Installing ufraw fails with gimp problems

[nitai@…]

Hi there,

I tried to install ufraw with sudo port install ufraw, but it fails to do so since many weeks.

I have updated macports, have the correct python version installed (2.6.1), run gnome-keyring install and just about everything I could find on the net and on here. still no go.

Please find the detailed error report here with (sudo install -d ufraw)

DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port ufraw. DEBUG: Requested variant i386 is not provided by port ufraw. DEBUG: Requested variant macosx is not provided by port ufraw. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exiv2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: exiv2 0.18.2_0 exists in the ports tree DEBUG: exiv2 0.18.2_0 is the latest installed DEBUG: exiv2 0.18.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exiv2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port exiv2. DEBUG: Requested variant i386 is not provided by port exiv2. DEBUG: Requested variant macosx is not provided by port exiv2. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_0 exists in the ports tree DEBUG: libtool 2.2.6b_0 is the latest installed DEBUG: libtool 2.2.6b_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_0 exists in the ports tree DEBUG: autoconf 2.65_0 is the latest installed DEBUG: autoconf 2.65_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.36.4_1 exists in the ports tree DEBUG: help2man 1.36.4_1 is the latest installed DEBUG: help2man 1.36.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree DEBUG: p5-locale-gettext 1.05_0 is the latest installed DEBUG: p5-locale-gettext 1.05_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 is the latest installed DEBUG: libiconv 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1 DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0 DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_3 exists in the ports tree DEBUG: zlib 1.2.3_3 is the latest installed DEBUG: zlib 1.2.3_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3 DEBUG: No need to upgrade! exiv2 0.18.2_0 >= exiv2 0.18.2_0 ---> Computing dependencies for ufraw DEBUG: Searching for dependency: gimp2 DEBUG: Didn't find receipt, going to depspec regex for: gimp2 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gimp2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gimp2. DEBUG: Requested variant i386 is not provided by port gimp2. DEBUG: Requested variant macosx is not provided by port gimp2. DEBUG: Executing variant x11 provides x11 DEBUG: Searching for dependency: exiv2 DEBUG: Found Dependency: receipt exists for exiv2 DEBUG: Searching for dependency: gtkimageview DEBUG: Didn't find receipt, going to depspec regex for: gtkimageview DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gtkimageview DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gtkimageview DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gtkimageview. DEBUG: Requested variant i386 is not provided by port gtkimageview. DEBUG: Requested variant macosx is not provided by port gtkimageview. DEBUG: Searching for dependency: iso-codes DEBUG: Found Dependency: receipt exists for iso-codes DEBUG: Searching for dependency: gegl DEBUG: Found Dependency: receipt exists for gegl DEBUG: Searching for dependency: gtk2 DEBUG: Found Dependency: receipt exists for gtk2 DEBUG: Searching for dependency: libmng DEBUG: Found Dependency: receipt exists for libmng DEBUG: Searching for dependency: libexif DEBUG: Found Dependency: receipt exists for libexif DEBUG: Searching for dependency: aalib DEBUG: Found Dependency: receipt exists for aalib DEBUG: Searching for dependency: librsvg DEBUG: Found Dependency: receipt exists for librsvg DEBUG: Searching for dependency: poppler DEBUG: Found Dependency: receipt exists for poppler DEBUG: Searching for dependency: gnome-vfs DEBUG: Found Dependency: receipt exists for gnome-vfs DEBUG: Searching for dependency: libgnomeui DEBUG: Found Dependency: receipt exists for libgnomeui DEBUG: Searching for dependency: curl DEBUG: Found Dependency: receipt exists for curl DEBUG: Searching for dependency: libwmf DEBUG: Found Dependency: receipt exists for libwmf DEBUG: Searching for dependency: lcms DEBUG: Found Dependency: receipt exists for lcms DEBUG: Searching for dependency: dbus-glib DEBUG: Found Dependency: receipt exists for dbus-glib DEBUG: Searching for dependency: py25-gtk DEBUG: Found Dependency: receipt exists for py25-gtk DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: intltool DEBUG: Found Dependency: receipt exists for intltool DEBUG: Searching for dependency: p5-xml-parser DEBUG: Found Dependency: receipt exists for p5-xml-parser DEBUG: Searching for dependency: gtk2 DEBUG: Found Dependency: receipt exists for gtk2 DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: gtk-doc DEBUG: Found Dependency: receipt exists for gtk-doc DEBUG: Executing org.macports.main (gimp2) DEBUG: Skipping completed org.macports.fetch (gimp2) DEBUG: Skipping completed org.macports.checksum (gimp2) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (gimp2) DEBUG: Skipping completed org.macports.patch (gimp2) DEBUG: Skipping completed org.macports.configure (gimp2) ---> Building gimp2 DEBUG: Executing org.macports.build (gimp2) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.7" && /usr/bin/make -j2 all' /usr/bin/make all-recursive Making all in m4macros make[2]: Nothing to be done for `all'. Making all in tools Making all in pdbgen make[3]: Nothing to be done for `all-am'. Making all in cursors make[2]: Nothing to be done for `all'. Making all in themes Making all in Default Making all in images Making all in preferences make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. make[4]: Nothing to be done for `all-am'. Making all in Small make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. Making all in po make[2]: Nothing to be done for `all'. Making all in po-libgimp make[2]: Nothing to be done for `all'. Making all in po-plug-ins make[2]: Nothing to be done for `all'. Making all in po-python make[2]: Nothing to be done for `all'. Making all in po-script-fu make[2]: Nothing to be done for `all'. Making all in po-tips make[2]: Nothing to be done for `all'. Making all in data Making all in brushes make[3]: Nothing to be done for `all'. Making all in environ make[3]: Nothing to be done for `all'. Making all in gradients make[3]: Nothing to be done for `all'. Making all in images make[3]: Nothing to be done for `all'. Making all in interpreters make[3]: Nothing to be done for `all'. Making all in palettes make[3]: Nothing to be done for `all'. Making all in patterns make[3]: Nothing to be done for `all'. Making all in tips make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. Making all in desktop make[2]: Nothing to be done for `all'. Making all in menus make[2]: Nothing to be done for `all'. Making all in libgimpbase /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\" -DDATADIR=\""/opt/local/share/gimp/2.0"\" -DLOCALEDIR=\""/opt/local/share/locale"\" -DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\" -DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF .deps/gimpcpuaccel.Tpo -c -o gimpcpuaccel.lo gimpcpuaccel.c /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\" -DDATADIR=\""/opt/local/share/gimp/2.0"\" -DLOCALEDIR=\""/opt/local/share/locale"\" -DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\" -DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF .deps/gimpprotocol.Tpo -c -o gimpprotocol.lo gimpprotocol.c libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\" -DDATADIR=\"/opt/local/share/gimp/2.0\" -DLOCALEDIR=\"/opt/local/share/locale\" -DPLUGINDIR=\"/opt/local/lib/gimp/2.0\" -DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF .deps/gimpprotocol.Tpo -c gimpprotocol.c -fno-common -DPIC -o .libs/gimpprotocol.o libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\" -DDATADIR=\"/opt/local/share/gimp/2.0\" -DLOCALEDIR=\"/opt/local/share/locale\" -DPLUGINDIR=\"/opt/local/lib/gimp/2.0\" -DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF .deps/gimpcpuaccel.Tpo -c gimpcpuaccel.c -fno-common -DPIC -o .libs/gimpcpuaccel.o /var/tmpccjKuyvi.s:125:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:126:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:127:suffix or operands invalid for `pop' /var/tmpccjKuyvi.s:130:suffix or operands invalid for `push' /var/tmpccjKuyvi.s:131:suffix or operands invalid for `popf' /var/tmpccjKuyvi.s:132:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:133:suffix or operands invalid for `pop' /var/tmpccjKuyvi.s:134:suffix or operands invalid for `popf' make[2]: * [gimpcpuaccel.lo] Error 1 make[2]: * Waiting for unfinished jobs.... mv -f .deps/gimpprotocol.Tpo .deps/gimpprotocol.Plo make[1]: * [all-recursive] Error 1 make: * [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.7" && /usr/bin/make -j2 all " returned error 2 Command output: make[3]: Nothing to be done for `all'. Making all in palettes make[3]: Nothing to be done for `all'. Making all in patterns make[3]: Nothing to be done for `all'. Making all in tips make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. Making all in desktop make[2]: Nothing to be done for `all'. Making all in menus make[2]: Nothing to be done for `all'. Making all in libgimpbase /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\" -DDATADIR=\""/opt/local/share/gimp/2.0"\" -DLOCALEDIR=\""/opt/local/share/locale"\" -DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\" -DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF .deps/gimpcpuaccel.Tpo -c -o gimpcpuaccel.lo gimpcpuaccel.c /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\" -DDATADIR=\""/opt/local/share/gimp/2.0"\" -DLOCALEDIR=\""/opt/local/share/locale"\" -DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\" -DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF .deps/gimpprotocol.Tpo -c -o gimpprotocol.lo gimpprotocol.c libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\" -DDATADIR=\"/opt/local/share/gimp/2.0\" -DLOCALEDIR=\"/opt/local/share/locale\" -DPLUGINDIR=\"/opt/local/lib/gimp/2.0\" -DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF .deps/gimpprotocol.Tpo -c gimpprotocol.c -fno-common -DPIC -o .libs/gimpprotocol.o libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\" -DDATADIR=\"/opt/local/share/gimp/2.0\" -DLOCALEDIR=\"/opt/local/share/locale\" -DPLUGINDIR=\"/opt/local/lib/gimp/2.0\" -DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF .deps/gimpcpuaccel.Tpo -c gimpcpuaccel.c -fno-common -DPIC -o .libs/gimpcpuaccel.o /var/tmpccjKuyvi.s:125:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:126:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:127:suffix or operands invalid for `pop' /var/tmpccjKuyvi.s:130:suffix or operands invalid for `push' /var/tmpccjKuyvi.s:131:suffix or operands invalid for `popf' /var/tmpccjKuyvi.s:132:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:133:suffix or operands invalid for `pop' /var/tmpccjKuyvi.s:134:suffix or operands invalid for `popf' make[2]: * [gimpcpuaccel.lo] Error 1 make[2]: * Waiting for unfinished jobs.... mv -f .deps/gimpprotocol.Tpo .deps/gimpprotocol.Plo make[1]: * [all-recursive] Error 1 make: * [all] Error 2

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gimp2/work/gimp-2.6.7" && /usr/bin/make -j2 all " returned error 2 Command output: make[3]: Nothing to be done for `all'. Making all in palettes make[3]: Nothing to be done for `all'. Making all in patterns make[3]: Nothing to be done for `all'. Making all in tips make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. Making all in desktop make[2]: Nothing to be done for `all'. Making all in menus make[2]: Nothing to be done for `all'. Making all in libgimpbase /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\" -DDATADIR=\""/opt/local/share/gimp/2.0"\" -DLOCALEDIR=\""/opt/local/share/locale"\" -DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\" -DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF .deps/gimpcpuaccel.Tpo -c -o gimpcpuaccel.lo gimpcpuaccel.c /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\""/opt/local"\" -DGIMPDIR=\"".gimp-2.6"\" -DDATADIR=\""/opt/local/share/gimp/2.0"\" -DLOCALEDIR=\""/opt/local/share/locale"\" -DPLUGINDIR=\""/opt/local/lib/gimp/2.0"\" -DSYSCONFDIR=\""/opt/local/etc/gimp/2.0"\" -DGIMP_PACKAGE=\""gimp"\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF .deps/gimpprotocol.Tpo -c -o gimpprotocol.lo gimpprotocol.c libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\" -DDATADIR=\"/opt/local/share/gimp/2.0\" -DLOCALEDIR=\"/opt/local/share/locale\" -DPLUGINDIR=\"/opt/local/lib/gimp/2.0\" -DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpprotocol.lo -MD -MP -MF .deps/gimpprotocol.Tpo -c gimpprotocol.c -fno-common -DPIC -o .libs/gimpprotocol.o libtool: compile: /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I.. -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include -DPREFIX=\"/opt/local\" -DGIMPDIR=\".gimp-2.6\" -DDATADIR=\"/opt/local/share/gimp/2.0\" -DLOCALEDIR=\"/opt/local/share/locale\" -DPLUGINDIR=\"/opt/local/lib/gimp/2.0\" -DSYSCONFDIR=\"/opt/local/etc/gimp/2.0\" -DGIMP_PACKAGE=\"gimp\" -DGIMP_DATA_VERSION=\"2.0\" -DGIMP_SYSCONF_VERSION=\"2.0\" -DGIMP_PLUGIN_VERSION=\"2.0\" -DG_LOG_DOMAIN=\"LibGimpBase\" -I/opt/local/include -DGIMP_DISABLE_DEPRECATED -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE -O2 -arch x86_64 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT gimpcpuaccel.lo -MD -MP -MF .deps/gimpcpuaccel.Tpo -c gimpcpuaccel.c -fno-common -DPIC -o .libs/gimpcpuaccel.o /var/tmpccjKuyvi.s:125:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:126:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:127:suffix or operands invalid for `pop' /var/tmpccjKuyvi.s:130:suffix or operands invalid for `push' /var/tmpccjKuyvi.s:131:suffix or operands invalid for `popf' /var/tmpccjKuyvi.s:132:suffix or operands invalid for `pushf' /var/tmpccjKuyvi.s:133:suffix or operands invalid for `pop' /var/tmpccjKuyvi.s:134:suffix or operands invalid for `popf' make[2]: * [gimpcpuaccel.lo] Error 1 make[2]: * Waiting for unfinished jobs.... mv -f .deps/gimpprotocol.Tpo .deps/gimpprotocol.Plo make[1]: * [all-recursive] Error 1 make: * [all] Error 2

while executing

"command_exec build"

(procedure "portbuild::build_main" line 9) invoked from within

"$procedure $targetname" Warning: the following items did not execute (for gimp2): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: gimp2 gtkimageview Error: Status 1 encountered during processing.