dbus-glib is not building (0% CPU no error messages) when building Gimp2

[poubelle.beslin@…]

When building the Gimp 2 the building process stops with dbus-glib. No error messages are displayed and the CPU is 0% (iddle).

Configuration is iBook / G4 / 12" / 1.2GHz / 1.25 Gb / Tiger

Here is the output on the terminal "sudo port install gimp2 Password: ---> Fetching aalib ---> Attempting to fetch aalib-1.4rc5.tar.gz from ​ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for aalib ---> Extracting aalib ---> Applying patches to aalib ---> Configuring aalib ---> Building aalib with target all ---> Staging aalib into destroot ---> Installing aalib 1.4rc5_2 ---> Activating aalib 1.4rc5_2 ---> Cleaning aalib ---> Fetching curl ---> Attempting to fetch curl-7.17.1.tar.bz2 from ​http://curl.haxx.se/download/ ---> Verifying checksum(s) for curl ---> Extracting curl ---> Configuring curl ---> Building curl with target all ---> Staging curl into destroot ---> Installing curl 7.17.1_0+darwin_8 ---> Activating curl 7.17.1_0+darwin_8 ---> Cleaning curl ---> Fetching libart_lgpl ---> Attempting to fetch libart_lgpl-2.3.19.tar.bz2 from ​http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/libart_lgpl/2.3/ ---> Verifying checksum(s) for libart_lgpl ---> Extracting libart_lgpl ---> Applying patches to libart_lgpl ---> Configuring libart_lgpl ---> Building libart_lgpl with target all ---> Staging libart_lgpl into destroot ---> Installing libart_lgpl 2.3.19_2 ---> Activating libart_lgpl 2.3.19_2 ---> Cleaning libart_lgpl ---> Fetching libexif ---> Attempting to fetch libexif-0.6.16.tar.bz2 from ​http://downloads.sourceforge.net/libexif ---> Verifying checksum(s) for libexif ---> Extracting libexif ---> Configuring libexif ---> Building libexif with target all ^{[[A---> Staging libexif into destroot ---> Installing libexif 0.6.16_1 ---> Activating libexif 0.6.16_1 ---> Cleaning libexif ---> Fetching libgpg-error ---> Attempting to fetch libgpg-error-1.6.tar.bz2 from ​http://ftp.gnupg.org/gcrypt/libgpg-error ---> Verifying checksum(s) for libgpg-error ---> Extracting libgpg-error ---> Configuring libgpg-error ---> Building libgpg-error with target all ---> Staging libgpg-error into destroot ---> Installing libgpg-error 1.6_0 ---> Activating libgpg-error 1.6_0 ---> Cleaning libgpg-error ---> Fetching libgcrypt ---> Attempting to fetch libgcrypt-1.2.4.tar.bz2 from ​http://ftp.gnupg.org/gcrypt/libgcrypt ---> Verifying checksum(s) for libgcrypt ---> Extracting libgcrypt ---> Configuring libgcrypt ---> Building libgcrypt with target all ---> Staging libgcrypt into destroot ---> Installing libgcrypt 1.2.4_1+darwin_8 ---> Activating libgcrypt 1.2.4_1+darwin_8 ---> Cleaning libgcrypt ---> Fetching perl5.8 ---> Attempting to fetch perl-5.8.8.tar.bz2 from ​http://www.cpan.org/src/5.0/ ---> Verifying checksum(s) for perl5.8 ---> Extracting perl5.8 ---> Applying patches to perl5.8 ---> Configuring perl5.8 ---> Building perl5.8 with target all ---> Staging perl5.8 into destroot ---> Installing perl5.8 5.8.8_0+darwin_8 ---> Activating perl5.8 5.8.8_0+darwin_8 ---> Cleaning perl5.8 ---> Fetching p5-xml-parser ---> Attempting to fetch XML-Parser-2.35.tar.gz from ​http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/XML ---> Verifying checksum(s) for p5-xml-parser ---> Extracting p5-xml-parser ---> Configuring p5-xml-parser ---> Building p5-xml-parser with target all ---> Staging p5-xml-parser into destroot ---> Installing p5-xml-parser 2.35_0 ---> Activating p5-xml-parser 2.35_0 ---> Cleaning p5-xml-parser ---> Fetching gnome-keyring ---> Attempting to fetch gnome-keyring-2.20.1.tar.bz2 from ​http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/gnome-keyring/2.20/ ---> Verifying checksum(s) for gnome-keyring ---> Extracting gnome-keyring ---> Configuring gnome-keyring ---> Building gnome-keyring with target all ---> Staging gnome-keyring into destroot ---> Installing gnome-keyring 2.20.1_0 ---> Activating gnome-keyring 2.20.1_0 ---> Cleaning gnome-keyring ---> Fetching xmlcatmgr ---> Attempting to fetch xmlcatmgr-2.2.tar.gz from ​ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for xmlcatmgr ---> Extracting xmlcatmgr ---> Configuring xmlcatmgr ---> Building xmlcatmgr with target all ---> Staging xmlcatmgr into destroot ---> Installing xmlcatmgr 2.2_1 ---> Activating xmlcatmgr 2.2_1 ---> Cleaning xmlcatmgr ---> Fetching docbook-xml-4.1.2 ---> Attempting to fetch docbkx412.zip from ​http://www.oasis-open.org/docbook/xml/4.1.2/ ---> Verifying checksum(s) for docbook-xml-4.1.2 ---> Extracting docbook-xml-4.1.2 ---> Configuring docbook-xml-4.1.2 ---> Building docbook-xml-4.1.2 with target all ---> Staging docbook-xml-4.1.2 into destroot ---> Installing docbook-xml-4.1.2 4.1.2_1 ---> Activating docbook-xml-4.1.2 4.1.2_1 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.1.2/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.1.2 ---> Fetching libxml2 ---> Attempting to fetch libxml2-2.6.30.tar.gz from ​http://xmlsoft.org/sources/ ---> Verifying checksum(s) for libxml2 ---> Extracting libxml2 ---> Configuring libxml2 ---> Building libxml2 with target all ---> Staging libxml2 into destroot ---> Installing libxml2 2.6.30_0 ---> Activating libxml2 2.6.30_0 ---> Cleaning libxml2 ---> Fetching docbook-xml-4.2 ---> Attempting to fetch docbook-xml-4.2.zip from ​http://www.oasis-open.org/docbook/xml/4.2/ ---> Verifying checksum(s) for docbook-xml-4.2 ---> Extracting docbook-xml-4.2 ---> Configuring docbook-xml-4.2 ---> Building docbook-xml-4.2 with target all ---> Staging docbook-xml-4.2 into destroot ---> Installing docbook-xml-4.2 4.2_0 ---> Activating docbook-xml-4.2 4.2_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xml/docbook/4.2/catalog.xml". ###################################################################### ---> Cleaning docbook-xml-4.2 ---> Fetching docbook-xsl ---> Attempting to fetch docbook-xsl-1.72.0.tar.bz2 from ​http://downloads.sourceforge.net/docbook ---> Verifying checksum(s) for docbook-xsl ---> Extracting docbook-xsl ---> Configuring docbook-xsl ---> Building docbook-xsl with target all ---> Staging docbook-xsl into destroot ---> Installing docbook-xsl 1.72.0_0 ---> Activating docbook-xsl 1.72.0_0 ###################################################################### # As MacPorts does not currently have a post-deactivate hook, # you will need to ensure that you manually remove the catalog # entry for this port when you uninstall it. To do so, run # "xmlcatmgr remove nextCatalog /opt/local/share/xsl/docbook-xsl/catalog.xml". ###################################################################### ---> Cleaning docbook-xsl ---> Fetching getopt ---> Attempting to fetch getopt-1.1.4.tar.gz from ​http://software.frodo.looijaard.name/getopt/files/ ---> Verifying checksum(s) for getopt ---> Extracting getopt ---> Applying patches to getopt ---> Configuring getopt ---> Building getopt with target all ---> Staging getopt into destroot ---> Installing getopt 1.1.4_1 ---> Activating getopt 1.1.4_1 ---> Cleaning getopt ---> Fetching libxslt ---> Attempting to fetch libxslt-1.1.22.tar.gz from ​ftp://xmlsoft.org/libxslt/ ---> Verifying checksum(s) for libxslt ---> Extracting libxslt ---> Configuring libxslt ---> Building libxslt with target all ---> Staging libxslt into destroot ---> Installing libxslt 1.1.22_0 ---> Activating libxslt 1.1.22_0 ---> Cleaning libxslt ---> Fetching xmlto ---> Attempting to fetch xmlto-0.0.18.tar.bz2 from ​http://cyberelk.net/tim/data/xmlto/stable/ ---> Verifying checksum(s) for xmlto ---> Extracting xmlto ---> Configuring xmlto ---> Building xmlto with target all ---> Staging xmlto into destroot ---> Installing xmlto 0.0.18_3 ---> Activating xmlto 0.0.18_3 ---> Cleaning xmlto ---> Fetching dbus ---> Attempting to fetch dbus-1.0.2.tar.gz from ​http://dbus.freedesktop.org/releases/dbus ---> Verifying checksum(s) for dbus ---> Extracting dbus ---> Configuring dbus ---> Building dbus with target all ---> Staging dbus into destroot ---> Creating launchd control script ########################################################### # A startup item has been generated that will aid in # starting dbus with launchd. It is disabled # by default. Execute the following command to start it, # and to cause it to launch at startup: # # sudo launchctl load -w /Library/LaunchDaemons/org.macports.dbus.plist ########################################################### ---> Installing dbus 1.0.2_2 ---> Activating dbus 1.0.2_2 ---> Cleaning dbus ---> Fetching dbus-glib ---> Attempting to fetch dbus-glib-0.74.tar.gz from ​http://dbus.freedesktop.org/releases/dbus-glib ---> Verifying checksum(s) for dbus-glib ---> Extracting dbus-glib ---> Configuring dbus-glib ---> Building dbus-glib with target all"}

[rwoodsmall@…]

debug log of dbus-glib build.