Context Navigation

Back to Ticket #42631

Ticket #42631: config.log

File config.log, 87.9 KB (added by pierswalter (Piers Uso Walter), 10 years ago)
/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/config.log

Line
1	This file contains any messages produced by compilers while
2	running configure, to aid debugging if configure makes a mistake.
3
4	It was created by wireshark configure 1.10.5, which was
5	generated by GNU Autoconf 2.68. Invocation command line was
6
7	$ ./configure --prefix=/opt/local --with-libsmi=/opt/local --disable-usr-local --with-adns=/opt/local --without-c-ares --with-geoip=/opt/local --with-gnutls=yes --with-libgcrypt-prefix=/opt/local --with-lua=/opt/local --enable-ipv6 --with-pcap=/opt/local --with-ssl=/opt/local --with-zlib=/opt/local --mandir=${prefix}/share/man --infodir=${prefix}/share/info --with-portaudio=/opt/local --disable-warnings-as-errors --with-krb5=/opt/local
8
9	## --------- ##
10	## Platform. ##
11	## --------- ##
12
13	hostname = eric.ilink.de
14	uname -m = i386
15	uname -r = 10.8.0
16	uname -s = Darwin
17	uname -v = Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
18
19	/usr/bin/uname -p = i386
20	/bin/uname -X = unknown
21
22	/bin/arch = unknown
23	/usr/bin/arch -k = unknown
24	/usr/convex/getsysinfo = unknown
25	/usr/bin/hostinfo = Mach kernel version:
26	Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
27	Kernel configured for up to 4 processors.
28	2 processors are physically available.
29	4 processors are logically available.
30	Processor type: i486 (Intel 80486)
31	Processors active: 0 1 2 3
32	Primary memory available: 8.00 gigabytes
33	Default processor set: 111 tasks, 691 threads, 4 processors
34	Load average: 1.22, Mach factor: 2.77
35	/bin/machine = unknown
36	/usr/bin/oslevel = unknown
37	/bin/universe = unknown
38
39	PATH: /opt/local/bin
40	PATH: /opt/local/sbin
41	PATH: /bin
42	PATH: /sbin
43	PATH: /usr/bin
44	PATH: /usr/sbin
45
46
47	## ----------- ##
48	## Core tests. ##
49	## ----------- ##
50
51	configure:2768: checking build system type
52	configure:2782: result: x86_64-apple-darwin10.8.0
53	configure:2802: checking host system type
54	configure:2815: result: x86_64-apple-darwin10.8.0
55	configure:2835: checking target system type
56	configure:2848: result: x86_64-apple-darwin10.8.0
57	configure:2891: checking for a BSD-compatible install
58	configure:2959: result: /usr/bin/install -c
59	configure:2970: checking whether build environment is sane
60	configure:3020: result: yes
61	configure:3161: checking for a thread-safe mkdir -p
62	configure:3200: result: ./install-sh -c -d
63	configure:3213: checking for gawk
64	configure:3229: found /opt/local/bin/gawk
65	configure:3240: result: gawk
66	configure:3251: checking whether make sets $(MAKE)
67	configure:3273: result: yes
68	configure:3348: checking how to create a ustar tar archive
69	configure:3361: tar --version
70	bsdtar 2.6.2 - libarchive 2.6.2
71	configure:3364: $? = 0
72	configure:3404: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
73	configure:3407: $? = 0
74	configure:3411: tar -xf - <conftest.tar
75	configure:3414: $? = 0
76	configure:3427: result: gnutar
77	configure:3526: checking for gcc
78	configure:3553: result: /usr/bin/gcc-4.2
79	configure:3782: checking for C compiler version
80	configure:3791: /usr/bin/gcc-4.2 --version >&5
81	i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5664)
82	Copyright (C) 2007 Free Software Foundation, Inc.
83	This is free software; see the source for copying conditions. There is NO
84	warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
85
86	configure:3802: $? = 0
87	configure:3791: /usr/bin/gcc-4.2 -v >&5
88	Using built-in specs.
89	Target: i686-apple-darwin10
90	Configured with: /var/tmp/gcc/gcc-5664~89/src/configure --disable-checking --enable-werror --prefix=/usr --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-transform-name=/^[cg][^.-]*$/s/$/-4.2/ --with-slibdir=/usr/lib --build=i686-apple-darwin10 --program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10 --target=i686-apple-darwin10 --with-gxx-include-dir=/include/c++/4.2.1
91	Thread model: posix
92	gcc version 4.2.1 (Apple Inc. build 5664)
93	configure:3802: $? = 0
94	configure:3791: /usr/bin/gcc-4.2 -V >&5
95	gcc-4.2: argument to `-V' is missing
96	configure:3802: $? = 1
97	configure:3791: /usr/bin/gcc-4.2 -qversion >&5
98	i686-apple-darwin10-gcc-4.2.1: no input files
99	configure:3802: $? = 1
100	configure:3822: checking whether the C compiler works
101	configure:3844: /usr/bin/gcc-4.2 -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c >&5
102	configure:3848: $? = 0
103	configure:3896: result: yes
104	configure:3899: checking for C compiler default output file name
105	configure:3901: result: a.out
106	configure:3907: checking for suffix of executables
107	configure:3914: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c >&5
108	configure:3918: $? = 0
109	configure:3940: result:
110	configure:3962: checking whether we are cross compiling
111	configure:3970: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c >&5
112	configure:3974: $? = 0
113	configure:3981: ./conftest
114	configure:3985: $? = 0
115	configure:4000: result: no
116	configure:4005: checking for suffix of object files
117	configure:4027: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
118	configure:4031: $? = 0
119	configure:4052: result: o
120	configure:4056: checking whether we are using the GNU C compiler
121	configure:4075: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
122	configure:4075: $? = 0
123	configure:4084: result: yes
124	configure:4093: checking whether /usr/bin/gcc-4.2 accepts -g
125	configure:4113: /usr/bin/gcc-4.2 -c -g -I/opt/local/include conftest.c >&5
126	configure:4113: $? = 0
127	configure:4154: result: yes
128	configure:4171: checking for /usr/bin/gcc-4.2 option to accept ISO C89
129	configure:4235: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
130	configure:4235: $? = 0
131	configure:4248: result: none needed
132	configure:4279: checking for style of include used by make
133	configure:4307: result: GNU
134	configure:4333: checking dependency style of /usr/bin/gcc-4.2
135	configure:4444: result: gcc3
136	configure:4460: checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together
137	configure:4491: /usr/bin/gcc-4.2 -c conftest.c -o conftest2.o >&5
138	configure:4495: $? = 0
139	configure:4501: /usr/bin/gcc-4.2 -c conftest.c -o conftest2.o >&5
140	configure:4505: $? = 0
141	configure:4516: cc -c conftest.c >&5
142	configure:4520: $? = 0
143	configure:4528: cc -c conftest.c -o conftest2.o >&5
144	configure:4532: $? = 0
145	configure:4538: cc -c conftest.c -o conftest2.o >&5
146	configure:4542: $? = 0
147	configure:4560: result: yes
148	configure:4697: checking for C++ compiler version
149	configure:4706: /usr/bin/g++-4.2 --version >&5
150	i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5664)
151	Copyright (C) 2007 Free Software Foundation, Inc.
152	This is free software; see the source for copying conditions. There is NO
153	warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
154
155	configure:4717: $? = 0
156	configure:4706: /usr/bin/g++-4.2 -v >&5
157	Using built-in specs.
158	Target: i686-apple-darwin10
159	Configured with: /var/tmp/gcc/gcc-5664~89/src/configure --disable-checking --enable-werror --prefix=/usr --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-transform-name=/^[cg][^.-]*$/s/$/-4.2/ --with-slibdir=/usr/lib --build=i686-apple-darwin10 --program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10 --target=i686-apple-darwin10 --with-gxx-include-dir=/include/c++/4.2.1
160	Thread model: posix
161	gcc version 4.2.1 (Apple Inc. build 5664)
162	configure:4717: $? = 0
163	configure:4706: /usr/bin/g++-4.2 -V >&5
164	g++-4.2: argument to `-V' is missing
165	configure:4717: $? = 1
166	configure:4706: /usr/bin/g++-4.2 -qversion >&5
167	i686-apple-darwin10-g++-4.2.1: no input files
168	configure:4717: $? = 1
169	configure:4721: checking whether we are using the GNU C++ compiler
170	configure:4740: /usr/bin/g++-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.cpp >&5
171	configure:4740: $? = 0
172	configure:4749: result: yes
173	configure:4758: checking whether /usr/bin/g++-4.2 accepts -g
174	configure:4778: /usr/bin/g++-4.2 -c -g -I/opt/local/include conftest.cpp >&5
175	configure:4778: $? = 0
176	configure:4819: result: yes
177	configure:4844: checking dependency style of /usr/bin/g++-4.2
178	configure:4955: result: gcc3
179	configure:4975: checking how to run the C preprocessor
180	configure:5006: /usr/bin/gcc-4.2 -E -I/opt/local/include conftest.c
181	configure:5006: $? = 0
182	configure:5020: /usr/bin/gcc-4.2 -E -I/opt/local/include conftest.c
183	conftest.c:14:28: error: ac_nonexistent.h: No such file or directory
184	configure:5020: $? = 1
185	configure: failed program was:
186	\| /* confdefs.h */
187	\| #define PACKAGE_NAME "wireshark"
188	\| #define PACKAGE_TARNAME "wireshark"
189	\| #define PACKAGE_VERSION "1.10.5"
190	\| #define PACKAGE_STRING "wireshark 1.10.5"
191	\| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/"
192	\| #define PACKAGE_URL "http://www.wireshark.org/"
193	\| #define PACKAGE "wireshark"
194	\| #define VERSION "1.10.5"
195	\| #define VERSION_MAJOR 1
196	\| #define VERSION_MINOR 10
197	\| #define VERSION_MICRO 5
198	\| /* end confdefs.h. */
199	\| #include <ac_nonexistent.h>
200	configure:5045: result: /usr/bin/gcc-4.2 -E
201	configure:5065: /usr/bin/gcc-4.2 -E -I/opt/local/include conftest.c
202	configure:5065: $? = 0
203	configure:5079: /usr/bin/gcc-4.2 -E -I/opt/local/include conftest.c
204	conftest.c:14:28: error: ac_nonexistent.h: No such file or directory
205	configure:5079: $? = 1
206	configure: failed program was:
207	\| /* confdefs.h */
208	\| #define PACKAGE_NAME "wireshark"
209	\| #define PACKAGE_TARNAME "wireshark"
210	\| #define PACKAGE_VERSION "1.10.5"
211	\| #define PACKAGE_STRING "wireshark 1.10.5"
212	\| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/"
213	\| #define PACKAGE_URL "http://www.wireshark.org/"
214	\| #define PACKAGE "wireshark"
215	\| #define VERSION "1.10.5"
216	\| #define VERSION_MAJOR 1
217	\| #define VERSION_MINOR 10
218	\| #define VERSION_MICRO 5
219	\| /* end confdefs.h. */
220	\| #include <ac_nonexistent.h>
221	configure:5158: checking how to print strings
222	configure:5185: result: printf
223	configure:5206: checking for a sed that does not truncate output
224	configure:5270: result: /opt/local/bin/gsed
225	configure:5288: checking for grep that handles long lines and -e
226	configure:5346: result: /usr/bin/grep
227	configure:5351: checking for egrep
228	configure:5413: result: /usr/bin/grep -E
229	configure:5418: checking for fgrep
230	configure:5480: result: /usr/bin/grep -F
231	configure:5515: checking for ld used by /usr/bin/gcc-4.2
232	configure:5582: result: /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
233	configure:5589: checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld
234	configure:5604: result: no
235	configure:5616: checking for BSD- or MS-compatible name lister (nm)
236	configure:5665: result: /usr/bin/nm
237	configure:5795: checking the name lister (/usr/bin/nm) interface
238	configure:5802: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
239	configure:5805: /usr/bin/nm "conftest.o"
240	configure:5808: output
241	0000000000000000 D _some_variable
242	configure:5815: result: BSD nm
243	configure:5818: checking whether ln -s works
244	configure:5822: result: yes
245	configure:5830: checking the maximum length of command line arguments
246	configure:5960: result: 196608
247	configure:5977: checking whether the shell understands some XSI constructs
248	configure:5987: result: yes
249	configure:5991: checking whether the shell understands "+="
250	configure:5997: result: yes
251	configure:6032: checking how to convert x86_64-apple-darwin10.8.0 file names to x86_64-apple-darwin10.8.0 format
252	configure:6072: result: func_convert_file_noop
253	configure:6079: checking how to convert x86_64-apple-darwin10.8.0 file names to toolchain format
254	configure:6099: result: func_convert_file_noop
255	configure:6106: checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files
256	configure:6113: result: -r
257	configure:6187: checking for objdump
258	configure:6217: result: no
259	configure:6246: checking how to recognize dependent libraries
260	configure:6448: result: pass_all
261	configure:6533: checking for dlltool
262	configure:6563: result: no
263	configure:6593: checking how to associate runtime and link libraries
264	configure:6620: result: printf %s\n
265	configure:6681: checking for ar
266	configure:6697: found /usr/bin/ar
267	configure:6708: result: ar
268	configure:6745: checking for archiver @FILE support
269	configure:6762: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
270	configure:6762: $? = 0
271	configure:6765: ar cru libconftest.a @conftest.lst >&5
272	ar: @conftest.lst: No such file or directory
273	configure:6768: $? = 1
274	configure:6788: result: no
275	configure:6846: checking for strip
276	configure:6862: found /usr/bin/strip
277	configure:6873: result: strip
278	configure:6945: checking for ranlib
279	configure:6961: found /usr/bin/ranlib
280	configure:6972: result: ranlib
281	configure:7074: checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object
282	configure:7194: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
283	configure:7197: $? = 0
284	configure:7201: /usr/bin/nm conftest.o \\| sed -n -e 's/^.[ ]$[BCDEGRST][BCDEGRST]$[ ][ ]$[_A-Za-z][_A-Za-z0-9]$$/\1 \2 \2/p' \| sed '/ __gnu_lto/d' \> conftest.nm
285	configure:7204: $? = 0
286	cannot find nm_test_var in conftest.nm
287	configure:7194: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
288	configure:7197: $? = 0
289	configure:7201: /usr/bin/nm conftest.o \\| sed -n -e 's/^.[ ]$[BCDEGRST][BCDEGRST]$[ ][ ]_$[_A-Za-z][_A-Za-z0-9]$$/\1 _\2 \2/p' \| sed '/ __gnu_lto/d' \> conftest.nm
290	configure:7204: $? = 0
291	configure:7270: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c conftstm.o >&5
292	configure:7273: $? = 0
293	configure:7311: result: ok
294	configure:7348: checking for sysroot
295	configure:7378: result: no
296	configure:7634: checking for mt
297	configure:7664: result: no
298	configure:7684: checking if : is a manifest tool
299	configure:7690: : '-?'
300	configure:7698: result: no
301	configure:7754: checking for dsymutil
302	configure:7770: found /usr/bin/dsymutil
303	configure:7781: result: dsymutil
304	configure:7846: checking for nmedit
305	configure:7862: found /usr/bin/nmedit
306	configure:7873: result: nmedit
307	configure:7938: checking for lipo
308	configure:7954: found /usr/bin/lipo
309	configure:7965: result: lipo
310	configure:8030: checking for otool
311	configure:8046: found /usr/bin/otool
312	configure:8057: result: otool
313	configure:8122: checking for otool64
314	configure:8152: result: no
315	configure:8197: checking for -single_module linker flag
316	/usr/bin/gcc-4.2 -pipe -Os -arch x86_64 -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 -o libconftest.dylib -dynamiclib -Wl,-single_module conftest.c
317	configure:8230: result: yes
318	configure:8233: checking for -exported_symbols_list linker flag
319	configure:8253: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 -Wl,-exported_symbols_list,conftest.sym conftest.c >&5
320	configure:8253: $? = 0
321	configure:8263: result: yes
322	configure:8266: checking for -force_load linker flag
323	/usr/bin/gcc-4.2 -pipe -Os -arch x86_64 -c -o conftest.o conftest.c
324	ar cru libconftest.a conftest.o
325	ranlib libconftest.a
326	/usr/bin/gcc-4.2 -pipe -Os -arch x86_64 -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 -o conftest conftest.c -Wl,-force_load,./libconftest.a
327	configure:8298: result: yes
328	configure:8336: checking for ANSI C header files
329	configure:8356: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
330	configure:8356: $? = 0
331	configure:8429: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c >&5
332	configure:8429: $? = 0
333	configure:8429: ./conftest
334	configure:8429: $? = 0
335	configure:8440: result: yes
336	configure:8453: checking for sys/types.h
337	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
338	configure:8453: $? = 0
339	configure:8453: result: yes
340	configure:8453: checking for sys/stat.h
341	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
342	configure:8453: $? = 0
343	configure:8453: result: yes
344	configure:8453: checking for stdlib.h
345	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
346	configure:8453: $? = 0
347	configure:8453: result: yes
348	configure:8453: checking for string.h
349	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
350	configure:8453: $? = 0
351	configure:8453: result: yes
352	configure:8453: checking for memory.h
353	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
354	configure:8453: $? = 0
355	configure:8453: result: yes
356	configure:8453: checking for strings.h
357	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
358	configure:8453: $? = 0
359	configure:8453: result: yes
360	configure:8453: checking for inttypes.h
361	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
362	configure:8453: $? = 0
363	configure:8453: result: yes
364	configure:8453: checking for stdint.h
365	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
366	configure:8453: $? = 0
367	configure:8453: result: yes
368	configure:8453: checking for unistd.h
369	configure:8453: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
370	configure:8453: $? = 0
371	configure:8453: result: yes
372	configure:8467: checking for dlfcn.h
373	configure:8467: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
374	configure:8467: $? = 0
375	configure:8467: result: yes
376	configure:8652: checking for objdir
377	configure:8667: result: .libs
378	configure:8934: checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions
379	configure:8952: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include -fno-rtti -fno-exceptions conftest.c >&5
380	cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
381	configure:8956: $? = 0
382	configure:8969: result: no
383	configure:9296: checking for /usr/bin/gcc-4.2 option to produce PIC
384	configure:9303: result: -fno-common -DPIC
385	configure:9311: checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC works
386	configure:9329: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include -fno-common -DPIC -DPIC conftest.c >&5
387	configure:9333: $? = 0
388	configure:9346: result: yes
389	configure:9375: checking if /usr/bin/gcc-4.2 static flag -static works
390	configure:9403: result: no
391	configure:9418: checking if /usr/bin/gcc-4.2 supports -c -o file.o
392	configure:9439: /usr/bin/gcc-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include -o out/conftest2.o conftest.c >&5
393	configure:9443: $? = 0
394	configure:9465: result: yes
395	configure:9473: checking if /usr/bin/gcc-4.2 supports -c -o file.o
396	configure:9520: result: yes
397	configure:9553: checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries
398	configure:10710: result: yes
399	configure:10950: checking dynamic linker characteristics
400	configure:11695: result: darwin10.8.0 dyld
401	configure:11802: checking how to hardcode library paths into programs
402	configure:11827: result: immediate
403	configure:11872: checking for dlopen in -ldl
404	configure:11897: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c -ldl >&5
405	configure:11897: $? = 0
406	configure:11906: result: yes
407	configure:12121: checking whether a program can dlopen itself
408	configure:12201: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -DHAVE_DLFCN_H -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c -ldl >&5
409	configure:12204: $? = 0
410	configure:12222: result: yes
411	configure:12227: checking whether a statically linked program can dlopen itself
412	configure:12307: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -DHAVE_DLFCN_H -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c -ldl >&5
413	configure:12310: $? = 0
414	configure:12328: result: yes
415	configure:12367: checking whether stripping libraries is possible
416	configure:12381: result: yes
417	configure:12407: checking if libtool supports shared libraries
418	configure:12409: result: yes
419	configure:12412: checking whether to build shared libraries
420	configure:12433: result: yes
421	configure:12436: checking whether to build static libraries
422	configure:12440: result: no
423	configure:12463: checking how to run the C++ preprocessor
424	configure:12490: /usr/bin/g++-4.2 -E -I/opt/local/include conftest.cpp
425	configure:12490: $? = 0
426	configure:12504: /usr/bin/g++-4.2 -E -I/opt/local/include conftest.cpp
427	conftest.cpp:26:28: error: ac_nonexistent.h: No such file or directory
428	configure:12504: $? = 1
429	configure: failed program was:
430	\| /* confdefs.h */
431	\| #define PACKAGE_NAME "wireshark"
432	\| #define PACKAGE_TARNAME "wireshark"
433	\| #define PACKAGE_VERSION "1.10.5"
434	\| #define PACKAGE_STRING "wireshark 1.10.5"
435	\| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/"
436	\| #define PACKAGE_URL "http://www.wireshark.org/"
437	\| #define PACKAGE "wireshark"
438	\| #define VERSION "1.10.5"
439	\| #define VERSION_MAJOR 1
440	\| #define VERSION_MINOR 10
441	\| #define VERSION_MICRO 5
442	\| #define STDC_HEADERS 1
443	\| #define HAVE_SYS_TYPES_H 1
444	\| #define HAVE_SYS_STAT_H 1
445	\| #define HAVE_STDLIB_H 1
446	\| #define HAVE_STRING_H 1
447	\| #define HAVE_MEMORY_H 1
448	\| #define HAVE_STRINGS_H 1
449	\| #define HAVE_INTTYPES_H 1
450	\| #define HAVE_STDINT_H 1
451	\| #define HAVE_UNISTD_H 1
452	\| #define HAVE_DLFCN_H 1
453	\| #define LT_OBJDIR ".libs/"
454	\| /* end confdefs.h. */
455	\| #include <ac_nonexistent.h>
456	configure:12529: result: /usr/bin/g++-4.2 -E
457	configure:12549: /usr/bin/g++-4.2 -E -I/opt/local/include conftest.cpp
458	configure:12549: $? = 0
459	configure:12563: /usr/bin/g++-4.2 -E -I/opt/local/include conftest.cpp
460	conftest.cpp:26:28: error: ac_nonexistent.h: No such file or directory
461	configure:12563: $? = 1
462	configure: failed program was:
463	\| /* confdefs.h */
464	\| #define PACKAGE_NAME "wireshark"
465	\| #define PACKAGE_TARNAME "wireshark"
466	\| #define PACKAGE_VERSION "1.10.5"
467	\| #define PACKAGE_STRING "wireshark 1.10.5"
468	\| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/"
469	\| #define PACKAGE_URL "http://www.wireshark.org/"
470	\| #define PACKAGE "wireshark"
471	\| #define VERSION "1.10.5"
472	\| #define VERSION_MAJOR 1
473	\| #define VERSION_MINOR 10
474	\| #define VERSION_MICRO 5
475	\| #define STDC_HEADERS 1
476	\| #define HAVE_SYS_TYPES_H 1
477	\| #define HAVE_SYS_STAT_H 1
478	\| #define HAVE_STDLIB_H 1
479	\| #define HAVE_STRING_H 1
480	\| #define HAVE_MEMORY_H 1
481	\| #define HAVE_STRINGS_H 1
482	\| #define HAVE_INTTYPES_H 1
483	\| #define HAVE_STDINT_H 1
484	\| #define HAVE_UNISTD_H 1
485	\| #define HAVE_DLFCN_H 1
486	\| #define LT_OBJDIR ".libs/"
487	\| /* end confdefs.h. */
488	\| #include <ac_nonexistent.h>
489	configure:12732: checking for ld used by /usr/bin/g++-4.2
490	configure:12799: result: /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
491	configure:12806: checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld
492	configure:12821: result: no
493	configure:12876: checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries
494	configure:13881: result: yes
495	configure:13917: /usr/bin/g++-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.cpp >&5
496	configure:13920: $? = 0
497	configure:14440: checking for /usr/bin/g++-4.2 option to produce PIC
498	configure:14447: result: -fno-common -DPIC
499	configure:14455: checking if /usr/bin/g++-4.2 PIC flag -fno-common -DPIC works
500	configure:14473: /usr/bin/g++-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include -fno-common -DPIC -DPIC conftest.cpp >&5
501	configure:14477: $? = 0
502	configure:14490: result: yes
503	configure:14513: checking if /usr/bin/g++-4.2 static flag -static works
504	configure:14541: result: no
505	configure:14553: checking if /usr/bin/g++-4.2 supports -c -o file.o
506	configure:14574: /usr/bin/g++-4.2 -c -pipe -Os -arch x86_64 -I/opt/local/include -o out/conftest2.o conftest.cpp >&5
507	configure:14578: $? = 0
508	configure:14600: result: yes
509	configure:14605: checking if /usr/bin/g++-4.2 supports -c -o file.o
510	configure:14652: result: yes
511	configure:14682: checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries
512	configure:14721: result: yes
513	configure:14862: checking dynamic linker characteristics
514	configure:15541: result: darwin10.8.0 dyld
515	configure:15594: checking how to hardcode library paths into programs
516	configure:15619: result: immediate
517	configure:15682: checking for perl
518	configure:15700: found /opt/local/bin/perl
519	configure:15712: result: /opt/local/bin/perl
520	configure:15724: checking for python
521	configure:15742: found /usr/bin/python
522	configure:15754: result: /usr/bin/python
523	configure:15769: checking whether /usr/bin/python is Python 2.5 or later
524	configure:15779: result: yes
525	configure:15807: checking for bison
526	configure:15823: found /opt/local/bin/bison
527	configure:15834: result: bison -y
528	configure:15848: checking for bison
529	configure:15866: found /opt/local/bin/bison
530	configure:15878: result: /opt/local/bin/bison
531	configure:15894: checking for flex
532	configure:15910: found /usr/bin/flex
533	configure:15921: result: flex
534	configure:15958: flex conftest.l
535	configure:15962: $? = 0
536	configure:15964: checking lex output file root
537	configure:15978: result: lex.yy
538	configure:15983: checking lex library
539	configure:15997: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c >&5
540	Undefined symbols for architecture x86_64:
541	"_yywrap", referenced from:
542	_input in ccwQEvec.o
543	_yylex in ccwQEvec.o
544	_main in ccwQEvec.o
545	ld: symbol(s) not found for architecture x86_64
546	collect2: ld returned 1 exit status
547	configure:15997: $? = 1
548	configure: failed program was:
549	\| /* confdefs.h */
550	\| #define PACKAGE_NAME "wireshark"
551	\| #define PACKAGE_TARNAME "wireshark"
552	\| #define PACKAGE_VERSION "1.10.5"
553	\| #define PACKAGE_STRING "wireshark 1.10.5"
554	\| #define PACKAGE_BUGREPORT "http://bugs.wireshark.org/"
555	\| #define PACKAGE_URL "http://www.wireshark.org/"
556	\| #define PACKAGE "wireshark"
557	\| #define VERSION "1.10.5"
558	\| #define VERSION_MAJOR 1
559	\| #define VERSION_MINOR 10
560	\| #define VERSION_MICRO 5
561	\| #define STDC_HEADERS 1
562	\| #define HAVE_SYS_TYPES_H 1
563	\| #define HAVE_SYS_STAT_H 1
564	\| #define HAVE_STDLIB_H 1
565	\| #define HAVE_STRING_H 1
566	\| #define HAVE_MEMORY_H 1
567	\| #define HAVE_STRINGS_H 1
568	\| #define HAVE_INTTYPES_H 1
569	\| #define HAVE_STDINT_H 1
570	\| #define HAVE_UNISTD_H 1
571	\| #define HAVE_DLFCN_H 1
572	\| #define LT_OBJDIR ".libs/"
573	\| /* end confdefs.h. */
574	\|
575	\| #line 3 "lex.yy.c"
576	\|
577	\| #define YY_INT_ALIGNED short int
578	\|
579	\| /* A lexical scanner generated by flex */
580	\|
581	\| #define FLEX_SCANNER
582	\| #define YY_FLEX_MAJOR_VERSION 2
583	\| #define YY_FLEX_MINOR_VERSION 5
584	\| #define YY_FLEX_SUBMINOR_VERSION 35
585	\| #if YY_FLEX_SUBMINOR_VERSION > 0
586	\| #define FLEX_BETA
587	\| #endif
588	\|
589	\| /* First, we deal with platform-specific or compiler-specific issues. */
590	\|
591	\| /* begin standard C headers. */
592	\| #include <stdio.h>
593	\| #include <string.h>
594	\| #include <errno.h>
595	\| #include <stdlib.h>
596	\|
597	\| /* end standard C headers. */
598	\|
599	\| /* flex integer type definitions */
600	\|
601	\| #ifndef FLEXINT_H
602	\| #define FLEXINT_H
603	\|
604	\| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
605	\|
606	\| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
607	\|
608	\| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
609	\| * if you want the limit (max/min) macros for int types.
610	\| */
611	\| #ifndef __STDC_LIMIT_MACROS
612	\| #define __STDC_LIMIT_MACROS 1
613	\| #endif
614	\|
615	\| #include <inttypes.h>
616	\| typedef int8_t flex_int8_t;
617	\| typedef uint8_t flex_uint8_t;
618	\| typedef int16_t flex_int16_t;
619	\| typedef uint16_t flex_uint16_t;
620	\| typedef int32_t flex_int32_t;
621	\| typedef uint32_t flex_uint32_t;
622	\| #else
623	\| typedef signed char flex_int8_t;
624	\| typedef short int flex_int16_t;
625	\| typedef int flex_int32_t;
626	\| typedef unsigned char flex_uint8_t;
627	\| typedef unsigned short int flex_uint16_t;
628	\| typedef unsigned int flex_uint32_t;
629	\| #endif /* ! C99 */
630	\|
631	\| /* Limits of integral types. */
632	\| #ifndef INT8_MIN
633	\| #define INT8_MIN (-128)
634	\| #endif
635	\| #ifndef INT16_MIN
636	\| #define INT16_MIN (-32767-1)
637	\| #endif
638	\| #ifndef INT32_MIN
639	\| #define INT32_MIN (-2147483647-1)
640	\| #endif
641	\| #ifndef INT8_MAX
642	\| #define INT8_MAX (127)
643	\| #endif
644	\| #ifndef INT16_MAX
645	\| #define INT16_MAX (32767)
646	\| #endif
647	\| #ifndef INT32_MAX
648	\| #define INT32_MAX (2147483647)
649	\| #endif
650	\| #ifndef UINT8_MAX
651	\| #define UINT8_MAX (255U)
652	\| #endif
653	\| #ifndef UINT16_MAX
654	\| #define UINT16_MAX (65535U)
655	\| #endif
656	\| #ifndef UINT32_MAX
657	\| #define UINT32_MAX (4294967295U)
658	\| #endif
659	\|
660	\| #endif /* ! FLEXINT_H */
661	\|
662	\| #ifdef __cplusplus
663	\|
664	\| /* The "const" storage-class-modifier is valid. */
665	\| #define YY_USE_CONST
666	\|
667	\| #else /* ! __cplusplus */
668	\|
669	\| /* C99 requires __STDC__ to be defined as 1. */
670	\| #if defined (__STDC__)
671	\|
672	\| #define YY_USE_CONST
673	\|
674	\| #endif /* defined (__STDC__) */
675	\| #endif /* ! __cplusplus */
676	\|
677	\| #ifdef YY_USE_CONST
678	\| #define yyconst const
679	\| #else
680	\| #define yyconst
681	\| #endif
682	\|
683	\| /* Returned upon end-of-file. */
684	\| #define YY_NULL 0
685	\|
686	\| /* Promotes a possibly negative, possibly signed char to an unsigned
687	\| * integer for use as an array index. If the signed char is negative,
688	\| * we want to instead treat it as an 8-bit unsigned char, hence the
689	\| * double cast.
690	\| */
691	\| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
692	\|
693	\| /* Enter a start condition. This macro really ought to take a parameter,
694	\| * but we do it the disgusting crufty way forced on us by the ()-less
695	\| * definition of BEGIN.
696	\| */
697	\| #define BEGIN (yy_start) = 1 + 2 *
698	\|
699	\| /* Translate the current start state into a value that can be later handed
700	\| * to BEGIN to return to the state. The YYSTATE alias is for lex
701	\| * compatibility.
702	\| */
703	\| #define YY_START (((yy_start) - 1) / 2)
704	\| #define YYSTATE YY_START
705	\|
706	\| /* Action number for EOF rule of a given start state. */
707	\| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
708	\|
709	\| /* Special action meaning "start processing a new file". */
710	\| #define YY_NEW_FILE yyrestart(yyin )
711	\|
712	\| #define YY_END_OF_BUFFER_CHAR 0
713	\|
714	\| /* Size of default input buffer. */
715	\| #ifndef YY_BUF_SIZE
716	\| #define YY_BUF_SIZE 16384
717	\| #endif
718	\|
719	\| /* The state buf must be large enough to hold one state per character in the main buffer.
720	\| */
721	\| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
722	\|
723	\| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
724	\| #define YY_TYPEDEF_YY_BUFFER_STATE
725	\| typedef struct yy_buffer_state *YY_BUFFER_STATE;
726	\| #endif
727	\|
728	\| #ifndef YY_TYPEDEF_YY_SIZE_T
729	\| #define YY_TYPEDEF_YY_SIZE_T
730	\| typedef size_t yy_size_t;
731	\| #endif
732	\|
733	\| extern yy_size_t yyleng;
734	\|
735	\| extern FILE yyin, yyout;
736	\|
737	\| #define EOB_ACT_CONTINUE_SCAN 0
738	\| #define EOB_ACT_END_OF_FILE 1
739	\| #define EOB_ACT_LAST_MATCH 2
740	\|
741	\| #define YY_LESS_LINENO(n)
742	\|
743	\| /* Return all but the first "n" matched characters back to the input stream. */
744	\| #define yyless(n) \
745	\| do \
746	\| { \
747	\| /* Undo effects of setting up yytext. */ \
748	\| int yyless_macro_arg = (n); \
749	\| YY_LESS_LINENO(yyless_macro_arg);\
750	\| *yy_cp = (yy_hold_char); \
751	\| YY_RESTORE_YY_MORE_OFFSET \
752	\| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
753	\| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
754	\| } \
755	\| while ( 0 )
756	\|
757	\| #define unput(c) yyunput( c, (yytext_ptr) )
758	\|
759	\| #ifndef YY_STRUCT_YY_BUFFER_STATE
760	\| #define YY_STRUCT_YY_BUFFER_STATE
761	\| struct yy_buffer_state
762	\| {
763	\| FILE *yy_input_file;
764	\|
765	\| char yy_ch_buf; / input buffer */
766	\| char yy_buf_pos; / current position in input buffer */
767	\|
768	\| /* Size of input buffer in bytes, not including room for EOB
769	\| * characters.
770	\| */
771	\| yy_size_t yy_buf_size;
772	\|
773	\| /* Number of characters read into yy_ch_buf, not including EOB
774	\| * characters.
775	\| */
776	\| yy_size_t yy_n_chars;
777	\|
778	\| /* Whether we "own" the buffer - i.e., we know we created it,
779	\| * and can realloc() it to grow it, and should free() it to
780	\| * delete it.
781	\| */
782	\| int yy_is_our_buffer;
783	\|
784	\| /* Whether this is an "interactive" input source; if so, and
785	\| * if we're using stdio for input, then we want to use getc()
786	\| * instead of fread(), to make sure we stop fetching input after
787	\| * each newline.
788	\| */
789	\| int yy_is_interactive;
790	\|
791	\| /* Whether we're considered to be at the beginning of a line.
792	\| * If so, '^' rules will be active on the next match, otherwise
793	\| * not.
794	\| */
795	\| int yy_at_bol;
796	\|
797	\| int yy_bs_lineno; /*< The line count. /
798	\| int yy_bs_column; /*< The column count. /
799	\|
800	\| /* Whether to try to fill the input buffer when we reach the
801	\| * end of it.
802	\| */
803	\| int yy_fill_buffer;
804	\|
805	\| int yy_buffer_status;
806	\|
807	\| #define YY_BUFFER_NEW 0
808	\| #define YY_BUFFER_NORMAL 1
809	\| /* When an EOF's been seen but there's still some text to process
810	\| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
811	\| * shouldn't try reading from the input source any more. We might
812	\| * still have a bunch of tokens to match, though, because of
813	\| * possible backing-up.
814	\| *
815	\| * When we actually see the EOF, we change the status to "new"
816	\| * (via yyrestart()), so that the user can continue scanning by
817	\| * just pointing yyin at a new input file.
818	\| */
819	\| #define YY_BUFFER_EOF_PENDING 2
820	\|
821	\| };
822	\| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
823	\|
824	\| /* Stack of input buffers. */
825	\| static size_t yy_buffer_stack_top = 0; /*< index of top of stack. /
826	\| static size_t yy_buffer_stack_max = 0; /*< capacity of stack. /
827	\| static YY_BUFFER_STATE * yy_buffer_stack = 0; /*< Stack as an array. /
828	\|
829	\| /* We provide macros for accessing buffer states in case in the
830	\| * future we want to put the buffer states in a more general
831	\| * "scanner state".
832	\| *
833	\| * Returns the top of the stack, or NULL.
834	\| */
835	\| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
836	\| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
837	\| : NULL)
838	\|
839	\| /* Same as previous macro, but useful when we know that the buffer stack is not
840	\| * NULL or when we need an lvalue. For internal use only.
841	\| */
842	\| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
843	\|
844	\| /* yy_hold_char holds the character lost when yytext is formed. */
845	\| static char yy_hold_char;
846	\| static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */
847	\| yy_size_t yyleng;
848	\|
849	\| /* Points to current character in buffer. */
850	\| static char yy_c_buf_p = (char ) 0;
851	\| static int yy_init = 0; /* whether we need to initialize */
852	\| static int yy_start = 0; /* start state number */
853	\|
854	\| /* Flag which is used to allow yywrap()'s to do buffer switches
855	\| * instead of setting up a fresh yyin. A bit of a hack ...
856	\| */
857	\| static int yy_did_buffer_switch_on_eof;
858	\|
859	\| void yyrestart (FILE *input_file );
860	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
861	\| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
862	\| void yy_delete_buffer (YY_BUFFER_STATE b );
863	\| void yy_flush_buffer (YY_BUFFER_STATE b );
864	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
865	\| void yypop_buffer_state (void );
866	\|
867	\| static void yyensure_buffer_stack (void );
868	\| static void yy_load_buffer_state (void );
869	\| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
870	\|
871	\| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
872	\|
873	\| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
874	\| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
875	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len );
876	\|
877	\| void *yyalloc (yy_size_t );
878	\| void yyrealloc (void ,yy_size_t );
879	\| void yyfree (void * );
880	\|
881	\| #define yy_new_buffer yy_create_buffer
882	\|
883	\| #define yy_set_interactive(is_interactive) \
884	\| { \
885	\| if ( ! YY_CURRENT_BUFFER ){ \
886	\| yyensure_buffer_stack (); \
887	\| YY_CURRENT_BUFFER_LVALUE = \
888	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
889	\| } \
890	\| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
891	\| }
892	\|
893	\| #define yy_set_bol(at_bol) \
894	\| { \
895	\| if ( ! YY_CURRENT_BUFFER ){\
896	\| yyensure_buffer_stack (); \
897	\| YY_CURRENT_BUFFER_LVALUE = \
898	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
899	\| } \
900	\| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
901	\| }
902	\|
903	\| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
904	\|
905	\| /* Begin user sect3 */
906	\|
907	\| typedef unsigned char YY_CHAR;
908	\|
909	\| FILE yyin = (FILE ) 0, yyout = (FILE ) 0;
910	\|
911	\| typedef int yy_state_type;
912	\|
913	\| extern int yylineno;
914	\|
915	\| int yylineno = 1;
916	\|
917	\| extern char *yytext;
918	\| #define yytext_ptr yytext
919	\|
920	\| static yy_state_type yy_get_previous_state (void );
921	\| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
922	\| static int yy_get_next_buffer (void );
923	\| static void yy_fatal_error (yyconst char msg[] );
924	\|
925	\| /* Done after the current pattern has been matched and before the
926	\| * corresponding action - sets up yytext.
927	\| */
928	\| #define YY_DO_BEFORE_ACTION \
929	\| (yytext_ptr) = yy_bp; \
930	\| (yytext_ptr) -= (yy_more_len); \
931	\| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
932	\| (yy_hold_char) = *yy_cp; \
933	\| *yy_cp = '\0'; \
934	\| (yy_c_buf_p) = yy_cp;
935	\|
936	\| #define YY_NUM_RULES 8
937	\| #define YY_END_OF_BUFFER 9
938	\| /* This struct is not used in this scanner,
939	\| but its presence is necessary. */
940	\| struct yy_trans_info
941	\| {
942	\| flex_int32_t yy_verify;
943	\| flex_int32_t yy_nxt;
944	\| };
945	\| static yyconst flex_int16_t yy_acclist[23] =
946	\| { 0,
947	\| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
948	\| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
949	\| 7, 8
950	\| } ;
951	\|
952	\| static yyconst flex_int16_t yy_accept[14] =
953	\| { 0,
954	\| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
955	\| 20, 23, 23
956	\| } ;
957	\|
958	\| static yyconst flex_int32_t yy_ec[256] =
959	\| { 0,
960	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
961	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
962	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
963	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
964	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
965	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
966	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
967	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
968	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
969	\| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
970	\|
971	\| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
972	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
973	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
974	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
975	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
976	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
977	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
978	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
979	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
980	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
981	\|
982	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
983	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
984	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
985	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
986	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
987	\| 1, 1, 1, 1, 1
988	\| } ;
989	\|
990	\| static yyconst flex_int32_t yy_meta[9] =
991	\| { 0,
992	\| 1, 1, 1, 1, 1, 1, 1, 1
993	\| } ;
994	\|
995	\| static yyconst flex_int16_t yy_base[13] =
996	\| { 0,
997	\| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
998	\| 10, 10
999	\| } ;
1000	\|
1001	\| static yyconst flex_int16_t yy_def[13] =
1002	\| { 0,
1003	\| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
1004	\| 12, 0
1005	\| } ;
1006	\|
1007	\| static yyconst flex_int16_t yy_nxt[19] =
1008	\| { 0,
1009	\| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
1010	\| 12, 12, 12, 12, 12, 12, 12, 12
1011	\| } ;
1012	\|
1013	\| static yyconst flex_int16_t yy_chk[19] =
1014	\| { 0,
1015	\| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
1016	\| 12, 12, 12, 12, 12, 12, 12, 12
1017	\| } ;
1018	\|
1019	\| extern int yy_flex_debug;
1020	\| int yy_flex_debug = 0;
1021	\|
1022	\| static yy_state_type yy_state_buf=0, yy_state_ptr=0;
1023	\| static char *yy_full_match;
1024	\| static int yy_lp;
1025	\| #define REJECT \
1026	\| { \
1027	\| yy_cp = (yy_hold_char); / undo effects of setting up yytext */ \
1028	\| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
1029	\| ++(yy_lp); \
1030	\| goto find_rule; \
1031	\| }
1032	\|
1033	\| static int yy_more_flag = 0;
1034	\| static int yy_more_len = 0;
1035	\| #define yymore() ((yy_more_flag) = 1)
1036	\| #define YY_MORE_ADJ (yy_more_len)
1037	\| #define YY_RESTORE_YY_MORE_OFFSET
1038	\| char *yytext;
1039	\| #line 1 "conftest.l"
1040	\| #line 468 "lex.yy.c"
1041	\|
1042	\| #define INITIAL 0
1043	\|
1044	\| #ifndef YY_NO_UNISTD_H
1045	\| /* Special case for "unistd.h", since it is non-ANSI. We include it way
1046	\| * down here because we want the user's section 1 to have been scanned first.
1047	\| * The user has a chance to override it with an option.
1048	\| */
1049	\| #include <unistd.h>
1050	\| #endif
1051	\|
1052	\| #ifndef YY_EXTRA_TYPE
1053	\| #define YY_EXTRA_TYPE void *
1054	\| #endif
1055	\|
1056	\| static int yy_init_globals (void );
1057	\|
1058	\| /* Accessor methods to globals.
1059	\| These are made visible to non-reentrant scanners for convenience. */
1060	\|
1061	\| int yylex_destroy (void );
1062	\|
1063	\| int yyget_debug (void );
1064	\|
1065	\| void yyset_debug (int debug_flag );
1066	\|
1067	\| YY_EXTRA_TYPE yyget_extra (void );
1068	\|
1069	\| void yyset_extra (YY_EXTRA_TYPE user_defined );
1070	\|
1071	\| FILE *yyget_in (void );
1072	\|
1073	\| void yyset_in (FILE * in_str );
1074	\|
1075	\| FILE *yyget_out (void );
1076	\|
1077	\| void yyset_out (FILE * out_str );
1078	\|
1079	\| yy_size_t yyget_leng (void );
1080	\|
1081	\| char *yyget_text (void );
1082	\|
1083	\| int yyget_lineno (void );
1084	\|
1085	\| void yyset_lineno (int line_number );
1086	\|
1087	\| /* Macros after this point can all be overridden by user definitions in
1088	\| * section 1.
1089	\| */
1090	\|
1091	\| #ifndef YY_SKIP_YYWRAP
1092	\| #ifdef __cplusplus
1093	\| extern "C" int yywrap (void );
1094	\| #else
1095	\| extern int yywrap (void );
1096	\| #endif
1097	\| #endif
1098	\|
1099	\| static void yyunput (int c,char *buf_ptr );
1100	\|
1101	\| #ifndef yytext_ptr
1102	\| static void yy_flex_strncpy (char ,yyconst char ,int );
1103	\| #endif
1104	\|
1105	\| #ifdef YY_NEED_STRLEN
1106	\| static int yy_flex_strlen (yyconst char * );
1107	\| #endif
1108	\|
1109	\| #ifndef YY_NO_INPUT
1110	\|
1111	\| #ifdef __cplusplus
1112	\| static int yyinput (void );
1113	\| #else
1114	\| static int input (void );
1115	\| #endif
1116	\|
1117	\| #endif
1118	\|
1119	\| /* Amount of stuff to slurp up with each read. */
1120	\| #ifndef YY_READ_BUF_SIZE
1121	\| #define YY_READ_BUF_SIZE 8192
1122	\| #endif
1123	\|
1124	\| /* Copy whatever the last rule matched to the standard output. */
1125	\| #ifndef ECHO
1126	\| /* This used to be an fputs(), but since the string might contain NUL's,
1127	\| * we now use fwrite().
1128	\| */
1129	\| #define ECHO fwrite( yytext, yyleng, 1, yyout )
1130	\| #endif
1131	\|
1132	\| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
1133	\| * is returned in "result".
1134	\| */
1135	\| #ifndef YY_INPUT
1136	\| #define YY_INPUT(buf,result,max_size) \
1137	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
1138	\| { \
1139	\| int c = '*'; \
1140	\| yy_size_t n; \
1141	\| for ( n = 0; n < max_size && \
1142	\| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
1143	\| buf[n] = (char) c; \
1144	\| if ( c == '\n' ) \
1145	\| buf[n++] = (char) c; \
1146	\| if ( c == EOF && ferror( yyin ) ) \
1147	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
1148	\| result = n; \
1149	\| } \
1150	\| else \
1151	\| { \
1152	\| errno=0; \
1153	\| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
1154	\| { \
1155	\| if( errno != EINTR) \
1156	\| { \
1157	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
1158	\| break; \
1159	\| } \
1160	\| errno=0; \
1161	\| clearerr(yyin); \
1162	\| } \
1163	\| }\
1164	\| \
1165	\|
1166	\| #endif
1167	\|
1168	\| /* No semi-colon after return; correct usage is to write "yyterminate();" -
1169	\| * we don't want an extra ';' after the "return" because that will cause
1170	\| * some compilers to complain about unreachable statements.
1171	\| */
1172	\| #ifndef yyterminate
1173	\| #define yyterminate() return YY_NULL
1174	\| #endif
1175	\|
1176	\| /* Number of entries by which start-condition stack grows. */
1177	\| #ifndef YY_START_STACK_INCR
1178	\| #define YY_START_STACK_INCR 25
1179	\| #endif
1180	\|
1181	\| /* Report a fatal error. */
1182	\| #ifndef YY_FATAL_ERROR
1183	\| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
1184	\| #endif
1185	\|
1186	\| /* end tables serialization structures and prototypes */
1187	\|
1188	\| /* Default declaration of generated scanner - a define so the user can
1189	\| * easily add parameters.
1190	\| */
1191	\| #ifndef YY_DECL
1192	\| #define YY_DECL_IS_OURS 1
1193	\|
1194	\| extern int yylex (void);
1195	\|
1196	\| #define YY_DECL int yylex (void)
1197	\| #endif /* !YY_DECL */
1198	\|
1199	\| /* Code executed at the beginning of each rule, after yytext and yyleng
1200	\| * have been set up.
1201	\| */
1202	\| #ifndef YY_USER_ACTION
1203	\| #define YY_USER_ACTION
1204	\| #endif
1205	\|
1206	\| /* Code executed at the end of each rule. */
1207	\| #ifndef YY_BREAK
1208	\| #define YY_BREAK break;
1209	\| #endif
1210	\|
1211	\| #define YY_RULE_SETUP \
1212	\| YY_USER_ACTION
1213	\|
1214	\| /** The main scanner function which does all the work.
1215	\| */
1216	\| YY_DECL
1217	\| {
1218	\| register yy_state_type yy_current_state;
1219	\| register char yy_cp, yy_bp;
1220	\| register int yy_act;
1221	\|
1222	\| #line 1 "conftest.l"
1223	\|
1224	\| #line 652 "lex.yy.c"
1225	\|
1226	\| if ( !(yy_init) )
1227	\| {
1228	\| (yy_init) = 1;
1229	\|
1230	\| #ifdef YY_USER_INIT
1231	\| YY_USER_INIT;
1232	\| #endif
1233	\|
1234	\| /* Create the reject buffer large enough to save one state per allowed character. */
1235	\| if ( ! (yy_state_buf) )
1236	\| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
1237	\| if ( ! (yy_state_buf) )
1238	\| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
1239	\|
1240	\| if ( ! (yy_start) )
1241	\| (yy_start) = 1; /* first start state */
1242	\|
1243	\| if ( ! yyin )
1244	\| yyin = stdin;
1245	\|
1246	\| if ( ! yyout )
1247	\| yyout = stdout;
1248	\|
1249	\| if ( ! YY_CURRENT_BUFFER ) {
1250	\| yyensure_buffer_stack ();
1251	\| YY_CURRENT_BUFFER_LVALUE =
1252	\| yy_create_buffer(yyin,YY_BUF_SIZE );
1253	\| }
1254	\|
1255	\| yy_load_buffer_state( );
1256	\| }
1257	\|
1258	\| while ( 1 ) /* loops until end-of-file is reached */
1259	\| {
1260	\| (yy_more_len) = 0;
1261	\| if ( (yy_more_flag) )
1262	\| {
1263	\| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
1264	\| (yy_more_flag) = 0;
1265	\| }
1266	\| yy_cp = (yy_c_buf_p);
1267	\|
1268	\| /* Support of yytext. */
1269	\| *yy_cp = (yy_hold_char);
1270	\|
1271	\| /* yy_bp points to the position in yy_ch_buf of the start of
1272	\| * the current run.
1273	\| */
1274	\| yy_bp = yy_cp;
1275	\|
1276	\| yy_current_state = (yy_start);
1277	\|
1278	\| (yy_state_ptr) = (yy_state_buf);
1279	\| *(yy_state_ptr)++ = yy_current_state;
1280	\|
1281	\| yy_match:
1282	\| do
1283	\| {
1284	\| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
1285	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1286	\| {
1287	\| yy_current_state = (int) yy_def[yy_current_state];
1288	\| if ( yy_current_state >= 13 )
1289	\| yy_c = yy_meta[(unsigned int) yy_c];
1290	\| }
1291	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1292	\| *(yy_state_ptr)++ = yy_current_state;
1293	\| ++yy_cp;
1294	\| }
1295	\| while ( yy_base[yy_current_state] != 10 );
1296	\|
1297	\| yy_find_action:
1298	\| yy_current_state = *--(yy_state_ptr);
1299	\| (yy_lp) = yy_accept[yy_current_state];
1300	\| goto find_rule; /* Shut up GCC warning -Wall */
1301	\| find_rule: /* we branch to this label when backing up */
1302	\| for ( ; ; ) /* until we find what rule we matched */
1303	\| {
1304	\| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
1305	\| {
1306	\| yy_act = yy_acclist[(yy_lp)];
1307	\| {
1308	\| (yy_full_match) = yy_cp;
1309	\| break;
1310	\| }
1311	\| }
1312	\| --yy_cp;
1313	\| yy_current_state = *--(yy_state_ptr);
1314	\| (yy_lp) = yy_accept[yy_current_state];
1315	\| }
1316	\|
1317	\| YY_DO_BEFORE_ACTION;
1318	\|
1319	\| do_action: /* This label is used only to access EOF actions. */
1320	\|
1321	\| switch ( yy_act )
1322	\| { /* beginning of action switch */
1323	\| case 1:
1324	\| YY_RULE_SETUP
1325	\| #line 2 "conftest.l"
1326	\| { ECHO; }
1327	\| YY_BREAK
1328	\| case 2:
1329	\| YY_RULE_SETUP
1330	\| #line 3 "conftest.l"
1331	\| { REJECT; }
1332	\| YY_BREAK
1333	\| case 3:
1334	\| YY_RULE_SETUP
1335	\| #line 4 "conftest.l"
1336	\| { yymore (); }
1337	\| YY_BREAK
1338	\| case 4:
1339	\| YY_RULE_SETUP
1340	\| #line 5 "conftest.l"
1341	\| { yyless (1); }
1342	\| YY_BREAK
1343	\| case 5:
1344	\| YY_RULE_SETUP
1345	\| #line 6 "conftest.l"
1346	\| { yyless (input () != 0); }
1347	\| YY_BREAK
1348	\| case 6:
1349	\| YY_RULE_SETUP
1350	\| #line 7 "conftest.l"
1351	\| { unput (yytext[0]); }
1352	\| YY_BREAK
1353	\| case 7:
1354	\| YY_RULE_SETUP
1355	\| #line 8 "conftest.l"
1356	\| { BEGIN INITIAL; }
1357	\| YY_BREAK
1358	\| case 8:
1359	\| YY_RULE_SETUP
1360	\| #line 9 "conftest.l"
1361	\| ECHO;
1362	\| YY_BREAK
1363	\| #line 791 "lex.yy.c"
1364	\| case YY_STATE_EOF(INITIAL):
1365	\| yyterminate();
1366	\|
1367	\| case YY_END_OF_BUFFER:
1368	\| {
1369	\| /* Amount of text matched not including the EOB char. */
1370	\| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
1371	\|
1372	\| /* Undo the effects of YY_DO_BEFORE_ACTION. */
1373	\| *yy_cp = (yy_hold_char);
1374	\| YY_RESTORE_YY_MORE_OFFSET
1375	\|
1376	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
1377	\| {
1378	\| /* We're scanning a new file or input source. It's
1379	\| * possible that this happened because the user
1380	\| * just pointed yyin at a new source and called
1381	\| * yylex(). If so, then we have to assure
1382	\| * consistency between YY_CURRENT_BUFFER and our
1383	\| * globals. Here is the right place to do so, because
1384	\| * this is the first action (other than possibly a
1385	\| * back-up) that will match for the new input source.
1386	\| */
1387	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1388	\| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
1389	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
1390	\| }
1391	\|
1392	\| /* Note that here we test for yy_c_buf_p "<=" to the position
1393	\| * of the first EOB in the buffer, since yy_c_buf_p will
1394	\| * already have been incremented past the NUL character
1395	\| * (since all states make transitions on EOB to the
1396	\| * end-of-buffer state). Contrast this with the test
1397	\| * in input().
1398	\| */
1399	\| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1400	\| { /* This was really a NUL. */
1401	\| yy_state_type yy_next_state;
1402	\|
1403	\| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
1404	\|
1405	\| yy_current_state = yy_get_previous_state( );
1406	\|
1407	\| /* Okay, we're now positioned to make the NUL
1408	\| * transition. We couldn't have
1409	\| * yy_get_previous_state() go ahead and do it
1410	\| * for us because it doesn't know how to deal
1411	\| * with the possibility of jamming (and we don't
1412	\| * want to build jamming into it because then it
1413	\| * will run more slowly).
1414	\| */
1415	\|
1416	\| yy_next_state = yy_try_NUL_trans( yy_current_state );
1417	\|
1418	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1419	\|
1420	\| if ( yy_next_state )
1421	\| {
1422	\| /* Consume the NUL. */
1423	\| yy_cp = ++(yy_c_buf_p);
1424	\| yy_current_state = yy_next_state;
1425	\| goto yy_match;
1426	\| }
1427	\|
1428	\| else
1429	\| {
1430	\| yy_cp = (yy_c_buf_p);
1431	\| goto yy_find_action;
1432	\| }
1433	\| }
1434	\|
1435	\| else switch ( yy_get_next_buffer( ) )
1436	\| {
1437	\| case EOB_ACT_END_OF_FILE:
1438	\| {
1439	\| (yy_did_buffer_switch_on_eof) = 0;
1440	\|
1441	\| if ( yywrap( ) )
1442	\| {
1443	\| /* Note: because we've taken care in
1444	\| * yy_get_next_buffer() to have set up
1445	\| * yytext, we can now set up
1446	\| * yy_c_buf_p so that if some total
1447	\| * hoser (like flex itself) wants to
1448	\| * call the scanner after we return the
1449	\| * YY_NULL, it'll still work - another
1450	\| * YY_NULL will get returned.
1451	\| */
1452	\| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
1453	\|
1454	\| yy_act = YY_STATE_EOF(YY_START);
1455	\| goto do_action;
1456	\| }
1457	\|
1458	\| else
1459	\| {
1460	\| if ( ! (yy_did_buffer_switch_on_eof) )
1461	\| YY_NEW_FILE;
1462	\| }
1463	\| break;
1464	\| }
1465	\|
1466	\| case EOB_ACT_CONTINUE_SCAN:
1467	\| (yy_c_buf_p) =
1468	\| (yytext_ptr) + yy_amount_of_matched_text;
1469	\|
1470	\| yy_current_state = yy_get_previous_state( );
1471	\|
1472	\| yy_cp = (yy_c_buf_p);
1473	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1474	\| goto yy_match;
1475	\|
1476	\| case EOB_ACT_LAST_MATCH:
1477	\| (yy_c_buf_p) =
1478	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
1479	\|
1480	\| yy_current_state = yy_get_previous_state( );
1481	\|
1482	\| yy_cp = (yy_c_buf_p);
1483	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1484	\| goto yy_find_action;
1485	\| }
1486	\| break;
1487	\| }
1488	\|
1489	\| default:
1490	\| YY_FATAL_ERROR(
1491	\| "fatal flex scanner internal error--no action found" );
1492	\| } /* end of action switch */
1493	\| } /* end of scanning one token */
1494	\| } /* end of yylex */
1495	\|
1496	\| /* yy_get_next_buffer - try to read in a new buffer
1497	\| *
1498	\| * Returns a code representing an action:
1499	\| * EOB_ACT_LAST_MATCH -
1500	\| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
1501	\| * EOB_ACT_END_OF_FILE - end of file
1502	\| */
1503	\| static int yy_get_next_buffer (void)
1504	\| {
1505	\| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
1506	\| register char *source = (yytext_ptr);
1507	\| register int number_to_move, i;
1508	\| int ret_val;
1509	\|
1510	\| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
1511	\| YY_FATAL_ERROR(
1512	\| "fatal flex scanner internal error--end of buffer missed" );
1513	\|
1514	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
1515	\| { /* Don't try to fill the buffer, so this is an EOF. */
1516	\| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
1517	\| {
1518	\| /* We matched a single character, the EOB, so
1519	\| * treat this as a final EOF.
1520	\| */
1521	\| return EOB_ACT_END_OF_FILE;
1522	\| }
1523	\|
1524	\| else
1525	\| {
1526	\| /* We matched some text prior to the EOB, first
1527	\| * process it.
1528	\| */
1529	\| return EOB_ACT_LAST_MATCH;
1530	\| }
1531	\| }
1532	\|
1533	\| /* Try to read more data. */
1534	\|
1535	\| /* First move last chars to start of buffer. */
1536	\| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
1537	\|
1538	\| for ( i = 0; i < number_to_move; ++i )
1539	\| (dest++) = (source++);
1540	\|
1541	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
1542	\| /* don't do the read, it's not guaranteed to return an EOF,
1543	\| * just force an EOF
1544	\| */
1545	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
1546	\|
1547	\| else
1548	\| {
1549	\| yy_size_t num_to_read =
1550	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
1551	\|
1552	\| while ( num_to_read <= 0 )
1553	\| { /* Not enough room in the buffer - grow it. */
1554	\|
1555	\| YY_FATAL_ERROR(
1556	\| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
1557	\|
1558	\| }
1559	\|
1560	\| if ( num_to_read > YY_READ_BUF_SIZE )
1561	\| num_to_read = YY_READ_BUF_SIZE;
1562	\|
1563	\| /* Read in more data. */
1564	\| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
1565	\| (yy_n_chars), num_to_read );
1566	\|
1567	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1568	\| }
1569	\|
1570	\| if ( (yy_n_chars) == 0 )
1571	\| {
1572	\| if ( number_to_move == YY_MORE_ADJ )
1573	\| {
1574	\| ret_val = EOB_ACT_END_OF_FILE;
1575	\| yyrestart(yyin );
1576	\| }
1577	\|
1578	\| else
1579	\| {
1580	\| ret_val = EOB_ACT_LAST_MATCH;
1581	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
1582	\| YY_BUFFER_EOF_PENDING;
1583	\| }
1584	\| }
1585	\|
1586	\| else
1587	\| ret_val = EOB_ACT_CONTINUE_SCAN;
1588	\|
1589	\| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
1590	\| /* Extend the array by 50%, plus the number we really need. */
1591	\| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
1592	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char ) yyrealloc((void ) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
1593	\| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1594	\| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
1595	\| }
1596	\|
1597	\| (yy_n_chars) += number_to_move;
1598	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
1599	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
1600	\|
1601	\| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
1602	\|
1603	\| return ret_val;
1604	\| }
1605	\|
1606	\| /* yy_get_previous_state - get the state just before the EOB char was reached */
1607	\|
1608	\| static yy_state_type yy_get_previous_state (void)
1609	\| {
1610	\| register yy_state_type yy_current_state;
1611	\| register char *yy_cp;
1612	\|
1613	\| yy_current_state = (yy_start);
1614	\|
1615	\| (yy_state_ptr) = (yy_state_buf);
1616	\| *(yy_state_ptr)++ = yy_current_state;
1617	\|
1618	\| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
1619	\| {
1620	\| register YY_CHAR yy_c = (yy_cp ? yy_ec[YY_SC_TO_UI(yy_cp)] : 1);
1621	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1622	\| {
1623	\| yy_current_state = (int) yy_def[yy_current_state];
1624	\| if ( yy_current_state >= 13 )
1625	\| yy_c = yy_meta[(unsigned int) yy_c];
1626	\| }
1627	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1628	\| *(yy_state_ptr)++ = yy_current_state;
1629	\| }
1630	\|
1631	\| return yy_current_state;
1632	\| }
1633	\|
1634	\| /* yy_try_NUL_trans - try to make a transition on the NUL character
1635	\| *
1636	\| * synopsis
1637	\| * next_state = yy_try_NUL_trans( current_state );
1638	\| */
1639	\| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
1640	\| {
1641	\| register int yy_is_jam;
1642	\|
1643	\| register YY_CHAR yy_c = 1;
1644	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1645	\| {
1646	\| yy_current_state = (int) yy_def[yy_current_state];
1647	\| if ( yy_current_state >= 13 )
1648	\| yy_c = yy_meta[(unsigned int) yy_c];
1649	\| }
1650	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1651	\| yy_is_jam = (yy_current_state == 12);
1652	\| if ( ! yy_is_jam )
1653	\| *(yy_state_ptr)++ = yy_current_state;
1654	\|
1655	\| return yy_is_jam ? 0 : yy_current_state;
1656	\| }
1657	\|
1658	\| static void yyunput (int c, register char * yy_bp )
1659	\| {
1660	\| register char *yy_cp;
1661	\|
1662	\| yy_cp = (yy_c_buf_p);
1663	\|
1664	\| /* undo effects of setting up yytext */
1665	\| *yy_cp = (yy_hold_char);
1666	\|
1667	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1668	\| { /* need to shift things up to make room */
1669	\| /* +2 for EOB chars. */
1670	\| register yy_size_t number_to_move = (yy_n_chars) + 2;
1671	\| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
1672	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
1673	\| register char *source =
1674	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
1675	\|
1676	\| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1677	\| --dest = --source;
1678	\|
1679	\| yy_cp += (int) (dest - source);
1680	\| yy_bp += (int) (dest - source);
1681	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
1682	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
1683	\|
1684	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1685	\| YY_FATAL_ERROR( "flex scanner push-back overflow" );
1686	\| }
1687	\|
1688	\| *--yy_cp = (char) c;
1689	\|
1690	\| (yytext_ptr) = yy_bp;
1691	\| (yy_hold_char) = *yy_cp;
1692	\| (yy_c_buf_p) = yy_cp;
1693	\| }
1694	\|
1695	\| #ifndef YY_NO_INPUT
1696	\| #ifdef __cplusplus
1697	\| static int yyinput (void)
1698	\| #else
1699	\| static int input (void)
1700	\| #endif
1701	\|
1702	\| {
1703	\| int c;
1704	\|
1705	\| *(yy_c_buf_p) = (yy_hold_char);
1706	\|
1707	\| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
1708	\| {
1709	\| /* yy_c_buf_p now points to the character we want to return.
1710	\| * If this occurs before the EOB characters, then it's a
1711	\| * valid NUL; if not, then we've hit the end of the buffer.
1712	\| */
1713	\| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1714	\| /* This was really a NUL. */
1715	\| *(yy_c_buf_p) = '\0';
1716	\|
1717	\| else
1718	\| { /* need more input */
1719	\| yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
1720	\| ++(yy_c_buf_p);
1721	\|
1722	\| switch ( yy_get_next_buffer( ) )
1723	\| {
1724	\| case EOB_ACT_LAST_MATCH:
1725	\| /* This happens because yy_g_n_b()
1726	\| * sees that we've accumulated a
1727	\| * token and flags that we need to
1728	\| * try matching the token before
1729	\| * proceeding. But for input(),
1730	\| * there's no matching to consider.
1731	\| * So convert the EOB_ACT_LAST_MATCH
1732	\| * to EOB_ACT_END_OF_FILE.
1733	\| */
1734	\|
1735	\| /* Reset buffer status. */
1736	\| yyrestart(yyin );
1737	\|
1738	\| /FALLTHROUGH/
1739	\|
1740	\| case EOB_ACT_END_OF_FILE:
1741	\| {
1742	\| if ( yywrap( ) )
1743	\| return 0;
1744	\|
1745	\| if ( ! (yy_did_buffer_switch_on_eof) )
1746	\| YY_NEW_FILE;
1747	\| #ifdef __cplusplus
1748	\| return yyinput();
1749	\| #else
1750	\| return input();
1751	\| #endif
1752	\| }
1753	\|
1754	\| case EOB_ACT_CONTINUE_SCAN:
1755	\| (yy_c_buf_p) = (yytext_ptr) + offset;
1756	\| break;
1757	\| }
1758	\| }
1759	\| }
1760	\|
1761	\| c = (unsigned char ) (yy_c_buf_p); /* cast for 8-bit char's */
1762	\| (yy_c_buf_p) = '\0'; / preserve yytext */
1763	\| (yy_hold_char) = *++(yy_c_buf_p);
1764	\|
1765	\| return c;
1766	\| }
1767	\| #endif /* ifndef YY_NO_INPUT */
1768	\|
1769	\| /** Immediately switch to a different input stream.
1770	\| * @param input_file A readable stream.
1771	\| *
1772	\| * @note This function does not reset the start condition to @c INITIAL .
1773	\| */
1774	\| void yyrestart (FILE * input_file )
1775	\| {
1776	\|
1777	\| if ( ! YY_CURRENT_BUFFER ){
1778	\| yyensure_buffer_stack ();
1779	\| YY_CURRENT_BUFFER_LVALUE =
1780	\| yy_create_buffer(yyin,YY_BUF_SIZE );
1781	\| }
1782	\|
1783	\| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
1784	\| yy_load_buffer_state( );
1785	\| }
1786	\|
1787	\| /** Switch to a different input buffer.
1788	\| * @param new_buffer The new input buffer.
1789	\| *
1790	\| */
1791	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
1792	\| {
1793	\|
1794	\| /* TODO. We should be able to replace this entire function body
1795	\| * with
1796	\| * yypop_buffer_state();
1797	\| * yypush_buffer_state(new_buffer);
1798	\| */
1799	\| yyensure_buffer_stack ();
1800	\| if ( YY_CURRENT_BUFFER == new_buffer )
1801	\| return;
1802	\|
1803	\| if ( YY_CURRENT_BUFFER )
1804	\| {
1805	\| /* Flush out information for old buffer. */
1806	\| *(yy_c_buf_p) = (yy_hold_char);
1807	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1808	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1809	\| }
1810	\|
1811	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
1812	\| yy_load_buffer_state( );
1813	\|
1814	\| /* We don't actually know whether we did this switch during
1815	\| * EOF (yywrap()) processing, but the only time this flag
1816	\| * is looked at is after yywrap() is called, so it's safe
1817	\| * to go ahead and always set it.
1818	\| */
1819	\| (yy_did_buffer_switch_on_eof) = 1;
1820	\| }
1821	\|
1822	\| static void yy_load_buffer_state (void)
1823	\| {
1824	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1825	\| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
1826	\| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
1827	\| (yy_hold_char) = *(yy_c_buf_p);
1828	\| }
1829	\|
1830	\| /** Allocate and initialize an input buffer state.
1831	\| * @param file A readable stream.
1832	\| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
1833	\| *
1834	\| * @return the allocated buffer state.
1835	\| */
1836	\| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
1837	\| {
1838	\| YY_BUFFER_STATE b;
1839	\|
1840	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
1841	\| if ( ! b )
1842	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
1843	\|
1844	\| b->yy_buf_size = size;
1845	\|
1846	\| /* yy_ch_buf has to be 2 characters longer than the size given because
1847	\| * we need to put in 2 end-of-buffer characters.
1848	\| */
1849	\| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
1850	\| if ( ! b->yy_ch_buf )
1851	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
1852	\|
1853	\| b->yy_is_our_buffer = 1;
1854	\|
1855	\| yy_init_buffer(b,file );
1856	\|
1857	\| return b;
1858	\| }
1859	\|
1860	\| /** Destroy the buffer.
1861	\| * @param b a buffer created with yy_create_buffer()
1862	\| *
1863	\| */
1864	\| void yy_delete_buffer (YY_BUFFER_STATE b )
1865	\| {
1866	\|
1867	\| if ( ! b )
1868	\| return;
1869	\|
1870	\| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
1871	\| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
1872	\|
1873	\| if ( b->yy_is_our_buffer )
1874	\| yyfree((void *) b->yy_ch_buf );
1875	\|
1876	\| yyfree((void *) b );
1877	\| }
1878	\|
1879	\| #ifndef __cplusplus
1880	\| extern int isatty (int );
1881	\| #endif /* __cplusplus */
1882	\|
1883	\| /* Initializes or reinitializes a buffer.
1884	\| * This function is sometimes called more than once on the same buffer,
1885	\| * such as during a yyrestart() or at EOF.
1886	\| */
1887	\| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
1888	\|
1889	\| {
1890	\| int oerrno = errno;
1891	\|
1892	\| yy_flush_buffer(b );
1893	\|
1894	\| b->yy_input_file = file;
1895	\| b->yy_fill_buffer = 1;
1896	\|
1897	\| /* If b is the current buffer, then yy_init_buffer was _probably_
1898	\| * called from yyrestart() or through yy_get_next_buffer.
1899	\| * In that case, we don't want to reset the lineno or column.
1900	\| */
1901	\| if (b != YY_CURRENT_BUFFER){
1902	\| b->yy_bs_lineno = 1;
1903	\| b->yy_bs_column = 0;
1904	\| }
1905	\|
1906	\| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
1907	\|
1908	\| errno = oerrno;
1909	\| }
1910	\|
1911	\| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
1912	\| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
1913	\| *
1914	\| */
1915	\| void yy_flush_buffer (YY_BUFFER_STATE b )
1916	\| {
1917	\| if ( ! b )
1918	\| return;
1919	\|
1920	\| b->yy_n_chars = 0;
1921	\|
1922	\| /* We always need two end-of-buffer characters. The first causes
1923	\| * a transition to the end-of-buffer state. The second causes
1924	\| * a jam in that state.
1925	\| */
1926	\| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
1927	\| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
1928	\|
1929	\| b->yy_buf_pos = &b->yy_ch_buf[0];
1930	\|
1931	\| b->yy_at_bol = 1;
1932	\| b->yy_buffer_status = YY_BUFFER_NEW;
1933	\|
1934	\| if ( b == YY_CURRENT_BUFFER )
1935	\| yy_load_buffer_state( );
1936	\| }
1937	\|
1938	\| /** Pushes the new state onto the stack. The new state becomes
1939	\| * the current state. This function will allocate the stack
1940	\| * if necessary.
1941	\| * @param new_buffer The new state.
1942	\| *
1943	\| */
1944	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
1945	\| {
1946	\| if (new_buffer == NULL)
1947	\| return;
1948	\|
1949	\| yyensure_buffer_stack();
1950	\|
1951	\| /* This block is copied from yy_switch_to_buffer. */
1952	\| if ( YY_CURRENT_BUFFER )
1953	\| {
1954	\| /* Flush out information for old buffer. */
1955	\| *(yy_c_buf_p) = (yy_hold_char);
1956	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1957	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1958	\| }
1959	\|
1960	\| /* Only push if top exists. Otherwise, replace top. */
1961	\| if (YY_CURRENT_BUFFER)
1962	\| (yy_buffer_stack_top)++;
1963	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
1964	\|
1965	\| /* copied from yy_switch_to_buffer. */
1966	\| yy_load_buffer_state( );
1967	\| (yy_did_buffer_switch_on_eof) = 1;
1968	\| }
1969	\|
1970	\| /** Removes and deletes the top of the stack, if present.
1971	\| * The next element becomes the new top.
1972	\| *
1973	\| */
1974	\| void yypop_buffer_state (void)
1975	\| {
1976	\| if (!YY_CURRENT_BUFFER)
1977	\| return;
1978	\|
1979	\| yy_delete_buffer(YY_CURRENT_BUFFER );
1980	\| YY_CURRENT_BUFFER_LVALUE = NULL;
1981	\| if ((yy_buffer_stack_top) > 0)
1982	\| --(yy_buffer_stack_top);
1983	\|
1984	\| if (YY_CURRENT_BUFFER) {
1985	\| yy_load_buffer_state( );
1986	\| (yy_did_buffer_switch_on_eof) = 1;
1987	\| }
1988	\| }
1989	\|
1990	\| /* Allocates the stack if it does not exist.
1991	\| * Guarantees space for at least one push.
1992	\| */
1993	\| static void yyensure_buffer_stack (void)
1994	\| {
1995	\| yy_size_t num_to_alloc;
1996	\|
1997	\| if (!(yy_buffer_stack)) {
1998	\|
1999	\| /* First allocation is just for 2 elements, since we don't know if this
2000	\| * scanner will even need a stack. We use 2 instead of 1 to avoid an
2001	\| * immediate realloc on the next call.
2002	\| */
2003	\| num_to_alloc = 1;
2004	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
2005	\| (num_to_alloc * sizeof(struct yy_buffer_state*)
2006	\| );
2007	\| if ( ! (yy_buffer_stack) )
2008	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
2009	\|
2010	\| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
2011	\|
2012	\| (yy_buffer_stack_max) = num_to_alloc;
2013	\| (yy_buffer_stack_top) = 0;
2014	\| return;
2015	\| }
2016	\|
2017	\| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
2018	\|
2019	\| /* Increase the buffer to prepare for a possible push. */
2020	\| int grow_size = 8 /* arbitrary grow size */;
2021	\|
2022	\| num_to_alloc = (yy_buffer_stack_max) + grow_size;
2023	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
2024	\| ((yy_buffer_stack),
2025	\| num_to_alloc * sizeof(struct yy_buffer_state*)
2026	\| );
2027	\| if ( ! (yy_buffer_stack) )
2028	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
2029	\|
2030	\| /* zero only the new slots.*/
2031	\| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
2032	\| (yy_buffer_stack_max) = num_to_alloc;
2033	\| }
2034	\| }
2035	\|
2036	\| /** Setup the input buffer state to scan directly from a user-specified character buffer.
2037	\| * @param base the character buffer
2038	\| * @param size the size in bytes of the character buffer
2039	\| *
2040	\| * @return the newly allocated buffer state object.
2041	\| */
2042	\| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
2043	\| {
2044	\| YY_BUFFER_STATE b;
2045	\|
2046	\| if ( size < 2 \|\|
2047	\| base[size-2] != YY_END_OF_BUFFER_CHAR \|\|
2048	\| base[size-1] != YY_END_OF_BUFFER_CHAR )
2049	\| /* They forgot to leave room for the EOB's. */
2050	\| return 0;
2051	\|
2052	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
2053	\| if ( ! b )
2054	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
2055	\|
2056	\| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
2057	\| b->yy_buf_pos = b->yy_ch_buf = base;
2058	\| b->yy_is_our_buffer = 0;
2059	\| b->yy_input_file = 0;
2060	\| b->yy_n_chars = b->yy_buf_size;
2061	\| b->yy_is_interactive = 0;
2062	\| b->yy_at_bol = 1;
2063	\| b->yy_fill_buffer = 0;
2064	\| b->yy_buffer_status = YY_BUFFER_NEW;
2065	\|
2066	\| yy_switch_to_buffer(b );
2067	\|
2068	\| return b;
2069	\| }
2070	\|
2071	\| /** Setup the input buffer state to scan a string. The next call to yylex() will
2072	\| * scan from a @e copy of @a str.
2073	\| * @param yystr a NUL-terminated string to scan
2074	\| *
2075	\| * @return the newly allocated buffer state object.
2076	\| * @note If you want to scan bytes that may contain NUL values, then use
2077	\| * yy_scan_bytes() instead.
2078	\| */
2079	\| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
2080	\| {
2081	\|
2082	\| return yy_scan_bytes(yystr,strlen(yystr) );
2083	\| }
2084	\|
2085	\| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
2086	\| * scan from a @e copy of @a bytes.
2087	\| * @param bytes the byte buffer to scan
2088	\| * @param len the number of bytes in the buffer pointed to by @a bytes.
2089	\| *
2090	\| * @return the newly allocated buffer state object.
2091	\| */
2092	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
2093	\| {
2094	\| YY_BUFFER_STATE b;
2095	\| char *buf;
2096	\| yy_size_t n, i;
2097	\|
2098	\| /* Get memory for full buffer, including space for trailing EOB's. */
2099	\| n = _yybytes_len + 2;
2100	\| buf = (char *) yyalloc(n );
2101	\| if ( ! buf )
2102	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
2103	\|
2104	\| for ( i = 0; i < _yybytes_len; ++i )
2105	\| buf[i] = yybytes[i];
2106	\|
2107	\| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
2108	\|
2109	\| b = yy_scan_buffer(buf,n );
2110	\| if ( ! b )
2111	\| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
2112	\|
2113	\| /* It's okay to grow etc. this buffer, and we should throw it
2114	\| * away when we're done.
2115	\| */
2116	\| b->yy_is_our_buffer = 1;
2117	\|
2118	\| return b;
2119	\| }
2120	\|
2121	\| #ifndef YY_EXIT_FAILURE
2122	\| #define YY_EXIT_FAILURE 2
2123	\| #endif
2124	\|
2125	\| static void yy_fatal_error (yyconst char* msg )
2126	\| {
2127	\| (void) fprintf( stderr, "%s\n", msg );
2128	\| exit( YY_EXIT_FAILURE );
2129	\| }
2130	\|
2131	\| /* Redefine yyless() so it works in section 3 code. */
2132	\|
2133	\| #undef yyless
2134	\| #define yyless(n) \
2135	\| do \
2136	\| { \
2137	\| /* Undo effects of setting up yytext. */ \
2138	\| int yyless_macro_arg = (n); \
2139	\| YY_LESS_LINENO(yyless_macro_arg);\
2140	\| yytext[yyleng] = (yy_hold_char); \
2141	\| (yy_c_buf_p) = yytext + yyless_macro_arg; \
2142	\| (yy_hold_char) = *(yy_c_buf_p); \
2143	\| *(yy_c_buf_p) = '\0'; \
2144	\| yyleng = yyless_macro_arg; \
2145	\| } \
2146	\| while ( 0 )
2147	\|
2148	\| /* Accessor methods (get/set functions) to struct members. */
2149	\|
2150	\| /** Get the current line number.
2151	\| *
2152	\| */
2153	\| int yyget_lineno (void)
2154	\| {
2155	\|
2156	\| return yylineno;
2157	\| }
2158	\|
2159	\| /** Get the input stream.
2160	\| *
2161	\| */
2162	\| FILE *yyget_in (void)
2163	\| {
2164	\| return yyin;
2165	\| }
2166	\|
2167	\| /** Get the output stream.
2168	\| *
2169	\| */
2170	\| FILE *yyget_out (void)
2171	\| {
2172	\| return yyout;
2173	\| }
2174	\|
2175	\| /** Get the length of the current token.
2176	\| *
2177	\| */
2178	\| yy_size_t yyget_leng (void)
2179	\| {
2180	\| return yyleng;
2181	\| }
2182	\|
2183	\| /** Get the current token.
2184	\| *
2185	\| */
2186	\|
2187	\| char *yyget_text (void)
2188	\| {
2189	\| return yytext;
2190	\| }
2191	\|
2192	\| /** Set the current line number.
2193	\| * @param line_number
2194	\| *
2195	\| */
2196	\| void yyset_lineno (int line_number )
2197	\| {
2198	\|
2199	\| yylineno = line_number;
2200	\| }
2201	\|
2202	\| /** Set the input stream. This does not discard the current
2203	\| * input buffer.
2204	\| * @param in_str A readable stream.
2205	\| *
2206	\| * @see yy_switch_to_buffer
2207	\| */
2208	\| void yyset_in (FILE * in_str )
2209	\| {
2210	\| yyin = in_str ;
2211	\| }
2212	\|
2213	\| void yyset_out (FILE * out_str )
2214	\| {
2215	\| yyout = out_str ;
2216	\| }
2217	\|
2218	\| int yyget_debug (void)
2219	\| {
2220	\| return yy_flex_debug;
2221	\| }
2222	\|
2223	\| void yyset_debug (int bdebug )
2224	\| {
2225	\| yy_flex_debug = bdebug ;
2226	\| }
2227	\|
2228	\| static int yy_init_globals (void)
2229	\| {
2230	\| /* Initialization is the same as for the non-reentrant scanner.
2231	\| * This function is called from yylex_destroy(), so don't allocate here.
2232	\| */
2233	\|
2234	\| (yy_buffer_stack) = 0;
2235	\| (yy_buffer_stack_top) = 0;
2236	\| (yy_buffer_stack_max) = 0;
2237	\| (yy_c_buf_p) = (char *) 0;
2238	\| (yy_init) = 0;
2239	\| (yy_start) = 0;
2240	\|
2241	\| (yy_state_buf) = 0;
2242	\| (yy_state_ptr) = 0;
2243	\| (yy_full_match) = 0;
2244	\| (yy_lp) = 0;
2245	\|
2246	\| /* Defined in main.c */
2247	\| #ifdef YY_STDINIT
2248	\| yyin = stdin;
2249	\| yyout = stdout;
2250	\| #else
2251	\| yyin = (FILE *) 0;
2252	\| yyout = (FILE *) 0;
2253	\| #endif
2254	\|
2255	\| /* For future reference: Set errno on error, since we are called by
2256	\| * yylex_init()
2257	\| */
2258	\| return 0;
2259	\| }
2260	\|
2261	\| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
2262	\| int yylex_destroy (void)
2263	\| {
2264	\|
2265	\| /* Pop the buffer stack, destroying each element. */
2266	\| while(YY_CURRENT_BUFFER){
2267	\| yy_delete_buffer(YY_CURRENT_BUFFER );
2268	\| YY_CURRENT_BUFFER_LVALUE = NULL;
2269	\| yypop_buffer_state();
2270	\| }
2271	\|
2272	\| /* Destroy the stack itself. */
2273	\| yyfree((yy_buffer_stack) );
2274	\| (yy_buffer_stack) = NULL;
2275	\|
2276	\| yyfree ( (yy_state_buf) );
2277	\| (yy_state_buf) = NULL;
2278	\|
2279	\| /* Reset the globals. This is important in a non-reentrant scanner so the next time
2280	\| * yylex() is called, initialization will occur. */
2281	\| yy_init_globals( );
2282	\|
2283	\| return 0;
2284	\| }
2285	\|
2286	\| /*
2287	\| * Internal utility routines.
2288	\| */
2289	\|
2290	\| #ifndef yytext_ptr
2291	\| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
2292	\| {
2293	\| register int i;
2294	\| for ( i = 0; i < n; ++i )
2295	\| s1[i] = s2[i];
2296	\| }
2297	\| #endif
2298	\|
2299	\| #ifdef YY_NEED_STRLEN
2300	\| static int yy_flex_strlen (yyconst char * s )
2301	\| {
2302	\| register int n;
2303	\| for ( n = 0; s[n]; ++n )
2304	\| ;
2305	\|
2306	\| return n;
2307	\| }
2308	\| #endif
2309	\|
2310	\| void *yyalloc (yy_size_t size )
2311	\| {
2312	\| return (void *) malloc( size );
2313	\| }
2314	\|
2315	\| void yyrealloc (void ptr, yy_size_t size )
2316	\| {
2317	\| /* The cast to (char *) in the following accommodates both
2318	\| * implementations that use char* generic pointers, and those
2319	\| * that use void* generic pointers. It works with the latter
2320	\| * because both ANSI C and C++ allow castless assignment from
2321	\| * any pointer type to void*, and deal with argument conversions
2322	\| * as though doing an assignment.
2323	\| */
2324	\| return (void ) realloc( (char ) ptr, size );
2325	\| }
2326	\|
2327	\| void yyfree (void * ptr )
2328	\| {
2329	\| free( (char ) ptr ); / see yyrealloc() for (char ) cast /
2330	\| }
2331	\|
2332	\| #define YYTABLES_NAME "yytables"
2333	\|
2334	\| #line 9 "conftest.l"
2335	\|
2336	\|
2337	\| #ifdef YYTEXT_POINTER
2338	\| extern char *yytext;
2339	\| #endif
2340	\| int
2341	\| main (void)
2342	\| {
2343	\| return ! yylex () + ! yywrap ();
2344	\| }
2345	configure:15997: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c -lfl >&5
2346	configure:15997: $? = 0
2347	configure:16007: result: -lfl
2348	configure:16013: checking whether yytext is a pointer
2349	configure:16030: /usr/bin/gcc-4.2 -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 conftest.c -lfl >&5
2350	configure:16030: $? = 0
2351	configure:16038: result: yes
2352	configure:16053: checking for flex
2353	configure:16071: found /usr/bin/flex
2354	configure:16083: result: /usr/bin/flex
2355	configure:16097: checking for pod2man
2356	configure:16115: found /opt/local/bin/pod2man
2357	configure:16127: result: /opt/local/bin/pod2man
2358	configure:16144: checking for pod2html
2359	configure:16162: found /opt/local/bin/pod2html
2360	configure:16174: result: /opt/local/bin/pod2html
2361	configure:16198: checking for xdg-open
2362	configure:16231: result: no
2363	configure:16259: checking for htmlview
2364	configure:16292: result: no
2365	configure:16363: checking for doxygen
2366	configure:16396: result: no
2367	configure:16403: checking for doxygen
2368	configure:16431: result: no
2369	configure:16510: checking for pkg-config
2370	configure:16528: found /opt/local/bin/pkg-config
2371	configure:16540: result: /opt/local/bin/pkg-config
2372	configure:16565: checking pkg-config is at least version 0.9.0
2373	configure:16568: result: yes
2374	configure:16666: checking whether we can build for OS X 10.6
2375	configure:16708: result: no
2376	configure:16710: error: We couldn't find the SDK for OS X 10.6
2377
2378	## ---------------- ##
2379	## Cache variables. ##
2380	## ---------------- ##
2381
2382	ac_cv_build=x86_64-apple-darwin10.8.0
2383	ac_cv_c_compiler_gnu=yes
2384	ac_cv_cxx_compiler_gnu=yes
2385	ac_cv_env_CCC_set=
2386	ac_cv_env_CCC_value=
2387	ac_cv_env_CC_set=set
2388	ac_cv_env_CC_value=/usr/bin/gcc-4.2
2389	ac_cv_env_CFLAGS_set=set
2390	ac_cv_env_CFLAGS_value='-pipe -Os -arch x86_64'
2391	ac_cv_env_CPPFLAGS_set=set
2392	ac_cv_env_CPPFLAGS_value=-I/opt/local/include
2393	ac_cv_env_CPP_set=
2394	ac_cv_env_CPP_value=
2395	ac_cv_env_CXXCPP_set=
2396	ac_cv_env_CXXCPP_value=
2397	ac_cv_env_CXXFLAGS_set=set
2398	ac_cv_env_CXXFLAGS_value='-pipe -Os -arch x86_64'
2399	ac_cv_env_CXX_set=set
2400	ac_cv_env_CXX_value=/usr/bin/g++-4.2
2401	ac_cv_env_LDFLAGS_set=set
2402	ac_cv_env_LDFLAGS_value='-L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64'
2403	ac_cv_env_LIBGNUTLS_CFLAGS_set=
2404	ac_cv_env_LIBGNUTLS_CFLAGS_value=
2405	ac_cv_env_LIBGNUTLS_LIBS_set=
2406	ac_cv_env_LIBGNUTLS_LIBS_value=
2407	ac_cv_env_LIBNL1_CFLAGS_set=
2408	ac_cv_env_LIBNL1_CFLAGS_value=
2409	ac_cv_env_LIBNL1_LIBS_set=
2410	ac_cv_env_LIBNL1_LIBS_value=
2411	ac_cv_env_LIBNL2_CFLAGS_set=
2412	ac_cv_env_LIBNL2_CFLAGS_value=
2413	ac_cv_env_LIBNL2_LIBS_set=
2414	ac_cv_env_LIBNL2_LIBS_value=
2415	ac_cv_env_LIBNL3_CFLAGS_set=
2416	ac_cv_env_LIBNL3_CFLAGS_value=
2417	ac_cv_env_LIBNL3_LIBS_set=
2418	ac_cv_env_LIBNL3_LIBS_value=
2419	ac_cv_env_LIBS_set=
2420	ac_cv_env_LIBS_value=
2421	ac_cv_env_PKG_CONFIG_LIBDIR_set=
2422	ac_cv_env_PKG_CONFIG_LIBDIR_value=
2423	ac_cv_env_PKG_CONFIG_PATH_set=
2424	ac_cv_env_PKG_CONFIG_PATH_value=
2425	ac_cv_env_PKG_CONFIG_set=
2426	ac_cv_env_PKG_CONFIG_value=
2427	ac_cv_env_YACC_set=
2428	ac_cv_env_YACC_value=
2429	ac_cv_env_YFLAGS_set=
2430	ac_cv_env_YFLAGS_value=
2431	ac_cv_env_build_alias_set=
2432	ac_cv_env_build_alias_value=
2433	ac_cv_env_host_alias_set=
2434	ac_cv_env_host_alias_value=
2435	ac_cv_env_target_alias_set=
2436	ac_cv_env_target_alias_value=
2437	ac_cv_header_dlfcn_h=yes
2438	ac_cv_header_inttypes_h=yes
2439	ac_cv_header_memory_h=yes
2440	ac_cv_header_stdc=yes
2441	ac_cv_header_stdint_h=yes
2442	ac_cv_header_stdlib_h=yes
2443	ac_cv_header_string_h=yes
2444	ac_cv_header_strings_h=yes
2445	ac_cv_header_sys_stat_h=yes
2446	ac_cv_header_sys_types_h=yes
2447	ac_cv_header_unistd_h=yes
2448	ac_cv_host=x86_64-apple-darwin10.8.0
2449	ac_cv_lib_dl_dlopen=yes
2450	ac_cv_lib_lex=-lfl
2451	ac_cv_objext=o
2452	ac_cv_path_EGREP='/usr/bin/grep -E'
2453	ac_cv_path_FGREP='/usr/bin/grep -F'
2454	ac_cv_path_GREP=/usr/bin/grep
2455	ac_cv_path_LEX=/usr/bin/flex
2456	ac_cv_path_PERL=/opt/local/bin/perl
2457	ac_cv_path_POD2HTML=/opt/local/bin/pod2html
2458	ac_cv_path_POD2MAN=/opt/local/bin/pod2man
2459	ac_cv_path_PYTHON=/usr/bin/python
2460	ac_cv_path_SED=/opt/local/bin/gsed
2461	ac_cv_path_YACCDUMMY=/opt/local/bin/bison
2462	ac_cv_path_ac_pt_PKG_CONFIG=/opt/local/bin/pkg-config
2463	ac_cv_prog_AWK=gawk
2464	ac_cv_prog_CPP='/usr/bin/gcc-4.2 -E'
2465	ac_cv_prog_CXXCPP='/usr/bin/g++-4.2 -E'
2466	ac_cv_prog_HAVE_DOXYGEN=no
2467	ac_cv_prog_LEX=flex
2468	ac_cv_prog_YACC='bison -y'
2469	ac_cv_prog_ac_ct_AR=ar
2470	ac_cv_prog_ac_ct_CC=/usr/bin/gcc-4.2
2471	ac_cv_prog_ac_ct_DSYMUTIL=dsymutil
2472	ac_cv_prog_ac_ct_LIPO=lipo
2473	ac_cv_prog_ac_ct_NMEDIT=nmedit
2474	ac_cv_prog_ac_ct_OTOOL=otool
2475	ac_cv_prog_ac_ct_RANLIB=ranlib
2476	ac_cv_prog_ac_ct_STRIP=strip
2477	ac_cv_prog_cc__usr_bin_gcc_4_2_c_o=yes
2478	ac_cv_prog_cc_c89=
2479	ac_cv_prog_cc_g=yes
2480	ac_cv_prog_cxx_g=yes
2481	ac_cv_prog_lex_root=lex.yy
2482	ac_cv_prog_lex_yytext_pointer=yes
2483	ac_cv_prog_make_make_set=yes
2484	ac_cv_target=x86_64-apple-darwin10.8.0
2485	am_cv_CC_dependencies_compiler_type=gcc3
2486	am_cv_CXX_dependencies_compiler_type=gcc3
2487	am_cv_prog_tar_ustar=gnutar
2488	lt_cv_apple_cc_single_mod=yes
2489	lt_cv_ar_at_file=no
2490	lt_cv_deplibs_check_method=pass_all
2491	lt_cv_dlopen=dlopen
2492	lt_cv_dlopen_libs=-ldl
2493	lt_cv_dlopen_self=yes
2494	lt_cv_dlopen_self_static=yes
2495	lt_cv_file_magic_cmd='$MAGIC_CMD'
2496	lt_cv_file_magic_test_file=
2497	lt_cv_ld_exported_symbols_list=yes
2498	lt_cv_ld_force_load=yes
2499	lt_cv_ld_reload_flag=-r
2500	lt_cv_nm_interface='BSD nm'
2501	lt_cv_objdir=.libs
2502	lt_cv_path_LD=/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
2503	lt_cv_path_LDCXX=/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
2504	lt_cv_path_NM=/usr/bin/nm
2505	lt_cv_path_mainfest_tool=no
2506	lt_cv_prog_compiler_c_o=yes
2507	lt_cv_prog_compiler_c_o_CXX=yes
2508	lt_cv_prog_compiler_pic='-fno-common -DPIC'
2509	lt_cv_prog_compiler_pic_CXX='-fno-common -DPIC'
2510	lt_cv_prog_compiler_pic_works=yes
2511	lt_cv_prog_compiler_pic_works_CXX=yes
2512	lt_cv_prog_compiler_rtti_exceptions=no
2513	lt_cv_prog_compiler_static_works=no
2514	lt_cv_prog_compiler_static_works_CXX=no
2515	lt_cv_prog_gnu_ld=no
2516	lt_cv_prog_gnu_ldcxx=no
2517	lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
2518	lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.[ ]$[BCDEGRST][BCDEGRST]$[ ][ ]_$[_A-Za-z][_A-Za-z0-9]$$/\1 _\2 \2/p'\'' \| sed '\''/ __gnu_lto/d'\'''
2519	lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: $[^ ]$[ ]$/ {\"\1\", (void ) 0},/p'\'' -e '\''s/^[BCDEGRST] $[^ ]$ $[^ ]$$/ {"\2", (void *) \&\2},/p'\'''
2520	lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: $[^ ]$[ ]$/ {\"\1\", (void ) 0},/p'\'' -e '\''s/^[BCDEGRST] $[^ ]$ $lib[^ ]$$/ {"\2", (void ) \&\2},/p'\'' -e '\''s/^[BCDEGRST] $[^ ]$ $[^ ]$$/ {"lib\2", (void *) \&\2},/p'\'''
2521	lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* $.$$/extern int \1();/p'\'' -e '\''s/^[BCDEGRST] .* $.*$$/extern char \1;/p'\'''
2522	lt_cv_sys_max_cmd_len=196608
2523	lt_cv_to_host_file_cmd=func_convert_file_noop
2524	lt_cv_to_tool_file_cmd=func_convert_file_noop
2525
2526	## ----------------- ##
2527	## Output variables. ##
2528	## ----------------- ##
2529
2530	A2X=''
2531	ACLOCAL='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/missing --run aclocal-1.11'
2532	AC_MIN_VERSION='2.60'
2533	ADNS_LIBS=''
2534	AMDEPBACKSLASH='\'
2535	AMDEP_FALSE='#'
2536	AMDEP_TRUE=''
2537	AMTAR='$${TAR-tar}'
2538	AM_BACKSLASH=''
2539	AM_DEFAULT_V=''
2540	AM_DEFAULT_VERBOSITY=''
2541	AM_V=''
2542	APPLICATIONSERVICES_FRAMEWORKS=''
2543	AR='ar'
2544	AUTOCONF='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/missing --run autoconf'
2545	AUTOHEADER='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/missing --run autoheader'
2546	AUTOMAKE='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/missing --run automake-1.11'
2547	AWK='gawk'
2548	CC='/usr/bin/gcc-4.2'
2549	CCDEPMODE='depmode=gcc3'
2550	CC_FOR_BUILD='/usr/bin/gcc-4.2'
2551	CFLAGS='-pipe -Os -arch x86_64'
2552	CFLAGS_FOR_BUILD=''
2553	COREFOUNDATION_FRAMEWORKS=''
2554	CPP='/usr/bin/gcc-4.2 -E'
2555	CPPFLAGS='-I/opt/local/include'
2556	CXX='/usr/bin/g++-4.2'
2557	CXXCPP='/usr/bin/g++-4.2 -E'
2558	CXXDEPMODE='depmode=gcc3'
2559	CXXFLAGS='-pipe -Os -arch x86_64'
2560	CYGPATH_W='echo'
2561	C_ARES_LIBS=''
2562	DEFS=''
2563	DEPDIR='.deps'
2564	DESKTOP_FILE_INSTALL=''
2565	DLLTOOL='false'
2566	DOXYGEN=''
2567	DSYMUTIL='dsymutil'
2568	DUMPBIN=''
2569	DUMPCAP_GROUP=''
2570	ECHO_C='\c'
2571	ECHO_N=''
2572	ECHO_T=''
2573	EGREP='/usr/bin/grep -E'
2574	ELINKS=''
2575	ENABLE_STATIC=''
2576	ENABLE_STATIC_FALSE=''
2577	ENABLE_STATIC_TRUE=''
2578	EXEEXT=''
2579	FGREP='/usr/bin/grep -F'
2580	FOP=''
2581	GEOIP_LIBS=''
2582	GETOPT_LO=''
2583	GLIB_CFLAGS=''
2584	GLIB_GENMARSHAL=''
2585	GLIB_LIBS=''
2586	GLIB_MIN_VERSION=''
2587	GLIB_MKENUMS=''
2588	GOBJECT_QUERY=''
2589	GREP='/usr/bin/grep'
2590	GTK2_MIN_VERSION=''
2591	GTK3_MIN_VERSION=''
2592	GTK_CFLAGS=''
2593	GTK_LIBS=''
2594	HAVE_A2X=''
2595	HAVE_A2X_FALSE=''
2596	HAVE_A2X_TRUE=''
2597	HAVE_BLESS=''
2598	HAVE_DOXYGEN='no'
2599	HAVE_DOXYGEN_FALSE=''
2600	HAVE_DOXYGEN_TRUE='#'
2601	HAVE_DPKG_BUILDPACKAGE=''
2602	HAVE_DUMPCAP_GROUP_FALSE=''
2603	HAVE_DUMPCAP_GROUP_TRUE=''
2604	HAVE_ELINKS=''
2605	HAVE_ELINKS_FALSE=''
2606	HAVE_ELINKS_TRUE=''
2607	HAVE_FOP=''
2608	HAVE_FOP_FALSE=''
2609	HAVE_FOP_TRUE=''
2610	HAVE_HDIUTIL=''
2611	HAVE_LIBLUA_FALSE=''
2612	HAVE_LIBLUA_TRUE=''
2613	HAVE_LIBPORTAUDIO_FALSE=''
2614	HAVE_LIBPORTAUDIO_TRUE=''
2615	HAVE_LIBPY_FALSE=''
2616	HAVE_LIBPY_TRUE=''
2617	HAVE_LYNX=''
2618	HAVE_LYNX_FALSE=''
2619	HAVE_LYNX_TRUE=''
2620	HAVE_OSX_PACKAGING=''
2621	HAVE_PKGMK=''
2622	HAVE_PKGPROTO=''
2623	HAVE_PKGTRANS=''
2624	HAVE_PLUGINS_FALSE=''
2625	HAVE_PLUGINS_TRUE=''
2626	HAVE_Qt_FALSE=''
2627	HAVE_Qt_TRUE=''
2628	HAVE_RPM=''
2629	HAVE_SVR4_PACKAGING=''
2630	HAVE_W3M=''
2631	HAVE_W3M_FALSE=''
2632	HAVE_W3M_TRUE=''
2633	HAVE_WARNINGS_AS_ERRORS_FALSE=''
2634	HAVE_WARNINGS_AS_ERRORS_TRUE=''
2635	HAVE_WIRESHARK_CXX_FALSE=''
2636	HAVE_WIRESHARK_CXX_TRUE=''
2637	HAVE_XCODEBUILD=''
2638	HAVE_XMLLINT=''
2639	HAVE_XMLLINT_FALSE=''
2640	HAVE_XMLLINT_TRUE=''
2641	HAVE_XSLTPROC=''
2642	HAVE_XSLTPROC_FALSE=''
2643	HAVE_XSLTPROC_TRUE=''
2644	HTML_VIEWER=''
2645	INET_ATON_LO=''
2646	INET_NTOP_LO=''
2647	INET_PTON_LO=''
2648	INSTALL_DATA='${INSTALL} -m 644'
2649	INSTALL_PROGRAM='${INSTALL}'
2650	INSTALL_SCRIPT='${INSTALL}'
2651	INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
2652	KRB5_CONFIG=''
2653	KRB5_LIBS=''
2654	LD='/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld'
2655	LDFLAGS='-L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64'
2656	LDFLAGS_SHAREDLIB=''
2657	LEX='/usr/bin/flex'
2658	LEXLIB='-lfl'
2659	LEX_OUTPUT_ROOT='lex.yy'
2660	LIBCAP_LIBS=''
2661	LIBGCRYPT_CFLAGS=''
2662	LIBGCRYPT_CONFIG=''
2663	LIBGCRYPT_LIBS=''
2664	LIBGNUTLS_CFLAGS=''
2665	LIBGNUTLS_LIBS=''
2666	LIBNL1_CFLAGS=''
2667	LIBNL1_LIBS=''
2668	LIBNL2_CFLAGS=''
2669	LIBNL2_LIBS=''
2670	LIBNL3_CFLAGS=''
2671	LIBNL3_LIBS=''
2672	LIBOBJS=''
2673	LIBS=''
2674	LIBSMI_CFLAGS=''
2675	LIBSMI_LDFLAGS=''
2676	LIBSMI_VERSION=''
2677	LIBTOOL='$(SHELL) $(top_builddir)/libtool'
2678	LIBTOOL_DEPS='./ltmain.sh'
2679	LIPO='lipo'
2680	LN_S='ln -s'
2681	LTLIBOBJS=''
2682	LUA_INCLUDES=''
2683	LUA_LIBS=''
2684	LYNX=''
2685	MAKEINFO='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/missing --run makeinfo'
2686	MANIFEST_TOOL=':'
2687	MKDIR_P='./install-sh -c -d'
2688	MOC=''
2689	NEED_GETOPT_LO_FALSE=''
2690	NEED_GETOPT_LO_TRUE=''
2691	NEED_INET_ATON_LO_FALSE=''
2692	NEED_INET_ATON_LO_TRUE=''
2693	NEED_INET_NTOP_LO_FALSE=''
2694	NEED_INET_NTOP_LO_TRUE=''
2695	NEED_INET_PTON_LO_FALSE=''
2696	NEED_INET_PTON_LO_TRUE=''
2697	NEED_STRNCASECMP_LO_FALSE=''
2698	NEED_STRNCASECMP_LO_TRUE=''
2699	NEED_STRPTIME_LO_FALSE=''
2700	NEED_STRPTIME_LO_TRUE=''
2701	NM='/usr/bin/nm'
2702	NMEDIT='nmedit'
2703	NSL_LIBS=''
2704	OBJDUMP='false'
2705	OBJEXT='o'
2706	OSX_APP_FLAGS=''
2707	OSX_MIN_VERSION=''
2708	OTOOL64=':'
2709	OTOOL='otool'
2710	PACKAGE='wireshark'
2711	PACKAGE_BUGREPORT='http://bugs.wireshark.org/'
2712	PACKAGE_NAME='wireshark'
2713	PACKAGE_STRING='wireshark 1.10.5'
2714	PACKAGE_TARNAME='wireshark'
2715	PACKAGE_URL='http://www.wireshark.org/'
2716	PACKAGE_VERSION='1.10.5'
2717	PATH_SEPARATOR=':'
2718	PCAP_CONFIG=''
2719	PCAP_LIBS=''
2720	PERL='/opt/local/bin/perl'
2721	PIE_CFLAGS=''
2722	PIE_LDFLAGS=''
2723	PKG_CONFIG='/opt/local/bin/pkg-config'
2724	PKG_CONFIG_LIBDIR=''
2725	PKG_CONFIG_PATH=''
2726	PLUGIN_LIBS=''
2727	POD2HTML='/opt/local/bin/pod2html'
2728	POD2MAN='/opt/local/bin/pod2man'
2729	PORTAUDIO_INCLUDES=''
2730	PORTAUDIO_LIBS=''
2731	PYTHON='/usr/bin/python'
2732	PY_CFLAGS=''
2733	PY_LIBS=''
2734	QT_MIN_VERSION=''
2735	Qt_LIBS=''
2736	RANLIB='ranlib'
2737	SED='/opt/local/bin/gsed'
2738	SETCAP=''
2739	SETCAP_INSTALL_FALSE=''
2740	SETCAP_INSTALL_TRUE=''
2741	SETUID_INSTALL_FALSE=''
2742	SETUID_INSTALL_TRUE=''
2743	SET_MAKE=''
2744	SHELL='/bin/sh'
2745	SOCKET_LIBS=''
2746	SSL_LIBS=''
2747	STRIP='strip'
2748	STRNCASECMP_LO=''
2749	STRPTIME_C=''
2750	STRPTIME_LO=''
2751	SYSTEMCONFIGURATION_FRAMEWORKS=''
2752	UIC=''
2753	USE_PROFILE_BUILD_FALSE=''
2754	USE_PROFILE_BUILD_TRUE=''
2755	VERSION='1.10.5'
2756	W3M=''
2757	XMLLINT=''
2758	XSLTPROC=''
2759	YACC='bison -y'
2760	YACCDUMMY='/opt/local/bin/bison'
2761	YFLAGS=''
2762	ac_ct_AR='ar'
2763	ac_ct_CC='/usr/bin/gcc-4.2'
2764	ac_ct_CXX=''
2765	ac_ct_DUMPBIN=''
2766	ac_cv_wireshark_have_rpm=''
2767	am__EXEEXT_FALSE=''
2768	am__EXEEXT_TRUE=''
2769	am__fastdepCC_FALSE='#'
2770	am__fastdepCC_TRUE=''
2771	am__fastdepCXX_FALSE='#'
2772	am__fastdepCXX_TRUE=''
2773	am__include='include'
2774	am__isrc=''
2775	am__leading_dot='.'
2776	am__nodep='_no'
2777	am__quote=''
2778	am__tar='tar --format=ustar -chf - "$$tardir"'
2779	am__untar='tar -xf -'
2780	bindir='${exec_prefix}/bin'
2781	build='x86_64-apple-darwin10.8.0'
2782	build_alias=''
2783	build_cpu='x86_64'
2784	build_os='darwin10.8.0'
2785	build_vendor='apple'
2786	capinfos_bin=''
2787	capinfos_man=''
2788	datadir='${datarootdir}'
2789	datarootdir='${prefix}/share'
2790	dftest_bin=''
2791	dftest_man=''
2792	docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
2793	dumpcap_bin=''
2794	dumpcap_man=''
2795	dvidir='${docdir}'
2796	editcap_bin=''
2797	editcap_man=''
2798	exec_prefix='NONE'
2799	host='x86_64-apple-darwin10.8.0'
2800	host_alias=''
2801	host_cpu='x86_64'
2802	host_os='darwin10.8.0'
2803	host_vendor='apple'
2804	htmldir='${docdir}'
2805	includedir='${prefix}/include'
2806	infodir='${prefix}/share/info'
2807	install_sh='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wireshark/wireshark/work/wireshark-1.10.5/install-sh'
2808	libdir='${exec_prefix}/lib'
2809	libexecdir='${exec_prefix}/libexec'
2810	localedir='${datarootdir}/locale'
2811	localstatedir='${prefix}/var'
2812	mandir='${prefix}/share/man'
2813	mergecap_bin=''
2814	mergecap_man=''
2815	mkdir_p='$(top_builddir)/./install-sh -c -d'
2816	oldincludedir='/usr/include'
2817	pdfdir='${docdir}'
2818	plugindir=''
2819	prefix='/opt/local'
2820	program_transform_name='s,x,x,'
2821	psdir='${docdir}'
2822	pythondir=''
2823	randpkt_bin=''
2824	randpkt_man=''
2825	rawshark_bin=''
2826	rawshark_man=''
2827	reordercap_bin=''
2828	reordercap_man=''
2829	sbindir='${exec_prefix}/sbin'
2830	sharedstatedir='${prefix}/com'
2831	sysconfdir='${prefix}/etc'
2832	target='x86_64-apple-darwin10.8.0'
2833	target_alias=''
2834	target_cpu='x86_64'
2835	target_os='darwin10.8.0'
2836	target_vendor='apple'
2837	text2pcap_bin=''
2838	text2pcap_man=''
2839	tshark_bin=''
2840	tshark_man=''
2841	wireshark_SUBDIRS=''
2842	wireshark_bin=''
2843	wireshark_man=''
2844	wiresharkfilter_man=''
2845
2846	## ----------- ##
2847	## confdefs.h. ##
2848	## ----------- ##
2849
2850	/* confdefs.h */
2851	#define PACKAGE_NAME "wireshark"
2852	#define PACKAGE_TARNAME "wireshark"
2853	#define PACKAGE_VERSION "1.10.5"
2854	#define PACKAGE_STRING "wireshark 1.10.5"
2855	#define PACKAGE_BUGREPORT "http://bugs.wireshark.org/"
2856	#define PACKAGE_URL "http://www.wireshark.org/"
2857	#define PACKAGE "wireshark"
2858	#define VERSION "1.10.5"
2859	#define VERSION_MAJOR 1
2860	#define VERSION_MINOR 10
2861	#define VERSION_MICRO 5
2862	#define STDC_HEADERS 1
2863	#define HAVE_SYS_TYPES_H 1
2864	#define HAVE_SYS_STAT_H 1
2865	#define HAVE_STDLIB_H 1
2866	#define HAVE_STRING_H 1
2867	#define HAVE_MEMORY_H 1
2868	#define HAVE_STRINGS_H 1
2869	#define HAVE_INTTYPES_H 1
2870	#define HAVE_STDINT_H 1
2871	#define HAVE_UNISTD_H 1
2872	#define HAVE_DLFCN_H 1
2873	#define LT_OBJDIR ".libs/"
2874	#define YYTEXT_POINTER 1
2875	#define HTML_VIEWER "mozilla"
2876
2877	configure: exit 1

Download in other formats:

Original Format