fsv configuration fails

[dominique.cunin@…]

Since I updated MacPort 2.3.3 fsv won't configure…

Here's the log produced by MacPort :

version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gtkglarea 1.2.3_3 exists in the ports tree :debug:main gtkglarea 1.2.3_3 is the latest installed :debug:main gtkglarea 1.2.3_3 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/gtkglarea :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! gtkglarea 1.2.3_3 >= gtkglarea 1.2.3_3 :debug:main epoch: in tree: 1 installed: 1 :debug:main mesa 10.4.7_0 exists in the ports tree :debug:main mesa 10.4.7_0 +osmesa+python27 is the latest installed :debug:main mesa 10.4.7_0 +osmesa+python27 is active :debug:main Merging existing variants '+osmesa+python27' into variants :debug:main new fully merged portvariants: osmesa + python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/mesa :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant python27 provides python27 :debug:main Executing variant osmesa provides osmesa :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! mesa 10.4.7_0 >= mesa 10.4.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-glproto 1.4.17_0 exists in the ports tree :debug:main xorg-glproto 1.4.17_0 is the latest installed :debug:main xorg-glproto 1.4.17_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-glproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-glproto 1.4.17_0 >= xorg-glproto 1.4.17_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-dri2proto 2.8_0 exists in the ports tree :debug:main xorg-dri2proto 2.8_0 is the latest installed :debug:main xorg-dri2proto 2.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-dri2proto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-dri2proto 2.8_0 >= xorg-dri2proto 2.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libxcb 1.11_1 exists in the ports tree :debug:main xorg-libxcb 1.11_1 +python27 is the latest installed :debug:main xorg-libxcb 1.11_1 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant python27 provides python27 :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libxcb 1.11_1 >= xorg-libxcb 1.11_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXau 1.0.8_0 exists in the ports tree :debug:main xorg-libXau 1.0.8_0 is the latest installed :debug:main xorg-libXau 1.0.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXau 1.0.8_0 >= xorg-libXau 1.0.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xproto 7.0.27_0 exists in the ports tree :debug:main xorg-xproto 7.0.27_0 is the latest installed :debug:main xorg-xproto 7.0.27_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-xproto 7.0.27_0 >= xorg-xproto 7.0.27_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdmcp 1.1.2_0 exists in the ports tree :debug:main xorg-libXdmcp 1.1.2_0 is the latest installed :debug:main xorg-libXdmcp 1.1.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXdmcp 1.1.2_0 >= xorg-libXdmcp 1.1.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-proto 1.11_1 exists in the ports tree :debug:main xorg-xcb-proto 1.11_1 +python27 is the latest installed :debug:main xorg-xcb-proto 1.11_1 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Executing variant python27 provides python27 :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-xcb-proto 1.11_1 >= xorg-xcb-proto 1.11_1 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.9_0 exists in the ports tree :debug:main python27 2.7.9_0 is the latest installed :debug:main python27 2.7.9_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Sourcing PortGroup select 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! python27 2.7.9_0 >= python27 2.7.9_0 :debug:main epoch: in tree: 2 installed: 2 :debug:main gettext 0.19.4_0 exists in the ports tree :debug:main gettext 0.19.4_0 is the latest installed :debug:main gettext 0.19.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Sourcing PortGroup compiler_blacklist_versions 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Sourcing PortGroup muniversal 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main compiler clang 503.0.40 not blacklisted because it doesn't match {clang < 211.10.1} :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! gettext 0.19.4_0 >= gettext 0.19.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Sourcing PortGroup muniversal 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_2 exists in the ports tree :debug:main ncurses 5.9_2 is the latest installed :debug:main ncurses 5.9_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.8_0 exists in the ports tree :debug:main zlib 1.2.8_0 is the latest installed :debug:main zlib 1.2.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Sourcing PortGroup xcodeversion 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! zlib 1.2.8_0 >= zlib 1.2.8_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.2a_0 exists in the ports tree :debug:main openssl 1.0.2a_0 is the latest installed :debug:main openssl 1.0.2a_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Sourcing PortGroup muniversal 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! openssl 1.0.2a_0 >= openssl 1.0.2a_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.8.8.3_0 exists in the ports tree :debug:main sqlite3 3.8.8.3_0 is the latest installed :debug:main sqlite3 3.8.8.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! sqlite3 3.8.8.3_0 >= sqlite3 3.8.8.3_0 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20140620-3.1_0 exists in the ports tree :debug:main libedit 20140620-3.1_0 is the latest installed :debug:main libedit 20140620-3.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Sourcing PortGroup muniversal 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! libedit 20140620-3.1_0 >= libedit 20140620-3.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db48 4.8.30_4 exists in the ports tree :debug:main db48 4.8.30_4 is the latest installed :debug:main db48 4.8.30_4 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db48 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Sourcing PortGroup muniversal 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Sourcing PortGroup select 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! db48 4.8.30_4 >= db48 4.8.30_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main db_select 0.1_2 exists in the ports tree :debug:main db_select 0.1_2 is the latest installed :debug:main db_select 0.1_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/db_select :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Sourcing PortGroup select 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! db_select 0.1_2 >= db_select 0.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_4 exists in the ports tree :debug:main python_select 0.3_4 is the latest installed :debug:main python_select 0.3_4 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main Sourcing PortGroup select 1.0 from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! python_select 0.3_4 >= python_select 0.3_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.9.2_2 exists in the ports tree :debug:main libxml2 2.9.2_2 is the latest installed :debug:main libxml2 2.9.2_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! libxml2 2.9.2_2 >= libxml2 2.9.2_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main xz 5.2.1_0 exists in the ports tree :debug:main xz 5.2.1_0 is the latest installed :debug:main xz 5.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xz 5.2.1_0 >= xz 5.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed :debug:main xorg-libpthread-stubs 0.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libX11 1.6.3_0 exists in the ports tree :debug:main xorg-libX11 1.6.3_0 is the latest installed :debug:main xorg-libX11 1.6.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libX11 1.6.3_0 >= xorg-libX11 1.6.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree :debug:main xorg-kbproto 1.0.6_0 is the latest installed :debug:main xorg-kbproto 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXext 1.3.3_0 exists in the ports tree :debug:main xorg-libXext 1.3.3_0 is the latest installed :debug:main xorg-libXext 1.3.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXext 1.3.3_0 >= xorg-libXext 1.3.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xextproto 7.3.0_0 exists in the ports tree :debug:main xorg-xextproto 7.3.0_0 is the latest installed :debug:main xorg-xextproto 7.3.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-xextproto 7.3.0_0 >= xorg-xextproto 7.3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdamage 1.1.4_0 exists in the ports tree :debug:main xorg-libXdamage 1.1.4_0 is the latest installed :debug:main xorg-libXdamage 1.1.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdamage :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXdamage 1.1.4_0 >= xorg-libXdamage 1.1.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXfixes 5.0.1_0 exists in the ports tree :debug:main xorg-libXfixes 5.0.1_0 is the latest installed :debug:main xorg-libXfixes 5.0.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXfixes :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXfixes 5.0.1_0 >= xorg-libXfixes 5.0.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree :debug:main xorg-fixesproto 5.0_0 is the latest installed :debug:main xorg-fixesproto 5.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-fixesproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree :debug:main xorg-damageproto 1.2.1_0 is the latest installed :debug:main xorg-damageproto 1.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-damageproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXi 1.7.4_0 exists in the ports tree :debug:main xorg-libXi 1.7.4_0 is the latest installed :debug:main xorg-libXi 1.7.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXi :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXi 1.7.4_0 >= xorg-libXi 1.7.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-inputproto 2.3.1_0 exists in the ports tree :debug:main xorg-inputproto 2.3.1_0 is the latest installed :debug:main xorg-inputproto 2.3.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-inputproto :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main only one arch supported, so not adding the default universal variant :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-inputproto 2.3.1_0 >= xorg-inputproto 2.3.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXmu 1.1.2_0 exists in the ports tree :debug:main xorg-libXmu 1.1.2_0 is the latest installed :debug:main xorg-libXmu 1.1.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXmu :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXmu 1.1.2_0 >= xorg-libXmu 1.1.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXt 1.1.4_0 exists in the ports tree :debug:main xorg-libXt 1.1.4_0 is the latest installed :debug:main xorg-libXt 1.1.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libXt 1.1.4_0 >= xorg-libXt 1.1.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libsm 1.2.1_0 exists in the ports tree :debug:main xorg-libsm 1.2.1_0 is the latest installed :debug:main xorg-libsm 1.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libice 1.0.9_0 exists in the ports tree :debug:main xorg-libice 1.0.9_0 is the latest installed :debug:main xorg-libice 1.0.9_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! xorg-libice 1.0.9_0 >= xorg-libice 1.0.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gtk1 1.2.10_10 exists in the ports tree :debug:main gtk1 1.2.10_10 is the latest installed :debug:main gtk1 1.2.10_10 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/gtk1 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! gtk1 1.2.10_10 >= gtk1 1.2.10_10 :debug:main epoch: in tree: 0 installed: 0 :debug:main glib1 1.2.10_7 exists in the ports tree :debug:main glib1 1.2.10_7 is the latest installed :debug:main glib1 1.2.10_7 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib1 :debug:main OS darwin/12.6.0 (Mac OS X 10.8) arch i386 :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Running callback portconfigure::add_automatic_compiler_dependencies :debug:main Finished running callback portconfigure::add_automatic_compiler_dependencies :debug:main Running callback portbuild::add_automatic_buildsystem_dependencies :debug:main Finished running callback portbuild::add_automatic_buildsystem_dependencies :debug:main No need to upgrade! glib1 1.2.10_7 >= glib1 1.2.10_7 :msg:main ---> Computing dependencies for fsv:info:main .:debug:main fsv has no conflicts :debug:main Searching for dependency: gtkglarea :debug:main Found Dependency: receipt exists for gtkglarea :msg:main :debug:main Executing org.macports.main (fsv) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 503 :debug:archivefetch archivefetch phase started at Wed Apr 1 11:51:16 CEST 2015 :msg:archivefetch ---> Fetching archive for fsv :debug:archivefetch Executing org.macports.archivefetch (fsv) :debug:archivefetch euid/egid changed to: 0/0 :debug:archivefetch chowned /opt/local/var/macports/incoming to macports :debug:archivefetch euid/egid changed to: 503/501 :info:archivefetch ---> fsv-0.9_1.darwin_12.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified :msg:archivefetch ---> Attempting to fetch fsv-0.9_1.darwin_12.x86_64.tbz2 from ​http://mse.uk.packages.macports.org/sites/packages.macports.org/fsv :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :msg:archivefetch ---> Attempting to fetch fsv-0.9_1.darwin_12.x86_64.tbz2 from ​http://lil.fr.packages.macports.org/fsv :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :msg:archivefetch ---> Attempting to fetch fsv-0.9_1.darwin_12.x86_64.tbz2 from ​http://nue.de.packages.macports.org/macports/packages/fsv :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :debug:archivefetch Privilege de-escalation not attempted as not running as root. :debug:fetch fetch phase started at Wed Apr 1 11:51:17 CEST 2015 :notice:fetch ---> Fetching distfiles for fsv :debug:fetch Executing org.macports.fetch (fsv) :debug:fetch Privilege de-escalation not attempted as not running as root. :debug:checksum checksum phase started at Wed Apr 1 11:51:17 CEST 2015 :notice:checksum ---> Verifying checksums for fsv :debug:checksum Executing org.macports.checksum (fsv) :info:checksum ---> Checksumming fsv-0.9.tar.gz :debug:checksum Calculated (md5) is 0f68e27d638c45dbdf4f66fa19f811f0 :debug:checksum Correct (md5) checksum for fsv-0.9.tar.gz :debug:checksum Privilege de-escalation not attempted as not running as root. :debug:extract extract phase started at Wed Apr 1 11:51:17 CEST 2015 :notice:extract ---> Extracting fsv :debug:extract Executing org.macports.extract (fsv) :info:extract ---> Extracting fsv-0.9.tar.gz :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/fsv/fsv-0.9.tar.gz' :debug:extract Environment: CC_PRINT_OPTIONS='YES' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work/.CC_PRINT_OPTIONS' CPATH='/opt/local/include' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/fsv/fsv-0.9.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/fsv/fsv-0.9.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - :debug:extract euid/egid changed to: 0/0 :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work to macports :debug:extract euid/egid changed to: 503/501 :debug:extract Privilege de-escalation not attempted as not running as root. :debug:patch patch phase started at Wed Apr 1 11:51:17 CEST 2015 :debug:patch Executing org.macports.patch (fsv) :debug:patch Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Wed Apr 1 11:51:17 CEST 2015 :notice:configure ---> Configuring fsv :debug:configure Using compiler 'Xcode Clang' :debug:configure Executing org.macports.configure (fsv) :debug:configure Environment: CC='/usr/bin/clang' CC_PRINT_OPTIONS='YES' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work/.CC_PRINT_OPTIONS' CFLAGS='-pipe -Os -arch x86_64' CPATH='/opt/local/include' CPPFLAGS='-I/opt/local/include' CXX='/usr/bin/clang++' CXXFLAGS='-pipe -Os -arch x86_64 -stdlib=libstdc++' F77FLAGS='-m64' F90FLAGS='-pipe -Os -m64' FCFLAGS='-pipe -Os -m64' FFLAGS='-pipe -Os' INSTALL='/usr/bin/install -c' LDFLAGS='-L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' OBJC='/usr/bin/clang' OBJCFLAGS='-pipe -Os -arch x86_64' OBJCXX='/usr/bin/clang++' OBJCXXFLAGS='-pipe -Os -arch x86_64 -stdlib=libstdc++' CFPREFERENCES_AVOID_DAEMON='1' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work/fsv-0.9" && ./configure --prefix=/opt/local --with-gtkgl-prefix=/opt/local --with-included-gettext --disable-nls' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work/fsv-0.9" && ./configure --prefix=/opt/local --with-gtkgl-prefix=/opt/local --with-included-gettext --disable-nls :info:configure creating cache ./config.cache :info:configure checking for a BSD compatible install... /usr/bin/install -c :info:configure checking whether build environment is sane... yes :info:configure checking whether make sets ${MAKE}... yes :info:configure checking for working aclocal... found :info:configure checking for working autoconf... found :info:configure checking for working automake... found :info:configure checking for working autoheader... found :info:configure checking for working makeinfo... found :info:configure checking for gcc... /usr/bin/clang :info:configure checking whether the C compiler (/usr/bin/clang -pipe -Os -arch x86_64 -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64) works... yes :info:configure checking whether the C compiler (/usr/bin/clang -pipe -Os -arch x86_64 -L/opt/local/lib -Wl,-headerpad_max_install_names -arch x86_64) is a cross-compiler... no :info:configure checking whether we are using GNU C... yes :info:configure checking whether /usr/bin/clang accepts -g... yes :info:configure checking how to run the C preprocessor... /usr/bin/clang -E :info:configure checking for ranlib... ranlib :info:configure checking for POSIXized ISC... no :info:configure checking for dirent.h that defines DIR... yes :info:configure checking for opendir in -ldir... no :info:configure checking for ANSI C header files... yes :info:configure checking whether time.h and sys/time.h may both be included... yes :info:configure checking for strings.h... yes :info:configure checking for sys/time.h... yes :info:configure checking for unistd.h... yes :info:configure checking for working const... yes :info:configure checking for mode_t... yes :info:configure checking for uid_t in sys/types.h... yes :info:configure checking for pid_t... yes :info:configure checking for size_t... yes :info:configure checking for comparison_fn_t... no :info:configure checking for st_blocks in struct stat... yes :info:configure checking whether struct tm is in sys/time.h or time.h... time.h :info:configure checking for working alloca.h... yes :info:configure checking for alloca... yes :info:configure checking for working fnmatch... yes :info:configure checking for strftime... yes :info:configure checking for getcwd... yes :info:configure checking for gettimeofday... yes :info:configure checking for mktime... yes :info:configure checking for strcspn... yes :info:configure checking for strdup... yes :info:configure checking for strspn... yes :info:configure checking for strtod... yes :info:configure checking for strtoul... yes :info:configure checking for scandir... yes :info:configure checking for inline... inline :info:configure checking for off_t... yes :info:configure checking for unistd.h... (cached) yes :info:configure checking for getpagesize... yes :info:configure checking for working mmap... yes :info:configure checking for argz.h... no :info:configure checking for limits.h... yes :info:configure checking for locale.h... yes :info:configure checking for nl_types.h... yes :info:configure checking for malloc.h... no :info:configure checking for string.h... yes :info:configure checking for unistd.h... (cached) yes :info:configure checking for sys/param.h... yes :info:configure checking for getcwd... (cached) yes :info:configure checking for munmap... yes :info:configure checking for putenv... yes :info:configure checking for setenv... yes :info:configure checking for setlocale... yes :info:configure checking for strchr... yes :info:configure checking for strcasecmp... yes :info:configure checking for strdup... (cached) yes :info:configure checking for argz_count... no :info:configure checking for argz_stringify... no :info:configure checking for argz_next... no :info:configure checking for stpcpy... yes :info:configure checking for LC_MESSAGES... yes :info:configure checking whether NLS is requested... no :info:configure checking for gtk-config... /opt/local/bin/gtk-config :info:configure checking for GTK - version >= 1.2.1... yes :info:configure checking for glBegin in -lMesaGL... no :info:configure checking for glBegin in -lGL... yes :info:configure checking for gtk_gl_area_new in -lgtkgl... no :info:configure configure: error: Cannot find gtkglarea :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work/fsv-0.9" && ./configure --prefix=/opt/local --with-gtkgl-prefix=/opt/local --with-included-gettext --disable-nls :info:configure Exit code: 1 :error:configure Failed to configure fsv, consult /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/work/fsv-0.9/config.log :error:configure org.macports.configure for port fsv returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed

while executing

"portconfigure::configure_main org.macports.configure"

("eval" body line 1) invoked from within

"eval $procedure $targetname" :info:configure Warning: targets not executed for fsv: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Please see the log file for port fsv for details:

/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_x11_fsv/fsv/main.log

[dominique.cunin@…]

fsv configuration fails - log