Context Navigation

Back to Ticket #45509

Ticket #45509: glibtoolize-snc

File glibtoolize-snc, 76.8 KB (added by nerdling (Jeremy Lavergne), 10 years ago)

Line
1	#! /bin/sh
2	# Generated from libtoolize.m4sh by GNU Autoconf 2.68.
3
4	# libtoolize (GNU libtool) 2.4.2
5	# Written by Gary V. Vaughan <gary@gnu.org>, 2003
6
7	# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
8	# Free Software Foundation, Inc.
9	# This is free software; see the source for copying conditions. There is NO
10	# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
11
12	# Libtoolize is free software; you can redistribute it and/or modify
13	# it under the terms of the GNU General Public License as published by
14	# the Free Software Foundation; either version 2 of the License, or
15	# (at your option) any later version.
16	#
17	# Libtoolize is distributed in the hope that it will be useful, but
18	# WITHOUT ANY WARRANTY; without even the implied warranty of
19	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20	# GNU General Public License for more details.
21	#
22	# You should have received a copy of the GNU General Public License
23	# along with libtoolize; see the file COPYING. If not, a copy
24	# can be downloaded from http://www.gnu.org/licenses/gpl.html,
25	# or obtained by writing to the Free Software Foundation, Inc.,
26	# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
27
28	# Usage: $progname [OPTION]...
29	#
30	# Prepare a package to use libtool.
31	#
32	# -c, --copy copy files rather than symlinking them
33	# --debug enable verbose shell tracing
34	# -n, --dry-run print commands rather than running them
35	# -f, --force replace existing files
36	# -i, --install copy missing auxiliary files
37	# --ltdl[=DIR] install libltdl sources [default: libltdl]
38	# --no-warn don't display warning messages
39	# --nonrecursive prepare ltdl for non-recursive make
40	# -q, --quiet work silently
41	# --recursive prepare ltdl for recursive make
42	# --subproject prepare ltdl to configure and build independently
43	# -v, --verbose verbosely report processing
44	# --version print version information and exit
45	# -h, --help print short or long help message
46	#
47	# The following space or comma delimited options can be passed to $progname
48	# via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
49	# options are ignored:
50	#
51	# --debug enable verbose shell tracing
52	# --no-warn don't display warning messages
53	# --quiet work silently
54	# --verbose verbosely report processing
55	#
56	# You must `cd' to the top directory of your package before you run
57	# `$progname'.
58	#
59	# When reporting a bug, please describe a test case to reproduce it and
60	# include the following information:
61	#
62	# host-triplet: x86_64-apple-darwin13.3.0
63	# $progname: (GNU libtool) 2.4.2
64	# automake: $automake_version
65	# autoconf: $autoconf_version
66	#
67	# Report bugs to <bug-libtool@gnu.org>.
68	# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
69	# General help using GNU software: <http://www.gnu.org/gethelp/>.
70
71	: ${TAR=tar}
72
73	PROGRAM=libtoolize
74
75	# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
76	# is ksh but when the shell is invoked as "sh" and the current value of
77	# the _XPG environment variable is not equal to 1 (one), the special
78	# positional parameter $0, within a function call, is the name of the
79	# function.
80	progpath="$0"
81
82	## -------------------- ##
83	## M4sh Initialization. ##
84	## -------------------- ##
85
86	# Be more Bourne compatible
87	DUALCASE=1; export DUALCASE # for MKS sh
88	if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
89	emulate sh
90	NULLCMD=:
91	# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
92	# is contrary to our usage. Disable this feature.
93	alias -g '${1+"$@"}'='"$@"'
94	setopt NO_GLOB_SUBST
95	else
96	case `(set -o) 2>/dev/null` in #(
97	posix) :
98	set -o posix ;; #(
99	*) :
100	;;
101	esac
102	fi
103
104
105	as_nl='
106	'
107	export as_nl
108	# Printing a long string crashes Solaris 7 /usr/bin/printf.
109	as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
110	as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
111	as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
112	# Prefer a ksh shell builtin over an external printf program on Solaris,
113	# but without wasting forks for bash or zsh.
114	if test -z "$BASH_VERSION$ZSH_VERSION" \
115	&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
116	as_echo='print -r --'
117	as_echo_n='print -rn --'
118	elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
119	as_echo='printf %s\n'
120	as_echo_n='printf %s'
121	else
122	if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
123	as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
124	as_echo_n='/usr/ucb/echo -n'
125	else
126	as_echo_body='eval expr "X$1" : "X\$.*\$"'
127	as_echo_n_body='eval
128	arg=$1;
129	case $arg in #(
130	"$as_nl")
131	expr "X$arg" : "X\$.*\$$as_nl";
132	arg=`expr "X$arg" : ".$as_nl\$.\$"`;;
133	esac;
134	expr "X$arg" : "X\$.*\$" \| tr -d "$as_nl"
135	'
136	export as_echo_n_body
137	as_echo_n='sh -c $as_echo_n_body as_echo'
138	fi
139	export as_echo_body
140	as_echo='sh -c $as_echo_body as_echo'
141	fi
142
143	# The user is always right.
144	if test "${PATH_SEPARATOR+set}" != set; then
145	PATH_SEPARATOR=:
146	(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
147	(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \|\|
148	PATH_SEPARATOR=';'
149	}
150	fi
151
152
153	# IFS
154	# We need space, tab and new line, in precisely that order. Quoting is
155	# there to prevent editors from complaining about space-tab.
156	# (If _AS_PATH_WALK were called with IFS unset, it would disable word
157	# splitting by setting IFS to empty value.)
158	IFS=" "" $as_nl"
159
160	# Find who we are. Look in the path if we contain no directory separator.
161	as_myself=
162	case $0 in #((
163	[\\/] ) as_myself=$0 ;;
164	*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
165	for as_dir in $PATH
166	do
167	IFS=$as_save_IFS
168	test -z "$as_dir" && as_dir=.
169	test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
170	done
171	IFS=$as_save_IFS
172
173	;;
174	esac
175	# We did not find ourselves, most probably we were run as `sh COMMAND'
176	# in which case we are not to be found in the path.
177	if test "x$as_myself" = x; then
178	as_myself=$0
179	fi
180	if test ! -f "$as_myself"; then
181	$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
182	exit 1
183	fi
184
185	# Unset variables that we do not need and which cause bugs (e.g. in
186	# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "\|\| exit 1"
187	# suppresses any "Segmentation fault" message there. '((' could
188	# trigger a bug in pdksh 5.2.14.
189	for as_var in BASH_ENV ENV MAIL MAILPATH
190	do eval test x\${$as_var+set} = xset \
191	&& ( (unset $as_var) \|\| exit 1) >/dev/null 2>&1 && unset $as_var \|\| :
192	done
193	PS1='$ '
194	PS2='> '
195	PS4='+ '
196
197	# NLS nuisances.
198	LC_ALL=C
199	export LC_ALL
200	LANGUAGE=C
201	export LANGUAGE
202
203	# CDPATH.
204	(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
205
206	if test "x$CONFIG_SHELL" = x; then
207	as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
208	emulate sh
209	NULLCMD=:
210	# Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
211	# is contrary to our usage. Disable this feature.
212	alias -g '\${1+\"\$@\"}'='\"\$@\"'
213	setopt NO_GLOB_SUBST
214	else
215	case \`(set -o) 2>/dev/null\` in #(
216	posix) :
217	set -o posix ;; #(
218	*) :
219	;;
220	esac
221	fi
222	"
223	as_required="as_fn_return () { (exit \$1); }
224	as_fn_success () { as_fn_return 0; }
225	as_fn_failure () { as_fn_return 1; }
226	as_fn_ret_success () { return 0; }
227	as_fn_ret_failure () { return 1; }
228
229	exitcode=0
230	as_fn_success \|\| { exitcode=1; echo as_fn_success failed.; }
231	as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
232	as_fn_ret_success \|\| { exitcode=1; echo as_fn_ret_success failed.; }
233	as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
234	if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
235
236	else
237	exitcode=1; echo positional parameters were not saved.
238	fi
239	test x\$exitcode = x0 \|\| exit 1"
240	as_suggested=""
241	if (eval "$as_required") 2>/dev/null; then :
242	as_have_required=yes
243	else
244	as_have_required=no
245	fi
246	if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
247
248	else
249	as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
250	as_found=false
251	for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
252	do
253	IFS=$as_save_IFS
254	test -z "$as_dir" && as_dir=.
255	as_found=:
256	case $as_dir in #(
257	/*)
258	for as_base in sh bash ksh sh5; do
259	# Try only shells that exist, to save several forks.
260	as_shell=$as_dir/$as_base
261	if { test -f "$as_shell" \|\| test -f "$as_shell.exe"; } &&
262	{ $as_echo "$as_bourne_compatible""$as_required" \| as_run=a "$as_shell"; } 2>/dev/null; then :
263	CONFIG_SHELL=$as_shell as_have_required=yes
264	break 2
265	fi
266	done;;
267	esac
268	as_found=false
269	done
270	$as_found \|\| { if { test -f "$SHELL" \|\| test -f "$SHELL.exe"; } &&
271	{ $as_echo "$as_bourne_compatible""$as_required" \| as_run=a "$SHELL"; } 2>/dev/null; then :
272	CONFIG_SHELL=$SHELL as_have_required=yes
273	fi; }
274	IFS=$as_save_IFS
275
276
277	if test "x$CONFIG_SHELL" != x; then :
278	# We cannot yet assume a decent shell, so we have to provide a
279	# neutralization value for shells without unset; and this also
280	# works around shells that cannot unset nonexistent variables.
281	# Preserve -v and -x to the replacement shell.
282	BASH_ENV=/dev/null
283	ENV=/dev/null
284	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
285	export CONFIG_SHELL
286	case $- in # ((((
287	vx* \| xv* ) as_opts=-vx ;;
288	v ) as_opts=-v ;;
289	x ) as_opts=-x ;;
290	* ) as_opts= ;;
291	esac
292	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
293	fi
294
295	if test x$as_have_required = xno; then :
296	$as_echo "$0: This script requires a shell more modern than all"
297	$as_echo "$0: the shells that I found on your system."
298	if test x${ZSH_VERSION+set} = xset ; then
299	$as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
300	$as_echo "$0: be upgraded to zsh 4.3.4 or later."
301	else
302	$as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
303	$0: including any error possibly output before this
304	$0: message. Then install a modern shell, or manually run
305	$0: the script under such a shell if you do have one."
306	fi
307	exit 1
308	fi
309	fi
310	fi
311	SHELL=${CONFIG_SHELL-/bin/sh}
312	export SHELL
313	# Unset more variables known to interfere with behavior of common tools.
314	CLICOLOR_FORCE= GREP_OPTIONS=
315	unset CLICOLOR_FORCE GREP_OPTIONS
316
317	## --------------------- ##
318	## M4sh Shell Functions. ##
319	## --------------------- ##
320	# as_fn_unset VAR
321	# ---------------
322	# Portably unset VAR.
323	as_fn_unset ()
324	{
325	{ eval $1=; unset $1;}
326	}
327	as_unset=as_fn_unset
328	## -------------------- ##
329	## Main body of script. ##
330	## -------------------- ##
331
332
333
334
335	: ${CP="cp -f"}
336	test "${ECHO+set}" = set \|\| ECHO=${as_echo-'printf %s\n'}
337	: ${EGREP="/usr/bin/grep -E"}
338	: ${FGREP="/usr/bin/grep -F"}
339	: ${GREP="/usr/bin/grep"}
340	: ${LN_S="ln -s"}
341	: ${MAKE="make"}
342	: ${MKDIR="mkdir"}
343	: ${MV="mv -f"}
344	: ${RM="rm -f"}
345	: ${SED="/opt/pspp/bin/gsed"}
346	: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
347	: ${Xsed="$SED -e 1s/^X//"}
348
349	# Global variables:
350	EXIT_SUCCESS=0
351	EXIT_FAILURE=1
352	EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
353	EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
354
355	exit_status=$EXIT_SUCCESS
356
357	# Make sure IFS has a sensible default
358	lt_nl='
359	'
360	IFS=" $lt_nl"
361
362	dirname="s,/[^/]*$,,"
363	basename="s,^.*/,,"
364
365	# func_dirname file append nondir_replacement
366	# Compute the dirname of FILE. If nonempty, add APPEND to the result,
367	# otherwise set result to NONDIR_REPLACEMENT.
368	func_dirname ()
369	{
370	func_dirname_result=`$ECHO "${1}" \| $SED "$dirname"`
371	if test "X$func_dirname_result" = "X${1}"; then
372	func_dirname_result="${3}"
373	else
374	func_dirname_result="$func_dirname_result${2}"
375	fi
376	} # func_dirname may be replaced by extended shell implementation
377
378
379	# func_basename file
380	func_basename ()
381	{
382	func_basename_result=`$ECHO "${1}" \| $SED "$basename"`
383	} # func_basename may be replaced by extended shell implementation
384
385
386	# func_dirname_and_basename file append nondir_replacement
387	# perform func_basename and func_dirname in a single function
388	# call:
389	# dirname: Compute the dirname of FILE. If nonempty,
390	# add APPEND to the result, otherwise set result
391	# to NONDIR_REPLACEMENT.
392	# value returned in "$func_dirname_result"
393	# basename: Compute filename of FILE.
394	# value retuned in "$func_basename_result"
395	# Implementation must be kept synchronized with func_dirname
396	# and func_basename. For efficiency, we do not delegate to
397	# those functions but instead duplicate the functionality here.
398	func_dirname_and_basename ()
399	{
400	# Extract subdirectory from the argument.
401	func_dirname_result=`$ECHO "${1}" \| $SED -e "$dirname"`
402	if test "X$func_dirname_result" = "X${1}"; then
403	func_dirname_result="${3}"
404	else
405	func_dirname_result="$func_dirname_result${2}"
406	fi
407	func_basename_result=`$ECHO "${1}" \| $SED -e "$basename"`
408	} # func_dirname_and_basename may be replaced by extended shell implementation
409
410
411	# func_stripname prefix suffix name
412	# strip PREFIX and SUFFIX off of NAME.
413	# PREFIX and SUFFIX must not contain globbing or regex special
414	# characters, hashes, percent signs, but SUFFIX may contain a leading
415	# dot (in which case that matches only a dot).
416	# func_strip_suffix prefix name
417	func_stripname ()
418	{
419	case ${2} in
420	.*) func_stripname_result=`$ECHO "${3}" \| $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
421	*) func_stripname_result=`$ECHO "${3}" \| $SED "s%^${1}%%; s%${2}\$%%"`;;
422	esac
423	} # func_stripname may be replaced by extended shell implementation
424
425
426	# These SED scripts presuppose an absolute path with a trailing slash.
427	pathcar='s,^/$[^/]$.$,\1,'
428	pathcdr='s,^/[^/]*,,'
429	removedotparts=':dotsl
430	s@/\./@/@g
431	t dotsl
432	s,/\.$,/,'
433	collapseslashes='s@/\{1,\}@/@g'
434	finalslash='s,/*$,/,'
435
436	# func_normal_abspath PATH
437	# Remove doubled-up and trailing slashes, "." path components,
438	# and cancel out any ".." path components in PATH after making
439	# it an absolute path.
440	# value returned in "$func_normal_abspath_result"
441	func_normal_abspath ()
442	{
443	# Start from root dir and reassemble the path.
444	func_normal_abspath_result=
445	func_normal_abspath_tpath=$1
446	func_normal_abspath_altnamespace=
447	case $func_normal_abspath_tpath in
448	"")
449	# Empty path, that just means $cwd.
450	func_stripname '' '/' "`pwd`"
451	func_normal_abspath_result=$func_stripname_result
452	return
453	;;
454	# The next three entries are used to spot a run of precisely
455	# two leading slashes without using negated character classes;
456	# we take advantage of case's first-match behaviour.
457	///*)
458	# Unusual form of absolute path, do nothing.
459	;;
460	//*)
461	# Not necessarily an ordinary path; POSIX reserves leading '//'
462	# and for example Cygwin uses it to access remote file shares
463	# over CIFS/SMB, so we conserve a leading double slash if found.
464	func_normal_abspath_altnamespace=/
465	;;
466	/*)
467	# Absolute path, do nothing.
468	;;
469	*)
470	# Relative path, prepend $cwd.
471	func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
472	;;
473	esac
474	# Cancel out all the simple stuff to save iterations. We also want
475	# the path to end with a slash for ease of parsing, so make sure
476	# there is one (and only one) here.
477	func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" \| $SED \
478	-e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
479	while :; do
480	# Processed it all yet?
481	if test "$func_normal_abspath_tpath" = / ; then
482	# If we ascended to the root using ".." the result may be empty now.
483	if test -z "$func_normal_abspath_result" ; then
484	func_normal_abspath_result=/
485	fi
486	break
487	fi
488	func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" \| $SED \
489	-e "$pathcar"`
490	func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" \| $SED \
491	-e "$pathcdr"`
492	# Figure out what to do with it
493	case $func_normal_abspath_tcomponent in
494	"")
495	# Trailing empty path component, ignore it.
496	;;
497	..)
498	# Parent dir; strip last assembled component from result.
499	func_dirname "$func_normal_abspath_result"
500	func_normal_abspath_result=$func_dirname_result
501	;;
502	*)
503	# Actual path component, append it.
504	func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
505	;;
506	esac
507	done
508	# Restore leading double-slash if one was found on entry.
509	func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
510	}
511
512	# func_relative_path SRCDIR DSTDIR
513	# generates a relative path from SRCDIR to DSTDIR, with a trailing
514	# slash if non-empty, suitable for immediately appending a filename
515	# without needing to append a separator.
516	# value returned in "$func_relative_path_result"
517	func_relative_path ()
518	{
519	func_relative_path_result=
520	func_normal_abspath "$1"
521	func_relative_path_tlibdir=$func_normal_abspath_result
522	func_normal_abspath "$2"
523	func_relative_path_tbindir=$func_normal_abspath_result
524
525	# Ascend the tree starting from libdir
526	while :; do
527	# check if we have found a prefix of bindir
528	case $func_relative_path_tbindir in
529	$func_relative_path_tlibdir)
530	# found an exact match
531	func_relative_path_tcancelled=
532	break
533	;;
534	$func_relative_path_tlibdir*)
535	# found a matching prefix
536	func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
537	func_relative_path_tcancelled=$func_stripname_result
538	if test -z "$func_relative_path_result"; then
539	func_relative_path_result=.
540	fi
541	break
542	;;
543	*)
544	func_dirname $func_relative_path_tlibdir
545	func_relative_path_tlibdir=${func_dirname_result}
546	if test "x$func_relative_path_tlibdir" = x ; then
547	# Have to descend all the way to the root!
548	func_relative_path_result=../$func_relative_path_result
549	func_relative_path_tcancelled=$func_relative_path_tbindir
550	break
551	fi
552	func_relative_path_result=../$func_relative_path_result
553	;;
554	esac
555	done
556
557	# Now calculate path; take care to avoid doubling-up slashes.
558	func_stripname '' '/' "$func_relative_path_result"
559	func_relative_path_result=$func_stripname_result
560	func_stripname '/' '/' "$func_relative_path_tcancelled"
561	if test "x$func_stripname_result" != x ; then
562	func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
563	fi
564
565	# Normalisation. If bindir is libdir, return empty string,
566	# else relative path ending with a slash; either way, target
567	# file name can be directly appended.
568	if test ! -z "$func_relative_path_result"; then
569	func_stripname './' '' "$func_relative_path_result/"
570	func_relative_path_result=$func_stripname_result
571	fi
572	}
573
574	# The name of this program:
575	func_dirname_and_basename "$progpath"
576	progname=$func_basename_result
577
578	# Make sure we have an absolute path for reexecution:
579	case $progpath in
580	[\\/]\|[A-Za-z]:\\) ;;
581	[\\/])
582	progdir=$func_dirname_result
583	progdir=`cd "$progdir" && pwd`
584	progpath="$progdir/$progname"
585	;;
586	*)
587	save_IFS="$IFS"
588	IFS=${PATH_SEPARATOR-:}
589	for progdir in $PATH; do
590	IFS="$save_IFS"
591	test -x "$progdir/$progname" && break
592	done
593	IFS="$save_IFS"
594	test -n "$progdir" \|\| progdir=`pwd`
595	progpath="$progdir/$progname"
596	;;
597	esac
598
599	# Sed substitution that helps us do robust quoting. It backslashifies
600	# metacharacters that are still active within double-quoted strings.
601	Xsed="${SED}"' -e 1s/^X//'
602	sed_quote_subst='s/$[`"$\\]$/\\\1/g'
603
604	# Same as above, but do not quote variable references.
605	double_quote_subst='s/$["`\\]$/\\\1/g'
606
607	# Sed substitution that turns a string into a regex matching for the
608	# string literally.
609	sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
610
611	# Sed substitution that converts a w32 file name or path
612	# which contains forward slashes, into one that contains
613	# (escaped) backslashes. A very naive implementation.
614	lt_sed_naive_backslashify='s\|\\\\*\|\\\|g;s\|/\|\\\|g;s\|\\\|\\\\\|g'
615
616	# Re-`\' parameter expansions in output of double_quote_subst that were
617	# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
618	# in input to double_quote_subst, that '$' was protected from expansion.
619	# Since each input `\' is now two `\'s, look for any number of runs of
620	# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
621	bs='\\'
622	bs2='\\\\'
623	bs4='\\\\\\\\'
624	dollar='\$'
625	sed_double_backslash="\
626	s/$bs4/&\\
627	/g
628	s/^$bs2$dollar/$bs&/
629	s/\$[^$bs]\$$bs2$dollar/\\1$bs2$bs$dollar/g
630	s/\n//g"
631
632	# Standard options:
633	opt_dry_run=false
634	opt_help=false
635	opt_quiet=false
636	opt_verbose=false
637	opt_warning=:
638
639	# func_echo arg...
640	# Echo program name prefixed message, along with the current mode
641	# name if it has been set yet.
642	func_echo ()
643	{
644	$ECHO "$progname: ${opt_mode+$opt_mode: }$*"
645	}
646
647	# func_verbose arg...
648	# Echo program name prefixed message in verbose mode only.
649	func_verbose ()
650	{
651	$opt_verbose && func_echo ${1+"$@"}
652
653	# A bug in bash halts the script if the last line of a function
654	# fails when set -e is in force, so we need another command to
655	# work around that:
656	:
657	}
658
659	# func_echo_all arg...
660	# Invoke $ECHO with all args, space-separated.
661	func_echo_all ()
662	{
663	$ECHO "$*"
664	}
665
666	# func_error arg...
667	# Echo program name prefixed message to standard error.
668	func_error ()
669	{
670	$ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
671	}
672
673	# func_warning arg...
674	# Echo program name prefixed warning message to standard error.
675	func_warning ()
676	{
677	$opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
678
679	# bash bug again:
680	:
681	}
682
683	# func_fatal_error arg...
684	# Echo program name prefixed message to standard error, and exit.
685	func_fatal_error ()
686	{
687	func_error ${1+"$@"}
688	exit $EXIT_FAILURE
689	}
690
691	# func_fatal_help arg...
692	# Echo program name prefixed message to standard error, followed by
693	# a help hint, and exit.
694	func_fatal_help ()
695	{
696	func_error ${1+"$@"}
697	func_fatal_error "$help"
698	}
699	help="Try \`$progname --help' for more information." ## default
700
701
702	# func_grep expression filename
703	# Check whether EXPRESSION matches any line of FILENAME, without output.
704	func_grep ()
705	{
706	$GREP "$1" "$2" >/dev/null 2>&1
707	}
708
709
710	# func_mkdir_p directory-path
711	# Make sure the entire path to DIRECTORY-PATH is available.
712	func_mkdir_p ()
713	{
714	my_directory_path="$1"
715	my_dir_list=
716
717	if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
718
719	# Protect directory names starting with `-'
720	case $my_directory_path in
721	-*) my_directory_path="./$my_directory_path" ;;
722	esac
723
724	# While some portion of DIR does not yet exist...
725	while test ! -d "$my_directory_path"; do
726	# ...make a list in topmost first order. Use a colon delimited
727	# list incase some portion of path contains whitespace.
728	my_dir_list="$my_directory_path:$my_dir_list"
729
730	# If the last portion added has no slash in it, the list is done
731	case $my_directory_path in /) ;; *) break ;; esac
732
733	# ...otherwise throw away the child directory and loop
734	my_directory_path=`$ECHO "$my_directory_path" \| $SED -e "$dirname"`
735	done
736	my_dir_list=`$ECHO "$my_dir_list" \| $SED 's,:*$,,'`
737
738	save_mkdir_p_IFS="$IFS"; IFS=':'
739	for my_dir in $my_dir_list; do
740	IFS="$save_mkdir_p_IFS"
741	# mkdir can fail with a `File exist' error if two processes
742	# try to create one of the directories concurrently. Don't
743	# stop in that case!
744	$MKDIR "$my_dir" 2>/dev/null \|\| :
745	done
746	IFS="$save_mkdir_p_IFS"
747
748	# Bail out if we (or some other process) failed to create a directory.
749	test -d "$my_directory_path" \|\| \
750	func_fatal_error "Failed to create \`$1'"
751	fi
752	}
753
754
755	# func_mktempdir [string]
756	# Make a temporary directory that won't clash with other running
757	# libtool processes, and avoids race conditions if possible. If
758	# given, STRING is the basename for that directory.
759	func_mktempdir ()
760	{
761	my_template="${TMPDIR-/tmp}/${1-$progname}"
762
763	if test "$opt_dry_run" = ":"; then
764	# Return a directory name, but don't create it in dry-run mode
765	my_tmpdir="${my_template}-$$"
766	else
767
768	# If mktemp works, use that first and foremost
769	my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
770
771	if test ! -d "$my_tmpdir"; then
772	# Failing that, at least try and use $RANDOM to avoid a race
773	my_tmpdir="${my_template}-${RANDOM-0}$$"
774
775	save_mktempdir_umask=`umask`
776	umask 0077
777	$MKDIR "$my_tmpdir"
778	umask $save_mktempdir_umask
779	fi
780
781	# If we're not in dry-run mode, bomb out on failure
782	test -d "$my_tmpdir" \|\| \
783	func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
784	fi
785
786	$ECHO "$my_tmpdir"
787	}
788
789
790	# func_quote_for_eval arg
791	# Aesthetically quote ARG to be evaled later.
792	# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
793	# is double-quoted, suitable for a subsequent eval, whereas
794	# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
795	# which are still active within double quotes backslashified.
796	func_quote_for_eval ()
797	{
798	case $1 in
799	[\\\`\"\$])
800	func_quote_for_eval_unquoted_result=`$ECHO "$1" \| $SED "$sed_quote_subst"` ;;
801	*)
802	func_quote_for_eval_unquoted_result="$1" ;;
803	esac
804
805	case $func_quote_for_eval_unquoted_result in
806	# Double-quote args containing shell metacharacters to delay
807	# word splitting, command substitution and and variable
808	# expansion for a subsequent eval.
809	# Many Bourne shells cannot handle close brackets correctly
810	# in scan sets, so we specify it separately.
811	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
812	func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
813	;;
814	*)
815	func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
816	esac
817	}
818
819
820	# func_quote_for_expand arg
821	# Aesthetically quote ARG to be evaled later; same as above,
822	# but do not quote variable references.
823	func_quote_for_expand ()
824	{
825	case $1 in
826	[\\\`\"])
827	my_arg=`$ECHO "$1" \| $SED \
828	-e "$double_quote_subst" -e "$sed_double_backslash"` ;;
829	*)
830	my_arg="$1" ;;
831	esac
832
833	case $my_arg in
834	# Double-quote args containing shell metacharacters to delay
835	# word splitting and command substitution for a subsequent eval.
836	# Many Bourne shells cannot handle close brackets correctly
837	# in scan sets, so we specify it separately.
838	[\[\~\#\^\&\\{\}\\|\;\<\>\?\'\ \ ]\|]*\|"")
839	my_arg="\"$my_arg\""
840	;;
841	esac
842
843	func_quote_for_expand_result="$my_arg"
844	}
845
846
847	# func_show_eval cmd [fail_exp]
848	# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
849	# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
850	# is given, then evaluate it.
851	func_show_eval ()
852	{
853	my_cmd="$1"
854	my_fail_exp="${2-:}"
855
856	${opt_silent-false} \|\| {
857	func_quote_for_expand "$my_cmd"
858	eval "func_echo $func_quote_for_expand_result"
859	}
860
861	if ${opt_dry_run-false}; then :; else
862	eval "$my_cmd"
863	my_status=$?
864	if test "$my_status" -eq 0; then :; else
865	eval "(exit $my_status); $my_fail_exp"
866	fi
867	fi
868	}
869
870
871	# func_show_eval_locale cmd [fail_exp]
872	# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
873	# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
874	# is given, then evaluate it. Use the saved locale for evaluation.
875	func_show_eval_locale ()
876	{
877	my_cmd="$1"
878	my_fail_exp="${2-:}"
879
880	${opt_silent-false} \|\| {
881	func_quote_for_expand "$my_cmd"
882	eval "func_echo $func_quote_for_expand_result"
883	}
884
885	if ${opt_dry_run-false}; then :; else
886	eval "$lt_user_locale
887	$my_cmd"
888	my_status=$?
889	eval "$lt_safe_locale"
890	if test "$my_status" -eq 0; then :; else
891	eval "(exit $my_status); $my_fail_exp"
892	fi
893	fi
894	}
895
896	# func_tr_sh
897	# Turn $1 into a string suitable for a shell variable name.
898	# Result is stored in $func_tr_sh_result. All characters
899	# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
900	# if $1 begins with a digit, a '_' is prepended as well.
901	func_tr_sh ()
902	{
903	case $1 in
904	[0-9]* \| [!a-zA-Z0-9_])
905	func_tr_sh_result=`$ECHO "$1" \| $SED 's/^$[0-9]$/_\1/; s/[^a-zA-Z0-9_]/_/g'`
906	;;
907	* )
908	func_tr_sh_result=$1
909	;;
910	esac
911	}
912
913
914	# func_version
915	# Echo version message to standard output and exit.
916	func_version ()
917	{
918	$opt_debug
919
920	$SED -n '/(C)/!b go
921	:more
922	/\./!{
923	N
924	s/\n# / /
925	b more
926	}
927	:go
928	/^# '$PROGRAM' (GNU /,/# warranty; / {
929	s/^# //
930	s/^# *$//
931	s/$(C)$[ 0-9,-]$ [1-9][0-9]$/\1\2/
932	p
933	}' < "$progpath"
934	exit $?
935	}
936
937	# func_usage
938	# Echo short help message to standard output and exit.
939	func_usage ()
940	{
941	$opt_debug
942
943	$SED -n '/^# Usage:/,/^# .--help/ {
944	s/^# //
945	s/^# *$//
946	s/\$progname/'$progname'/
947	p
948	}' < "$progpath"
949	echo
950	$ECHO "run \`$progname --help \| more' for full usage"
951	exit $?
952	}
953
954	# func_help [NOEXIT]
955	# Echo long help message to standard output and exit,
956	# unless 'noexit' is passed as argument.
957	func_help ()
958	{
959	$opt_debug
960
961	$SED -n '/^# Usage:/,/# Report bugs to/ {
962	:print
963	s/^# //
964	s/^# *$//
965	s\$progname'$progname'*
966	s\$host'"$host"'*
967	s\$SHELL'"$SHELL"'*
968	s\$LTCC'"$LTCC"'*
969	s\$LTCFLAGS'"$LTCFLAGS"'*
970	s\$LD'"$LD"'*
971	s/\$with_gnu_ld/'"$with_gnu_ld"'/
972	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null \|$SED 1q`"'/
973	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null \|$SED 1q`"'/
974	p
975	d
976	}
977	/^# .* home page:/b print
978	/^# General help using/b print
979	' < "$progpath"
980	ret=$?
981	if test -z "$1"; then
982	exit $ret
983	fi
984	}
985
986	# func_missing_arg argname
987	# Echo program name prefixed message to standard error and set global
988	# exit_cmd.
989	func_missing_arg ()
990	{
991	$opt_debug
992
993	func_error "missing argument for $1."
994	exit_cmd=exit
995	}
996
997
998	# func_split_short_opt shortopt
999	# Set func_split_short_opt_name and func_split_short_opt_arg shell
1000	# variables after splitting SHORTOPT after the 2nd character.
1001	func_split_short_opt ()
1002	{
1003	my_sed_short_opt='1s/^$..$.*$/\1/;q'
1004	my_sed_short_rest='1s/^..$.*$$/\1/;q'
1005
1006	func_split_short_opt_name=`$ECHO "$1" \| $SED "$my_sed_short_opt"`
1007	func_split_short_opt_arg=`$ECHO "$1" \| $SED "$my_sed_short_rest"`
1008	} # func_split_short_opt may be replaced by extended shell implementation
1009
1010
1011	# func_split_long_opt longopt
1012	# Set func_split_long_opt_name and func_split_long_opt_arg shell
1013	# variables after splitting LONGOPT at the `=' sign.
1014	func_split_long_opt ()
1015	{
1016	my_sed_long_opt='1s/^$--[^=]$=./\1/;q'
1017	my_sed_long_arg='1s/^--[^=]*=//'
1018
1019	func_split_long_opt_name=`$ECHO "$1" \| $SED "$my_sed_long_opt"`
1020	func_split_long_opt_arg=`$ECHO "$1" \| $SED "$my_sed_long_arg"`
1021	} # func_split_long_opt may be replaced by extended shell implementation
1022
1023	exit_cmd=:
1024
1025
1026
1027
1028
1029	# ltdl can be installed to be self-contained (subproject, the default);
1030	# or to be configured by a parent project, either with a recursive or
1031	# nonrecursive automake driven make:
1032	ltdl_mode=
1033
1034	# Locations for important files:
1035	ltdldir=
1036
1037	# Parse environment options
1038	{
1039	my_sed_env_opt='1s/^$[^,:; ]$.$/\1/;q'
1040	my_sed_env_rest='1s/^[^,:; ][,:; ]$.*$$/\1/;q'
1041
1042	while test -n "$LIBTOOLIZE_OPTIONS"; do
1043	opt=`echo "$LIBTOOLIZE_OPTIONS" \| sed "$my_sed_env_opt"`
1044	LIBTOOLIZE_OPTIONS=`echo "$LIBTOOLIZE_OPTIONS" \| sed "$my_sed_env_rest"`
1045
1046	case $opt in
1047	--debug\|--no-warn\|--quiet\|--verbose)
1048	envopts="${envopts+$envopts }$opt" ;;
1049	--*) env_warning="${env_warning+$env_warning
1050	}unrecognized environment option \`$opt'" ;;
1051	*) func_fatal_help "garbled LIBTOOLIZE_OPTIONS near \`$opt'" ;;
1052	esac
1053	done
1054
1055	test -n "$envopts" && {
1056	func_quote_for_eval "$envopts"
1057	eval set dummy "$func_quote_for_eval_result" ${1+"$@"}
1058	shift
1059	}
1060	}
1061
1062
1063
1064	# Option defaults:
1065	opt_debug=:
1066	opt_copy=false
1067	opt_force=false
1068	opt_install=false
1069	opt_dry_run=false
1070	opt_quiet=false
1071	opt_verbose=false
1072	opt_warning=:
1073	opt_nonrecursive=false
1074	opt_recursive=false
1075	opt_standalone=false
1076	opt_ltdl="false"
1077
1078
1079	# Parse options once, thoroughly. This comes as soon as possible in the
1080	# script to make things like `--version' happen as quickly as we can.
1081	{
1082	# this just eases exit handling
1083	while test $# -gt 0; do
1084	opt="$1"
1085	shift
1086	case $opt in
1087	--debug\|-x) opt_debug='set -x'
1088	func_echo "enabling shell trace mode"
1089	$opt_debug
1090	;;
1091	--copy\|-c)
1092	opt_copy=:
1093	;;
1094	--force\|-f)
1095	opt_force=:
1096	;;
1097	--install\|-i)
1098	opt_install=:
1099	;;
1100	--dry-run\|--dryrun\|-n)
1101	opt_dry_run=:
1102	CP="func_echo_all $CP"
1103	test -n "$LN_S" && LN_S="func_echo_all $LN_S"
1104	MKDIR="func_echo_all $MKDIR"
1105	RM="func_echo_all $RM"
1106	TAR="func_echo_all $TAR"
1107	;;
1108	--quiet\|--automake\|-q)
1109	opt_quiet=:
1110	;;
1111	--verbose\|-v)
1112	opt_verbose=:
1113	;;
1114	--no-warning\|--no-warn)
1115	opt_warning=false
1116	;;
1117	--nonrecursive\|--non-recursive)
1118	opt_nonrecursive=:
1119	;;
1120	--recursive)
1121	opt_recursive=:
1122	;;
1123	--standalone)
1124	opt_standalone=:
1125	;;
1126	--ltdl)
1127	optarg="$1"
1128	if test $# -gt 0; then
1129	case $optarg in # ((
1130	-*) ;;
1131	*) opt_ltdl="$optarg"; shift ;;
1132	esac
1133	fi
1134	# This is tricky, since we're overloading $opt_ltdl to be the
1135	# optarg for --ltdl during option processing, but then stashing
1136	# the (optional) optarg in $ltdldir and reusing $opt_ltdl to
1137	# indicate that --ltdl was seen during option processing. Also,
1138	# be careful that --ltdl=foo --ltdl=bar results in ltdldir=bar:
1139	case $opt_ltdl in
1140	false\|:) ;; # a bare '--ltdl' followed by another option
1141	) ltdldir=`$ECHO "$optarg" \| $SED 's,/$,,'` ;;
1142	esac
1143	opt_ltdl=:
1144	;;
1145
1146	-\?\|-h) func_usage ;;
1147	--help) func_help ;;
1148	--version) func_version ;;
1149
1150	# Separate optargs to long options:
1151	--=)
1152	func_split_long_opt "$opt"
1153	set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
1154	shift
1155	;;
1156
1157	# Separate non-argument short options:
1158	-\?\|-h\|-c\|-f\|-i\|-n\|-q\|-v)
1159	func_split_short_opt "$opt"
1160	set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
1161	shift
1162	;;
1163
1164	--) break ;;
1165	-*) func_fatal_help "unrecognized option \`$opt'" ;;
1166	*) set dummy "$opt" ${1+"$@"}; shift; break ;;
1167	esac
1168	done
1169
1170	# Validate options:
1171
1172	# show any warnings saved by LIBTOOLIZE_OPTIONS parsing
1173	test -n "$env_warning" &&
1174	echo "$env_warning" \|while read line; do func_warning "$line"; done
1175
1176	# validate $opt_nonrecursive, $opt_recursive and $opt_standalone
1177	if $opt_nonrecursive; then
1178	if $opt_recursive \|\| $opt_standalone; then
1179	func_error "you can have at most one of --non-recursive, --recursive and --standalone"
1180	fi
1181	ltdl_mode=nonrecursive
1182	elif $opt_recursive; then
1183	$opt_standalone &&
1184	func_error "you can have at most one of --non-recursive, --recursive and --standalone"
1185	ltdl_mode=recursive
1186	elif $opt_standalone; then
1187	ltdl_mode=standalone
1188	fi
1189
1190	# any remaining arguments are an error
1191	test $# -gt 0 &&
1192	func_fatal_help "unknown additional arguments: \`${1+}'"
1193
1194
1195	# Bail if the options were screwed
1196	$exit_cmd $EXIT_FAILURE
1197	}
1198
1199
1200
1201
1202	# func_echo_once msg_var
1203	# Calls func_echo with the value of MSG_VAR, and then sets MSG_VAR="" so
1204	# that subsequent calls have no effect.
1205	func_echo_once ()
1206	{
1207	$opt_debug
1208	if test -n "$1"; then
1209	eval my_msg=\$$1
1210
1211	if test -n "$my_msg"; then
1212	func_echo "$my_msg"
1213	eval $1=""
1214	fi
1215	fi
1216	}
1217
1218
1219	# func_copy srcfile destfile [msg_var]
1220	# A wrapper for func_copy_cb that accepts arguments in the same order
1221	# as the cp(1) shell command.
1222	func_copy ()
1223	{
1224	$opt_debug
1225
1226	test -f "$1" \|\| \
1227	{ func_error "\`$1' not copied: not a regular file"; return 1; }
1228
1229	func_dirname_and_basename "$1"
1230	my_f1=$func_basename_result
1231
1232	if test -d "$2"; then
1233
1234	func_copy_cb "$my_f1" \
1235	`$ECHO "$1" \| $SED "$dirname"` "$2" "$3"
1236
1237	else
1238
1239	# Supporting this would mean changing the timestamp:
1240	func_dirname_and_basename "$2"
1241	my_tname=$func_basename_result
1242	test "X$my_f1" = "X$my_tname" \
1243	\|\| func_fatal_error "func_copy() cannot change filename on copy"
1244
1245	func_copy_cb "$my_f1" \
1246	`$ECHO "$1" \| $SED "$dirname"` \
1247	`$ECHO "$2" \| $SED "$dirname"` \
1248	"$3"
1249
1250	fi
1251
1252	return $copy_return_status # set in func_copy_cb
1253	}
1254
1255
1256	# func_copy_cb filename srcdir destdir [msg_var]
1257	# If option `--copy' was specified, or soft-linking SRCFILE to DESTFILE fails,
1258	# then try to copy SRCFILE to DESTFILE (without changing the timestamp if
1259	# possible).
1260	func_copy_cb ()
1261	{
1262	$opt_debug
1263	my_file="$1"
1264	my_srcdir="$2"
1265	my_destdir="$3"
1266	my_msg_var="$4"
1267	copy_return_status=1
1268
1269	# Libtool is probably misinstalled if this happens:
1270	test -f "$my_srcdir/$my_file" \|\|
1271	func_fatal_error "\`$my_file' not found in \`$my_srcdir'"
1272
1273	case $opt_verbose in
1274	false) my_copy_msg="file \`$my_destdir/$my_file'" ;;
1275	*) my_copy_msg="file from \`$my_srcdir/$my_file'" ;;
1276	esac
1277	func_mkdir_p `$ECHO "$my_destdir/$my_file" \| $SED "$dirname"`
1278
1279	$RM "$my_destdir/$my_file"
1280	if $opt_copy; then
1281	if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
1282	\| ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1; } \
1283	&& touch "$my_destdir/$my_file"; then
1284	$opt_quiet \|\| func_echo_once "$my_msg_var"
1285	$opt_quiet \|\| func_echo "copying $my_copy_msg"
1286	copy_return_status=0
1287	fi
1288	else
1289	if test "$my_file" = "aclocal.m4"; then
1290	if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
1291	\| ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1 ; }
1292	then
1293	$opt_quiet \|\| func_echo_once "$my_msg_var"
1294	$opt_quiet \|\| func_echo "copying $my_copy_msg"
1295	copy_return_status=0
1296	fi
1297	else
1298	if $LN_S "$my_srcdir/$my_file" "$my_destdir/$my_file"; then
1299	$opt_quiet \|\| func_echo_once "$my_msg_var"
1300	$opt_quiet \|\| func_echo "linking $my_copy_msg"
1301	copy_return_status=0
1302	fi
1303	fi
1304	fi
1305	if test "$copy_return_status" != 0; then
1306	$opt_quiet \|\| func_echo_once "$my_msg_var"
1307	func_error "can not copy \`$my_srcdir/$my_file' to \`$my_destdir/'"
1308	exit_status=$EXIT_FAILURE
1309	fi
1310	}
1311
1312
1313	# func_copy_some_files srcfile_spec srcdir destdir [msg_var] [cb=func_copy_cb]
1314	# Call COPY_CB for each regular file in SRCDIR named by the ':' delimited
1315	# names in SRCFILE_SPEC. The odd calling convention is needed to allow
1316	# spaces in file and directory names.
1317	func_copy_some_files ()
1318	{
1319	$opt_debug
1320	my_srcfile_spec="$1"
1321	my_srcdir="$2"
1322	my_destdir="$3"
1323	my_msg_var="$4"
1324	my_copy_cb="${5-func_copy_cb}"
1325
1326	my_save_IFS="$IFS"
1327	IFS=:
1328	for my_filename in $my_srcfile_spec; do
1329	IFS="$my_save_IFS"
1330	if test -f "$my_srcdir/$my_filename"; then
1331	if test "X$my_copy_cb" = Xfunc_copy_cb; then
1332	$opt_force \|\| if test -f "$my_destdir/$my_filename"; then
1333	$opt_quiet \|\| func_echo_once "$my_msg_var"
1334	$opt_quiet \
1335	\|\| func_error "\`$my_destdir/$my_filename' exists: use \`--force' to overwrite"
1336	continue
1337	fi
1338	fi
1339	else
1340	func_echo_once "$my_msg_var"
1341	func_fatal_error "\`$my_filename' not found in \`$my_srcdir'"
1342	fi
1343
1344	$my_copy_cb "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
1345	done
1346	IFS="$my_save_IFS"
1347	}
1348
1349
1350	# func_fixup_Makefile srcfile srcdir destdir
1351	func_fixup_Makefile ()
1352	{
1353	$opt_debug
1354	my_filename="$1"
1355	my_srcdir="$2"
1356	my_destdir="$3"
1357	my_fixup_non_subpackage_script="\
1358	s,(LIBOBJS),(ltdl_LIBOBJS),g
1359	s,(LTLIBOBJS),(ltdl_LTLIBOBJS),g
1360	s,libltdl/configure.ac,,
1361	s,libltdl/configure,,
1362	s,libltdl/aclocal.m4,,
1363	s,libltdl/config-h.in,,
1364	s,libltdl/Makefile.am,,
1365	s,libltdl/Makefile.in,,
1366	/^[ ]*\\\\\$/d"
1367	case $my_filename in
1368	Makefile.am)
1369	my_fixup_non_subpackage_script=`echo "$my_fixup_non_subpackage_script" \| \
1370	sed 's,libltdl/,,'`
1371	my_fixup_inc_paths_script= ;;
1372	Makefile.inc)
1373	repl=$ltdldir
1374	repl_uscore=`$ECHO "$repl" \| $SED 's,[/.+-],_,g'`
1375	my_fixup_inc_paths_script="\
1376	s,libltdl_,@repl_uscore@_,
1377	s,libltdl/,@repl@/,
1378	s,: libltdl/,: @repl@/,
1379	s, -Ilibltdl , -I@repl@ ,
1380	s,\\\$(libltdl_,\$(@repl_uscore@_,
1381	s,)/libltdl ,)/@repl@ ,
1382	s,@repl_uscore@,${repl_uscore},g
1383	s,@repl@,${repl},g"
1384	;;
1385	esac
1386
1387	$RM "$my_destdir/$my_filename" 2>/dev/null
1388	$opt_quiet \|\| func_echo "creating file \`$my_destdir/$my_filename'"
1389	if $opt_dry_run; then :;
1390	else
1391	$SED "$my_fixup_non_subpackage_script
1392	$my_fixup_inc_paths_script" \
1393	< "$my_srcdir/$my_filename" > "$my_destdir/$my_filename" \|\|
1394	func_fatal_error "cannot create $my_destdir/$my_filename"
1395	fi
1396	}
1397
1398	# func_scan_files
1399	# Scan configure.(ac\|in) and aclocal.m4 (if present) for use of libltdl
1400	# and libtool. Possibly running some of these tools if necessary.
1401	# Libtoolize affects the contents of aclocal.m4, and should be run before
1402	# aclocal, so we can't use configure --trace which relies on a consistent
1403	# configure.(ac\|in) and aclocal.m4.
1404	func_scan_files ()
1405	{
1406	$opt_debug
1407	# Prefer configure.ac to configure.in
1408	test -f configure.ac && configure_ac=configure.ac
1409	test -f "$configure_ac" \|\| configure_ac=
1410
1411	# Set local variables to reflect contents of configure.ac
1412	my_sed_scan_configure_ac='s,#.$,,; s,^dnl .$,,; s, dnl .*$,,;
1413	/AC_INIT/ {
1414	s,^.*$,seen_autoconf=:,
1415	p
1416	}
1417	d'
1418	test -z "$configure_ac" \
1419	\|\| eval `$SED "$my_sed_scan_configure_ac" "$configure_ac"`
1420
1421	$seen_autoconf \|\| {
1422	my_configure_ac=
1423	test -n "$configure_ac" && my_configure_ac="$configure_ac: "
1424	func_verbose "${my_configure_ac}not using Autoconf"
1425
1426	# Make sure ltdldir and ltdl_mode have sensible defaults
1427	# since we return early here:
1428	test -n "$ltdldir" \|\| ltdldir=libltdl
1429	test -n "$ltdl_mode" \|\| ltdl_mode=subproject
1430
1431	return
1432	}
1433
1434	# ---------------------------------------------------- #
1435	# Probe macro usage in configure.ac and/or aclocal.m4. #
1436	# ---------------------------------------------------- #
1437
1438	my_sed_traces='s,#.$,,; s,^dnl .$,,; s, dnl .*$,,
1439	s,^.AC_REQUIRE(.$,,; s,^.m4_require(.$,,;
1440	s,^.m4_define(.$,,
1441	s,^.A[CU]_DEFUN(.$,,; s,^.m4_defun(.$,,
1442	/AC_CONFIG_AUX_DIR(/ {
1443	s,^.AC_CONFIG_AUX_DIR([[ ]$[^])]$.$,ac_auxdir=\1,
1444	p
1445	}
1446	/AC_CONFIG_MACRO_DIR(/ {
1447	s,^.AC_CONFIG_MACRO_DIR([[ ]$[^])]$.$,ac_macrodir=\1,
1448	p
1449	}
1450	/_LT_CONFIG_LTDL_DIR(/d
1451	/LT_CONFIG_LTDL_DIR(/ {
1452	s,^.LT_CONFIG_LTDL_DIR([[ ]$[^])]$.$,ac_ltdldir=\1,
1453	p
1454	}
1455	/\[A[CM]_PROG_LIBTOOL/d
1456	/A[CM]_PROG_LIBTOOL/ {
1457	s,^.*$,seen_libtool=:,
1458	p
1459	}
1460	/the.option into.LT_INIT.*parameter/d
1461	/\[LT_INIT/d
1462	/LT_INIT/ {
1463	s,^.*$,seen_libtool=:,
1464	p
1465	}
1466	/\[LTDL_INIT/d
1467	/LTDL_INIT/ {
1468	s,^.LTDL_INIT([[ ]$[^])]$.$,ltdl_options="\1",
1469	s,^.LTDL_INIT[ ]$,seen_ltdl=:,
1470	p
1471	}
1472	/LT_WITH_LTDL/ {
1473	s,^.*$,seen_ltdl=:,
1474	p
1475	}
1476	/AC_LIB_LTDL/ {
1477	s,^.*$,seen_ltdl=:,
1478	p
1479	}
1480	/AC_WITH_LTDL/ {
1481	s,^.*$,seen_ltdl=:,
1482	p
1483	}
1484	d'
1485	eval `cat aclocal.m4 "$configure_ac" 2>/dev/null \| $SED "$my_sed_traces"`
1486
1487
1488	# ----------------- #
1489	# Validate ltdldir. #
1490	# ----------------- #
1491
1492	ac_ltdldir=`$ECHO "$ac_ltdldir" \| $SED 's,/*$,,'`
1493
1494	# If $configure_ac contains AC_CONFIG_LTDL_DIR, check that its
1495	# arguments were not given in terms of a shell variable!
1496	case "$ac_ltdldir" in
1497	\$)
1498	func_fatal_error "can not handle variables in LT_CONFIG_LTDL_DIR"
1499	;;
1500	esac
1501
1502	# If neither --ltdl nor LT_CONFIG_LTDL_DIR are specified, default to
1503	# `libltdl'. If both are specified, they must be the same. Otherwise,
1504	# take the one that is given! (If LT_CONFIG_LTDL_DIR is not specified
1505	# we suggest adding it later in this code.)
1506	case x$ac_ltdldir,x$ltdldir in
1507	x,x) ltdldir=libltdl ;;
1508	x*,x) ltdldir=$ac_ltdldir ;;
1509	x,x*) ltdldir=$ltdldir ;;
1510	*)
1511	test x"$ac_ltdldir" = x"$ltdldir" \|\| \
1512	func_fatal_error "--ltdl='$ltdldir' does not match LT_CONFIG_LTDL_DIR($ac_ltdldir)"
1513	;;
1514	esac
1515
1516
1517	# ------------------- #
1518	# Validate ltdl_mode. #
1519	# ------------------- #
1520
1521	test -n "$ltdl_options" && seen_ltdl=:
1522
1523	# If $configure_ac contains LTDL_INIT, check that its
1524	# arguments were not given in terms of a shell variable!
1525	case "$ltdl_options" in
1526	\$)
1527	func_fatal_error "can not handle variables in LTDL_INIT"
1528	;;
1529	esac
1530
1531	# Extract mode name from ltdl_options
1532	# FIXME: Diagnose multiple conflicting modes in ltdl_options
1533	ac_ltdl_mode=
1534	case " $ltdl_options " in
1535	" nonrecursive ") ac_ltdl_mode=nonrecursive ;;
1536	" recursive ") ac_ltdl_mode=recursive ;;
1537	" subproject ") ac_ltdl_mode=subproject ;;
1538	esac
1539
1540	# If neither --ltdl nor an LTDL_INIT mode are specified, default to
1541	# `subproject'. If both are specified, they must be the same. Otherwise,
1542	# take the one that is given!
1543	case x$ac_ltdl_mode,x$ltdl_mode in
1544	x,x) ltdl_mode=subproject ;;
1545	x*,x) ltdl_mode=$ac_ltdl_mode ;;
1546	x,x*) ltdl_mode=$ltdl_mode ;;
1547	*)
1548	test x"$ac_ltdl_mode" = x"$ltdl_mode" \|\| \
1549	func_fatal_error "--$ltdl_mode does not match LTDL_INIT($ac_ltdl_mode)"
1550	;;
1551	esac
1552
1553	# ---------------- #
1554	# Validate auxdir. #
1555	# ---------------- #
1556
1557	if test -n "$ac_auxdir"; then
1558	# If $configure_ac contains AC_CONFIG_AUX_DIR, check that it was
1559	# not given in terms of a shell variable!
1560	case "$ac_auxdir" in
1561	\$)
1562	func_fatal_error "can not handle variables in AC_CONFIG_AUX_DIR"
1563	;;
1564	*)
1565	auxdir=$ac_auxdir
1566	;;
1567	esac
1568	else
1569	# Try to discover auxdir the same way it is discovered by configure.
1570	# Note that we default to the current directory.
1571	for dir in . .. ../..; do
1572	if test -f "$dir/install-sh"; then
1573	auxdir=$dir
1574	break
1575	elif test -f "$dir/install.sh"; then
1576	auxdir="$dir"
1577	break
1578	fi
1579	done
1580	fi
1581
1582	# Just use the current directory if all else fails.
1583	test -n "$auxdir" \|\| auxdir=.
1584
1585
1586	# ------------------------------ #
1587	# Find local m4 macro directory. #
1588	# ------------------------------ #
1589
1590	# Hunt for ACLOCAL_AMFLAGS in `Makefile.am' for a `-I' argument.
1591
1592	my_sed_aclocal_flags='
1593	/^[ ]ACLOCAL_[A-Z_]FLAGS[ ]=[ ]/ {
1594	s,,,
1595	q
1596	}
1597	d'
1598	if test -f Makefile.am; then
1599	my_macrodir_is_next=false
1600	for arg in `$SED "$my_sed_aclocal_flags" Makefile.am`; do
1601	if $my_macrodir_is_next; then
1602	am_macrodir="$arg"
1603	break
1604	else
1605	case $arg in
1606	-I) my_macrodir_is_next=: ;;
1607	-I*)
1608	am_macrodir=`$ECHO "$arg" \| sed 's,^-I,,'`
1609	break
1610	;;
1611	*) my_macrodir_is_next=false ;;
1612	esac
1613	fi
1614	done
1615	fi
1616
1617	macrodir="$ac_macrodir"
1618	test -z "$macrodir" && macrodir="$am_macrodir"
1619
1620	if test -n "$am_macrodir" && test -n "$ac_macrodir"; then
1621	test "$am_macrodir" = "$ac_macrodir" \
1622	\|\| func_fatal_error "AC_CONFIG_MACRO_DIR([$ac_macrodir]) conflicts with ACLOCAL_AMFLAGS=-I $am_macrodir."
1623	fi
1624	}
1625
1626	# func_included_files searchfile
1627	# Output INCLUDEFILE if SEARCHFILE m4_includes it, else output SEARCHFILE.
1628	func_included_files ()
1629	{
1630	$opt_debug
1631	my_searchfile="$1"
1632
1633	my_include_regex=
1634	my_sed_include='
1635	/^m4_include(\[.*\])$/ {
1636	s,^m4_include(\[$.*$\])$,\1,
1637	p
1638	}
1639	d'
1640
1641	if test -f "$my_searchfile"; then
1642	$ECHO "$my_searchfile"
1643
1644	# Only recurse when we don't care if all the variables we use get
1645	# trashed, since they are in global scope.
1646	for my_filename in `$SED "$my_sed_include" "$my_searchfile"`; do
1647	func_included_files $my_filename
1648	done
1649	fi
1650	}
1651
1652
1653	# func_serial filename [macro_regex]
1654	# Output the value of the serial number comment in FILENAME, where the
1655	# comment line must also match MACRO_REGEX, if given.
1656	func_serial ()
1657	{
1658	$opt_debug
1659	my_filename="$1"
1660	my_macro_regex="$2"
1661	my_sed_serial='
1662	/^# serial [1-9][0-9.][ ]'"$my_macro_regex"'[ ]*$/ {
1663	s,^# serial $[1-9][0-9.]$.$,\1,
1664	q
1665	}
1666	d'
1667
1668	# Search FILENAME and all the files it m4_includes for a serial number
1669	# in the file that AC_DEFUNs MACRO_REGEX.
1670	my_serial=
1671	func_dirname_and_basename "$my_filename"
1672	my_filebase=$func_basename_result
1673	for my_file in `func_included_files "$my_filename"`; do
1674	if test -z "$my_macro_regex" \|\|
1675	test "$my_filename" = aclocal.m4 \|\|
1676	test "X$my_macro_regex" = "X$my_filebase" \|\|
1677	func_grep '^AC_DEFUN(\['"$my_macro_regex" "$my_file"
1678	then
1679	my_serial=`$SED -e "$my_sed_serial" "$my_file"`
1680	break
1681	fi
1682	done
1683
1684	# If the file has no serial number, we assume it's ancient.
1685	test -n "$my_serial" \|\| my_serial=0
1686
1687	$ECHO "$my_serial"
1688	}
1689
1690
1691	# func_serial_max serial1 serial2
1692	# Compare (possibly multi-part, '.' delimited) serial numbers, and
1693	# return the largest in $func_serial_max_result. If they are the
1694	# same, func_serial_max_result will be empty.
1695	func_serial_max ()
1696	{
1697	$opt_debug
1698	my_serial1="$1"
1699	my_serial2="$2"
1700
1701	my_sed_dot='s/\..*$//g'
1702	my_sed_rest='s/^[0-9][1-9]\.//'
1703	my_sed_digits='s/[^0-9.]//g'
1704
1705	# Incase they turn out to be the same, we'll set it to empty
1706	func_serial_max_result=
1707
1708	test "X$1$2" = X`$ECHO "$1$2" \| $SED "$my_sed_digits"` \|\| {
1709	func_error "serial numbers \`$1' or \`$2' contain non-digit chars"
1710	return
1711	}
1712
1713	while test -n "$my_serial1$my_serial2"; do
1714	my_serial1_part=`$ECHO "$my_serial1" \| $SED "$my_sed_dot"`
1715	my_serial2_part=`$ECHO "$my_serial2" \| $SED "$my_sed_dot"`
1716
1717	test -z "$my_serial1_part$my_serial2_part" \
1718	&& break
1719
1720	test -z "$my_serial1_part" \
1721	&& { func_serial_max_result="$2"; break; }
1722
1723	test -z "$my_serial2_part" \
1724	&& { func_serial_max_result="$1"; break; }
1725
1726	test "$my_serial1_part" -gt "$my_serial2_part" \
1727	&& { func_serial_max_result="$1"; break; }
1728
1729	test "$my_serial2_part" -gt "$my_serial1_part" \
1730	&& { func_serial_max_result="$2"; break; }
1731
1732	my_serial1=`$ECHO "$my_serial1" \| $SED "$my_sed_rest"`
1733	my_serial2=`$ECHO "$my_serial2" \| $SED "$my_sed_rest"`
1734	done
1735	}
1736
1737
1738	# func_serial_update_check srcfile src_serial destfile dest_serial
1739	# Unless SRC_SERIAL is newer than DEST_SERIAL set $func_serial_update_check
1740	# to 'false'.
1741	func_serial_update_check ()
1742	{
1743	$opt_debug
1744	my_srcfile="$1"
1745	my_src_serial="$2"
1746	my_destfile="$3"
1747	my_dest_serial="$4"
1748	my_update_p=:
1749
1750	if test -f "$my_destfile"; then
1751	test "X$my_src_serial" = "X0" && {
1752	func_warning "no serial number on \`$my_srcfile', not copying."
1753	return
1754	}
1755
1756	# Determine whether the destination has an older serial.
1757	func_serial_max "$my_src_serial" "$my_dest_serial"
1758	test "X$my_src_serial" = "X$func_serial_max_result" \|\| my_update_p=false
1759
1760	test "X$my_src_serial" = "X$func_serial_max_result" \
1761	&& func_verbose "\`$my_srcfile' is serial $my_src_serial, greater than $my_dest_serial in \`$my_destfile'"
1762
1763	if test "X$my_dest_serial" = "X$func_serial_max_result"; then
1764	func_verbose "\`$my_srcfile' is serial $my_src_serial, less than $my_dest_serial in \`$my_destfile'"
1765	$opt_force \|\| if test -n "$ac_macrodir$ac_ltdldir"; then
1766	func_error "\`$my_destfile' is newer: use \`--force' to overwrite"
1767	fi
1768	fi
1769	fi
1770
1771	func_serial_update_check_result="$my_update_p"
1772	}
1773
1774
1775	# func_aclocal_update_check filename
1776	# Unless serial number of FILENAME is newer than the matching serial number
1777	# in aclocal.m4, set $func_aclocal_update_check to 'false'.
1778	func_aclocal_update_check ()
1779	{
1780	$opt_debug
1781	my_srcfile="$aclocaldir/$1"
1782	my_destfile="aclocal.m4"
1783
1784	case $need in
1785	libtool.m4)
1786	my_src_serial=`func_serial "$my_srcfile" LT_INIT`
1787	my_dest_serial=`func_serial "$my_destfile" LT_INIT`
1788
1789	# Strictly, this libtoolize ought not to have to deal with ancient
1790	# serial formats, but we accept them here to be complete:
1791	test "X$my_src_serial" = "X0" &&
1792	my_src_serial=`func_serial "$my_srcfile" 'A[CM]_PROG_LIBTOOL'`
1793	test "X$my_dest_serial" = "X0" &&
1794	my_dest_serial=`func_serial "$my_destfile" 'A[CM]_PROG_LIBTOOL'`
1795	;;
1796	ltdl.m4)
1797	my_src_serial=`func_serial "$my_srcfile" LTDL_INIT`
1798	my_dest_serial=`func_serial "$my_destfile" LTDL_INIT`
1799	;;
1800	*)
1801	my_src_serial=`func_serial "$my_srcfile" "$need"`
1802	my_dest_serial=`func_serial "$my_destfile" "$need"`
1803	;;
1804	esac
1805
1806	func_serial_update_check \
1807	"$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
1808
1809	func_aclocal_update_check_result="$func_serial_update_check_result"
1810	}
1811
1812
1813	# func_serial_update filename srcdir destdir [msg_var] [macro_re] [old_macro_re]
1814	# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
1815	# has a newer serial number, or DESTFILE does not yet exist, or the user
1816	# specified `--force' at the command line. If given, MACRO_REGEX or
1817	# OLD_MACRO_REGEX must match any text after "# serial N" in both files.
1818	func_serial_update ()
1819	{
1820	$opt_debug
1821	my_filename="$1"
1822	my_srcdir="$2"
1823	my_destdir="$3"
1824	my_msg_var="$4"
1825	my_macro_regex="$5"
1826	my_old_macro_regex="$6"
1827
1828	my_serial_update_p=:
1829	my_return_status=1
1830	my_srcfile="$my_srcdir/$my_filename"
1831	my_destfile="$my_destdir/$my_filename"
1832
1833	test -f "$my_srcfile" \|\| func_fatal_error "\`$my_srcfile' does not exist."
1834
1835	if test -f "$my_destfile"; then
1836	my_src_serial=`func_serial "$my_srcfile" "$my_macro_regex"`
1837	my_dest_serial=`func_serial "$my_destfile" "$my_macro_regex"`
1838
1839	# Strictly, this libtoolize ought not to have to deal with ancient
1840	# serial formats, but we accept them here to be complete:
1841	test "X$my_src_serial" = "X0" &&
1842	my_src_serial=`func_serial "$my_srcfile" "$my_old_macro_regex"`
1843
1844	test "X$my_dest_serial" = "X0" &&
1845	my_dest_serial=`func_serial "$my_destfile" "$my_old_macro_regex"`
1846
1847	func_serial_update_check \
1848	"$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
1849	my_serial_update_p="$func_serial_update_check_result"
1850	fi
1851
1852	if $my_serial_update_p \|\| $opt_force; then
1853	func_copy "$my_srcfile" "$my_destfile" "$my_msg_var"
1854	my_return_status=$?
1855	elif $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
1856	$opt_quiet \|\| func_echo_once "$my_msg_var"
1857	$opt_quiet \
1858	\|\| func_echo "\`$my_destfile' is already up to date."
1859	fi
1860
1861	# Do this after the copy for hand maintained `aclocal.m4', incase
1862	# it has `m4_include([DESTFILE])', so the copy effectively already
1863	# updated `aclocal.m4'.
1864	my_included_files=`func_included_files aclocal.m4`
1865	case `echo " $my_included_files " \| $NL2SP` in
1866
1867	# Skip included files:
1868	" $my_destfile ") ;;
1869
1870	# Otherwise compare to aclocal.m4 serial number (func_serial
1871	# returns 0 for older macro serial numbers before we provided
1872	# serial tags, so the update message will be correctly given
1873	# if aclocal.m4 contains an untagged --i.e older-- macro file):
1874	*)
1875	if test -f aclocal.m4; then
1876	func_serial_max \
1877	"$my_src_serial" `func_serial aclocal.m4 "$my_macro_regex"`
1878	if test "X$my_src_serial" = "X$func_serial_max_result"; then
1879	func_echo_once "$my_msg_var"
1880	func_echo "You should add the contents of \`$my_destfile' to \`aclocal.m4'."
1881	fi
1882	fi
1883	;;
1884	esac
1885	return $my_return_status
1886	}
1887
1888
1889	# func_keyword_update filename srcdir destdir sed_script [msg_var]
1890	# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
1891	# has a newer revision according to the serial number extracted by
1892	# SED_SCRIPT, or DESTFILE does not yet exist, or the user specified
1893	# `--force' at the command line.
1894	func_keyword_update ()
1895	{
1896	$opt_debug
1897	my_filename="$1"
1898	my_srcdir="$2"
1899	my_destdir="$3"
1900	my_sed_script="$4"
1901	my_msg_var="$5"
1902
1903	my_srcfile="$my_srcdir/$my_filename"
1904	my_destfile="$my_destdir/$my_filename"
1905
1906	my_keyword_update_p=:
1907
1908	test -f "$my_srcfile" \|\| func_fatal_error "\`$my_srcfile' does not exist."
1909
1910	if test -f "$my_destfile"; then
1911	my_src_serial=`$SED -e "$my_sed_script" "$my_srcfile"`
1912	test -z "$my_src_serial" && {
1913	func_warning "no serial number in \`$my_srcfile', not copying."
1914	return
1915	}
1916
1917	my_dest_serial=`$SED -e "$my_sed_script" "$my_destfile"`
1918	test -n "$my_dest_serial" \|\| my_dest_serial=0
1919
1920	func_serial_update_check \
1921	"$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
1922	my_keyword_update_p="$func_serial_update_check_result"
1923	fi
1924
1925	if $my_keyword_update_p \|\| $opt_force; then
1926	func_copy "$my_srcfile" "$my_destfile" "$my_msg_var"
1927	elif $opt_verbose \|\| $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
1928	func_echo_once "$my_msg_var"
1929	func_echo "\`$my_destfile' is already up to date."
1930	fi
1931	}
1932
1933
1934	# func_ltmain_update filename srcdir destdir [msg_var]
1935	# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
1936	# has a newer revision, or DESTFILE does not yet exist, or the user
1937	# specified `--force' at the command line.
1938	func_ltmain_update ()
1939	{
1940	$opt_debug
1941	my_sed_ltmain='
1942	/^package_revision='\''[0-9][1-9.]'\''*/ {
1943	s,^package_revision='\''$[0-9.]$'\''[ ]$,\1,
1944	p
1945	}
1946	d'
1947
1948	func_keyword_update "$1" "$2" "$3" "$my_sed_ltmain" "$4"
1949
1950	return $my_return_status
1951	}
1952
1953
1954	# func_config_update filename srcdir destdir [msg_var]
1955	# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
1956	# has a newer timestamp, or DESTFILE does not yet exist, or the user
1957	# specified `--force' at the command line.
1958	func_config_update ()
1959	{
1960	$opt_debug
1961	my_sed_config='
1962	/^timestamp='\''[0-9][1-9-]'\''*/ {
1963	s,^timestamp='\''$[0-9-]$'\''*,\1,
1964	s/-/./g
1965	p
1966	}
1967	d'
1968
1969	func_keyword_update "$1" "$2" "$3" "$my_sed_config" "$4"
1970
1971	return $my_return_status
1972	}
1973
1974
1975	# func_install_update filename srcdir destdir [msg_var]
1976	# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
1977	# has a newer timestamp, or DESTFILE does not yet exist, or the user
1978	# specified `--force' at the command line.
1979	func_install_update ()
1980	{
1981	$opt_debug
1982	my_sed_install='
1983	/^scriptversion='\''[0-9][1-9.-]'\''*/ {
1984	s,[#;].*,,
1985	s,^scriptversion='\''$[0-9.-]$'\''*,\1,
1986	s/-/./g
1987	p
1988	}
1989	d'
1990
1991	func_keyword_update "$1" "$2" "$3" "$my_sed_install" "$4"
1992
1993	return $my_return_status
1994	}
1995
1996
1997	# func_massage_aclocal_DATA [glob_exclude]
1998	# @aclocal_DATA\@ is substituted as per its value in Makefile.am;
1999	# this function massages it into a suitable format for func_copy_some_files.
2000	func_massage_aclocal_DATA ()
2001	{
2002	$opt_debug
2003	pkgmacro_files= # GLOBAL VAR
2004
2005	my_glob_exclude="$1"
2006
2007	# Massage a value for pkgmacro_files from the value used in Makefile.am.
2008	for my_filename in m4/argz.m4 m4/libtool.m4 m4/ltdl.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4; do
2009	func_dirname_and_basename "$my_filename"
2010	my_filename=$func_basename_result
2011
2012	# ignore excluded filenames
2013	if test -n "$my_glob_exclude"; then
2014	my_cont=false
2015	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
2016	$my_cont && continue
2017	fi
2018
2019	pkgmacro_files="$pkgmacro_files:$my_filename"
2020	done
2021
2022	# strip spurious leading `:'
2023	pkgmacro_files=`$ECHO "$pkgmacro_files" \| $SED 's,^:*,,'`
2024	}
2025
2026
2027	# func_install_pkgmacro_subproject
2028	# Unless --quiet was passed, display a message. Then copy pkgmacro_files
2029	# from libtool installation tree to subproject libltdl tree.
2030	func_install_pkgmacro_subproject ()
2031	{
2032	$opt_debug
2033
2034	# Remove any lingering files that my have been installed by some
2035	# previous libtoolize release:
2036	$opt_force && for file in $all_pkgmacro_files; do
2037	test -f "$subproject_macrodir/$file" && func_verbose "rm -f '$subproject_macrodir/$file'"
2038	rm -f "$subproject_macrodir/$file"
2039	done
2040
2041	# Copy all the files from installed libltdl to this project, if the
2042	# user specified a macrodir.
2043	$opt_quiet \|\| if test "x$macrodir" != "x$subproject_macrodir"; then
2044	pkgmacro_header="putting macros in \`$subproject_macrodir'."
2045	elif test -n "$subproject_macrodir"; then
2046	pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$subproject_macrodir'."
2047	fi
2048
2049	func_copy_some_files "argz.m4:libtool.m4:ltdl.m4:$pkgmacro_files" \
2050	"$aclocaldir" "$subproject_macrodir" pkgmacro_header
2051	}
2052
2053
2054	# func_install_pkgmacro_parent
2055	# Unless --quiet was passed, or AC_CONFIG_MACRO_DIR was not seen, display
2056	# a message. Then update appropriate macros if newer ones are available
2057	# from the libtool installation tree.
2058	func_install_pkgmacro_parent ()
2059	{
2060	$opt_debug
2061
2062	# Remove any lingering files that my have been installed by some
2063	# previous libtoolize release:
2064	$opt_force && for file in $all_pkgmacro_files; do
2065	test -f "$macrodir/$file" && func_verbose "rm -f '$macrodir/$file'"
2066	rm -f "$macrodir/$file"
2067	done
2068
2069	# Copy all the files from installed libltdl to this project, if the
2070	# user specified a macrodir.
2071	$opt_quiet \|\| if test -n "$ac_macrodir"; then
2072	my_pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$ac_macrodir'."
2073	elif test -n "$macrodir"; then
2074	my_pkgmacro_header="putting macros in \`$macrodir'."
2075	fi
2076
2077	if $opt_ltdl; then
2078	func_serial_update argz.m4 "$aclocaldir" "$macrodir" \
2079	my_pkgmacro_header argz.m4
2080	else
2081	func_verbose "Not copying \`$macrodir/argz.m4', libltdl not used."
2082	fi
2083
2084	func_serial_update libtool.m4 "$aclocaldir" "$macrodir" \
2085	my_pkgmacro_header LT_INIT 'A[CM]_PROG_LIBTOOL'
2086
2087	if $opt_ltdl; then
2088	func_serial_update ltdl.m4 "$aclocaldir" "$macrodir" \
2089	my_pkgmacro_header 'LTDL_INIT'
2090	else
2091	func_verbose "Not copying \`$macrodir/ltdl.m4', libltdl not used."
2092	fi
2093
2094	my_save_IFS="$IFS"
2095	IFS=:
2096	for file in $pkgmacro_files; do
2097	IFS="$my_save_IFS"
2098	func_serial_update "$file" "$aclocaldir" "$macrodir" \
2099	my_pkgmacro_header "$file"
2100	done
2101	IFS="$my_save_IFS"
2102	}
2103
2104
2105	# func_install_pkgmacro_files
2106	# Install copies of the libtool and libltdl m4 macros into this package.
2107	func_install_pkgmacro_files ()
2108	{
2109	$opt_debug
2110
2111	# argz.m4, libtool.m4 and ltdl.m4 are handled specially:
2112	func_massage_aclocal_DATA 'argz.m4\|libtool.m4\|ltdl.m4'
2113
2114	# 1. Parent has separate macrodir to subproject ltdl:
2115	if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" &&
2116	test -n "$macrodir" && test "x$macrodir" != "x$subproject_macrodir"
2117	then
2118	func_install_pkgmacro_parent
2119	func_install_pkgmacro_subproject
2120
2121	# 2. Parent shares macrodir with subproject ltdl:
2122	elif $opt_ltdl && test "x$ltdl_mode" = "xsubproject"
2123	# && test "x$macrodir" = "x$subproject_macrodir"
2124	then
2125	func_install_pkgmacro_subproject
2126
2127	# 3. Not a subproject, but macrodir was specified in parent:
2128	elif test -n "$macrodir"; then
2129	func_install_pkgmacro_parent
2130
2131	# 4. AC_CONFIG_MACRO_DIR was not specified:
2132	else
2133	func_verbose "AC_CONFIG_MACRO_DIR not defined, not copying libtool macros."
2134	fi
2135	}
2136
2137
2138	# func_massage_pkgltdl_files [glob_exclude]
2139	# @pkgltdl_files\@ is substituted as per its value in Makefile.am; this
2140	# function massages it into a suitable format for func_copy_some_files.
2141	func_massage_pkgltdl_files ()
2142	{
2143	$opt_debug
2144	pkgltdl_files= # GLOBAL VAR
2145
2146	my_glob_exclude="$1"
2147
2148	# Massage a value for pkgltdl_files from the value used in Makefile.am
2149	for my_filename in libltdl/COPYING.LIB libltdl/README libltdl/Makefile.inc libltdl/Makefile.am libltdl/configure.ac libltdl/aclocal.m4 libltdl/Makefile.in libltdl/config-h.in libltdl/configure libltdl/argz_.h libltdl/argz.c libltdl/loaders/dld_link.c libltdl/loaders/dlopen.c libltdl/loaders/dyld.c libltdl/loaders/load_add_on.c libltdl/loaders/loadlibrary.c libltdl/loaders/shl_load.c libltdl/lt__dirent.c libltdl/lt__strl.c libltdl/libltdl/lt__alloc.h libltdl/libltdl/lt__dirent.h libltdl/libltdl/lt__glibc.h libltdl/libltdl/lt__private.h libltdl/libltdl/lt__strl.h libltdl/libltdl/lt_dlloader.h libltdl/libltdl/lt_error.h libltdl/libltdl/lt_system.h libltdl/libltdl/slist.h libltdl/loaders/preopen.c libltdl/lt__alloc.c libltdl/lt_dlloader.c libltdl/lt_error.c libltdl/ltdl.c libltdl/ltdl.h libltdl/slist.c; do
2150
2151	# Strip surplus leading 'libltdl/':
2152	my_filename=`expr "X$my_filename" : 'Xlibltdl/$.*$'`
2153
2154	# ignore excluded filenames
2155	if test -n "$my_glob_exclude"; then
2156	my_cont=false
2157	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
2158	$my_cont && continue
2159	fi
2160
2161	# ignore duplicates
2162	case :$pkgltdl_files: in
2163	:$my_filename:) ;;
2164	*) pkgltdl_files="$pkgltdl_files:$my_filename" ;;
2165	esac
2166	done
2167
2168	# strip spurious leading `:'
2169	pkgltdl_files=`$ECHO "$pkgltdl_files" \| $SED 's,^:*,,'`
2170	}
2171
2172
2173	# func_install_pkgltdl_files
2174	# Install copies of the libltdl files into this package. Any auxiliary
2175	# or m4 macro files needed in the libltdl tree will also be copied by
2176	# func_install_pkgconfig_files and func_install_pkgmacro_files resp.
2177	func_install_pkgltdl_files ()
2178	{
2179	$opt_debug
2180	$opt_ltdl \|\| return
2181
2182	# Remove any lingering files that my have been installed by some
2183	# previous libtoolize release:
2184	$opt_force && for file in $all_pkgltdl_files; do
2185	test -f "$ltdldir/$file" && func_verbose "rm -f '$ltdldir/$file'"
2186	rm -f "$ltdldir/$file"
2187	done
2188
2189	# Copy all the files from installed libltdl to this project, if the
2190	# user specified `--ltdl'.
2191	$opt_quiet \|\| if test -n "$ac_ltdldir"; then
2192	pkgltdl_header="putting libltdl files in LT_CONFIG_LTDL_DIR, \`$ac_ltdldir'."
2193	elif test -n "$ltdldir"; then
2194	pkgltdl_header="putting libltdl files in \`$ltdldir'."
2195	fi
2196
2197	# These files are handled specially, depending on ltdl_mode:
2198	if test "x$ltdl_mode" = "xsubproject"; then
2199	func_massage_pkgltdl_files 'Makefile.inc'
2200	else
2201	func_massage_pkgltdl_files 'Makefile.am\|Makefile.in\|aclocal.m4\|config'
2202	fi
2203
2204	func_copy_some_files "$pkgltdl_files" \
2205	"$pkgltdldir/libltdl" "$ltdldir" pkgltdl_header
2206
2207	# For recursive ltdl modes, copy a suitable Makefile.{am,inc}:
2208	case $ltdl_mode in
2209	recursive)
2210	func_fixup_Makefile "Makefile.am" "$pkgltdldir/libltdl" "$ltdldir"
2211	;;
2212	nonrecursive)
2213	func_fixup_Makefile "Makefile.inc" "$pkgltdldir/libltdl" "$ltdldir"
2214	;;
2215	esac
2216	}
2217
2218
2219	# func_massage_pkgconfig_files [glob_exclude]
2220	# @pkgconfig_files\@ is substituted as per its value in Makefile.am; this
2221	# function massages it into a suitable format for func_copy_some_files.
2222	func_massage_pkgconfig_files ()
2223	{
2224	$opt_debug
2225	pkgconfig_files= # GLOBAL VAR
2226
2227	my_glob_exclude="$1"
2228
2229	# Massage a value for pkgconfig_files from the value used in Makefile.am
2230	for my_filename in config/compile config/config.guess config/config.sub config/depcomp config/install-sh config/missing config/ltmain.sh; do
2231
2232	# ignore excluded filenames
2233	if test -n "$my_glob_exclude"; then
2234	my_cont=false
2235	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
2236	$my_cont && continue
2237	fi
2238
2239	# ignore duplicates
2240	case :$pkgconfig_files: in
2241	:$my_filename:) ;;
2242	*) pkgconfig_files="$pkgconfig_files:$my_filename" ;;
2243	esac
2244	done
2245
2246	# strip spurious leading `:'
2247	pkgconfig_files=`$ECHO "$pkgconfig_files" \| $SED 's,^:*,,'`
2248	}
2249
2250
2251	# func_install_pkgconfig_subproject
2252	# Unless --quiet was passed, display a message. Then copy pkgconfig_files
2253	# from libtool installation tree to subproject libltdl tree.
2254	func_install_pkgconfig_subproject ()
2255	{
2256	$opt_debug
2257
2258	# Remove any lingering files that my have been installed by some
2259	# previous libtoolize release:
2260	$opt_force && for file in $all_pkgconfig_files; do
2261	test -f "$subproject_auxdir/$file" && func_verbose "rm -f '$subproject_auxdir/$file'"
2262	rm -f "$subproject_auxdir/$file"
2263	done
2264
2265	# Copy all the files from installed libltdl to this project, if the
2266	# user specified an auxdir.
2267	$opt_quiet \|\| if test "x$ac_auxdir" = "x$subproject_auxdir"; then
2268	pkgconfig_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$subproject_auxdir'."
2269	elif test -n "$auxdir"; then
2270	pkgconfig_header="putting auxiliary files in \`$auxdir'."
2271	fi
2272
2273	func_copy_some_files "$pkgconfig_files" \
2274	"$pkgdatadir" "$ltdldir" pkgconfig_header
2275	}
2276
2277
2278	# func_install_pkgconfig_parent
2279	# Unless --quiet was passed, or AC_CONFIG_AUX_DIR was not seen, display a
2280	# message. Then update appropriate auxiliary files if newer ones are
2281	# available from the libtool installation tree.
2282	func_install_pkgconfig_parent ()
2283	{
2284	$opt_debug
2285
2286	# Remove any lingering files that my have been installed by some
2287	# previous libtoolize release:
2288	$opt_force && for file in $all_pkgconfig_files; do
2289	test -f "$auxdir/$file" && func_verbose "rm -f '$auxdir/$file'"
2290	rm -f "$auxdir/$file"
2291	done
2292
2293	if test -n "$ac_auxdir"; then
2294	pkgconfig_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$ac_auxdir'."
2295	elif test -n "$auxdir" \|\| test "x$ltdldir" = "x."; then
2296	pkgconfig_header="putting auxiliary files in \`$auxdir'."
2297	fi
2298
2299	if $opt_install; then
2300	func_config_update config.guess \
2301	"$pkgdatadir/config" "$auxdir" pkgconfig_header
2302	func_config_update config.sub \
2303	"$pkgdatadir/config" "$auxdir" pkgconfig_header
2304	func_install_update install-sh \
2305	"$pkgdatadir/config" "$auxdir" pkgconfig_header
2306	fi
2307	func_ltmain_update ltmain.sh \
2308	"$pkgdatadir/config" "$auxdir" pkgconfig_header
2309	}
2310
2311
2312	# func_install_pkgconfig_files
2313	# Install copies of the auxiliary files into this package according to
2314	# the whether libltdl is included as a subproject, and whether the parent
2315	# shares the AC_CONFIG_AUX_DIR setting.
2316	func_install_pkgconfig_files ()
2317	{
2318	$opt_debug
2319	func_massage_pkgconfig_files
2320
2321	# 1. Parent shares auxdir with subproject ltdl:
2322	if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" &&
2323	test "x$ac_auxdir" = "x$subproject_auxdir"
2324	then
2325	func_install_pkgconfig_subproject
2326
2327	# 2. Parent has separate auxdir to subproject ltdl:
2328	elif $opt_ltdl && test "x$ltdl_mode" = "xsubproject"
2329	# && test "x$auxdir" != "x$subproject_auxdir" is implied
2330	then
2331	if $seen_autoconf; then
2332	func_install_pkgconfig_parent
2333	fi
2334	func_install_pkgconfig_subproject
2335
2336	# 3. Not subproject, but AC_CONFIG_AUX_DIR was used in parent:
2337	elif test -n "$ac_auxdir" \|\| test "x$auxdir" = "x."; then
2338	func_install_pkgconfig_parent
2339
2340	# 4. AC_CONFIG_AUX_DIR was not specified:
2341	else
2342	func_verbose "AC_CONFIG_AUX_DIR not defined, not copying libtool auxiliary files."
2343	fi
2344	}
2345
2346
2347	# func_nonemptydir_p dirvar
2348	# DIRVAR is the name of a variable to evaluate. Unless DIRVAR names
2349	# a directory that exists and is non-empty abort with a diagnostic.
2350	func_nonemptydir_p ()
2351	{
2352	$opt_debug
2353	my_dirvar="$1"
2354	my_dir=`eval echo "\\\$$my_dirvar"`
2355
2356	# Is it a directory at all?
2357	test -d "$my_dir" \
2358	\|\| func_fatal_error "\$$my_dirvar is not a directory: \`$my_dir'"
2359
2360	# check that the directories contents can be ls'ed
2361	test -n "`{ cd $my_dir && ls; } 2>/dev/null`" \
2362	\|\| func_fatal_error "can not list files: \`$my_dir'"
2363	}
2364
2365
2366	# func_check_macros
2367	# Sanity check macros from aclocal.m4 against installed versions.
2368	func_check_macros ()
2369	{
2370	$opt_debug
2371	$opt_quiet && return
2372	$seen_autoconf \|\| return
2373
2374	ac_config_macro_dir_advised=false
2375
2376	if test -n "$ac_macrodir$ltdldir" && test -z "$macrodir"; then
2377	my_ac_config_macro_srcdir="$aclocaldir"
2378	if $opt_ltdl && test "$macrodir" != "$subproject_macrodir"; then
2379	my_ac_config_macro_srcdir="$subproject_macrodir"
2380	fi
2381
2382	my_needed="libtool.m4 ltoptions.m4 ltversion.m4 ltsugar.m4 lt~obsolete.m4"
2383	$opt_ltdl && my_needed="$my_needed argz.m4 ltdl.m4"
2384
2385	if test -f "aclocal.m4"; then
2386	for need in $my_needed; do
2387	func_aclocal_update_check $need
2388	$func_aclocal_update_check_result && my_missing="$my_missing $need"
2389	done
2390	else
2391	my_missing="$my_needed"
2392	fi
2393
2394	if test -n "$my_missing"; then
2395	func_echo "You should add the contents of the following files to \`aclocal.m4':"
2396	for need in $my_missing; do
2397	func_echo " \`$my_ac_config_macro_srcdir/$need'"
2398	done
2399
2400	if test "$my_ac_config_macro_srcdir" != "$aclocaldir"; then
2401	func_echo "or else add \`AC_CONFIG_MACRO_DIR([$subproject_macrodir])' to $configure_ac."
2402	ac_config_macro_dir_advised=:
2403	fi
2404	fi
2405	fi
2406
2407	## ---------------------------------------------------------- ##
2408	## Since we return early here when --no-warn was given: ##
2409	## DO NOT PUT ANYTHING BUT UPGRADE ADVICE MESSAGES BELOW HERE ##
2410	## ---------------------------------------------------------- ##
2411
2412	$opt_warning \|\| return
2413
2414	$seen_libtool \|\|
2415	func_echo "Remember to add \`LT_INIT' to $configure_ac."
2416
2417	# Suggest using LTDL_INIT if appropriate:
2418	$opt_ltdl && if test x$seen_ltdl != x:; then
2419	case $ltdl_mode in
2420	subproject) ltdl_init_args="" ;;
2421	*) ltdl_init_args="([$ltdl_mode])" ;;
2422	esac
2423	func_echo "Remember to add \`LTDL_INIT$ltdl_init_args' to $configure_ac."
2424	fi
2425
2426	if $opt_ltdl; then
2427	# Remind the user to call LT_CONFIG_LTDL_DIR:
2428	test -n "$ac_ltdldir" \|\|
2429	func_echo "Remember to add \`LT_CONFIG_LTDL_DIR([$ltdldir])' to \`$configure_ac'."
2430
2431	# For subproject mode, offer some suggestions for avoiding duplicate
2432	# files in a project that uses libltdl:
2433	if test "x$ltdl_mode" = "xsubproject"; then
2434	test "$subproject_auxdir" = "$auxdir" \|\|
2435	func_echo "Consider using \`AC_CONFIG_AUX_DIR([$subproject_auxdir])' in $configure_ac."
2436	$ac_config_macro_dir_advised \|\| test "$subproject_macrodir" = "$macrodir" \|\|
2437	func_echo "Consider using \`AC_CONFIG_MACRO_DIR([$subproject_macrodir])' in $configure_ac."
2438	ac_config_macro_dir_advised=:
2439	fi
2440	fi
2441
2442	# Suggest modern idioms for storing autoconf macros:
2443	$ac_config_macro_dir_advised \|\| if test -z "$ac_macrodir" \|\| test x"$macrodir" = x.; then
2444	func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([m4])' to $configure_ac and"
2445	func_echo "rerunning $progname, to keep the correct libtool macros in-tree."
2446	ac_config_macro_dir_advised=:
2447
2448	elif test -z "$ac_macrodir$ltdldir"; then
2449	func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([$macrodir])' to $configure_ac,"
2450	func_echo "and rerunning $progname and aclocal."
2451	ac_config_macro_dir_advised=:
2452	fi
2453
2454	if test -z "$am_macrodir$macrodir"; then
2455	func_echo "Consider adding \`-I m4' to ACLOCAL_AMFLAGS in Makefile.am."
2456
2457	elif test -z "$am_macrodir"; then
2458	if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" && test "$subproject_macrodir" != "$macrodir"; then
2459	func_echo "Consider adding \`-I $subproject_macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
2460	else
2461	func_echo "Consider adding \`-I $macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
2462	fi
2463	fi
2464
2465	# Don't trace for this, we're just checking the user didn't invoke it
2466	# directly from configure.ac.
2467	$SED 's,dnl .$,,; s,# .$,,' "$configure_ac" \| grep AC_PROG_RANLIB >/dev/null &&
2468	func_echo "\`AC_PROG_RANLIB' is rendered obsolete by \`LT_INIT'"
2469
2470	# FIXME: Ensure ltmain.sh, libtool.m4 and ltdl.m4 are from the same release
2471	}
2472
2473
2474	## ----------- ##
2475	## Main. ##
2476	## ----------- ##
2477
2478	{
2479	# Lists of all files libtoolize has ever installed. These are removed
2480	# before installing the latest files when --force was passed to help
2481	# ensure a clean upgrade.
2482	# Do not remove config.guess nor config.sub, we don't install them
2483	# without --install, and the project may not be using Automake.
2484	all_pkgconfig_files="ltmain.sh"
2485	all_pkgmacro_files="argz.m4 libtool.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.in ltversion.m4 lt~obsolete.m4"
2486	all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am README acinclude.m4 aclocal.m4 argz_.h argz.c config.h.in config-h.in configure configure.ac configure.in libltdl/lt__alloc.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h slist.c"
2487
2488	# Locations for important files:
2489	prefix=/opt/pspp
2490	datadir=/opt/pspp/share
2491	pkgdatadir=/opt/pspp/share/libtool
2492	pkgltdldir=/opt/pspp/share/libtool
2493	aclocaldir=/opt/pspp/share/aclocal
2494	auxdir=
2495	macrodir=
2496	configure_ac=configure.in
2497
2498	seen_autoconf=false
2499	seen_libtool=false
2500	seen_ltdl=false
2501
2502	# test EBCDIC or ASCII
2503	case `echo X\|tr X '\101'` in
2504	A) # ASCII based system
2505	# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
2506	SP2NL='tr \040 \012'
2507	NL2SP='tr \015\012 \040\040'
2508	;;
2509	*) # EBCDIC based system
2510	SP2NL='tr \100 \n'
2511	NL2SP='tr \r\n \100\100'
2512	;;
2513	esac
2514
2515	# Allow the user to override the master libtoolize repository:
2516	if test -n "$_lt_pkgdatadir"; then
2517	pkgltdldir="$_lt_pkgdatadir"
2518	pkgdatadir="$_lt_pkgdatadir/libltdl"
2519	aclocaldir="$_lt_pkgdatadir/libltdl/m4"
2520	fi
2521	func_nonemptydir_p pkgltdldir
2522	func_nonemptydir_p pkgdatadir
2523	func_nonemptydir_p aclocaldir
2524
2525	func_scan_files
2526
2527	case $ltdldir in
2528	.) ltdlprefix= ;;
2529	*) ltdlprefix=$ltdldir/ ;;
2530	esac
2531	subproject_auxdir=${ltdlprefix}config
2532	subproject_macrodir=${ltdlprefix}m4
2533
2534	# :::BE CAREFUL HERE:::
2535	# func_check_macros needs to check whether --ltdl was specified when
2536	# LTDL_INIT was not seen, so we can't just use one variable for both
2537	# conditions, or that check will be impossible. No need to clutter the
2538	# rest of the code with '$opt_ltdl \|\| $seen_ltdl' though, because we CAN
2539	# safely set opt_ltdl to true if LTDL_INIT was seen:
2540	$seen_ltdl && opt_ltdl=:
2541
2542	func_install_pkgconfig_files
2543	func_install_pkgmacro_files
2544	func_install_pkgltdl_files
2545
2546	func_check_macros
2547	}
2548
2549	exit $exit_status
2550
2551	# Local Variables:
2552	# mode:shell-script
2553	# sh-indentation:2
2554	# End:
2555

Download in other formats:

Original Format