8_0 >= xorg-xcb-proto 1.8_0
394:debug:main epoch: in tree: 0 installed: 0
395:debug:main libxml2 2.8.0_0 exists in the ports tree
396:debug:main libxml2 2.8.0_0  is the latest installed
397:debug:main libxml2 2.8.0_0  is active
398:debug:main Merging existing variants '' into variants
399:debug:main new fully merged portvariants:
400:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
401:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
402:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
403:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
404:debug:main adding the default universal variant
405:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
406:debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
407:debug:main epoch: in tree: 0 installed: 0
408:debug:main xz 5.0.4_0 exists in the ports tree
409:debug:main xz 5.0.4_0  is the latest installed
410:debug:main xz 5.0.4_0  is active
411:debug:main Merging existing variants '' into variants
412:debug:main new fully merged portvariants:
413:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
414:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
415:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
416:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
417:debug:main adding the default universal variant
418:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
419:debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
420:debug:main epoch: in tree: 2 installed: 2
421:debug:main python27 2.7.3_1 exists in the ports tree
422:debug:main python27 2.7.3_1  is the latest installed
423:debug:main python27 2.7.3_1  is active
424:debug:main Merging existing variants '' into variants
425:debug:main new fully merged portvariants:
426:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
427:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
428:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
429:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
430:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
431:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
432:debug:main universal variant already exists, so not adding the default one
433:debug:main No need to upgrade! python27 2.7.3_1 >= python27 2.7.3_1
434:debug:main epoch: in tree: 1 installed: 1
435:debug:main openssl 1.0.1e_1 exists in the ports tree
436:debug:main openssl 1.0.1e_1  is the latest installed
437:debug:main openssl 1.0.1e_1  is active
438:debug:main Merging existing variants '' into variants
439:debug:main new fully merged portvariants:
440:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
441:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
442:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
443:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
444:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
445:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
446:debug:main universal variant already exists, so not adding the default one
447:debug:main No need to upgrade! openssl 1.0.1e_1 >= openssl 1.0.1e_1
448:debug:main epoch: in tree: 0 installed: 0
449:debug:main sqlite3 3.7.15.2_0 exists in the ports tree
450:debug:main sqlite3 3.7.15.2_0  is the latest installed
451:debug:main sqlite3 3.7.15.2_0  is active
452:debug:main Merging existing variants '' into variants
453:debug:main new fully merged portvariants:
454:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
455:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
456:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
457:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
458:debug:main adding the default universal variant
459:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
460:debug:main No need to upgrade! sqlite3 3.7.15.2_0 >= sqlite3 3.7.15.2_0
461:debug:main epoch: in tree: 20090923 installed: 20090923
462:debug:main libedit 20121213-3.0_0 exists in the ports tree
463:debug:main libedit 20121213-3.0_0  is the latest installed
464:debug:main libedit 20121213-3.0_0  is active
465:debug:main Merging existing variants '' into variants
466:debug:main new fully merged portvariants:
467:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
468:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
469:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
470:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
471:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
472:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
473:debug:main universal variant already exists, so not adding the default one
474:debug:main No need to upgrade! libedit 20121213-3.0_0 >= libedit 20121213-3.0_0
475:debug:main epoch: in tree: 0 installed: 0
476:debug:main db46 4.6.21_7 exists in the ports tree
477:debug:main db46 4.6.21_7 +java is the latest installed
478:debug:main db46 4.6.21_7 +java is active
479:debug:main Merging existing variants '+java' into variants
480:debug:main new fully merged portvariants: java +
481:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
482:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
483:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
484:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
485:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
486:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
487:debug:main universal variant already exists, so not adding the default one
488:debug:main Executing variant java provides java
489:debug:main No need to upgrade! db46 4.6.21_7 >= db46 4.6.21_7
490:debug:main epoch: in tree: 0 installed: 0
491:debug:main python_select 0.3_2 exists in the ports tree
492:debug:main python_select 0.3_2  is the latest installed
493:debug:main python_select 0.3_2  is active
494:debug:main Merging existing variants '' into variants
495:debug:main new fully merged portvariants:
496:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
497:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
498:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
499:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
500:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
501:debug:main universal_variant is false, so not adding the default universal variant
502:debug:main No need to upgrade! python_select 0.3_2 >= python_select 0.3_2
503:debug:main epoch: in tree: 0 installed: 0
504:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
505:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
506:debug:main xorg-libpthread-stubs 0.3_0  is active
507:debug:main Merging existing variants '' into variants
508:debug:main new fully merged portvariants:
509:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs
510:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
511:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
512:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
513:debug:main only one arch supported, so not adding the default universal variant
514:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
515:debug:main epoch: in tree: 0 installed: 0
516:debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
517:debug:main xorg-kbproto 1.0.6_0  is the latest installed
518:debug:main xorg-kbproto 1.0.6_0  is active
519:debug:main Merging existing variants '' into variants
520:debug:main new fully merged portvariants:
521:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto
522:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
523:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
524:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
525:debug:main only one arch supported, so not adding the default universal variant
526:debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
527:debug:main epoch: in tree: 0 installed: 0
528:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
529:debug:main xorg-renderproto 0.11.1_0  is the latest installed
530:debug:main xorg-renderproto 0.11.1_0  is active
531:debug:main Merging existing variants '' into variants
532:debug:main new fully merged portvariants:
533:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto
534:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
535:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
536:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
537:debug:main only one arch supported, so not adding the default universal variant
538:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
539:debug:main epoch: in tree: 0 installed: 0
540:debug:main xorg-libXext 1.3.1_0 exists in the ports tree
541:debug:main xorg-libXext 1.3.1_0  is the latest installed
542:debug:main xorg-libXext 1.3.1_0  is active
543:debug:main Merging existing variants '' into variants
544:debug:main new fully merged portvariants:
545:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext
546:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
547:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
548:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
549:debug:main adding the default universal variant
550:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
551:debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
552:debug:main epoch: in tree: 0 installed: 0
553:debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
554:debug:main xorg-xextproto 7.2.1_0  is the latest installed
555:debug:main xorg-xextproto 7.2.1_0  is active
556:debug:main Merging existing variants '' into variants
557:debug:main new fully merged portvariants:
558:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto
559:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
560:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
561:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
562:debug:main only one arch supported, so not adding the default universal variant
563:debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0
564:debug:main epoch: in tree: 0 installed: 0
565:debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
566:debug:main xorg-xcb-util 0.3.9_0  is the latest installed
567:debug:main xorg-xcb-util 0.3.9_0  is active
568:debug:main Merging existing variants '' into variants
569:debug:main new fully merged portvariants:
570:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-util
571:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
572:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
573:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
574:debug:main adding the default universal variant
575:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
576:debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util 0.3.9_0
577:debug:main epoch: in tree: 1 installed: 1
578:debug:main pango 1.32.5_0 exists in the ports tree
579:debug:main pango 1.32.5_0 +x11 is the latest installed
580:debug:main pango 1.32.5_0 +x11 is active
581:debug:main Merging existing variants '+x11' into variants
582:debug:main new fully merged portvariants: x11 +
583:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
584:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
585:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
586:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
587:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/active_variants-1.1.tcl
588:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
589:debug:main adding the default universal variant
590:debug:main Executing variant x11 provides x11
591:debug:main No need to upgrade! pango 1.32.5_0 >= pango 1.32.5_0
592:debug:main epoch: in tree: 0 installed: 0
593:debug:main harfbuzz 0.9.13_0 exists in the ports tree
594:debug:main harfbuzz 0.9.13_0  is the latest installed
595:debug:main harfbuzz 0.9.13_0  is active
596:debug:main Merging existing variants '' into variants
597:debug:main new fully merged portvariants:
598:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/harfbuzz
599:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
600:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
601:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
602:debug:main adding the default universal variant
603:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
604:debug:main No need to upgrade! harfbuzz 0.9.13_0 >= harfbuzz 0.9.13_0
605:debug:main epoch: in tree: 0 installed: 0
606:debug:main graphite2 1.2.1_0 exists in the ports tree
607:debug:main graphite2 1.2.1_0  is the latest installed
608:debug:main graphite2 1.2.1_0  is active
609:debug:main Merging existing variants '' into variants
610:debug:main new fully merged portvariants:
611:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/graphite2
612:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
613:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
614:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
615:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl
616:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
617:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
618:debug:main universal variant already exists, so not adding the default one
619:debug:main No need to upgrade! graphite2 1.2.1_0 >= graphite2 1.2.1_0
620:debug:main epoch: in tree: 0 installed: 0
621:debug:main icu 49.1.2_1 exists in the ports tree
622:debug:main icu 49.1.2_1  is the latest installed
623:debug:main icu 49.1.2_1  is active
624:debug:main Merging existing variants '' into variants
625:debug:main new fully merged portvariants:
626:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/icu
627:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
628:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
629:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
630:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
631:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
632:debug:main universal variant already exists, so not adding the default one
633:debug:main No need to upgrade! icu 49.1.2_1 >= icu 49.1.2_1
634:debug:main epoch: in tree: 0 installed: 0
635:debug:main Xft2 2.3.1_0 exists in the ports tree
636:debug:main Xft2 2.3.1_0  is the latest installed
637:debug:main Xft2 2.3.1_0  is active
638:debug:main Merging existing variants '' into variants
639:debug:main new fully merged portvariants:
640:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
641:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
642:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
643:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
644:debug:main adding the default universal variant
645:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
646:debug:main No need to upgrade! Xft2 2.3.1_0 >= Xft2 2.3.1_0
647:debug:main epoch: in tree: 2 installed: 2
648:debug:main gdk-pixbuf2 2.26.5_4 exists in the ports tree
649:debug:main gdk-pixbuf2 2.26.5_4 +x11 is the latest installed
650:debug:main gdk-pixbuf2 2.26.5_4 +x11 is active
651:debug:main Merging existing variants '+x11' into variants
652:debug:main new fully merged portvariants: x11 +
653:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gdk-pixbuf2
654:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
655:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
656:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
657:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
658:debug:main adding the default universal variant
659:debug:main Executing variant x11 provides x11
660:debug:main No need to upgrade! gdk-pixbuf2 2.26.5_4 >= gdk-pixbuf2 2.26.5_4
661:debug:main epoch: in tree: 0 installed: 0
662:debug:main jasper 1.900.1_10 exists in the ports tree
663:debug:main jasper 1.900.1_10  is the latest installed
664:debug:main jasper 1.900.1_10  is active
665:debug:main Merging existing variants '' into variants
666:debug:main new fully merged portvariants:
667:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
668:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
669:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
670:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
671:debug:main adding the default universal variant
672:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
673:debug:main No need to upgrade! jasper 1.900.1_10 >= jasper 1.900.1_10
674:debug:main epoch: in tree: 0 installed: 0
675:debug:main jpeg 9_1 exists in the ports tree
676:debug:main jpeg 9_1  is the latest installed
677:debug:main jpeg 9_1  is active
678:debug:main Merging existing variants '' into variants
679:debug:main new fully merged portvariants:
680:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
681:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
682:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
683:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
684:debug:main adding the default universal variant
685:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
686:debug:main No need to upgrade! jpeg 9_1 >= jpeg 9_1
687:debug:main epoch: in tree: 0 installed: 0
688:debug:main tiff 4.0.3_1 exists in the ports tree
689:debug:main tiff 4.0.3_1  is the latest installed
690:debug:main tiff 4.0.3_1  is active
691:debug:main Merging existing variants '' into variants
692:debug:main new fully merged portvariants:
693:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
694:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
695:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
696:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
697:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
698:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
699:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
700:debug:main universal variant already exists, so not adding the default one
701:debug:main No need to upgrade! tiff 4.0.3_1 >= tiff 4.0.3_1
702:debug:main epoch: in tree: 0 installed: 0
703:debug:main xorg-libXi 1.6.2_0 exists in the ports tree
704:debug:main xorg-libXi 1.6.2_0  is the latest installed
705:debug:main xorg-libXi 1.6.2_0  is active
706:debug:main Merging existing variants '' into variants
707:debug:main new fully merged portvariants:
708:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXi
709:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
710:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
711:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
712:debug:main adding the default universal variant
713:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
714:debug:main No need to upgrade! xorg-libXi 1.6.2_0 >= xorg-libXi 1.6.2_0
715:debug:main epoch: in tree: 0 installed: 0
716:debug:main xorg-inputproto 2.2.99.1_0 exists in the ports tree
717:debug:main xorg-inputproto 2.2.99.1_0  is the latest installed
718:debug:main xorg-inputproto 2.2.99.1_0  is active
719:debug:main Merging existing variants '' into variants
720:debug:main new fully merged portvariants:
721:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-inputproto
722:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
723:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
724:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
725:debug:main only one arch supported, so not adding the default universal variant
726:debug:main No need to upgrade! xorg-inputproto 2.2.99.1_0 >= xorg-inputproto 2.2.99.1_0
727:debug:main epoch: in tree: 0 installed: 0
728:debug:main xorg-libXrandr 1.4.0_0 exists in the ports tree
729:debug:main xorg-libXrandr 1.4.0_0  is the latest installed
730:debug:main xorg-libXrandr 1.4.0_0  is active
731:debug:main Merging existing variants '' into variants
732:debug:main new fully merged portvariants:
733:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXrandr
734:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
735:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
736:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
737:debug:main adding the default universal variant
738:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
739:debug:main No need to upgrade! xorg-libXrandr 1.4.0_0 >= xorg-libXrandr 1.4.0_0
740:debug:main epoch: in tree: 0 installed: 0
741:debug:main xorg-randrproto 1.4.0_0 exists in the ports tree
742:debug:main xorg-randrproto 1.4.0_0  is the latest installed
743:debug:main xorg-randrproto 1.4.0_0  is active
744:debug:main Merging existing variants '' into variants
745:debug:main new fully merged portvariants:
746:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-randrproto
747:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
748:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
749:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
750:debug:main only one arch supported, so not adding the default universal variant
751:debug:main No need to upgrade! xorg-randrproto 1.4.0_0 >= xorg-randrproto 1.4.0_0
752:debug:main epoch: in tree: 0 installed: 0
753:debug:main xorg-libXcursor 1.1.13_0 exists in the ports tree
754:debug:main xorg-libXcursor 1.1.13_0  is the latest installed
755:debug:main xorg-libXcursor 1.1.13_0  is active
756:debug:main Merging existing variants '' into variants
757:debug:main new fully merged portvariants:
758:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXcursor
759:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
760:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
761:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
762:debug:main adding the default universal variant
763:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
764:debug:main No need to upgrade! xorg-libXcursor 1.1.13_0 >= xorg-libXcursor 1.1.13_0
765:debug:main epoch: in tree: 0 installed: 0
766:debug:main xorg-libXfixes 5.0_0 exists in the ports tree
767:debug:main xorg-libXfixes 5.0_0  is the latest installed
768:debug:main xorg-libXfixes 5.0_0  is active
769:debug:main Merging existing variants '' into variants
770:debug:main new fully merged portvariants:
771:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXfixes
772:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
773:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
774:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
775:debug:main adding the default universal variant
776:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
777:debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0
778:debug:main epoch: in tree: 0 installed: 0
779:debug:main xorg-fixesproto 5.0_0 exists in the ports tree
780:debug:main xorg-fixesproto 5.0_0  is the latest installed
781:debug:main xorg-fixesproto 5.0_0  is active
782:debug:main Merging existing variants '' into variants
783:debug:main new fully merged portvariants:
784:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-fixesproto
785:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
786:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
787:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
788:debug:main only one arch supported, so not adding the default universal variant
789:debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0
790:debug:main epoch: in tree: 0 installed: 0
791:debug:main xorg-libXinerama 1.1.2_0 exists in the ports tree
792:debug:main xorg-libXinerama 1.1.2_0  is the latest installed
793:debug:main xorg-libXinerama 1.1.2_0  is active
794:debug:main Merging existing variants '' into variants
795:debug:main new fully merged portvariants:
796:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXinerama
797:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
798:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
799:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
800:debug:main adding the default universal variant
801:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
802:debug:main No need to upgrade! xorg-libXinerama 1.1.2_0 >= xorg-libXinerama 1.1.2_0
803:debug:main epoch: in tree: 0 installed: 0
804:debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
805:debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
806:debug:main xorg-xineramaproto 1.2.1_0  is active
807:debug:main Merging existing variants '' into variants
808:debug:main new fully merged portvariants:
809:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xineramaproto
810:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
811:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
812:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
813:debug:main only one arch supported, so not adding the default universal variant
814:debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0
815:debug:main epoch: in tree: 0 installed: 0
816:debug:main xorg-libXdamage 1.1.4_0 exists in the ports tree
817:debug:main xorg-libXdamage 1.1.4_0  is the latest installed
818:debug:main xorg-libXdamage 1.1.4_0  is active
819:debug:main Merging existing variants '' into variants
820:debug:main new fully merged portvariants:
821:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdamage
822:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
823:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
824:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
825:debug:main adding the default universal variant
826:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
827:debug:main No need to upgrade! xorg-libXdamage 1.1.4_0 >= xorg-libXdamage 1.1.4_0
828:debug:main epoch: in tree: 0 installed: 0
829:debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
830:debug:main xorg-damageproto 1.2.1_0  is the latest installed
831:debug:main xorg-damageproto 1.2.1_0  is active
832:debug:main Merging existing variants '' into variants
833:debug:main new fully merged portvariants:
834:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-damageproto
835:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
836:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
837:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
838:debug:main only one arch supported, so not adding the default universal variant
839:debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0
840:debug:main epoch: in tree: 0 installed: 0
841:debug:main xorg-libXcomposite 0.4.4_0 exists in the ports tree
842:debug:main xorg-libXcomposite 0.4.4_0  is the latest installed
843:debug:main xorg-libXcomposite 0.4.4_0  is active
844:debug:main Merging existing variants '' into variants
845:debug:main new fully merged portvariants:
846:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXcomposite
847:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
848:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
849:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
850:debug:main adding the default universal variant
851:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
852:debug:main No need to upgrade! xorg-libXcomposite 0.4.4_0 >= xorg-libXcomposite 0.4.4_0
853:debug:main epoch: in tree: 0 installed: 0
854:debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
855:debug:main xorg-compositeproto 0.4.2_0  is the latest installed
856:debug:main xorg-compositeproto 0.4.2_0  is active
857:debug:main Merging existing variants '' into variants
858:debug:main new fully merged portvariants:
859:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-compositeproto
860:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
861:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
862:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
863:debug:main only one arch supported, so not adding the default universal variant
864:debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0
865:debug:main epoch: in tree: 0 installed: 0
866:debug:main shared-mime-info 1.0_0 exists in the ports tree
867:debug:main shared-mime-info 1.0_0  is the latest installed
868:debug:main shared-mime-info 1.0_0  is active
869:debug:main Merging existing variants '' into variants
870:debug:main new fully merged portvariants:
871:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/shared-mime-info
872:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
873:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
874:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
875:debug:main adding the default universal variant
876:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
877:debug:main No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info 1.0_0
878:debug:main epoch: in tree: 0 installed: 0
879:debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
880:debug:main hicolor-icon-theme 0.12_0  is the latest installed
881:debug:main hicolor-icon-theme 0.12_0  is active
882:debug:main Merging existing variants '' into variants
883:debug:main new fully merged portvariants:
884:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/hicolor-icon-theme
885:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
886:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
887:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
888:debug:main only one arch supported, so not adding the default universal variant
889:debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0
890:msg:main --->  Computing dependencies for dvdisaster:info:main .:debug:main dvdisaster has no conflicts
891:debug:main Searching for dependency: pkgconfig
892:debug:main Found Dependency: receipt exists for pkgconfig
893:debug:main Searching for dependency: gtk2
894:debug:main Found Dependency: receipt exists for gtk2
895:msg:main
896:debug:main Executing org.macports.main (dvdisaster)
897:debug:main changing euid/egid - current euid: 0 - current egid: 0
898:debug:main egid changed to: 500
899:debug:main euid changed to: 503
900:debug:archivefetch archivefetch phase started at Mon Mar 18 13:59:11 GMT 2013
901:msg:archivefetch --->  Fetching archive for dvdisaster
902:debug:archivefetch Executing org.macports.archivefetch (dvdisaster)
903:debug:archivefetch euid/egid changed to: 0/0
904:debug:archivefetch chowned /opt/local/var/macports/incoming to macports
905:debug:archivefetch euid/egid changed to: 503/500
906:info:archivefetch --->  dvdisaster-0.72.3_0.darwin_9.ppc.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
907:msg:archivefetch --->  Attempting to fetch dvdisaster-0.72.3_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/dvdisaster
908:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
909:msg:archivefetch --->  Attempting to fetch dvdisaster-0.72.3_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/dvdisaster
910:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
911:msg:archivefetch --->  Attempting to fetch dvdisaster-0.72.3_0.darwin_9.ppc.tbz2 from http://packages.macports.org/dvdisaster
912:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
913:debug:archivefetch Privilege de-escalation not attempted as not running as root.
914:debug:fetch fetch phase started at Mon Mar 18 13:59:12 GMT 2013
915:notice:fetch --->  Fetching distfiles for dvdisaster
916:debug:fetch Executing org.macports.fetch (dvdisaster)
917:debug:fetch Privilege de-escalation not attempted as not running as root.
918:debug:checksum checksum phase started at Mon Mar 18 13:59:12 GMT 2013
919:notice:checksum --->  Verifying checksum(s) for dvdisaster
920:debug:checksum Executing org.macports.checksum (dvdisaster)
921:info:checksum --->  Checksumming dvdisaster-0.72.3.tar.bz2
922:debug:checksum Correct (sha1) checksum for dvdisaster-0.72.3.tar.bz2
923:debug:checksum Correct (rmd160) checksum for dvdisaster-0.72.3.tar.bz2
924:debug:checksum Privilege de-escalation not attempted as not running as root.
925:debug:extract extract phase started at Mon Mar 18 13:59:12 GMT 2013
926:notice:extract --->  Extracting dvdisaster
927:debug:extract setting option extract.cmd to /usr/bin/bzip2
928:debug:extract Executing org.macports.extract (dvdisaster)
929:info:extract --->  Extracting dvdisaster-0.72.3.tar.bz2
930:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/dvdisaster/dvdisaster-0.72.3.tar.bz2'
931:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
932:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/dvdisaster/dvdisaster-0.72.3.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -'
933:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/dvdisaster/dvdisaster-0.72.3.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -
934:debug:extract euid/egid changed to: 0/0
935:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work to macports
936:debug:extract euid/egid changed to: 503/500
937:debug:extract Privilege de-escalation not attempted as not running as root.
938:debug:patch patch phase started at Mon Mar 18 13:59:54 GMT 2013
939:debug:patch Executing org.macports.patch (dvdisaster)
940:debug:patch Executing proc-post-org.macports.patch-patch-0
941:debug:patch Executing reinplace: /usr/bin/sed /^REQUIRE_GCC/d < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3/configure >@ file10
942:debug:patch euid/egid changed to: 0/0
943:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3/configure to macports
944:debug:patch euid/egid changed to: 503/500
945:debug:patch euid/egid changed to: 0/0
946:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3/configure
947:debug:patch euid/egid changed to: 503/500
948:debug:patch Executing reinplace: /usr/bin/sed /^REQUIRE_GCC/d < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3/tools/configure >@ file10
949:debug:patch euid/egid changed to: 0/0
950:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3/tools/configure to macports
951:debug:patch euid/egid changed to: 503/500
952:debug:patch euid/egid changed to: 0/0
953:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3/tools/configure
954:debug:patch euid/egid changed to: 503/500
955:debug:patch Privilege de-escalation not attempted as not running as root.
956:debug:configure configure phase started at Mon Mar 18 13:59:54 GMT 2013
957:notice:configure --->  Configuring dvdisaster
958:debug:configure Using compiler 'Mac OS X gcc 4.0'
959:debug:configure Executing org.macports.configure (dvdisaster)
960:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch ppc' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch ppc' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m32' LDFLAGS='-L/opt/local/lib -arch ppc' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-pipe -O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch ppc' FFLAGS='-pipe -O2 -m32' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.0'
961:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3" && ./configure --prefix=/opt/local --buildroot=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/destroot --mandir=/opt/local/share/man --docdir=/opt/local/share/doc --localedir=/opt/local/share/locale --png-includes=/opt/local/include'
962:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3" && ./configure --prefix=/opt/local --buildroot=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/destroot --mandir=/opt/local/share/man --docdir=/opt/local/share/doc --localedir=/opt/local/share/locale --png-includes=/opt/local/include
963:info:configure Bash based configure V0.55
964:info:configure
965:info:configure Build environment: Darwin, using settings: darwin
966:info:configure
967:info:configure Configuring package dvdisaster, version 0.72.
968:info:configure
969:info:configure Checking for gmake: yes
970:info:configure Source directory:  /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3
971:info:configure Package name:  dvdisaster-0.72.3
972:info:configure Installation prefix:  /opt/local
973:info:configure Binary directory:  /opt/local/bin
974:info:configure Man page directory:  /opt/local/share/man
975:info:configure Documentation directory:  /opt/local/share/doc
976:info:configure Documentation sub directory:  dvdisaster-0.72.3
977:info:configure Locale directory:  /opt/local/share/locale
978:info:configure PHP bind mount directory:  /var/www/dvdisaster
979:info:configure Build root:  /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/destroot
980:info:configure
981:info:configure Looking for includes and libraries:
982:info:configure Gtk+ 2.6.0 is required...
983:info:configure  pkg-config... works
984:info:configure  test compile... works
985:info:configure  Checking for GTK+ version >= 2.6.0. Found version 2.24.16. Okay.
986:info:configure
987:info:configure Checking for locale.h: yes
988:info:configure Checking for libintl.h: yes
989:info:configure Checking for cpuid.h: no
990:info:configure Checking for libintl: yes
991:info:configure Checking for libcam: no
992:info:configure
993:info:configure Checking for functions and symbols...
994:info:configure  getopt_long: yes
995:info:configure  gettext: yes
996:info:configure  round: yes
997:info:configure  O_LARGEFILE in fcntl.h: no
998:info:configure
999:info:configure Checking byte order... big endian
1000:info:configure Checking for SSE2... no
1001:info:configure
1002:info:configure Checking for additional tools...
1003:info:configure  xgettext: present
1004:info:configure  msgmerge: present
1005:info:configure  msgfmt: present
1006:info:configure  gdk_pixbuf_csource: present
1007:info:configure
1008:info:configure Additional configuration options:
1009:info:configure  with nls: yes
1010:info:configure  with memdebug: no
1011:info:configure  with efence: no
1012:info:configure  with embedded-src-path: yes
1013:info:configure
1014:info:configure Collecting source files:
1015:info:configure  bitmap build closure crc32 crcbuf curve debug ds-marker dvdisaster ecc-rs01 ecc-rs02 endian file galois help-dialogs heuristic-lec icon-factory l-ec large-io logfile main-window maintenance md5 medium-info memtrack menubar method misc preferences print-sense random raw-editor raw-sector-cache read-adaptive-window read-adaptive read-linear-window read-linear recover-raw rs-encoder-sse2 rs-encoder rs01-common rs01-create rs01-fix rs01-verify rs01-window rs02-common rs02-create rs02-fix rs02-verify rs02-window scsi-darwin scsi-freebsd scsi-layer scsi-linux scsi-netbsd scsi-solaris scsi-unknown scsi-win32 show-manual smart-lec spiral udf welcome-window
1016:info:configure
1017:info:configure Collecting methods:
1018:info:configure  rs01 rs02
1019:info:configure
1020:info:configure Configuring the tools ... OK
1021:info:configure
1022:info:configure Configuration is complete.
1023:info:configure Type 'make show' to verify the settings,
1024:info:configure or enter 'make' to start the build immediately.
1025:info:configure
1026:info:configure * Note that your $CFLAGS=-pipe -O2 -arch ppc
1027:info:configure * have been included into the configuration.
1028:info:configure * It is recommended not to specify additional $CFLAGS,
1029:info:configure * but feel free to continue at your own risk.
1030:info:configure
1031:info:configure * Note that your $LDFLAGS=-L/opt/local/lib -arch ppc
1032:info:configure * have been included into the configuration.
1033:info:configure * It is recommended not to specify additional $LDFLAGS,
1034:info:configure * but feel free to continue at your own risk.
1035:info:configure
1036:info:configure * Note that installation will be done relative to
1037:info:configure * $BUILDROOT=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/destroot.
1038:info:configure * This is okay if you want to create packages like rpm or
1039:info:configure * debian archives.
1040:info:configure * Normal installs will be broken by setting --buildroot.
1041:info:configure
1042:debug:configure Privilege de-escalation not attempted as not running as root.
1043:debug:build build phase started at Mon Mar 18 14:00:48 GMT 2013
1044:notice:build --->  Building dvdisaster
1045:debug:build Executing org.macports.build (dvdisaster)
1046:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
1047:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3" && /usr/bin/make -w all CC=/usr/bin/gcc-4.0'
1048:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3" && /usr/bin/make -w all CC=/usr/bin/gcc-4.0
1049:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3'
1050:info:build Compiling: method-link.c
1051:info:build Compiling: bitmap.c
1052:info:build In file included from dvdisaster.h:44,
1053:info:build                  from bitmap.c:22:
1054:info:build /opt/local/include/glib-2.0/glib/gstrfuncs.h:28:2: error: #error "Only <glib.h> can be included directly."
1055:info:build make: *** [bitmap.o] Error 1
1056:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3'
1057:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/work/dvdisaster-0.72.3" && /usr/bin/make -w all CC=/usr/bin/gcc-4.0
1058:info:build Exit code: 2
1059:error:build org.macports.build for port dvdisaster returned: command execution failed
1060:debug:build Error code: CHILDSTATUS 2505 2
1061:debug:build Backtrace: command execution failed
1062    while executing
1063"system -nice 0 $fullcmdstring"
1064    ("eval" body line 1)
1065    invoked from within
1066"eval system $notty $nice \$fullcmdstring"
1067    invoked from within
1068"command_exec build"
1069    (procedure "portbuild::build_main" line 8)
1070    invoked from within
1071"$procedure $targetname"
1072:info:build Warning: targets not executed for dvdisaster: org.macports.activate org.macports.build org.macports.destroot org.macports.install
1073:notice:build Please see the log file for port dvdisaster for details:
1074    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_dvdisaster/dvdisaster/main.log