install kde fails at xorg-libXxf86vm

[thedoobs@…]

Installing kde on a new install of macports fails at xorg-libXxf86vm. Here is the debug output from "sudo port -d install kde":

DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kde
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kde
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kde.
DEBUG: Requested variant i386 is not provided by port kde.
DEBUG: Requested variant macosx is not provided by port kde.
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kde/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kde/work
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: kdelibs3 3.5.10_2 exists in the ports tree
DEBUG: kdelibs3 3.5.10_2  is the latest installed
DEBUG: kdelibs3 3.5.10_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kdelibs3.
DEBUG: Requested variant i386 is not provided by port kdelibs3.
DEBUG: Requested variant macosx is not provided by port kdelibs3.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf263
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf263 2.63_0 exists in the ports tree
DEBUG: autoconf263 2.63_0  is the latest installed
DEBUG: autoconf263 2.63_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf263
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf263.
DEBUG: Requested variant i386 is not provided by port autoconf263.
DEBUG: Requested variant macosx is not provided by port autoconf263.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.36.4_1 exists in the ports tree
DEBUG: help2man 1.36.4_1  is the latest installed
DEBUG: help2man 1.36.4_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_0  is the latest installed
DEBUG: p5-locale-gettext 1.05_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
DEBUG: No need to upgrade! autoconf263 2.63_0 >= autoconf263 2.63_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1  is the latest installed
DEBUG: pkgconfig 0.23_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/unsermake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: unsermake 0.4-20070824_2 exists in the ports tree
DEBUG: unsermake 0.4-20070824_2  is the latest installed
DEBUG: unsermake 0.4-20070824_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/unsermake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port unsermake.
DEBUG: Requested variant i386 is not provided by port unsermake.
DEBUG: Requested variant macosx is not provided by port unsermake.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python26 2.6.2_6 exists in the ports tree
DEBUG: python26 2.6.2_6 +darwin is the latest installed
DEBUG: python26 2.6.2_6 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python26.
DEBUG: Requested variant macosx is not provided by port python26.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.64_2 exists in the ports tree
DEBUG: autoconf 2.64_2  is the latest installed
DEBUG: autoconf 2.64_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11_0 exists in the ports tree
DEBUG: automake 1.11_0  is the latest installed
DEBUG: automake 1.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6a_0 exists in the ports tree
DEBUG: libtool 2.2.6a_0  is the latest installed
DEBUG: libtool 2.2.6a_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3  is the latest installed
DEBUG: zlib 1.2.3_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8k_0 exists in the ports tree
DEBUG: openssl 0.9.8k_0 +darwin is the latest installed
DEBUG: openssl 0.9.8k_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.6_1 exists in the ports tree
DEBUG: tk 8.5.6_1 +darwin is the latest installed
DEBUG: tk 8.5.6_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tk.
DEBUG: Requested variant macosx is not provided by port tk.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.6_0 exists in the ports tree
DEBUG: tcl 8.5.6_0 +darwin is the latest installed
DEBUG: tcl 8.5.6_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tcl.
DEBUG: Requested variant macosx is not provided by port tcl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! tcl 8.5.6_0 >= tcl 8.5.6_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.13_2 exists in the ports tree
DEBUG: Xft2 2.1.13_2  is the latest installed
DEBUG: Xft2 2.1.13_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port Xft2.
DEBUG: Requested variant i386 is not provided by port Xft2.
DEBUG: Requested variant macosx is not provided by port Xft2.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0  is the latest installed
DEBUG: xorg-xproto 7.0.16_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0  is the latest installed
DEBUG: xrender 0.9.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant i386 is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0  is the latest installed
DEBUG: xorg-renderproto 0.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3_0  is the latest installed
DEBUG: xorg-libX11 1.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.3.0_0  is the latest installed
DEBUG: xorg-util-macros 1.3.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros 1.3.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.4_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.4_0  is the latest installed
DEBUG: xorg-xtrans 1.2.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.4_0 >= xorg-xtrans 1.2.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
DEBUG: xorg-xextproto 7.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0  is the latest installed
DEBUG: xorg-inputproto 2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.3_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.3_0  is the latest installed
DEBUG: xorg-kbproto 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.3_0 >= xorg-kbproto 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0  is the latest installed
DEBUG: xorg-libXau 1.0.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: No need to upgrade! xorg-libX11 1.3_0 >= xorg-libX11 1.3_0
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.9_1 exists in the ports tree
DEBUG: freetype 2.3.9_1 +macosx is the latest installed
DEBUG: freetype 2.3.9_1 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.9_1 >= freetype 2.3.9_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.7.3_0 exists in the ports tree
DEBUG: fontconfig 2.7.3_0 +macosx is the latest installed
DEBUG: fontconfig 2.7.3_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Requested variant i386 is not provided by port fontconfig.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! fontconfig 2.7.3_0 >= fontconfig 2.7.3_0
DEBUG: No need to upgrade! Xft2 2.1.13_2 >= Xft2 2.1.13_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1_0  is the latest installed
DEBUG: xorg-libXext 1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: No need to upgrade! xorg-libXext 1.1_0 >= xorg-libXext 1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
DEBUG: No need to upgrade! tk 8.5.6_1 >= tk 8.5.6_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.18_0 exists in the ports tree
DEBUG: sqlite3 3.6.18_0  is the latest installed
DEBUG: sqlite3 3.6.18_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant i386 is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.0.000_2 exists in the ports tree
DEBUG: readline 6.0.000_2 +darwin is the latest installed
DEBUG: readline 6.0.000_2 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
DEBUG: No need to upgrade! sqlite3 3.6.18_0 >= sqlite3 3.6.18_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_5 exists in the ports tree
DEBUG: db46 4.6.21_5  is the latest installed
DEBUG: db46 4.6.21_5  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port db46.
DEBUG: Requested variant i386 is not provided by port db46.
DEBUG: Requested variant macosx is not provided by port db46.
DEBUG: No need to upgrade! db46 4.6.21_5 >= db46 4.6.21_5
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.8.3_1 exists in the ports tree
DEBUG: gdbm 1.8.3_1  is the latest installed
DEBUG: gdbm 1.8.3_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gdbm.
DEBUG: Requested variant i386 is not provided by port gdbm.
DEBUG: Requested variant macosx is not provided by port gdbm.
DEBUG: No need to upgrade! gdbm 1.8.3_1 >= gdbm 1.8.3_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
DEBUG: No need to upgrade! python26 2.6.2_6 >= python26 2.6.2_6
DEBUG: No need to upgrade! unsermake 0.4-20070824_2 >= unsermake 0.4-20070824_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/poll-emulator
DEBUG: poll-emulator is *not* installed by MacPorts
DEBUG: Searching for dependency: poll-emulator
DEBUG: Didn't find receipt, going to depspec regex for: poll-emulator
DEBUG: Found Dependency: path: /usr/lib filename: libpoll.dylib regex: ^libpoll\.dylib$
DEBUG: poll-emulator not installed, soft dependency satisfied
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: mesa 7.6_0 exists in the ports tree
DEBUG: mesa 7.6_0 +hw_render is the latest installed
DEBUG: mesa 7.6_0 +hw_render is active
DEBUG: Merging existing variants hw_render into variants
DEBUG: new fully merged portvariants: hw_render +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port mesa.
DEBUG: Requested variant i386 is not provided by port mesa.
DEBUG: Requested variant macosx is not provided by port mesa.
DEBUG: Executing variant hw_render provides hw_render
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: makedepend 1.0.1_0 exists in the ports tree
DEBUG: makedepend 1.0.1_0  is the latest installed
DEBUG: makedepend 1.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port makedepend.
DEBUG: Requested variant i386 is not provided by port makedepend.
DEBUG: Requested variant macosx is not provided by port makedepend.
DEBUG: No need to upgrade! makedepend 1.0.1_0 >= makedepend 1.0.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glut 3.7_3 exists in the ports tree
DEBUG: glut 3.7_3  is the latest installed
DEBUG: glut 3.7_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port glut.
DEBUG: Requested variant i386 is not provided by port glut.
DEBUG: Requested variant macosx is not provided by port glut.
DEBUG: No need to upgrade! glut 3.7_3 >= glut 3.7_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-glproto 1.4.10_0 exists in the ports tree
DEBUG: xorg-glproto 1.4.10_0  is the latest installed
DEBUG: xorg-glproto 1.4.10_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-glproto.
DEBUG: Requested variant i386 is not provided by port xorg-glproto.
DEBUG: Requested variant macosx is not provided by port xorg-glproto.
DEBUG: No need to upgrade! xorg-glproto 1.4.10_0 >= xorg-glproto 1.4.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-dri2proto 2.1_0 exists in the ports tree
DEBUG: xorg-dri2proto 2.1_0  is the latest installed
DEBUG: xorg-dri2proto 2.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-dri2proto.
DEBUG: Requested variant i386 is not provided by port xorg-dri2proto.
DEBUG: Requested variant macosx is not provided by port xorg-dri2proto.
DEBUG: No need to upgrade! xorg-dri2proto 2.1_0 >= xorg-dri2proto 2.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXfixes 4.0.3_1 exists in the ports tree
DEBUG: xorg-libXfixes 4.0.3_1  is the latest installed
DEBUG: xorg-libXfixes 4.0.3_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXfixes.
DEBUG: Requested variant i386 is not provided by port xorg-libXfixes.
DEBUG: Requested variant macosx is not provided by port xorg-libXfixes.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-fixesproto 4.1_0 exists in the ports tree
DEBUG: xorg-fixesproto 4.1_0  is the latest installed
DEBUG: xorg-fixesproto 4.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-fixesproto.
DEBUG: Requested variant i386 is not provided by port xorg-fixesproto.
DEBUG: Requested variant macosx is not provided by port xorg-fixesproto.
DEBUG: No need to upgrade! xorg-fixesproto 4.1_0 >= xorg-fixesproto 4.1_0
DEBUG: No need to upgrade! xorg-libXfixes 4.0.3_1 >= xorg-libXfixes 4.0.3_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXi 1.3_0 exists in the ports tree
DEBUG: xorg-libXi 1.3_0  is the latest installed
DEBUG: xorg-libXi 1.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXi.
DEBUG: Requested variant i386 is not provided by port xorg-libXi.
DEBUG: Requested variant macosx is not provided by port xorg-libXi.
DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
DEBUG: xorg-libXmu 1.0.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXt 1.0.6_0 exists in the ports tree
DEBUG: xorg-libXt 1.0.6_0  is the latest installed
DEBUG: xorg-libXt 1.0.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXt.
DEBUG: Requested variant i386 is not provided by port xorg-libXt.
DEBUG: Requested variant macosx is not provided by port xorg-libXt.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
DEBUG: xorg-libsm 1.1.1_0  is the latest installed
DEBUG: xorg-libsm 1.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libsm.
DEBUG: Requested variant i386 is not provided by port xorg-libsm.
DEBUG: Requested variant macosx is not provided by port xorg-libsm.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
DEBUG: xorg-libice 1.0.6_0  is the latest installed
DEBUG: xorg-libice 1.0.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libice.
DEBUG: Requested variant i386 is not provided by port xorg-libice.
DEBUG: Requested variant macosx is not provided by port xorg-libice.
DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
DEBUG: No need to upgrade! xorg-libXt 1.0.6_0 >= xorg-libXt 1.0.6_0
DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
DEBUG: No need to upgrade! mesa 7.6_0 >= mesa 7.6_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: aspell 0.60.6_2 exists in the ports tree
DEBUG: aspell 0.60.6_2 +macosx is the latest installed
DEBUG: aspell 0.60.6_2 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port aspell.
DEBUG: Requested variant i386 is not provided by port aspell.
DEBUG: Executing variant macosx provides macosx
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: texinfo 4.13_0 exists in the ports tree
DEBUG: texinfo 4.13_0  is the latest installed
DEBUG: texinfo 4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port texinfo.
DEBUG: Requested variant i386 is not provided by port texinfo.
DEBUG: Requested variant macosx is not provided by port texinfo.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lzmautils 4.32.7_1 exists in the ports tree
DEBUG: lzmautils 4.32.7_1  is the latest installed
DEBUG: lzmautils 4.32.7_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port lzmautils.
DEBUG: Requested variant i386 is not provided by port lzmautils.
DEBUG: Requested variant macosx is not provided by port lzmautils.
DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1
DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0
DEBUG: No need to upgrade! aspell 0.60.6_2 >= aspell 0.60.6_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: flex 2.5.35_0 exists in the ports tree
DEBUG: flex 2.5.35_0  is the latest installed
DEBUG: flex 2.5.35_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port flex.
DEBUG: Requested variant i386 is not provided by port flex.
DEBUG: Requested variant macosx is not provided by port flex.
DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.22.0_1 exists in the ports tree
DEBUG: glib2 2.22.0_1 +darwin is the latest installed
DEBUG: glib2 2.22.0_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port glib2.
DEBUG: Requested variant macosx is not provided by port glib2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python_select 0.3_0 exists in the ports tree
DEBUG: python_select 0.3_0 +darwin_10 is the latest installed
DEBUG: python_select 0.3_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port python_select.
DEBUG: Requested variant i386 is not provided by port python_select.
DEBUG: Requested variant macosx is not provided by port python_select.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
DEBUG: No need to upgrade! glib2 2.22.0_1 >= glib2 2.22.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hicolor-icon-theme 0.10_0 exists in the ports tree
DEBUG: hicolor-icon-theme 0.10_0  is the latest installed
DEBUG: hicolor-icon-theme 0.10_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port hicolor-icon-theme.
DEBUG: Requested variant i386 is not provided by port hicolor-icon-theme.
DEBUG: Requested variant macosx is not provided by port hicolor-icon-theme.
DEBUG: No need to upgrade! hicolor-icon-theme 0.10_0 >= hicolor-icon-theme 0.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jasper 1.900.1_5 exists in the ports tree
DEBUG: jasper 1.900.1_5  is the latest installed
DEBUG: jasper 1.900.1_5  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port jasper.
DEBUG: Requested variant i386 is not provided by port jasper.
DEBUG: Requested variant macosx is not provided by port jasper.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
DEBUG: unzip is *not* installed by MacPorts
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: unzip not installed, soft dependency satisfied
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 6b_3 exists in the ports tree
DEBUG: jpeg 6b_3  is the latest installed
DEBUG: jpeg 6b_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant i386 is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3
DEBUG: No need to upgrade! jasper 1.900.1_5 >= jasper 1.900.1_5
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
DEBUG: libart_lgpl 2.3.20_0  is the latest installed
DEBUG: libart_lgpl 2.3.20_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libart_lgpl.
DEBUG: Requested variant i386 is not provided by port libart_lgpl.
DEBUG: Requested variant macosx is not provided by port libart_lgpl.
DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libidn 1.15_0 exists in the ports tree
DEBUG: libidn 1.15_0  is the latest installed
DEBUG: libidn 1.15_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libidn.
DEBUG: Requested variant i386 is not provided by port libidn.
DEBUG: Requested variant macosx is not provided by port libidn.
DEBUG: No need to upgrade! libidn 1.15_0 >= libidn 1.15_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.38_0 exists in the ports tree
DEBUG: libpng 1.2.38_0  is the latest installed
DEBUG: libpng 1.2.38_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant i386 is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: No need to upgrade! libpng 1.2.38_0 >= libpng 1.2.38_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.5_0 exists in the ports tree
DEBUG: libxml2 2.7.5_0  is the latest installed
DEBUG: libxml2 2.7.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant i386 is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: No need to upgrade! libxml2 2.7.5_0 >= libxml2 2.7.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxslt 1.1.26_0 exists in the ports tree
DEBUG: libxslt 1.1.26_0  is the latest installed
DEBUG: libxslt 1.1.26_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libxslt.
DEBUG: Requested variant i386 is not provided by port libxslt.
DEBUG: Requested variant macosx is not provided by port libxslt.
DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pcre 7.9_0 exists in the ports tree
DEBUG: pcre 7.9_0  is the latest installed
DEBUG: pcre 7.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port pcre.
DEBUG: Requested variant i386 is not provided by port pcre.
DEBUG: Requested variant macosx is not provided by port pcre.
DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.1_0 exists in the ports tree
DEBUG: tiff 3.9.1_0 +macosx is the latest installed
DEBUG: tiff 3.9.1_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port tiff.
DEBUG: Requested variant i386 is not provided by port tiff.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! tiff 3.9.1_0 >= tiff 3.9.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: openexr 1.6.1_1 exists in the ports tree
DEBUG: openexr 1.6.1_1  is the latest installed
DEBUG: openexr 1.6.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port openexr.
DEBUG: Requested variant i386 is not provided by port openexr.
DEBUG: Requested variant macosx is not provided by port openexr.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ilmbase 1.0.1_2 exists in the ports tree
DEBUG: ilmbase 1.0.1_2  is the latest installed
DEBUG: ilmbase 1.0.1_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port ilmbase.
DEBUG: Requested variant i386 is not provided by port ilmbase.
DEBUG: Requested variant macosx is not provided by port ilmbase.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gsed 4.2.1_0 exists in the ports tree
DEBUG: gsed 4.2.1_0  is the latest installed
DEBUG: gsed 4.2.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gsed.
DEBUG: Requested variant i386 is not provided by port gsed.
DEBUG: Requested variant macosx is not provided by port gsed.
DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: qt3 3.3.8_7 exists in the ports tree
DEBUG: qt3 3.3.8_7 +darwin_10 is the latest installed
DEBUG: qt3 3.3.8_7 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/qt3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port qt3.
DEBUG: Requested variant i386 is not provided by port qt3.
DEBUG: Requested variant macosx is not provided by port qt3.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree
DEBUG: xorg-libXcursor 1.1.10_0  is the latest installed
DEBUG: xorg-libXcursor 1.1.10_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree
DEBUG: xorg-libXinerama 1.1_0  is the latest installed
DEBUG: xorg-libXinerama 1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree
DEBUG: xorg-xineramaproto 1.2_0  is the latest installed
DEBUG: xorg-xineramaproto 1.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto.
DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto.
DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto.
DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0
DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
DEBUG: xorg-libXrandr 1.3.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-randrproto 1.3.0_0 exists in the ports tree
DEBUG: xorg-randrproto 1.3.0_0  is the latest installed
DEBUG: xorg-randrproto 1.3.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
DEBUG: No need to upgrade! xorg-randrproto 1.3.0_0 >= xorg-randrproto 1.3.0_0
DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1
DEBUG: No need to upgrade! qt3 3.3.8_7 >= qt3 3.3.8_7
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/dejavu-fonts
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dejavu-fonts 2.29_0 exists in the ports tree
DEBUG: dejavu-fonts 2.29_0  is the latest installed
DEBUG: dejavu-fonts 2.29_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/dejavu-fonts
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port dejavu-fonts.
DEBUG: Requested variant i386 is not provided by port dejavu-fonts.
DEBUG: Requested variant macosx is not provided by port dejavu-fonts.
DEBUG: No need to upgrade! dejavu-fonts 2.29_0 >= dejavu-fonts 2.29_0
DEBUG: No need to upgrade! kdelibs3 3.5.10_2 >= kdelibs3 3.5.10_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdebase3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: kdebase3 3.5.10_4 exists in the ports tree
DEBUG: kdebase3 3.5.10_4 +darwin_10 is the latest installed
DEBUG: kdebase3 3.5.10_4 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdebase3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kdebase3.
DEBUG: Requested variant i386 is not provided by port kdebase3.
DEBUG: Requested variant macosx is not provided by port kdebase3.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/imake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: imake 1.0.2_1 exists in the ports tree
DEBUG: imake 1.0.2_1  is the latest installed
DEBUG: imake 1.0.2_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/imake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port imake.
DEBUG: Requested variant i386 is not provided by port imake.
DEBUG: Requested variant macosx is not provided by port imake.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-cf-files
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-cf-files 1.0.2_3 exists in the ports tree
DEBUG: xorg-cf-files 1.0.2_3  is the latest installed
DEBUG: xorg-cf-files 1.0.2_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-cf-files
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-cf-files.
DEBUG: Requested variant i386 is not provided by port xorg-cf-files.
DEBUG: Requested variant macosx is not provided by port xorg-cf-files.
DEBUG: No need to upgrade! xorg-cf-files 1.0.2_3 >= xorg-cf-files 1.0.2_3
DEBUG: No need to upgrade! imake 1.0.2_1 >= imake 1.0.2_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cyrus-sasl2 2.1.23_0 exists in the ports tree
DEBUG: cyrus-sasl2 2.1.23_0 +kerberos is the latest installed
DEBUG: cyrus-sasl2 2.1.23_0 +kerberos is active
DEBUG: Merging existing variants kerberos into variants
DEBUG: new fully merged portvariants: kerberos +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port cyrus-sasl2.
DEBUG: Requested variant i386 is not provided by port cyrus-sasl2.
DEBUG: Requested variant macosx is not provided by port cyrus-sasl2.
DEBUG: Executing variant kerberos provides kerberos
DEBUG: No need to upgrade! cyrus-sasl2 2.1.23_0 >= cyrus-sasl2 2.1.23_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb-compat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libusb-compat 0.1.3_0 exists in the ports tree
DEBUG: libusb-compat 0.1.3_0  is the latest installed
DEBUG: libusb-compat 0.1.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb-compat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libusb-compat.
DEBUG: Requested variant i386 is not provided by port libusb-compat.
DEBUG: Requested variant macosx is not provided by port libusb-compat.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libusb 1.0.3_0 exists in the ports tree
DEBUG: libusb 1.0.3_0  is the latest installed
DEBUG: libusb 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libusb.
DEBUG: Requested variant i386 is not provided by port libusb.
DEBUG: Requested variant macosx is not provided by port libusb.
DEBUG: No need to upgrade! libusb 1.0.3_0 >= libusb 1.0.3_0
DEBUG: No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat 0.1.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXcomposite 0.4.0_1 exists in the ports tree
DEBUG: xorg-libXcomposite 0.4.0_1  is the latest installed
DEBUG: xorg-libXcomposite 0.4.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXcomposite.
DEBUG: Requested variant i386 is not provided by port xorg-libXcomposite.
DEBUG: Requested variant macosx is not provided by port xorg-libXcomposite.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-compositeproto 0.4_0 exists in the ports tree
DEBUG: xorg-compositeproto 0.4_0  is the latest installed
DEBUG: xorg-compositeproto 0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-compositeproto.
DEBUG: Requested variant i386 is not provided by port xorg-compositeproto.
DEBUG: Requested variant macosx is not provided by port xorg-compositeproto.
DEBUG: No need to upgrade! xorg-compositeproto 0.4_0 >= xorg-compositeproto 0.4_0
DEBUG: No need to upgrade! xorg-libXcomposite 0.4.0_1 >= xorg-libXcomposite 0.4.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdamage 1.1.1_1 exists in the ports tree
DEBUG: xorg-libXdamage 1.1.1_1  is the latest installed
DEBUG: xorg-libXdamage 1.1.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdamage.
DEBUG: Requested variant i386 is not provided by port xorg-libXdamage.
DEBUG: Requested variant macosx is not provided by port xorg-libXdamage.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-damageproto 1.2.0_0  is the latest installed
DEBUG: xorg-damageproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-damageproto.
DEBUG: Requested variant i386 is not provided by port xorg-damageproto.
DEBUG: Requested variant macosx is not provided by port xorg-damageproto.
DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0
DEBUG: No need to upgrade! xorg-libXdamage 1.1.1_1 >= xorg-libXdamage 1.1.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbfile
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libxkbfile 1.0.5_1 exists in the ports tree
DEBUG: xorg-libxkbfile 1.0.5_1  is the latest installed
DEBUG: xorg-libxkbfile 1.0.5_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbfile
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libxkbfile.
DEBUG: Requested variant i386 is not provided by port xorg-libxkbfile.
DEBUG: Requested variant macosx is not provided by port xorg-libxkbfile.
DEBUG: No need to upgrade! xorg-libxkbfile 1.0.5_1 >= xorg-libxkbfile 1.0.5_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXtst
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXtst 1.0.99.2_0 exists in the ports tree
DEBUG: xorg-libXtst 1.0.99.2_0  is the latest installed
DEBUG: xorg-libXtst 1.0.99.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXtst
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXtst.
DEBUG: Requested variant i386 is not provided by port xorg-libXtst.
DEBUG: Requested variant macosx is not provided by port xorg-libXtst.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-recordproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-recordproto 1.14_0 exists in the ports tree
DEBUG: xorg-recordproto 1.14_0  is the latest installed
DEBUG: xorg-recordproto 1.14_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-recordproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-recordproto.
DEBUG: Requested variant i386 is not provided by port xorg-recordproto.
DEBUG: Requested variant macosx is not provided by port xorg-recordproto.
DEBUG: No need to upgrade! xorg-recordproto 1.14_0 >= xorg-recordproto 1.14_0
DEBUG: No need to upgrade! xorg-libXtst 1.0.99.2_0 >= xorg-libXtst 1.0.99.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86misc
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXxf86misc 1.0.1_2 exists in the ports tree
DEBUG: xorg-libXxf86misc 1.0.1_2  is the latest installed
DEBUG: xorg-libXxf86misc 1.0.1_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86misc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXxf86misc.
DEBUG: Requested variant i386 is not provided by port xorg-libXxf86misc.
DEBUG: Requested variant macosx is not provided by port xorg-libXxf86misc.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86miscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86miscproto 0.9.2_0 exists in the ports tree
DEBUG: xorg-xf86miscproto 0.9.2_0  is the latest installed
DEBUG: xorg-xf86miscproto 0.9.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86miscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xf86miscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xf86miscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xf86miscproto.
DEBUG: No need to upgrade! xorg-xf86miscproto 0.9.2_0 >= xorg-xf86miscproto 0.9.2_0
DEBUG: No need to upgrade! xorg-libXxf86misc 1.0.1_2 >= xorg-libXxf86misc 1.0.1_2
DEBUG: No need to upgrade! kdebase3 3.5.10_4 >= kdebase3 3.5.10_4
--->  Computing dependencies for kde
DEBUG: Searching for dependency: kdelibs3
DEBUG: Found Dependency: receipt exists for kdelibs3
DEBUG: Searching for dependency: kdebase3
DEBUG: Found Dependency: receipt exists for kdebase3
DEBUG: Searching for dependency: kdenetwork3
DEBUG: Didn't find receipt, going to depspec regex for: kdenetwork3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdenetwork3
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdenetwork3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kdenetwork3.
DEBUG: Requested variant i386 is not provided by port kdenetwork3.
DEBUG: Requested variant macosx is not provided by port kdenetwork3.
DEBUG: Searching for dependency: kdepim3
DEBUG: Didn't find receipt, going to depspec regex for: kdepim3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdepim3
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdepim3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kdepim3.
DEBUG: Requested variant i386 is not provided by port kdepim3.
DEBUG: Requested variant macosx is not provided by port kdepim3.
DEBUG: Searching for dependency: kdeutils3
DEBUG: Didn't find receipt, going to depspec regex for: kdeutils3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeutils3
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeutils3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kdeutils3.
DEBUG: Requested variant i386 is not provided by port kdeutils3.
DEBUG: Requested variant macosx is not provided by port kdeutils3.
DEBUG: Searching for dependency: kdebase3
DEBUG: Found Dependency: receipt exists for kdebase3
DEBUG: Searching for dependency: openslp
DEBUG: Found Dependency: receipt exists for openslp
DEBUG: Searching for dependency: xorg-libXxf86vm
DEBUG: Didn't find receipt, going to depspec regex for: xorg-libXxf86vm
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86vm
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86vm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXxf86vm.
DEBUG: Requested variant i386 is not provided by port xorg-libXxf86vm.
DEBUG: Requested variant macosx is not provided by port xorg-libXxf86vm.
DEBUG: Searching for dependency: autoconf263
DEBUG: Found Dependency: receipt exists for autoconf263
DEBUG: Searching for dependency: unsermake
DEBUG: Found Dependency: receipt exists for unsermake
DEBUG: Searching for dependency: xorg-libXext
DEBUG: Found Dependency: receipt exists for xorg-libXext
DEBUG: Searching for dependency: xorg-xf86vidmodeproto
DEBUG: Found Dependency: receipt exists for xorg-xf86vidmodeproto
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: gpgme
DEBUG: Didn't find receipt, going to depspec regex for: gpgme
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gpgme.
DEBUG: Requested variant i386 is not provided by port gpgme.
DEBUG: Requested variant macosx is not provided by port gpgme.
DEBUG: Searching for dependency: kdeaccessibility3
DEBUG: Didn't find receipt, going to depspec regex for: kdeaccessibility3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeaccessibility3
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdeaccessibility3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port kdeaccessibility3.
DEBUG: Requested variant i386 is not provided by port kdeaccessibility3.
DEBUG: Requested variant macosx is not provided by port kdeaccessibility3.
DEBUG: Searching for dependency: kdebase3
DEBUG: Found Dependency: receipt exists for kdebase3
DEBUG: Searching for dependency: libgpg-error
DEBUG: Didn't find receipt, going to depspec regex for: libgpg-error
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgpg-error.
DEBUG: Requested variant i386 is not provided by port libgpg-error.
DEBUG: Requested variant macosx is not provided by port libgpg-error.
DEBUG: Searching for dependency: opensync
DEBUG: Didn't find receipt, going to depspec regex for: opensync
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opensync
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opensync
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port opensync.
DEBUG: Requested variant i386 is not provided by port opensync.
DEBUG: Requested variant macosx is not provided by port opensync.
DEBUG: Searching for dependency: autoconf263
DEBUG: Found Dependency: receipt exists for autoconf263
DEBUG: Searching for dependency: unsermake
DEBUG: Found Dependency: receipt exists for unsermake
DEBUG: Searching for dependency: gnupg
DEBUG: Didn't find receipt, going to depspec regex for: gnupg
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnupg.
DEBUG: Requested variant i386 is not provided by port gnupg.
DEBUG: Requested variant macosx is not provided by port gnupg.
DEBUG: Searching for dependency: pth
DEBUG: Didn't find receipt, going to depspec regex for: pth
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pth.
DEBUG: Requested variant i386 is not provided by port pth.
DEBUG: Requested variant macosx is not provided by port pth.
DEBUG: Searching for dependency: libgpg-error
DEBUG: Didn't find receipt, going to depspec regex for: libgpg-error
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: kdebase3
DEBUG: Found Dependency: receipt exists for kdebase3
DEBUG: Searching for dependency: autoconf263
DEBUG: Found Dependency: receipt exists for autoconf263
DEBUG: Searching for dependency: unsermake
DEBUG: Found Dependency: receipt exists for unsermake
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: libxml2
DEBUG: Found Dependency: receipt exists for libxml2
DEBUG: Searching for dependency: py26-gobject
DEBUG: Didn't find receipt, going to depspec regex for: py26-gobject
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port py26-gobject.
DEBUG: Requested variant i386 is not provided by port py26-gobject.
DEBUG: Requested variant macosx is not provided by port py26-gobject.
DEBUG: Searching for dependency: py26-numeric
DEBUG: Didn't find receipt, going to depspec regex for: py26-numeric
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numeric
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numeric
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py26-numeric.
DEBUG: Requested variant i386 is not provided by port py26-numeric.
DEBUG: Executing variant macosx provides macosx
DEBUG: Searching for dependency: python26
DEBUG: Found Dependency: receipt exists for python26
DEBUG: Searching for dependency: sqlite3
DEBUG: Found Dependency: receipt exists for sqlite3
DEBUG: Searching for dependency: swig
DEBUG: Didn't find receipt, going to depspec regex for: swig
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port swig.
DEBUG: Requested variant i386 is not provided by port swig.
DEBUG: Requested variant macosx is not provided by port swig.
DEBUG: Executing variant python provides python
DEBUG: Executing variant perl provides perl
DEBUG: Executing variant ruby provides ruby
DEBUG: Executing variant php5 provides php5
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: libxslt
DEBUG: Found Dependency: receipt exists for libxslt
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: libffi
DEBUG: Didn't find receipt, going to depspec regex for: libffi
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libffi.
DEBUG: Requested variant i386 is not provided by port libffi.
DEBUG: Requested variant macosx is not provided by port libffi.
DEBUG: Searching for dependency: python26
DEBUG: Found Dependency: receipt exists for python26
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: python26
DEBUG: Found Dependency: receipt exists for python26
DEBUG: Searching for dependency: python_select
DEBUG: Found Dependency: receipt exists for python_select
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: ruby
DEBUG: Didn't find receipt, going to depspec regex for: ruby
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ruby
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port ruby.
DEBUG: Requested variant macosx is not provided by port ruby.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant thread_hooks provides thread_hooks
DEBUG: Searching for dependency: php5
DEBUG: Didn't find receipt, going to depspec regex for: php5
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port php5.
DEBUG: Requested variant i386 is not provided by port php5.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant apache2 provides apache2
DEBUG: Searching for dependency: bison
DEBUG: Didn't find receipt, going to depspec regex for: bison
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port bison.
DEBUG: Requested variant i386 is not provided by port bison.
DEBUG: Requested variant macosx is not provided by port bison.
DEBUG: Searching for dependency: gsed
DEBUG: Found Dependency: receipt exists for gsed
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: ncurses
DEBUG: Found Dependency: receipt exists for ncurses
DEBUG: Checking for conflicts against php5
DEBUG: Searching for dependency: php5-devel
DEBUG: Didn't find receipt, going to depspec regex for: php5-devel
DEBUG: Searching for dependency: php52
DEBUG: Didn't find receipt, going to depspec regex for: php52
DEBUG: Searching for dependency: gsed
DEBUG: Found Dependency: receipt exists for gsed
DEBUG: Searching for dependency: libtool
DEBUG: Found Dependency: receipt exists for libtool
DEBUG: Searching for dependency: libxml2
DEBUG: Found Dependency: receipt exists for libxml2
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: mhash
DEBUG: Didn't find receipt, going to depspec regex for: mhash
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port mhash.
DEBUG: Requested variant i386 is not provided by port mhash.
DEBUG: Requested variant macosx is not provided by port mhash.
DEBUG: Searching for dependency: pcre
DEBUG: Found Dependency: receipt exists for pcre
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: apache2
DEBUG: Didn't find receipt, going to depspec regex for: apache2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port apache2.
DEBUG: Requested variant macosx is not provided by port apache2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant preforkmpm provides preforkmpm
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: autoconf213
DEBUG: Didn't find receipt, going to depspec regex for: autoconf213
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf213.
DEBUG: Requested variant i386 is not provided by port autoconf213.
DEBUG: Requested variant macosx is not provided by port autoconf213.
DEBUG: Checking for conflicts against apache2
DEBUG: Searching for dependency: apache
DEBUG: Didn't find receipt, going to depspec regex for: apache
DEBUG: Searching for dependency: apr
DEBUG: Didn't find receipt, going to depspec regex for: apr
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port apr.
DEBUG: Requested variant i386 is not provided by port apr.
DEBUG: Requested variant macosx is not provided by port apr.
DEBUG: Searching for dependency: apr-util
DEBUG: Didn't find receipt, going to depspec regex for: apr-util
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port apr-util.
DEBUG: Requested variant i386 is not provided by port apr-util.
DEBUG: Requested variant macosx is not provided by port apr-util.
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Searching for dependency: pcre
DEBUG: Found Dependency: receipt exists for pcre
DEBUG: Searching for dependency: apr
DEBUG: Didn't find receipt, going to depspec regex for: apr
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: db46
DEBUG: Found Dependency: receipt exists for db46
DEBUG: Searching for dependency: sqlite3
DEBUG: Found Dependency: receipt exists for sqlite3
DEBUG: Searching for dependency: perl5
DEBUG: Found Dependency: receipt exists for perl5
DEBUG: Searching for dependency: m4
DEBUG: Found Dependency: receipt exists for m4
DEBUG: Searching for dependency: gawk
DEBUG: Didn't find receipt, going to depspec regex for: gawk
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gawk.
DEBUG: Requested variant i386 is not provided by port gawk.
DEBUG: Requested variant macosx is not provided by port gawk.
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: m4
DEBUG: Found Dependency: receipt exists for m4
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: gmp
DEBUG: Didn't find receipt, going to depspec regex for: gmp
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.0.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gmp.
DEBUG: Requested variant i386 is not provided by port gmp.
DEBUG: Requested variant macosx is not provided by port gmp.
DEBUG: Searching for dependency: kdebase3
DEBUG: Found Dependency: receipt exists for kdebase3
DEBUG: Searching for dependency: autoconf263
DEBUG: Found Dependency: receipt exists for autoconf263
DEBUG: Searching for dependency: unsermake
DEBUG: Found Dependency: receipt exists for unsermake
DEBUG: Executing org.macports.main (xorg-libXxf86vm)
DEBUG: Skipping completed org.macports.fetch (xorg-libXxf86vm)
DEBUG: Skipping completed org.macports.checksum (xorg-libXxf86vm)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (xorg-libXxf86vm)
DEBUG: Skipping completed org.macports.patch (xorg-libXxf86vm)
DEBUG: Skipping completed org.macports.configure (xorg-libXxf86vm)
--->  Building xorg-libXxf86vm
DEBUG: Executing org.macports.build (xorg-libXxf86vm)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXxf86vm/work/libXxf86vm-1.0.2" && /usr/bin/make -j2 all'
Making all in src
/usr/bin/make  all-am
/bin/sh ../libtool --tag=CC   --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.   -I/opt/local/include -I/opt/local/include    -O2 -arch x86_64 -MT XF86VMode.lo -MD -MP -MF .deps/XF86VMode.Tpo -c -o XF86VMode.lo XF86VMode.c
 /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I/opt/local/include -I/opt/local/include -O2 -arch x86_64 -MT XF86VMode.lo -MD -MP -MF .deps/XF86VMode.Tpo -c XF86VMode.c  -fno-common -DPIC -o .libs/XF86VMode.o
In file included from XF86VMode.c:36:
/opt/local/include/X11/extensions/xf86vmstr.h:1:2: warning: #warning "xf86vmstr.h is obsolete and may be removed in the future."
/opt/local/include/X11/extensions/xf86vmstr.h:2:2: warning: #warning "include <X11/extensions/xf86vmproto.h> for the protocol defines."
XF86VMode.c:156: error: expected declaration specifiers or '...' before 'XF86VidModeGamma'
XF86VMode.c: In function 'XF86VidModeSetGamma':
XF86VMode.c:168: error: 'Gamma' undeclared (first use in this function)
XF86VMode.c:168: error: (Each undeclared identifier is reported only once
XF86VMode.c:168: error: for each function it appears in.)
XF86VMode.c: At top level:
XF86VMode.c:177: error: expected declaration specifiers or '...' before 'XF86VidModeGamma'
XF86VMode.c: In function 'XF86VidModeGetGamma':
XF86VMode.c:195: error: 'Gamma' undeclared (first use in this function)
XF86VMode.c: In function 'XF86VidModeGetModeLine':
XF86VMode.c:208: error: expected declaration specifiers before 'XF86VidModeModeLine'
XF86VMode.c:233: error: invalid type argument of '->'
XF86VMode.c:234: error: invalid type argument of '->'
XF86VMode.c:235: error: invalid type argument of '->'
XF86VMode.c:236: error: invalid type argument of '->'
XF86VMode.c:237: error: invalid type argument of '->'
XF86VMode.c:238: error: invalid type argument of '->'
XF86VMode.c:239: error: invalid type argument of '->'
XF86VMode.c:240: error: invalid type argument of '->'
XF86VMode.c:241: error: invalid type argument of '->'
XF86VMode.c:242: error: invalid type argument of '->'
XF86VMode.c:243: error: invalid type argument of '->'
XF86VMode.c:252: error: invalid type argument of '->'
XF86VMode.c:253: error: invalid type argument of '->'
XF86VMode.c:254: error: invalid type argument of '->'
XF86VMode.c:255: error: invalid type argument of '->'
XF86VMode.c:256: error: invalid type argument of '->'
XF86VMode.c:257: error: invalid type argument of '->'
XF86VMode.c:258: error: invalid type argument of '->'
XF86VMode.c:259: error: invalid type argument of '->'
XF86VMode.c:260: error: invalid type argument of '->'
XF86VMode.c:261: error: invalid type argument of '->'
XF86VMode.c:262: error: invalid type argument of '->'
XF86VMode.c:265: error: invalid type argument of '->'
XF86VMode.c:266: error: invalid type argument of '->'
XF86VMode.c:266: error: invalid type argument of '->'
XF86VMode.c:267: error: invalid type argument of '->'
XF86VMode.c:268: error: invalid type argument of '->'
XF86VMode.c:271: error: invalid type argument of '->'
XF86VMode.c:271: error: invalid type argument of '->'
XF86VMode.c:273: error: invalid type argument of '->'
XF86VMode.c: In function 'XF86VidModeGetAllModeLines':
XF86VMode.c:285: error: expected declaration specifiers before 'XF86VidModeModeInfo'
XF86VMode.c:290: error: 'XF86VidModeModeInfo' undeclared (first use in this function)
XF86VMode.c:290: error: 'mdinfptr' undeclared (first use in this function)
XF86VMode.c:290: error: 'modelines' undeclared (first use in this function)
XF86VMode.c:329: error: expected expression before ')' token
XF86VMode.c:339: error: expected expression before ')' token
XF86VMode.c:410: error: invalid type argument of 'unary *'
XF86VMode.c: In function 'XF86VidModeAddModeLine':
XF86VMode.c:446: error: expected declaration specifiers before 'XF86VidModeModeInfo'
XF86VMode.c:447: error: expected declaration specifiers before 'XF86VidModeModeInfo'
XF86VMode.c:463: error: invalid type argument of '->'
XF86VMode.c:464: error: invalid type argument of '->'
XF86VMode.c:465: error: invalid type argument of '->'
XF86VMode.c:466: error: invalid type argument of '->'
XF86VMode.c:467: error: invalid type argument of '->'
XF86VMode.c:468: error: invalid type argument of '->'
XF86VMode.c:469: error: invalid type argument of '->'
XF86VMode.c:470: error: invalid type argument of '->'
XF86VMode.c:471: error: invalid type argument of '->'
XF86VMode.c:472: error: invalid type argument of '->'
XF86VMode.c:473: error: invalid type argument of '->'
XF86VMode.c:474: warning: comparison between pointer and integer
XF86VMode.c:475: error: invalid type argument of '->'
XF86VMode.c:476: error: invalid type argument of '->'
XF86VMode.c:477: error: invalid type argument of '->'
XF86VMode.c:478: error: invalid type argument of '->'
XF86VMode.c:479: error: invalid type argument of '->'
XF86VMode.c:480: error: invalid type argument of '->'
XF86VMode.c:481: error: invalid type argument of '->'
XF86VMode.c:482: error: invalid type argument of '->'
XF86VMode.c:483: error: invalid type argument of '->'
XF86VMode.c:484: error: invalid type argument of '->'
XF86VMode.c:497: error: invalid type argument of '->'
XF86VMode.c:498: error: invalid type argument of '->'
XF86VMode.c:499: error: invalid type argument of '->'
XF86VMode.c:499: error: invalid type argument of '->'
XF86VMode.c:507: error: invalid type argument of '->'
XF86VMode.c:508: error: invalid type argument of '->'
XF86VMode.c:509: error: invalid type argument of '->'
XF86VMode.c:510: error: invalid type argument of '->'
XF86VMode.c:511: error: invalid type argument of '->'
XF86VMode.c:512: error: invalid type argument of '->'
XF86VMode.c:513: error: invalid type argument of '->'
XF86VMode.c:514: error: invalid type argument of '->'
XF86VMode.c:515: error: invalid type argument of '->'
XF86VMode.c:516: error: invalid type argument of '->'
XF86VMode.c:517: error: invalid type argument of '->'
XF86VMode.c:518: error: invalid type argument of '->'
XF86VMode.c:519: warning: comparison between pointer and integer
XF86VMode.c:520: error: invalid type argument of '->'
XF86VMode.c:521: error: invalid type argument of '->'
XF86VMode.c:522: error: invalid type argument of '->'
XF86VMode.c:523: error: invalid type argument of '->'
XF86VMode.c:524: error: invalid type argument of '->'
XF86VMode.c:525: error: invalid type argument of '->'
XF86VMode.c:526: error: invalid type argument of '->'
XF86VMode.c:527: error: invalid type argument of '->'
XF86VMode.c:528: error: invalid type argument of '->'
XF86VMode.c:529: error: invalid type argument of '->'
XF86VMode.c:530: error: invalid type argument of '->'
XF86VMode.c:544: error: invalid type argument of '->'
XF86VMode.c:545: error: invalid type argument of '->'
XF86VMode.c:546: error: invalid type argument of '->'
XF86VMode.c:546: error: invalid type argument of '->'
XF86VMode.c: In function 'XF86VidModeDeleteModeLine':
XF86VMode.c:559: error: expected declaration specifiers before 'XF86VidModeModeInfo'
XF86VMode.c:575: error: invalid type argument of '->'
XF86VMode.c:576: error: invalid type argument of '->'
XF86VMode.c:577: error: invalid type argument of '->'
XF86VMode.c:578: error: invalid type argument of '->'
XF86VMode.c:579: error: invalid type argument of '->'
XF86VMode.c:580: error: invalid type argument of '->'
XF86VMode.c:581: error: invalid type argument of '->'
XF86VMode.c:582: error: invalid type argument of '->'
XF86VMode.c:583: error: invalid type argument of '->'
XF86VMode.c:584: error: invalid type argument of '->'
XF86VMode.c:585: error: invalid type argument of '->'
XF86VMode.c:586: error: invalid type argument of '->'
XF86VMode.c:587: error: invalid type argument of '->'
XF86VMode.c:588: error: invalid type argument of '->'
XF86VMode.c:588: error: invalid type argument of '->'
XF86VMode.c:596: error: invalid type argument of '->'
XF86VMode.c:597: error: invalid type argument of '->'
XF86VMode.c:598: error: invalid type argument of '->'
XF86VMode.c:599: error: invalid type argument of '->'
XF86VMode.c:600: error: invalid type argument of '->'
XF86VMode.c:601: error: invalid type argument of '->'
XF86VMode.c:602: error: invalid type argument of '->'
XF86VMode.c:603: error: invalid type argument of '->'
XF86VMode.c:604: error: invalid type argument of '->'
XF86VMode.c:605: error: invalid type argument of '->'
XF86VMode.c:606: error: invalid type argument of '->'
XF86VMode.c:607: error: invalid type argument of '->'
XF86VMode.c:608: error: invalid type argument of '->'
XF86VMode.c:609: error: invalid type argument of '->'
XF86VMode.c:610: error: invalid type argument of '->'
XF86VMode.c:610: error: invalid type argument of '->'
XF86VMode.c: In function 'XF86VidModeModModeLine':
XF86VMode.c:623: error: expected declaration specifiers before 'XF86VidModeModeLine'
XF86VMode.c:639: error: invalid type argument of '->'
XF86VMode.c:640: error: invalid type argument of '->'
XF86VMode.c:641: error: invalid type argument of '->'
XF86VMode.c:642: error: invalid type argument of '->'
XF86VMode.c:643: error: invalid type argument of '->'
XF86VMode.c:644: error: invalid type argument of '->'
XF86VMode.c:645: error: invalid type argument of '->'
XF86VMode.c:646: error: invalid type argument of '->'
XF86VMode.c:647: error: invalid type argument of '->'
XF86VMode.c:648: error: invalid type argument of '->'
XF86VMode.c:649: error: invalid type argument of '->'
XF86VMode.c:650: error: invalid type argument of '->'
XF86VMode.c:651: error: invalid type argument of '->'
XF86VMode.c:651: error: invalid type argument of '->'
XF86VMode.c:659: error: invalid type argument of '->'
XF86VMode.c:660: error: invalid type argument of '->'
XF86VMode.c:661: error: invalid type argument of '->'
XF86VMode.c:662: error: invalid type argument of '->'
XF86VMode.c:663: error: invalid type argument of '->'
XF86VMode.c:664: error: invalid type argument of '->'
XF86VMode.c:665: error: invalid type argument of '->'
XF86VMode.c:666: error: invalid type argument of '->'
XF86VMode.c:667: error: invalid type argument of '->'
XF86VMode.c:668: error: invalid type argument of '->'
XF86VMode.c:669: error: invalid type argument of '->'
XF86VMode.c:670: error: invalid type argument of '->'
XF86VMode.c:671: error: invalid type argument of '->'
XF86VMode.c:672: error: invalid type argument of '->'
XF86VMode.c:672: error: invalid type argument of '->'
XF86VMode.c: In function 'XF86VidModeValidateModeLine':
XF86VMode.c:685: error: expected declaration specifiers before 'XF86VidModeModeInfo'
XF86VMode.c:703: error: invalid type argument of '->'
XF86VMode.c:704: error: invalid type argument of '->'
XF86VMode.c:705: error: invalid type argument of '->'
XF86VMode.c:706: error: invalid type argument of '->'
XF86VMode.c:707: error: invalid type argument of '->'
XF86VMode.c:708: error: invalid type argument of '->'
XF86VMode.c:709: error: invalid type argument of '->'
XF86VMode.c:710: error: invalid type argument of '->'
XF86VMode.c:711: error: invalid type argument of '->'
XF86VMode.c:712: error: invalid type argument of '->'
XF86VMode.c:713: error: invalid type argument of '->'
XF86VMode.c:714: error: invalid type argument of '->'
XF86VMode.c:715: error: invalid type argument of '->'
XF86VMode.c:716: error: invalid type argument of '->'
XF86VMode.c:716: error: invalid type argument of '->'
XF86VMode.c:724: error: invalid type argument of '->'
XF86VMode.c:725: error: invalid type argument of '->'
XF86VMode.c:726: error: invalid type argument of '->'
XF86VMode.c:727: error: invalid type argument of '->'
XF86VMode.c:728: error: invalid type argument of '->'
XF86VMode.c:729: error: invalid type argument of '->'
XF86VMode.c:730: error: invalid type argument of '->'
XF86VMode.c:731: error: invalid type argument of '->'
XF86VMode.c:732: error: invalid type argument of '->'
XF86VMode.c:733: error: invalid type argument of '->'
XF86VMode.c:734: error: invalid type argument of '->'
XF86VMode.c:735: error: invalid type argument of '->'
XF86VMode.c:736: error: invalid type argument of '->'
XF86VMode.c:737: error: invalid type argument of '->'
XF86VMode.c:738: error: invalid type argument of '->'
XF86VMode.c:738: error: invalid type argument of '->'
XF86VMode.c: In function 'XF86VidModeSwitchToMode':
XF86VMode.c:778: error: expected declaration specifiers before 'XF86VidModeModeInfo'
XF86VMode.c:811: error: invalid type argument of '->'
XF86VMode.c:812: error: invalid type argument of '->'
XF86VMode.c:813: error: invalid type argument of '->'
XF86VMode.c:814: error: invalid type argument of '->'
XF86VMode.c:815: error: invalid type argument of '->'
XF86VMode.c:816: error: invalid type argument of '->'
XF86VMode.c:817: error: invalid type argument of '->'
XF86VMode.c:818: error: invalid type argument of '->'
XF86VMode.c:819: error: invalid type argument of '->'
XF86VMode.c:820: error: invalid type argument of '->'
XF86VMode.c:824: error: invalid type argument of '->'
XF86VMode.c:825: error: invalid type argument of '->'
XF86VMode.c:826: error: invalid type argument of '->'
XF86VMode.c:827: error: invalid type argument of '->'
XF86VMode.c:827: error: invalid type argument of '->'
XF86VMode.c:836: error: invalid type argument of '->'
XF86VMode.c:837: error: invalid type argument of '->'
XF86VMode.c:838: error: invalid type argument of '->'
XF86VMode.c:839: error: invalid type argument of '->'
XF86VMode.c:840: error: invalid type argument of '->'
XF86VMode.c:841: error: invalid type argument of '->'
XF86VMode.c:842: error: invalid type argument of '->'
XF86VMode.c:843: error: invalid type argument of '->'
XF86VMode.c:844: error: invalid type argument of '->'
XF86VMode.c:845: error: invalid type argument of '->'
XF86VMode.c:846: error: invalid type argument of '->'
XF86VMode.c:850: error: invalid type argument of '->'
XF86VMode.c:851: error: invalid type argument of '->'
XF86VMode.c:852: error: invalid type argument of '->'
XF86VMode.c:853: error: invalid type argument of '->'
XF86VMode.c:853: error: invalid type argument of '->'
XF86VMode.c: In function 'XF86VidModeGetMonitor':
XF86VMode.c:889: error: expected declaration specifiers before 'XF86VidModeMonitor'
XF86VMode.c:909: error: invalid type argument of '->'
XF86VMode.c:910: error: invalid type argument of '->'
XF86VMode.c:915: error: invalid type argument of '->'
XF86VMode.c:921: error: invalid type argument of '->'
XF86VMode.c:924: error: invalid type argument of '->'
XF86VMode.c:927: error: invalid type argument of '->'
XF86VMode.c:928: error: invalid type argument of '->'
XF86VMode.c:932: error: invalid type argument of '->'
XF86VMode.c:934: error: invalid type argument of '->'
XF86VMode.c:934: error: 'XF86VidModeSyncRange' undeclared (first use in this function)
XF86VMode.c:938: error: invalid type argument of '->'
XF86VMode.c:939: error: invalid type argument of '->'
XF86VMode.c:940: error: invalid type argument of '->'
XF86VMode.c:941: error: invalid type argument of '->'
XF86VMode.c:944: error: invalid type argument of '->'
XF86VMode.c:947: error: invalid type argument of '->'
XF86VMode.c:948: error: invalid type argument of '->'
XF86VMode.c:949: error: invalid type argument of '->'
XF86VMode.c:950: error: invalid type argument of '->'
XF86VMode.c:951: error: invalid type argument of '->'
XF86VMode.c:956: error: invalid type argument of '->'
XF86VMode.c:957: error: invalid type argument of '->'
XF86VMode.c:961: error: invalid type argument of '->'
XF86VMode.c:962: error: invalid type argument of '->'
XF86VMode.c:965: error: invalid type argument of '->'
XF86VMode.c:967: error: invalid type argument of '->'
make[2]: *** [XF86VMode.lo] Error 1
make[1]: *** [all] Error 2
make: *** [all-recursive] Error 1
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXxf86vm/work/libXxf86vm-1.0.2" && /usr/bin/make -j2 all " returned error 2
Command output: XF86VMode.c:889: error: expected declaration specifiers before 'XF86VidModeMonitor'
XF86VMode.c:909: error: invalid type argument of '->'
XF86VMode.c:910: error: invalid type argument of '->'
XF86VMode.c:915: error: invalid type argument of '->'
XF86VMode.c:921: error: invalid type argument of '->'
XF86VMode.c:924: error: invalid type argument of '->'
XF86VMode.c:927: error: invalid type argument of '->'
XF86VMode.c:928: error: invalid type argument of '->'
XF86VMode.c:932: error: invalid type argument of '->'
XF86VMode.c:934: error: invalid type argument of '->'
XF86VMode.c:934: error: 'XF86VidModeSyncRange' undeclared (first use in this function)
XF86VMode.c:938: error: invalid type argument of '->'
XF86VMode.c:939: error: invalid type argument of '->'
XF86VMode.c:940: error: invalid type argument of '->'
XF86VMode.c:941: error: invalid type argument of '->'
XF86VMode.c:944: error: invalid type argument of '->'
XF86VMode.c:947: error: invalid type argument of '->'
XF86VMode.c:948: error: invalid type argument of '->'
XF86VMode.c:949: error: invalid type argument of '->'
XF86VMode.c:950: error: invalid type argument of '->'
XF86VMode.c:951: error: invalid type argument of '->'
XF86VMode.c:956: error: invalid type argument of '->'
XF86VMode.c:957: error: invalid type argument of '->'
XF86VMode.c:961: error: invalid type argument of '->'
XF86VMode.c:962: error: invalid type argument of '->'
XF86VMode.c:965: error: invalid type argument of '->'
XF86VMode.c:967: error: invalid type argument of '->'
make[2]: *** [XF86VMode.lo] Error 1
make[1]: *** [all] Error 2
make: *** [all-recursive] Error 1

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXxf86vm/work/libXxf86vm-1.0.2" && /usr/bin/make -j2 all " returned error 2
Command output: XF86VMode.c:889: error: expected declaration specifiers before 'XF86VidModeMonitor'
XF86VMode.c:909: error: invalid type argument of '->'
XF86VMode.c:910: error: invalid type argument of '->'
XF86VMode.c:915: error: invalid type argument of '->'
XF86VMode.c:921: error: invalid type argument of '->'
XF86VMode.c:924: error: invalid type argument of '->'
XF86VMode.c:927: error: invalid type argument of '->'
XF86VMode.c:928: error: invalid type argument of '->'
XF86VMode.c:932: error: invalid type argument of '->'
XF86VMode.c:934: error: invalid type argument of '->'
XF86VMode.c:934: error: 'XF86VidModeSyncRange' undeclared (first use in this function)
XF86VMode.c:938: error: invalid type argument of '->'
XF86VMode.c:939: error: invalid type argument of '->'
XF86VMode.c:940: error: invalid type argument of '->'
XF86VMode.c:941: error: invalid type argument of '->'
XF86VMode.c:944: error: invalid type argument of '->'
XF86VMode.c:947: error: invalid type argument of '->'
XF86VMode.c:948: error: invalid type argument of '->'
XF86VMode.c:949: error: invalid type argument of '->'
XF86VMode.c:950: error: invalid type argument of '->'
XF86VMode.c:951: error: invalid type argument of '->'
XF86VMode.c:956: error: invalid type argument of '->'
XF86VMode.c:957: error: invalid type argument of '->'
XF86VMode.c:961: error: invalid type argument of '->'
XF86VMode.c:962: error: invalid type argument of '->'
XF86VMode.c:965: error: invalid type argument of '->'
XF86VMode.c:967: error: invalid type argument of '->'
make[2]: *** [XF86VMode.lo] Error 1
make[1]: *** [all] Error 2
make: *** [all-recursive] Error 1

    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for xorg-libXxf86vm): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: The following dependencies failed to build: kdenetwork3 xorg-libXxf86vm kdepim3 gpgme gnupg libgpg-error pth kdeaccessibility3 opensync py26-gobject libffi py26-numeric swig bison php5 apache2 apr apr-util autoconf213 gawk mhash ruby kdeutils3 gmp
Error: Status 1 encountered during processing.