install dsniff on a MAC os x 10.6

[mxl1016@…]

localhost:~ melody$ cat /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/main.log version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libnids 1.23_2 exists in the ports tree :debug:main libnids 1.23_2 is the latest installed :debug:main libnids 1.23_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libnids 1.23_2 >= libnids 1.23_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpcap 1.1.1_0 exists in the ports tree :debug:main libpcap 1.0.0_1 is the latest installed :debug:main libpcap 1.0.0_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_libpcap/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap/work :debug:main Starting logging for libpcap :debug:destroot Starting logging for libpcap :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libnet11 1.1.4_0 exists in the ports tree :debug:clean libnet11 1.1.4_0 is the latest installed :debug:clean libnet11 1.1.4_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11 :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0 :debug:clean epoch: in tree: 1 installed: 1 :debug:clean openssl 1.0.0a_0 exists in the ports tree :debug:clean openssl 0.9.8n_0 +darwin is the latest installed :debug:clean openssl 0.9.8n_0 +darwin is active :debug:clean Merging existing variants '+darwin' into variants :debug:clean new fully merged portvariants: darwin + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean Requested variant darwin is not provided by port openssl. :debug:clean epoch: in tree: 0 installed: 0 :debug:clean zlib 1.2.5_0 exists in the ports tree :debug:clean zlib 1.2.5_0 is the latest installed :debug:clean zlib 1.2.5_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_openssl/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl/work :debug:clean Starting logging for openssl :debug:destroot Starting logging for openssl :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXmu 1.0.5_0 exists in the ports tree :debug:clean xorg-libXmu 1.0.5_0 is the latest installed :debug:clean xorg-libXmu 1.0.5_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXext 1.1.2_0 exists in the ports tree :debug:clean xorg-libXext 1.1.1_0 is the latest installed :debug:clean xorg-libXext 1.1.1_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean epoch: in tree: 0 installed: 0 :debug:clean pkgconfig 0.25_0 exists in the ports tree :debug:clean pkgconfig 0.23_1 is the latest installed :debug:clean pkgconfig 0.23_1 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig/work :debug:clean Starting logging for pkgconfig :debug:destroot Starting logging for pkgconfig :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libX11 1.3.4_0 exists in the ports tree :debug:clean xorg-libX11 1.3.3_0 is the latest installed :debug:clean xorg-libX11 1.3.3_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-util-macros 1.9.0_0 exists in the ports tree :debug:clean xorg-util-macros 1.7.0_0 is the latest installed :debug:clean xorg-util-macros 1.7.0_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-util-macros/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros/work :debug:clean Starting logging for xorg-util-macros :debug:destroot Starting logging for xorg-util-macros :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xtrans 1.2.5_0 exists in the ports tree :debug:clean xorg-xtrans 1.2.5_0 is the latest installed :debug:clean xorg-xtrans 1.2.5_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-bigreqsproto 1.1.0_0 exists in the ports tree :debug:clean xorg-bigreqsproto 1.1.0_0 is the latest installed :debug:clean xorg-bigreqsproto 1.1.0_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xcmiscproto 1.2.0_0 exists in the ports tree :debug:clean xorg-xcmiscproto 1.2.0_0 is the latest installed :debug:clean xorg-xcmiscproto 1.2.0_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xextproto 7.1.1_0 exists in the ports tree :debug:clean xorg-xextproto 7.1.1_0 is the latest installed :debug:clean xorg-xextproto 7.1.1_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree :debug:clean xorg-xf86bigfontproto 1.2.0_0 is the latest installed :debug:clean xorg-xf86bigfontproto 1.2.0_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-inputproto 2.0_0 exists in the ports tree :debug:clean xorg-inputproto 2.0_0 is the latest installed :debug:clean xorg-inputproto 2.0_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXdmcp 1.0.3_0 exists in the ports tree :debug:clean xorg-libXdmcp 1.0.3_0 is the latest installed :debug:clean xorg-libXdmcp 1.0.3_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXau 1.0.5_0 exists in the ports tree :debug:clean xorg-libXau 1.0.5_0 is the latest installed :debug:clean xorg-libXau 1.0.5_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-xproto 7.0.17_0 exists in the ports tree :debug:clean xorg-xproto 7.0.16_0 is the latest installed :debug:clean xorg-xproto 7.0.16_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xproto/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto/work :debug:clean Starting logging for xorg-xproto :debug:destroot Starting logging for xorg-xproto :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-kbproto 1.0.4_0 exists in the ports tree :debug:clean xorg-kbproto 1.0.4_0 is the latest installed :debug:clean xorg-kbproto 1.0.4_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean only one arch supported, so not adding the default universal variant :debug:clean No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 :debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libX11/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11/work :debug:clean Starting logging for xorg-libX11 :debug:destroot Starting logging for xorg-libX11 :debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-libXext/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext/work :debug:clean Starting logging for xorg-libXext :debug:destroot Starting logging for xorg-libXext :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libXt 1.0.8_0 exists in the ports tree :debug:clean xorg-libXt 1.0.8_0 is the latest installed :debug:clean xorg-libXt 1.0.8_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libsm 1.1.1_0 exists in the ports tree :debug:clean xorg-libsm 1.1.1_0 is the latest installed :debug:clean xorg-libsm 1.1.1_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean xorg-libice 1.0.6_0 exists in the ports tree :debug:clean xorg-libice 1.0.6_0 is the latest installed :debug:clean xorg-libice 1.0.6_0 is active :debug:clean Merging existing variants into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice :debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 :msg:clean ---> Computing dependencies for dsniff:info:clean .:debug:clean Searching for dependency: libnids :debug:clean Found Dependency: receipt exists for libnids :debug:clean Searching for dependency: libpcap :debug:clean Found Dependency: receipt exists for libpcap :debug:clean Searching for dependency: openssl :debug:clean Found Dependency: receipt exists for openssl :debug:clean Searching for dependency: xorg-libXmu :debug:clean Found Dependency: receipt exists for xorg-libXmu :msg:clean :debug:main Executing org.macports.main (dsniff) :debug:main Skipping completed org.macports.fetch (dsniff) :debug:main Skipping completed org.macports.checksum (dsniff) :debug:main Skipping completed org.macports.extract (dsniff) :debug:main Skipping completed org.macports.patch (dsniff) :debug:main Skipping completed org.macports.configure (dsniff) :msg:main ---> Building dsniff :debug:build build phase started at Mon Jul 12 15:55:37 CST 2010 :debug:build Executing org.macports.build (dsniff) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/work/dsniff-2.3" && /usr/bin/make -j2 all' :info:build /usr/bin/gcc-4.2 -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./arpspoof.c :info:build /usr/bin/gcc-4.2 -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./dnsspoof.c :info:build ./arpspoof.c:25: warning: 'struct ether_addr' declared inside parameter list :info:build ./arpspoof.c:25: warning: its scope is only this definition or declaration, which is probably not what you want :info:build ./arpspoof.c:26: warning: 'struct ether_addr' declared inside parameter list :info:build ./arpspoof.c: In function 'arp_send': :info:build ./arpspoof.c:49: warning: passing argument 1 of 'libnet_get_hwaddr' from incompatible pointer type :info:build ./arpspoof.c:49: error: too many arguments to function 'libnet_get_hwaddr' :info:build ./arpspoof.c:60: warning: passing argument 6 of 'libnet_build_ethernet' from incompatible pointer type :info:build ./arpspoof.c:60: error: too few arguments to function 'libnet_build_ethernet' :info:build ./arpspoof.c:64: error: 'ETH_H' undeclared (first use in this function) :info:build ./arpspoof.c:64: error: (Each undeclared identifier is reported only once :info:build ./arpspoof.c:64: error: for each function it appears in.) :info:build ./arpspoof.c:64: error: too few arguments to function 'libnet_build_arp' :info:build ./dnsspoof.c: In function 'dns_init': :info:build ./dnsspoof.c:95: warning: assignment makes pointer from integer without a cast :info:build ./arpspoof.c:67: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type :info:build ./arpspoof.c:71: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type :info:build ./arpspoof.c:73: warning: format '%s' expects type 'char *', but argument 4 has type 'int' :info:build ./arpspoof.c:73: warning: format '%s' expects type 'char *', but argument 5 has type 'int' :info:build ./arpspoof.c:77: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type :info:build ./arpspoof.c:78: warning: format '%s' expects type 'char *', but argument 4 has type 'int' :info:build ./arpspoof.c:80: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type :info:build ./arpspoof.c: In function 'arp_find': :info:build ./arpspoof.c:114: warning: passing argument 2 of 'arp_cache_lookup' from incompatible pointer type :info:build ./arpspoof.c: In function 'main': :info:build ./arpspoof.c:181: warning: assignment makes pointer from integer without a cast :info:build ./dnsspoof.c: In function 'dns_spoof': :info:build ./dnsspoof.c:191: error: dereferencing pointer to incomplete type :info:build ./dnsspoof.c:213: error: 'IP_H' undeclared (first use in this function) :info:build ./dnsspoof.c:213: error: (Each undeclared identifier is reported only once :info:build ./dnsspoof.c:213: error: for each function it appears in.) :info:build ./dnsspoof.c:213: error: 'UDP_H' undeclared (first use in this function) :info:build ./dnsspoof.c:236: error: 'PRu16' undeclared (first use in this function) :info:build ./dnsspoof.c:237: error: dereferencing pointer to incomplete type :info:build ./dnsspoof.c:238: error: dereferencing pointer to incomplete type :info:build ./dnsspoof.c:241: warning: passing argument 3 of 'libnet_build_udp' makes integer from pointer without a cast :info:build ./dnsspoof.c:241: error: too few arguments to function 'libnet_build_udp' :info:build ./dnsspoof.c:252: warning: passing argument 1 of 'libnet_do_checksum' from incompatible pointer type :info:build ./dnsspoof.c:252: warning: passing argument 2 of 'libnet_do_checksum' makes pointer from integer without a cast :info:build ./dnsspoof.c:252: error: too few arguments to function 'libnet_do_checksum' :info:build ./dnsspoof.c:258: error: dereferencing pointer to incomplete type :info:build ./dnsspoof.c:259: error: dereferencing pointer to incomplete type :info:build make: * [arpspoof.o] Error 1 :info:build make: * Waiting for unfinished jobs.... :info:build ./dnsspoof.c:260: warning: format '%s' expects type 'char *', but argument 3 has type 'int' :info:build ./dnsspoof.c:260: warning: format '%s' expects type 'char *', but argument 5 has type 'int' :info:build ./dnsspoof.c: In function 'main': :info:build ./dnsspoof.c:304: warning: format '%s' expects type 'char *', but argument 6 has type 'int' :info:build ./dnsspoof.c:316: error: too few arguments to function 'libnet_seed_prand' :info:build make: * [dnsspoof.o] Error 1 :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/work/dsniff-2.3" && /usr/bin/make -j2 all " returned error 2 :error:build Target org.macports.build returned: shell command failed :debug:build Backtrace: shell command failed

while executing

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" :info:build Warning: the following items did not execute (for dsniff): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for dsniff is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff/main.log localhost:~ melody$