"port install rpm" failes

[borschel@…]

it appears, that, although successfully comleting the db3 make, the packages does not produce the later required db3/libdb-4.5.la

here is the debug output

sudo port -d install rpm
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/rpm
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/rpm
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port rpm.
DEBUG: Requested variant macosx is not provided by port rpm.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.0.000_2 exists in the ports tree
DEBUG: readline 6.0.000_2 +darwin is the latest installed
DEBUG: readline 6.0.000_2 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: popt 1.15_0 exists in the ports tree
DEBUG: popt 1.15_0  is the latest installed
DEBUG: popt 1.15_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port popt.
DEBUG: Requested variant i386 is not provided by port popt.
DEBUG: Requested variant macosx is not provided by port popt.
DEBUG: No need to upgrade! popt 1.15_0 >= popt 1.15_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.18_0 exists in the ports tree
DEBUG: sqlite3 3.6.18_0  is the latest installed
DEBUG: sqlite3 3.6.18_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant i386 is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: No need to upgrade! sqlite3 3.6.18_0 >= sqlite3 3.6.18_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/neon
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: neon 0.28.6_0 exists in the ports tree
DEBUG: neon 0.28.6_0  is the latest installed
DEBUG: neon 0.28.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/neon
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port neon.
DEBUG: Requested variant i386 is not provided by port neon.
DEBUG: Requested variant macosx is not provided by port neon.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8k_0 exists in the ports tree
DEBUG: openssl 0.9.8k_0 +darwin is the latest installed
DEBUG: openssl 0.9.8k_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_3 exists in the ports tree
DEBUG: zlib 1.2.3_3  is the latest installed
DEBUG: zlib 1.2.3_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0
DEBUG: No need to upgrade! neon 0.28.6_0 >= neon 0.28.6_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python24 2.4.6_4 exists in the ports tree
DEBUG: python24 2.4.6_4 +darwin+darwin_9+macosx is the latest installed
DEBUG: python24 2.4.6_4 +darwin+darwin_9+macosx is active
DEBUG: Merging existing variants darwin darwin_9 macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python24
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python24.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant darwin_9 provides darwin_9
DEBUG: No need to upgrade! python24 2.4.6_4 >= python24 2.4.6_4
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/beecrypt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: beecrypt 4.2.1_0 exists in the ports tree
DEBUG: beecrypt 4.2.1_0  is the latest installed
DEBUG: beecrypt 4.2.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/beecrypt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port beecrypt.
DEBUG: Requested variant i386 is not provided by port beecrypt.
DEBUG: Requested variant macosx is not provided by port beecrypt.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: icu 4.3.1_0 exists in the ports tree
DEBUG: icu 4.3.1_0  is the latest installed
DEBUG: icu 4.3.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port icu.
DEBUG: Requested variant i386 is not provided by port icu.
DEBUG: Requested variant macosx is not provided by port icu.
DEBUG: No need to upgrade! icu 4.3.1_0 >= icu 4.3.1_0
DEBUG: No need to upgrade! beecrypt 4.2.1_0 >= beecrypt 4.2.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gzip 1.3.12_0 exists in the ports tree
DEBUG: gzip 1.3.12_0  is the latest installed
DEBUG: gzip 1.3.12_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gzip.
DEBUG: Requested variant i386 is not provided by port gzip.
DEBUG: Requested variant macosx is not provided by port gzip.
DEBUG: No need to upgrade! gzip 1.3.12_0 >= gzip 1.3.12_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 9.8.0
DEBUG: Mac OS X Version: 10.5
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
--->  Computing dependencies for rpm
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: popt
DEBUG: Found Dependency: receipt exists for popt
DEBUG: Searching for dependency: sqlite3
DEBUG: Found Dependency: receipt exists for sqlite3
DEBUG: Searching for dependency: expat
DEBUG: Found Dependency: receipt exists for expat
DEBUG: Searching for dependency: neon
DEBUG: Found Dependency: receipt exists for neon
DEBUG: Searching for dependency: python24
DEBUG: Found Dependency: receipt exists for python24
DEBUG: Searching for dependency: perl5.8
DEBUG: Found Dependency: receipt exists for perl5.8
DEBUG: Searching for dependency: readline
DEBUG: Found Dependency: receipt exists for readline
DEBUG: Searching for dependency: beecrypt
DEBUG: Found Dependency: receipt exists for beecrypt
DEBUG: Searching for dependency: libiconv
DEBUG: Found Dependency: receipt exists for libiconv
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Searching for dependency: openssl
DEBUG: Found Dependency: receipt exists for openssl
DEBUG: Searching for dependency: gzip
DEBUG: Found Dependency: receipt exists for gzip
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: Executing org.macports.main (rpm)
DEBUG: Skipping completed org.macports.fetch (rpm)
DEBUG: Skipping completed org.macports.checksum (rpm)
DEBUG: Skipping completed org.macports.extract (rpm)
DEBUG: Skipping completed org.macports.patch (rpm)
DEBUG: Skipping completed org.macports.configure (rpm)
--->  Building rpm
DEBUG: Executing org.macports.build (rpm)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9" && /usr/bin/gnumake -j1 all'
/usr/bin/gnumake  all-recursive
Making all in po
gnumake[2]: Nothing to be done for `all'.
Making all in misc
gnumake[2]: Nothing to be done for `all'.
Making all in zlib
/usr/bin/gnumake  all-am
gnumake[3]: Nothing to be done for `all-am'.
Making all in file
/usr/bin/gnumake  all-recursive
Making all in src
/usr/bin/gnumake  all-am
gnumake[5]: Nothing to be done for `all-am'.
Making all in magic
gnumake[4]: Nothing to be done for `all'.
Making all in doc
gnumake[4]: Nothing to be done for `all'.
Making all in python
gnumake[4]: Nothing to be done for `all'.
gnumake[4]: Nothing to be done for `all-am'.
Making all in db3
gnumake[2]: Nothing to be done for `all'.
Making all in syck
Making all in lib
/usr/bin/gnumake  all-am
gnumake[4]: Nothing to be done for `all-am'.
gnumake[3]: Nothing to be done for `all-am'.
Making all in lua
gnumake[2]: Nothing to be done for `all'.
Making all in rpmio
gnumake[2]: Nothing to be done for `all'.
Making all in rpmdb
/usr/bin/gnumake  all-am
sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la > ../db3/libdb.la
/bin/sh: ../db3/libdb-4.5.la: No such file or directory
gnumake[3]: *** [../db3/libdb.la] Error 1
gnumake[2]: *** [all] Error 2
gnumake[1]: *** [all-recursive] Error 1
gnumake: *** [all] Error 2
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9" && /usr/bin/gnumake -j1 all " returned error 2
Command output: /usr/bin/gnumake  all-recursive
Making all in src
/usr/bin/gnumake  all-am
gnumake[5]: Nothing to be done for `all-am'.
Making all in magic
gnumake[4]: Nothing to be done for `all'.
Making all in doc
gnumake[4]: Nothing to be done for `all'.
Making all in python
gnumake[4]: Nothing to be done for `all'.
gnumake[4]: Nothing to be done for `all-am'.
Making all in db3
gnumake[2]: Nothing to be done for `all'.
Making all in syck
Making all in lib
/usr/bin/gnumake  all-am
gnumake[4]: Nothing to be done for `all-am'.
gnumake[3]: Nothing to be done for `all-am'.
Making all in lua
gnumake[2]: Nothing to be done for `all'.
Making all in rpmio
gnumake[2]: Nothing to be done for `all'.
Making all in rpmdb
/usr/bin/gnumake  all-am
sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la > ../db3/libdb.la
/bin/sh: ../db3/libdb-4.5.la: No such file or directory
gnumake[3]: *** [../db3/libdb.la] Error 1
gnumake[2]: *** [all] Error 2
gnumake[1]: *** [all-recursive] Error 1
gnumake: *** [all] Error 2

DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_sysutils_rpm/work/rpm-4.4.9" && /usr/bin/gnumake -j1 all " returned error 2
Command output: /usr/bin/gnumake  all-recursive
Making all in src
/usr/bin/gnumake  all-am
gnumake[5]: Nothing to be done for `all-am'.
Making all in magic
gnumake[4]: Nothing to be done for `all'.
Making all in doc
gnumake[4]: Nothing to be done for `all'.
Making all in python
gnumake[4]: Nothing to be done for `all'.
gnumake[4]: Nothing to be done for `all-am'.
Making all in db3
gnumake[2]: Nothing to be done for `all'.
Making all in syck
Making all in lib
/usr/bin/gnumake  all-am
gnumake[4]: Nothing to be done for `all-am'.
gnumake[3]: Nothing to be done for `all-am'.
Making all in lua
gnumake[2]: Nothing to be done for `all'.
Making all in rpmio
gnumake[2]: Nothing to be done for `all'.
Making all in rpmdb
/usr/bin/gnumake  all-am
sed -e"/^libdir=/s/^.*$/libdir=''/" < ../db3/libdb-4.5.la > ../db3/libdb.la
/bin/sh: ../db3/libdb-4.5.la: No such file or directory
gnumake[3]: *** [../db3/libdb.la] Error 1
gnumake[2]: *** [all] Error 2
gnumake[1]: *** [all-recursive] Error 1
gnumake: *** [all] Error 2

    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for rpm): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.

[afb@…]

Duplicate, #21861. (fixed in r59467)