Ticket #40181: gsl+gcc47+optimized.main.log

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main texinfo 4.13_2 exists in the ports tree
:debug:main texinfo 4.13_2  is the latest installed
:debug:main texinfo 4.13_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/texinfo
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.3_0 exists in the ports tree
:debug:main gettext 0.18.3_0  is the latest installed
:debug:main gettext 0.18.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main compiler clang 425.0.28 not blacklisted because does not match {clang < 211.10.1}
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! gettext 0.18.3_0 >= gettext 0.18.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0  is the latest installed
:debug:main expat 2.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0  is the latest installed
:debug:main libiconv 1.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_2 exists in the ports tree
:debug:main ncurses 5.9_2  is the latest installed
:debug:main ncurses 5.9_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2
:debug:main epoch: in tree: 1 installed: 1
:debug:main gcc47 4.7.3_2 exists in the ports tree
:debug:main gcc47 4.7.3_2  is the latest installed
:debug:main gcc47 4.7.3_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/gcc47
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main compiler llvm-gcc-4.2 2336.11.00 not blacklisted because does not match {llvm-gcc-4.2 < 2336.1}
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! gcc47 4.7.3_2 >= gcc47 4.7.3_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gmp 5.0.5_0 exists in the ports tree
:debug:main gmp 5.0.5_0  is the latest installed
:debug:main gmp 5.0.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! gmp 5.0.5_0 >= gmp 5.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mpfr 3.1.1-p2_0 exists in the ports tree
:debug:main mpfr 3.1.1-p2_0  is the latest installed
:debug:main mpfr 3.1.1-p2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/mpfr
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! mpfr 3.1.1-p2_0 >= mpfr 3.1.1-p2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libmpc 1.0.1_0 exists in the ports tree
:debug:main libmpc 1.0.1_0  is the latest installed
:debug:main libmpc 1.0.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libmpc
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! libmpc 1.0.1_0 >= libmpc 1.0.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ppl 1.0_1 exists in the ports tree
:debug:main ppl 1.0_1  is the latest installed
:debug:main ppl 1.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ppl
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! ppl 1.0_1 >= ppl 1.0_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main glpk 4.48_0 exists in the ports tree
:debug:main glpk 4.48_0  is the latest installed
:debug:main glpk 4.48_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/glpk
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! glpk 4.48_0 >= glpk 4.48_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.8_0 exists in the ports tree
:debug:main zlib 1.2.8_0  is the latest installed
:debug:main zlib 1.2.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! zlib 1.2.8_0 >= zlib 1.2.8_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main cloog 0.18.0_0 exists in the ports tree
:debug:main cloog 0.18.0_0  is the latest installed
:debug:main cloog 0.18.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cloog
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! cloog 0.18.0_0 >= cloog 0.18.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main isl 0.12_0 exists in the ports tree
:debug:main isl 0.12_0  is the latest installed
:debug:main isl 0.12_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/isl
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! isl 0.12_0 >= isl 0.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gcc_select 0.1_8 exists in the ports tree
:debug:main gcc_select 0.1_8  is the latest installed
:debug:main gcc_select 0.1_8  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/gcc_select
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! gcc_select 0.1_8 >= gcc_select 0.1_8
:debug:main epoch: in tree: 0 installed: 0
:debug:main ld64 136_2 exists in the ports tree
:debug:main ld64 136_2 +llvm32 is the latest installed
:debug:main ld64 136_2 +llvm32 is active
:debug:main Merging existing variants '+llvm32' into variants
:debug:main new fully merged portvariants: llvm32 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ld64
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant llvm32 provides llvm32
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! ld64 136_2 >= ld64 136_2
:debug:main epoch: in tree: 1 installed: 1
:debug:main llvm-3.2 3.2_2 exists in the ports tree
:debug:main llvm-3.2 3.2_2  is the latest installed
:debug:main llvm-3.2 3.2_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/llvm-3.2
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! llvm-3.2 3.2_2 >= llvm-3.2 3.2_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libffi 3.0.13_0 exists in the ports tree
:debug:main libffi 3.0.13_0  is the latest installed
:debug:main libffi 3.0.13_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! libffi 3.0.13_0 >= libffi 3.0.13_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.4_0 exists in the ports tree
:debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
:debug:main perl5 5.12.4_0 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.4_2 exists in the ports tree
:debug:main perl5.12 5.12.4_2  is the latest installed
:debug:main perl5.12 5.12.4_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! perl5.12 5.12.4_2 >= perl5.12 5.12.4_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.10_2 exists in the ports tree
:debug:main gdbm 1.10_2  is the latest installed
:debug:main gdbm 1.10_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main llvm_select 0.2_0 exists in the ports tree
:debug:main llvm_select 0.2_0  is the latest installed
:debug:main llvm_select 0.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/llvm_select
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! llvm_select 0.2_0 >= llvm_select 0.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cctools 839_2 exists in the ports tree
:debug:main cctools 839_2 +llvm32 is the latest installed
:debug:main cctools 839_2 +llvm32 is active
:debug:main Merging existing variants '+llvm32' into variants
:debug:main new fully merged portvariants: llvm32 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cctools
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant llvm32 provides llvm32
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! cctools 839_2 >= cctools 839_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main cctools-headers 839_0 exists in the ports tree
:debug:main cctools-headers 839_0  is the latest installed
:debug:main cctools-headers 839_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cctools-headers
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! cctools-headers 839_0 >= cctools-headers 839_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main libgcc 4.8.1_2 exists in the ports tree
:debug:main libgcc 4.8.1_2  is the latest installed
:debug:main libgcc 4.8.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/gcc48
:debug:main OS darwin/12.4.0 (Mac OS X 10.8) arch i386
:debug:main compiler llvm-gcc-4.2 2336.11.00 not blacklisted because does not match {llvm-gcc-4.2 < 2336.1}
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies
:debug:main Running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies
:debug:main No need to upgrade! libgcc 4.8.1_2 >= libgcc 4.8.1_2
:msg:main --->  Computing dependencies for gsl:info:main .:debug:main Checking for conflicts against gsl
:debug:main Searching for dependency: gsl-devel
:debug:main Didn't find receipt, going to depspec regex for: gsl-devel
:debug:main Searching for dependency: texinfo
:debug:main Found Dependency: receipt exists for texinfo
:debug:main Searching for dependency: gcc47
:debug:main Found Dependency: receipt exists for gcc47
:msg:main 
:debug:main Executing org.macports.main (gsl)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 503
:debug:archivefetch archivefetch phase started at Mon Aug 19 12:24:01 CEST 2013
:msg:archivefetch --->  Fetching archive for gsl
:debug:archivefetch Executing org.macports.archivefetch (gsl)
:debug:archivefetch euid/egid changed to: 0/0
:debug:archivefetch chowned /opt/local/var/macports/incoming to macports
:debug:archivefetch euid/egid changed to: 503/501
:info:archivefetch --->  gsl-1.16_0+gcc47+optimize.darwin_12.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
:msg:archivefetch --->  Attempting to fetch gsl-1.16_0+gcc47+optimize.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/gsl
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:msg:archivefetch --->  Attempting to fetch gsl-1.16_0+gcc47+optimize.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/gsl
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:msg:archivefetch --->  Attempting to fetch gsl-1.16_0+gcc47+optimize.darwin_12.x86_64.tbz2 from http://packages.macports.org/gsl
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:debug:archivefetch Privilege de-escalation not attempted as not running as root.
:debug:fetch fetch phase started at Mon Aug 19 12:24:01 CEST 2013
:notice:fetch --->  Fetching distfiles for gsl
:debug:fetch Executing org.macports.fetch (gsl)
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Mon Aug 19 12:24:01 CEST 2013
:notice:checksum --->  Verifying checksums for gsl
:debug:checksum Executing org.macports.checksum (gsl)
:info:checksum --->  Checksumming gsl-1.16.tar.gz
:debug:checksum Correct (rmd160) checksum for gsl-1.16.tar.gz
:debug:checksum Correct (sha256) checksum for gsl-1.16.tar.gz
:debug:checksum Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Mon Aug 19 12:24:01 CEST 2013
:notice:extract --->  Extracting gsl
:debug:extract Executing org.macports.extract (gsl)
:info:extract --->  Extracting gsl-1.16.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/gsl/gsl-1.16.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/gsl/gsl-1.16.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/gsl/gsl-1.16.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - 
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work to macports
:debug:extract euid/egid changed to: 503/501
:debug:extract Privilege de-escalation not attempted as not running as root.
:debug:patch patch phase started at Mon Aug 19 12:24:02 CEST 2013
:debug:patch Executing org.macports.patch (gsl)
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Mon Aug 19 12:24:02 CEST 2013
:notice:configure --->  Configuring gsl
:debug:configure Using compiler 'MacPorts GCC 4.7'
:debug:configure Executing org.macports.configure (gsl)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -Os -march=native -ftree-vectorize -O3 -m64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -Os -m64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/opt/local/bin/g++-mp-4.7' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -Os -m64' LDFLAGS='-L/opt/local/lib -Wl,-headerpad_max_install_names' __CFPREFERENCES_AVOID_DAEMON='1' FCFLAGS='-pipe -Os -m64' OBJC='/opt/local/bin/gcc-mp-4.7' INSTALL='/usr/bin/install -c' F90='/opt/local/bin/gfortran-mp-4.7' FC='/opt/local/bin/gfortran-mp-4.7' FFLAGS='-pipe -Os -m64' OBJCFLAGS='-pipe -Os -m64' F77='/opt/local/bin/gfortran-mp-4.7' CC_PRINT_OPTIONS='YES' CC='/opt/local/bin/gcc-mp-4.7'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --infodir=/opt/local/share/info'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --infodir=/opt/local/share/info 
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
:info:configure checking for gawk... gawk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking whether make supports nested variables... yes
:info:configure checking whether to enable maintainer-specific portions of Makefiles... no
:info:configure checking for a sed that does not truncate output... /opt/local/bin/gsed
:info:configure checking whether make sets $(MAKE)... (cached) yes
:info:configure checking build system type... x86_64-apple-darwin12.4.0
:info:configure checking host system type... x86_64-apple-darwin12.4.0
:info:configure checking for gcc... /opt/local/bin/gcc-mp-4.7
:info:configure checking whether the C compiler works... yes
:info:configure checking for C compiler default output file name... a.out
:info:configure checking for suffix of executables... 
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /opt/local/bin/gcc-mp-4.7 accepts -g... yes
:info:configure checking for /opt/local/bin/gcc-mp-4.7 option to accept ISO C89... none needed
:info:configure checking for style of include used by make... GNU
:info:configure checking dependency style of /opt/local/bin/gcc-mp-4.7... gcc3
:info:configure checking how to run the C preprocessor... /opt/local/bin/gcc-mp-4.7 -E
:info:configure checking whether ln -s works... yes
:info:configure checking how to print strings... printf
:info:configure checking for a sed that does not truncate output... (cached) /opt/local/bin/gsed
:info:configure checking for grep that handles long lines and -e... /usr/bin/grep
:info:configure checking for egrep... /usr/bin/grep -E
:info:configure checking for fgrep... /usr/bin/grep -F
:info:configure checking for ld used by /opt/local/bin/gcc-mp-4.7... /opt/local/bin/ld
:info:configure checking if the linker (/opt/local/bin/ld) is GNU ld... no
:info:configure checking for BSD- or MS-compatible name lister (nm)... /opt/local/bin/nm
:info:configure checking the name lister (/opt/local/bin/nm) interface... BSD nm
:info:configure checking the maximum length of command line arguments... 196608
:info:configure checking whether the shell understands some XSI constructs... yes
:info:configure checking whether the shell understands "+="... yes
:info:configure checking how to convert x86_64-apple-darwin12.4.0 file names to x86_64-apple-darwin12.4.0 format... func_convert_file_noop
:info:configure checking how to convert x86_64-apple-darwin12.4.0 file names to toolchain format... func_convert_file_noop
:info:configure checking for /opt/local/bin/ld option to reload object files... -r
:info:configure checking for objdump... no
:info:configure checking how to recognize dependent libraries... pass_all
:info:configure checking for dlltool... no
:info:configure checking how to associate runtime and link libraries... printf %s\n
:info:configure checking for ar... ar
:info:configure checking for archiver @FILE support... no
:info:configure checking for strip... strip
:info:configure checking for ranlib... ranlib
:info:configure checking command to parse /opt/local/bin/nm output from /opt/local/bin/gcc-mp-4.7 object... ok
:info:configure checking for sysroot... no
:info:configure checking for mt... no
:info:configure checking if : is a manifest tool... no
:info:configure checking for dsymutil... dsymutil
:info:configure checking for nmedit... nmedit
:info:configure checking for lipo... lipo
:info:configure checking for otool... otool
:info:configure checking for otool64... no
:info:configure checking for -single_module linker flag... yes
:info:configure checking for -exported_symbols_list linker flag... yes
:info:configure checking for -force_load linker flag... yes
:info:configure checking for ANSI C header files... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking for dlfcn.h... yes
:info:configure checking for objdir... .libs
:info:configure checking if /opt/local/bin/gcc-mp-4.7 supports -fno-rtti -fno-exceptions... no
:info:configure checking for /opt/local/bin/gcc-mp-4.7 option to produce PIC... -fno-common -DPIC
:info:configure checking if /opt/local/bin/gcc-mp-4.7 PIC flag -fno-common -DPIC works... yes
:info:configure checking if /opt/local/bin/gcc-mp-4.7 static flag -static works... no
:info:configure checking if /opt/local/bin/gcc-mp-4.7 supports -c -o file.o... yes
:info:configure checking if /opt/local/bin/gcc-mp-4.7 supports -c -o file.o... (cached) yes
:info:configure checking whether the /opt/local/bin/gcc-mp-4.7 linker (/opt/local/bin/ld) supports shared libraries... yes
:info:configure checking dynamic linker characteristics... darwin12.4.0 dyld
:info:configure checking how to hardcode library paths into programs... immediate
:info:configure checking whether stripping libraries is possible... yes
:info:configure checking if libtool supports shared libraries... yes
:info:configure checking whether to build shared libraries... yes
:info:configure checking whether to build static libraries... yes
:info:configure checking for size_t... yes
:info:configure checking for working volatile... yes
:info:configure checking for inline... inline
:info:configure checking whether char is unsigned... no
:info:configure checking for GNU-style extern inline... no
:info:configure checking for C99-style inline... yes
:info:configure checking ieeefp.h usability... no
:info:configure checking ieeefp.h presence... no
:info:configure checking for ieeefp.h... no
:info:configure checking for vprintf... yes
:info:configure checking for _doprnt... no
:info:configure checking for memcpy... yes
:info:configure checking for memmove... yes
:info:configure checking for strdup... yes
:info:configure checking for strtol... yes
:info:configure checking for strtoul... yes
:info:configure checking for EXIT_SUCCESS and EXIT_FAILURE... yes
:info:configure checking for cos in -lm... yes
:info:configure checking whether feenableexcept is declared... no
:info:configure checking whether fesettrapenable is declared... no
:info:configure checking whether hypot is declared... yes
:info:configure checking whether expm1 is declared... yes
:info:configure checking whether acosh is declared... yes
:info:configure checking whether asinh is declared... yes
:info:configure checking whether atanh is declared... yes
:info:configure checking whether ldexp is declared... yes
:info:configure checking whether frexp is declared... yes
:info:configure checking whether fprnd_t is declared... no
:info:configure checking whether isinf is declared... yes
:info:configure checking whether isfinite is declared... yes
:info:configure checking whether finite is declared... yes
:info:configure checking whether isnan is declared... yes
:info:configure checking whether log1p is declared... yes
:info:configure checking for long double stdio... yes
:info:configure checking for extended floating point registers... yes
:info:configure checking for IEEE arithmetic interface type... unknown
:info:configure checking for IEEE compiler flags... none
:info:configure checking for IEEE comparisons... no
:info:configure checking for IEEE denormalized values... no
:info:configure checking that generated files are newer than configure... done
:info:configure configure: creating ./config.status
:info:configure config.status: creating gsl_version.h
:info:configure config.status: creating gsl.spec
:info:configure config.status: creating gsl/Makefile
:info:configure config.status: creating test/Makefile
:info:configure config.status: creating err/Makefile
:info:configure config.status: creating sys/Makefile
:info:configure config.status: creating utils/Makefile
:info:configure config.status: creating const/Makefile
:info:configure config.status: creating min/Makefile
:info:configure config.status: creating multimin/Makefile
:info:configure config.status: creating ieee-utils/Makefile
:info:configure config.status: creating fft/Makefile
:info:configure config.status: creating specfunc/Makefile
:info:configure config.status: creating dht/Makefile
:info:configure config.status: creating fit/Makefile
:info:configure config.status: creating multifit/Makefile
:info:configure config.status: creating bspline/Makefile
:info:configure config.status: creating statistics/Makefile
:info:configure config.status: creating sum/Makefile
:info:configure config.status: creating roots/Makefile
:info:configure config.status: creating multiroots/Makefile
:info:configure config.status: creating ntuple/Makefile
:info:configure config.status: creating poly/Makefile
:info:configure config.status: creating qrng/Makefile
:info:configure config.status: creating rng/Makefile
:info:configure config.status: creating randist/Makefile
:info:configure config.status: creating siman/Makefile
:info:configure config.status: creating integration/Makefile
:info:configure config.status: creating interpolation/Makefile
:info:configure config.status: creating doc/Makefile
:info:configure config.status: creating block/Makefile
:info:configure config.status: creating vector/Makefile
:info:configure config.status: creating matrix/Makefile
:info:configure config.status: creating histogram/Makefile
:info:configure config.status: creating monte/Makefile
:info:configure config.status: creating ode-initval/Makefile
:info:configure config.status: creating ode-initval2/Makefile
:info:configure config.status: creating cblas/Makefile
:info:configure config.status: creating blas/Makefile
:info:configure config.status: creating linalg/Makefile
:info:configure config.status: creating eigen/Makefile
:info:configure config.status: creating permutation/Makefile
:info:configure config.status: creating combination/Makefile
:info:configure config.status: creating multiset/Makefile
:info:configure config.status: creating sort/Makefile
:info:configure config.status: creating complex/Makefile
:info:configure config.status: creating diff/Makefile
:info:configure config.status: creating deriv/Makefile
:info:configure config.status: creating cheb/Makefile
:info:configure config.status: creating cdf/Makefile
:info:configure config.status: creating wavelet/Makefile
:info:configure config.status: creating Makefile
:info:configure config.status: creating config.h
:info:configure config.status: executing depfiles commands
:info:configure config.status: executing libtool commands
:debug:configure Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Mon Aug 19 12:24:12 CEST 2013
:notice:build --->  Building gsl
:debug:build Executing org.macports.build (gsl)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16" && /usr/bin/make -j8 -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16" && /usr/bin/make -j8 -w all 
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16'
:info:build /usr/bin/make  all-recursive
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16'
:info:build Making all in gsl
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16/gsl'
:info:build rm -f gsl*.h
:info:build HEADERLIST="../gsl*.h ../*/gsl*.h"; \
:info:build     for h in $HEADERLIST; do \
:info:build       BASENAME=`basename $h`; \
:info:build       test -r $BASENAME || ln -s $h $BASENAME; \
:info:build     done
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16/gsl'
:info:build Making all in utils
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16/utils'
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I..   -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT placeholder.lo -MD -MP -MF .deps/placeholder.Tpo -c -o placeholder.lo placeholder.c
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT placeholder.lo -MD -MP -MF .deps/placeholder.Tpo -c placeholder.c  -fno-common -DPIC -o .libs/placeholder.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT placeholder.lo -MD -MP -MF .deps/placeholder.Tpo -c placeholder.c -o placeholder.o >/dev/null 2>&1
:info:build mv -f .deps/placeholder.Tpo .deps/placeholder.Plo
:info:build /bin/sh ../libtool  --tag=CC   --mode=link /opt/local/bin/gcc-mp-4.7  -pipe -Os -march=native -ftree-vectorize -O3 -m64  -L/opt/local/lib -Wl,-headerpad_max_install_names -o libutils.la  placeholder.lo  -lm 
:info:build libtool: link: ar cru .libs/libutils.a .libs/placeholder.o 
:info:build libtool: link: ranlib .libs/libutils.a
:info:build libtool: link: ( cd ".libs" && rm -f "libutils.la" && ln -s "../libutils.la" "libutils.la" )
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16/utils'
:info:build Making all in sys
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16/sys'
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT minmax.lo -MD -MP -MF .deps/minmax.Tpo -c -o minmax.lo minmax.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT prec.lo -MD -MP -MF .deps/prec.Tpo -c -o prec.lo prec.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT hypot.lo -MD -MP -MF .deps/hypot.Tpo -c -o hypot.lo hypot.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT log1p.lo -MD -MP -MF .deps/log1p.Tpo -c -o log1p.lo log1p.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT expm1.lo -MD -MP -MF .deps/expm1.Tpo -c -o expm1.lo expm1.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT coerce.lo -MD -MP -MF .deps/coerce.Tpo -c -o coerce.lo coerce.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT invhyp.lo -MD -MP -MF .deps/invhyp.Tpo -c -o invhyp.lo invhyp.c
:info:build /bin/sh ../libtool  --tag=CC   --mode=compile /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I..  -I/opt/local/include  -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT pow_int.lo -MD -MP -MF .deps/pow_int.Tpo -c -o pow_int.lo pow_int.c
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT invhyp.lo -MD -MP -MF .deps/invhyp.Tpo -c invhyp.c  -fno-common -DPIC -o .libs/invhyp.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT pow_int.lo -MD -MP -MF .deps/pow_int.Tpo -c pow_int.c  -fno-common -DPIC -o .libs/pow_int.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT hypot.lo -MD -MP -MF .deps/hypot.Tpo -c hypot.c  -fno-common -DPIC -o .libs/hypot.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT coerce.lo -MD -MP -MF .deps/coerce.Tpo -c coerce.c  -fno-common -DPIC -o .libs/coerce.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT expm1.lo -MD -MP -MF .deps/expm1.Tpo -c expm1.c  -fno-common -DPIC -o .libs/expm1.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT log1p.lo -MD -MP -MF .deps/log1p.Tpo -c log1p.c  -fno-common -DPIC -o .libs/log1p.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT minmax.lo -MD -MP -MF .deps/minmax.Tpo -c minmax.c  -fno-common -DPIC -o .libs/minmax.o
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT prec.lo -MD -MP -MF .deps/prec.Tpo -c prec.c  -fno-common -DPIC -o .libs/prec.o
:info:build {standard input}:8:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:9:no such instruction: `vmovsd LC0(%rip), %xmm0'
:info:build {standard input}:10:no such instruction: `vmovsd %xmm1, (%rsp)'
:info:build {standard input}:11:no such instruction: `vaddsd %xmm0, %xmm1,%xmm2'
:info:build {standard input}:12:no such instruction: `vmovsd %xmm2, 32(%rsp)'
:info:build {standard input}:13:no such instruction: `vmovsd 32(%rsp), %xmm2'
:info:build {standard input}:14:no such instruction: `vsubsd %xmm0, %xmm2,%xmm0'
:info:build {standard input}:15:no such instruction: `vmovsd %xmm0, 40(%rsp)'
:info:build {standard input}:16:no such instruction: `vmovsd 32(%rsp), %xmm0'
:info:build {standard input}:18:no such instruction: `vmovsd 40(%rsp), %xmm3'
:info:build {standard input}:19:no such instruction: `vmovsd (%rsp), %xmm1'
:info:build {standard input}:20:no such instruction: `vmovsd 32(%rsp), %xmm2'
:info:build {standard input}:23:no such instruction: `vsubsd %xmm1, %xmm3,%xmm1'
:info:build {standard input}:24:no such instruction: `vdivsd %xmm2, %xmm1,%xmm1'
:info:build {standard input}:25:no such instruction: `vsubsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:6:no such instruction: `vmovsd %xmm0, -8(%rsp)'
:info:build {standard input}:7:no such instruction: `vmovsd -8(%rsp), %xmm0'
:info:build {standard input}:14:no such instruction: `vmovss %xmm0, -4(%rsp)'
:info:build {standard input}:15:no such instruction: `vmovss -4(%rsp), %xmm0'
:info:build make[2]: *** [coerce.lo] Error 1
:info:build make[2]: *** Waiting for unfinished jobs....
:info:build {standard input}:6:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:13:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:14:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:21:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:22:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:29:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:30:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:31:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:38:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:39:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:40:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:47:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:48:no such instruction: `vmulsd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:49:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:50:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:57:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:58:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:59:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:66:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:67:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:68:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:69:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:77:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:78:no such instruction: `vmovsd LC0(%rip), %xmm0'
:info:build {standard input}:84:no such instruction: `vmulsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:87:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:93:no such instruction: `vdivsd %xmm1, %xmm0,%xmm1'
:info:build {standard input}:101:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:102:no such instruction: `vmovsd LC0(%rip), %xmm0'
:info:build {standard input}:107:no such instruction: `vmulsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:110:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build make[2]: *** [log1p.lo] Error 1
:info:build make[2]: *** [pow_int.lo] Error 1
:info:build libtool: compile:  /opt/local/bin/gcc-mp-4.7 -DHAVE_CONFIG_H -I. -I.. -I.. -I/opt/local/include -pipe -Os -march=native -ftree-vectorize -O3 -m64 -MT prec.lo -MD -MP -MF .deps/prec.Tpo -c prec.c -o prec.o >/dev/null 2>&1
:info:build {standard input}:24:no such instruction: `vmaxsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:31:no such instruction: `vminsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:61:no such instruction: `vmaxsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:68:no such instruction: `vminsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:6:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:13:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:14:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:21:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:22:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:29:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:30:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:31:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:38:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:39:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:40:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:47:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:48:no such instruction: `vmulsd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:49:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:50:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:57:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:58:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:59:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:66:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:67:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:68:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:69:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:94:no such instruction: `vmaxsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:101:no such instruction: `vminsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:131:no such instruction: `vmovsd LC2(%rip), %xmm4'
:info:build {standard input}:132:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:133:no such instruction: `vmovsd LC3(%rip), %xmm2'
:info:build {standard input}:134:no such instruction: `vandpd %xmm4, %xmm1,%xmm1'
:info:build {standard input}:135:no such instruction: `vucomisd %xmm1, %xmm2'
:info:build {standard input}:137:no such instruction: `vmovsd LC1(%rip), %xmm7'
:info:build {standard input}:138:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:139:no such instruction: `vmovapd %xmm0, %xmm2'
:info:build {standard input}:140:no such instruction: `vmovapd %xmm7, %xmm3'
:info:build {standard input}:141:no such instruction: `vmovsd LC4(%rip), %xmm8'
:info:build {standard input}:144:no such instruction: `vaddsd %xmm7, %xmm3,%xmm3'
:info:build {standard input}:145:no such instruction: `vdivsd %xmm3, %xmm0,%xmm5'
:info:build {standard input}:146:no such instruction: `vmulsd %xmm5, %xmm1,%xmm1'
:info:build {standard input}:147:no such instruction: `vaddsd %xmm1, %xmm2,%xmm2'
:info:build {standard input}:148:no such instruction: `vmovapd %xmm1, %xmm6'
:info:build {standard input}:149:no such instruction: `vandpd %xmm4, %xmm6,%xmm6'
:info:build {standard input}:150:no such instruction: `vmovapd %xmm2, %xmm5'
:info:build {standard input}:151:no such instruction: `vandpd %xmm4, %xmm5,%xmm5'
:info:build {standard input}:152:no such instruction: `vmulsd %xmm8, %xmm5,%xmm5'
:info:build {standard input}:153:no such instruction: `vucomisd %xmm5, %xmm6'
:info:build {standard input}:155:no such instruction: `vmovapd %xmm2, %xmm0'
:info:build {standard input}:162:no such instruction: `vsubsd LC1(%rip), %xmm0,%xmm2'
:info:build {standard input}:165:no such instruction: `vmovapd %xmm2, %xmm0'
:info:build make[2]: *** [minmax.lo] Error 1
:info:build make[2]: *** [expm1.lo] Error 1
:info:build {standard input}:6:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:13:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:14:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:21:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:22:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:29:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:30:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:31:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:38:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:39:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:40:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:47:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:48:no such instruction: `vmulsd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:49:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:50:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:57:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:58:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:59:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:66:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:67:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:68:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:69:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:94:no such instruction: `vmaxsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:101:no such instruction: `vminsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:133:no such instruction: `vmovsd %xmm0, 32(%rsp)'
:info:build {standard input}:134:no such instruction: `vmovsd %xmm1, 40(%rsp)'
:info:build {standard input}:139:no such instruction: `vmovsd LC1(%rip), %xmm1'
:info:build {standard input}:141:no such instruction: `vmovapd %xmm1, %xmm0'
:info:build {standard input}:148:no such instruction: `vmovsd 40(%rsp), %xmm0'
:info:build {standard input}:152:no such instruction: `vmovsd LC2(%rip), %xmm0'
:info:build {standard input}:153:no such instruction: `vmovsd 40(%rsp), %xmm1'
:info:build {standard input}:154:no such instruction: `vmovsd 32(%rsp), %xmm2'
:info:build {standard input}:155:no such instruction: `vandpd %xmm0, %xmm2,%xmm2'
:info:build {standard input}:156:no such instruction: `vandpd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:157:no such instruction: `vmovapd %xmm2, %xmm1'
:info:build {standard input}:158:no such instruction: `vucomisd %xmm2, %xmm0'
:info:build {standard input}:160:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:161:no such instruction: `vmovapd %xmm2, %xmm0'
:info:build {standard input}:163:no such instruction: `vucomisd LC3(%rip), %xmm0'
:info:build {standard input}:167:no such instruction: `vdivsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:168:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:169:no such instruction: `vaddsd LC4(%rip), %xmm0,%xmm0'
:info:build {standard input}:170:no such instruction: `vsqrtsd %xmm0, %xmm2,%xmm2'
:info:build {standard input}:171:no such instruction: `vucomisd %xmm2, %xmm2'
:info:build {standard input}:174:no such instruction: `vmulsd %xmm2, %xmm1,%xmm1'
:info:build {standard input}:177:no such instruction: `vmovsd %xmm1, (%rsp)'
:info:build {standard input}:179:no such instruction: `vmovsd (%rsp), %xmm1'
:info:build {standard input}:180:no such instruction: `vmovapd %xmm0, %xmm2'
:info:build {standard input}:187:no such instruction: `vmovapd %xmm0, %xmm3'
:info:build {standard input}:188:no such instruction: `vmovsd LC2(%rip), %xmm0'
:info:build {standard input}:189:no such instruction: `vandpd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:190:no such instruction: `vandpd %xmm0, %xmm2,%xmm2'
:info:build {standard input}:191:no such instruction: `vandpd %xmm0, %xmm3,%xmm3'
:info:build {standard input}:192:no such instruction: `vucomisd %xmm2, %xmm1'
:info:build {standard input}:193:no such instruction: `vmovapd %xmm3, %xmm4'
:info:build {standard input}:195:no such instruction: `vucomisd %xmm1, %xmm3'
:info:build {standard input}:199:no such instruction: `vxorpd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:200:no such instruction: `vucomisd %xmm0, %xmm4'
:info:build {standard input}:209:no such instruction: `vucomisd %xmm2, %xmm3'
:info:build {standard input}:212:no such instruction: `vucomisd %xmm2, %xmm1'
:info:build {standard input}:213:no such instruction: `vmovapd %xmm2, %xmm4'
:info:build {standard input}:216:no such instruction: `vxorpd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:217:no such instruction: `vmovapd %xmm1, %xmm4'
:info:build {standard input}:218:no such instruction: `vucomisd %xmm0, %xmm4'
:info:build {standard input}:222:no such instruction: `vdivsd %xmm4, %xmm3,%xmm3'
:info:build {standard input}:223:no such instruction: `vdivsd %xmm4, %xmm1,%xmm1'
:info:build {standard input}:224:no such instruction: `vdivsd %xmm4, %xmm2,%xmm2'
:info:build {standard input}:225:no such instruction: `vmulsd %xmm3, %xmm3,%xmm3'
:info:build {standard input}:226:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:227:no such instruction: `vmulsd %xmm2, %xmm2,%xmm2'
:info:build {standard input}:228:no such instruction: `vaddsd %xmm1, %xmm3,%xmm1'
:info:build {standard input}:229:no such instruction: `vaddsd %xmm2, %xmm1,%xmm2'
:info:build {standard input}:230:no such instruction: `vsqrtsd %xmm2, %xmm0,%xmm0'
:info:build {standard input}:231:no such instruction: `vucomisd %xmm0, %xmm0'
:info:build {standard input}:233:no such instruction: `vmulsd %xmm0, %xmm4,%xmm0'
:info:build {standard input}:236:no such instruction: `vmovapd %xmm2, %xmm0'
:info:build {standard input}:239:no such instruction: `vmovsd %xmm4, (%rsp)'
:info:build {standard input}:241:no such instruction: `vmovsd (%rsp), %xmm4'
:info:build {standard input}:244:no such instruction: `vmulsd %xmm0, %xmm4,%xmm0'
:info:build make[2]: *** [hypot.lo] Error 1
:info:build {standard input}:6:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:13:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:14:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:21:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:22:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:29:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:30:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:31:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:38:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:39:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:40:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:47:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:48:no such instruction: `vmulsd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:49:no such instruction: `vmulsd %xmm1, %xmm1,%xmm1'
:info:build {standard input}:50:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:57:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:58:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:59:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:66:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:67:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:68:no such instruction: `vmulsd %xmm0, %xmm0,%xmm1'
:info:build {standard input}:69:no such instruction: `vmulsd %xmm0, %xmm1,%xmm0'
:info:build {standard input}:94:no such instruction: `vmaxsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:101:no such instruction: `vminsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:133:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:134:no such instruction: `vucomisd LC3(%rip), %xmm0'
:info:build {standard input}:136:no such instruction: `vucomisd LC5(%rip), %xmm0'
:info:build {standard input}:138:no such instruction: `vmovsd LC6(%rip), %xmm0'
:info:build {standard input}:139:no such instruction: `vucomisd %xmm0, %xmm1'
:info:build {standard input}:143:no such instruction: `vmovsd LC2(%rip), %xmm0'
:info:build {standard input}:150:no such instruction: `vsubsd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:151:no such instruction: `vmulsd %xmm1, %xmm1,%xmm0'
:info:build {standard input}:152:no such instruction: `vaddsd %xmm1, %xmm1,%xmm2'
:info:build {standard input}:153:no such instruction: `vaddsd %xmm0, %xmm2,%xmm2'
:info:build {standard input}:154:no such instruction: `vsqrtsd %xmm2, %xmm0,%xmm0'
:info:build {standard input}:155:no such instruction: `vucomisd %xmm0, %xmm0'
:info:build {standard input}:158:no such instruction: `vaddsd %xmm1, %xmm0,%xmm0'
:info:build {standard input}:166:no such instruction: `vaddsd LC4(%rip), %xmm0,%xmm0'
:info:build {standard input}:173:no such instruction: `vmulsd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:174:no such instruction: `vmovsd LC6(%rip), %xmm3'
:info:build {standard input}:175:no such instruction: `vsubsd %xmm3, %xmm0,%xmm0'
:info:build {standard input}:176:no such instruction: `vsqrtsd %xmm0, %xmm2,%xmm2'
:info:build {standard input}:177:no such instruction: `vucomisd %xmm2, %xmm2'
:info:build {standard input}:180:no such instruction: `vaddsd %xmm1, %xmm1,%xmm0'
:info:build {standard input}:181:no such instruction: `vaddsd %xmm1, %xmm2,%xmm1'
:info:build {standard input}:182:no such instruction: `vdivsd %xmm1, %xmm3,%xmm3'
:info:build {standard input}:183:no such instruction: `vsubsd %xmm3, %xmm0,%xmm0'
:info:build {standard input}:191:no such instruction: `vxorpd %xmm0, %xmm0,%xmm0'
:info:build {standard input}:197:no such instruction: `vmovsd %xmm1, (%rsp)'
:info:build {standard input}:198:no such instruction: `vmovsd %xmm3, 32(%rsp)'
:info:build {standard input}:200:no such instruction: `vmovsd 32(%rsp), %xmm3'
:info:build {standard input}:201:no such instruction: `vmovapd %xmm0, %xmm2'
:info:build {standard input}:202:no such instruction: `vmovsd (%rsp), %xmm1'
:info:build {standard input}:205:no such instruction: `vmovapd %xmm2, %xmm0'
:info:build {standard input}:206:no such instruction: `vmovsd %xmm1, (%rsp)'
:info:build {standard input}:208:no such instruction: `vmovsd (%rsp), %xmm1'
:info:build {standard input}:215:no such instruction: `vxorpd %xmm2, %xmm2,%xmm2'
:info:build {standard input}:218:no such instruction: `vmovsd LC8(%rip), %xmm1'
:info:build {standard input}:219:no such instruction: `vucomisd %xmm0, %xmm2'
:info:build {standard input}:220:no such instruction: `vandpd %xmm0, %xmm1,%xmm1'
:info:build {standard input}:222:no such instruction: `vucomisd LC3(%rip), %xmm1'
:info:build {standard input}:223:no such instruction: `vmovsd LC6(%rip), %xmm2'
:info:build {standard input}:226:no such instruction: `vucomisd LC5(%rip), %xmm1'
:info:build {standard input}:228:no such instruction: `vucomisd LC9(%rip), %xmm1'
:info:build {standard input}:236:no such instruction: `vmulsd %xmm1, %xmm1,%xmm5'
:info:build {standard input}:237:no such instruction: `vmovsd LC6(%rip), %xmm3'
:info:build {standard input}:238:no such instruction: `vaddsd %xmm3, %xmm5,%xmm0'
:info:build {standard input}:239:no such instruction: `vsqrtsd %xmm0, %xmm4,%xmm4'
:info:build {standard input}:240:no such instruction: `vucomisd %xmm4, %xmm4'
:info:build {standard input}:243:no such instruction: `vaddsd %xmm3, %xmm4,%xmm3'
:info:build {standard input}:244:no such instruction: `vmovsd %xmm2, (%rsp)'
:info:build {standard input}:245:no such instruction: `vdivsd %xmm3, %xmm5,%xmm5'
:info:build {standard input}:246:no such instruction: `vaddsd %xmm1, %xmm5,%xmm0'
:info:build {standard input}:248:no such instruction: `vmovsd (%rsp), %xmm2'
:info:build {standard input}:251:no such instruction: `vmulsd %xmm0, %xmm2,%xmm0'
:info:build {standard input}:256:no such instruction: `vucomisd LC3(%rip), %xmm1'
:info:build {standard input}:257:no such instruction: `vmovsd LC7(%rip), %xmm2'
:info:build {standard input}:260:no such instruction: `vmovapd %xmm1, %xmm0'
:info:build {standard input}:261:no such instruction: `vmovsd %xmm2, (%rsp)'
:info:build {standard input}:263:no such instruction: `vaddsd LC4(%rip), %xmm0,%xmm0'
:info:build {standard input}:264:no such instruction: `vmovsd (%rsp), %xmm2'
:info:build {standard input}:267:no such instruction: `vmulsd %xmm0, %xmm2,%xmm0'
:info:build {standard input}:272:no such instruction: `vmulsd %xmm1, %xmm1,%xmm0'
:info:build {standard input}:273:no such instruction: `vmovsd LC6(%rip), %xmm3'
:info:build {standard input}:274:no such instruction: `vaddsd %xmm3, %xmm0,%xmm0'
:info:build {standard input}:275:no such instruction: `vsqrtsd %xmm0, %xmm4,%xmm4'
:info:build {standard input}:276:no such instruction: `vucomisd %xmm4, %xmm4'
:info:build {standard input}:279:no such instruction: `vaddsd %xmm1, %xmm1,%xmm0'
:info:build {standard input}:280:no such instruction: `vmovsd %xmm2, (%rsp)'
:info:build {standard input}:281:no such instruction: `vaddsd %xmm1, %xmm4,%xmm1'
:info:build {standard input}:282:no such instruction: `vdivsd %xmm1, %xmm3,%xmm3'
:info:build {standard input}:283:no such instruction: `vaddsd %xmm3, %xmm0,%xmm0'
:info:build {standard input}:285:no such instruction: `vmovsd (%rsp), %xmm2'
:info:build {standard input}:288:no such instruction: `vmulsd %xmm0, %xmm2,%xmm0'
:info:build {standard input}:292:no such instruction: `vmovsd %xmm1, 64(%rsp)'
:info:build {standard input}:293:no such instruction: `vmovsd %xmm2, (%rsp)'
:info:build {standard input}:294:no such instruction: `vmovsd %xmm3, 32(%rsp)'
:info:build {standard input}:296:no such instruction: `vmovsd 32(%rsp), %xmm3'
:info:build {standard input}:297:no such instruction: `vmovapd %xmm0, %xmm4'
:info:build {standard input}:298:no such instruction: `vmovsd (%rsp), %xmm2'
:info:build {standard input}:299:no such instruction: `vmovsd 64(%rsp), %xmm1'
:info:build {standard input}:302:no such instruction: `vmovsd %xmm1, 64(%rsp)'
:info:build {standard input}:303:no such instruction: `vmovsd %xmm2, (%rsp)'
:info:build {standard input}:304:no such instruction: `vmovsd %xmm3, 32(%rsp)'
:info:build {standard input}:305:no such instruction: `vmovsd %xmm5, 96(%rsp)'
:info:build {standard input}:307:no such instruction: `vmovsd 96(%rsp), %xmm5'
:info:build {standard input}:308:no such instruction: `vmovapd %xmm0, %xmm4'
:info:build {standard input}:309:no such instruction: `vmovsd 32(%rsp), %xmm3'
:info:build {standard input}:310:no such instruction: `vmovsd (%rsp), %xmm2'
:info:build {standard input}:311:no such instruction: `vmovsd 64(%rsp), %xmm1'
:info:build {standard input}:318:no such instruction: `vxorpd %xmm4, %xmm4,%xmm4'
:info:build {standard input}:321:no such instruction: `vmovapd %xmm0, %xmm1'
:info:build {standard input}:322:no such instruction: `vmovsd LC8(%rip), %xmm3'
:info:build {standard input}:323:no such instruction: `vucomisd %xmm0, %xmm4'
:info:build {standard input}:324:no such instruction: `vandpd %xmm1, %xmm3,%xmm3'
:info:build {standard input}:326:no such instruction: `vmovsd LC6(%rip), %xmm2'
:info:build {standard input}:327:no such instruction: `vmovapd %xmm2, %xmm5'
:info:build {standard input}:329:no such instruction: `vucomisd %xmm2, %xmm3'
:info:build {standard input}:330:no such instruction: `vmovsd LC2(%rip), %xmm0'
:info:build {standard input}:341:no such instruction: `vucomisd LC12(%rip), %xmm3'
:info:build {standard input}:343:no such instruction: `vucomisd LC13(%rip), %xmm3'
:info:build {standard input}:344:no such instruction: `vmovapd %xmm1, %xmm0'
:info:build {standard input}:346:no such instruction: `vaddsd %xmm3, %xmm3,%xmm0'
:info:build {standard input}:347:no such instruction: `vsubsd %xmm3, %xmm2,%xmm2'
:info:build {standard input}:348:no such instruction: `vmulsd %xmm3, %xmm0,%xmm1'
:info:build {standard input}:349:no such instruction: `vdivsd %xmm2, %xmm1,%xmm2'
:info:build {standard input}:350:no such instruction: `vaddsd %xmm2, %xmm0,%xmm0'
:info:build {standard input}:352:no such instruction: `vmovsd %xmm5, (%rsp)'
:info:build {standard input}:354:no such instruction: `vmovsd (%rsp), %xmm5'
:info:build {standard input}:355:no such instruction: `vmulsd LC12(%rip), %xmm5,%xmm5'
:info:build {standard input}:356:no such instruction: `vmulsd %xmm0, %xmm5,%xmm0'
:info:build {standard input}:360:no such instruction: `vmovsd LC7(%rip), %xmm5'
:info:build {standard input}:361:no such instruction: `vmovsd LC6(%rip), %xmm2'
:info:build {standard input}:366:no such instruction: `vucomisd %xmm1, %xmm4'
:info:build {standard input}:367:no such instruction: `vmovsd LC11(%rip), %xmm0'
:info:build {standard input}:369:no such instruction: `vmovsd LC10(%rip), %xmm0'
:info:build {standard input}:376:no such instruction: `vaddsd %xmm3, %xmm3,%xmm0'
:info:build {standard input}:377:no such instruction: `vsubsd %xmm3, %xmm2,%xmm2'
:info:build {standard input}:378:no such instruction: `vdivsd %xmm2, %xmm0,%xmm0'
:info:build make[2]: *** [invhyp.lo] Error 1
:info:build mv -f .deps/prec.Tpo .deps/prec.Plo
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16/sys'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16'
:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/work/gsl-1.16" && /usr/bin/make -j8 -w all 
:info:build Exit code: 2
:error:build org.macports.build for port gsl returned: command execution failed
:debug:build Error code: CHILDSTATUS 96812 2
:debug:build Backtrace: command execution failed
    while executing
"system -nice 0 $fullcmdstring"
    ("eval" body line 1)
    invoked from within
"eval system $notty $nice \$fullcmdstring"
    invoked from within
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: targets not executed for gsl: org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Please see the log file for port gsl for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_gsl/gsl/main.log