arm-none-linux-gnueabi-gcc fails

[ncharles@…]

I'm trying to install arm-none-linux-gnueabi-gcc and it fails. I do have makeinfo installed through and it's a warning so I'm not sure if that's a spurious message or not.

[nathan@berlin:~]$ sudo port -d install arm-none-linux-gnueabi-gcc DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-gcc DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-gcc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port arm-none-linux-gnueabi-gcc. DEBUG: Requested variant i386 is not provided by port arm-none-linux-gnueabi-gcc. DEBUG: Requested variant macosx is not provided by port arm-none-linux-gnueabi-gcc. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-runtime DEBUG: epoch: in tree: 0 installed: 0 DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 exists in the ports tree DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 is the latest installed DEBUG: arm-none-linux-gnueabi-runtime cs2005q3.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-runtime DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port arm-none-linux-gnueabi-runtime. DEBUG: Requested variant i386 is not provided by port arm-none-linux-gnueabi-runtime. DEBUG: Requested variant macosx is not provided by port arm-none-linux-gnueabi-runtime. DEBUG: No need to upgrade! arm-none-linux-gnueabi-runtime cs2005q3.2_0 >= arm-none-linux-gnueabi-runtime cs2005q3.2_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18_0 exists in the ports tree DEBUG: gettext 0.18_0 is the latest installed DEBUG: gettext 0.18_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.18_0 >= gettext 0.18_0 ---> Computing dependencies for arm-none-linux-gnueabi-gcc DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port arm-none-linux-gnueabi-binutils. DEBUG: Requested variant i386 is not provided by port arm-none-linux-gnueabi-binutils. DEBUG: Requested variant macosx is not provided by port arm-none-linux-gnueabi-binutils. DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils DEBUG: Searching for dependency: arm-none-linux-gnueabi-binutils DEBUG: Didn't find receipt, going to depspec regex for: arm-none-linux-gnueabi-binutils DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/arm-none-linux-gnueabi-binutils DEBUG: Searching for dependency: arm-none-linux-gnueabi-runtime DEBUG: Found Dependency: receipt exists for arm-none-linux-gnueabi-runtime DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Executing org.macports.main (arm-none-linux-gnueabi-binutils) DEBUG: Skipping completed org.macports.fetch (arm-none-linux-gnueabi-binutils) DEBUG: Skipping completed org.macports.checksum (arm-none-linux-gnueabi-binutils) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (arm-none-linux-gnueabi-binutils) DEBUG: Skipping completed org.macports.patch (arm-none-linux-gnueabi-binutils) DEBUG: Skipping completed org.macports.configure (arm-none-linux-gnueabi-binutils) ---> Building arm-none-linux-gnueabi-binutils DEBUG: Executing org.macports.build (arm-none-linux-gnueabi-binutils) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" && /usr/bin/make -j2 all' make[1]: Nothing to be done for `all-target'. make[2]: Nothing to be done for `all'. make[3]: Nothing to be done for `all'. Making info in doc restore=: && backupdir=".am$$" && \

amcwd=pwd && cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc && \ rm -rf $backupdir && mkdir $backupdir && \ for f in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info-[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info-[0-9][0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.i[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.i[0-9][0-9]; do \

if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \

done; \ cd "$amcwd"; \ if /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/missing makeinfo --split-size=5000000 --split-size=5000000 -I /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc \

-o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.texinfo; \

then \

rc=0; \ cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc; \

else \

rc=$?; \ cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc && \ $restore $backupdir/* echo ".//opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info" | sed 's|[^/]*$||'; \

fi; \ rm -rf $backupdir; exit $rc

WARNING: `makeinfo' is missing on your system. You should only need it if

you modified a .texi' or .texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy `make' (AIX, DU, IRIX). You might want to install the `Texinfo' package or the `GNU make' package. Grab either from any GNU archive site.

make[3]: * opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/binutils-2.17pre/bfd/doc/arm-none-linux-gnueabi-bfd.info Error 1 Making info in po make[3]: Nothing to be done for `info'. make[3]: Nothing to be done for `info-am'. make[2]: * [info-recursive] Error 1 make[1]: * [all-bfd] Error 2 make: * [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" && /usr/bin/make -j2 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_arm-none-linux-gnueabi-binutils/work/build" && /usr/bin/make -j2 all " returned error 2

while executing

"command_exec build"

(procedure "portbuild::build_main" line 9) invoked from within

"$procedure $targetname" Warning: the following items did not execute (for arm-none-linux-gnueabi-binutils): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: arm-none-linux-gnueabi-binutils Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>