Ticket #50244: macports.conf

# $Id: macports.conf.in 117120 2014-02-17 00:55:33Z jmr@macports.org $

# MacPorts system-wide configuration file.
# Commented-out values are defaults unless otherwise noted.

# Directory under which MacPorts should install ports. This must be
# where MacPorts itself is installed.
prefix                  /opt/mports

# User to run operations as when MacPorts drops privileges.
#macportsuser           macports

# Directory for MacPorts working data.
portdbpath              /opt/mports/var/macports

# Colon-delimited list of directories to search for external tools
# (make(1), pkg-config(1), etc.). While installing ports, MacPorts uses
# this list for PATH. Changing this setting is intended for advanced
# users only and is unsupported.
#binpath                /opt/mports/bin:/opt/mports/sbin:/bin:/sbin:/usr/bin:/usr/sbin

# Directory containing Xcode Tools. By default, MacPorts determines this
# using xcode-select(1).
#developer_dir          /Applications/Xcode.app/Contents/Developer

# Location of PackageMaker. Defaults to
# "${developer_dir}/Applications/Utilities/PackageMaker.app" with Xcode
# 4.2 and earlier and "/Applications/PackageMaker.app" with 4.3 and later.
#packagemaker_path      /Applications/PackageMaker.app

# Directory for application bundles installed by ports.
applications_dir        /Applications/MacPorts

# Directory for frameworks installed by ports.
frameworks_dir          /opt/mports/Library/Frameworks

# Location of the MacPorts sources list.
sources_conf            /opt/mports/etc/macports/sources.conf

# Location of the MacPorts global variants definition file. Optional.
variants_conf           /opt/mports/etc/macports/variants.conf

# When MacPorts should build ports from source.
# - ifneeded: Download binary archives if available; build from source
#   otherwise.
# - always: Always build from source; never try fetching archives.
# - never: Never build from source; try fetching archives and abort if
#   unavailable.
#buildfromsource        ifneeded

# Type of archive to use for port images. Supported types are cpgz,
# cpio, tar, tbz, tbz2, tgz, tlz, txz, xar, zip.
#portarchivetype        tbz2

# CPU architecture to target. Supported values are "ppc", "ppc64",
# "i386", and "x86_64". Defaults to:
# - OS X 10.5 and earlier: "ppc" on PowerPC, otherwise "i386".
# - OS X 10.6 and later: "x86_64" on Intel 64, otherwise "i386".
#build_arch             i386

# Space-delimited list of CPU architectures to target when building
# universal. Defaults to "i386 ppc" on OS X 10.5 and earlier and
# "x86_64 i386" on OS X 10.6 and later.
universal_archs         x86_64 i386

# Use ccache, a compiler cache for C, C++, Objective-C, and
# Objective-C++. (See http://ccache.samba.org.) The "ccache" executable
# must exist in one of the directories in binpath.
#configureccache        no

# Directory for ccache's cached compiler output.
#ccache_dir             /opt/mports/var/macports/build/.ccache

# Maximum size of files stored in ccache's cache. Append "G", "M", or
# "K" for gigabytes, megabytes, or kilobytes.
#ccache_size            2G

# Use distcc, a distributed compiler for C, C++, Objective-C, and
# Objective-C++. (See http://distcc.org.) The "distcc" executable must
# exist in one of the directories in binpath.
#configuredistcc        no

# Use pipes rather than temporary files for communication between the
# various stages of C, C++, Objective-C, and Objective-C++ compilation.
#configurepipe          yes

# Lowered scheduling priority to use for commands run during configure,
# build, and destroot. Accepted values are 0 (normal priority) through
# 20 (lowest priority).
#buildnicevalue         0

# Number of simultaneous make(1) jobs to use when building ports. If set
# to 0, the number of jobs will be the lesser of:
# - number of automatically-detected CPU cores
# - gigabytes of physical memory + 1
#buildmakejobs          0

# umask value to use when a port installs its files.
#destroot_umask         022

# Automatically execute "clean" after "install" of ports.
#portautoclean          yes

# Keep logs after successful installations.
#keeplogs               no

# The rsync server for fetching MacPorts base during selfupdate. This
# setting is NOT used when downloading the ports tree; the sources for
# the ports tree are set in sources.conf. See
# https://trac.macports.org/wiki/Mirrors#MacPortsSource for a list of
# available servers.
#rsync_server           rsync.macports.org

# Location of MacPorts base sources on rsync_server. If this references
# a .tar file, a signed .rmd160 file must exist in the same directory
# and will be used to verify its integrity. See
# https://trac.macports.org/wiki/Mirrors#MacPortsSource to find the
# correct rsync_dir for a particular rsync_server.
#rsync_dir              release/tarballs/base.tar

# Options to pass to rsync when fetching MacPorts base and the ports tree.
#rsync_options          -rtzv --delete-after

# Type of generated StartupItems.
# - launchd: Create StartupItems for use with launchd.
# - systemstarter: Create StartupItems for use with SystemStarter.
# - rcng: Create StartupItems for use with the rc.d system.
# - default: Create StartupItems for launchd on OS X and for rc.d on
#   other platforms.
# - none: Disable creation of StartupItems.
#startupitem_type       default

# Create system-level symlinks to generated StartupItems. If set to
# "no", symlinks will not be created; otherwise, symlinks will be placed
# in /Library/LaunchDaemons or /Library/LaunchAgents as appropriate.
#startupitem_install    yes

# Extra environment variables to keep. MacPorts sanitizes its
# environment while processing ports, keeping:
# - DISPLAY
# - DYLD_FALLBACK_FRAMEWORK_PATH, DYLD_FALLBACK_LIBRARY_PATH,
#   DYLD_FRAMEWORK_PATH, DYLD_INSERT_LIBRARIES, DYLD_LIBRARY_PATH
# - JAVA_HOME
# - ARCHIVE_SITE_LOCAL, MASTER_SITE_LOCAL, PATCH_SITE_LOCAL
# - PORTSRC
# - ALL_PROXY, FTP_PROXY, http_proxy, HTTPS_PROXY, NO_PROXY, RSYNC_PROXY
# - GROUP, USER
# - COLUMNS, LINES
# Variables listed in extra_env are added to this list. This has no
# default value; setting it is intended for advanced users and is
# unsupported. (Note that sudo(8) sanitizes its environment on OS X 10.5
# and later, so it may have to be configured to pass the desired
# variables to MacPorts.)
#extra_env              KEEP_THIS THIS_TOO

# Override proxy-related environment variables. By default, MacPorts
# takes proxy settings from the environment, from the proxy_* options
# below, and from Network Preferences, in that order. If this is set to
# "yes", MacPorts uses proxy_*, then Network Preferences, then the
# environment. (Note that Network Preferences does not have a setting
# for rsync proxies. Also note that sudo(8) sanitizes its environment on
# OS X 10.5 and later, so it may have to be configured to pass desired
# variables to MacPorts.)
#proxy_override_env     no

# Proxies. These have no default values. The analogous environment
# variables are "http_proxy", "HTTPS_PROXY", "FTP_PROXY", and
# "RSYNC_PROXY".
#proxy_http             proxy1:12345
#proxy_https            proxy2:67890
#proxy_ftp              proxy3:02139
#proxy_rsync            proxy4:11377

# Comma-delimited list of hosts that MacPorts should not access through
# the HTTP, HTTPS, and FTP proxies. This does not apply to rsync, and it
# has no default value.
#proxy_skip             host1, host2, host3

# Space-delimited lists of download hosts that MacPorts should not use
# and that MacPorts should prefer, respectively, overriding the usual
# ping time checks. These have no default values.
#host_blacklist         badhost1 badhost2
#preferred_hosts        preferredhost1 preferredhost2

# Whether MacPorts should automatically run rev-upgrade after upgrading
# ports.
#revupgrade_autorun     yes

# Whether rev-upgrade should automatically rebuild ports with broken
# linking or merely report the breakage. Supported values are "report"
# and "rebuild".
#revupgrade_mode        rebuild

# Space-delimited list of files and directories to delete after the
# unarchive stage and before creating a pkg. Paths are interpreted
# relative to prefix, and there is no default value. This is useful for
# removing unnecessary files and directories prior to pkg or mpkg
# deployment.
#pkg_post_unarchive_deletions   include share/doc share/man