| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.26_0 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.26_0 is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.26_0 +universal is active |
|---|
| 6 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: universal + |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main Executing variant universal provides universal |
|---|
| 16 | :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 |
|---|
| 17 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 18 | :debug:main glib2 2.28.8_0 exists in the ports tree |
|---|
| 19 | :debug:main glib2 2.28.8_0 is the latest installed |
|---|
| 20 | :debug:main glib2 2.28.8_0 +universal is active |
|---|
| 21 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 22 | :debug:main new fully merged portvariants: universal + |
|---|
| 23 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 |
|---|
| 24 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 25 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 28 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 29 | :debug:main adding the default universal variant |
|---|
| 30 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 31 | :debug:main Executing variant universal provides universal |
|---|
| 32 | :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 |
|---|
| 33 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 34 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 35 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 36 | :debug:main gettext 0.18.1.1_2 +universal is active |
|---|
| 37 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 38 | :debug:main new fully merged portvariants: universal + |
|---|
| 39 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 40 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 41 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 44 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 45 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 46 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 47 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 48 | :debug:main Executing variant universal provides universal |
|---|
| 49 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 50 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 51 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 52 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 53 | :debug:main libiconv 1.13.1_0 +universal is active |
|---|
| 54 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 55 | :debug:main new fully merged portvariants: universal + |
|---|
| 56 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 57 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 58 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 59 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 60 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 61 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 62 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 63 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 64 | :debug:main Executing variant universal provides universal |
|---|
| 65 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 66 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 67 | :debug:main ncurses 5.9_0 exists in the ports tree |
|---|
| 68 | :debug:main ncurses 5.9_0 is the latest installed |
|---|
| 69 | :debug:main ncurses 5.9_0 +universal is active |
|---|
| 70 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 71 | :debug:main new fully merged portvariants: universal + |
|---|
| 72 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 73 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 74 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 75 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 76 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 77 | :debug:main adding the default universal variant |
|---|
| 78 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 79 | :debug:main Executing variant universal provides universal |
|---|
| 80 | :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0 |
|---|
| 81 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 82 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 83 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 84 | :debug:main expat 2.0.1_1 +universal is active |
|---|
| 85 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 86 | :debug:main new fully merged portvariants: universal + |
|---|
| 87 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 88 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 89 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 90 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 91 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 92 | :debug:main adding the default universal variant |
|---|
| 93 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 94 | :debug:main Executing variant universal provides universal |
|---|
| 95 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 96 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 97 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 98 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 99 | :debug:main zlib 1.2.5_0 +universal is active |
|---|
| 100 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 101 | :debug:main new fully merged portvariants: universal + |
|---|
| 102 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 103 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 104 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 106 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 107 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 108 | :debug:main adding the default universal variant |
|---|
| 109 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 110 | :debug:main Executing variant universal provides universal |
|---|
| 111 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 112 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 113 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 114 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 115 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 116 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 117 | :debug:main new fully merged portvariants: perl5_12 + |
|---|
| 118 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 119 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 120 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 122 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 123 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 124 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 125 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 126 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 127 | :debug:main perl5.12 5.12.3_1 exists in the ports tree |
|---|
| 128 | :debug:main perl5.12 5.12.3_1 is the latest installed |
|---|
| 129 | :debug:main perl5.12 5.12.3_1 +universal is active |
|---|
| 130 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 131 | :debug:main new fully merged portvariants: universal + |
|---|
| 132 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 |
|---|
| 133 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 134 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 135 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 136 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 137 | :debug:main adding the default universal variant |
|---|
| 138 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 139 | :debug:main Executing variant universal provides universal |
|---|
| 140 | :debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 |
|---|
| 141 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 142 | :debug:main xorg-libxcb 1.7_0 exists in the ports tree |
|---|
| 143 | :debug:main xorg-libxcb 1.7_0 +python27 is the latest installed |
|---|
| 144 | :debug:main xorg-libxcb 1.7_0 +python27+universal is active |
|---|
| 145 | :debug:main Merging existing variants '+python27+universal' into variants |
|---|
| 146 | :debug:main new fully merged portvariants: universal + python27 + |
|---|
| 147 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb |
|---|
| 148 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 149 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 150 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 151 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 152 | :debug:main adding the default universal variant |
|---|
| 153 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 154 | :debug:main Executing variant python27 provides python27 |
|---|
| 155 | :debug:main Executing variant universal provides universal |
|---|
| 156 | :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 |
|---|
| 157 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 158 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 159 | :debug:main xorg-libXau 1.0.6_0 is the latest installed |
|---|
| 160 | :debug:main xorg-libXau 1.0.6_0 +universal is active |
|---|
| 161 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 162 | :debug:main new fully merged portvariants: universal + |
|---|
| 163 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 164 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 165 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 166 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 168 | :debug:main adding the default universal variant |
|---|
| 169 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 170 | :debug:main Executing variant universal provides universal |
|---|
| 171 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 172 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 173 | :debug:main xorg-xproto 7.0.21_0 exists in the ports tree |
|---|
| 174 | :debug:main xorg-xproto 7.0.21_0 is the latest installed |
|---|
| 175 | :debug:main xorg-xproto 7.0.21_0 is active |
|---|
| 176 | :debug:main Merging existing variants '' into variants |
|---|
| 177 | :debug:main new fully merged portvariants: |
|---|
| 178 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 179 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 180 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 181 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 182 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 184 | :debug:main No need to upgrade! xorg-xproto 7.0.21_0 >= xorg-xproto 7.0.21_0 |
|---|
| 185 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 186 | :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree |
|---|
| 187 | :debug:main xorg-libXdmcp 1.1.0_0 is the latest installed |
|---|
| 188 | :debug:main xorg-libXdmcp 1.1.0_0 +universal is active |
|---|
| 189 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 190 | :debug:main new fully merged portvariants: universal + |
|---|
| 191 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 192 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 193 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 194 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 195 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 196 | :debug:main adding the default universal variant |
|---|
| 197 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 198 | :debug:main Executing variant universal provides universal |
|---|
| 199 | :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 |
|---|
| 200 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 201 | :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree |
|---|
| 202 | :debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed |
|---|
| 203 | :debug:main xorg-xcb-proto 1.6_0 +python27 is active |
|---|
| 204 | :debug:main Merging existing variants '+python27' into variants |
|---|
| 205 | :debug:main new fully merged portvariants: python27 + |
|---|
| 206 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto |
|---|
| 207 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 208 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 209 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 210 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 211 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 212 | :debug:main Executing variant python27 provides python27 |
|---|
| 213 | :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 |
|---|
| 214 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 215 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 216 | :debug:main libxml2 2.7.8_0 is the latest installed |
|---|
| 217 | :debug:main libxml2 2.7.8_0 +universal is active |
|---|
| 218 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 219 | :debug:main new fully merged portvariants: universal + |
|---|
| 220 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 221 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 222 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 223 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 224 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 225 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 226 | :debug:main adding the default universal variant |
|---|
| 227 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 228 | :debug:main Executing variant universal provides universal |
|---|
| 229 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 230 | :debug:main epoch: in tree: 2 installed: 2 |
|---|
| 231 | :debug:main python27 2.7.2_0 exists in the ports tree |
|---|
| 232 | :debug:main python27 2.7.2_0 is the latest installed |
|---|
| 233 | :debug:main python27 2.7.2_0 +universal is active |
|---|
| 234 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 235 | :debug:main new fully merged portvariants: universal + |
|---|
| 236 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 |
|---|
| 237 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 238 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 239 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 240 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 241 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 242 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 243 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 244 | :debug:main Executing variant universal provides universal |
|---|
| 245 | :debug:main No need to upgrade! python27 2.7.2_0 >= python27 2.7.2_0 |
|---|
| 246 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 247 | :debug:main openssl 1.0.0d_0 exists in the ports tree |
|---|
| 248 | :debug:main openssl 1.0.0d_0 is the latest installed |
|---|
| 249 | :debug:main openssl 1.0.0d_0 +universal is active |
|---|
| 250 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 251 | :debug:main new fully merged portvariants: universal + |
|---|
| 252 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 253 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 254 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 255 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 256 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 257 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 258 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 259 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 260 | :debug:main Executing variant universal provides universal |
|---|
| 261 | :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 |
|---|
| 262 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 263 | :debug:main sqlite3 3.7.7.1_0 exists in the ports tree |
|---|
| 264 | :debug:main sqlite3 3.7.7.1_0 is the latest installed |
|---|
| 265 | :debug:main sqlite3 3.7.7.1_0 +universal is active |
|---|
| 266 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 267 | :debug:main new fully merged portvariants: universal + |
|---|
| 268 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 269 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 270 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 271 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 272 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 273 | :debug:main adding the default universal variant |
|---|
| 274 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 275 | :debug:main Executing variant universal provides universal |
|---|
| 276 | :debug:main No need to upgrade! sqlite3 3.7.7.1_0 >= sqlite3 3.7.7.1_0 |
|---|
| 277 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 278 | :debug:main readline 6.2.000_0 exists in the ports tree |
|---|
| 279 | :debug:main readline 6.2.000_0 is the latest installed |
|---|
| 280 | :debug:main readline 6.2.000_0 +universal is active |
|---|
| 281 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 282 | :debug:main new fully merged portvariants: universal + |
|---|
| 283 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 284 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 285 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 286 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 287 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 288 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 289 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 290 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 291 | :debug:main Executing variant universal provides universal |
|---|
| 292 | :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 |
|---|
| 293 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 294 | :debug:main db46 4.6.21_6 exists in the ports tree |
|---|
| 295 | :debug:main db46 4.6.21_6 is the latest installed |
|---|
| 296 | :debug:main db46 4.6.21_6 +universal is active |
|---|
| 297 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 298 | :debug:main new fully merged portvariants: universal + |
|---|
| 299 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 300 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 301 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 302 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 303 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 304 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 305 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 306 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 307 | :debug:main Executing variant universal provides universal |
|---|
| 308 | :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 309 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 310 | :debug:main gdbm 1.8.3_3 exists in the ports tree |
|---|
| 311 | :debug:main gdbm 1.8.3_3 is the latest installed |
|---|
| 312 | :debug:main gdbm 1.8.3_3 +universal is active |
|---|
| 313 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 314 | :debug:main new fully merged portvariants: universal + |
|---|
| 315 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 316 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 317 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 318 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 319 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 320 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 321 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 322 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 323 | :debug:main Executing variant universal provides universal |
|---|
| 324 | :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 |
|---|
| 325 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 326 | :debug:main bzip2 1.0.6_0 exists in the ports tree |
|---|
| 327 | :debug:main bzip2 1.0.6_0 is the latest installed |
|---|
| 328 | :debug:main bzip2 1.0.6_0 +universal is active |
|---|
| 329 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 330 | :debug:main new fully merged portvariants: universal + |
|---|
| 331 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 332 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 333 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 334 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 335 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 336 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 337 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 338 | :debug:main Executing variant universal provides universal |
|---|
| 339 | :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 |
|---|
| 340 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 341 | :debug:main python_select 0.3_1 exists in the ports tree |
|---|
| 342 | :debug:main python_select 0.3_1 is the latest installed |
|---|
| 343 | :debug:main python_select 0.3_1 is active |
|---|
| 344 | :debug:main Merging existing variants '' into variants |
|---|
| 345 | :debug:main new fully merged portvariants: |
|---|
| 346 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select |
|---|
| 347 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 348 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 349 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 350 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 351 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 352 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 353 | :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 |
|---|
| 354 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 355 | :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 356 | :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 357 | :debug:main xorg-libpthread-stubs 0.3_0 is active |
|---|
| 358 | :debug:main Merging existing variants '' into variants |
|---|
| 359 | :debug:main new fully merged portvariants: |
|---|
| 360 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 361 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 362 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 363 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 364 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 365 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 366 | :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 367 | :msg:main ---> Computing dependencies for xorg-xcb-util:msg:main |
|---|
| 368 | :debug:main Searching for dependency: pkgconfig |
|---|
| 369 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 370 | :debug:main Searching for dependency: xorg-libxcb |
|---|
| 371 | :debug:main Found Dependency: receipt exists for xorg-libxcb |
|---|
| 372 | :debug:main Searching for dependency: xorg-xproto |
|---|
| 373 | :debug:main Found Dependency: receipt exists for xorg-xproto |
|---|
| 374 | :debug:main Executing org.macports.main (xorg-xcb-util) |
|---|
| 375 | :msg:main ---> Fetching xorg-xcb-util |
|---|
| 376 | :debug:fetch fetch phase started at Tue Jul 5 00:23:08 EDT 2011 |
|---|
| 377 | :debug:fetch Executing org.macports.fetch (xorg-xcb-util) |
|---|
| 378 | :msg:fetch ---> Verifying checksum(s) for xorg-xcb-util |
|---|
| 379 | :debug:checksum checksum phase started at Tue Jul 5 00:23:08 EDT 2011 |
|---|
| 380 | :debug:checksum Executing org.macports.checksum (xorg-xcb-util) |
|---|
| 381 | :info:checksum ---> Checksumming xcb-util-0.3.8.tar.bz2 |
|---|
| 382 | :debug:checksum Correct (md5) checksum for xcb-util-0.3.8.tar.bz2 |
|---|
| 383 | :debug:checksum Correct (sha1) checksum for xcb-util-0.3.8.tar.bz2 |
|---|
| 384 | :debug:checksum Correct (rmd160) checksum for xcb-util-0.3.8.tar.bz2 |
|---|
| 385 | :debug:checksum setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 386 | :msg:checksum ---> Extracting xorg-xcb-util |
|---|
| 387 | :debug:extract extract phase started at Tue Jul 5 00:23:08 EDT 2011 |
|---|
| 388 | :debug:extract Executing org.macports.extract (xorg-xcb-util) |
|---|
| 389 | :info:extract ---> Extracting xcb-util-0.3.8.tar.bz2 |
|---|
| 390 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/xorg-xcb-util/xcb-util-0.3.8.tar.bz2' |
|---|
| 391 | :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 392 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/xorg-xcb-util/xcb-util-0.3.8.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -' |
|---|
| 393 | :debug:patch patch phase started at Tue Jul 5 00:23:08 EDT 2011 |
|---|
| 394 | :debug:patch Executing org.macports.patch (xorg-xcb-util) |
|---|
| 395 | :msg:patch ---> Configuring xorg-xcb-util |
|---|
| 396 | :debug:patch Using compiler 'Mac OS X gcc 4.2' |
|---|
| 397 | :debug:configure configure phase started at Tue Jul 5 00:23:08 EDT 2011 |
|---|
| 398 | :debug:configure Executing org.macports.configure (xorg-xcb-util) |
|---|
| 399 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' |
|---|
| 400 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work/xcb-util-0.3.8" && ./configure --prefix=/opt/local' |
|---|
| 401 | :info:configure checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 402 | :info:configure checking whether build environment is sane... yes |
|---|
| 403 | :info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p |
|---|
| 404 | :info:configure checking for gawk... no |
|---|
| 405 | :info:configure checking for mawk... no |
|---|
| 406 | :info:configure checking for nawk... no |
|---|
| 407 | :info:configure checking for awk... awk |
|---|
| 408 | :info:configure checking whether make sets $(MAKE)... yes |
|---|
| 409 | :info:configure checking whether to enable maintainer-specific portions of Makefiles... no |
|---|
| 410 | :info:configure checking for m4 that supports -I option... /opt/local/bin/gm4 |
|---|
| 411 | :info:configure checking build system type... x86_64-apple-darwin10.8.0 |
|---|
| 412 | :info:configure checking host system type... x86_64-apple-darwin10.8.0 |
|---|
| 413 | :info:configure checking how to print strings... printf |
|---|
| 414 | :info:configure checking for style of include used by make... GNU |
|---|
| 415 | :info:configure checking for gcc... /usr/bin/gcc-4.2 |
|---|
| 416 | :info:configure checking whether the C compiler works... yes |
|---|
| 417 | :info:configure checking for C compiler default output file name... a.out |
|---|
| 418 | :info:configure checking for suffix of executables... |
|---|
| 419 | :info:configure checking whether we are cross compiling... no |
|---|
| 420 | :info:configure checking for suffix of object files... o |
|---|
| 421 | :info:configure checking whether we are using the GNU C compiler... yes |
|---|
| 422 | :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes |
|---|
| 423 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed |
|---|
| 424 | :info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3 |
|---|
| 425 | :info:configure checking for a sed that does not truncate output... /usr/bin/sed |
|---|
| 426 | :info:configure checking for grep that handles long lines and -e... /usr/bin/grep |
|---|
| 427 | :info:configure checking for egrep... /usr/bin/grep -E |
|---|
| 428 | :info:configure checking for fgrep... /usr/bin/grep -F |
|---|
| 429 | :info:configure checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
|---|
| 430 | :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
|---|
| 431 | :info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm |
|---|
| 432 | :info:configure checking the name lister (/usr/bin/nm) interface... BSD nm |
|---|
| 433 | :info:configure checking whether ln -s works... yes |
|---|
| 434 | :info:configure checking the maximum length of command line arguments... 196608 |
|---|
| 435 | :info:configure checking whether the shell understands some XSI constructs... yes |
|---|
| 436 | :info:configure checking whether the shell understands "+="... yes |
|---|
| 437 | :info:configure checking how to convert x86_64-apple-darwin10.8.0 file names to x86_64-apple-darwin10.8.0 format... func_convert_file_noop |
|---|
| 438 | :info:configure checking how to convert x86_64-apple-darwin10.8.0 file names to toolchain format... func_convert_file_noop |
|---|
| 439 | :info:configure checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r |
|---|
| 440 | :info:configure checking for objdump... no |
|---|
| 441 | :info:configure checking how to recognize dependent libraries... pass_all |
|---|
| 442 | :info:configure checking for dlltool... no |
|---|
| 443 | :info:configure checking how to associate runtime and link libraries... printf %s\n |
|---|
| 444 | :info:configure checking for ar... ar |
|---|
| 445 | :info:configure checking for archiver @FILE support... no |
|---|
| 446 | :info:configure checking for strip... strip |
|---|
| 447 | :info:configure checking for ranlib... ranlib |
|---|
| 448 | :info:configure checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok |
|---|
| 449 | :info:configure checking for sysroot... no |
|---|
| 450 | :info:configure checking for mt... no |
|---|
| 451 | :info:configure checking if : is a manifest tool... no |
|---|
| 452 | :info:configure checking for dsymutil... dsymutil |
|---|
| 453 | :info:configure checking for nmedit... nmedit |
|---|
| 454 | :info:configure checking for lipo... lipo |
|---|
| 455 | :info:configure checking for otool... otool |
|---|
| 456 | :info:configure checking for otool64... no |
|---|
| 457 | :info:configure checking for -single_module linker flag... yes |
|---|
| 458 | :info:configure checking for -exported_symbols_list linker flag... yes |
|---|
| 459 | :info:configure checking for -force_load linker flag... yes |
|---|
| 460 | :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E |
|---|
| 461 | :info:configure checking for ANSI C header files... yes |
|---|
| 462 | :info:configure checking for sys/types.h... yes |
|---|
| 463 | :info:configure checking for sys/stat.h... yes |
|---|
| 464 | :info:configure checking for stdlib.h... yes |
|---|
| 465 | :info:configure checking for string.h... yes |
|---|
| 466 | :info:configure checking for memory.h... yes |
|---|
| 467 | :info:configure checking for strings.h... yes |
|---|
| 468 | :info:configure checking for inttypes.h... yes |
|---|
| 469 | :info:configure checking for stdint.h... yes |
|---|
| 470 | :info:configure checking for unistd.h... yes |
|---|
| 471 | :info:configure checking for dlfcn.h... yes |
|---|
| 472 | :info:configure checking for objdir... .libs |
|---|
| 473 | :info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no |
|---|
| 474 | :info:configure checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common -DPIC |
|---|
| 475 | :info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC works... yes |
|---|
| 476 | :info:configure checking if /usr/bin/gcc-4.2 static flag -static works... no |
|---|
| 477 | :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes |
|---|
| 478 | :info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... (cached) yes |
|---|
| 479 | :info:configure checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 480 | :info:configure checking dynamic linker characteristics... darwin10.8.0 dyld |
|---|
| 481 | :info:configure checking how to hardcode library paths into programs... immediate |
|---|
| 482 | :info:configure checking whether stripping libraries is possible... yes |
|---|
| 483 | :info:configure checking if libtool supports shared libraries... yes |
|---|
| 484 | :info:configure checking whether to build shared libraries... yes |
|---|
| 485 | :info:configure checking whether to build static libraries... yes |
|---|
| 486 | :info:configure checking for pkg-config... /opt/local/bin/pkg-config |
|---|
| 487 | :info:configure checking pkg-config is at least version 0.9.0... yes |
|---|
| 488 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C99... -std=gnu99 |
|---|
| 489 | :info:configure checking for XCB... yes |
|---|
| 490 | :info:configure checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) awk |
|---|
| 491 | :info:configure yes |
|---|
| 492 | :info:configure checking whether to build developer documentation... yes |
|---|
| 493 | :info:configure checking for doxygen... no |
|---|
| 494 | :info:configure configure: WARNING: doxygen not found - documentation targets will be skipped |
|---|
| 495 | :info:configure checking for gperf... gperf |
|---|
| 496 | :info:configure checking for vasprintf... yes |
|---|
| 497 | :info:configure checking for ssize_t... yes |
|---|
| 498 | :info:configure checking for XPROTO... yes |
|---|
| 499 | :info:configure configure: creating ./config.status |
|---|
| 500 | :info:configure config.status: creating Makefile |
|---|
| 501 | :info:configure config.status: creating src/Makefile |
|---|
| 502 | :info:configure config.status: creating xcb-atom.pc |
|---|
| 503 | :info:configure config.status: creating xcb-aux.pc |
|---|
| 504 | :info:configure config.status: creating xcb-event.pc |
|---|
| 505 | :info:configure config.status: creating xcb-util.pc |
|---|
| 506 | :info:configure config.status: creating xcb_util_intro |
|---|
| 507 | :info:configure config.status: executing depfiles commands |
|---|
| 508 | :info:configure config.status: executing libtool commands |
|---|
| 509 | :msg:configure ---> Building xorg-xcb-util |
|---|
| 510 | :debug:build build phase started at Tue Jul 5 00:23:15 EDT 2011 |
|---|
| 511 | :debug:build Executing org.macports.build (xorg-xcb-util) |
|---|
| 512 | :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 513 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work/xcb-util-0.3.8" && /usr/bin/make -j2 all' |
|---|
| 514 | :info:build Making all in src |
|---|
| 515 | :info:build /opt/local/bin/gm4 -I. atoms.gperf.m4 >atoms.gperf |
|---|
| 516 | :info:build gperf --output-file atoms.c atoms.gperf |
|---|
| 517 | :info:build /usr/bin/make all-am |
|---|
| 518 | :info:build CC atoms.lo |
|---|
| 519 | :info:build CC event.lo |
|---|
| 520 | :info:build atoms.gperf:36: error: duplicate 'static' |
|---|
| 521 | :info:build atoms.gperf:38: warning: function declaration isn't a prototype |
|---|
| 522 | :info:build atoms.gperf: In function 'hash': |
|---|
| 523 | :info:build atoms.gperf:40: warning: old-style function definition |
|---|
| 524 | :info:build atoms.gperf: At top level: |
|---|
| 525 | :info:build atoms.gperf:243: warning: function declaration isn't a prototype |
|---|
| 526 | :info:build atoms.gperf: In function 'in_word_set': |
|---|
| 527 | :info:build atoms.gperf:245: warning: old-style function definition |
|---|
| 528 | :info:build make[2]: *** [atoms.lo] Error 1 |
|---|
| 529 | :info:build make[2]: *** Waiting for unfinished jobs.... |
|---|
| 530 | :info:build make[1]: *** [all] Error 2 |
|---|
| 531 | :info:build make: *** [all-recursive] Error 1 |
|---|
| 532 | :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/work/xcb-util-0.3.8" && /usr/bin/make -j2 all " returned error 2 |
|---|
| 533 | :error:build Target org.macports.build returned: shell command failed (see log for details) |
|---|
| 534 | :debug:build Backtrace: shell command failed (see log for details) |
|---|
| 535 | while executing |
|---|
| 536 | "command_exec build" |
|---|
| 537 | (procedure "portbuild::build_main" line 8) |
|---|
| 538 | invoked from within |
|---|
| 539 | "$procedure $targetname" |
|---|
| 540 | :info:build Warning: the following items did not execute (for xorg-xcb-util): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 541 | :notice:build Log for xorg-xcb-util is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xorg-xcb-util/main.log |
|---|
