Ticket #54710: main.log

version:1
:debug:main Executing org.macports.main (freecad)
:debug:main dropping privileges: euid changed to 502, egid changed to 501.
:debug:archivefetch archivefetch phase started at Thu Aug 31 18:29:06 EDT 2017
:debug:archivefetch Executing proc-pre-org.macports.archivefetch-archivefetch-0
:debug:archivefetch Active variants check for archivefetch-type install considers depends_lib depends_run: qt4-mac python27 boost xercesc3 zlib oce swig eigen3 freetype Coin-framework SoQt py27-matplotlib py27-shiboken py27-pyside py27-pyside-tools swig-python libgcc qt4-mac-sqlite3-plugin
:debug:archivefetch Executing org.macports.archivefetch (freecad)
version:1
:msg:archivefetch --->  Computing dependencies for freecad:info:archivefetch .:debug:archivefetch Searching for dependency: cmake
:debug:archivefetch Found Dependency: receipt exists for cmake
:debug:archivefetch Searching for dependency: pkgconfig
:debug:archivefetch Found Dependency: receipt exists for pkgconfig
:debug:archivefetch Searching for dependency: gcc6
:debug:archivefetch Found Dependency: receipt exists for gcc6
:debug:archivefetch Searching for dependency: qt4-mac
:debug:archivefetch Found Dependency: receipt exists for qt4-mac
:debug:archivefetch Searching for dependency: python27
:debug:archivefetch Found Dependency: receipt exists for python27
:debug:archivefetch Searching for dependency: boost
:debug:archivefetch Found Dependency: receipt exists for boost
:debug:archivefetch Searching for dependency: xercesc3
:debug:archivefetch Found Dependency: receipt exists for xercesc3
:debug:archivefetch Searching for dependency: zlib
:debug:archivefetch Found Dependency: receipt exists for zlib
:debug:archivefetch Searching for dependency: oce
:debug:archivefetch Found Dependency: receipt exists for oce
:debug:archivefetch Searching for dependency: swig
:debug:archivefetch Found Dependency: receipt exists for swig
:debug:archivefetch Searching for dependency: eigen3
:debug:archivefetch Found Dependency: receipt exists for eigen3
:debug:archivefetch Searching for dependency: freetype
:debug:archivefetch Found Dependency: receipt exists for freetype
:debug:archivefetch Searching for dependency: Coin-framework
:debug:archivefetch Found Dependency: receipt exists for Coin-framework
:debug:archivefetch Searching for dependency: SoQt
:debug:archivefetch Found Dependency: receipt exists for SoQt
:debug:archivefetch Searching for dependency: py27-matplotlib
:debug:archivefetch Found Dependency: receipt exists for py27-matplotlib
:debug:archivefetch Searching for dependency: py27-shiboken
:debug:archivefetch Found Dependency: receipt exists for py27-shiboken
:debug:archivefetch Searching for dependency: py27-pyside
:debug:archivefetch Found Dependency: receipt exists for py27-pyside
:debug:archivefetch Searching for dependency: py27-pyside-tools
:debug:archivefetch Found Dependency: receipt exists for py27-pyside-tools
:debug:archivefetch Searching for dependency: swig-python
:debug:archivefetch Found Dependency: receipt exists for swig-python
:debug:archivefetch Searching for dependency: libgcc
:debug:archivefetch Found Dependency: receipt exists for libgcc
:debug:archivefetch Searching for dependency: qt4-mac-sqlite3-plugin
:debug:archivefetch Found Dependency: receipt exists for qt4-mac-sqlite3-plugin
:debug:main Executing org.macports.main (freecad)
:debug:main dropping privileges: euid changed to 502, egid changed to 501.
:debug:fetch fetch phase started at Thu Aug 31 18:29:06 EDT 2017
:notice:fetch --->  Fetching distfiles for freecad
:debug:fetch Executing proc-pre-org.macports.fetch-fetch-0
:debug:fetch compilers.enforce_c list: 
:debug:fetch compilers.enforce_fortran list: 
:debug:fetch compilers.enforce_some_fortran list: 
:debug:fetch Executing org.macports.fetch (freecad)
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Thu Aug 31 18:29:06 EDT 2017
:notice:checksum --->  Verifying checksums for freecad
:debug:checksum Executing org.macports.checksum (freecad)
:info:checksum --->  Checksumming FreeCAD-0.16.tar.gz
:debug:checksum Calculated (rmd160) is 21974e87bfa6ea9b1a8ceb4a3cc3dbf1f74c685b
:debug:checksum Correct (rmd160) checksum for FreeCAD-0.16.tar.gz
:debug:checksum Calculated (sha256) is 6f4ac4b38a32086155506717885d239453131cc64b177b75616f44163276d343
:debug:checksum Correct (sha256) checksum for FreeCAD-0.16.tar.gz
:debug:checksum Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Thu Aug 31 18:29:07 EDT 2017
:notice:extract --->  Extracting freecad
:debug:extract Executing org.macports.extract (freecad)
:info:extract --->  Extracting FreeCAD-0.16.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/freecad/FreeCAD-0.16.tar.gz'
:debug:extract Environment: 
:debug:extract CC_PRINT_OPTIONS='YES'
:debug:extract CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/.CC_PRINT_OPTIONS'
:debug:extract CPATH='/opt/local/include'
:debug:extract LIBRARY_PATH='/opt/local/lib'
:debug:extract MACOSX_DEPLOYMENT_TARGET='10.9'
:info:extract Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/freecad/FreeCAD-0.16.tar.gz' | /usr/bin/tar -xf - 
:debug:extract system:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/freecad/FreeCAD-0.16.tar.gz' | /usr/bin/tar -xf - 
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work to macports
:debug:extract euid/egid changed to: 502/501
:debug:extract Executing proc-post-org.macports.extract-extract-0
:debug:extract Privilege de-escalation not attempted as not running as root.
:debug:patch patch phase started at Thu Aug 31 18:29:08 EDT 2017
:debug:patch Executing org.macports.patch (freecad)
:notice:patch --->  Applying patches to freecad
:info:patch --->  Applying cMake-FindCoin3D.cmake.diff
:debug:patch Environment: 
:debug:patch CC_PRINT_OPTIONS='YES'
:debug:patch CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/.CC_PRINT_OPTIONS'
:debug:patch CPATH='/opt/local/include'
:debug:patch LIBRARY_PATH='/opt/local/lib'
:debug:patch MACOSX_DEPLOYMENT_TARGET='10.9'
:info:patch Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/cad/freecad/files/cMake-FindCoin3D.cmake.diff'
:debug:patch system:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/cad/freecad/files/cMake-FindCoin3D.cmake.diff'
:info:patch patching file cMake/FindCoin3D.cmake
:info:patch --->  Applying src-App-FreeCADInit.py.diff
:debug:patch Environment: 
:debug:patch CC_PRINT_OPTIONS='YES'
:debug:patch CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/.CC_PRINT_OPTIONS'
:debug:patch CPATH='/opt/local/include'
:debug:patch LIBRARY_PATH='/opt/local/lib'
:debug:patch MACOSX_DEPLOYMENT_TARGET='10.9'
:info:patch Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/cad/freecad/files/src-App-FreeCADInit.py.diff'
:debug:patch system:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/cad/freecad/files/src-App-FreeCADInit.py.diff'
:info:patch patching file src/App/FreeCADInit.py
:info:patch Hunk #1 succeeded at 110 with fuzz 2 (offset 9 lines).
:debug:patch Executing proc-post-org.macports.patch-patch-0
:info:patch --->  Patching Assistant.cpp: s|QLibraryInfo::location.*|QLatin1String("/Applications/MacPorts/Qt4/");|
:debug:patch Executing reinplace: /usr/bin/sed {s|QLibraryInfo::location.*|QLatin1String("/Applications/MacPorts/Qt4/");|} </opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/Gui/Assistant.cpp >@file10
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/Gui/Assistant.cpp to macports
:debug:patch euid/egid changed to: 502/501
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/Gui/Assistant.cpp
:debug:patch euid/egid changed to: 502/501
:info:patch --->  Patching OpenSCADUtils.py: s|/Applications|/Applications/MacPorts|
:debug:patch Executing reinplace: /usr/bin/sed s|/Applications|/Applications/MacPorts| </opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/Mod/OpenSCAD/OpenSCADUtils.py >@file10
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/Mod/OpenSCAD/OpenSCADUtils.py to macports
:debug:patch euid/egid changed to: 502/501
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/Mod/OpenSCAD/OpenSCADUtils.py
:debug:patch euid/egid changed to: 502/501
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Thu Aug 31 18:29:08 EDT 2017
:notice:configure --->  Configuring freecad
:debug:configure Preferred compilers: clang macports-clang-3.9 macports-clang-3.8 macports-clang-3.7 macports-clang-3.4 macports-llvm-gcc-4.2 apple-gcc-4.2
:debug:configure Using compiler 'Xcode Clang'
:debug:configure Executing proc-pre-org.macports.configure-configure-0
:debug:configure Executing proc-pre-org.macports.configure-configure-1
:debug:configure Executing proc-pre-org.macports.configure-configure-2
:debug:configure Executing proc-pre-org.macports.configure-configure-3
:debug:configure Active variants check for source-type install considers depends_fetch depends_extract depends_lib depends_build depends_run: qt4-mac python27 boost xercesc3 zlib oce swig eigen3 freetype Coin-framework SoQt py27-matplotlib py27-shiboken py27-pyside py27-pyside-tools swig-python libgcc cmake pkgconfig gcc6 qt4-mac-sqlite3-plugin
:debug:configure Executing proc-pre-org.macports.configure-configure-4
:debug:configure Executing org.macports.configure (freecad)
:debug:configure Environment: 
:debug:configure CC='/usr/bin/clang'
:debug:configure CC_PRINT_OPTIONS='YES'
:debug:configure CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/.CC_PRINT_OPTIONS'
:debug:configure CFLAGS='-pipe -Os'
:debug:configure CPATH='/opt/local/include'
:debug:configure CPPFLAGS='-I/opt/local/include'
:debug:configure CXX='/usr/bin/clang++'
:debug:configure CXXFLAGS='-pipe -Os -stdlib=libc++'
:debug:configure F77FLAGS='-m64'
:debug:configure F90FLAGS='-pipe -Os -m64'
:debug:configure FC='/opt/local/bin/gfortran-mp-6'
:debug:configure FCFLAGS='-pipe -Os'
:debug:configure FFLAGS='-pipe -Os'
:debug:configure INSTALL='/usr/bin/install -c'
:debug:configure LDFLAGS='-L/opt/local/lib -Wl,-headerpad_max_install_names -L/opt/local/lib/gcc6/gcc/x86_64-apple-darwin13/6.4.0/../../..'
:debug:configure LIBRARY_PATH='/opt/local/lib'
:debug:configure MACOSX_DEPLOYMENT_TARGET='10.9'
:debug:configure MOC='/opt/local/libexec/qt4/bin/moc'
:debug:configure OBJC='/usr/bin/clang'
:debug:configure OBJCFLAGS='-pipe -Os'
:debug:configure OBJCXX='/usr/bin/clang++'
:debug:configure OBJCXXFLAGS='-pipe -Os -stdlib=libc++'
:debug:configure PATH='/opt/local/libexec/qt4/bin:/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin'
:debug:configure PKG_CONFIG_PATH='/opt/local/libexec/qt4/lib/pkgconfig'
:debug:configure QMAKE='/opt/local/libexec/qt4/bin/qmake'
:debug:configure QMAKESPEC='macx-g++'
:debug:configure QTDIR='/opt/local/libexec/qt4'
:info:configure Executing:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build" && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX='/opt/local' -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_C_COMPILER="$CC" -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_CXX_COMPILER="$CXX" -DCMAKE_FIND_FRAMEWORK=LAST -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_POLICY_DEFAULT_CMP0025=NEW -Wno-dev -DCMAKE_INSTALL_RPATH=/opt/local/libexec/freecad/lib -DCMAKE_INSTALL_NAME_DIR=/opt/local/libexec/freecad/lib -DCMAKE_INSTALL_PREFIX=/opt/local/libexec/freecad -DCMAKE_INSTALL_DATADIR=/opt/local/share/freecad -DCMAKE_INSTALL_DOCDIR=/opt/local/share/doc/freecad -DCMAKE_FRAMEWORK_PATH=/opt/local/Library/Frameworks -DPYSIDEUIC4BINARY=/opt/local/bin/pyside-uic-2.7 -DPYSIDERCC4BINARY=/opt/local/bin/pyside-rcc-2.7 -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_DEPLOYMENT_TARGET="10.9" -DCMAKE_OSX_SYSROOT="/" -DBUILD_ROBOT=NO -DPYTHON_LIBRARY=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python -DPYTHON_INCLUDE_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Headers -DPYTHON_EXECUTABLE=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 -DShiboken_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/cmake/Shiboken-1.2.2 -DPySide_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/cmake/PySide-1.2.2 -DOCE_DIR=/opt/local/Library/Frameworks/OCE.framework/Versions/0.15/Resources /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16 
:debug:configure system:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build" && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX='/opt/local' -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_C_COMPILER="$CC" -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_CXX_COMPILER="$CXX" -DCMAKE_FIND_FRAMEWORK=LAST -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_POLICY_DEFAULT_CMP0025=NEW -Wno-dev -DCMAKE_INSTALL_RPATH=/opt/local/libexec/freecad/lib -DCMAKE_INSTALL_NAME_DIR=/opt/local/libexec/freecad/lib -DCMAKE_INSTALL_PREFIX=/opt/local/libexec/freecad -DCMAKE_INSTALL_DATADIR=/opt/local/share/freecad -DCMAKE_INSTALL_DOCDIR=/opt/local/share/doc/freecad -DCMAKE_FRAMEWORK_PATH=/opt/local/Library/Frameworks -DPYSIDEUIC4BINARY=/opt/local/bin/pyside-uic-2.7 -DPYSIDERCC4BINARY=/opt/local/bin/pyside-rcc-2.7 -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_DEPLOYMENT_TARGET="10.9" -DCMAKE_OSX_SYSROOT="/" -DBUILD_ROBOT=NO -DPYTHON_LIBRARY=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python -DPYTHON_INCLUDE_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Headers -DPYTHON_EXECUTABLE=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 -DShiboken_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/cmake/Shiboken-1.2.2 -DPySide_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/cmake/PySide-1.2.2 -DOCE_DIR=/opt/local/Library/Frameworks/OCE.framework/Versions/0.15/Resources /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16 
:info:configure -- The C compiler identification is AppleClang 6.0.0.6000057
:info:configure -- The CXX compiler identification is AppleClang 6.0.0.6000057
:info:configure -- Check for working C compiler: /usr/bin/clang
:info:configure -- Check for working C compiler: /usr/bin/clang -- works
:info:configure -- Detecting C compiler ABI info
:info:configure -- Detecting C compiler ABI info - done
:info:configure -- Detecting C compile features
:info:configure -- Detecting C compile features - done
:info:configure -- Check for working CXX compiler: /usr/bin/clang++
:info:configure -- Check for working CXX compiler: /usr/bin/clang++ -- works
:info:configure -- Detecting CXX compiler ABI info
:info:configure -- Detecting CXX compiler ABI info - done
:info:configure -- Detecting CXX compile features
:info:configure -- Detecting CXX compile features - done
:info:configure -- Looking for GL/gl.h
:info:configure -- Looking for GL/gl.h - found
:info:configure -- Looking for C++ include istream
:info:configure -- Looking for C++ include istream - found
:info:configure -- Looking for C++ include ostream
:info:configure -- Looking for C++ include ostream - found
:info:configure -- Looking for C++ include fstream
:info:configure -- Looking for C++ include fstream - found
:info:configure -- Looking for C++ include sstream
:info:configure -- Looking for C++ include sstream - found
:info:configure -- Looking for C++ include ios
:info:configure -- Looking for C++ include ios - found
:info:configure -- Looking for C++ include iostream
:info:configure -- Looking for C++ include iostream - found
:info:configure -- Looking for C++ include iomanip
:info:configure -- Looking for C++ include iomanip - found
:info:configure -- Looking for C++ include iostream
:info:configure -- Looking for C++ include iostream - found
:info:configure -- Check for STD namespace
:info:configure -- Check for STD namespace - found
:info:configure -- prefix: /opt/local/libexec/freecad
:info:configure -- datadir: /opt/local/share/freecad
:info:configure -- docdir: /opt/local/share/doc/freecad
:info:configure -- includedir: include
:info:configure -- libdir: /opt/local/libexec/freecad/lib
:info:configure -- Detected MacPorts install at /opt/local
:info:configure -- Detected Homebrew install at /usr/local
:info:configure CMake Error at CMakeLists.txt:482 (message):
:info:configure   Multiple package management systems detected -
:info:configure CMake Error at CMakeLists.txt:484 (message):
:info:configure   define either MACPORTS_PREFIX or HOMEBREW_PREFIX
:info:configure -- Found PythonInterp: /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 (found version "2.7.13") 
:info:configure -- Found PythonLibs: /opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python (found suitable exact version "2.7.13") 
:info:configure -- Looking for pthread.h
:info:configure -- Looking for pthread.h - found
:info:configure -- Looking for pthread_create
:info:configure -- Looking for pthread_create - found
:info:configure -- Found Threads: TRUE  
:info:configure -- Boost version: 1.59.0
:info:configure -- Found the following Boost libraries:
:info:configure --   filesystem
:info:configure --   program_options
:info:configure --   regex
:info:configure --   signals
:info:configure --   system
:info:configure --   thread
:info:configure --   chrono
:info:configure --   date_time
:info:configure --   atomic
:info:configure -- Found Xerces-C: /opt/local/lib/libxerces-c.dylib
:info:configure -- Found ZLIB: /opt/local/lib/libz.dylib (found version "1.2.11") 
:info:configure -- PyCXX found:
:info:configure --   Headers:  /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src
:info:configure --   Sources:  /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16/src/CXX
:info:configure -- -- OpenCASCADE Community Edition has been found.
:info:configure -- Found OCC: /opt/local/include/oce (found version "6.8.0") 
:info:configure -- -- Found OCE/OpenCASCADE version: 6.8.0
:info:configure -- -- OCE/OpenCASCADE include directory: /opt/local/include/oce
:info:configure -- -- OCE/OpenCASCADE shared libraries directory: 
:info:configure -- Found SWIG: /opt/local/bin/swig (found version "3.0.12") 
:info:configure -- Found Eigen3: /opt/local/include/eigen3 (Required is at least version "2.91.0") 
:info:configure -- Looking for Q_WS_X11
:info:configure -- Looking for Q_WS_X11 - not found
:info:configure -- Looking for Q_WS_WIN
:info:configure -- Looking for Q_WS_WIN - not found
:info:configure -- Looking for Q_WS_QWS
:info:configure -- Looking for Q_WS_QWS - not found
:info:configure -- Looking for Q_WS_MAC
:info:configure -- Looking for Q_WS_MAC - found
:info:configure -- Looking for QT_MAC_USE_COCOA
:info:configure -- Looking for QT_MAC_USE_COCOA - found
:info:configure -- Found Qt4: /opt/local/libexec/qt4/bin/qmake (found suitable version "4.8.7", minimum required is "4.5.0") 
:info:configure -- Found Freetype: /opt/local/lib/libfreetype.dylib (found version "2.8.0") 
:info:configure -- Found OpenGL: //System/Library/Frameworks/OpenGL.framework  
:info:configure -- Found OpenGLU: //System/Library/Frameworks/OpenGL.framework
:info:configure -- Could NOT find Spnav (missing: SPNAV_LIBRARY SPNAV_INCLUDE_DIR) 
:info:configure -- libshiboken built for Release
:info:configure -- libshiboken built for Release
:info:configure -- Found PySide Tools: /opt/local/bin/pyside-uic-2.7, /opt/local/bin/pyside-rcc-2.7
:info:configure -- -- matplotlib-2.0.2 has been found.
:info:configure -- Platform is 64-bit, set -D_OCC64
:info:configure -- Build type: Release
:info:configure fatal: Not a git repository (or any of the parent directories): .git
:info:configure sh: bzr: command not found
:info:configure svn: E155007: '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16' is not a working copy
:info:configure Unknown version control
:info:configure /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Build/Version.h written
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/BaseClassPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/BoundBoxPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/PersistencePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/VectorPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/MatrixPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/RotationPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/PlacementPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/AxisPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/UnitPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Base/QuantityPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/App/DocumentPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/App/DocumentObjectPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/App/DocumentObjectGroupPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/App/ComplexGeoDataPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/App/PropertyContainerPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/App/MaterialPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Points/App/PointsPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Mesh/App/FacetPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Mesh/App/MeshFeaturePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Mesh/App/MeshPointPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Mesh/App/MeshPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ArcPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ArcOfCirclePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ArcOfParabolaPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/CirclePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ArcOfEllipsePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/EllipsePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/HyperbolaPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ArcOfHyperbolaPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ParabolaPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/OffsetCurvePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/GeometryPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/GeometryCurvePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/GeometrySurfacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/LinePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/PointPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/BezierCurvePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/BSplineCurvePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/PlanePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ConePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/CylinderPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/SpherePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/ToroidPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/BezierSurfacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/BSplineSurfacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/OffsetSurfacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/PlateSurfacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/PartFeaturePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/Part2DObjectPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeCompoundPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeCompSolidPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeEdgePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeFacePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeShellPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeSolidPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeVertexPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/TopoShapeWirePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Sketcher/App/SketchObjectSFPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Sketcher/App/SketchObjectPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Sketcher/App/ConstraintPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Sketcher/App/SketchPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Import/App/StepShapePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Fem/App/FemMeshPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Spreadsheet/App/SheetPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Spreadsheet/App/PropertySheetPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Path/App/CommandPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Path/App/PathPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Path/App/ToolPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Mod/Path/App/TooltablePy.cpp
:info:configure -- setting gcc options: -Wall -Werror -Wno-deprecated -pedantic-errors
:info:configure -- Boost version: 1.59.0
:info:configure -- Found the following Boost libraries:
:info:configure --   python
:info:configure -- found Boost: 1_59
:info:configure -- boost-incude dirs are: /opt/local/include
:info:configure -- boost-python lib is: /opt/local/lib/libboost_python-mt.dylib
:info:configure -- boost_LIBRARY_DIRS is: /opt/local/lib
:info:configure -- Boost_LIBRARIES is: /opt/local/lib/libboost_python-mt.dylib
:info:configure -- area module (for Path Workbench) will be installed to: /opt/local/libexec/freecad/lib
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/DocumentPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/PythonWorkbenchPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/ViewProviderPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/ViewProviderDocumentObjectPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/ViewProviderPythonFeaturePy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/WorkbenchPy.cpp
:info:configure -- /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/src/Gui/SelectionObjectPy.cpp
:info:configure -- Found Doxygen: /opt/local/bin/doxygen (found version "1.8.13") found components:  doxygen dot 
:info:configure =======================================
:info:configure Now run 'make' to build FreeCAD
:info:configure =======================================
:info:configure -- Configuring incomplete, errors occurred!
:info:configure See also "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/CMakeFiles/CMakeOutput.log".
:info:configure See also "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build/CMakeFiles/CMakeError.log".
:info:configure Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/build" && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX='/opt/local' -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_C_COMPILER="$CC" -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_CXX_COMPILER="$CXX" -DCMAKE_FIND_FRAMEWORK=LAST -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_POLICY_DEFAULT_CMP0025=NEW -Wno-dev -DCMAKE_INSTALL_RPATH=/opt/local/libexec/freecad/lib -DCMAKE_INSTALL_NAME_DIR=/opt/local/libexec/freecad/lib -DCMAKE_INSTALL_PREFIX=/opt/local/libexec/freecad -DCMAKE_INSTALL_DATADIR=/opt/local/share/freecad -DCMAKE_INSTALL_DOCDIR=/opt/local/share/doc/freecad -DCMAKE_FRAMEWORK_PATH=/opt/local/Library/Frameworks -DPYSIDEUIC4BINARY=/opt/local/bin/pyside-uic-2.7 -DPYSIDERCC4BINARY=/opt/local/bin/pyside-rcc-2.7 -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64" -DCMAKE_OSX_DEPLOYMENT_TARGET="10.9" -DCMAKE_OSX_SYSROOT="/" -DBUILD_ROBOT=NO -DPYTHON_LIBRARY=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python -DPYTHON_INCLUDE_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/Headers -DPYTHON_EXECUTABLE=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 -DShiboken_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/cmake/Shiboken-1.2.2 -DPySide_DIR=/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/cmake/PySide-1.2.2 -DOCE_DIR=/opt/local/Library/Frameworks/OCE.framework/Versions/0.15/Resources /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/FreeCAD-0.16 
:info:configure Exit code: 1
:error:configure Failed to configure freecad: configure failure: command execution failed
:debug:configure Error code: NONE
:debug:configure Backtrace: configure failure: command execution failed
:debug:configure     while executing
:debug:configure "$procedure $targetname"
:error:configure See /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/main.log for details.