Ticket #39774: TXT.txt

{\rtf1\ansi\ansicpg1252\cocoartf1138\cocoasubrtf510
{\fonttbl\f0\fmodern\fcharset0 Courier;}
{\colortbl;\red255\green255\blue255;}
\paperw11900\paperh16840\margl1440\margr1440\vieww10800\viewh8400\viewkind0
\deftab720
\pard\pardeftab720

\f0\fs24 \cf0 version:1\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main cmake 2.8.10.2_0 exists in the ports tree\
:debug:main cmake 2.8.10.2_0  is the latest installed\
:debug:main cmake 2.8.10.2_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cmake\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! cmake 2.8.10.2_0 >= cmake 2.8.10.2_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main libidn 1.26_0 exists in the ports tree\
:debug:main libidn 1.26_0  is the latest installed\
:debug:main libidn 1.26_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! libidn 1.26_0 >= libidn 1.26_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main libiconv 1.14_0 exists in the ports tree\
:debug:main libiconv 1.14_0  is the latest installed\
:debug:main libiconv 1.14_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main gettext 0.18.3_0 exists in the ports tree\
:debug:main gettext 0.18.3_0  is the latest installed\
:debug:main gettext 0.18.3_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main compiler clang 425.0.28 not blacklisted because does not match \{clang < 211.10.1\}\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! gettext 0.18.3_0 >= gettext 0.18.3_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main expat 2.1.0_0 exists in the ports tree\
:debug:main expat 2.1.0_0  is the latest installed\
:debug:main expat 2.1.0_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main ncurses 5.9_2 exists in the ports tree\
:debug:main ncurses 5.9_2  is the latest installed\
:debug:main ncurses 5.9_2  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2\
:debug:main epoch: in tree: 1 installed: 1\
:debug:main openssl 1.0.1e_1 exists in the ports tree\
:debug:main openssl 1.0.1e_1  is the latest installed\
:debug:main openssl 1.0.1e_1  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! openssl 1.0.1e_1 >= openssl 1.0.1e_1\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main zlib 1.2.8_0 exists in the ports tree\
:debug:main zlib 1.2.8_0  is the latest installed\
:debug:main zlib 1.2.8_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! zlib 1.2.8_0 >= zlib 1.2.8_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main eigen 2.0.17_0 exists in the ports tree\
:debug:main eigen 2.0.17_0  is the latest installed\
:debug:main eigen 2.0.17_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/eigen\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! eigen 2.0.17_0 >= eigen 2.0.17_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main cairo 1.12.14_0 exists in the ports tree\
:debug:main cairo 1.12.14_0 +x11 is the latest installed\
:debug:main cairo 1.12.14_0 +x11 is active\
:debug:main Merging existing variants '+x11' into variants\
:debug:main new fully merged portvariants: x11 +\
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl\
:debug:main compiler clang 425.0.28 not blacklisted because does not match \{clang < 318.0.61\}\
:debug:main universal variant already exists, so not adding the default one\
:debug:main Executing variant x11 provides x11\
:debug:main No need to upgrade! cairo 1.12.14_0 >= cairo 1.12.14_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main libpixman 0.30.0_0 exists in the ports tree\
:debug:main libpixman 0.30.0_0  is the latest installed\
:debug:main libpixman 0.30.0_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main compiler clang 425.0.28 not blacklisted because does not match \{clang < 211.10.1\}\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! libpixman 0.30.0_0 >= libpixman 0.30.0_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main glib2 2.36.3_2 exists in the ports tree\
:debug:main glib2 2.36.3_2  is the latest installed\
:debug:main glib2 2.36.3_2  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/conflicts_build-1.0.tcl\
:debug:main compiler clang 425.0.28 not blacklisted because does not match \{clang < 318\}\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! glib2 2.36.3_2 >= glib2 2.36.3_2\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main libffi 3.0.13_0 exists in the ports tree\
:debug:main libffi 3.0.13_0  is the latest installed\
:debug:main libffi 3.0.13_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! libffi 3.0.13_0 >= libffi 3.0.13_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main perl5 5.12.4_0 exists in the ports tree\
:debug:main perl5 5.12.4_0 +perl5_12 is the latest installed\
:debug:main perl5 5.12.4_0 +perl5_12 is active\
:debug:main Merging existing variants '+perl5_12' into variants\
:debug:main new fully merged portvariants: perl5_12 +\
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main universal_variant is false, so not adding the default universal variant\
:debug:main Executing variant perl5_12 provides perl5_12\
:debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main perl5.12 5.12.4_2 exists in the ports tree\
:debug:main perl5.12 5.12.4_2  is the latest installed\
:debug:main perl5.12 5.12.4_2  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! perl5.12 5.12.4_2 >= perl5.12 5.12.4_2\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main gdbm 1.10_2 exists in the ports tree\
:debug:main gdbm 1.10_2  is the latest installed\
:debug:main gdbm 1.10_2  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main fontconfig 2.10.93_0 exists in the ports tree\
:debug:main fontconfig 2.10.93_0  is the latest installed\
:debug:main fontconfig 2.10.93_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! fontconfig 2.10.93_0 >= fontconfig 2.10.93_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main freetype 2.5.0_1 exists in the ports tree\
:debug:main freetype 2.5.0_1  is the latest installed\
:debug:main freetype 2.5.0_1  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! freetype 2.5.0_1 >= freetype 2.5.0_1\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main bzip2 1.0.6_0 exists in the ports tree\
:debug:main bzip2 1.0.6_0  is the latest installed\
:debug:main bzip2 1.0.6_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main libpng 1.5.16_0 exists in the ports tree\
:debug:main libpng 1.5.16_0  is the latest installed\
:debug:main libpng 1.5.16_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! libpng 1.5.16_0 >= libpng 1.5.16_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main lzo2 2.06_0 exists in the ports tree\
:debug:main lzo2 2.06_0  is the latest installed\
:debug:main lzo2 2.06_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! lzo2 2.06_0 >= lzo2 2.06_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xrender 0.9.8_0 exists in the ports tree\
:debug:main xrender 0.9.8_0  is the latest installed\
:debug:main xrender 0.9.8_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xrender 0.9.8_0 >= xrender 0.9.8_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-libX11 1.6.0_0 exists in the ports tree\
:debug:main xorg-libX11 1.6.0_0  is the latest installed\
:debug:main xorg-libX11 1.6.0_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xorg-libX11 1.6.0_0 >= xorg-libX11 1.6.0_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree\
:debug:main xorg-libXdmcp 1.1.1_0  is the latest installed\
:debug:main xorg-libXdmcp 1.1.1_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-libXau 1.0.8_0 exists in the ports tree\
:debug:main xorg-libXau 1.0.8_0  is the latest installed\
:debug:main xorg-libXau 1.0.8_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xorg-libXau 1.0.8_0 >= xorg-libXau 1.0.8_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-xproto 7.0.24_0 exists in the ports tree\
:debug:main xorg-xproto 7.0.24_0  is the latest installed\
:debug:main xorg-xproto 7.0.24_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main only one arch supported, so not adding the default universal variant\
:debug:main No need to upgrade! xorg-xproto 7.0.24_0 >= xorg-xproto 7.0.24_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-libxcb 1.9.1_0 exists in the ports tree\
:debug:main xorg-libxcb 1.9.1_0 +python27 is the latest installed\
:debug:main xorg-libxcb 1.9.1_0 +python27 is active\
:debug:main Merging existing variants '+python27' into variants\
:debug:main new fully merged portvariants: python27 +\
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main Executing variant python27 provides python27\
:debug:main No need to upgrade! xorg-libxcb 1.9.1_0 >= xorg-libxcb 1.9.1_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-xcb-proto 1.8_0 exists in the ports tree\
:debug:main xorg-xcb-proto 1.8_0 +python27 is the latest installed\
:debug:main xorg-xcb-proto 1.8_0 +python27 is active\
:debug:main Merging existing variants '+python27' into variants\
:debug:main new fully merged portvariants: python27 +\
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main only one arch supported, so not adding the default universal variant\
:debug:main Executing variant python27 provides python27\
:debug:main No need to upgrade! xorg-xcb-proto 1.8_0 >= xorg-xcb-proto 1.8_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main libxml2 2.9.1_0 exists in the ports tree\
:debug:main libxml2 2.9.1_0  is the latest installed\
:debug:main libxml2 2.9.1_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! libxml2 2.9.1_0 >= libxml2 2.9.1_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xz 5.0.4_0 exists in the ports tree\
:debug:main xz 5.0.4_0  is the latest installed\
:debug:main xz 5.0.4_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0\
:debug:main epoch: in tree: 2 installed: 2\
:debug:main python27 2.7.5_0 exists in the ports tree\
:debug:main python27 2.7.5_0  is the latest installed\
:debug:main python27 2.7.5_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! python27 2.7.5_0 >= python27 2.7.5_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main sqlite3 3.7.17_0 exists in the ports tree\
:debug:main sqlite3 3.7.17_0  is the latest installed\
:debug:main sqlite3 3.7.17_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! sqlite3 3.7.17_0 >= sqlite3 3.7.17_0\
:debug:main epoch: in tree: 20090923 installed: 20090923\
:debug:main libedit 20121213-3.0_0 exists in the ports tree\
:debug:main libedit 20121213-3.0_0  is the latest installed\
:debug:main libedit 20121213-3.0_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! libedit 20121213-3.0_0 >= libedit 20121213-3.0_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main db46 4.6.21_8 exists in the ports tree\
:debug:main db46 4.6.21_8  is the latest installed\
:debug:main db46 4.6.21_8  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl\
:debug:main universal variant already exists, so not adding the default one\
:debug:main No need to upgrade! db46 4.6.21_8 >= db46 4.6.21_8\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main db_select 0.1_2 exists in the ports tree\
:debug:main db_select 0.1_2  is the latest installed\
:debug:main db_select 0.1_2  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/db_select\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl\
:debug:main universal_variant is false, so not adding the default universal variant\
:debug:main No need to upgrade! db_select 0.1_2 >= db_select 0.1_2\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main python_select 0.3_2 exists in the ports tree\
:debug:main python_select 0.3_2  is the latest installed\
:debug:main python_select 0.3_2  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl\
:debug:main universal_variant is false, so not adding the default universal variant\
:debug:main No need to upgrade! python_select 0.3_2 >= python_select 0.3_2\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree\
:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed\
:debug:main xorg-libpthread-stubs 0.3_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main only one arch supported, so not adding the default universal variant\
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-kbproto 1.0.6_0 exists in the ports tree\
:debug:main xorg-kbproto 1.0.6_0  is the latest installed\
:debug:main xorg-kbproto 1.0.6_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main only one arch supported, so not adding the default universal variant\
:debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree\
:debug:main xorg-renderproto 0.11.1_0  is the latest installed\
:debug:main xorg-renderproto 0.11.1_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main only one arch supported, so not adding the default universal variant\
:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-libXext 1.3.2_0 exists in the ports tree\
:debug:main xorg-libXext 1.3.2_0  is the latest installed\
:debug:main xorg-libXext 1.3.2_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xorg-libXext 1.3.2_0 >= xorg-libXext 1.3.2_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-xextproto 7.2.1_0 exists in the ports tree\
:debug:main xorg-xextproto 7.2.1_0  is the latest installed\
:debug:main xorg-xextproto 7.2.1_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main only one arch supported, so not adding the default universal variant\
:debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0\
:debug:main epoch: in tree: 0 installed: 0\
:debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree\
:debug:main xorg-xcb-util 0.3.9_0  is the latest installed\
:debug:main xorg-xcb-util 0.3.9_0  is active\
:debug:main Merging existing variants '' into variants\
:debug:main new fully merged portvariants: \
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-util\
:debug:main OS darwin/11.4.2 (Mac OS X 10.7) arch i386\
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided\
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided\
:debug:main adding the default universal variant\
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf\
:debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util 0.3.9_0\
:msg:main --->  Computing dependencies for openbabel:info:main .:debug:main openbabel has no conflicts\
:debug:main Searching for dependency: cmake\
:debug:main Found Dependency: receipt exists for cmake\
:debug:main Searching for dependency: eigen\
:debug:main Found Dependency: receipt exists for eigen\
:debug:main Searching for dependency: cairo\
:debug:main Found Dependency: receipt exists for cairo\
:debug:main Searching for dependency: libiconv\
:debug:main Found Dependency: receipt exists for libiconv\
:debug:main Searching for dependency: libxml2\
:debug:main Found Dependency: receipt exists for libxml2\
:debug:main Searching for dependency: zlib\
:debug:main Found Dependency: receipt exists for zlib\
:msg:main \
:debug:main Executing org.macports.main (openbabel)\
:debug:main changing euid/egid - current euid: 0 - current egid: 0\
:debug:main egid changed to: 501\
:debug:main euid changed to: 502\
:debug:archivefetch archivefetch phase started at Wed Jul 17 15:17:53 BST 2013\
:msg:archivefetch --->  Fetching archive for openbabel\
:debug:archivefetch Executing org.macports.archivefetch (openbabel)\
:debug:archivefetch euid/egid changed to: 0/0\
:debug:archivefetch chowned /opt/local/var/macports/incoming to macports\
:debug:archivefetch euid/egid changed to: 502/501\
:info:archivefetch --->  openbabel-2.3.1_0.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified\
:msg:archivefetch --->  Attempting to fetch openbabel-2.3.1_0.darwin_11.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/openbabel\
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404\
:msg:archivefetch --->  Attempting to fetch openbabel-2.3.1_0.darwin_11.x86_64.tbz2 from http://lil.fr.packages.macports.org/openbabel\
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404\
:msg:archivefetch --->  Attempting to fetch openbabel-2.3.1_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/openbabel\
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404\
:debug:archivefetch Privilege de-escalation not attempted as not running as root.\
:debug:fetch fetch phase started at Wed Jul 17 15:17:55 BST 2013\
:notice:fetch --->  Fetching distfiles for openbabel\
:debug:fetch Executing org.macports.fetch (openbabel)\
:debug:fetch Privilege de-escalation not attempted as not running as root.\
:debug:checksum checksum phase started at Wed Jul 17 15:17:55 BST 2013\
:notice:checksum --->  Verifying checksum(s) for openbabel\
:debug:checksum Executing org.macports.checksum (openbabel)\
:info:checksum --->  Checksumming openbabel-2.3.1.tar.gz\
:debug:checksum Correct (rmd160) checksum for openbabel-2.3.1.tar.gz\
:debug:checksum Correct (sha256) checksum for openbabel-2.3.1.tar.gz\
:debug:checksum Privilege de-escalation not attempted as not running as root.\
:debug:extract extract phase started at Wed Jul 17 15:17:56 BST 2013\
:notice:extract --->  Extracting openbabel\
:debug:extract Executing org.macports.extract (openbabel)\
:info:extract --->  Extracting openbabel-2.3.1.tar.gz\
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/openbabel/openbabel-2.3.1.tar.gz'\
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'\
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/openbabel/openbabel-2.3.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'\
:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/openbabel/openbabel-2.3.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - \
:debug:extract euid/egid changed to: 0/0\
:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work to macports\
:debug:extract euid/egid changed to: 502/501\
:debug:extract Privilege de-escalation not attempted as not running as root.\
:debug:patch patch phase started at Wed Jul 17 15:17:58 BST 2013\
:debug:patch Executing org.macports.patch (openbabel)\
:debug:patch Privilege de-escalation not attempted as not running as root.\
:debug:configure configure phase started at Wed Jul 17 15:17:58 BST 2013\
:notice:configure --->  Configuring openbabel\
:debug:configure Using compiler 'Mac OS X clang'\
:debug:configure Executing proc-pre-org.macports.configure-configure-0\
:debug:configure Executing org.macports.configure (openbabel)\
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang'\
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work/openbabel-2.3.1" && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -DCMAKE_FIND_FRAMEWORK=LAST -Wno-dev -DBUILD_GUI=OFF -DBUILD_TESTING=OFF -DPYTHON_BINDINGS=OFF -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_SYSROOT=/ -DCMAKE_OSX_DEPLOYMENT_TARGET=""'\
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work/openbabel-2.3.1" && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -DCMAKE_FIND_FRAMEWORK=LAST -Wno-dev -DBUILD_GUI=OFF -DBUILD_TESTING=OFF -DPYTHON_BINDINGS=OFF -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_SYSROOT=/ -DCMAKE_OSX_DEPLOYMENT_TARGET="" \
:info:configure -- The C compiler identification is Clang 4.2.0\
:info:configure -- The CXX compiler identification is Clang 4.2.0\
:info:configure -- Check for working C compiler: /usr/bin/clang\
:info:configure -- Check for working C compiler: /usr/bin/clang -- works\
:info:configure -- Detecting C compiler ABI info\
:info:configure -- Detecting C compiler ABI info - done\
:info:configure -- Check for working CXX compiler: /usr/bin/clang++\
:info:configure -- Check for working CXX compiler: /usr/bin/clang++ -- works\
:info:configure -- Detecting CXX compiler ABI info\
:info:configure -- Detecting CXX compiler ABI info - done\
:info:configure -- Using included inchi library.\
:info:configure -- Found LibXml2: /opt/local/lib/libxml2.dylib (found version "2.9.1") \
:info:configure -- Found ZLIB: /opt/local/lib/libz.dylib (found version "1.2.8") \
:info:configure -- Could NOT find wxWidgets (missing:  wxWidgets_FOUND) \
:info:configure -- Looking for conio.h\
:info:configure -- Looking for conio.h - not found\
:info:configure -- Looking for sys/time.h\
:info:configure -- Looking for sys/time.h - found\
:info:configure -- Looking for time.h\
:info:configure -- Looking for time.h - found\
:info:configure -- Looking for strings.h\
:info:configure -- Looking for strings.h - found\
:info:configure -- Looking for rpc/xdr.h\
:info:configure -- Looking for rpc/xdr.h - not found\
:info:configure -- Looking for regex.h\
:info:configure -- Looking for regex.h - found\
:info:configure -- Looking for C++ include sstream\
:info:configure -- Looking for C++ include sstream - found\
:info:configure -- Looking for rint\
:info:configure -- Looking for rint - found\
:info:configure -- Looking for snprintf\
:info:configure -- Looking for snprintf - found\
:info:configure -- Looking for sranddev\
:info:configure -- Looking for sranddev - found\
:info:configure -- Looking for strcasecmp\
:info:configure -- Looking for strcasecmp - found\
:info:configure -- Looking for strncasecmp\
:info:configure -- Looking for strncasecmp - found\
:info:configure -- Looking for dlopen in dl\
:info:configure -- Looking for dlopen in dl - found\
:info:configure -- Looking for sys/types.h\
:info:configure -- Looking for sys/types.h - found\
:info:configure -- Looking for stdint.h\
:info:configure -- Looking for stdint.h - found\
:info:configure -- Looking for stddef.h\
:info:configure -- Looking for stddef.h - found\
:info:configure -- Check size of clock_t\
:info:configure -- Check size of clock_t - done\
:info:configure -- Performing Test SCANDIR_NEEDS_CONST\
:info:configure -- Performing Test SCANDIR_NEEDS_CONST - Failed\
:info:configure -- Found Eigen2: /opt/local/include/eigen2 (Required is at least version "2.0.0") \
:info:configure CMake Error at /opt/local/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:97 (message):\
:info:configure   Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE)\
:info:configure Call Stack (most recent call first):\
:info:configure   /opt/local/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:291 (_FPHSA_FAILURE_MESSAGE)\
:info:configure   /opt/local/share/cmake-2.8/Modules/FindPkgConfig.cmake:102 (find_package_handle_standard_args)\
:info:configure   cmake/modules/FindCairo.cmake:23 (find_package)\
:info:configure   CMakeLists.txt:404 (find_package)\
:info:configure \
:info:configure \
:info:configure -- Configuring incomplete, errors occurred!\
:info:configure Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/work/openbabel-2.3.1" && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -DCMAKE_FIND_FRAMEWORK=LAST -Wno-dev -DBUILD_GUI=OFF -DBUILD_TESTING=OFF -DPYTHON_BINDINGS=OFF -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_SYSROOT=/ -DCMAKE_OSX_DEPLOYMENT_TARGET="" \
:info:configure Exit code: 1\
:error:configure org.macports.configure for port openbabel returned: configure failure: command execution failed\
:debug:configure Error code: NONE\
:debug:configure Backtrace: configure failure: command execution failed\
    while executing\
"$procedure $targetname"\
:info:configure Warning: targets not executed for openbabel: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install\
:notice:configure Please see the log file for port openbabel for details:\
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_openbabel/openbabel/main.log\
}