Context Navigation

Back to Ticket #43079

Ticket #43079: config.log

File config.log, 128.1 KB (added by lcr@…, 10 years ago)
a file referenced in error message in main.log

Line
1	This file contains any messages produced by compilers while
2	running configure, to aid debugging if configure makes a mistake.
3
4	It was created by gobject-introspection configure 1.38.0, which was
5	generated by GNU Autoconf 2.69. Invocation command line was
6
7	$ ./configure --prefix=/opt/local
8
9	## --------- ##
10	## Platform. ##
11	## --------- ##
12
13	hostname = CR-remote.local
14	uname -m = x86_64
15	uname -r = 13.1.0
16	uname -s = Darwin
17	uname -v = Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
18
19	/usr/bin/uname -p = i386
20	/bin/uname -X = unknown
21
22	/bin/arch = unknown
23	/usr/bin/arch -k = unknown
24	/usr/convex/getsysinfo = unknown
25	/usr/bin/hostinfo = Mach kernel version:
26	Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
27	Kernel configured for up to 4 processors.
28	4 processors are physically available.
29	4 processors are logically available.
30	Processor type: i486 (Intel 80486)
31	Processors active: 0 1 2 3
32	Primary memory available: 8.00 gigabytes
33	Default processor set: 324 tasks, 1412 threads, 4 processors
34	Load average: 4.07, Mach factor: 0.58
35	/bin/machine = unknown
36	/usr/bin/oslevel = unknown
37	/bin/universe = unknown
38
39	PATH: /opt/local/bin
40	PATH: /opt/local/sbin
41	PATH: /bin
42	PATH: /sbin
43	PATH: /usr/bin
44	PATH: /usr/sbin
45
46
47	## ----------- ##
48	## Core tests. ##
49	## ----------- ##
50
51	configure:2603: checking for a BSD-compatible install
52	configure:2671: result: /usr/bin/install -c
53	configure:2682: checking whether build environment is sane
54	configure:2737: result: yes
55	configure:2888: checking for a thread-safe mkdir -p
56	configure:2927: result: build-aux/install-sh -c -d
57	configure:2934: checking for gawk
58	configure:2964: result: no
59	configure:2934: checking for mawk
60	configure:2964: result: no
61	configure:2934: checking for nawk
62	configure:2964: result: no
63	configure:2934: checking for awk
64	configure:2950: found /usr/bin/awk
65	configure:2961: result: awk
66	configure:2972: checking whether make sets $(MAKE)
67	configure:2994: result: yes
68	configure:3023: checking whether make supports nested variables
69	configure:3040: result: yes
70	configure:3129: checking whether UID '503' is supported by ustar format
71	configure:3132: result: yes
72	configure:3139: checking whether GID '501' is supported by ustar format
73	configure:3142: result: yes
74	configure:3150: checking how to create a ustar tar archive
75	configure:3161: tar --version
76	bsdtar 2.8.3 - libarchive 2.8.3
77	configure:3164: $? = 0
78	configure:3204: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
79	configure:3207: $? = 0
80	configure:3211: tar -xf - <conftest.tar
81	configure:3214: $? = 0
82	configure:3216: cat conftest.dir/file
83	GrepMe
84	configure:3219: $? = 0
85	configure:3232: result: gnutar
86	configure:3241: checking whether to enable maintainer-specific portions of Makefiles
87	configure:3250: result: yes
88	configure:3275: checking whether make supports nested variables
89	configure:3292: result: yes
90	configure:3309: checking build system type
91	configure:3323: result: x86_64-apple-darwin13.1.0
92	configure:3343: checking host system type
93	configure:3356: result: x86_64-apple-darwin13.1.0
94	configure:3442: checking for gcc
95	configure:3469: result: /usr/bin/clang
96	configure:3698: checking for C compiler version
97	configure:3707: /usr/bin/clang --version >&5
98	Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
99	Target: x86_64-apple-darwin13.1.0
100	Thread model: posix
101	configure:3718: $? = 0
102	configure:3707: /usr/bin/clang -v >&5
103	Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
104	Target: x86_64-apple-darwin13.1.0
105	Thread model: posix
106	configure:3718: $? = 0
107	configure:3707: /usr/bin/clang -V >&5
108	clang: error: argument to '-V' is missing (expected 1 value)
109	clang: error: no input files
110	configure:3718: $? = 1
111	configure:3707: /usr/bin/clang -qversion >&5
112	clang: error: unknown argument: '-qversion' [-Wunused-command-line-argument-hard-error-in-future]
113	clang: note: this will be a hard error (cannot be downgraded to a warning) in the future
114	clang: error: no input files
115	configure:3718: $? = 1
116	configure:3738: checking whether the C compiler works
117	configure:3760: /usr/bin/clang -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c >&5
118	configure:3764: $? = 0
119	configure:3812: result: yes
120	configure:3815: checking for C compiler default output file name
121	configure:3817: result: a.out
122	configure:3823: checking for suffix of executables
123	configure:3830: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c >&5
124	configure:3834: $? = 0
125	configure:3856: result:
126	configure:3878: checking whether we are cross compiling
127	configure:3886: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c >&5
128	configure:3890: $? = 0
129	configure:3897: ./conftest
130	configure:3901: $? = 0
131	configure:3916: result: no
132	configure:3921: checking for suffix of object files
133	configure:3943: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
134	configure:3947: $? = 0
135	configure:3968: result: o
136	configure:3972: checking whether we are using the GNU C compiler
137	configure:3991: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
138	configure:3991: $? = 0
139	configure:4000: result: yes
140	configure:4009: checking whether /usr/bin/clang accepts -g
141	configure:4029: /usr/bin/clang -c -g -I/opt/local/include conftest.c >&5
142	configure:4029: $? = 0
143	configure:4070: result: yes
144	configure:4087: checking for /usr/bin/clang option to accept ISO C89
145	configure:4150: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
146	configure:4150: $? = 0
147	configure:4163: result: none needed
148	configure:4194: checking for style of include used by make
149	configure:4222: result: GNU
150	configure:4248: checking dependency style of /usr/bin/clang
151	configure:4359: result: gcc3
152	configure:4375: checking whether /usr/bin/clang and cc understand -c and -o together
153	configure:4406: /usr/bin/clang -c conftest.c -o conftest2.o >&5
154	configure:4410: $? = 0
155	configure:4416: /usr/bin/clang -c conftest.c -o conftest2.o >&5
156	configure:4420: $? = 0
157	configure:4431: cc -c conftest.c >&5
158	configure:4435: $? = 0
159	configure:4443: cc -c conftest.c -o conftest2.o >&5
160	configure:4447: $? = 0
161	configure:4453: cc -c conftest.c -o conftest2.o >&5
162	configure:4457: $? = 0
163	configure:4475: result: yes
164	configure:4550: checking how to print strings
165	configure:4577: result: printf
166	configure:4598: checking for a sed that does not truncate output
167	configure:4662: result: /usr/bin/sed
168	configure:4680: checking for grep that handles long lines and -e
169	configure:4738: result: /usr/bin/grep
170	configure:4743: checking for egrep
171	configure:4805: result: /usr/bin/grep -E
172	configure:4810: checking for fgrep
173	configure:4872: result: /usr/bin/grep -F
174	configure:4907: checking for ld used by /usr/bin/clang
175	configure:4974: result: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
176	configure:4981: checking if the linker (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld) is GNU ld
177	configure:4996: result: no
178	configure:5008: checking for BSD- or MS-compatible name lister (nm)
179	configure:5057: result: /usr/bin/nm
180	configure:5187: checking the name lister (/usr/bin/nm) interface
181	configure:5194: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
182	configure:5197: /usr/bin/nm "conftest.o"
183	configure:5200: output
184	0000000000000000 S _some_variable
185	configure:5207: result: BSD nm
186	configure:5210: checking whether ln -s works
187	configure:5214: result: yes
188	configure:5222: checking the maximum length of command line arguments
189	configure:5352: result: 196608
190	configure:5369: checking whether the shell understands some XSI constructs
191	configure:5379: result: yes
192	configure:5383: checking whether the shell understands "+="
193	configure:5389: result: yes
194	configure:5424: checking how to convert x86_64-apple-darwin13.1.0 file names to x86_64-apple-darwin13.1.0 format
195	configure:5464: result: func_convert_file_noop
196	configure:5471: checking how to convert x86_64-apple-darwin13.1.0 file names to toolchain format
197	configure:5491: result: func_convert_file_noop
198	configure:5498: checking for /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld option to reload object files
199	configure:5505: result: -r
200	configure:5579: checking for objdump
201	configure:5609: result: no
202	configure:5638: checking how to recognize dependent libraries
203	configure:5840: result: pass_all
204	configure:5925: checking for dlltool
205	configure:5955: result: no
206	configure:5985: checking how to associate runtime and link libraries
207	configure:6012: result: printf %s\n
208	configure:6073: checking for ar
209	configure:6089: found /usr/bin/ar
210	configure:6100: result: ar
211	configure:6137: checking for archiver @FILE support
212	configure:6154: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
213	configure:6154: $? = 0
214	configure:6157: ar cru libconftest.a @conftest.lst >&5
215	ar: @conftest.lst: No such file or directory
216	configure:6160: $? = 1
217	configure:6180: result: no
218	configure:6238: checking for strip
219	configure:6254: found /usr/bin/strip
220	configure:6265: result: strip
221	configure:6337: checking for ranlib
222	configure:6353: found /usr/bin/ranlib
223	configure:6364: result: ranlib
224	configure:6466: checking command to parse /usr/bin/nm output from /usr/bin/clang object
225	configure:6586: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
226	configure:6589: $? = 0
227	configure:6593: /usr/bin/nm conftest.o \\| sed -n -e 's/^.[ ]$[BCDEGRST][BCDEGRST]$[ ][ ]$[_A-Za-z][_A-Za-z0-9]$$/\1 \2 \2/p' \| sed '/ __gnu_lto/d' \> conftest.nm
228	configure:6596: $? = 0
229	cannot find nm_test_var in conftest.nm
230	configure:6586: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
231	configure:6589: $? = 0
232	configure:6593: /usr/bin/nm conftest.o \\| sed -n -e 's/^.[ ]$[BCDEGRST][BCDEGRST]$[ ][ ]_$[_A-Za-z][_A-Za-z0-9]$$/\1 _\2 \2/p' \| sed '/ __gnu_lto/d' \> conftest.nm
233	configure:6596: $? = 0
234	configure:6662: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c conftstm.o >&5
235	configure:6665: $? = 0
236	configure:6703: result: ok
237	configure:6740: checking for sysroot
238	configure:6770: result: no
239	configure:7026: checking for mt
240	configure:7056: result: no
241	configure:7076: checking if : is a manifest tool
242	configure:7082: : '-?'
243	configure:7090: result: no
244	configure:7146: checking for dsymutil
245	configure:7162: found /usr/bin/dsymutil
246	configure:7173: result: dsymutil
247	configure:7238: checking for nmedit
248	configure:7254: found /usr/bin/nmedit
249	configure:7265: result: nmedit
250	configure:7330: checking for lipo
251	configure:7346: found /usr/bin/lipo
252	configure:7357: result: lipo
253	configure:7422: checking for otool
254	configure:7438: found /usr/bin/otool
255	configure:7449: result: otool
256	configure:7514: checking for otool64
257	configure:7544: result: no
258	configure:7589: checking for -single_module linker flag
259	/usr/bin/clang -pipe -Os -arch x86_64 -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 -o libconftest.dylib -dynamiclib -Wl,-single_module conftest.c
260	configure:7622: result: yes
261	configure:7625: checking for -exported_symbols_list linker flag
262	configure:7645: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 -Wl,-exported_symbols_list,conftest.sym conftest.c >&5
263	configure:7645: $? = 0
264	configure:7655: result: yes
265	configure:7658: checking for -force_load linker flag
266	/usr/bin/clang -pipe -Os -arch x86_64 -c -o conftest.o conftest.c
267	ar cru libconftest.a conftest.o
268	ranlib libconftest.a
269	/usr/bin/clang -pipe -Os -arch x86_64 -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 -o conftest conftest.c -Wl,-force_load,./libconftest.a
270	configure:7690: result: yes
271	configure:7732: checking how to run the C preprocessor
272	configure:7763: /usr/bin/clang -E -I/opt/local/include conftest.c
273	configure:7763: $? = 0
274	configure:7777: /usr/bin/clang -E -I/opt/local/include conftest.c
275	conftest.c:11:10: fatal error: 'ac_nonexistent.h' file not found
276	#include <ac_nonexistent.h>
277	^
278	1 error generated.
279	configure:7777: $? = 1
280	configure: failed program was:
281	\| /* confdefs.h */
282	\| #define PACKAGE_NAME "gobject-introspection"
283	\| #define PACKAGE_TARNAME "gobject-introspection"
284	\| #define PACKAGE_VERSION "1.38.0"
285	\| #define PACKAGE_STRING "gobject-introspection 1.38.0"
286	\| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection"
287	\| #define PACKAGE_URL ""
288	\| #define PACKAGE "gobject-introspection"
289	\| #define VERSION "1.38.0"
290	\| /* end confdefs.h. */
291	\| #include <ac_nonexistent.h>
292	configure:7802: result: /usr/bin/clang -E
293	configure:7822: /usr/bin/clang -E -I/opt/local/include conftest.c
294	configure:7822: $? = 0
295	configure:7836: /usr/bin/clang -E -I/opt/local/include conftest.c
296	conftest.c:11:10: fatal error: 'ac_nonexistent.h' file not found
297	#include <ac_nonexistent.h>
298	^
299	1 error generated.
300	configure:7836: $? = 1
301	configure: failed program was:
302	\| /* confdefs.h */
303	\| #define PACKAGE_NAME "gobject-introspection"
304	\| #define PACKAGE_TARNAME "gobject-introspection"
305	\| #define PACKAGE_VERSION "1.38.0"
306	\| #define PACKAGE_STRING "gobject-introspection 1.38.0"
307	\| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection"
308	\| #define PACKAGE_URL ""
309	\| #define PACKAGE "gobject-introspection"
310	\| #define VERSION "1.38.0"
311	\| /* end confdefs.h. */
312	\| #include <ac_nonexistent.h>
313	configure:7865: checking for ANSI C header files
314	configure:7885: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
315	configure:7885: $? = 0
316	configure:7958: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c >&5
317	configure:7958: $? = 0
318	configure:7958: ./conftest
319	configure:7958: $? = 0
320	configure:7969: result: yes
321	configure:7982: checking for sys/types.h
322	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
323	configure:7982: $? = 0
324	configure:7982: result: yes
325	configure:7982: checking for sys/stat.h
326	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
327	configure:7982: $? = 0
328	configure:7982: result: yes
329	configure:7982: checking for stdlib.h
330	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
331	configure:7982: $? = 0
332	configure:7982: result: yes
333	configure:7982: checking for string.h
334	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
335	configure:7982: $? = 0
336	configure:7982: result: yes
337	configure:7982: checking for memory.h
338	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
339	configure:7982: $? = 0
340	configure:7982: result: yes
341	configure:7982: checking for strings.h
342	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
343	configure:7982: $? = 0
344	configure:7982: result: yes
345	configure:7982: checking for inttypes.h
346	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
347	configure:7982: $? = 0
348	configure:7982: result: yes
349	configure:7982: checking for stdint.h
350	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
351	configure:7982: $? = 0
352	configure:7982: result: yes
353	configure:7982: checking for unistd.h
354	configure:7982: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
355	configure:7982: $? = 0
356	configure:7982: result: yes
357	configure:7996: checking for dlfcn.h
358	configure:7996: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include conftest.c >&5
359	configure:7996: $? = 0
360	configure:7996: result: yes
361	configure:8202: checking for objdir
362	configure:8217: result: .libs
363	configure:8488: checking if /usr/bin/clang supports -fno-rtti -fno-exceptions
364	configure:8506: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include -fno-rtti -fno-exceptions conftest.c >&5
365	configure:8510: $? = 0
366	configure:8523: result: yes
367	configure:8850: checking for /usr/bin/clang option to produce PIC
368	configure:8857: result: -fno-common -DPIC
369	configure:8865: checking if /usr/bin/clang PIC flag -fno-common -DPIC works
370	configure:8883: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include -fno-common -DPIC -DPIC conftest.c >&5
371	configure:8887: $? = 0
372	configure:8900: result: yes
373	configure:8929: checking if /usr/bin/clang static flag -static works
374	configure:8957: result: no
375	configure:8972: checking if /usr/bin/clang supports -c -o file.o
376	configure:8993: /usr/bin/clang -c -pipe -Os -arch x86_64 -I/opt/local/include -o out/conftest2.o conftest.c >&5
377	configure:8997: $? = 0
378	configure:9019: result: yes
379	configure:9027: checking if /usr/bin/clang supports -c -o file.o
380	configure:9074: result: yes
381	configure:9107: checking whether the /usr/bin/clang linker (/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld) supports shared libraries
382	configure:10260: result: yes
383	configure:10500: checking dynamic linker characteristics
384	configure:11237: result: darwin13.1.0 dyld
385	configure:11344: checking how to hardcode library paths into programs
386	configure:11369: result: immediate
387	configure:11909: checking whether stripping libraries is possible
388	configure:11923: result: yes
389	configure:11949: checking if libtool supports shared libraries
390	configure:11951: result: yes
391	configure:11954: checking whether to build shared libraries
392	configure:11975: result: yes
393	configure:11978: checking whether to build static libraries
394	configure:11982: result: yes
395	configure:12074: checking for pkg-config
396	configure:12092: found /opt/local/bin/pkg-config
397	configure:12104: result: /opt/local/bin/pkg-config
398	configure:12129: checking pkg-config is at least version 0.9.0
399	configure:12132: result: yes
400	configure:12145: checking for flex
401	configure:12161: found /usr/bin/flex
402	configure:12172: result: flex
403	configure:12210: flex conftest.l
404	configure:12214: $? = 0
405	configure:12216: checking lex output file root
406	configure:12230: result: lex.yy
407	configure:12235: checking lex library
408	configure:12249: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c >&5
409	Undefined symbols for architecture x86_64:
410	"_yywrap", referenced from:
411	_yylex in conftest-475df8.o
412	_main in conftest-475df8.o
413	ld: symbol(s) not found for architecture x86_64
414	clang: error: linker command failed with exit code 1 (use -v to see invocation)
415	configure:12249: $? = 1
416	configure: failed program was:
417	\| /* confdefs.h */
418	\| #define PACKAGE_NAME "gobject-introspection"
419	\| #define PACKAGE_TARNAME "gobject-introspection"
420	\| #define PACKAGE_VERSION "1.38.0"
421	\| #define PACKAGE_STRING "gobject-introspection 1.38.0"
422	\| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection"
423	\| #define PACKAGE_URL ""
424	\| #define PACKAGE "gobject-introspection"
425	\| #define VERSION "1.38.0"
426	\| #define STDC_HEADERS 1
427	\| #define HAVE_SYS_TYPES_H 1
428	\| #define HAVE_SYS_STAT_H 1
429	\| #define HAVE_STDLIB_H 1
430	\| #define HAVE_STRING_H 1
431	\| #define HAVE_MEMORY_H 1
432	\| #define HAVE_STRINGS_H 1
433	\| #define HAVE_INTTYPES_H 1
434	\| #define HAVE_STDINT_H 1
435	\| #define HAVE_UNISTD_H 1
436	\| #define HAVE_DLFCN_H 1
437	\| #define LT_OBJDIR ".libs/"
438	\| /* end confdefs.h. */
439	\|
440	\| #line 3 "lex.yy.c"
441	\|
442	\| #define YY_INT_ALIGNED short int
443	\|
444	\| /* A lexical scanner generated by flex */
445	\|
446	\| #define FLEX_SCANNER
447	\| #define YY_FLEX_MAJOR_VERSION 2
448	\| #define YY_FLEX_MINOR_VERSION 5
449	\| #define YY_FLEX_SUBMINOR_VERSION 35
450	\| #if YY_FLEX_SUBMINOR_VERSION > 0
451	\| #define FLEX_BETA
452	\| #endif
453	\|
454	\| /* First, we deal with platform-specific or compiler-specific issues. */
455	\|
456	\| /* begin standard C headers. */
457	\| #include <stdio.h>
458	\| #include <string.h>
459	\| #include <errno.h>
460	\| #include <stdlib.h>
461	\|
462	\| /* end standard C headers. */
463	\|
464	\| /* flex integer type definitions */
465	\|
466	\| #ifndef FLEXINT_H
467	\| #define FLEXINT_H
468	\|
469	\| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
470	\|
471	\| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
472	\|
473	\| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
474	\| * if you want the limit (max/min) macros for int types.
475	\| */
476	\| #ifndef __STDC_LIMIT_MACROS
477	\| #define __STDC_LIMIT_MACROS 1
478	\| #endif
479	\|
480	\| #include <inttypes.h>
481	\| typedef int8_t flex_int8_t;
482	\| typedef uint8_t flex_uint8_t;
483	\| typedef int16_t flex_int16_t;
484	\| typedef uint16_t flex_uint16_t;
485	\| typedef int32_t flex_int32_t;
486	\| typedef uint32_t flex_uint32_t;
487	\| typedef uint64_t flex_uint64_t;
488	\| #else
489	\| typedef signed char flex_int8_t;
490	\| typedef short int flex_int16_t;
491	\| typedef int flex_int32_t;
492	\| typedef unsigned char flex_uint8_t;
493	\| typedef unsigned short int flex_uint16_t;
494	\| typedef unsigned int flex_uint32_t;
495	\| #endif /* ! C99 */
496	\|
497	\| /* Limits of integral types. */
498	\| #ifndef INT8_MIN
499	\| #define INT8_MIN (-128)
500	\| #endif
501	\| #ifndef INT16_MIN
502	\| #define INT16_MIN (-32767-1)
503	\| #endif
504	\| #ifndef INT32_MIN
505	\| #define INT32_MIN (-2147483647-1)
506	\| #endif
507	\| #ifndef INT8_MAX
508	\| #define INT8_MAX (127)
509	\| #endif
510	\| #ifndef INT16_MAX
511	\| #define INT16_MAX (32767)
512	\| #endif
513	\| #ifndef INT32_MAX
514	\| #define INT32_MAX (2147483647)
515	\| #endif
516	\| #ifndef UINT8_MAX
517	\| #define UINT8_MAX (255U)
518	\| #endif
519	\| #ifndef UINT16_MAX
520	\| #define UINT16_MAX (65535U)
521	\| #endif
522	\| #ifndef UINT32_MAX
523	\| #define UINT32_MAX (4294967295U)
524	\| #endif
525	\|
526	\| #endif /* ! FLEXINT_H */
527	\|
528	\| #ifdef __cplusplus
529	\|
530	\| /* The "const" storage-class-modifier is valid. */
531	\| #define YY_USE_CONST
532	\|
533	\| #else /* ! __cplusplus */
534	\|
535	\| /* C99 requires __STDC__ to be defined as 1. */
536	\| #if defined (__STDC__)
537	\|
538	\| #define YY_USE_CONST
539	\|
540	\| #endif /* defined (__STDC__) */
541	\| #endif /* ! __cplusplus */
542	\|
543	\| #ifdef YY_USE_CONST
544	\| #define yyconst const
545	\| #else
546	\| #define yyconst
547	\| #endif
548	\|
549	\| /* Returned upon end-of-file. */
550	\| #define YY_NULL 0
551	\|
552	\| /* Promotes a possibly negative, possibly signed char to an unsigned
553	\| * integer for use as an array index. If the signed char is negative,
554	\| * we want to instead treat it as an 8-bit unsigned char, hence the
555	\| * double cast.
556	\| */
557	\| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
558	\|
559	\| /* Enter a start condition. This macro really ought to take a parameter,
560	\| * but we do it the disgusting crufty way forced on us by the ()-less
561	\| * definition of BEGIN.
562	\| */
563	\| #define BEGIN (yy_start) = 1 + 2 *
564	\|
565	\| /* Translate the current start state into a value that can be later handed
566	\| * to BEGIN to return to the state. The YYSTATE alias is for lex
567	\| * compatibility.
568	\| */
569	\| #define YY_START (((yy_start) - 1) / 2)
570	\| #define YYSTATE YY_START
571	\|
572	\| /* Action number for EOF rule of a given start state. */
573	\| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
574	\|
575	\| /* Special action meaning "start processing a new file". */
576	\| #define YY_NEW_FILE yyrestart(yyin )
577	\|
578	\| #define YY_END_OF_BUFFER_CHAR 0
579	\|
580	\| /* Size of default input buffer. */
581	\| #ifndef YY_BUF_SIZE
582	\| #define YY_BUF_SIZE 16384
583	\| #endif
584	\|
585	\| /* The state buf must be large enough to hold one state per character in the main buffer.
586	\| */
587	\| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
588	\|
589	\| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
590	\| #define YY_TYPEDEF_YY_BUFFER_STATE
591	\| typedef struct yy_buffer_state *YY_BUFFER_STATE;
592	\| #endif
593	\|
594	\| #ifndef YY_TYPEDEF_YY_SIZE_T
595	\| #define YY_TYPEDEF_YY_SIZE_T
596	\| typedef size_t yy_size_t;
597	\| #endif
598	\|
599	\| extern yy_size_t yyleng;
600	\|
601	\| extern FILE yyin, yyout;
602	\|
603	\| #define EOB_ACT_CONTINUE_SCAN 0
604	\| #define EOB_ACT_END_OF_FILE 1
605	\| #define EOB_ACT_LAST_MATCH 2
606	\|
607	\| #define YY_LESS_LINENO(n)
608	\|
609	\| /* Return all but the first "n" matched characters back to the input stream. */
610	\| #define yyless(n) \
611	\| do \
612	\| { \
613	\| /* Undo effects of setting up yytext. */ \
614	\| int yyless_macro_arg = (n); \
615	\| YY_LESS_LINENO(yyless_macro_arg);\
616	\| *yy_cp = (yy_hold_char); \
617	\| YY_RESTORE_YY_MORE_OFFSET \
618	\| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
619	\| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
620	\| } \
621	\| while ( 0 )
622	\|
623	\| #define unput(c) yyunput( c, (yytext_ptr) )
624	\|
625	\| #ifndef YY_STRUCT_YY_BUFFER_STATE
626	\| #define YY_STRUCT_YY_BUFFER_STATE
627	\| struct yy_buffer_state
628	\| {
629	\| FILE *yy_input_file;
630	\|
631	\| char yy_ch_buf; / input buffer */
632	\| char yy_buf_pos; / current position in input buffer */
633	\|
634	\| /* Size of input buffer in bytes, not including room for EOB
635	\| * characters.
636	\| */
637	\| yy_size_t yy_buf_size;
638	\|
639	\| /* Number of characters read into yy_ch_buf, not including EOB
640	\| * characters.
641	\| */
642	\| yy_size_t yy_n_chars;
643	\|
644	\| /* Whether we "own" the buffer - i.e., we know we created it,
645	\| * and can realloc() it to grow it, and should free() it to
646	\| * delete it.
647	\| */
648	\| int yy_is_our_buffer;
649	\|
650	\| /* Whether this is an "interactive" input source; if so, and
651	\| * if we're using stdio for input, then we want to use getc()
652	\| * instead of fread(), to make sure we stop fetching input after
653	\| * each newline.
654	\| */
655	\| int yy_is_interactive;
656	\|
657	\| /* Whether we're considered to be at the beginning of a line.
658	\| * If so, '^' rules will be active on the next match, otherwise
659	\| * not.
660	\| */
661	\| int yy_at_bol;
662	\|
663	\| int yy_bs_lineno; /*< The line count. /
664	\| int yy_bs_column; /*< The column count. /
665	\|
666	\| /* Whether to try to fill the input buffer when we reach the
667	\| * end of it.
668	\| */
669	\| int yy_fill_buffer;
670	\|
671	\| int yy_buffer_status;
672	\|
673	\| #define YY_BUFFER_NEW 0
674	\| #define YY_BUFFER_NORMAL 1
675	\| /* When an EOF's been seen but there's still some text to process
676	\| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
677	\| * shouldn't try reading from the input source any more. We might
678	\| * still have a bunch of tokens to match, though, because of
679	\| * possible backing-up.
680	\| *
681	\| * When we actually see the EOF, we change the status to "new"
682	\| * (via yyrestart()), so that the user can continue scanning by
683	\| * just pointing yyin at a new input file.
684	\| */
685	\| #define YY_BUFFER_EOF_PENDING 2
686	\|
687	\| };
688	\| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
689	\|
690	\| /* Stack of input buffers. */
691	\| static size_t yy_buffer_stack_top = 0; /*< index of top of stack. /
692	\| static size_t yy_buffer_stack_max = 0; /*< capacity of stack. /
693	\| static YY_BUFFER_STATE * yy_buffer_stack = 0; /*< Stack as an array. /
694	\|
695	\| /* We provide macros for accessing buffer states in case in the
696	\| * future we want to put the buffer states in a more general
697	\| * "scanner state".
698	\| *
699	\| * Returns the top of the stack, or NULL.
700	\| */
701	\| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
702	\| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
703	\| : NULL)
704	\|
705	\| /* Same as previous macro, but useful when we know that the buffer stack is not
706	\| * NULL or when we need an lvalue. For internal use only.
707	\| */
708	\| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
709	\|
710	\| /* yy_hold_char holds the character lost when yytext is formed. */
711	\| static char yy_hold_char;
712	\| static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */
713	\| yy_size_t yyleng;
714	\|
715	\| /* Points to current character in buffer. */
716	\| static char yy_c_buf_p = (char ) 0;
717	\| static int yy_init = 0; /* whether we need to initialize */
718	\| static int yy_start = 0; /* start state number */
719	\|
720	\| /* Flag which is used to allow yywrap()'s to do buffer switches
721	\| * instead of setting up a fresh yyin. A bit of a hack ...
722	\| */
723	\| static int yy_did_buffer_switch_on_eof;
724	\|
725	\| void yyrestart (FILE *input_file );
726	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
727	\| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
728	\| void yy_delete_buffer (YY_BUFFER_STATE b );
729	\| void yy_flush_buffer (YY_BUFFER_STATE b );
730	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
731	\| void yypop_buffer_state (void );
732	\|
733	\| static void yyensure_buffer_stack (void );
734	\| static void yy_load_buffer_state (void );
735	\| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
736	\|
737	\| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
738	\|
739	\| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
740	\| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
741	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len );
742	\|
743	\| void *yyalloc (yy_size_t );
744	\| void yyrealloc (void ,yy_size_t );
745	\| void yyfree (void * );
746	\|
747	\| #define yy_new_buffer yy_create_buffer
748	\|
749	\| #define yy_set_interactive(is_interactive) \
750	\| { \
751	\| if ( ! YY_CURRENT_BUFFER ){ \
752	\| yyensure_buffer_stack (); \
753	\| YY_CURRENT_BUFFER_LVALUE = \
754	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
755	\| } \
756	\| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
757	\| }
758	\|
759	\| #define yy_set_bol(at_bol) \
760	\| { \
761	\| if ( ! YY_CURRENT_BUFFER ){\
762	\| yyensure_buffer_stack (); \
763	\| YY_CURRENT_BUFFER_LVALUE = \
764	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
765	\| } \
766	\| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
767	\| }
768	\|
769	\| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
770	\|
771	\| /* Begin user sect3 */
772	\|
773	\| typedef unsigned char YY_CHAR;
774	\|
775	\| FILE yyin = (FILE ) 0, yyout = (FILE ) 0;
776	\|
777	\| typedef int yy_state_type;
778	\|
779	\| extern int yylineno;
780	\|
781	\| int yylineno = 1;
782	\|
783	\| extern char *yytext;
784	\| #define yytext_ptr yytext
785	\|
786	\| static yy_state_type yy_get_previous_state (void );
787	\| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
788	\| static int yy_get_next_buffer (void );
789	\| static void yy_fatal_error (yyconst char msg[] );
790	\|
791	\| /* Done after the current pattern has been matched and before the
792	\| * corresponding action - sets up yytext.
793	\| */
794	\| #define YY_DO_BEFORE_ACTION \
795	\| (yytext_ptr) = yy_bp; \
796	\| (yytext_ptr) -= (yy_more_len); \
797	\| yyleng = (yy_size_t) (yy_cp - (yytext_ptr)); \
798	\| (yy_hold_char) = *yy_cp; \
799	\| *yy_cp = '\0'; \
800	\| (yy_c_buf_p) = yy_cp;
801	\|
802	\| #define YY_NUM_RULES 8
803	\| #define YY_END_OF_BUFFER 9
804	\| /* This struct is not used in this scanner,
805	\| but its presence is necessary. */
806	\| struct yy_trans_info
807	\| {
808	\| flex_int32_t yy_verify;
809	\| flex_int32_t yy_nxt;
810	\| };
811	\| static yyconst flex_int16_t yy_acclist[23] =
812	\| { 0,
813	\| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
814	\| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
815	\| 7, 8
816	\| } ;
817	\|
818	\| static yyconst flex_int16_t yy_accept[14] =
819	\| { 0,
820	\| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
821	\| 20, 23, 23
822	\| } ;
823	\|
824	\| static yyconst flex_int32_t yy_ec[256] =
825	\| { 0,
826	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
827	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
828	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
829	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
830	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
831	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
832	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
833	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
834	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
835	\| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
836	\|
837	\| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
838	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
839	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
840	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
841	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
842	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
843	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
844	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
845	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
846	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
847	\|
848	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
849	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
850	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
851	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
852	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
853	\| 1, 1, 1, 1, 1
854	\| } ;
855	\|
856	\| static yyconst flex_int32_t yy_meta[9] =
857	\| { 0,
858	\| 1, 1, 1, 1, 1, 1, 1, 1
859	\| } ;
860	\|
861	\| static yyconst flex_int16_t yy_base[13] =
862	\| { 0,
863	\| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
864	\| 10, 10
865	\| } ;
866	\|
867	\| static yyconst flex_int16_t yy_def[13] =
868	\| { 0,
869	\| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
870	\| 12, 0
871	\| } ;
872	\|
873	\| static yyconst flex_int16_t yy_nxt[19] =
874	\| { 0,
875	\| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
876	\| 12, 12, 12, 12, 12, 12, 12, 12
877	\| } ;
878	\|
879	\| static yyconst flex_int16_t yy_chk[19] =
880	\| { 0,
881	\| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
882	\| 12, 12, 12, 12, 12, 12, 12, 12
883	\| } ;
884	\|
885	\| extern int yy_flex_debug;
886	\| int yy_flex_debug = 0;
887	\|
888	\| static yy_state_type yy_state_buf=0, yy_state_ptr=0;
889	\| static char *yy_full_match;
890	\| static int yy_lp;
891	\| #define REJECT \
892	\| { \
893	\| yy_cp = (yy_hold_char); / undo effects of setting up yytext */ \
894	\| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
895	\| ++(yy_lp); \
896	\| goto find_rule; \
897	\| }
898	\|
899	\| static int yy_more_flag = 0;
900	\| static int yy_more_len = 0;
901	\| #define yymore() ((yy_more_flag) = 1)
902	\| #define YY_MORE_ADJ (yy_more_len)
903	\| #define YY_RESTORE_YY_MORE_OFFSET
904	\| char *yytext;
905	\| #line 1 "conftest.l"
906	\| #line 469 "lex.yy.c"
907	\|
908	\| #define INITIAL 0
909	\|
910	\| #ifndef YY_NO_UNISTD_H
911	\| /* Special case for "unistd.h", since it is non-ANSI. We include it way
912	\| * down here because we want the user's section 1 to have been scanned first.
913	\| * The user has a chance to override it with an option.
914	\| */
915	\| #include <unistd.h>
916	\| #endif
917	\|
918	\| #ifndef YY_EXTRA_TYPE
919	\| #define YY_EXTRA_TYPE void *
920	\| #endif
921	\|
922	\| static int yy_init_globals (void );
923	\|
924	\| /* Accessor methods to globals.
925	\| These are made visible to non-reentrant scanners for convenience. */
926	\|
927	\| int yylex_destroy (void );
928	\|
929	\| int yyget_debug (void );
930	\|
931	\| void yyset_debug (int debug_flag );
932	\|
933	\| YY_EXTRA_TYPE yyget_extra (void );
934	\|
935	\| void yyset_extra (YY_EXTRA_TYPE user_defined );
936	\|
937	\| FILE *yyget_in (void );
938	\|
939	\| void yyset_in (FILE * in_str );
940	\|
941	\| FILE *yyget_out (void );
942	\|
943	\| void yyset_out (FILE * out_str );
944	\|
945	\| yy_size_t yyget_leng (void );
946	\|
947	\| char *yyget_text (void );
948	\|
949	\| int yyget_lineno (void );
950	\|
951	\| void yyset_lineno (int line_number );
952	\|
953	\| /* Macros after this point can all be overridden by user definitions in
954	\| * section 1.
955	\| */
956	\|
957	\| #ifndef YY_SKIP_YYWRAP
958	\| #ifdef __cplusplus
959	\| extern "C" int yywrap (void );
960	\| #else
961	\| extern int yywrap (void );
962	\| #endif
963	\| #endif
964	\|
965	\| static void yyunput (int c,char *buf_ptr );
966	\|
967	\| #ifndef yytext_ptr
968	\| static void yy_flex_strncpy (char ,yyconst char ,int );
969	\| #endif
970	\|
971	\| #ifdef YY_NEED_STRLEN
972	\| static int yy_flex_strlen (yyconst char * );
973	\| #endif
974	\|
975	\| #ifndef YY_NO_INPUT
976	\|
977	\| #ifdef __cplusplus
978	\| static int yyinput (void );
979	\| #else
980	\| static int input (void );
981	\| #endif
982	\|
983	\| #endif
984	\|
985	\| /* Amount of stuff to slurp up with each read. */
986	\| #ifndef YY_READ_BUF_SIZE
987	\| #define YY_READ_BUF_SIZE 8192
988	\| #endif
989	\|
990	\| /* Copy whatever the last rule matched to the standard output. */
991	\| #ifndef ECHO
992	\| /* This used to be an fputs(), but since the string might contain NUL's,
993	\| * we now use fwrite().
994	\| */
995	\| #define ECHO fwrite( yytext, yyleng, 1, yyout )
996	\| #endif
997	\|
998	\| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
999	\| * is returned in "result".
1000	\| */
1001	\| #ifndef YY_INPUT
1002	\| #define YY_INPUT(buf,result,max_size) \
1003	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
1004	\| { \
1005	\| int c = '*'; \
1006	\| yy_size_t n; \
1007	\| for ( n = 0; n < max_size && \
1008	\| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
1009	\| buf[n] = (char) c; \
1010	\| if ( c == '\n' ) \
1011	\| buf[n++] = (char) c; \
1012	\| if ( c == EOF && ferror( yyin ) ) \
1013	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
1014	\| result = n; \
1015	\| } \
1016	\| else \
1017	\| { \
1018	\| errno=0; \
1019	\| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
1020	\| { \
1021	\| if( errno != EINTR) \
1022	\| { \
1023	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
1024	\| break; \
1025	\| } \
1026	\| errno=0; \
1027	\| clearerr(yyin); \
1028	\| } \
1029	\| }\
1030	\| \
1031	\|
1032	\| #endif
1033	\|
1034	\| /* No semi-colon after return; correct usage is to write "yyterminate();" -
1035	\| * we don't want an extra ';' after the "return" because that will cause
1036	\| * some compilers to complain about unreachable statements.
1037	\| */
1038	\| #ifndef yyterminate
1039	\| #define yyterminate() return YY_NULL
1040	\| #endif
1041	\|
1042	\| /* Number of entries by which start-condition stack grows. */
1043	\| #ifndef YY_START_STACK_INCR
1044	\| #define YY_START_STACK_INCR 25
1045	\| #endif
1046	\|
1047	\| /* Report a fatal error. */
1048	\| #ifndef YY_FATAL_ERROR
1049	\| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
1050	\| #endif
1051	\|
1052	\| /* end tables serialization structures and prototypes */
1053	\|
1054	\| /* Default declaration of generated scanner - a define so the user can
1055	\| * easily add parameters.
1056	\| */
1057	\| #ifndef YY_DECL
1058	\| #define YY_DECL_IS_OURS 1
1059	\|
1060	\| extern int yylex (void);
1061	\|
1062	\| #define YY_DECL int yylex (void)
1063	\| #endif /* !YY_DECL */
1064	\|
1065	\| /* Code executed at the beginning of each rule, after yytext and yyleng
1066	\| * have been set up.
1067	\| */
1068	\| #ifndef YY_USER_ACTION
1069	\| #define YY_USER_ACTION
1070	\| #endif
1071	\|
1072	\| /* Code executed at the end of each rule. */
1073	\| #ifndef YY_BREAK
1074	\| #define YY_BREAK break;
1075	\| #endif
1076	\|
1077	\| #define YY_RULE_SETUP \
1078	\| YY_USER_ACTION
1079	\|
1080	\| /** The main scanner function which does all the work.
1081	\| */
1082	\| YY_DECL
1083	\| {
1084	\| register yy_state_type yy_current_state;
1085	\| register char yy_cp, yy_bp;
1086	\| register int yy_act;
1087	\|
1088	\| #line 1 "conftest.l"
1089	\|
1090	\| #line 653 "lex.yy.c"
1091	\|
1092	\| if ( !(yy_init) )
1093	\| {
1094	\| (yy_init) = 1;
1095	\|
1096	\| #ifdef YY_USER_INIT
1097	\| YY_USER_INIT;
1098	\| #endif
1099	\|
1100	\| /* Create the reject buffer large enough to save one state per allowed character. */
1101	\| if ( ! (yy_state_buf) )
1102	\| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
1103	\| if ( ! (yy_state_buf) )
1104	\| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
1105	\|
1106	\| if ( ! (yy_start) )
1107	\| (yy_start) = 1; /* first start state */
1108	\|
1109	\| if ( ! yyin )
1110	\| yyin = stdin;
1111	\|
1112	\| if ( ! yyout )
1113	\| yyout = stdout;
1114	\|
1115	\| if ( ! YY_CURRENT_BUFFER ) {
1116	\| yyensure_buffer_stack ();
1117	\| YY_CURRENT_BUFFER_LVALUE =
1118	\| yy_create_buffer(yyin,YY_BUF_SIZE );
1119	\| }
1120	\|
1121	\| yy_load_buffer_state( );
1122	\| }
1123	\|
1124	\| while ( 1 ) /* loops until end-of-file is reached */
1125	\| {
1126	\| (yy_more_len) = 0;
1127	\| if ( (yy_more_flag) )
1128	\| {
1129	\| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
1130	\| (yy_more_flag) = 0;
1131	\| }
1132	\| yy_cp = (yy_c_buf_p);
1133	\|
1134	\| /* Support of yytext. */
1135	\| *yy_cp = (yy_hold_char);
1136	\|
1137	\| /* yy_bp points to the position in yy_ch_buf of the start of
1138	\| * the current run.
1139	\| */
1140	\| yy_bp = yy_cp;
1141	\|
1142	\| yy_current_state = (yy_start);
1143	\|
1144	\| (yy_state_ptr) = (yy_state_buf);
1145	\| *(yy_state_ptr)++ = yy_current_state;
1146	\|
1147	\| yy_match:
1148	\| do
1149	\| {
1150	\| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
1151	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1152	\| {
1153	\| yy_current_state = (int) yy_def[yy_current_state];
1154	\| if ( yy_current_state >= 13 )
1155	\| yy_c = yy_meta[(unsigned int) yy_c];
1156	\| }
1157	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1158	\| *(yy_state_ptr)++ = yy_current_state;
1159	\| ++yy_cp;
1160	\| }
1161	\| while ( yy_base[yy_current_state] != 10 );
1162	\|
1163	\| yy_find_action:
1164	\| yy_current_state = *--(yy_state_ptr);
1165	\| (yy_lp) = yy_accept[yy_current_state];
1166	\| goto find_rule; /* Shut up GCC warning -Wall */
1167	\| find_rule: /* we branch to this label when backing up */
1168	\| for ( ; ; ) /* until we find what rule we matched */
1169	\| {
1170	\| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
1171	\| {
1172	\| yy_act = yy_acclist[(yy_lp)];
1173	\| {
1174	\| (yy_full_match) = yy_cp;
1175	\| break;
1176	\| }
1177	\| }
1178	\| --yy_cp;
1179	\| yy_current_state = *--(yy_state_ptr);
1180	\| (yy_lp) = yy_accept[yy_current_state];
1181	\| }
1182	\|
1183	\| YY_DO_BEFORE_ACTION;
1184	\|
1185	\| do_action: /* This label is used only to access EOF actions. */
1186	\|
1187	\| switch ( yy_act )
1188	\| { /* beginning of action switch */
1189	\| case 1:
1190	\| YY_RULE_SETUP
1191	\| #line 2 "conftest.l"
1192	\| { ECHO; }
1193	\| YY_BREAK
1194	\| case 2:
1195	\| YY_RULE_SETUP
1196	\| #line 3 "conftest.l"
1197	\| { REJECT; }
1198	\| YY_BREAK
1199	\| case 3:
1200	\| YY_RULE_SETUP
1201	\| #line 4 "conftest.l"
1202	\| { yymore (); }
1203	\| YY_BREAK
1204	\| case 4:
1205	\| YY_RULE_SETUP
1206	\| #line 5 "conftest.l"
1207	\| { yyless (1); }
1208	\| YY_BREAK
1209	\| case 5:
1210	\| YY_RULE_SETUP
1211	\| #line 6 "conftest.l"
1212	\| { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
1213	\| yyless ((input () != 0)); }
1214	\| YY_BREAK
1215	\| case 6:
1216	\| YY_RULE_SETUP
1217	\| #line 8 "conftest.l"
1218	\| { unput (yytext[0]); }
1219	\| YY_BREAK
1220	\| case 7:
1221	\| YY_RULE_SETUP
1222	\| #line 9 "conftest.l"
1223	\| { BEGIN INITIAL; }
1224	\| YY_BREAK
1225	\| case 8:
1226	\| YY_RULE_SETUP
1227	\| #line 10 "conftest.l"
1228	\| ECHO;
1229	\| YY_BREAK
1230	\| #line 793 "lex.yy.c"
1231	\| case YY_STATE_EOF(INITIAL):
1232	\| yyterminate();
1233	\|
1234	\| case YY_END_OF_BUFFER:
1235	\| {
1236	\| /* Amount of text matched not including the EOB char. */
1237	\| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
1238	\|
1239	\| /* Undo the effects of YY_DO_BEFORE_ACTION. */
1240	\| *yy_cp = (yy_hold_char);
1241	\| YY_RESTORE_YY_MORE_OFFSET
1242	\|
1243	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
1244	\| {
1245	\| /* We're scanning a new file or input source. It's
1246	\| * possible that this happened because the user
1247	\| * just pointed yyin at a new source and called
1248	\| * yylex(). If so, then we have to assure
1249	\| * consistency between YY_CURRENT_BUFFER and our
1250	\| * globals. Here is the right place to do so, because
1251	\| * this is the first action (other than possibly a
1252	\| * back-up) that will match for the new input source.
1253	\| */
1254	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1255	\| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
1256	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
1257	\| }
1258	\|
1259	\| /* Note that here we test for yy_c_buf_p "<=" to the position
1260	\| * of the first EOB in the buffer, since yy_c_buf_p will
1261	\| * already have been incremented past the NUL character
1262	\| * (since all states make transitions on EOB to the
1263	\| * end-of-buffer state). Contrast this with the test
1264	\| * in input().
1265	\| */
1266	\| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1267	\| { /* This was really a NUL. */
1268	\| yy_state_type yy_next_state;
1269	\|
1270	\| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
1271	\|
1272	\| yy_current_state = yy_get_previous_state( );
1273	\|
1274	\| /* Okay, we're now positioned to make the NUL
1275	\| * transition. We couldn't have
1276	\| * yy_get_previous_state() go ahead and do it
1277	\| * for us because it doesn't know how to deal
1278	\| * with the possibility of jamming (and we don't
1279	\| * want to build jamming into it because then it
1280	\| * will run more slowly).
1281	\| */
1282	\|
1283	\| yy_next_state = yy_try_NUL_trans( yy_current_state );
1284	\|
1285	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1286	\|
1287	\| if ( yy_next_state )
1288	\| {
1289	\| /* Consume the NUL. */
1290	\| yy_cp = ++(yy_c_buf_p);
1291	\| yy_current_state = yy_next_state;
1292	\| goto yy_match;
1293	\| }
1294	\|
1295	\| else
1296	\| {
1297	\| yy_cp = (yy_c_buf_p);
1298	\| goto yy_find_action;
1299	\| }
1300	\| }
1301	\|
1302	\| else switch ( yy_get_next_buffer( ) )
1303	\| {
1304	\| case EOB_ACT_END_OF_FILE:
1305	\| {
1306	\| (yy_did_buffer_switch_on_eof) = 0;
1307	\|
1308	\| if ( yywrap( ) )
1309	\| {
1310	\| /* Note: because we've taken care in
1311	\| * yy_get_next_buffer() to have set up
1312	\| * yytext, we can now set up
1313	\| * yy_c_buf_p so that if some total
1314	\| * hoser (like flex itself) wants to
1315	\| * call the scanner after we return the
1316	\| * YY_NULL, it'll still work - another
1317	\| * YY_NULL will get returned.
1318	\| */
1319	\| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
1320	\|
1321	\| yy_act = YY_STATE_EOF(YY_START);
1322	\| goto do_action;
1323	\| }
1324	\|
1325	\| else
1326	\| {
1327	\| if ( ! (yy_did_buffer_switch_on_eof) )
1328	\| YY_NEW_FILE;
1329	\| }
1330	\| break;
1331	\| }
1332	\|
1333	\| case EOB_ACT_CONTINUE_SCAN:
1334	\| (yy_c_buf_p) =
1335	\| (yytext_ptr) + yy_amount_of_matched_text;
1336	\|
1337	\| yy_current_state = yy_get_previous_state( );
1338	\|
1339	\| yy_cp = (yy_c_buf_p);
1340	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1341	\| goto yy_match;
1342	\|
1343	\| case EOB_ACT_LAST_MATCH:
1344	\| (yy_c_buf_p) =
1345	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
1346	\|
1347	\| yy_current_state = yy_get_previous_state( );
1348	\|
1349	\| yy_cp = (yy_c_buf_p);
1350	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1351	\| goto yy_find_action;
1352	\| }
1353	\| break;
1354	\| }
1355	\|
1356	\| default:
1357	\| YY_FATAL_ERROR(
1358	\| "fatal flex scanner internal error--no action found" );
1359	\| } /* end of action switch */
1360	\| } /* end of scanning one token */
1361	\| } /* end of yylex */
1362	\|
1363	\| /* yy_get_next_buffer - try to read in a new buffer
1364	\| *
1365	\| * Returns a code representing an action:
1366	\| * EOB_ACT_LAST_MATCH -
1367	\| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
1368	\| * EOB_ACT_END_OF_FILE - end of file
1369	\| */
1370	\| static int yy_get_next_buffer (void)
1371	\| {
1372	\| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
1373	\| register char *source = (yytext_ptr);
1374	\| register int number_to_move, i;
1375	\| int ret_val;
1376	\|
1377	\| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
1378	\| YY_FATAL_ERROR(
1379	\| "fatal flex scanner internal error--end of buffer missed" );
1380	\|
1381	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
1382	\| { /* Don't try to fill the buffer, so this is an EOF. */
1383	\| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
1384	\| {
1385	\| /* We matched a single character, the EOB, so
1386	\| * treat this as a final EOF.
1387	\| */
1388	\| return EOB_ACT_END_OF_FILE;
1389	\| }
1390	\|
1391	\| else
1392	\| {
1393	\| /* We matched some text prior to the EOB, first
1394	\| * process it.
1395	\| */
1396	\| return EOB_ACT_LAST_MATCH;
1397	\| }
1398	\| }
1399	\|
1400	\| /* Try to read more data. */
1401	\|
1402	\| /* First move last chars to start of buffer. */
1403	\| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
1404	\|
1405	\| for ( i = 0; i < number_to_move; ++i )
1406	\| (dest++) = (source++);
1407	\|
1408	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
1409	\| /* don't do the read, it's not guaranteed to return an EOF,
1410	\| * just force an EOF
1411	\| */
1412	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
1413	\|
1414	\| else
1415	\| {
1416	\| yy_size_t num_to_read =
1417	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
1418	\|
1419	\| while ( num_to_read <= 0 )
1420	\| { /* Not enough room in the buffer - grow it. */
1421	\|
1422	\| YY_FATAL_ERROR(
1423	\| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
1424	\|
1425	\| }
1426	\|
1427	\| if ( num_to_read > YY_READ_BUF_SIZE )
1428	\| num_to_read = YY_READ_BUF_SIZE;
1429	\|
1430	\| /* Read in more data. */
1431	\| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
1432	\| (yy_n_chars), num_to_read );
1433	\|
1434	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1435	\| }
1436	\|
1437	\| if ( (yy_n_chars) == 0 )
1438	\| {
1439	\| if ( number_to_move == YY_MORE_ADJ )
1440	\| {
1441	\| ret_val = EOB_ACT_END_OF_FILE;
1442	\| yyrestart(yyin );
1443	\| }
1444	\|
1445	\| else
1446	\| {
1447	\| ret_val = EOB_ACT_LAST_MATCH;
1448	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
1449	\| YY_BUFFER_EOF_PENDING;
1450	\| }
1451	\| }
1452	\|
1453	\| else
1454	\| ret_val = EOB_ACT_CONTINUE_SCAN;
1455	\|
1456	\| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
1457	\| /* Extend the array by 50%, plus the number we really need. */
1458	\| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
1459	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char ) yyrealloc((void ) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
1460	\| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1461	\| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
1462	\| }
1463	\|
1464	\| (yy_n_chars) += number_to_move;
1465	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
1466	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
1467	\|
1468	\| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
1469	\|
1470	\| return ret_val;
1471	\| }
1472	\|
1473	\| /* yy_get_previous_state - get the state just before the EOB char was reached */
1474	\|
1475	\| static yy_state_type yy_get_previous_state (void)
1476	\| {
1477	\| register yy_state_type yy_current_state;
1478	\| register char *yy_cp;
1479	\|
1480	\| yy_current_state = (yy_start);
1481	\|
1482	\| (yy_state_ptr) = (yy_state_buf);
1483	\| *(yy_state_ptr)++ = yy_current_state;
1484	\|
1485	\| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
1486	\| {
1487	\| register YY_CHAR yy_c = (yy_cp ? yy_ec[YY_SC_TO_UI(yy_cp)] : 1);
1488	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1489	\| {
1490	\| yy_current_state = (int) yy_def[yy_current_state];
1491	\| if ( yy_current_state >= 13 )
1492	\| yy_c = yy_meta[(unsigned int) yy_c];
1493	\| }
1494	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1495	\| *(yy_state_ptr)++ = yy_current_state;
1496	\| }
1497	\|
1498	\| return yy_current_state;
1499	\| }
1500	\|
1501	\| /* yy_try_NUL_trans - try to make a transition on the NUL character
1502	\| *
1503	\| * synopsis
1504	\| * next_state = yy_try_NUL_trans( current_state );
1505	\| */
1506	\| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
1507	\| {
1508	\| register int yy_is_jam;
1509	\|
1510	\| register YY_CHAR yy_c = 1;
1511	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1512	\| {
1513	\| yy_current_state = (int) yy_def[yy_current_state];
1514	\| if ( yy_current_state >= 13 )
1515	\| yy_c = yy_meta[(unsigned int) yy_c];
1516	\| }
1517	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1518	\| yy_is_jam = (yy_current_state == 12);
1519	\| if ( ! yy_is_jam )
1520	\| *(yy_state_ptr)++ = yy_current_state;
1521	\|
1522	\| return yy_is_jam ? 0 : yy_current_state;
1523	\| }
1524	\|
1525	\| static void yyunput (int c, register char * yy_bp )
1526	\| {
1527	\| register char *yy_cp;
1528	\|
1529	\| yy_cp = (yy_c_buf_p);
1530	\|
1531	\| /* undo effects of setting up yytext */
1532	\| *yy_cp = (yy_hold_char);
1533	\|
1534	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1535	\| { /* need to shift things up to make room */
1536	\| /* +2 for EOB chars. */
1537	\| register yy_size_t number_to_move = (yy_n_chars) + 2;
1538	\| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
1539	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
1540	\| register char *source =
1541	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
1542	\|
1543	\| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1544	\| --dest = --source;
1545	\|
1546	\| yy_cp += (int) (dest - source);
1547	\| yy_bp += (int) (dest - source);
1548	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
1549	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
1550	\|
1551	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1552	\| YY_FATAL_ERROR( "flex scanner push-back overflow" );
1553	\| }
1554	\|
1555	\| *--yy_cp = (char) c;
1556	\|
1557	\| (yytext_ptr) = yy_bp;
1558	\| (yy_hold_char) = *yy_cp;
1559	\| (yy_c_buf_p) = yy_cp;
1560	\| }
1561	\|
1562	\| #ifndef YY_NO_INPUT
1563	\| #ifdef __cplusplus
1564	\| static int yyinput (void)
1565	\| #else
1566	\| static int input (void)
1567	\| #endif
1568	\|
1569	\| {
1570	\| int c;
1571	\|
1572	\| *(yy_c_buf_p) = (yy_hold_char);
1573	\|
1574	\| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
1575	\| {
1576	\| /* yy_c_buf_p now points to the character we want to return.
1577	\| * If this occurs before the EOB characters, then it's a
1578	\| * valid NUL; if not, then we've hit the end of the buffer.
1579	\| */
1580	\| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1581	\| /* This was really a NUL. */
1582	\| *(yy_c_buf_p) = '\0';
1583	\|
1584	\| else
1585	\| { /* need more input */
1586	\| yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
1587	\| ++(yy_c_buf_p);
1588	\|
1589	\| switch ( yy_get_next_buffer( ) )
1590	\| {
1591	\| case EOB_ACT_LAST_MATCH:
1592	\| /* This happens because yy_g_n_b()
1593	\| * sees that we've accumulated a
1594	\| * token and flags that we need to
1595	\| * try matching the token before
1596	\| * proceeding. But for input(),
1597	\| * there's no matching to consider.
1598	\| * So convert the EOB_ACT_LAST_MATCH
1599	\| * to EOB_ACT_END_OF_FILE.
1600	\| */
1601	\|
1602	\| /* Reset buffer status. */
1603	\| yyrestart(yyin );
1604	\|
1605	\| /FALLTHROUGH/
1606	\|
1607	\| case EOB_ACT_END_OF_FILE:
1608	\| {
1609	\| if ( yywrap( ) )
1610	\| return 0;
1611	\|
1612	\| if ( ! (yy_did_buffer_switch_on_eof) )
1613	\| YY_NEW_FILE;
1614	\| #ifdef __cplusplus
1615	\| return yyinput();
1616	\| #else
1617	\| return input();
1618	\| #endif
1619	\| }
1620	\|
1621	\| case EOB_ACT_CONTINUE_SCAN:
1622	\| (yy_c_buf_p) = (yytext_ptr) + offset;
1623	\| break;
1624	\| }
1625	\| }
1626	\| }
1627	\|
1628	\| c = (unsigned char ) (yy_c_buf_p); /* cast for 8-bit char's */
1629	\| (yy_c_buf_p) = '\0'; / preserve yytext */
1630	\| (yy_hold_char) = *++(yy_c_buf_p);
1631	\|
1632	\| return c;
1633	\| }
1634	\| #endif /* ifndef YY_NO_INPUT */
1635	\|
1636	\| /** Immediately switch to a different input stream.
1637	\| * @param input_file A readable stream.
1638	\| *
1639	\| * @note This function does not reset the start condition to @c INITIAL .
1640	\| */
1641	\| void yyrestart (FILE * input_file )
1642	\| {
1643	\|
1644	\| if ( ! YY_CURRENT_BUFFER ){
1645	\| yyensure_buffer_stack ();
1646	\| YY_CURRENT_BUFFER_LVALUE =
1647	\| yy_create_buffer(yyin,YY_BUF_SIZE );
1648	\| }
1649	\|
1650	\| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
1651	\| yy_load_buffer_state( );
1652	\| }
1653	\|
1654	\| /** Switch to a different input buffer.
1655	\| * @param new_buffer The new input buffer.
1656	\| *
1657	\| */
1658	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
1659	\| {
1660	\|
1661	\| /* TODO. We should be able to replace this entire function body
1662	\| * with
1663	\| * yypop_buffer_state();
1664	\| * yypush_buffer_state(new_buffer);
1665	\| */
1666	\| yyensure_buffer_stack ();
1667	\| if ( YY_CURRENT_BUFFER == new_buffer )
1668	\| return;
1669	\|
1670	\| if ( YY_CURRENT_BUFFER )
1671	\| {
1672	\| /* Flush out information for old buffer. */
1673	\| *(yy_c_buf_p) = (yy_hold_char);
1674	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1675	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1676	\| }
1677	\|
1678	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
1679	\| yy_load_buffer_state( );
1680	\|
1681	\| /* We don't actually know whether we did this switch during
1682	\| * EOF (yywrap()) processing, but the only time this flag
1683	\| * is looked at is after yywrap() is called, so it's safe
1684	\| * to go ahead and always set it.
1685	\| */
1686	\| (yy_did_buffer_switch_on_eof) = 1;
1687	\| }
1688	\|
1689	\| static void yy_load_buffer_state (void)
1690	\| {
1691	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1692	\| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
1693	\| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
1694	\| (yy_hold_char) = *(yy_c_buf_p);
1695	\| }
1696	\|
1697	\| /** Allocate and initialize an input buffer state.
1698	\| * @param file A readable stream.
1699	\| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
1700	\| *
1701	\| * @return the allocated buffer state.
1702	\| */
1703	\| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
1704	\| {
1705	\| YY_BUFFER_STATE b;
1706	\|
1707	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
1708	\| if ( ! b )
1709	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
1710	\|
1711	\| b->yy_buf_size = size;
1712	\|
1713	\| /* yy_ch_buf has to be 2 characters longer than the size given because
1714	\| * we need to put in 2 end-of-buffer characters.
1715	\| */
1716	\| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
1717	\| if ( ! b->yy_ch_buf )
1718	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
1719	\|
1720	\| b->yy_is_our_buffer = 1;
1721	\|
1722	\| yy_init_buffer(b,file );
1723	\|
1724	\| return b;
1725	\| }
1726	\|
1727	\| /** Destroy the buffer.
1728	\| * @param b a buffer created with yy_create_buffer()
1729	\| *
1730	\| */
1731	\| void yy_delete_buffer (YY_BUFFER_STATE b )
1732	\| {
1733	\|
1734	\| if ( ! b )
1735	\| return;
1736	\|
1737	\| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
1738	\| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
1739	\|
1740	\| if ( b->yy_is_our_buffer )
1741	\| yyfree((void *) b->yy_ch_buf );
1742	\|
1743	\| yyfree((void *) b );
1744	\| }
1745	\|
1746	\| #ifndef __cplusplus
1747	\| extern int isatty (int );
1748	\| #endif /* __cplusplus */
1749	\|
1750	\| /* Initializes or reinitializes a buffer.
1751	\| * This function is sometimes called more than once on the same buffer,
1752	\| * such as during a yyrestart() or at EOF.
1753	\| */
1754	\| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
1755	\|
1756	\| {
1757	\| int oerrno = errno;
1758	\|
1759	\| yy_flush_buffer(b );
1760	\|
1761	\| b->yy_input_file = file;
1762	\| b->yy_fill_buffer = 1;
1763	\|
1764	\| /* If b is the current buffer, then yy_init_buffer was _probably_
1765	\| * called from yyrestart() or through yy_get_next_buffer.
1766	\| * In that case, we don't want to reset the lineno or column.
1767	\| */
1768	\| if (b != YY_CURRENT_BUFFER){
1769	\| b->yy_bs_lineno = 1;
1770	\| b->yy_bs_column = 0;
1771	\| }
1772	\|
1773	\| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
1774	\|
1775	\| errno = oerrno;
1776	\| }
1777	\|
1778	\| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
1779	\| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
1780	\| *
1781	\| */
1782	\| void yy_flush_buffer (YY_BUFFER_STATE b )
1783	\| {
1784	\| if ( ! b )
1785	\| return;
1786	\|
1787	\| b->yy_n_chars = 0;
1788	\|
1789	\| /* We always need two end-of-buffer characters. The first causes
1790	\| * a transition to the end-of-buffer state. The second causes
1791	\| * a jam in that state.
1792	\| */
1793	\| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
1794	\| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
1795	\|
1796	\| b->yy_buf_pos = &b->yy_ch_buf[0];
1797	\|
1798	\| b->yy_at_bol = 1;
1799	\| b->yy_buffer_status = YY_BUFFER_NEW;
1800	\|
1801	\| if ( b == YY_CURRENT_BUFFER )
1802	\| yy_load_buffer_state( );
1803	\| }
1804	\|
1805	\| /** Pushes the new state onto the stack. The new state becomes
1806	\| * the current state. This function will allocate the stack
1807	\| * if necessary.
1808	\| * @param new_buffer The new state.
1809	\| *
1810	\| */
1811	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
1812	\| {
1813	\| if (new_buffer == NULL)
1814	\| return;
1815	\|
1816	\| yyensure_buffer_stack();
1817	\|
1818	\| /* This block is copied from yy_switch_to_buffer. */
1819	\| if ( YY_CURRENT_BUFFER )
1820	\| {
1821	\| /* Flush out information for old buffer. */
1822	\| *(yy_c_buf_p) = (yy_hold_char);
1823	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1824	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1825	\| }
1826	\|
1827	\| /* Only push if top exists. Otherwise, replace top. */
1828	\| if (YY_CURRENT_BUFFER)
1829	\| (yy_buffer_stack_top)++;
1830	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
1831	\|
1832	\| /* copied from yy_switch_to_buffer. */
1833	\| yy_load_buffer_state( );
1834	\| (yy_did_buffer_switch_on_eof) = 1;
1835	\| }
1836	\|
1837	\| /** Removes and deletes the top of the stack, if present.
1838	\| * The next element becomes the new top.
1839	\| *
1840	\| */
1841	\| void yypop_buffer_state (void)
1842	\| {
1843	\| if (!YY_CURRENT_BUFFER)
1844	\| return;
1845	\|
1846	\| yy_delete_buffer(YY_CURRENT_BUFFER );
1847	\| YY_CURRENT_BUFFER_LVALUE = NULL;
1848	\| if ((yy_buffer_stack_top) > 0)
1849	\| --(yy_buffer_stack_top);
1850	\|
1851	\| if (YY_CURRENT_BUFFER) {
1852	\| yy_load_buffer_state( );
1853	\| (yy_did_buffer_switch_on_eof) = 1;
1854	\| }
1855	\| }
1856	\|
1857	\| /* Allocates the stack if it does not exist.
1858	\| * Guarantees space for at least one push.
1859	\| */
1860	\| static void yyensure_buffer_stack (void)
1861	\| {
1862	\| yy_size_t num_to_alloc;
1863	\|
1864	\| if (!(yy_buffer_stack)) {
1865	\|
1866	\| /* First allocation is just for 2 elements, since we don't know if this
1867	\| * scanner will even need a stack. We use 2 instead of 1 to avoid an
1868	\| * immediate realloc on the next call.
1869	\| */
1870	\| num_to_alloc = 1;
1871	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
1872	\| (num_to_alloc * sizeof(struct yy_buffer_state*)
1873	\| );
1874	\| if ( ! (yy_buffer_stack) )
1875	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
1876	\|
1877	\| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
1878	\|
1879	\| (yy_buffer_stack_max) = num_to_alloc;
1880	\| (yy_buffer_stack_top) = 0;
1881	\| return;
1882	\| }
1883	\|
1884	\| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
1885	\|
1886	\| /* Increase the buffer to prepare for a possible push. */
1887	\| int grow_size = 8 /* arbitrary grow size */;
1888	\|
1889	\| num_to_alloc = (yy_buffer_stack_max) + grow_size;
1890	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
1891	\| ((yy_buffer_stack),
1892	\| num_to_alloc * sizeof(struct yy_buffer_state*)
1893	\| );
1894	\| if ( ! (yy_buffer_stack) )
1895	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
1896	\|
1897	\| /* zero only the new slots.*/
1898	\| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
1899	\| (yy_buffer_stack_max) = num_to_alloc;
1900	\| }
1901	\| }
1902	\|
1903	\| /** Setup the input buffer state to scan directly from a user-specified character buffer.
1904	\| * @param base the character buffer
1905	\| * @param size the size in bytes of the character buffer
1906	\| *
1907	\| * @return the newly allocated buffer state object.
1908	\| */
1909	\| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
1910	\| {
1911	\| YY_BUFFER_STATE b;
1912	\|
1913	\| if ( size < 2 \|\|
1914	\| base[size-2] != YY_END_OF_BUFFER_CHAR \|\|
1915	\| base[size-1] != YY_END_OF_BUFFER_CHAR )
1916	\| /* They forgot to leave room for the EOB's. */
1917	\| return 0;
1918	\|
1919	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
1920	\| if ( ! b )
1921	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
1922	\|
1923	\| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
1924	\| b->yy_buf_pos = b->yy_ch_buf = base;
1925	\| b->yy_is_our_buffer = 0;
1926	\| b->yy_input_file = 0;
1927	\| b->yy_n_chars = b->yy_buf_size;
1928	\| b->yy_is_interactive = 0;
1929	\| b->yy_at_bol = 1;
1930	\| b->yy_fill_buffer = 0;
1931	\| b->yy_buffer_status = YY_BUFFER_NEW;
1932	\|
1933	\| yy_switch_to_buffer(b );
1934	\|
1935	\| return b;
1936	\| }
1937	\|
1938	\| /** Setup the input buffer state to scan a string. The next call to yylex() will
1939	\| * scan from a @e copy of @a str.
1940	\| * @param yystr a NUL-terminated string to scan
1941	\| *
1942	\| * @return the newly allocated buffer state object.
1943	\| * @note If you want to scan bytes that may contain NUL values, then use
1944	\| * yy_scan_bytes() instead.
1945	\| */
1946	\| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
1947	\| {
1948	\|
1949	\| return yy_scan_bytes(yystr,strlen(yystr) );
1950	\| }
1951	\|
1952	\| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
1953	\| * scan from a @e copy of @a bytes.
1954	\| * @param bytes the byte buffer to scan
1955	\| * @param len the number of bytes in the buffer pointed to by @a bytes.
1956	\| *
1957	\| * @return the newly allocated buffer state object.
1958	\| */
1959	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
1960	\| {
1961	\| YY_BUFFER_STATE b;
1962	\| char *buf;
1963	\| yy_size_t n, i;
1964	\|
1965	\| /* Get memory for full buffer, including space for trailing EOB's. */
1966	\| n = _yybytes_len + 2;
1967	\| buf = (char *) yyalloc(n );
1968	\| if ( ! buf )
1969	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
1970	\|
1971	\| for ( i = 0; i < _yybytes_len; ++i )
1972	\| buf[i] = yybytes[i];
1973	\|
1974	\| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
1975	\|
1976	\| b = yy_scan_buffer(buf,n );
1977	\| if ( ! b )
1978	\| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
1979	\|
1980	\| /* It's okay to grow etc. this buffer, and we should throw it
1981	\| * away when we're done.
1982	\| */
1983	\| b->yy_is_our_buffer = 1;
1984	\|
1985	\| return b;
1986	\| }
1987	\|
1988	\| #ifndef YY_EXIT_FAILURE
1989	\| #define YY_EXIT_FAILURE 2
1990	\| #endif
1991	\|
1992	\| static void yy_fatal_error (yyconst char* msg )
1993	\| {
1994	\| (void) fprintf( stderr, "%s\n", msg );
1995	\| exit( YY_EXIT_FAILURE );
1996	\| }
1997	\|
1998	\| /* Redefine yyless() so it works in section 3 code. */
1999	\|
2000	\| #undef yyless
2001	\| #define yyless(n) \
2002	\| do \
2003	\| { \
2004	\| /* Undo effects of setting up yytext. */ \
2005	\| int yyless_macro_arg = (n); \
2006	\| YY_LESS_LINENO(yyless_macro_arg);\
2007	\| yytext[yyleng] = (yy_hold_char); \
2008	\| (yy_c_buf_p) = yytext + yyless_macro_arg; \
2009	\| (yy_hold_char) = *(yy_c_buf_p); \
2010	\| *(yy_c_buf_p) = '\0'; \
2011	\| yyleng = yyless_macro_arg; \
2012	\| } \
2013	\| while ( 0 )
2014	\|
2015	\| /* Accessor methods (get/set functions) to struct members. */
2016	\|
2017	\| /** Get the current line number.
2018	\| *
2019	\| */
2020	\| int yyget_lineno (void)
2021	\| {
2022	\|
2023	\| return yylineno;
2024	\| }
2025	\|
2026	\| /** Get the input stream.
2027	\| *
2028	\| */
2029	\| FILE *yyget_in (void)
2030	\| {
2031	\| return yyin;
2032	\| }
2033	\|
2034	\| /** Get the output stream.
2035	\| *
2036	\| */
2037	\| FILE *yyget_out (void)
2038	\| {
2039	\| return yyout;
2040	\| }
2041	\|
2042	\| /** Get the length of the current token.
2043	\| *
2044	\| */
2045	\| yy_size_t yyget_leng (void)
2046	\| {
2047	\| return yyleng;
2048	\| }
2049	\|
2050	\| /** Get the current token.
2051	\| *
2052	\| */
2053	\|
2054	\| char *yyget_text (void)
2055	\| {
2056	\| return yytext;
2057	\| }
2058	\|
2059	\| /** Set the current line number.
2060	\| * @param line_number
2061	\| *
2062	\| */
2063	\| void yyset_lineno (int line_number )
2064	\| {
2065	\|
2066	\| yylineno = line_number;
2067	\| }
2068	\|
2069	\| /** Set the input stream. This does not discard the current
2070	\| * input buffer.
2071	\| * @param in_str A readable stream.
2072	\| *
2073	\| * @see yy_switch_to_buffer
2074	\| */
2075	\| void yyset_in (FILE * in_str )
2076	\| {
2077	\| yyin = in_str ;
2078	\| }
2079	\|
2080	\| void yyset_out (FILE * out_str )
2081	\| {
2082	\| yyout = out_str ;
2083	\| }
2084	\|
2085	\| int yyget_debug (void)
2086	\| {
2087	\| return yy_flex_debug;
2088	\| }
2089	\|
2090	\| void yyset_debug (int bdebug )
2091	\| {
2092	\| yy_flex_debug = bdebug ;
2093	\| }
2094	\|
2095	\| static int yy_init_globals (void)
2096	\| {
2097	\| /* Initialization is the same as for the non-reentrant scanner.
2098	\| * This function is called from yylex_destroy(), so don't allocate here.
2099	\| */
2100	\|
2101	\| (yy_buffer_stack) = 0;
2102	\| (yy_buffer_stack_top) = 0;
2103	\| (yy_buffer_stack_max) = 0;
2104	\| (yy_c_buf_p) = (char *) 0;
2105	\| (yy_init) = 0;
2106	\| (yy_start) = 0;
2107	\|
2108	\| (yy_state_buf) = 0;
2109	\| (yy_state_ptr) = 0;
2110	\| (yy_full_match) = 0;
2111	\| (yy_lp) = 0;
2112	\|
2113	\| /* Defined in main.c */
2114	\| #ifdef YY_STDINIT
2115	\| yyin = stdin;
2116	\| yyout = stdout;
2117	\| #else
2118	\| yyin = (FILE *) 0;
2119	\| yyout = (FILE *) 0;
2120	\| #endif
2121	\|
2122	\| /* For future reference: Set errno on error, since we are called by
2123	\| * yylex_init()
2124	\| */
2125	\| return 0;
2126	\| }
2127	\|
2128	\| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
2129	\| int yylex_destroy (void)
2130	\| {
2131	\|
2132	\| /* Pop the buffer stack, destroying each element. */
2133	\| while(YY_CURRENT_BUFFER){
2134	\| yy_delete_buffer(YY_CURRENT_BUFFER );
2135	\| YY_CURRENT_BUFFER_LVALUE = NULL;
2136	\| yypop_buffer_state();
2137	\| }
2138	\|
2139	\| /* Destroy the stack itself. */
2140	\| yyfree((yy_buffer_stack) );
2141	\| (yy_buffer_stack) = NULL;
2142	\|
2143	\| yyfree ( (yy_state_buf) );
2144	\| (yy_state_buf) = NULL;
2145	\|
2146	\| /* Reset the globals. This is important in a non-reentrant scanner so the next time
2147	\| * yylex() is called, initialization will occur. */
2148	\| yy_init_globals( );
2149	\|
2150	\| return 0;
2151	\| }
2152	\|
2153	\| /*
2154	\| * Internal utility routines.
2155	\| */
2156	\|
2157	\| #ifndef yytext_ptr
2158	\| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
2159	\| {
2160	\| register int i;
2161	\| for ( i = 0; i < n; ++i )
2162	\| s1[i] = s2[i];
2163	\| }
2164	\| #endif
2165	\|
2166	\| #ifdef YY_NEED_STRLEN
2167	\| static int yy_flex_strlen (yyconst char * s )
2168	\| {
2169	\| register int n;
2170	\| for ( n = 0; s[n]; ++n )
2171	\| ;
2172	\|
2173	\| return n;
2174	\| }
2175	\| #endif
2176	\|
2177	\| void *yyalloc (yy_size_t size )
2178	\| {
2179	\| return (void *) malloc( size );
2180	\| }
2181	\|
2182	\| void yyrealloc (void ptr, yy_size_t size )
2183	\| {
2184	\| /* The cast to (char *) in the following accommodates both
2185	\| * implementations that use char* generic pointers, and those
2186	\| * that use void* generic pointers. It works with the latter
2187	\| * because both ANSI C and C++ allow castless assignment from
2188	\| * any pointer type to void*, and deal with argument conversions
2189	\| * as though doing an assignment.
2190	\| */
2191	\| return (void ) realloc( (char ) ptr, size );
2192	\| }
2193	\|
2194	\| void yyfree (void * ptr )
2195	\| {
2196	\| free( (char ) ptr ); / see yyrealloc() for (char ) cast /
2197	\| }
2198	\|
2199	\| #define YYTABLES_NAME "yytables"
2200	\|
2201	\| #line 10 "conftest.l"
2202	\|
2203	\|
2204	\| #ifdef YYTEXT_POINTER
2205	\| extern char *yytext;
2206	\| #endif
2207	\| int
2208	\| main (void)
2209	\| {
2210	\| return ! yylex () + ! yywrap ();
2211	\| }
2212	configure:12249: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c -lfl >&5
2213	ld: library not found for -lfl
2214	clang: error: linker command failed with exit code 1 (use -v to see invocation)
2215	configure:12249: $? = 1
2216	configure: failed program was:
2217	\| /* confdefs.h */
2218	\| #define PACKAGE_NAME "gobject-introspection"
2219	\| #define PACKAGE_TARNAME "gobject-introspection"
2220	\| #define PACKAGE_VERSION "1.38.0"
2221	\| #define PACKAGE_STRING "gobject-introspection 1.38.0"
2222	\| #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection"
2223	\| #define PACKAGE_URL ""
2224	\| #define PACKAGE "gobject-introspection"
2225	\| #define VERSION "1.38.0"
2226	\| #define STDC_HEADERS 1
2227	\| #define HAVE_SYS_TYPES_H 1
2228	\| #define HAVE_SYS_STAT_H 1
2229	\| #define HAVE_STDLIB_H 1
2230	\| #define HAVE_STRING_H 1
2231	\| #define HAVE_MEMORY_H 1
2232	\| #define HAVE_STRINGS_H 1
2233	\| #define HAVE_INTTYPES_H 1
2234	\| #define HAVE_STDINT_H 1
2235	\| #define HAVE_UNISTD_H 1
2236	\| #define HAVE_DLFCN_H 1
2237	\| #define LT_OBJDIR ".libs/"
2238	\| /* end confdefs.h. */
2239	\|
2240	\| #line 3 "lex.yy.c"
2241	\|
2242	\| #define YY_INT_ALIGNED short int
2243	\|
2244	\| /* A lexical scanner generated by flex */
2245	\|
2246	\| #define FLEX_SCANNER
2247	\| #define YY_FLEX_MAJOR_VERSION 2
2248	\| #define YY_FLEX_MINOR_VERSION 5
2249	\| #define YY_FLEX_SUBMINOR_VERSION 35
2250	\| #if YY_FLEX_SUBMINOR_VERSION > 0
2251	\| #define FLEX_BETA
2252	\| #endif
2253	\|
2254	\| /* First, we deal with platform-specific or compiler-specific issues. */
2255	\|
2256	\| /* begin standard C headers. */
2257	\| #include <stdio.h>
2258	\| #include <string.h>
2259	\| #include <errno.h>
2260	\| #include <stdlib.h>
2261	\|
2262	\| /* end standard C headers. */
2263	\|
2264	\| /* flex integer type definitions */
2265	\|
2266	\| #ifndef FLEXINT_H
2267	\| #define FLEXINT_H
2268	\|
2269	\| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
2270	\|
2271	\| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
2272	\|
2273	\| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
2274	\| * if you want the limit (max/min) macros for int types.
2275	\| */
2276	\| #ifndef __STDC_LIMIT_MACROS
2277	\| #define __STDC_LIMIT_MACROS 1
2278	\| #endif
2279	\|
2280	\| #include <inttypes.h>
2281	\| typedef int8_t flex_int8_t;
2282	\| typedef uint8_t flex_uint8_t;
2283	\| typedef int16_t flex_int16_t;
2284	\| typedef uint16_t flex_uint16_t;
2285	\| typedef int32_t flex_int32_t;
2286	\| typedef uint32_t flex_uint32_t;
2287	\| typedef uint64_t flex_uint64_t;
2288	\| #else
2289	\| typedef signed char flex_int8_t;
2290	\| typedef short int flex_int16_t;
2291	\| typedef int flex_int32_t;
2292	\| typedef unsigned char flex_uint8_t;
2293	\| typedef unsigned short int flex_uint16_t;
2294	\| typedef unsigned int flex_uint32_t;
2295	\| #endif /* ! C99 */
2296	\|
2297	\| /* Limits of integral types. */
2298	\| #ifndef INT8_MIN
2299	\| #define INT8_MIN (-128)
2300	\| #endif
2301	\| #ifndef INT16_MIN
2302	\| #define INT16_MIN (-32767-1)
2303	\| #endif
2304	\| #ifndef INT32_MIN
2305	\| #define INT32_MIN (-2147483647-1)
2306	\| #endif
2307	\| #ifndef INT8_MAX
2308	\| #define INT8_MAX (127)
2309	\| #endif
2310	\| #ifndef INT16_MAX
2311	\| #define INT16_MAX (32767)
2312	\| #endif
2313	\| #ifndef INT32_MAX
2314	\| #define INT32_MAX (2147483647)
2315	\| #endif
2316	\| #ifndef UINT8_MAX
2317	\| #define UINT8_MAX (255U)
2318	\| #endif
2319	\| #ifndef UINT16_MAX
2320	\| #define UINT16_MAX (65535U)
2321	\| #endif
2322	\| #ifndef UINT32_MAX
2323	\| #define UINT32_MAX (4294967295U)
2324	\| #endif
2325	\|
2326	\| #endif /* ! FLEXINT_H */
2327	\|
2328	\| #ifdef __cplusplus
2329	\|
2330	\| /* The "const" storage-class-modifier is valid. */
2331	\| #define YY_USE_CONST
2332	\|
2333	\| #else /* ! __cplusplus */
2334	\|
2335	\| /* C99 requires __STDC__ to be defined as 1. */
2336	\| #if defined (__STDC__)
2337	\|
2338	\| #define YY_USE_CONST
2339	\|
2340	\| #endif /* defined (__STDC__) */
2341	\| #endif /* ! __cplusplus */
2342	\|
2343	\| #ifdef YY_USE_CONST
2344	\| #define yyconst const
2345	\| #else
2346	\| #define yyconst
2347	\| #endif
2348	\|
2349	\| /* Returned upon end-of-file. */
2350	\| #define YY_NULL 0
2351	\|
2352	\| /* Promotes a possibly negative, possibly signed char to an unsigned
2353	\| * integer for use as an array index. If the signed char is negative,
2354	\| * we want to instead treat it as an 8-bit unsigned char, hence the
2355	\| * double cast.
2356	\| */
2357	\| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
2358	\|
2359	\| /* Enter a start condition. This macro really ought to take a parameter,
2360	\| * but we do it the disgusting crufty way forced on us by the ()-less
2361	\| * definition of BEGIN.
2362	\| */
2363	\| #define BEGIN (yy_start) = 1 + 2 *
2364	\|
2365	\| /* Translate the current start state into a value that can be later handed
2366	\| * to BEGIN to return to the state. The YYSTATE alias is for lex
2367	\| * compatibility.
2368	\| */
2369	\| #define YY_START (((yy_start) - 1) / 2)
2370	\| #define YYSTATE YY_START
2371	\|
2372	\| /* Action number for EOF rule of a given start state. */
2373	\| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
2374	\|
2375	\| /* Special action meaning "start processing a new file". */
2376	\| #define YY_NEW_FILE yyrestart(yyin )
2377	\|
2378	\| #define YY_END_OF_BUFFER_CHAR 0
2379	\|
2380	\| /* Size of default input buffer. */
2381	\| #ifndef YY_BUF_SIZE
2382	\| #define YY_BUF_SIZE 16384
2383	\| #endif
2384	\|
2385	\| /* The state buf must be large enough to hold one state per character in the main buffer.
2386	\| */
2387	\| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
2388	\|
2389	\| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
2390	\| #define YY_TYPEDEF_YY_BUFFER_STATE
2391	\| typedef struct yy_buffer_state *YY_BUFFER_STATE;
2392	\| #endif
2393	\|
2394	\| #ifndef YY_TYPEDEF_YY_SIZE_T
2395	\| #define YY_TYPEDEF_YY_SIZE_T
2396	\| typedef size_t yy_size_t;
2397	\| #endif
2398	\|
2399	\| extern yy_size_t yyleng;
2400	\|
2401	\| extern FILE yyin, yyout;
2402	\|
2403	\| #define EOB_ACT_CONTINUE_SCAN 0
2404	\| #define EOB_ACT_END_OF_FILE 1
2405	\| #define EOB_ACT_LAST_MATCH 2
2406	\|
2407	\| #define YY_LESS_LINENO(n)
2408	\|
2409	\| /* Return all but the first "n" matched characters back to the input stream. */
2410	\| #define yyless(n) \
2411	\| do \
2412	\| { \
2413	\| /* Undo effects of setting up yytext. */ \
2414	\| int yyless_macro_arg = (n); \
2415	\| YY_LESS_LINENO(yyless_macro_arg);\
2416	\| *yy_cp = (yy_hold_char); \
2417	\| YY_RESTORE_YY_MORE_OFFSET \
2418	\| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
2419	\| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
2420	\| } \
2421	\| while ( 0 )
2422	\|
2423	\| #define unput(c) yyunput( c, (yytext_ptr) )
2424	\|
2425	\| #ifndef YY_STRUCT_YY_BUFFER_STATE
2426	\| #define YY_STRUCT_YY_BUFFER_STATE
2427	\| struct yy_buffer_state
2428	\| {
2429	\| FILE *yy_input_file;
2430	\|
2431	\| char yy_ch_buf; / input buffer */
2432	\| char yy_buf_pos; / current position in input buffer */
2433	\|
2434	\| /* Size of input buffer in bytes, not including room for EOB
2435	\| * characters.
2436	\| */
2437	\| yy_size_t yy_buf_size;
2438	\|
2439	\| /* Number of characters read into yy_ch_buf, not including EOB
2440	\| * characters.
2441	\| */
2442	\| yy_size_t yy_n_chars;
2443	\|
2444	\| /* Whether we "own" the buffer - i.e., we know we created it,
2445	\| * and can realloc() it to grow it, and should free() it to
2446	\| * delete it.
2447	\| */
2448	\| int yy_is_our_buffer;
2449	\|
2450	\| /* Whether this is an "interactive" input source; if so, and
2451	\| * if we're using stdio for input, then we want to use getc()
2452	\| * instead of fread(), to make sure we stop fetching input after
2453	\| * each newline.
2454	\| */
2455	\| int yy_is_interactive;
2456	\|
2457	\| /* Whether we're considered to be at the beginning of a line.
2458	\| * If so, '^' rules will be active on the next match, otherwise
2459	\| * not.
2460	\| */
2461	\| int yy_at_bol;
2462	\|
2463	\| int yy_bs_lineno; /*< The line count. /
2464	\| int yy_bs_column; /*< The column count. /
2465	\|
2466	\| /* Whether to try to fill the input buffer when we reach the
2467	\| * end of it.
2468	\| */
2469	\| int yy_fill_buffer;
2470	\|
2471	\| int yy_buffer_status;
2472	\|
2473	\| #define YY_BUFFER_NEW 0
2474	\| #define YY_BUFFER_NORMAL 1
2475	\| /* When an EOF's been seen but there's still some text to process
2476	\| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
2477	\| * shouldn't try reading from the input source any more. We might
2478	\| * still have a bunch of tokens to match, though, because of
2479	\| * possible backing-up.
2480	\| *
2481	\| * When we actually see the EOF, we change the status to "new"
2482	\| * (via yyrestart()), so that the user can continue scanning by
2483	\| * just pointing yyin at a new input file.
2484	\| */
2485	\| #define YY_BUFFER_EOF_PENDING 2
2486	\|
2487	\| };
2488	\| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
2489	\|
2490	\| /* Stack of input buffers. */
2491	\| static size_t yy_buffer_stack_top = 0; /*< index of top of stack. /
2492	\| static size_t yy_buffer_stack_max = 0; /*< capacity of stack. /
2493	\| static YY_BUFFER_STATE * yy_buffer_stack = 0; /*< Stack as an array. /
2494	\|
2495	\| /* We provide macros for accessing buffer states in case in the
2496	\| * future we want to put the buffer states in a more general
2497	\| * "scanner state".
2498	\| *
2499	\| * Returns the top of the stack, or NULL.
2500	\| */
2501	\| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
2502	\| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
2503	\| : NULL)
2504	\|
2505	\| /* Same as previous macro, but useful when we know that the buffer stack is not
2506	\| * NULL or when we need an lvalue. For internal use only.
2507	\| */
2508	\| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
2509	\|
2510	\| /* yy_hold_char holds the character lost when yytext is formed. */
2511	\| static char yy_hold_char;
2512	\| static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */
2513	\| yy_size_t yyleng;
2514	\|
2515	\| /* Points to current character in buffer. */
2516	\| static char yy_c_buf_p = (char ) 0;
2517	\| static int yy_init = 0; /* whether we need to initialize */
2518	\| static int yy_start = 0; /* start state number */
2519	\|
2520	\| /* Flag which is used to allow yywrap()'s to do buffer switches
2521	\| * instead of setting up a fresh yyin. A bit of a hack ...
2522	\| */
2523	\| static int yy_did_buffer_switch_on_eof;
2524	\|
2525	\| void yyrestart (FILE *input_file );
2526	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
2527	\| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
2528	\| void yy_delete_buffer (YY_BUFFER_STATE b );
2529	\| void yy_flush_buffer (YY_BUFFER_STATE b );
2530	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
2531	\| void yypop_buffer_state (void );
2532	\|
2533	\| static void yyensure_buffer_stack (void );
2534	\| static void yy_load_buffer_state (void );
2535	\| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
2536	\|
2537	\| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
2538	\|
2539	\| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
2540	\| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
2541	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len );
2542	\|
2543	\| void *yyalloc (yy_size_t );
2544	\| void yyrealloc (void ,yy_size_t );
2545	\| void yyfree (void * );
2546	\|
2547	\| #define yy_new_buffer yy_create_buffer
2548	\|
2549	\| #define yy_set_interactive(is_interactive) \
2550	\| { \
2551	\| if ( ! YY_CURRENT_BUFFER ){ \
2552	\| yyensure_buffer_stack (); \
2553	\| YY_CURRENT_BUFFER_LVALUE = \
2554	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
2555	\| } \
2556	\| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
2557	\| }
2558	\|
2559	\| #define yy_set_bol(at_bol) \
2560	\| { \
2561	\| if ( ! YY_CURRENT_BUFFER ){\
2562	\| yyensure_buffer_stack (); \
2563	\| YY_CURRENT_BUFFER_LVALUE = \
2564	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
2565	\| } \
2566	\| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
2567	\| }
2568	\|
2569	\| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
2570	\|
2571	\| /* Begin user sect3 */
2572	\|
2573	\| typedef unsigned char YY_CHAR;
2574	\|
2575	\| FILE yyin = (FILE ) 0, yyout = (FILE ) 0;
2576	\|
2577	\| typedef int yy_state_type;
2578	\|
2579	\| extern int yylineno;
2580	\|
2581	\| int yylineno = 1;
2582	\|
2583	\| extern char *yytext;
2584	\| #define yytext_ptr yytext
2585	\|
2586	\| static yy_state_type yy_get_previous_state (void );
2587	\| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
2588	\| static int yy_get_next_buffer (void );
2589	\| static void yy_fatal_error (yyconst char msg[] );
2590	\|
2591	\| /* Done after the current pattern has been matched and before the
2592	\| * corresponding action - sets up yytext.
2593	\| */
2594	\| #define YY_DO_BEFORE_ACTION \
2595	\| (yytext_ptr) = yy_bp; \
2596	\| (yytext_ptr) -= (yy_more_len); \
2597	\| yyleng = (yy_size_t) (yy_cp - (yytext_ptr)); \
2598	\| (yy_hold_char) = *yy_cp; \
2599	\| *yy_cp = '\0'; \
2600	\| (yy_c_buf_p) = yy_cp;
2601	\|
2602	\| #define YY_NUM_RULES 8
2603	\| #define YY_END_OF_BUFFER 9
2604	\| /* This struct is not used in this scanner,
2605	\| but its presence is necessary. */
2606	\| struct yy_trans_info
2607	\| {
2608	\| flex_int32_t yy_verify;
2609	\| flex_int32_t yy_nxt;
2610	\| };
2611	\| static yyconst flex_int16_t yy_acclist[23] =
2612	\| { 0,
2613	\| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
2614	\| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
2615	\| 7, 8
2616	\| } ;
2617	\|
2618	\| static yyconst flex_int16_t yy_accept[14] =
2619	\| { 0,
2620	\| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
2621	\| 20, 23, 23
2622	\| } ;
2623	\|
2624	\| static yyconst flex_int32_t yy_ec[256] =
2625	\| { 0,
2626	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
2627	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2628	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2629	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2630	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2631	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2632	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2633	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2634	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2635	\| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
2636	\|
2637	\| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
2638	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2639	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2640	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2641	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2642	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2643	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2644	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2645	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2646	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2647	\|
2648	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2649	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2650	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2651	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2652	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2653	\| 1, 1, 1, 1, 1
2654	\| } ;
2655	\|
2656	\| static yyconst flex_int32_t yy_meta[9] =
2657	\| { 0,
2658	\| 1, 1, 1, 1, 1, 1, 1, 1
2659	\| } ;
2660	\|
2661	\| static yyconst flex_int16_t yy_base[13] =
2662	\| { 0,
2663	\| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
2664	\| 10, 10
2665	\| } ;
2666	\|
2667	\| static yyconst flex_int16_t yy_def[13] =
2668	\| { 0,
2669	\| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
2670	\| 12, 0
2671	\| } ;
2672	\|
2673	\| static yyconst flex_int16_t yy_nxt[19] =
2674	\| { 0,
2675	\| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
2676	\| 12, 12, 12, 12, 12, 12, 12, 12
2677	\| } ;
2678	\|
2679	\| static yyconst flex_int16_t yy_chk[19] =
2680	\| { 0,
2681	\| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
2682	\| 12, 12, 12, 12, 12, 12, 12, 12
2683	\| } ;
2684	\|
2685	\| extern int yy_flex_debug;
2686	\| int yy_flex_debug = 0;
2687	\|
2688	\| static yy_state_type yy_state_buf=0, yy_state_ptr=0;
2689	\| static char *yy_full_match;
2690	\| static int yy_lp;
2691	\| #define REJECT \
2692	\| { \
2693	\| yy_cp = (yy_hold_char); / undo effects of setting up yytext */ \
2694	\| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
2695	\| ++(yy_lp); \
2696	\| goto find_rule; \
2697	\| }
2698	\|
2699	\| static int yy_more_flag = 0;
2700	\| static int yy_more_len = 0;
2701	\| #define yymore() ((yy_more_flag) = 1)
2702	\| #define YY_MORE_ADJ (yy_more_len)
2703	\| #define YY_RESTORE_YY_MORE_OFFSET
2704	\| char *yytext;
2705	\| #line 1 "conftest.l"
2706	\| #line 469 "lex.yy.c"
2707	\|
2708	\| #define INITIAL 0
2709	\|
2710	\| #ifndef YY_NO_UNISTD_H
2711	\| /* Special case for "unistd.h", since it is non-ANSI. We include it way
2712	\| * down here because we want the user's section 1 to have been scanned first.
2713	\| * The user has a chance to override it with an option.
2714	\| */
2715	\| #include <unistd.h>
2716	\| #endif
2717	\|
2718	\| #ifndef YY_EXTRA_TYPE
2719	\| #define YY_EXTRA_TYPE void *
2720	\| #endif
2721	\|
2722	\| static int yy_init_globals (void );
2723	\|
2724	\| /* Accessor methods to globals.
2725	\| These are made visible to non-reentrant scanners for convenience. */
2726	\|
2727	\| int yylex_destroy (void );
2728	\|
2729	\| int yyget_debug (void );
2730	\|
2731	\| void yyset_debug (int debug_flag );
2732	\|
2733	\| YY_EXTRA_TYPE yyget_extra (void );
2734	\|
2735	\| void yyset_extra (YY_EXTRA_TYPE user_defined );
2736	\|
2737	\| FILE *yyget_in (void );
2738	\|
2739	\| void yyset_in (FILE * in_str );
2740	\|
2741	\| FILE *yyget_out (void );
2742	\|
2743	\| void yyset_out (FILE * out_str );
2744	\|
2745	\| yy_size_t yyget_leng (void );
2746	\|
2747	\| char *yyget_text (void );
2748	\|
2749	\| int yyget_lineno (void );
2750	\|
2751	\| void yyset_lineno (int line_number );
2752	\|
2753	\| /* Macros after this point can all be overridden by user definitions in
2754	\| * section 1.
2755	\| */
2756	\|
2757	\| #ifndef YY_SKIP_YYWRAP
2758	\| #ifdef __cplusplus
2759	\| extern "C" int yywrap (void );
2760	\| #else
2761	\| extern int yywrap (void );
2762	\| #endif
2763	\| #endif
2764	\|
2765	\| static void yyunput (int c,char *buf_ptr );
2766	\|
2767	\| #ifndef yytext_ptr
2768	\| static void yy_flex_strncpy (char ,yyconst char ,int );
2769	\| #endif
2770	\|
2771	\| #ifdef YY_NEED_STRLEN
2772	\| static int yy_flex_strlen (yyconst char * );
2773	\| #endif
2774	\|
2775	\| #ifndef YY_NO_INPUT
2776	\|
2777	\| #ifdef __cplusplus
2778	\| static int yyinput (void );
2779	\| #else
2780	\| static int input (void );
2781	\| #endif
2782	\|
2783	\| #endif
2784	\|
2785	\| /* Amount of stuff to slurp up with each read. */
2786	\| #ifndef YY_READ_BUF_SIZE
2787	\| #define YY_READ_BUF_SIZE 8192
2788	\| #endif
2789	\|
2790	\| /* Copy whatever the last rule matched to the standard output. */
2791	\| #ifndef ECHO
2792	\| /* This used to be an fputs(), but since the string might contain NUL's,
2793	\| * we now use fwrite().
2794	\| */
2795	\| #define ECHO fwrite( yytext, yyleng, 1, yyout )
2796	\| #endif
2797	\|
2798	\| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
2799	\| * is returned in "result".
2800	\| */
2801	\| #ifndef YY_INPUT
2802	\| #define YY_INPUT(buf,result,max_size) \
2803	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
2804	\| { \
2805	\| int c = '*'; \
2806	\| yy_size_t n; \
2807	\| for ( n = 0; n < max_size && \
2808	\| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
2809	\| buf[n] = (char) c; \
2810	\| if ( c == '\n' ) \
2811	\| buf[n++] = (char) c; \
2812	\| if ( c == EOF && ferror( yyin ) ) \
2813	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
2814	\| result = n; \
2815	\| } \
2816	\| else \
2817	\| { \
2818	\| errno=0; \
2819	\| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
2820	\| { \
2821	\| if( errno != EINTR) \
2822	\| { \
2823	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
2824	\| break; \
2825	\| } \
2826	\| errno=0; \
2827	\| clearerr(yyin); \
2828	\| } \
2829	\| }\
2830	\| \
2831	\|
2832	\| #endif
2833	\|
2834	\| /* No semi-colon after return; correct usage is to write "yyterminate();" -
2835	\| * we don't want an extra ';' after the "return" because that will cause
2836	\| * some compilers to complain about unreachable statements.
2837	\| */
2838	\| #ifndef yyterminate
2839	\| #define yyterminate() return YY_NULL
2840	\| #endif
2841	\|
2842	\| /* Number of entries by which start-condition stack grows. */
2843	\| #ifndef YY_START_STACK_INCR
2844	\| #define YY_START_STACK_INCR 25
2845	\| #endif
2846	\|
2847	\| /* Report a fatal error. */
2848	\| #ifndef YY_FATAL_ERROR
2849	\| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
2850	\| #endif
2851	\|
2852	\| /* end tables serialization structures and prototypes */
2853	\|
2854	\| /* Default declaration of generated scanner - a define so the user can
2855	\| * easily add parameters.
2856	\| */
2857	\| #ifndef YY_DECL
2858	\| #define YY_DECL_IS_OURS 1
2859	\|
2860	\| extern int yylex (void);
2861	\|
2862	\| #define YY_DECL int yylex (void)
2863	\| #endif /* !YY_DECL */
2864	\|
2865	\| /* Code executed at the beginning of each rule, after yytext and yyleng
2866	\| * have been set up.
2867	\| */
2868	\| #ifndef YY_USER_ACTION
2869	\| #define YY_USER_ACTION
2870	\| #endif
2871	\|
2872	\| /* Code executed at the end of each rule. */
2873	\| #ifndef YY_BREAK
2874	\| #define YY_BREAK break;
2875	\| #endif
2876	\|
2877	\| #define YY_RULE_SETUP \
2878	\| YY_USER_ACTION
2879	\|
2880	\| /** The main scanner function which does all the work.
2881	\| */
2882	\| YY_DECL
2883	\| {
2884	\| register yy_state_type yy_current_state;
2885	\| register char yy_cp, yy_bp;
2886	\| register int yy_act;
2887	\|
2888	\| #line 1 "conftest.l"
2889	\|
2890	\| #line 653 "lex.yy.c"
2891	\|
2892	\| if ( !(yy_init) )
2893	\| {
2894	\| (yy_init) = 1;
2895	\|
2896	\| #ifdef YY_USER_INIT
2897	\| YY_USER_INIT;
2898	\| #endif
2899	\|
2900	\| /* Create the reject buffer large enough to save one state per allowed character. */
2901	\| if ( ! (yy_state_buf) )
2902	\| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
2903	\| if ( ! (yy_state_buf) )
2904	\| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
2905	\|
2906	\| if ( ! (yy_start) )
2907	\| (yy_start) = 1; /* first start state */
2908	\|
2909	\| if ( ! yyin )
2910	\| yyin = stdin;
2911	\|
2912	\| if ( ! yyout )
2913	\| yyout = stdout;
2914	\|
2915	\| if ( ! YY_CURRENT_BUFFER ) {
2916	\| yyensure_buffer_stack ();
2917	\| YY_CURRENT_BUFFER_LVALUE =
2918	\| yy_create_buffer(yyin,YY_BUF_SIZE );
2919	\| }
2920	\|
2921	\| yy_load_buffer_state( );
2922	\| }
2923	\|
2924	\| while ( 1 ) /* loops until end-of-file is reached */
2925	\| {
2926	\| (yy_more_len) = 0;
2927	\| if ( (yy_more_flag) )
2928	\| {
2929	\| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
2930	\| (yy_more_flag) = 0;
2931	\| }
2932	\| yy_cp = (yy_c_buf_p);
2933	\|
2934	\| /* Support of yytext. */
2935	\| *yy_cp = (yy_hold_char);
2936	\|
2937	\| /* yy_bp points to the position in yy_ch_buf of the start of
2938	\| * the current run.
2939	\| */
2940	\| yy_bp = yy_cp;
2941	\|
2942	\| yy_current_state = (yy_start);
2943	\|
2944	\| (yy_state_ptr) = (yy_state_buf);
2945	\| *(yy_state_ptr)++ = yy_current_state;
2946	\|
2947	\| yy_match:
2948	\| do
2949	\| {
2950	\| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
2951	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
2952	\| {
2953	\| yy_current_state = (int) yy_def[yy_current_state];
2954	\| if ( yy_current_state >= 13 )
2955	\| yy_c = yy_meta[(unsigned int) yy_c];
2956	\| }
2957	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
2958	\| *(yy_state_ptr)++ = yy_current_state;
2959	\| ++yy_cp;
2960	\| }
2961	\| while ( yy_base[yy_current_state] != 10 );
2962	\|
2963	\| yy_find_action:
2964	\| yy_current_state = *--(yy_state_ptr);
2965	\| (yy_lp) = yy_accept[yy_current_state];
2966	\| goto find_rule; /* Shut up GCC warning -Wall */
2967	\| find_rule: /* we branch to this label when backing up */
2968	\| for ( ; ; ) /* until we find what rule we matched */
2969	\| {
2970	\| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
2971	\| {
2972	\| yy_act = yy_acclist[(yy_lp)];
2973	\| {
2974	\| (yy_full_match) = yy_cp;
2975	\| break;
2976	\| }
2977	\| }
2978	\| --yy_cp;
2979	\| yy_current_state = *--(yy_state_ptr);
2980	\| (yy_lp) = yy_accept[yy_current_state];
2981	\| }
2982	\|
2983	\| YY_DO_BEFORE_ACTION;
2984	\|
2985	\| do_action: /* This label is used only to access EOF actions. */
2986	\|
2987	\| switch ( yy_act )
2988	\| { /* beginning of action switch */
2989	\| case 1:
2990	\| YY_RULE_SETUP
2991	\| #line 2 "conftest.l"
2992	\| { ECHO; }
2993	\| YY_BREAK
2994	\| case 2:
2995	\| YY_RULE_SETUP
2996	\| #line 3 "conftest.l"
2997	\| { REJECT; }
2998	\| YY_BREAK
2999	\| case 3:
3000	\| YY_RULE_SETUP
3001	\| #line 4 "conftest.l"
3002	\| { yymore (); }
3003	\| YY_BREAK
3004	\| case 4:
3005	\| YY_RULE_SETUP
3006	\| #line 5 "conftest.l"
3007	\| { yyless (1); }
3008	\| YY_BREAK
3009	\| case 5:
3010	\| YY_RULE_SETUP
3011	\| #line 6 "conftest.l"
3012	\| { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
3013	\| yyless ((input () != 0)); }
3014	\| YY_BREAK
3015	\| case 6:
3016	\| YY_RULE_SETUP
3017	\| #line 8 "conftest.l"
3018	\| { unput (yytext[0]); }
3019	\| YY_BREAK
3020	\| case 7:
3021	\| YY_RULE_SETUP
3022	\| #line 9 "conftest.l"
3023	\| { BEGIN INITIAL; }
3024	\| YY_BREAK
3025	\| case 8:
3026	\| YY_RULE_SETUP
3027	\| #line 10 "conftest.l"
3028	\| ECHO;
3029	\| YY_BREAK
3030	\| #line 793 "lex.yy.c"
3031	\| case YY_STATE_EOF(INITIAL):
3032	\| yyterminate();
3033	\|
3034	\| case YY_END_OF_BUFFER:
3035	\| {
3036	\| /* Amount of text matched not including the EOB char. */
3037	\| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
3038	\|
3039	\| /* Undo the effects of YY_DO_BEFORE_ACTION. */
3040	\| *yy_cp = (yy_hold_char);
3041	\| YY_RESTORE_YY_MORE_OFFSET
3042	\|
3043	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
3044	\| {
3045	\| /* We're scanning a new file or input source. It's
3046	\| * possible that this happened because the user
3047	\| * just pointed yyin at a new source and called
3048	\| * yylex(). If so, then we have to assure
3049	\| * consistency between YY_CURRENT_BUFFER and our
3050	\| * globals. Here is the right place to do so, because
3051	\| * this is the first action (other than possibly a
3052	\| * back-up) that will match for the new input source.
3053	\| */
3054	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
3055	\| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
3056	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
3057	\| }
3058	\|
3059	\| /* Note that here we test for yy_c_buf_p "<=" to the position
3060	\| * of the first EOB in the buffer, since yy_c_buf_p will
3061	\| * already have been incremented past the NUL character
3062	\| * (since all states make transitions on EOB to the
3063	\| * end-of-buffer state). Contrast this with the test
3064	\| * in input().
3065	\| */
3066	\| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
3067	\| { /* This was really a NUL. */
3068	\| yy_state_type yy_next_state;
3069	\|
3070	\| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
3071	\|
3072	\| yy_current_state = yy_get_previous_state( );
3073	\|
3074	\| /* Okay, we're now positioned to make the NUL
3075	\| * transition. We couldn't have
3076	\| * yy_get_previous_state() go ahead and do it
3077	\| * for us because it doesn't know how to deal
3078	\| * with the possibility of jamming (and we don't
3079	\| * want to build jamming into it because then it
3080	\| * will run more slowly).
3081	\| */
3082	\|
3083	\| yy_next_state = yy_try_NUL_trans( yy_current_state );
3084	\|
3085	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
3086	\|
3087	\| if ( yy_next_state )
3088	\| {
3089	\| /* Consume the NUL. */
3090	\| yy_cp = ++(yy_c_buf_p);
3091	\| yy_current_state = yy_next_state;
3092	\| goto yy_match;
3093	\| }
3094	\|
3095	\| else
3096	\| {
3097	\| yy_cp = (yy_c_buf_p);
3098	\| goto yy_find_action;
3099	\| }
3100	\| }
3101	\|
3102	\| else switch ( yy_get_next_buffer( ) )
3103	\| {
3104	\| case EOB_ACT_END_OF_FILE:
3105	\| {
3106	\| (yy_did_buffer_switch_on_eof) = 0;
3107	\|
3108	\| if ( yywrap( ) )
3109	\| {
3110	\| /* Note: because we've taken care in
3111	\| * yy_get_next_buffer() to have set up
3112	\| * yytext, we can now set up
3113	\| * yy_c_buf_p so that if some total
3114	\| * hoser (like flex itself) wants to
3115	\| * call the scanner after we return the
3116	\| * YY_NULL, it'll still work - another
3117	\| * YY_NULL will get returned.
3118	\| */
3119	\| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
3120	\|
3121	\| yy_act = YY_STATE_EOF(YY_START);
3122	\| goto do_action;
3123	\| }
3124	\|
3125	\| else
3126	\| {
3127	\| if ( ! (yy_did_buffer_switch_on_eof) )
3128	\| YY_NEW_FILE;
3129	\| }
3130	\| break;
3131	\| }
3132	\|
3133	\| case EOB_ACT_CONTINUE_SCAN:
3134	\| (yy_c_buf_p) =
3135	\| (yytext_ptr) + yy_amount_of_matched_text;
3136	\|
3137	\| yy_current_state = yy_get_previous_state( );
3138	\|
3139	\| yy_cp = (yy_c_buf_p);
3140	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
3141	\| goto yy_match;
3142	\|
3143	\| case EOB_ACT_LAST_MATCH:
3144	\| (yy_c_buf_p) =
3145	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
3146	\|
3147	\| yy_current_state = yy_get_previous_state( );
3148	\|
3149	\| yy_cp = (yy_c_buf_p);
3150	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
3151	\| goto yy_find_action;
3152	\| }
3153	\| break;
3154	\| }
3155	\|
3156	\| default:
3157	\| YY_FATAL_ERROR(
3158	\| "fatal flex scanner internal error--no action found" );
3159	\| } /* end of action switch */
3160	\| } /* end of scanning one token */
3161	\| } /* end of yylex */
3162	\|
3163	\| /* yy_get_next_buffer - try to read in a new buffer
3164	\| *
3165	\| * Returns a code representing an action:
3166	\| * EOB_ACT_LAST_MATCH -
3167	\| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
3168	\| * EOB_ACT_END_OF_FILE - end of file
3169	\| */
3170	\| static int yy_get_next_buffer (void)
3171	\| {
3172	\| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
3173	\| register char *source = (yytext_ptr);
3174	\| register int number_to_move, i;
3175	\| int ret_val;
3176	\|
3177	\| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
3178	\| YY_FATAL_ERROR(
3179	\| "fatal flex scanner internal error--end of buffer missed" );
3180	\|
3181	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
3182	\| { /* Don't try to fill the buffer, so this is an EOF. */
3183	\| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
3184	\| {
3185	\| /* We matched a single character, the EOB, so
3186	\| * treat this as a final EOF.
3187	\| */
3188	\| return EOB_ACT_END_OF_FILE;
3189	\| }
3190	\|
3191	\| else
3192	\| {
3193	\| /* We matched some text prior to the EOB, first
3194	\| * process it.
3195	\| */
3196	\| return EOB_ACT_LAST_MATCH;
3197	\| }
3198	\| }
3199	\|
3200	\| /* Try to read more data. */
3201	\|
3202	\| /* First move last chars to start of buffer. */
3203	\| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
3204	\|
3205	\| for ( i = 0; i < number_to_move; ++i )
3206	\| (dest++) = (source++);
3207	\|
3208	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
3209	\| /* don't do the read, it's not guaranteed to return an EOF,
3210	\| * just force an EOF
3211	\| */
3212	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
3213	\|
3214	\| else
3215	\| {
3216	\| yy_size_t num_to_read =
3217	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
3218	\|
3219	\| while ( num_to_read <= 0 )
3220	\| { /* Not enough room in the buffer - grow it. */
3221	\|
3222	\| YY_FATAL_ERROR(
3223	\| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
3224	\|
3225	\| }
3226	\|
3227	\| if ( num_to_read > YY_READ_BUF_SIZE )
3228	\| num_to_read = YY_READ_BUF_SIZE;
3229	\|
3230	\| /* Read in more data. */
3231	\| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
3232	\| (yy_n_chars), num_to_read );
3233	\|
3234	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
3235	\| }
3236	\|
3237	\| if ( (yy_n_chars) == 0 )
3238	\| {
3239	\| if ( number_to_move == YY_MORE_ADJ )
3240	\| {
3241	\| ret_val = EOB_ACT_END_OF_FILE;
3242	\| yyrestart(yyin );
3243	\| }
3244	\|
3245	\| else
3246	\| {
3247	\| ret_val = EOB_ACT_LAST_MATCH;
3248	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
3249	\| YY_BUFFER_EOF_PENDING;
3250	\| }
3251	\| }
3252	\|
3253	\| else
3254	\| ret_val = EOB_ACT_CONTINUE_SCAN;
3255	\|
3256	\| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
3257	\| /* Extend the array by 50%, plus the number we really need. */
3258	\| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
3259	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char ) yyrealloc((void ) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
3260	\| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
3261	\| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
3262	\| }
3263	\|
3264	\| (yy_n_chars) += number_to_move;
3265	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
3266	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
3267	\|
3268	\| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
3269	\|
3270	\| return ret_val;
3271	\| }
3272	\|
3273	\| /* yy_get_previous_state - get the state just before the EOB char was reached */
3274	\|
3275	\| static yy_state_type yy_get_previous_state (void)
3276	\| {
3277	\| register yy_state_type yy_current_state;
3278	\| register char *yy_cp;
3279	\|
3280	\| yy_current_state = (yy_start);
3281	\|
3282	\| (yy_state_ptr) = (yy_state_buf);
3283	\| *(yy_state_ptr)++ = yy_current_state;
3284	\|
3285	\| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
3286	\| {
3287	\| register YY_CHAR yy_c = (yy_cp ? yy_ec[YY_SC_TO_UI(yy_cp)] : 1);
3288	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
3289	\| {
3290	\| yy_current_state = (int) yy_def[yy_current_state];
3291	\| if ( yy_current_state >= 13 )
3292	\| yy_c = yy_meta[(unsigned int) yy_c];
3293	\| }
3294	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
3295	\| *(yy_state_ptr)++ = yy_current_state;
3296	\| }
3297	\|
3298	\| return yy_current_state;
3299	\| }
3300	\|
3301	\| /* yy_try_NUL_trans - try to make a transition on the NUL character
3302	\| *
3303	\| * synopsis
3304	\| * next_state = yy_try_NUL_trans( current_state );
3305	\| */
3306	\| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
3307	\| {
3308	\| register int yy_is_jam;
3309	\|
3310	\| register YY_CHAR yy_c = 1;
3311	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
3312	\| {
3313	\| yy_current_state = (int) yy_def[yy_current_state];
3314	\| if ( yy_current_state >= 13 )
3315	\| yy_c = yy_meta[(unsigned int) yy_c];
3316	\| }
3317	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
3318	\| yy_is_jam = (yy_current_state == 12);
3319	\| if ( ! yy_is_jam )
3320	\| *(yy_state_ptr)++ = yy_current_state;
3321	\|
3322	\| return yy_is_jam ? 0 : yy_current_state;
3323	\| }
3324	\|
3325	\| static void yyunput (int c, register char * yy_bp )
3326	\| {
3327	\| register char *yy_cp;
3328	\|
3329	\| yy_cp = (yy_c_buf_p);
3330	\|
3331	\| /* undo effects of setting up yytext */
3332	\| *yy_cp = (yy_hold_char);
3333	\|
3334	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
3335	\| { /* need to shift things up to make room */
3336	\| /* +2 for EOB chars. */
3337	\| register yy_size_t number_to_move = (yy_n_chars) + 2;
3338	\| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
3339	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
3340	\| register char *source =
3341	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
3342	\|
3343	\| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
3344	\| --dest = --source;
3345	\|
3346	\| yy_cp += (int) (dest - source);
3347	\| yy_bp += (int) (dest - source);
3348	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
3349	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
3350	\|
3351	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
3352	\| YY_FATAL_ERROR( "flex scanner push-back overflow" );
3353	\| }
3354	\|
3355	\| *--yy_cp = (char) c;
3356	\|
3357	\| (yytext_ptr) = yy_bp;
3358	\| (yy_hold_char) = *yy_cp;
3359	\| (yy_c_buf_p) = yy_cp;
3360	\| }
3361	\|
3362	\| #ifndef YY_NO_INPUT
3363	\| #ifdef __cplusplus
3364	\| static int yyinput (void)
3365	\| #else
3366	\| static int input (void)
3367	\| #endif
3368	\|
3369	\| {
3370	\| int c;
3371	\|
3372	\| *(yy_c_buf_p) = (yy_hold_char);
3373	\|
3374	\| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
3375	\| {
3376	\| /* yy_c_buf_p now points to the character we want to return.
3377	\| * If this occurs before the EOB characters, then it's a
3378	\| * valid NUL; if not, then we've hit the end of the buffer.
3379	\| */
3380	\| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
3381	\| /* This was really a NUL. */
3382	\| *(yy_c_buf_p) = '\0';
3383	\|
3384	\| else
3385	\| { /* need more input */
3386	\| yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
3387	\| ++(yy_c_buf_p);
3388	\|
3389	\| switch ( yy_get_next_buffer( ) )
3390	\| {
3391	\| case EOB_ACT_LAST_MATCH:
3392	\| /* This happens because yy_g_n_b()
3393	\| * sees that we've accumulated a
3394	\| * token and flags that we need to
3395	\| * try matching the token before
3396	\| * proceeding. But for input(),
3397	\| * there's no matching to consider.
3398	\| * So convert the EOB_ACT_LAST_MATCH
3399	\| * to EOB_ACT_END_OF_FILE.
3400	\| */
3401	\|
3402	\| /* Reset buffer status. */
3403	\| yyrestart(yyin );
3404	\|
3405	\| /FALLTHROUGH/
3406	\|
3407	\| case EOB_ACT_END_OF_FILE:
3408	\| {
3409	\| if ( yywrap( ) )
3410	\| return 0;
3411	\|
3412	\| if ( ! (yy_did_buffer_switch_on_eof) )
3413	\| YY_NEW_FILE;
3414	\| #ifdef __cplusplus
3415	\| return yyinput();
3416	\| #else
3417	\| return input();
3418	\| #endif
3419	\| }
3420	\|
3421	\| case EOB_ACT_CONTINUE_SCAN:
3422	\| (yy_c_buf_p) = (yytext_ptr) + offset;
3423	\| break;
3424	\| }
3425	\| }
3426	\| }
3427	\|
3428	\| c = (unsigned char ) (yy_c_buf_p); /* cast for 8-bit char's */
3429	\| (yy_c_buf_p) = '\0'; / preserve yytext */
3430	\| (yy_hold_char) = *++(yy_c_buf_p);
3431	\|
3432	\| return c;
3433	\| }
3434	\| #endif /* ifndef YY_NO_INPUT */
3435	\|
3436	\| /** Immediately switch to a different input stream.
3437	\| * @param input_file A readable stream.
3438	\| *
3439	\| * @note This function does not reset the start condition to @c INITIAL .
3440	\| */
3441	\| void yyrestart (FILE * input_file )
3442	\| {
3443	\|
3444	\| if ( ! YY_CURRENT_BUFFER ){
3445	\| yyensure_buffer_stack ();
3446	\| YY_CURRENT_BUFFER_LVALUE =
3447	\| yy_create_buffer(yyin,YY_BUF_SIZE );
3448	\| }
3449	\|
3450	\| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
3451	\| yy_load_buffer_state( );
3452	\| }
3453	\|
3454	\| /** Switch to a different input buffer.
3455	\| * @param new_buffer The new input buffer.
3456	\| *
3457	\| */
3458	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
3459	\| {
3460	\|
3461	\| /* TODO. We should be able to replace this entire function body
3462	\| * with
3463	\| * yypop_buffer_state();
3464	\| * yypush_buffer_state(new_buffer);
3465	\| */
3466	\| yyensure_buffer_stack ();
3467	\| if ( YY_CURRENT_BUFFER == new_buffer )
3468	\| return;
3469	\|
3470	\| if ( YY_CURRENT_BUFFER )
3471	\| {
3472	\| /* Flush out information for old buffer. */
3473	\| *(yy_c_buf_p) = (yy_hold_char);
3474	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
3475	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
3476	\| }
3477	\|
3478	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
3479	\| yy_load_buffer_state( );
3480	\|
3481	\| /* We don't actually know whether we did this switch during
3482	\| * EOF (yywrap()) processing, but the only time this flag
3483	\| * is looked at is after yywrap() is called, so it's safe
3484	\| * to go ahead and always set it.
3485	\| */
3486	\| (yy_did_buffer_switch_on_eof) = 1;
3487	\| }
3488	\|
3489	\| static void yy_load_buffer_state (void)
3490	\| {
3491	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
3492	\| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
3493	\| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
3494	\| (yy_hold_char) = *(yy_c_buf_p);
3495	\| }
3496	\|
3497	\| /** Allocate and initialize an input buffer state.
3498	\| * @param file A readable stream.
3499	\| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
3500	\| *
3501	\| * @return the allocated buffer state.
3502	\| */
3503	\| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
3504	\| {
3505	\| YY_BUFFER_STATE b;
3506	\|
3507	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
3508	\| if ( ! b )
3509	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
3510	\|
3511	\| b->yy_buf_size = size;
3512	\|
3513	\| /* yy_ch_buf has to be 2 characters longer than the size given because
3514	\| * we need to put in 2 end-of-buffer characters.
3515	\| */
3516	\| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
3517	\| if ( ! b->yy_ch_buf )
3518	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
3519	\|
3520	\| b->yy_is_our_buffer = 1;
3521	\|
3522	\| yy_init_buffer(b,file );
3523	\|
3524	\| return b;
3525	\| }
3526	\|
3527	\| /** Destroy the buffer.
3528	\| * @param b a buffer created with yy_create_buffer()
3529	\| *
3530	\| */
3531	\| void yy_delete_buffer (YY_BUFFER_STATE b )
3532	\| {
3533	\|
3534	\| if ( ! b )
3535	\| return;
3536	\|
3537	\| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
3538	\| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
3539	\|
3540	\| if ( b->yy_is_our_buffer )
3541	\| yyfree((void *) b->yy_ch_buf );
3542	\|
3543	\| yyfree((void *) b );
3544	\| }
3545	\|
3546	\| #ifndef __cplusplus
3547	\| extern int isatty (int );
3548	\| #endif /* __cplusplus */
3549	\|
3550	\| /* Initializes or reinitializes a buffer.
3551	\| * This function is sometimes called more than once on the same buffer,
3552	\| * such as during a yyrestart() or at EOF.
3553	\| */
3554	\| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
3555	\|
3556	\| {
3557	\| int oerrno = errno;
3558	\|
3559	\| yy_flush_buffer(b );
3560	\|
3561	\| b->yy_input_file = file;
3562	\| b->yy_fill_buffer = 1;
3563	\|
3564	\| /* If b is the current buffer, then yy_init_buffer was _probably_
3565	\| * called from yyrestart() or through yy_get_next_buffer.
3566	\| * In that case, we don't want to reset the lineno or column.
3567	\| */
3568	\| if (b != YY_CURRENT_BUFFER){
3569	\| b->yy_bs_lineno = 1;
3570	\| b->yy_bs_column = 0;
3571	\| }
3572	\|
3573	\| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
3574	\|
3575	\| errno = oerrno;
3576	\| }
3577	\|
3578	\| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
3579	\| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
3580	\| *
3581	\| */
3582	\| void yy_flush_buffer (YY_BUFFER_STATE b )
3583	\| {
3584	\| if ( ! b )
3585	\| return;
3586	\|
3587	\| b->yy_n_chars = 0;
3588	\|
3589	\| /* We always need two end-of-buffer characters. The first causes
3590	\| * a transition to the end-of-buffer state. The second causes
3591	\| * a jam in that state.
3592	\| */
3593	\| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
3594	\| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
3595	\|
3596	\| b->yy_buf_pos = &b->yy_ch_buf[0];
3597	\|
3598	\| b->yy_at_bol = 1;
3599	\| b->yy_buffer_status = YY_BUFFER_NEW;
3600	\|
3601	\| if ( b == YY_CURRENT_BUFFER )
3602	\| yy_load_buffer_state( );
3603	\| }
3604	\|
3605	\| /** Pushes the new state onto the stack. The new state becomes
3606	\| * the current state. This function will allocate the stack
3607	\| * if necessary.
3608	\| * @param new_buffer The new state.
3609	\| *
3610	\| */
3611	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
3612	\| {
3613	\| if (new_buffer == NULL)
3614	\| return;
3615	\|
3616	\| yyensure_buffer_stack();
3617	\|
3618	\| /* This block is copied from yy_switch_to_buffer. */
3619	\| if ( YY_CURRENT_BUFFER )
3620	\| {
3621	\| /* Flush out information for old buffer. */
3622	\| *(yy_c_buf_p) = (yy_hold_char);
3623	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
3624	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
3625	\| }
3626	\|
3627	\| /* Only push if top exists. Otherwise, replace top. */
3628	\| if (YY_CURRENT_BUFFER)
3629	\| (yy_buffer_stack_top)++;
3630	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
3631	\|
3632	\| /* copied from yy_switch_to_buffer. */
3633	\| yy_load_buffer_state( );
3634	\| (yy_did_buffer_switch_on_eof) = 1;
3635	\| }
3636	\|
3637	\| /** Removes and deletes the top of the stack, if present.
3638	\| * The next element becomes the new top.
3639	\| *
3640	\| */
3641	\| void yypop_buffer_state (void)
3642	\| {
3643	\| if (!YY_CURRENT_BUFFER)
3644	\| return;
3645	\|
3646	\| yy_delete_buffer(YY_CURRENT_BUFFER );
3647	\| YY_CURRENT_BUFFER_LVALUE = NULL;
3648	\| if ((yy_buffer_stack_top) > 0)
3649	\| --(yy_buffer_stack_top);
3650	\|
3651	\| if (YY_CURRENT_BUFFER) {
3652	\| yy_load_buffer_state( );
3653	\| (yy_did_buffer_switch_on_eof) = 1;
3654	\| }
3655	\| }
3656	\|
3657	\| /* Allocates the stack if it does not exist.
3658	\| * Guarantees space for at least one push.
3659	\| */
3660	\| static void yyensure_buffer_stack (void)
3661	\| {
3662	\| yy_size_t num_to_alloc;
3663	\|
3664	\| if (!(yy_buffer_stack)) {
3665	\|
3666	\| /* First allocation is just for 2 elements, since we don't know if this
3667	\| * scanner will even need a stack. We use 2 instead of 1 to avoid an
3668	\| * immediate realloc on the next call.
3669	\| */
3670	\| num_to_alloc = 1;
3671	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
3672	\| (num_to_alloc * sizeof(struct yy_buffer_state*)
3673	\| );
3674	\| if ( ! (yy_buffer_stack) )
3675	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
3676	\|
3677	\| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
3678	\|
3679	\| (yy_buffer_stack_max) = num_to_alloc;
3680	\| (yy_buffer_stack_top) = 0;
3681	\| return;
3682	\| }
3683	\|
3684	\| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
3685	\|
3686	\| /* Increase the buffer to prepare for a possible push. */
3687	\| int grow_size = 8 /* arbitrary grow size */;
3688	\|
3689	\| num_to_alloc = (yy_buffer_stack_max) + grow_size;
3690	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
3691	\| ((yy_buffer_stack),
3692	\| num_to_alloc * sizeof(struct yy_buffer_state*)
3693	\| );
3694	\| if ( ! (yy_buffer_stack) )
3695	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
3696	\|
3697	\| /* zero only the new slots.*/
3698	\| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
3699	\| (yy_buffer_stack_max) = num_to_alloc;
3700	\| }
3701	\| }
3702	\|
3703	\| /** Setup the input buffer state to scan directly from a user-specified character buffer.
3704	\| * @param base the character buffer
3705	\| * @param size the size in bytes of the character buffer
3706	\| *
3707	\| * @return the newly allocated buffer state object.
3708	\| */
3709	\| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
3710	\| {
3711	\| YY_BUFFER_STATE b;
3712	\|
3713	\| if ( size < 2 \|\|
3714	\| base[size-2] != YY_END_OF_BUFFER_CHAR \|\|
3715	\| base[size-1] != YY_END_OF_BUFFER_CHAR )
3716	\| /* They forgot to leave room for the EOB's. */
3717	\| return 0;
3718	\|
3719	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
3720	\| if ( ! b )
3721	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
3722	\|
3723	\| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
3724	\| b->yy_buf_pos = b->yy_ch_buf = base;
3725	\| b->yy_is_our_buffer = 0;
3726	\| b->yy_input_file = 0;
3727	\| b->yy_n_chars = b->yy_buf_size;
3728	\| b->yy_is_interactive = 0;
3729	\| b->yy_at_bol = 1;
3730	\| b->yy_fill_buffer = 0;
3731	\| b->yy_buffer_status = YY_BUFFER_NEW;
3732	\|
3733	\| yy_switch_to_buffer(b );
3734	\|
3735	\| return b;
3736	\| }
3737	\|
3738	\| /** Setup the input buffer state to scan a string. The next call to yylex() will
3739	\| * scan from a @e copy of @a str.
3740	\| * @param yystr a NUL-terminated string to scan
3741	\| *
3742	\| * @return the newly allocated buffer state object.
3743	\| * @note If you want to scan bytes that may contain NUL values, then use
3744	\| * yy_scan_bytes() instead.
3745	\| */
3746	\| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
3747	\| {
3748	\|
3749	\| return yy_scan_bytes(yystr,strlen(yystr) );
3750	\| }
3751	\|
3752	\| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
3753	\| * scan from a @e copy of @a bytes.
3754	\| * @param bytes the byte buffer to scan
3755	\| * @param len the number of bytes in the buffer pointed to by @a bytes.
3756	\| *
3757	\| * @return the newly allocated buffer state object.
3758	\| */
3759	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
3760	\| {
3761	\| YY_BUFFER_STATE b;
3762	\| char *buf;
3763	\| yy_size_t n, i;
3764	\|
3765	\| /* Get memory for full buffer, including space for trailing EOB's. */
3766	\| n = _yybytes_len + 2;
3767	\| buf = (char *) yyalloc(n );
3768	\| if ( ! buf )
3769	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
3770	\|
3771	\| for ( i = 0; i < _yybytes_len; ++i )
3772	\| buf[i] = yybytes[i];
3773	\|
3774	\| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
3775	\|
3776	\| b = yy_scan_buffer(buf,n );
3777	\| if ( ! b )
3778	\| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
3779	\|
3780	\| /* It's okay to grow etc. this buffer, and we should throw it
3781	\| * away when we're done.
3782	\| */
3783	\| b->yy_is_our_buffer = 1;
3784	\|
3785	\| return b;
3786	\| }
3787	\|
3788	\| #ifndef YY_EXIT_FAILURE
3789	\| #define YY_EXIT_FAILURE 2
3790	\| #endif
3791	\|
3792	\| static void yy_fatal_error (yyconst char* msg )
3793	\| {
3794	\| (void) fprintf( stderr, "%s\n", msg );
3795	\| exit( YY_EXIT_FAILURE );
3796	\| }
3797	\|
3798	\| /* Redefine yyless() so it works in section 3 code. */
3799	\|
3800	\| #undef yyless
3801	\| #define yyless(n) \
3802	\| do \
3803	\| { \
3804	\| /* Undo effects of setting up yytext. */ \
3805	\| int yyless_macro_arg = (n); \
3806	\| YY_LESS_LINENO(yyless_macro_arg);\
3807	\| yytext[yyleng] = (yy_hold_char); \
3808	\| (yy_c_buf_p) = yytext + yyless_macro_arg; \
3809	\| (yy_hold_char) = *(yy_c_buf_p); \
3810	\| *(yy_c_buf_p) = '\0'; \
3811	\| yyleng = yyless_macro_arg; \
3812	\| } \
3813	\| while ( 0 )
3814	\|
3815	\| /* Accessor methods (get/set functions) to struct members. */
3816	\|
3817	\| /** Get the current line number.
3818	\| *
3819	\| */
3820	\| int yyget_lineno (void)
3821	\| {
3822	\|
3823	\| return yylineno;
3824	\| }
3825	\|
3826	\| /** Get the input stream.
3827	\| *
3828	\| */
3829	\| FILE *yyget_in (void)
3830	\| {
3831	\| return yyin;
3832	\| }
3833	\|
3834	\| /** Get the output stream.
3835	\| *
3836	\| */
3837	\| FILE *yyget_out (void)
3838	\| {
3839	\| return yyout;
3840	\| }
3841	\|
3842	\| /** Get the length of the current token.
3843	\| *
3844	\| */
3845	\| yy_size_t yyget_leng (void)
3846	\| {
3847	\| return yyleng;
3848	\| }
3849	\|
3850	\| /** Get the current token.
3851	\| *
3852	\| */
3853	\|
3854	\| char *yyget_text (void)
3855	\| {
3856	\| return yytext;
3857	\| }
3858	\|
3859	\| /** Set the current line number.
3860	\| * @param line_number
3861	\| *
3862	\| */
3863	\| void yyset_lineno (int line_number )
3864	\| {
3865	\|
3866	\| yylineno = line_number;
3867	\| }
3868	\|
3869	\| /** Set the input stream. This does not discard the current
3870	\| * input buffer.
3871	\| * @param in_str A readable stream.
3872	\| *
3873	\| * @see yy_switch_to_buffer
3874	\| */
3875	\| void yyset_in (FILE * in_str )
3876	\| {
3877	\| yyin = in_str ;
3878	\| }
3879	\|
3880	\| void yyset_out (FILE * out_str )
3881	\| {
3882	\| yyout = out_str ;
3883	\| }
3884	\|
3885	\| int yyget_debug (void)
3886	\| {
3887	\| return yy_flex_debug;
3888	\| }
3889	\|
3890	\| void yyset_debug (int bdebug )
3891	\| {
3892	\| yy_flex_debug = bdebug ;
3893	\| }
3894	\|
3895	\| static int yy_init_globals (void)
3896	\| {
3897	\| /* Initialization is the same as for the non-reentrant scanner.
3898	\| * This function is called from yylex_destroy(), so don't allocate here.
3899	\| */
3900	\|
3901	\| (yy_buffer_stack) = 0;
3902	\| (yy_buffer_stack_top) = 0;
3903	\| (yy_buffer_stack_max) = 0;
3904	\| (yy_c_buf_p) = (char *) 0;
3905	\| (yy_init) = 0;
3906	\| (yy_start) = 0;
3907	\|
3908	\| (yy_state_buf) = 0;
3909	\| (yy_state_ptr) = 0;
3910	\| (yy_full_match) = 0;
3911	\| (yy_lp) = 0;
3912	\|
3913	\| /* Defined in main.c */
3914	\| #ifdef YY_STDINIT
3915	\| yyin = stdin;
3916	\| yyout = stdout;
3917	\| #else
3918	\| yyin = (FILE *) 0;
3919	\| yyout = (FILE *) 0;
3920	\| #endif
3921	\|
3922	\| /* For future reference: Set errno on error, since we are called by
3923	\| * yylex_init()
3924	\| */
3925	\| return 0;
3926	\| }
3927	\|
3928	\| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
3929	\| int yylex_destroy (void)
3930	\| {
3931	\|
3932	\| /* Pop the buffer stack, destroying each element. */
3933	\| while(YY_CURRENT_BUFFER){
3934	\| yy_delete_buffer(YY_CURRENT_BUFFER );
3935	\| YY_CURRENT_BUFFER_LVALUE = NULL;
3936	\| yypop_buffer_state();
3937	\| }
3938	\|
3939	\| /* Destroy the stack itself. */
3940	\| yyfree((yy_buffer_stack) );
3941	\| (yy_buffer_stack) = NULL;
3942	\|
3943	\| yyfree ( (yy_state_buf) );
3944	\| (yy_state_buf) = NULL;
3945	\|
3946	\| /* Reset the globals. This is important in a non-reentrant scanner so the next time
3947	\| * yylex() is called, initialization will occur. */
3948	\| yy_init_globals( );
3949	\|
3950	\| return 0;
3951	\| }
3952	\|
3953	\| /*
3954	\| * Internal utility routines.
3955	\| */
3956	\|
3957	\| #ifndef yytext_ptr
3958	\| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
3959	\| {
3960	\| register int i;
3961	\| for ( i = 0; i < n; ++i )
3962	\| s1[i] = s2[i];
3963	\| }
3964	\| #endif
3965	\|
3966	\| #ifdef YY_NEED_STRLEN
3967	\| static int yy_flex_strlen (yyconst char * s )
3968	\| {
3969	\| register int n;
3970	\| for ( n = 0; s[n]; ++n )
3971	\| ;
3972	\|
3973	\| return n;
3974	\| }
3975	\| #endif
3976	\|
3977	\| void *yyalloc (yy_size_t size )
3978	\| {
3979	\| return (void *) malloc( size );
3980	\| }
3981	\|
3982	\| void yyrealloc (void ptr, yy_size_t size )
3983	\| {
3984	\| /* The cast to (char *) in the following accommodates both
3985	\| * implementations that use char* generic pointers, and those
3986	\| * that use void* generic pointers. It works with the latter
3987	\| * because both ANSI C and C++ allow castless assignment from
3988	\| * any pointer type to void*, and deal with argument conversions
3989	\| * as though doing an assignment.
3990	\| */
3991	\| return (void ) realloc( (char ) ptr, size );
3992	\| }
3993	\|
3994	\| void yyfree (void * ptr )
3995	\| {
3996	\| free( (char ) ptr ); / see yyrealloc() for (char ) cast /
3997	\| }
3998	\|
3999	\| #define YYTABLES_NAME "yytables"
4000	\|
4001	\| #line 10 "conftest.l"
4002	\|
4003	\|
4004	\| #ifdef YYTEXT_POINTER
4005	\| extern char *yytext;
4006	\| #endif
4007	\| int
4008	\| main (void)
4009	\| {
4010	\| return ! yylex () + ! yywrap ();
4011	\| }
4012	configure:12249: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c -ll >&5
4013	configure:12249: $? = 0
4014	configure:12259: result: -ll
4015	configure:12265: checking whether yytext is a pointer
4016	configure:12282: /usr/bin/clang -o conftest -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c -ll >&5
4017	configure:12282: $? = 0
4018	configure:12290: result: yes
4019	configure:12308: checking for bison
4020	configure:12324: found /usr/bin/bison
4021	configure:12335: result: bison -y
4022	configure:12374: checking for dlopen in -ldl
4023	configure:12399: /usr/bin/clang -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -pipe -Os -arch x86_64 -I/opt/local/include -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64 conftest.c -ldl >&5
4024	configure:12399: $? = 0
4025	configure:12408: result: yes
4026	configure:12420: checking for the suffix of shared libraries
4027	configure:12431: result: .dylib
4028	configure:12644: checking for GLIB
4029	configure:12651: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.36.0"
4030	Requested 'glib-2.0 >= 2.36.0' but version of GLib is 2.30.2
4031	configure:12654: $? = 1
4032	configure:12668: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.36.0"
4033	Requested 'glib-2.0 >= 2.36.0' but version of GLib is 2.30.2
4034	configure:12671: $? = 1
4035	configure:12685: result: no
4036	Requested 'glib-2.0 >= 2.36.0' but version of GLib is 2.30.2
4037	configure:12701: error: Package requirements (glib-2.0 >= 2.36.0) were not met:
4038
4039	Requested 'glib-2.0 >= 2.36.0' but version of GLib is 2.30.2
4040
4041	Consider adjusting the PKG_CONFIG_PATH environment variable if you
4042	installed software in a non-standard prefix.
4043
4044	Alternatively, you may set the environment variables GLIB_CFLAGS
4045	and GLIB_LIBS to avoid the need to call pkg-config.
4046	See the pkg-config man page for more details.
4047
4048	## ---------------- ##
4049	## Cache variables. ##
4050	## ---------------- ##
4051
4052	ac_cv_build=x86_64-apple-darwin13.1.0
4053	ac_cv_c_compiler_gnu=yes
4054	ac_cv_env_CAIRO_CFLAGS_set=
4055	ac_cv_env_CAIRO_CFLAGS_value=
4056	ac_cv_env_CAIRO_LIBS_set=
4057	ac_cv_env_CAIRO_LIBS_value=
4058	ac_cv_env_CC_set=set
4059	ac_cv_env_CC_value=/usr/bin/clang
4060	ac_cv_env_CFLAGS_set=set
4061	ac_cv_env_CFLAGS_value='-pipe -Os -arch x86_64'
4062	ac_cv_env_CPPFLAGS_set=set
4063	ac_cv_env_CPPFLAGS_value=-I/opt/local/include
4064	ac_cv_env_CPP_set=
4065	ac_cv_env_CPP_value=
4066	ac_cv_env_FFI_CFLAGS_set=
4067	ac_cv_env_FFI_CFLAGS_value=
4068	ac_cv_env_FFI_LIBS_set=
4069	ac_cv_env_FFI_LIBS_value=
4070	ac_cv_env_GIO_CFLAGS_set=
4071	ac_cv_env_GIO_CFLAGS_value=
4072	ac_cv_env_GIO_LIBS_set=
4073	ac_cv_env_GIO_LIBS_value=
4074	ac_cv_env_GIO_UNIX_CFLAGS_set=
4075	ac_cv_env_GIO_UNIX_CFLAGS_value=
4076	ac_cv_env_GIO_UNIX_LIBS_set=
4077	ac_cv_env_GIO_UNIX_LIBS_value=
4078	ac_cv_env_GIREPO_CFLAGS_set=
4079	ac_cv_env_GIREPO_CFLAGS_value=
4080	ac_cv_env_GIREPO_LIBS_set=
4081	ac_cv_env_GIREPO_LIBS_value=
4082	ac_cv_env_GLIB_CFLAGS_set=
4083	ac_cv_env_GLIB_CFLAGS_value=
4084	ac_cv_env_GLIB_LIBS_set=
4085	ac_cv_env_GLIB_LIBS_value=
4086	ac_cv_env_GMODULE_CFLAGS_set=
4087	ac_cv_env_GMODULE_CFLAGS_value=
4088	ac_cv_env_GMODULE_LIBS_set=
4089	ac_cv_env_GMODULE_LIBS_value=
4090	ac_cv_env_GOBJECT_CFLAGS_set=
4091	ac_cv_env_GOBJECT_CFLAGS_value=
4092	ac_cv_env_GOBJECT_LIBS_set=
4093	ac_cv_env_GOBJECT_LIBS_value=
4094	ac_cv_env_GTKDOC_DEPS_CFLAGS_set=
4095	ac_cv_env_GTKDOC_DEPS_CFLAGS_value=
4096	ac_cv_env_GTKDOC_DEPS_LIBS_set=
4097	ac_cv_env_GTKDOC_DEPS_LIBS_value=
4098	ac_cv_env_LDFLAGS_set=set
4099	ac_cv_env_LDFLAGS_value='-L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64'
4100	ac_cv_env_LIBS_set=
4101	ac_cv_env_LIBS_value=
4102	ac_cv_env_PKG_CONFIG_LIBDIR_set=
4103	ac_cv_env_PKG_CONFIG_LIBDIR_value=
4104	ac_cv_env_PKG_CONFIG_PATH_set=
4105	ac_cv_env_PKG_CONFIG_PATH_value=
4106	ac_cv_env_PKG_CONFIG_set=
4107	ac_cv_env_PKG_CONFIG_value=
4108	ac_cv_env_PYTHON_set=set
4109	ac_cv_env_PYTHON_value=/opt/local/bin/python2.7
4110	ac_cv_env_SCANNER_CFLAGS_set=
4111	ac_cv_env_SCANNER_CFLAGS_value=
4112	ac_cv_env_SCANNER_LIBS_set=
4113	ac_cv_env_SCANNER_LIBS_value=
4114	ac_cv_env_build_alias_set=
4115	ac_cv_env_build_alias_value=
4116	ac_cv_env_host_alias_set=
4117	ac_cv_env_host_alias_value=
4118	ac_cv_env_target_alias_set=
4119	ac_cv_env_target_alias_value=
4120	ac_cv_header_dlfcn_h=yes
4121	ac_cv_header_inttypes_h=yes
4122	ac_cv_header_memory_h=yes
4123	ac_cv_header_stdc=yes
4124	ac_cv_header_stdint_h=yes
4125	ac_cv_header_stdlib_h=yes
4126	ac_cv_header_string_h=yes
4127	ac_cv_header_strings_h=yes
4128	ac_cv_header_sys_stat_h=yes
4129	ac_cv_header_sys_types_h=yes
4130	ac_cv_header_unistd_h=yes
4131	ac_cv_host=x86_64-apple-darwin13.1.0
4132	ac_cv_lib_dl_dlopen=yes
4133	ac_cv_lib_lex=-ll
4134	ac_cv_objext=o
4135	ac_cv_path_EGREP='/usr/bin/grep -E'
4136	ac_cv_path_FGREP='/usr/bin/grep -F'
4137	ac_cv_path_GREP=/usr/bin/grep
4138	ac_cv_path_SED=/usr/bin/sed
4139	ac_cv_path_ac_pt_PKG_CONFIG=/opt/local/bin/pkg-config
4140	ac_cv_prog_AWK=awk
4141	ac_cv_prog_CPP='/usr/bin/clang -E'
4142	ac_cv_prog_LEX=flex
4143	ac_cv_prog_YACC='bison -y'
4144	ac_cv_prog_ac_ct_AR=ar
4145	ac_cv_prog_ac_ct_CC=/usr/bin/clang
4146	ac_cv_prog_ac_ct_DSYMUTIL=dsymutil
4147	ac_cv_prog_ac_ct_LIPO=lipo
4148	ac_cv_prog_ac_ct_NMEDIT=nmedit
4149	ac_cv_prog_ac_ct_OTOOL=otool
4150	ac_cv_prog_ac_ct_RANLIB=ranlib
4151	ac_cv_prog_ac_ct_STRIP=strip
4152	ac_cv_prog_cc__usr_bin_clang_c_o=yes
4153	ac_cv_prog_cc_c89=
4154	ac_cv_prog_cc_g=yes
4155	ac_cv_prog_lex_root=lex.yy
4156	ac_cv_prog_lex_yytext_pointer=yes
4157	ac_cv_prog_make_make_set=yes
4158	am_cv_CC_dependencies_compiler_type=gcc3
4159	am_cv_make_support_nested_variables=yes
4160	am_cv_prog_tar_ustar=gnutar
4161	lt_cv_apple_cc_single_mod=yes
4162	lt_cv_ar_at_file=no
4163	lt_cv_deplibs_check_method=pass_all
4164	lt_cv_file_magic_cmd='$MAGIC_CMD'
4165	lt_cv_file_magic_test_file=
4166	lt_cv_ld_exported_symbols_list=yes
4167	lt_cv_ld_force_load=yes
4168	lt_cv_ld_reload_flag=-r
4169	lt_cv_nm_interface='BSD nm'
4170	lt_cv_objdir=.libs
4171	lt_cv_path_LD=/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld
4172	lt_cv_path_NM=/usr/bin/nm
4173	lt_cv_path_mainfest_tool=no
4174	lt_cv_prog_compiler_c_o=yes
4175	lt_cv_prog_compiler_pic='-fno-common -DPIC'
4176	lt_cv_prog_compiler_pic_works=yes
4177	lt_cv_prog_compiler_rtti_exceptions=yes
4178	lt_cv_prog_compiler_static_works=no
4179	lt_cv_prog_gnu_ld=no
4180	lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
4181	lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.[ ]$[BCDEGRST][BCDEGRST]$[ ][ ]_$[_A-Za-z][_A-Za-z0-9]$$/\1 _\2 \2/p'\'' \| sed '\''/ __gnu_lto/d'\'''
4182	lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: $[^ ]$[ ]$/ {\"\1\", (void ) 0},/p'\'' -e '\''s/^[BCDEGRST] $[^ ]$ $[^ ]$$/ {"\2", (void *) \&\2},/p'\'''
4183	lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: $[^ ]$[ ]$/ {\"\1\", (void ) 0},/p'\'' -e '\''s/^[BCDEGRST] $[^ ]$ $lib[^ ]$$/ {"\2", (void ) \&\2},/p'\'' -e '\''s/^[BCDEGRST] $[^ ]$ $[^ ]$$/ {"lib\2", (void *) \&\2},/p'\'''
4184	lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* $.$$/extern int \1();/p'\'' -e '\''s/^[BCDEGRST] .* $.*$$/extern char \1;/p'\'''
4185	lt_cv_sys_max_cmd_len=196608
4186	lt_cv_to_host_file_cmd=func_convert_file_noop
4187	lt_cv_to_tool_file_cmd=func_convert_file_noop
4188
4189	## ----------------- ##
4190	## Output variables. ##
4191	## ----------------- ##
4192
4193	ACLOCAL='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-1.38.0/build-aux/missing aclocal-1.13'
4194	AMDEPBACKSLASH='\'
4195	AMDEP_FALSE='#'
4196	AMDEP_TRUE=''
4197	AMTAR='$${TAR-tar}'
4198	AM_BACKSLASH='\'
4199	AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
4200	AM_DEFAULT_VERBOSITY='0'
4201	AM_V='$(V)'
4202	AR='ar'
4203	AUTOCONF='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-1.38.0/build-aux/missing autoconf'
4204	AUTOHEADER='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-1.38.0/build-aux/missing autoheader'
4205	AUTOMAKE='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-1.38.0/build-aux/missing automake-1.13'
4206	AWK='awk'
4207	BUILD_DOCTOOL_FALSE=''
4208	BUILD_DOCTOOL_TRUE=''
4209	CAIRO_CFLAGS=''
4210	CAIRO_GIR_PACKAGE=''
4211	CAIRO_LIBS=''
4212	CAIRO_SHARED_LIBRARY=''
4213	CC='/usr/bin/clang'
4214	CCDEPMODE='depmode=gcc3'
4215	CFLAGS='-fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -pipe -Os -arch x86_64'
4216	CPP='/usr/bin/clang -E'
4217	CPPFLAGS='-I/opt/local/include'
4218	CYGPATH_W='echo'
4219	DEFS=''
4220	DEPDIR='.deps'
4221	DLLTOOL='false'
4222	DSYMUTIL='dsymutil'
4223	DUMPBIN=''
4224	ECHO_C='\c'
4225	ECHO_N=''
4226	ECHO_T=''
4227	EGREP='/usr/bin/grep -E'
4228	ENABLE_GTK_DOC_FALSE=''
4229	ENABLE_GTK_DOC_TRUE=''
4230	EXEEXT=''
4231	EXPANDED_BINDIR='/opt/local/bin'
4232	EXPANDED_DATADIR='/opt/local/share'
4233	EXPANDED_LIBDIR='/opt/local/lib'
4234	EXPANDED_LIBEXECDIR='/opt/local/libexec'
4235	EXPANDED_LOCALSTATEDIR='/opt/local/var'
4236	EXPANDED_SYSCONFDIR='/opt/local/etc'
4237	EXTRA_LINK_FLAGS=''
4238	FFI_CFLAGS=''
4239	FFI_LIBS=''
4240	FFI_PC_CFLAGS=''
4241	FFI_PC_LIBS=''
4242	FFI_PC_PACKAGES=''
4243	FGREP='/usr/bin/grep -F'
4244	GIO_CFLAGS=''
4245	GIO_LIBS=''
4246	GIO_UNIX_CFLAGS=''
4247	GIO_UNIX_LIBS=''
4248	GIREPO_CFLAGS=''
4249	GIREPO_LIBS=''
4250	GIR_DIR='/opt/local/share/gir-1.0'
4251	GIR_SUFFIX='gir-1.0'
4252	GLIBSRC=''
4253	GLIB_CFLAGS=''
4254	GLIB_LIBS=''
4255	GMODULE_CFLAGS=''
4256	GMODULE_LIBS=''
4257	GOBJECT_CFLAGS=''
4258	GOBJECT_INTROSPECTION_LIBDIR='/opt/local/lib'
4259	GOBJECT_LIBS=''
4260	GREP='/usr/bin/grep'
4261	GTKDOC_CHECK=''
4262	GTKDOC_DEPS_CFLAGS=''
4263	GTKDOC_DEPS_LIBS=''
4264	GTKDOC_MKPDF=''
4265	GTKDOC_REBASE=''
4266	GTK_DOC_BUILD_HTML_FALSE=''
4267	GTK_DOC_BUILD_HTML_TRUE=''
4268	GTK_DOC_BUILD_PDF_FALSE=''
4269	GTK_DOC_BUILD_PDF_TRUE=''
4270	GTK_DOC_USE_LIBTOOL_FALSE=''
4271	GTK_DOC_USE_LIBTOOL_TRUE=''
4272	GTK_DOC_USE_REBASE_FALSE=''
4273	GTK_DOC_USE_REBASE_TRUE=''
4274	HAVE_CAIRO_FALSE=''
4275	HAVE_CAIRO_TRUE=''
4276	HAVE_GIO_UNIX_FALSE=''
4277	HAVE_GIO_UNIX_TRUE=''
4278	HTML_DIR=''
4279	INSTALL_DATA='${INSTALL} -m 644'
4280	INSTALL_PROGRAM='${INSTALL}'
4281	INSTALL_SCRIPT='${INSTALL}'
4282	INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
4283	LD='/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ld'
4284	LDFLAGS='-L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64'
4285	LEX='flex'
4286	LEXLIB='-ll'
4287	LEX_OUTPUT_ROOT='lex.yy'
4288	LIBOBJS=''
4289	LIBS='-ldl '
4290	LIBTOOL='$(SHELL) $(top_builddir)/libtool'
4291	LIPO='lipo'
4292	LN_S='ln -s'
4293	LTLIBOBJS=''
4294	MAINT=''
4295	MAINTAINER_MODE_FALSE='#'
4296	MAINTAINER_MODE_TRUE=''
4297	MAKEINFO='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-1.38.0/build-aux/missing makeinfo'
4298	MANIFEST_TOOL=':'
4299	MKDIR_P='build-aux/install-sh -c -d'
4300	NM='/usr/bin/nm'
4301	NMEDIT='nmedit'
4302	OBJDUMP='false'
4303	OBJEXT='o'
4304	OS_WIN32_FALSE=''
4305	OS_WIN32_TRUE='#'
4306	OTOOL64=':'
4307	OTOOL='otool'
4308	PACKAGE='gobject-introspection'
4309	PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection'
4310	PACKAGE_NAME='gobject-introspection'
4311	PACKAGE_STRING='gobject-introspection 1.38.0'
4312	PACKAGE_TARNAME='gobject-introspection'
4313	PACKAGE_URL=''
4314	PACKAGE_VERSION='1.38.0'
4315	PATH_SEPARATOR=':'
4316	PKG_CONFIG='/opt/local/bin/pkg-config'
4317	PKG_CONFIG_LIBDIR=''
4318	PKG_CONFIG_PATH=''
4319	POW_LIB=''
4320	PYTHON='/opt/local/bin/python2.7'
4321	PYTHON_EXEC_PREFIX=''
4322	PYTHON_INCLUDES=''
4323	PYTHON_LIBS=''
4324	PYTHON_PLATFORM=''
4325	PYTHON_PREFIX=''
4326	PYTHON_VERSION=''
4327	RANLIB='ranlib'
4328	SCANNER_CFLAGS=''
4329	SCANNER_LIBS=''
4330	SED='/usr/bin/sed'
4331	SET_MAKE=''
4332	SHELL='/bin/sh'
4333	STRIP='strip'
4334	VERSION='1.38.0'
4335	WITH_GLIBSRC_FALSE=''
4336	WITH_GLIBSRC_TRUE=''
4337	YACC='bison -y'
4338	ac_ct_AR='ar'
4339	ac_ct_CC='/usr/bin/clang'
4340	ac_ct_DUMPBIN=''
4341	am__EXEEXT_FALSE=''
4342	am__EXEEXT_TRUE=''
4343	am__fastdepCC_FALSE='#'
4344	am__fastdepCC_TRUE=''
4345	am__include='include'
4346	am__isrc=''
4347	am__leading_dot='.'
4348	am__nodep='_no'
4349	am__quote=''
4350	am__tar='tar --format=ustar -chf - "$$tardir"'
4351	am__untar='tar -xf -'
4352	bindir='${exec_prefix}/bin'
4353	build='x86_64-apple-darwin13.1.0'
4354	build_alias=''
4355	build_cpu='x86_64'
4356	build_os='darwin13.1.0'
4357	build_vendor='apple'
4358	datadir='${datarootdir}'
4359	datarootdir='${prefix}/share'
4360	docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
4361	dvidir='${docdir}'
4362	exec_prefix='NONE'
4363	host='x86_64-apple-darwin13.1.0'
4364	host_alias=''
4365	host_cpu='x86_64'
4366	host_os='darwin13.1.0'
4367	host_vendor='apple'
4368	htmldir='${docdir}'
4369	includedir='${prefix}/include'
4370	infodir='${datarootdir}/info'
4371	install_sh='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-1.38.0/build-aux/install-sh'
4372	libdir='${exec_prefix}/lib'
4373	libexecdir='${exec_prefix}/libexec'
4374	localedir='${datarootdir}/locale'
4375	localstatedir='${prefix}/var'
4376	mandir='${datarootdir}/man'
4377	mkdir_p='$(MKDIR_P)'
4378	oldincludedir='/usr/include'
4379	pdfdir='${docdir}'
4380	pkgpyexecdir=''
4381	pkgpythondir=''
4382	prefix='/opt/local'
4383	program_transform_name='s,x,x,'
4384	psdir='${docdir}'
4385	pyexecdir=''
4386	pythondir=''
4387	sbindir='${exec_prefix}/sbin'
4388	sharedstatedir='${prefix}/com'
4389	sysconfdir='${prefix}/etc'
4390	target_alias=''
4391
4392	## ----------- ##
4393	## confdefs.h. ##
4394	## ----------- ##
4395
4396	/* confdefs.h */
4397	#define PACKAGE_NAME "gobject-introspection"
4398	#define PACKAGE_TARNAME "gobject-introspection"
4399	#define PACKAGE_VERSION "1.38.0"
4400	#define PACKAGE_STRING "gobject-introspection 1.38.0"
4401	#define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection"
4402	#define PACKAGE_URL ""
4403	#define PACKAGE "gobject-introspection"
4404	#define VERSION "1.38.0"
4405	#define STDC_HEADERS 1
4406	#define HAVE_SYS_TYPES_H 1
4407	#define HAVE_SYS_STAT_H 1
4408	#define HAVE_STDLIB_H 1
4409	#define HAVE_STRING_H 1
4410	#define HAVE_MEMORY_H 1
4411	#define HAVE_STRINGS_H 1
4412	#define HAVE_INTTYPES_H 1
4413	#define HAVE_STDINT_H 1
4414	#define HAVE_UNISTD_H 1
4415	#define HAVE_DLFCN_H 1
4416	#define LT_OBJDIR ".libs/"
4417	#define YYTEXT_POINTER 1
4418	#define HAVE_LIBDL 1
4419	#define SHLIB_SUFFIX "dylib"
4420	#define GOBJECT_INTROSPECTION_LIBDIR "/opt/local/lib"
4421	#define GIR_SUFFIX "gir-1.0"
4422	#define GIR_DIR "/opt/local/share/gir-1.0"
4423
4424	configure: exit 1

Download in other formats:

Original Format