UPDATE: libprelude

[usx303@…]

newest version is 0.9.17.2

[usx303@…]

Portifel patch

[mf2k (Frank Schima)]

Can you clarify please... just use the Portfile.2.diff attachment and ignore the 1st one?

[usx303@…]

Booth attachments are identical. I had network problems while uploading and ended up with this 2 uploaded files.

[mf2k (Frank Schima)]

I applied the patch and attempted to install but i get a checksum mismatch. Can you verify those please?

[usx303@…]

Sorry, i missed to fix download location (master_site). This should be set to

http://www.prelude-ids.com/download/releases/libprelude/

I'm going to clean up my ports and provide a new patch.

[usx303@…]

fixed Portfile patch

[usx303@…]

I've uploaded a new patch(Portfile-fixed.diff) against original Portfile. Now the download and installation should work properly.

[raimue (Rainer Müller)]

Just curious, why did you remove the --enable-openssl switch?

[raimue (Rainer Müller)]

Recreated the patch after I did a tab-to-spaces in r38287

[usx303@…]

The --enable-openssl switch is outdated. Libprelude requires and uses GnuTLS.
I attached the

./configure --help

output to confitrm this.

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-maintainer-mode  enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer
  --disable-dependency-tracking  speeds up one-time build
  --enable-dependency-tracking   do not reject slow dependency extractors
  --enable-static[=PKGS]  build static libraries [default=no]
  --enable-shared[=PKGS]  build shared libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-gtk-doc        use gtk-doc to build documentation default=no
  --disable-largefile     omit support for large files

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
  --with-pic              try to use only PIC/non-PIC objects [default=use
                          both]
  --with-tags[=TAGS]      include additional configurations [automatic]
  --with-system-ltdl[=PATH]
                          Use system provided libtool dynamic loader
                          [default=auto]
  --with-libgnutls-prefix=PFX
                          Prefix where libgnutls is installed (optional)
  --with-libgnutls-extra-prefix=PFX
                          Prefix where libgnutls-extra is installed (optional)
  --with-libgcrypt-prefix=PFX
                          prefix where LIBGCRYPT is installed (optional)
  --with-swig[=PATH]      Re-generate perl/python bindings sources
                          [default=auto]
  --with-perl[=PATH]      Enable support for perl binding [default=auto]
  --with-perl-installdirs=[site|vendor]
                          Specify where to install the Perl module
                          [default=site]
  --with-python[=PATH]    Enable support for python binding [default=auto]
  --without-included-regex
                          don't compile regex; this is the default on 32-bit
                          systems with recent-enough versions of the GNU C
                          Library (use with caution on other systems). On
                          systems with 64-bit ptrdiff_t and 32-bit int,
                          --with-included-regex is the default, in case regex
                          functions operate on very long strings (>2GB)
  --with-html-dir=PATH    path to installed docs

[raimue (Rainer Müller)]

Ok, just to make sure you did not delete it accidentally because you did not note that explicitely. I would also have believed you without seeing the ./configure --help output.

[ryandesign (Ryan Carsten Schmidt)]

Has duplicate #15984.

[mf2k (Frank Schima)]

I've downloaded both of the fixed patches but I cannot apply them without error. For example, I've tried the following:

1. sudo svn revert Portfile
2. sudo patch -p0 Portfile Portfile.diff
3. sudo patch -p0 Portfile Portfile-fixed.2.diff

But that fails for me. See below:

817fsmac:libprelude schimaf$ sudo svn revert Portfile
Reverted 'Portfile'
817fsmac:libprelude schimaf$ sudo patch -p0 Portfile Portfile.diff 
patching file Portfile
817fsmac:libprelude schimaf$ sudo patch -p0 Portfile Portfile-fixed.2.diff 
patching file Portfile
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] y
Hunk #1 FAILED at 3.
Hunk #2 FAILED at 16.
2 out of 2 hunks FAILED -- saving rejects to file Portfile.rej

Also, I've tried the following:

1. sudo svn revert Portfile
2. sudo patch -p0 Portfile Portfile-fixed.2.diff

But that fails for me too.

Can you perhaps just post a single updated diff file based on what is currently in svn?

[usx303@…]

This is a little patch chaos ;)
You just need to apply the last one(Portfile-fixed.2.diff). All others are obsolete.

[mf2k (Frank Schima)]

Thanks for the clarification. It doesn't seem to work for me:

817fsmac:libprelude schimaf$ sudo svn revert Portfile
Reverted 'Portfile'
817fsmac:libprelude schimaf$ sudo patch -p0 Portfile Portfile-fixed.2.diff 
patching file Portfile
Hunk #2 FAILED at 16.
1 out of 2 hunks FAILED -- saving rejects to file Portfile.rej

Am I using the patch command incorrectly?

[usx303@…]

Portfile patch

[usx303@…]

I'm not sure what's wrong, but I uploaded an other patch against SVN rev 38325.
Alternatively you could try

patch < Portfile3.diff

[mf2k (Frank Schima)]

I get the same problem as above both with using the syntax i used before and your suggested syntax. I will probably resort to manually applying the changes next. I'll get to it soon - hopefully tonight.

[raimue (Rainer Müller)]

As said, I did whitespace changes to the port in r38287. Both Portfile-fixed.2.diff and Portfile3.diff work for me.

[mf2k (Frank Schima)]

Raimue, you were right. My bad, I didn't have your changes. The patch works for me now. However, I encounter an error during activation:

Macintosh:~ frank$ sudo port install libprelude
--->  Fetching libprelude
--->  Verifying checksum(s) for libprelude
--->  Extracting libprelude
--->  Configuring libprelude
--->  Building libprelude with target all
--->  Staging libprelude into destroot
Warning: violation by /System
Warning: libprelude violates the layout of the ports-filesystems!
Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases!
--->  Installing libprelude @0.9.17.2_0
--->  Activating libprelude @0.9.17.2_0
Error: Target org.macports.activate returned: Image error: /System/Library/Perl/5.8.8/darwin-thread-multi-2level/perllocal.pod already exists and does not belong to a registered port.  Unable to activate port libprelude.
Error: Status 1 encountered during processing.

Perhaps perl needs to be added as a dependency?

[usx303@…]

Okay, to solve this problem i'm going to add a variant and dependencies for perl.

[usx303@…]

new Portfile patch with variants for python and perl

[usx303@…]

I've uploaded an new Portfile.diff (and replaced the old one).
Now there are 3 variants: python24, python25 and perl.

[mf2k (Frank Schima)]

Committed revision 38347. Thanks for the contribution!

[(none)]

Milestone Port Updates deleted