Ticket #42776: Portfile

# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id: $
PortSystem      1.0

name            hplip
version         3.14.3
revision        0
categories      graphics 
platforms       darwin macosx
homepage        http://hplipopensource.com
license         {GPL-2 MIT BSD}
maintainers johnfreed.com:okmacports
description printing, scanning, and faxing for HP inkjet and laser printers
long_description        HPLIP is an HP developed solution for printing, scanning, and faxing with HP inkjet and laser based printers
master_sites    sourceforge:project/hplip/hplip/${version}

checksums       rmd160  ebd307f9bf5831cbeac2b274f210aa8e2fc4e6b8 \
        sha256  1805b103639b51b9d908921e1e77db66c6e78b792aa51e405a5415e8e1c55e6e

patchfiles      patch-Makefile.am \
        patch-Makefile.in \
        patch-base_codes.py \
        patch-base_g.py \
        patch-base_utils.py \
        patch-check.py \
        patch-fax_backend_hpfax.py \
        patch-hplip.conf.in \
        patch-hplip.list.in \
        patch-installer_core-install.py \
        patch-installer_dcheck.py \
        patch-installer_distros.dat \
        patch-io_hpmud_files \
        patch-ip_hpip.h \
        patch-prnt_hpcups_files \
        patch-prnt_hpijs_context2.cpp \
        patch-prnt_hpijs_globals.cpp \
        patch-prnt_hpijs_ljzjscolor.cpp \
        patch-python \
        patch-ui4_devmgr5.py \
        patch-ui_devmgr4.py

depends_lib-append      port:libusb \
        port:jpeg \
        port:sane-backends \
        port:openssl \
        port:net-snmp \
        port:xorg-libpthread-stubs 

depends_run     bin:gs:espgs

variant python26 conflicts python27 python32 description {Use python 2.6} {
        depends_run-append      port:python26
        depends_lib-append      port:dbus-python26
}

variant python27 conflicts python26 python32 description {Use python 2.7} {
        depends_run-append      port:python27
        depends_lib-append      port:dbus-python27
}

variant python32 conflicts python26 python27 description {Use python 3.2} {
        depends_run-append      port:python32
        depends_lib-append      port:dbus-python32
}

set python_branch 0

if { [variant_isset python26] } {
        set python_branch 2.6
        set python_version 26
}

if { [variant_isset python27] } {
        set python_branch 2.7
        set python_version 27
}

if { [variant_isset python32] } {
        set python_branch 3.2
        set python_version 32
}

if { ${python_branch} == 0 } {
        default_variants +python27
        set python_branch 2.7
        set python_version 27
}

set python_prefix       ${frameworks_dir}/Python.framework/Versions/${python_branch}
set python_pkgd ${python_prefix}/lib/python${python_branch}/site-packages

configure.python        ${python_prefix}/bin/python${python_branch}

configure.env-append    PKG_CONFIG_LIBDIR=${prefix}/lib/pkgconfig PKG_CONFIG=${prefix}/pkg-config
configure.env-append    DBUS_LIBS='-L${prefix}/lib -ldbus-1' DBUS_CFLAGS='-I${prefix}/include/dbus-1.0 -I${prefix}/lib/dbus-1.0/include'
configure.cppflags-append       -I${python_prefix}/include
configure.cflags-append -DDESTDIR=${prefix} -DPYTHON_EXEC_PREFIX=${python_prefix}

configure.args  --disable-gui-build \
        --disable-qt4 \
        --with-cupsbackenddir=${prefix}/libexec/cups/backend \
        --with-cupsfilterdir=${prefix}/libexec/cups/filter \
        --with-icondir=${prefix}/share/applications \
        --with-docdir=${prefix}/share/doc/${name} \
        --with-htmldir=${prefix}/share/doc/${name} \
        --with-hpppddir=${prefix}/share/ppd/HP \
        --with-drvdir=${prefix}/share/cups/drv/hp \
        --docdir=${prefix}/share/doc/${name} \
        --htmldir=${prefix}/share/doc/${name} \
        --datadir=${python_pkgd} 

variant gui description {Build graphical interface}     {
        depends_lib-append port:py${python_version}-pyqt4
        configure.args-delete --disable-gui-build --disable-qt4 
                
        post-destroot {
                # need to use pythonw for PyQt scripts
                reinplace "s|/usr/bin/env python|/usr/bin/env pythonw|" \
                        ${destroot}${python_pkgd}/hplip/check.py\
                        ${destroot}${python_pkgd}/hplip/print.py\
                        ${destroot}${python_pkgd}/hplip/toolbox.py\
                        ${destroot}${python_pkgd}/hplip/fab.py\
                        ${destroot}${python_pkgd}/hplip/sendfax.py\
                        ${destroot}${python_pkgd}/hplip/unload.py
        }
}

post-patch {
        #don't hardcode $prefix 
        reinplace "s|@PREFIX@|${prefix}|" ${worksrcpath}/installer/dcheck.py \
                ${worksrcpath}/Makefile.am \
                ${worksrcpath}/Makefile.in \
                ${worksrcpath}/base/codes.py \
                ${worksrcpath}/base/g.py \
                ${worksrcpath}/check.py \
                ${worksrcpath}/fax/backend/hpfax.py \
                ${worksrcpath}/hplip.conf.in \
                ${worksrcpath}/hplip.list.in \
                ${worksrcpath}/installer/core_install.py \
                ${worksrcpath}/installer/distros.dat \
                ${worksrcpath}/prnt/hpijs/globals.cpp \
                ${worksrcpath}/ui4/devmgr5.py \
                ${worksrcpath}/ui/devmgr4.py

        #don't hardcode $python_prefix 
        reinplace "s|@PYTHON_PREFIX@|${python_prefix}|" ${worksrcpath}/installer/core_install.py

        # kludge because HFS is case insensitive for filenames
        file rename ${worksrcpath}/prnt/hpcups/Utils.h ${worksrcpath}/prnt/hpcups/HPCupsUtils.h
        file rename ${worksrcpath}/prnt/hpcups/Utils.cpp ${worksrcpath}/prnt/hpcups/HPCupsUtils.cpp
}


post-destroot   {       

        # Deleting fax drivers
        file delete ${destroot}/usr/share/cups/mime/pstotiff.convs
        file delete ${destroot}/usr/share/cups/mime/pstotiff.types

        # don't need these
        file delete ${destroot}/etc/xdg/autostart/hplip-systray.desktop
        file delete ${destroot}/usr/share/hal/fdi/preprobe/10osvendor/20-hplip-devices.fdi
        file delete ${destroot}/usr/share/applications/hplip.desktop
        file delete ${destroot}/usr/lib/systemd/system/hplip-printer@.service
        file delete ${destroot}/etc/udev/rules.d/56-hpmud.rules

        # delete dll.conf file, which HPLIP does wrong, and do it right
        file delete ${destroot}${prefix}/etc/sane.d/dll.conf
        file mkdir ${destroot}${prefix}/etc/sane.d/dll.d/
        file copy -force ${filespath}/hpaio ${destroot}${prefix}/etc/sane.d/dll.d/hpaio

        #install python modules into site-packages
        file copy ${worksrcpath}/.libs/cupsext.so ${destroot}${python_pkgd}/${name}/
        file copy ${worksrcpath}/.libs/hpmudext.so ${destroot}${python_pkgd}/${name}/
        file copy ${worksrcpath}/.libs/pcardext.so ${destroot}${python_pkgd}/${name}/
        file copy ${worksrcpath}/.libs/scanext.so ${destroot}${python_pkgd}/${name}/
}


notes "You will get the following error if you have not properly set up dbus:
Dynamic session lookup supported but failed: launchd did not provide a socket path, verify that org.freedesktop.dbus-session.plist is loaded!

To repair this, you must launch the dbus daemon systemwide:
sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist 

Then for EACH user who wants access, the user must launch the dbus agent:
launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist"