Opened 15 years ago

Last modified 14 years ago

#21357 closed defect

dsniff-devel 2.4b1_2 fails to build under Leopard — at Initial Version

Reported by: sck-nogas (Scott C. Kennedy) Owned by: macports-tickets@…
Priority: Normal Milestone:
Component: ports Version: 1.8.0
Keywords: Cc:
Port: dsniff-devel

Description

On my 10.5 system, I run a port upgrade for dsniff-devel and get the error shown in debug mode below. I have already tried un-installing libnet11 and installing libnet previously....

Biko-2:distfiles sck$ sudo port -duR upgrade dsniff-devel DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dsniff-devel 2.4b1_2 exists in the ports tree DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is the latest installed DEBUG: dsniff-devel 2.4b1_1 +darwin_9 is active DEBUG: Merging existing variants darwin_9 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port dsniff-devel. DEBUG: Requested variant i386 is not provided by port dsniff-devel. DEBUG: Requested variant macosx is not provided by port dsniff-devel. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libnids 1.23_2 exists in the ports tree DEBUG: libnids 1.23_2 is the latest installed DEBUG: libnids 1.23_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libnids. DEBUG: Requested variant i386 is not provided by port libnids. DEBUG: Requested variant macosx is not provided by port libnids. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpcap 1.0.0_0 exists in the ports tree DEBUG: libpcap 1.0.0_0 is the latest installed DEBUG: libpcap 1.0.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libpcap. DEBUG: Requested variant i386 is not provided by port libpcap. DEBUG: Requested variant macosx is not provided by port libpcap. DEBUG: No need to upgrade! libpcap 1.0.0_0 >= libpcap 1.0.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libnet11 1.1.4_0 exists in the ports tree DEBUG: libnet11 1.1.4_0 is the latest installed DEBUG: libnet11 1.1.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libnet11. DEBUG: Requested variant i386 is not provided by port libnet11. DEBUG: Requested variant macosx is not provided by port libnet11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.64_2 exists in the ports tree DEBUG: autoconf 2.64_2 is the latest installed DEBUG: autoconf 2.64_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.36.4_1 exists in the ports tree DEBUG: help2man 1.36.4_1 is the latest installed DEBUG: help2man 1.36.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree DEBUG: p5-locale-gettext 1.05_0 is the latest installed DEBUG: p5-locale-gettext 1.05_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 is the latest installed DEBUG: libiconv 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11_0 exists in the ports tree DEBUG: automake 1.11_0 is the latest installed DEBUG: automake 1.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6a_0 exists in the ports tree DEBUG: libtool 2.2.6a_0 is the latest installed DEBUG: libtool 2.2.6a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0 DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0 DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2 DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel/work ---> Computing dependencies for dsniff-devel DEBUG: Searching for dependency: libpcap DEBUG: Found Dependency: receipt exists for libpcap DEBUG: Searching for dependency: libnids DEBUG: Found Dependency: receipt exists for libnids DEBUG: Executing org.macports.main (dsniff-devel) DEBUG: Skipping completed org.macports.fetch (dsniff-devel) DEBUG: Skipping completed org.macports.checksum (dsniff-devel) DEBUG: Skipping completed org.macports.extract (dsniff-devel) DEBUG: Skipping completed org.macports.patch (dsniff-devel) DEBUG: Skipping completed org.macports.configure (dsniff-devel) ---> Building dsniff-devel DEBUG: Executing org.macports.build (dsniff-devel) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2 all' /usr/bin/gcc-4.0 -L/opt/local/lib -o arpspoof arpspoof.o arp.o -lresolv -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet /usr/bin/gcc-4.0 -L/opt/local/lib -o dnsspoof dnsspoof.o pcaputil.o -lresolv -L. -lmissing -L/opt/local/lib -lpcap -L/opt/local/lib -lnet Undefined symbols:

"_libnet_open_link_interface", referenced from:

_main in arpspoof.o

"_libnet_write_link_layer", referenced from:

_arp_send in arpspoof.o

"_libnet_host_lookup", referenced from:

_arp_send in arpspoof.o _arp_send in arpspoof.o _arp_send in arpspoof.o _main in arpspoof.o

"_libnet_name_resolve", referenced from:

_main in arpspoof.o _main in arpspoof.o

"_libnet_get_ipaddr", referenced from:

_arp_send in arpspoof.o

ld: symbol(s) not found collect2: ld returned 1 exit status Undefined symbols:

"_libnet_build_ip", referenced from:

_dns_spoof in dnsspoof.o

"_libnet_write_ip", referenced from:

_dns_spoof in dnsspoof.o

"_libnet_close_raw_sock", referenced from:

_cleanup in dnsspoof.o

"_libnet_open_raw_sock", referenced from:

_main in dnsspoof.o

"_libnet_open_link_interface", referenced from:

_main in dnsspoof.o

"_libnet_close_link_interface", referenced from:

_main in dnsspoof.o

"_libnet_host_lookup", referenced from:

_main in dnsspoof.o _dns_spoof in dnsspoof.o _dns_spoof in dnsspoof.o

"_libnet_get_ipaddr", referenced from:

_main in dnsspoof.o

ld: symbol(s) not found collect2: ld returned 1 exit status make: * [arpspoof] Error 1 make: * Waiting for unfinished jobs.... make: * [dnsspoof] Error 1 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2 all " returned error 2 Command output: _main in arpspoof.o

_main in arpspoof.o

"_libnet_get_ipaddr", referenced from:

_arp_send in arpspoof.o

ld: symbol(s) not found collect2: ld returned 1 exit status Undefined symbols:

"_libnet_build_ip", referenced from:

_dns_spoof in dnsspoof.o

"_libnet_write_ip", referenced from:

_dns_spoof in dnsspoof.o

"_libnet_close_raw_sock", referenced from:

_cleanup in dnsspoof.o

"_libnet_open_raw_sock", referenced from:

_main in dnsspoof.o

"_libnet_open_link_interface", referenced from:

_main in dnsspoof.o

"_libnet_close_link_interface", referenced from:

_main in dnsspoof.o

"_libnet_host_lookup", referenced from:

_main in dnsspoof.o _dns_spoof in dnsspoof.o _dns_spoof in dnsspoof.o

"_libnet_get_ipaddr", referenced from:

_main in dnsspoof.o

ld: symbol(s) not found collect2: ld returned 1 exit status make: * [arpspoof] Error 1 make: * Waiting for unfinished jobs.... make: * [dnsspoof] Error 1

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j2 all " returned error 2 Command output: _main in arpspoof.o

_main in arpspoof.o

"_libnet_get_ipaddr", referenced from:

_arp_send in arpspoof.o

ld: symbol(s) not found collect2: ld returned 1 exit status Undefined symbols:

"_libnet_build_ip", referenced from:

_dns_spoof in dnsspoof.o

"_libnet_write_ip", referenced from:

_dns_spoof in dnsspoof.o

"_libnet_close_raw_sock", referenced from:

_cleanup in dnsspoof.o

"_libnet_open_raw_sock", referenced from:

_main in dnsspoof.o

"_libnet_open_link_interface", referenced from:

_main in dnsspoof.o

"_libnet_close_link_interface", referenced from:

_main in dnsspoof.o

"_libnet_host_lookup", referenced from:

_main in dnsspoof.o _dns_spoof in dnsspoof.o _dns_spoof in dnsspoof.o

"_libnet_get_ipaddr", referenced from:

_main in dnsspoof.o

ld: symbol(s) not found collect2: ld returned 1 exit status make: * [arpspoof] Error 1 make: * Waiting for unfinished jobs.... make: * [dnsspoof] Error 1

while executing

"command_exec build"

(procedure "portbuild::build_main" line 9) invoked from within

"$procedure $targetname" Warning: the following items did not execute (for dsniff-devel): org.macports.destroot org.macports.build DEBUG: couldn't read file "/opt/local/share/macports/Tcl/darwintrace1.0/pkgIndex.tcl": no such file or directory

while executing

"source [file join $dir pkgIndex.tcl]" Error: Unable to upgrade port: 1

Change History (0)

Note: See TracTickets for help on using tickets.