Opened 14 years ago
Last modified 14 years ago
#23534 closed defect
winetricks-20091213_0 installation checksum error — at Version 1
| Reported by: | drberry@… | Owned by: | ryandesign@… |
|---|---|---|---|
| Priority: | Normal | Milestone: | |
| Component: | ports | Version: | 1.8.2 |
| Keywords: | Cc: | ||
| Port: | winetricks |
Description (last modified by jmroot (Joshua Root))
Checksum error when trying to install winetricks with sudo port -vd install winetricks. Output below.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/winetricks
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/winetricks
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port winetricks.
DEBUG: Requested variant i386 is not provided by port winetricks.
DEBUG: Requested variant macosx is not provided by port winetricks.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xmessage
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xmessage 1.0.3_0 exists in the ports tree
DEBUG: xmessage 1.0.3_0 is the latest installed
DEBUG: xmessage 1.0.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xmessage
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xmessage.
DEBUG: Requested variant i386 is not provided by port xmessage.
DEBUG: Requested variant macosx is not provided by port xmessage.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1 is the latest installed
DEBUG: pkgconfig 0.23_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
DEBUG: xorg-libXaw 1.0.7_0 is the latest installed
DEBUG: xorg-libXaw 1.0.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
DEBUG: xorg-libsm 1.1.1_0 is the latest installed
DEBUG: xorg-libsm 1.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libsm.
DEBUG: Requested variant i386 is not provided by port xorg-libsm.
DEBUG: Requested variant macosx is not provided by port xorg-libsm.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
DEBUG: xorg-xtrans 1.2.5_0 is the latest installed
DEBUG: xorg-xtrans 1.2.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
DEBUG: xorg-libice 1.0.6_0 is the latest installed
DEBUG: xorg-libice 1.0.6_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libice.
DEBUG: Requested variant i386 is not provided by port xorg-libice.
DEBUG: Requested variant macosx is not provided by port xorg-libice.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0 is the latest installed
DEBUG: xorg-xproto 7.0.16_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.1_0 is the latest installed
DEBUG: xorg-libXext 1.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.3_0 is the latest installed
DEBUG: xorg-libX11 1.3.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree
DEBUG: xorg-util-macros 1.5.0_0 is the latest installed
DEBUG: xorg-util-macros 1.5.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros 1.5.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed
DEBUG: xorg-bigreqsproto 1.1.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed
DEBUG: xorg-xcmiscproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0 is the latest installed
DEBUG: xorg-xextproto 7.1.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed
DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0 is the latest installed
DEBUG: xorg-inputproto 2.0_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0 is the latest installed
DEBUG: xorg-libXau 1.0.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0 is the latest installed
DEBUG: xorg-kbproto 1.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXmu 1.0.5_0 is the latest installed
DEBUG: xorg-libXmu 1.0.5_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
DEBUG: xorg-libXt 1.0.7_1 is the latest installed
DEBUG: xorg-libXt 1.0.7_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXt.
DEBUG: Requested variant i386 is not provided by port xorg-libXt.
DEBUG: Requested variant macosx is not provided by port xorg-libXt.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_1 exists in the ports tree
DEBUG: autoconf 2.65_1 is the latest installed
DEBUG: autoconf 2.65_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0 is the latest installed
DEBUG: perl5 5.8.9_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3 is the latest installed
DEBUG: perl5.8 5.8.9_3 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0 is the latest installed
DEBUG: m4 1.4.13_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1 is the latest installed
DEBUG: help2man 1.37.1_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2 is the latest installed
DEBUG: p5-locale-gettext 1.05_2 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4 is the latest installed
DEBUG: gettext 0.17_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0 is the latest installed
DEBUG: libiconv 1.13.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0 is the latest installed
DEBUG: gperf 3.0.4_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 is the latest installed
DEBUG: ncurses 5.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 is the latest installed
DEBUG: ncursesw 5.7_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0 is the latest installed
DEBUG: expat 2.0.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0 is the latest installed
DEBUG: automake 1.11.1_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant i386 is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_0 exists in the ports tree
DEBUG: libtool 2.2.6b_0 is the latest installed
DEBUG: libtool 2.2.6b_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant i386 is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xpm 3.5.8_0 exists in the ports tree
DEBUG: xpm 3.5.8_0 is the latest installed
DEBUG: xpm 3.5.8_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xpm.
DEBUG: Requested variant i386 is not provided by port xpm.
DEBUG: Requested variant macosx is not provided by port xpm.
DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
DEBUG: No need to upgrade! xmessage 1.0.3_0 >= xmessage 1.0.3_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/cabextract
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cabextract 1.2_0 exists in the ports tree
DEBUG: cabextract 1.2_0 is the latest installed
DEBUG: cabextract 1.2_0 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/cabextract
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port cabextract.
DEBUG: Requested variant i386 is not provided by port cabextract.
DEBUG: Requested variant macosx is not provided by port cabextract.
DEBUG: No need to upgrade! cabextract 1.2_0 >= cabextract 1.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8l_0 exists in the ports tree
DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
DEBUG: openssl 0.9.8l_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_4 exists in the ports tree
DEBUG: zlib 1.2.3_4 is the latest installed
DEBUG: zlib 1.2.3_4 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl 7.19.7_1 exists in the ports tree
DEBUG: curl 7.19.7_1 +ssl is the latest installed
DEBUG: curl 7.19.7_1 +ssl is active
DEBUG: Merging existing variants ssl into variants
DEBUG: new fully merged portvariants: ssl +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port curl.
DEBUG: Requested variant i386 is not provided by port curl.
DEBUG: Requested variant macosx is not provided by port curl.
DEBUG: Executing variant ssl provides ssl
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: curl-ca-bundle 7.19.7_1 exists in the ports tree
DEBUG: curl-ca-bundle 7.19.7_1 is the latest installed
DEBUG: curl-ca-bundle 7.19.7_1 is active
DEBUG: Merging existing variants into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port curl-ca-bundle.
DEBUG: Requested variant i386 is not provided by port curl-ca-bundle.
DEBUG: Requested variant macosx is not provided by port curl-ca-bundle.
DEBUG: No need to upgrade! curl-ca-bundle 7.19.7_1 >= curl-ca-bundle 7.19.7_1
DEBUG: No need to upgrade! curl 7.19.7_1 >= curl 7.19.7_1
---> Computing dependencies for winetricks
DEBUG: Searching for dependency: xmessage
DEBUG: Found Dependency: receipt exists for xmessage
DEBUG: Searching for dependency: wine
DEBUG: Didn't find receipt, going to depspec regex for: wine
DEBUG: Found Dependency: path: /opt/local/bin filename: wine regex: ^wine$
DEBUG: Searching for dependency: cabextract
DEBUG: Found Dependency: receipt exists for cabextract
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Searching for dependency: curl
DEBUG: Found Dependency: receipt exists for curl
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: Executing org.macports.main (winetricks)
DEBUG: Skipping completed org.macports.fetch (winetricks)
---> Verifying checksum(s) for winetricks
DEBUG: Executing org.macports.checksum (winetricks)
---> Checksumming winetricks
Error: Checksum (md5) mismatch for winetricks
Portfile checksum: winetricks md5 c849459ad55fa0da933696f1132eb85f
Distfile checksum: winetricks md5 d0d5b3bff0d984ffced28d90522543e2
Error: Checksum (sha1) mismatch for winetricks
Portfile checksum: winetricks sha1 ebb5aed33c68159ef305ed4be252cade9c37a3d9
Distfile checksum: winetricks sha1 2f1c5067c4bf095a15b8e397693ebb6d95c00a24
Error: Checksum (rmd160) mismatch for winetricks
Portfile checksum: winetricks rmd160 b134008c95d1c4fd00cd26c0b948df8f6cb8eaaf
Distfile checksum: winetricks rmd160 f7671581dcecb465effa7d91f55bcec310548eab
The correct checksum line may be:
checksums md5 d0d5b3bff0d984ffced28d90522543e2 \
sha1 2f1c5067c4bf095a15b8e397693ebb6d95c00a24 \
rmd160 f7671581dcecb465effa7d91f55bcec310548eab
Error: Target org.macports.checksum returned: Unable to verify file checksums
DEBUG: Backtrace: Unable to verify file checksums
while executing
"$procedure $targetname"
Warning: the following items did not execute (for winetricks): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
Change History (2)
Changed 14 years ago by drberry@…
comment:1 Changed 14 years ago by jmroot (Joshua Root)
| Description: | modified (diff) |
|---|---|
| Keywords: | winetricks checksum removed |
| Owner: | changed from macports-tickets@… to ryandesign@… |
Please remember to preview and use WikiFormatting, and cc the maintainer. As per the FAQ, you need to indicate which mirror your file was downloaded from.
Note: See
TracTickets for help on using
tickets.
Error output