Opened 12 years ago

Closed 12 years ago

Last modified 12 years ago

#36453 closed defect (fixed)

gnuradio-core: error: unknown directive .version "01.01"

Reported by: oolaluwe@… Owned by: michaelld (Michael Dickens)
Priority: Normal Milestone:
Component: ports Version: 2.1.2
Keywords: clang Cc: edrisedo@…, ryandesign (Ryan Carsten Schmidt)
Port: gnuradio-core

Description (last modified by ryandesign (Ryan Carsten Schmidt))

I tried to install gnuradio and i got the following errors:

Error: org.macports.build for port gnuradio-core returned: command execution failed
Error: Failed to install gnuradio-core

Error: The following dependencies were not installed: gnuradio-atsc gnuradio-core gnuradio-audio-jack jack libsamplerate libsndfile flac gnuradio-audio-osx gnuradio-audio-portaudio portaudio gnuradio-companion gnuradio-wxgui py26-opengl py26-opengl-accelerate py26-pil py26-tkinter gnuradio-cvsd-vocoder gnuradio-examples gnuradio-gpio usrp sdcc29 gnuradio-gsm-fr-vocoder gnuradio-msdd6000 gnuradio-noaa gnuradio-pager gnuradio-qtgui py26-pyqt4 py26-sip qt4-mac libmng qwtplot3d gnuradio-radar-mono gnuradio-radio-astronomy gnuradio-sounder gnuradio-trellis gnuradio-usrp gnuradio-utils gnuradio-video-sdl libsdl 

Attachments (1)

main.log (650.2 KB) - added by oolaluwe@… 12 years ago.

Download all attachments as: .zip

Change History (9)

comment:1 Changed 12 years ago by ryandesign (Ryan Carsten Schmidt)

Cc: oolaluwe@… removed
Description: modified (diff)
Milestone: MacPorts Future

Please attach the main.log file.

comment:2 Changed 12 years ago by ryandesign (Ryan Carsten Schmidt)

Owner: changed from macports-tickets@… to michaelld@…
Port: gnuradio-core added
Summary: Error: The following dependencies were not installedgnuradio-core: build failed

Changed 12 years ago by oolaluwe@…

Attachment: main.log added

comment:3 Changed 12 years ago by michaelld (Michael Dickens)

The actual error is found in the logfile:

:info:build libtool: compile:  /usr/bin/clang -DHAVE_CONFIG_H [snip] -pipe -O2 -arch x86_64 -MT float_dotprod_3dnow.lo -MD -MP -MF .deps/float_dotprod_3dnow.Tpo -c float_dotprod_3dnow.S  -fno-common -DPIC -o .libs/float_dotprod_3dnow.o
:info:build float_dotprod_3dnow.Sfloat_dotprod_sse.S::57:257:2: error: unknown directive: error: unknown directive
:info:build  .version "01.01"
:info:build  ^
:info:build 
:info:build  .version "01.01"
:info:build  ^
:info:build make[6]: *** [float_dotprod_3dnow.lo] Error 1

Older versions of GNU Radio do not compile with clang; this issue has been fixed only as of the latest release (3.6.2). I you require GNU Radio and this older version is OK, then "sudo port clean ..." your GNU Radio port installs and try again appending "configure.compiler=apple-gcc-4.2" (or, some other compiler that is not clang) to the "sudo port install ..." command line.

I am really hoping to update the GNU Radio ports to the latest release in the coming couple of weeks, now that pretty much everything has calmed down with qt4-mac, PyQt4, and octave-devel. Doing this update has been on my queue for a long time, and represents most of the open tickets that require my attention.

comment:4 in reply to:  3 ; Changed 12 years ago by oolaluwe@…

I am not used to command line interface that much. Could you please break it down as if your are talking to a novice. I think a step by procedure will work better for me please. Appreciate your effort!!!

Replying to michaelld@…:

The actual error is found in the logfile:

:info:build libtool: compile:  /usr/bin/clang -DHAVE_CONFIG_H [snip] -pipe -O2 -arch x86_64 -MT float_dotprod_3dnow.lo -MD -MP -MF .deps/float_dotprod_3dnow.Tpo -c float_dotprod_3dnow.S  -fno-common -DPIC -o .libs/float_dotprod_3dnow.o
:info:build float_dotprod_3dnow.Sfloat_dotprod_sse.S::57:257:2: error: unknown directive: error: unknown directive
:info:build  .version "01.01"
:info:build  ^
:info:build 
:info:build  .version "01.01"
:info:build  ^
:info:build make[6]: *** [float_dotprod_3dnow.lo] Error 1

Older versions of GNU Radio do not compile with clang; this issue has been fixed only as of the latest release (3.6.2). I you require GNU Radio and this older version is OK, then "sudo port clean ..." your GNU Radio port installs and try again appending "configure.compiler=apple-gcc-4.2" (or, some other compiler that is not clang) to the "sudo port install ..." command line.

I am really hoping to update the GNU Radio ports to the latest release in the coming couple of weeks, now that pretty much everything has calmed down with qt4-mac, PyQt4, and octave-devel. Doing this update has been on my queue for a long time, and represents most of the open tickets that require my attention.

comment:5 in reply to:  4 Changed 12 years ago by ryandesign (Ryan Carsten Schmidt)

Cc: edrisedo@… added
Keywords: clang added
Summary: gnuradio-core: build failedgnuradio-core: error: unknown directive .version "01.01"

Has duplicate #36593.

comment:6 Changed 12 years ago by ryandesign (Ryan Carsten Schmidt)

Cc: ryandesign@… added
Resolution: fixed
Status: newclosed

comment:7 Changed 12 years ago by edrisedo@…

First my full path to /gnuradio-core is: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/science/gnuradio-core

is this right?

How do I get write permissions for ./gnuradio-core/Portfile and ./gnuradio-core/files/patch-configure.diff

Thanks for your help

Version 0, edited 12 years ago by edrisedo@… (next)

comment:8 Changed 12 years ago by michaelld (Michael Dickens)

If what you're trying to do is just update to this new checkin, you should do

sudo port clean gnuradio-core
sudo port selfupdate
sudo port install gnuradio-core

If you want to edit the Portfile and/or patches for your own purposes, then you'll need admin access so-as to "sudo chmod" or "sudo edit" them. You can get to the Portfile's directory via (e.g.; I tend to use "pushd" instead of "cd" so that I can get back to where I was easily [via "popd"]):

cd `port dir gnuradio-core`
Note: See TracTickets for help on using tickets.