graphviz-gui fails to build on 10.6 w/ Xcode 4.2

[posita (Matt Bogosian)]

% /Developer/usr/bin/xcodebuild -version

Xcode 4.2
Build version 4C199

% cat /Users/matt/.site/etc/macports/macports.conf

# MacPorts system wide configuration file
# $Id: macports.conf.in 91509 2012-04-03 21:50:29Z jmr@macports.org $

# Set the directory in which to install ports. Must match where MacPorts itself is installed.
prefix			/Users/matt/.site

# Set the user to run MacPorts compiles, etc as when privileges are dropped during an install
#macportsuser		matt

# Where to store MacPorts working data
portdbpath		/Users/matt/.site/var/macports

# PATH settings that are used for external tools (configure, make, etc.) while
# installing ports. The default paths are given in the example; it need not be
# uncommented.  Customizing binpath is unsupported and is intended for
# advanced users only.
#binpath		/Users/matt/.site/bin:/Users/matt/.site/sbin:/bin:/sbin:/usr/bin:/usr/sbin

# Directory containing Xcode Tools (default is to ask xcode-select)
#developer_dir       /Developer

# Path to PackageMaker.app
# It may be necessary to set this with Xcode >= 4.3, as that version
# requires PackageMaker to be installed manually from the Auxiliary Tools for
# Xcode disk image. The default is /Applications/PackageMaker.app with Xcode
# 4.3 and ${developer_dir}/Applications/Utilities/PackageMaker.app with older
# versions.
#packagemaker_path /Applications/PackageMaker.app

# Directory containing Applications from ports.
applications_dir	/Users/matt/Applications/MacPorts

# Directory containing Frameworks from ports.
frameworks_dir		/Users/matt/Library/Frameworks

# Where to find the sources list.
sources_conf		/Users/matt/.site/etc/macports/sources.conf

# Where to find global variants definition file (optional)
variants_conf		/Users/matt/.site/etc/macports/variants.conf

# When to build ports from source. Default is 'ifneeded', which downloads an
# archive if available or builds from source otherwise. 'always' has the same
# effect as -s on the command line, and 'never' is likewise the same as -b.
#buildfromsource    ifneeded

# Type of archives to use for port images
#
# Supported types: tgz, tar, tbz, tbz2 (default), tlz, txz, xar, zip, cpgz, cpio
#portarchivetype		tbz2

# CPU architecture to compile for. Defaults to i386 or ppc on Mac OS X 10.5
# and earlier, depending on the CPU type detected at runtime. On Mac OS X 10.6
# the default is x86_64 if the CPU supports it, i386 otherwise.
#build_arch			i386

# CPU architectures to use for Universal Binaries (+universal variant)
universal_archs		x86_64 i386

# Use ccache (C/C++ compiler cache) - see http://ccache.samba.org/
#configureccache		no

# Location where ccache stores its files
#ccache_dir			/Users/matt/.site/var/macports/build/.ccache

# Maximum size ccache may use.
# Use 'G', 'M', or 'K' suffix for giga-, mega- or kilobytes.
#ccache_size			2G

# Use distcc (distributed compiler) - see http://distcc.samba.org/
#configuredistcc		no

# Use pipes rather than intermediate files when compiling C/C++/etc
#configurepipe		yes

# Lowered scheduling priority (0-20) to use for make when building ports
#buildnicevalue		0

# Number of simultaneous make jobs (commands) to use when building ports. This
# value may be set to 0 so the number of simultaneous make jobs will be set to
# the number of CPU cores that are automatically detected, or the number of GB
# of physical memory plus one, whichever is less.
#buildmakejobs		0

# umask value to use when a port installs its files
#destroot_umask 022

# Set whether to automatically execute "clean" after "install" of ports
#portautoclean		yes

# Set to yes if you don't want logs to be deleted after successful builds
#keeplogs no

# Rsync server to fetch MacPorts sources from. Note that this is only used
# for selfupdate. The source(s) for the ports tree are set in sources.conf.
# Known mirrors at time of writing (see https://trac.macports.org/wiki/Mirrors
# for the current list):
#   rsync.macports.org        - California, USA (master)
#   trd.no.rsync.macports.org - Trondheim, Norway
#rsync_server		rsync.macports.org

# Rsync directory from which to pull the base/ component (infrastructure) of MacPorts
# If this points to a .tar file, a signed .rmd160 must exist next to it
# on the server and will be used to verify its integrity.
#rsync_dir			release/tarballs/base.tar

# Rsync options
#rsync_options		-rtzv --delete-after

# Options for generated startup items
# startupitem_type may be "default", "systemstarter", "launchd", or "none";
# if the option is empty or "default" then a startupitem type appropriate
# to the platform will be chosen. Mac OS X 10.4 Tiger and above will default to
# launchd, while older Mac OS X systems will default to systemstarter. If
# option "none" is chosen, port startupitems are ignored and no startupitems
# are installed.
#startupitem_type	default

# Option to install symlinks into /Library/LaunchAgents or /Library/LaunchDaemons
# startupitem_install may be empty, "yes" or "no";
# if the option is NOT "no" then a symlink for the startupitem will be created in
# the appropriate system directory.
#startupitem_install    yes

# Extra environment variables to keep. Any variables listed here are added
# to the list of variables that are not removed from the environment used
# while processing ports. As with binpath, setting extra_env is intended for
# advanced users and is unsupported.
# extra_env		KEEP_THIS THIS_TOO

# Proxy support
# Precedence is: env, macports.conf, System Preferences
# That is, if it's set in the environment, that will be used instead of
# anything here or in System Preferences.  Setting proxy_override_env to yes
# will cause any proxies set here (or in System Preferences if set there but
# not here) to override what's in the environment.
# Note that System Preferences doesn't have an rsync proxy definition.
# Also note, on 10.5, sudo will clear many environment variables including
# those for proxy support.
# Equivalent environment variables: http_proxy, HTTPS_PROXY, FTP_PROXY,
# RSYNC_PROXY, NO_PROXY
#
#proxy_override_env    yes
# HTTP proxy:
#proxy_http            hostname:12345
# HTTPS proxy:
#proxy_https       hostname:12345
# FTP proxy:
#proxy_ftp         hostname:12345
# rsync proxy:
#proxy_rsync       hostname:12345
# hosts not to go through the proxy (comma-separated, applies to HTTP, HTTPS,
# and FTP, but not rsync):
#proxy_skip            internal1, internal2, internal3

# Set whether to automatically run rev-upgrade after upgrading ports
#revupgrade_autorun yes
# Option controlling action taken by rev-upgrade, which checks for broken
# linking and can rebuild affected ports. Possible values are
#'rebuild' (default) or 'report'.
#revupgrade_mode rebuild

% cat /Users/matt/.site/var/macports/logs/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/main.log

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main graphviz 2.28.0_4 exists in the ports tree
:debug:main graphviz 2.28.0_4  is the latest installed
:debug:main graphviz 2.28.0_4  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/graphviz
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main No need to upgrade! graphviz 2.28.0_4 >= graphviz 2.28.0_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXaw 1.0.11_0 exists in the ports tree
:debug:main xorg-libXaw 1.0.11_0  is the latest installed
:debug:main xorg-libXaw 1.0.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXaw
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXaw 1.0.11_0 >= xorg-libXaw 1.0.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.2.1_0 exists in the ports tree
:debug:main xorg-libsm 1.2.1_0  is the latest installed
:debug:main xorg-libsm 1.2.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.8_0 exists in the ports tree
:debug:main xorg-libice 1.0.8_0  is the latest installed
:debug:main xorg-libice 1.0.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice 1.0.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.23_0 exists in the ports tree
:debug:main xorg-xproto 7.0.23_0  is the latest installed
:debug:main xorg-xproto 7.0.23_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.3.1_0 exists in the ports tree
:debug:main xorg-libXext 1.3.1_0  is the latest installed
:debug:main xorg-libXext 1.3.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.5.0_0 exists in the ports tree
:debug:main xorg-libX11 1.5.0_0  is the latest installed
:debug:main xorg-libX11 1.5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.1_0  is the latest installed
:debug:main xorg-libXdmcp 1.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.7_0 exists in the ports tree
:debug:main xorg-libXau 1.0.7_0  is the latest installed
:debug:main xorg-libXau 1.0.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.8.1_2 exists in the ports tree
:debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed
:debug:main xorg-libxcb 1.8.1_2 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed
:debug:main xorg-xcb-proto 1.7.1_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto 1.7.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0  is the latest installed
:debug:main libxml2 2.7.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0  is the latest installed
:debug:main libiconv 1.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0  is the latest installed
:debug:main zlib 1.2.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.3_0 exists in the ports tree
:debug:main python27 2.7.3_0  is the latest installed
:debug:main python27 2.7.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2  is the latest installed
:debug:main gettext 0.18.1.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1  is the latest installed
:debug:main ncurses 5.9_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0  is the latest installed
:debug:main expat 2.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0  is the latest installed
:debug:main openssl 1.0.1c_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.13_0 exists in the ports tree
:debug:main sqlite3 3.7.13_0  is the latest installed
:debug:main sqlite3 3.7.13_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.13_0 >= sqlite3 3.7.13_0
:debug:main epoch: in tree: 20090923 installed: 20090923
:debug:main libedit 20120601-3.0_0 exists in the ports tree
:debug:main libedit 20120601-3.0_0  is the latest installed
:debug:main libedit 20120601-3.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +java is the latest installed
:debug:main db46 4.6.21_6 +java is active
:debug:main Merging existing variants '+java' into variants
:debug:main new fully merged portvariants: java +
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant java provides java
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0  is the latest installed
:debug:main bzip2 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_1 exists in the ports tree
:debug:main python_select 0.3_1  is the latest installed
:debug:main python_select 0.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.6_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.6_0  is the latest installed
:debug:main xorg-kbproto 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.2.1_0 exists in the ports tree
:debug:main xorg-xextproto 7.2.1_0  is the latest installed
:debug:main xorg-xextproto 7.2.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXmu 1.1.1_0 exists in the ports tree
:debug:main xorg-libXmu 1.1.1_0  is the latest installed
:debug:main xorg-libXmu 1.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXmu
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXmu 1.1.1_0 >= xorg-libXmu 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.1.3_0 exists in the ports tree
:debug:main xorg-libXt 1.1.3_0  is the latest installed
:debug:main xorg-libXt 1.1.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xpm 3.5.10_0 exists in the ports tree
:debug:main xpm 3.5.10_0  is the latest installed
:debug:main xpm 3.5.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xpm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xpm 3.5.10_0 >= xpm 3.5.10_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main pango 1.30.1_0 exists in the ports tree
:debug:main pango 1.30.1_0 +x11 is the latest installed
:debug:main pango 1.30.1_0 +x11 is active
:debug:main Merging existing variants '+x11' into variants
:debug:main new fully merged portvariants: x11 +
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! pango 1.30.1_0 >= pango 1.30.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.32.3_1 exists in the ports tree
:debug:main glib2 2.32.3_1  is the latest installed
:debug:main glib2 2.32.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib2 2.32.3_1 >= glib2 2.32.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libffi 3.0.11_0 exists in the ports tree
:debug:main libffi 3.0.11_0  is the latest installed
:debug:main libffi 3.0.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.4_0 exists in the ports tree
:debug:main perl5 5.12.4_0 +perl5_12 is the latest installed
:debug:main perl5 5.12.4_0 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.4_0 exists in the ports tree
:debug:main perl5.12 5.12.4_0  is the latest installed
:debug:main perl5.12 5.12.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.10_1 exists in the ports tree
:debug:main gdbm 1.10_1  is the latest installed
:debug:main gdbm 1.10_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main cairo 1.12.2_0 exists in the ports tree
:debug:main cairo 1.12.2_0 +x11 is the latest installed
:debug:main cairo 1.12.2_0 +x11 is active
:debug:main Merging existing variants '+x11' into variants
:debug:main new fully merged portvariants: x11 +
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpixman 0.26.0_0 exists in the ports tree
:debug:main libpixman 0.26.0_0  is the latest installed
:debug:main libpixman 0.26.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libpixman 0.26.0_0 >= libpixman 0.26.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.9.0_1 exists in the ports tree
:debug:main fontconfig 2.9.0_1  is the latest installed
:debug:main fontconfig 2.9.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.4.10_0 exists in the ports tree
:debug:main freetype 2.4.10_0  is the latest installed
:debug:main freetype 2.4.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! freetype 2.4.10_0 >= freetype 2.4.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.11_0 exists in the ports tree
:debug:main libpng 1.4.11_0  is the latest installed
:debug:main libpng 1.4.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xrender 0.9.7_0 exists in the ports tree
:debug:main xrender 0.9.7_0  is the latest installed
:debug:main xrender 0.9.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
:debug:main xorg-renderproto 0.11.1_0  is the latest installed
:debug:main xorg-renderproto 0.11.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-renderproto
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-util 0.3.9_0 exists in the ports tree
:debug:main xorg-xcb-util 0.3.9_0  is the latest installed
:debug:main xorg-xcb-util 0.3.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-util
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-xcb-util 0.3.9_0 >= xorg-xcb-util 0.3.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main Xft2 2.3.0_0 exists in the ports tree
:debug:main Xft2 2.3.0_0  is the latest installed
:debug:main Xft2 2.3.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! Xft2 2.3.0_0 >= Xft2 2.3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8d_0 exists in the ports tree
:debug:main jpeg 8d_0  is the latest installed
:debug:main jpeg 8d_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libLASi 1.1.0_0 exists in the ports tree
:debug:main libLASi 1.1.0_0  is the latest installed
:debug:main libLASi 1.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/libLASi
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libLASi 1.1.0_0 >= libLASi 1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gd2 2.0.35_12 exists in the ports tree
:debug:main gd2 2.0.35_12  is the latest installed
:debug:main gd2 2.0.35_12  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/gd2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gd2 2.0.35_12 >= gd2 2.0.35_12
:debug:main epoch: in tree: 0 installed: 0
:debug:main gts 0.7.6_1 exists in the ports tree
:debug:main gts 0.7.6_1  is the latest installed
:debug:main gts 0.7.6_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/gts
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gts 0.7.6_1 >= gts 0.7.6_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main netpbm 10.47.37_0 exists in the ports tree
:debug:main netpbm 10.47.37_0  is the latest installed
:debug:main netpbm 10.47.37_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/netpbm
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! netpbm 10.47.37_0 >= netpbm 10.47.37_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.5_0 exists in the ports tree
:debug:main tiff 3.9.5_0  is the latest installed
:debug:main tiff 3.9.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jasper 1.900.1_9 exists in the ports tree
:debug:main jasper 1.900.1_9  is the latest installed
:debug:main jasper 1.900.1_9  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
:debug:main epoch: in tree: 0 installed: 0
:debug:main jbigkit 2.0_2 exists in the ports tree
:debug:main jbigkit 2.0_2  is the latest installed
:debug:main jbigkit 2.0_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbigkit
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ghostscript 9.05_2 exists in the ports tree
:debug:main ghostscript 9.05_2  is the latest installed
:debug:main ghostscript 9.05_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/ghostscript
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! ghostscript 9.05_2 >= ghostscript 9.05_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main jbig2dec 0.11_1 exists in the ports tree
:debug:main jbig2dec 0.11_1  is the latest installed
:debug:main jbig2dec 0.11_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbig2dec
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jbig2dec 0.11_1 >= jbig2dec 0.11_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms2 2.3_0 exists in the ports tree
:debug:main lcms2 2.3_0  is the latest installed
:debug:main lcms2 2.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms2
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! lcms2 2.3_0 >= lcms2 2.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.25_0 exists in the ports tree
:debug:main libidn 1.25_0  is the latest installed
:debug:main libidn 1.25_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libidn 1.25_0 >= libidn 1.25_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpaper 1.1.24_0 exists in the ports tree
:debug:main libpaper 1.1.24_0  is the latest installed
:debug:main libpaper 1.1.24_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/libpaper
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libpaper 1.1.24_0 >= libpaper 1.1.24_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main urw-fonts 1.0.7pre44_0 exists in the ports tree
:debug:main urw-fonts 1.0.7pre44_0  is the latest installed
:debug:main urw-fonts 1.0.7pre44_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /Users/matt/.site/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/urw-fonts
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts 1.0.7pre44_0
:msg:main --->  Computing dependencies for graphviz-gui:info:main .:debug:main Checking for conflicts against graphviz-gui
:debug:main Searching for dependency: graphviz-gui-devel
:debug:main Didn't find receipt, going to depspec regex for: graphviz-gui-devel
:debug:main Searching for dependency: graphviz-oldgui
:debug:main Didn't find receipt, going to depspec regex for: graphviz-oldgui
:debug:main Searching for dependency: graphviz
:debug:main Found Dependency: receipt exists for graphviz
:msg:main 
:debug:main Executing org.macports.main (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.archivefetch (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.configure (graphviz-gui)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Tue Jun 19 15:55:13 PDT 2012
:notice:build --->  Building graphviz-gui
:debug:build Executing org.macports.build (graphviz-gui)
:debug:build Assembled command: 'cd "/Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx" && /Developer/usr/bin/xcodebuild  -alltargets -configuration Release build OBJROOT=build/ SYMROOT=build/ MACOSX_DEPLOYMENT_TARGET=10.6 ARCHS=x86_64 SDKROOT="" GCC_VERSION=com.apple.compilers.llvm.clang.1_0 PREFIX=/Users/matt/.site'
:info:build Build settings from command line:
:info:build     ARCHS = x86_64
:info:build     GCC_VERSION = com.apple.compilers.llvm.clang.1_0
:info:build     MACOSX_DEPLOYMENT_TARGET = 10.6
:info:build     OBJROOT = build/
:info:build     PREFIX = /Users/matt/.site
:info:build     SDKROOT = 
:info:build     SYMROOT = build/
:info:build 
:info:build === BUILD NATIVE TARGET application OF PROJECT graphviz WITH CONFIGURATION Release ===
:info:build Check dependencies
:info:build 
:info:build CompileXIB English.lproj/Document.xib
:info:build     cd /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx
:info:build     setenv XCODE_DEVELOPER_USR_PATH /Developer/usr/bin/..
:info:build     /Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/build/Release/Graphviz.app/Contents/Resources/English.lproj/Document.nib /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/English.lproj/Document.xib --sdk ""
:info:build 
:info:build CompileXIB English.lproj/MainMenu.xib
:info:build     cd /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx
:info:build     setenv XCODE_DEVELOPER_USR_PATH /Developer/usr/bin/..
:info:build     /Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/build/Release/Graphviz.app/Contents/Resources/English.lproj/MainMenu.nib /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/English.lproj/MainMenu.xib --sdk ""
:info:build 
:info:build CompileXIB English.lproj/Attributes.xib
:info:build     cd /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx
:info:build     setenv XCODE_DEVELOPER_USR_PATH /Developer/usr/bin/..
:info:build     /Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/build/Release/Graphviz.app/Contents/Resources/English.lproj/Attributes.nib /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/English.lproj/Attributes.xib --sdk ""
:info:build Command /Developer/usr/bin/ibtool failed with exit code 255
:info:build 
:info:build CompileXIB English.lproj/Export.xib
:info:build     cd /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx
:info:build     setenv XCODE_DEVELOPER_USR_PATH /Developer/usr/bin/..
:info:build     /Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/build/Release/Graphviz.app/Contents/Resources/English.lproj/Export.nib /Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx/English.lproj/Export.xib --sdk ""
:info:build 
:info:build Verify exit code of build task 'CompileXIB MainMenu.xib'
:info:build Build task failed without generating error messages.
:info:build 
:info:build Verify exit code of build task 'CompileXIB Export.xib'
:info:build Build task failed without generating error messages.
:info:build 
:info:build Verify exit code of build task 'CompileXIB Document.xib'
:info:build Build task failed without generating error messages.
:info:build 
:info:build 
:info:build ** BUILD FAILED **
:info:build 
:info:build 
:info:build The following build commands failed:
:info:build 	CompileXIB English.lproj/Document.xib
:info:build 	CompileXIB English.lproj/MainMenu.xib
:info:build 	CompileXIB English.lproj/Attributes.xib
:info:build 	CompileXIB English.lproj/Export.xib
:info:build (4 failures)
:info:build Command failed: cd "/Users/matt/.site/var/macports/build/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/work/graphviz-2.28.0/macosx" && /Developer/usr/bin/xcodebuild  -alltargets -configuration Release build OBJROOT=build/ SYMROOT=build/ MACOSX_DEPLOYMENT_TARGET=10.6 ARCHS=x86_64 SDKROOT="" GCC_VERSION=com.apple.compilers.llvm.clang.1_0 PREFIX=/Users/matt/.site
:info:build Exit code: 65
:error:build org.macports.build for port graphviz-gui returned: command execution failed
:debug:build Error code: NONE
:debug:build Backtrace: command execution failed
    while executing
"$procedure $targetname"
:info:build Warning: targets not executed for graphviz-gui: org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Please see the log file for port graphviz-gui for details:
    /Users/matt/.site/var/macports/logs/_Users_matt_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz-gui/graphviz-gui/main.log

[ryandesign (Ryan Carsten Schmidt)]

Since the log says "Skipping completed" please "sudo port clean graphviz-gui", then try again, then attach (not paste) the new main.log.

[posita (Matt Bogosian)]

Mea culpa for the paste-vs-attachment and failure to run clean before rebuilding. It works now. I have no idea what happened. My apologies.

[posita (Matt Bogosian)]

(Please close.)

[ryandesign (Ryan Carsten Schmidt)]

No problem. It could have been yet another case of #29223, which I really hope I have time to fix one of these days.