installing dnsiff failed

[Jeffreygrimmie@…]

version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libnids 1.24_0 exists in the ports tree :debug:main libnids 1.24_0 +libnet11 is the latest installed :debug:main libnids 1.24_0 +libnet11 is active :debug:main Merging existing variants '+libnet11' into variants :debug:main new fully merged portvariants: libnet11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libnids :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant libnet11 provides libnet11 :debug:main No need to upgrade! libnids 1.24_0 >= libnids 1.24_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpcap 1.2.1_0 exists in the ports tree :debug:main libpcap 1.2.1_0 is the latest installed :debug:main libpcap 1.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libpcap :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libpcap 1.2.1_0 >= libpcap 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libnet11 1.1.6_1 exists in the ports tree :debug:main libnet11 1.1.6_1 is the latest installed :debug:main libnet11 1.1.6_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/libnet11 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libnet11 1.1.6_1 >= libnet11 1.1.6_1 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.1c_0 exists in the ports tree :debug:main openssl 1.0.1c_0 is the latest installed :debug:main openssl 1.0.1c_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXmu 1.1.1_0 exists in the ports tree :debug:main xorg-libXmu 1.1.1_0 is the latest installed :debug:main xorg-libXmu 1.1.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXmu :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXmu 1.1.1_0 >= xorg-libXmu 1.1.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXext 1.3.1_0 exists in the ports tree :debug:main xorg-libXext 1.3.1_0 is the latest installed :debug:main xorg-libXext 1.3.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXext :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libX11 1.5.0_0 exists in the ports tree :debug:main xorg-libX11 1.5.0_0 is the latest installed :debug:main xorg-libX11 1.5.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libX11 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libX11 1.5.0_0 >= xorg-libX11 1.5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdmcp 1.1.1_0 exists in the ports tree :debug:main xorg-libXdmcp 1.1.1_0 is the latest installed :debug:main xorg-libXdmcp 1.1.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXdmcp :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXau 1.0.7_0 exists in the ports tree :debug:main xorg-libXau 1.0.7_0 is the latest installed :debug:main xorg-libXau 1.0.7_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXau :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xproto 7.0.23_0 exists in the ports tree :debug:main xorg-xproto 7.0.23_0 is the latest installed :debug:main xorg-xproto 7.0.23_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xproto :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libxcb 1.8.1_2 exists in the ports tree :debug:main xorg-libxcb 1.8.1_2 +python27 is the latest installed :debug:main xorg-libxcb 1.8.1_2 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libxcb :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant python27 provides python27 :debug:main No need to upgrade! xorg-libxcb 1.8.1_2 >= xorg-libxcb 1.8.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-proto 1.7.1_0 exists in the ports tree :debug:main xorg-xcb-proto 1.7.1_0 +python27 is the latest installed :debug:main xorg-xcb-proto 1.7.1_0 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xcb-proto :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main Executing variant python27 provides python27 :debug:main No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto 1.7.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.7.8_0 exists in the ports tree :debug:main libxml2 2.7.8_0 is the latest installed :debug:main libxml2 2.7.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.3_0 exists in the ports tree :debug:main python27 2.7.3_0 is the latest installed :debug:main python27 2.7.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.13_0 exists in the ports tree :debug:main sqlite3 3.7.13_0 is the latest installed :debug:main sqlite3 3.7.13_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.13_0 >= sqlite3 3.7.13_0 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20120601-3.0_0 exists in the ports tree :debug:main libedit 20120601-3.0_0 is the latest installed :debug:main libedit 20120601-3.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 is the latest installed :debug:main db46 4.6.21_6 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed :debug:main xorg-libpthread-stubs 0.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libpthread-stubs :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-kbproto 1.0.6_0 exists in the ports tree :debug:main xorg-kbproto 1.0.6_0 is the latest installed :debug:main xorg-kbproto 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-kbproto :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xextproto 7.2.1_0 exists in the ports tree :debug:main xorg-xextproto 7.2.1_0 is the latest installed :debug:main xorg-xextproto 7.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-xextproto :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXt 1.1.3_0 exists in the ports tree :debug:main xorg-libXt 1.1.3_0 is the latest installed :debug:main xorg-libXt 1.1.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libXt :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXt 1.1.3_0 >= xorg-libXt 1.1.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libsm 1.2.1_0 exists in the ports tree :debug:main xorg-libsm 1.2.1_0 is the latest installed :debug:main xorg-libsm 1.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libsm :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libsm 1.2.1_0 >= xorg-libsm 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libice 1.0.8_0 exists in the ports tree :debug:main xorg-libice 1.0.8_0 is the latest installed :debug:main xorg-libice 1.0.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xorg-libice :debug:main OS darwin/12.0.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libice 1.0.8_0 >= xorg-libice 1.0.8_0 :msg:main ---> Computing dependencies for dsniff:info:main .:debug:main Checking for conflicts against dsniff :debug:main Searching for dependency: dsniff-devel :debug:main Didn't find receipt, going to depspec regex for: dsniff-devel :debug:main Searching for dependency: libnids :debug:main Found Dependency: receipt exists for libnids :debug:main Searching for dependency: libpcap :debug:main Found Dependency: receipt exists for libpcap :debug:main Searching for dependency: openssl :debug:main Found Dependency: receipt exists for openssl :debug:main Searching for dependency: xorg-libXmu :debug:main Found Dependency: receipt exists for xorg-libXmu :msg:main :debug:main Executing org.macports.main (dsniff) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:archivefetch archivefetch phase started at Fri Jul 27 10:35:54 PDT 2012 :msg:archivefetch ---> Fetching archive for dsniff :debug:archivefetch Executing org.macports.archivefetch (dsniff) :debug:archivefetch euid/egid changed to: 0/0 :debug:archivefetch chowned /opt/local/var/macports/incoming to macports :debug:archivefetch euid/egid changed to: 502/501 :info:archivefetch ---> dsniff-2.3_5.darwin_12.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified :msg:archivefetch ---> Attempting to fetch dsniff-2.3_5.darwin_12.x86_64.tbz2 from ​http://packages.macports.org/dsniff :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :debug:archivefetch Privilege de-escalation not attempted as not running as root. :debug:fetch fetch phase started at Fri Jul 27 10:35:54 PDT 2012 :notice:fetch ---> Fetching distfiles for dsniff :debug:fetch Executing org.macports.fetch (dsniff) :debug:fetch Privilege de-escalation not attempted as not running as root. :debug:checksum checksum phase started at Fri Jul 27 10:35:54 PDT 2012 :notice:checksum ---> Verifying checksum(s) for dsniff :debug:checksum Executing org.macports.checksum (dsniff) :info:checksum ---> Checksumming dsniff-2.3.tar.gz :debug:checksum Correct (md5) checksum for dsniff-2.3.tar.gz :debug:checksum Privilege de-escalation not attempted as not running as root. :debug:extract extract phase started at Fri Jul 27 10:35:54 PDT 2012 :notice:extract ---> Extracting dsniff :debug:extract Executing org.macports.extract (dsniff) :info:extract ---> Extracting dsniff-2.3.tar.gz :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/dsniff/dsniff-2.3.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - :debug:extract euid/egid changed to: 0/0 :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work to macports :debug:extract euid/egid changed to: 502/501 :debug:extract Privilege de-escalation not attempted as not running as root. :debug:patch patch phase started at Fri Jul 27 10:35:54 PDT 2012 :debug:patch Executing org.macports.patch (dsniff) :notice:patch ---> Applying patches to dsniff :info:patch ---> Applying patch-pcaputil.c :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/patch -p0' :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/dsniff/files/patch-pcaputil.c' :info:patch patching file pcaputil.c :info:patch ---> Applying patch-sshcrypto.c :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/patch -p0' :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/dsniff/files/patch-sshcrypto.c' :info:patch patching file sshcrypto.c :debug:patch Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Fri Jul 27 10:35:54 PDT 2012 :notice:configure ---> Configuring dsniff :debug:configure Using compiler 'Mac OS X clang' :debug:configure Executing org.macports.configure (dsniff) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -DBIND_8_COMPAT -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man :info:configure creating cache ./config.cache :info:configure checking for gcc... /usr/bin/clang :info:configure checking whether the C compiler (/usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -L/opt/local/lib -arch x86_64) works... yes :info:configure checking whether the C compiler (/usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -L/opt/local/lib -arch x86_64) is a cross-compiler... no :info:configure checking whether we are using GNU C... yes :info:configure checking whether /usr/bin/clang accepts -g... yes :info:configure checking for a BSD compatible install... /usr/bin/install -c :info:configure checking for ranlib... ranlib :info:configure checking how to run the C preprocessor... /usr/bin/clang -E :info:configure checking for X... libraries , headers :info:configure checking for dnet_ntoa in -ldnet... no :info:configure checking for dnet_ntoa in -ldnet_stub... no :info:configure checking for gethostbyname... yes :info:configure checking for connect... yes :info:configure checking for remove... yes :info:configure checking for shmat... yes :info:configure checking for IceConnectionNumber in -lICE... yes :info:configure checking for ANSI C header files... yes :info:configure checking for err.h... yes :info:configure checking for fcntl.h... yes :info:configure checking for sys/ioctl.h... yes :info:configure checking for sys/queue.h... yes :info:configure checking for unistd.h... yes :info:configure checking for libgen.h... yes :info:configure checking for net/if_tun.h... no :info:configure checking for MIN and MAX in sys/param.h... yes :info:configure checking for working const... yes :info:configure checking for size_t... yes :info:configure checking whether struct tm is in sys/time.h or time.h... time.h :info:configure checking for u_int32_t... yes :info:configure checking for u_int64_t... yes :info:configure checking for in_addr_t... yes :info:configure checking whether /usr/bin/clang needs -traditional... no :info:configure checking for 8-bit clean memcmp... yes :info:configure checking return type of signal handlers... void :info:configure checking for strftime... yes :info:configure checking for gethostname... yes :info:configure checking for socket... yes :info:configure checking for strdup... yes :info:configure checking for strstr... yes :info:configure checking for xdr_fhstatus in -lrpcsvc... no :info:configure checking for socket in -lsocket... no :info:configure checking for gethostbyname in -lnsl... no :info:configure checking for dn_expand in -lresolv... yes :info:configure checking for dirname... yes :info:configure checking for strlcpy... yes :info:configure checking for strlcat... yes :info:configure checking for strsep... yes :info:configure checking for MD5Update... no :info:configure checking for warnx... yes :info:configure checking for ether_ntoa... yes :info:configure checking for Berkeley DB with 1.85 compatibility... yes :info:configure checking for libpcap... yes :info:configure checking for libnet... yes :info:configure checking for libnids... yes :info:configure checking whether libnids version is good... yes :info:configure checking for OpenSSL... yes :info:configure updating cache ./config.cache :info:configure creating ./config.status :info:configure creating Makefile :info:configure creating config.h :debug:configure Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Fri Jul 27 10:35:57 PDT 2012 :notice:build ---> Building dsniff :debug:build Executing org.macports.build (dsniff) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/make -j4 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/make -j4 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3' :info:build /usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./missing/dummy.c :info:build /usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./missing/md5.c :info:build /usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./arpspoof.c :info:build /usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./arp.c :info:build /usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./dnsspoof.c :info:build ./missing/md5.c:151:27: warning: argument to 'sizeof' in 'builtin_memset_chk' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] :info:build memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */ :info:build <sup>:info:build /usr/include/secure/_string.h:77:41: note: expanded from macro 'memset' :info:build ? builtin_memset_chk (dest, val, len, darwin_obsz0 (dest)) \ :info:build</sup> :info:build ./arp.c:74:4: warning: implicitly declaring library function 'memcpy' with type 'void *(void *, const void *, unsigned long)' :info:build memcpy(ether->ether_addr_octet, LLADDR(sdl), :info:build <sup>:info:build ./arp.c:74:4: note: please include the header <string.h> or explicitly provide a declaration for 'memcpy' :info:build ./arpspoof.c:25:32: warning: declaration of 'struct ether_addr' will not be visible outside of this function [-Wvisibility] :info:build extern char *ether_ntoa(struct ether_addr *); :info:build</sup> :info:build ./arpspoof.c:26:47: warning: declaration of 'struct ether_addr' will not be visible outside of this function [-Wvisibility] :info:build extern int arp_cache_lookup(in_addr_t, struct ether_addr *); :info:build <sup>:info:build ./arpspoof.c:29:26: warning: tentative definition of variable with internal linkage has incomplete non-array type 'struct ether_addr' [-Wtentative-definition-incomplete-type] :info:build static struct ether_addr spoof_mac, target_mac; :info:build</sup> :info:build ./arpspoof.c:29:15: note: forward declaration of 'struct ether_addr' :info:build static struct ether_addr spoof_mac, target_mac; :info:build <sup>:info:build ./arpspoof.c:29:37: warning: tentative definition of variable with internal linkage has incomplete non-array type 'struct ether_addr' [-Wtentative-definition-incomplete-type] :info:build static struct ether_addr spoof_mac, target_mac; :info:build</sup> :info:build ./arpspoof.c:29:15: note: forward declaration of 'struct ether_addr' :info:build static struct ether_addr spoof_mac, target_mac; :info:build <sup>:info:build ./arpspoof.c:49:47: error: too many arguments to function call, expected 1, have 3 :info:build (sha = (u_char *)libnet_get_hwaddr(llif, dev, ebuf)) == NULL) { :info:build ~</sup> :info:build /opt/local/include/./libnet/libnet-functions.h:1906:1: note: 'libnet_get_hwaddr' declared here :info:build struct libnet_ether_addr * :info:build <sup>:info:build ./arpspoof.c:53:14: warning: implicit declaration of function 'libnet_get_ipaddr' is invalid in C99 [-Wimplicit-function-declaration] :info:build if ((spa = libnet_get_ipaddr(llif, dev, ebuf)) == 0) :info:build</sup> :info:build ./arpspoof.c:58:7: warning: assigning to 'u_char *' (aka 'unsigned char *') from 'char [7]' converts between pointers to integer types with different sign [-Wpointer-sign] :info:build tha = "\xff\xff\xff\xff\xff\xff"; :info:build <sup>:info:build ./arpspoof.c:60:61: error: too few arguments to function call, expected 7, have 6 :info:build libnet_build_ethernet(tha, sha, ETHERTYPE_ARP, NULL, 0, pkt); :info:build ~</sup> :info:build /opt/local/include/./libnet/libnet-functions.h:497:1: note: 'libnet_build_ethernet' declared here :info:build libnet_ptag_t :info:build <sup>:info:build ./arpspoof.c:64:20: error: use of undeclared identifier 'ETH_H' :info:build NULL, 0, pkt + ETH_H); :info:build</sup> :info:build ./arpspoof.c:67:14: warning: incompatible pointer types passing 'struct ether_addr *' to parameter of type 'struct ether_addr *' [-Wincompatible-pointer-types] :info:build ether_ntoa((struct ether_addr *)sha)); :info:build <sup>~ :info:build ./arpspoof.c:25:44: note: passing argument to parameter here :info:build extern char *ether_ntoa(struct ether_addr *); :info:build</sup> :info:build ./arpspoof.c:71:15: warning: incompatible pointer types passing 'struct ether_addr *' to parameter of type 'struct ether_addr *' [-Wincompatible-pointer-types] :info:build ether_ntoa((struct ether_addr *)tha), :info:build <sup>~ :info:build ./arpspoof.c:25:44: note: passing argument to parameter here :info:build extern char *ether_ntoa(struct ether_addr *); :info:build</sup> :info:build ./arpspoof.c:72:4: warning: implicit declaration of function 'libnet_host_lookup' is invalid in C99 [-Wimplicit-function-declaration] :info:build libnet_host_lookup(tpa, 0), :info:build <sup>:info:build ./arpspoof.c:70:45: warning: format specifies type 'char *' but the argument has type 'int' [-Wformat] :info:build fprintf(stderr, "%s 0806 42: arp who-has %s tell %s\n", :info:build ~</sup> :info:build %d :info:build ./arpspoof.c:70:53: warning: format specifies type 'char *' but the argument has type 'int' [-Wformat] :info:build fprintf(stderr, "%s 0806 42: arp who-has %s tell %s\n", :info:build ~ <sup>:info:build %d :info:build ./arpspoof.c:77:15: warning: incompatible pointer types passing 'struct ether_addr *' to parameter of type 'struct ether_addr *' [-Wincompatible-pointer-types] :info:build ether_ntoa((struct ether_addr *)tha), :info:build</sup> ~ :info:build ./arpspoof.c:25:44: note: passing argument to parameter here :info:build extern char *ether_ntoa(struct ether_addr *); :info:build <sup>:info:build 1 warning generated. :info:build ./arpspoof.c:76:43: warning: format specifies type 'char *' but the argument has type 'int' [-Wformat] :info:build fprintf(stderr, "%s 0806 42: arp reply %s is-at ", :info:build ~</sup> :info:build %d :info:build ./arpspoof.c:80:15: warning: incompatible pointer types passing 'struct ether_addr *' to parameter of type 'struct ether_addr *' [-Wincompatible-pointer-types] :info:build ether_ntoa((struct ether_addr *)sha)); :info:build <sup>~ :info:build ./arpspoof.c:25:44: note: passing argument to parameter here :info:build extern char *ether_ntoa(struct ether_addr *); :info:build</sup> :info:build ./arpspoof.c:82:10: warning: implicit declaration of function 'libnet_write_link_layer' is invalid in C99 [-Wimplicit-function-declaration] :info:build return (libnet_write_link_layer(llif, dev, pkt, sizeof(pkt)) == sizeof(pkt)); :info:build <sup>:info:build ./arpspoof.c:114:28: warning: incompatible pointer types passing 'struct ether_addr *' to parameter of type 'struct ether_addr *' [-Wincompatible-pointer-types] :info:build if (arp_cache_lookup(ip, mac) == 0) :info:build</sup> :info:build /usr/bin/clang -pipe -O2 -DBIND_8_COMPAT -arch x86_64 -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include -I/opt/local/include -I./missing -c ./pcaputil.c :info:build ./arpspoof.c:26:59: note: passing argument to parameter here :info:build extern int arp_cache_lookup(in_addr_t, struct ether_addr *); :info:build <sup>:info:build ./arpspoof.c:162:21: warning: implicit declaration of function 'libnet_name_resolve' is invalid in C99 [-Wimplicit-function-declaration] :info:build if ((target_ip = libnet_name_resolve(optarg, 1)) == -1) :info:build</sup> :info:build ./arpspoof.c:181:14: warning: implicit declaration of function 'libnet_open_link_interface' is invalid in C99 [-Wimplicit-function-declaration] :info:build if ((llif = libnet_open_link_interface(intf, ebuf)) == 0) :info:build <sup>:info:build ./arpspoof.c:181:12: warning: incompatible integer to pointer conversion assigning to 'struct libnet_link_int *' from 'int'; :info:build if ((llif = libnet_open_link_interface(intf, ebuf)) == 0) :info:build</sup> :info:build ./arpspoof.c:29:26: error: tentative definition has type 'struct ether_addr' that is never completed :info:build static struct ether_addr spoof_mac, target_mac; :info:build <sup>:info:build ./arpspoof.c:29:15: note: forward declaration of 'struct ether_addr' :info:build static struct ether_addr spoof_mac, target_mac; :info:build</sup> :info:build ./arpspoof.c:29:37: error: tentative definition has type 'struct ether_addr' that is never completed :info:build static struct ether_addr spoof_mac, target_mac; :info:build <sup>:info:build ./arpspoof.c:29:15: note: forward declaration of 'struct ether_addr' :info:build static struct ether_addr spoof_mac, target_mac; :info:build</sup> :info:build 19 warnings and 5 errors generated. :info:build make: * [arpspoof.o] Error 1 :info:build make: * Waiting for unfinished jobs.... :info:build ./dnsspoof.c:95:14: warning: implicit declaration of function 'libnet_open_link_interface' is invalid in C99 [-Wimplicit-function-declaration] :info:build if ((llif = libnet_open_link_interface(dev, buf)) == NULL) :info:build <sup>:info:build ./dnsspoof.c:95:12: warning: incompatible integer to pointer conversion assigning to 'struct libnet_link_int *' from 'int'; :info:build if ((llif = libnet_open_link_interface(dev, buf)) == NULL) :info:build</sup> :info:build ./dnsspoof.c:98:17: warning: implicit declaration of function 'libnet_get_ipaddr' is invalid in C99 [-Wimplicit-function-declaration] :info:build if ((lnet_ip = libnet_get_ipaddr(llif, dev, buf)) == -1) :info:build <sup>:info:build ./dnsspoof.c:103:2: warning: implicit declaration of function 'libnet_close_link_interface' is invalid in C99 [-Wimplicit-function-declaration] :info:build libnet_close_link_interface(llif); :info:build</sup> :info:build ./dnsspoof.c:191:54: error: incomplete definition of type 'struct libnet_ip_hdr' :info:build udp = (struct libnet_udp_hdr *)(pkt + pcap_off + (ip->ip_hl * 4)); :info:build <sup>:info:build ./dnsspoof.c:181:9: note: forward declaration of 'struct libnet_ip_hdr' :info:build struct libnet_ip_hdr *ip; :info:build</sup> :info:build ./dnsspoof.c:213:12: error: use of undeclared identifier 'IP_H' :info:build p = buf + IP_H + UDP_H + dnslen; :info:build <sup>:info:build ./dnsspoof.c:213:19: error: use of undeclared identifier 'UDP_H' :info:build p = buf + IP_H + UDP_H + dnslen; :info:build</sup> :info:build ./dnsspoof.c:225:10: warning: assigning to 'u_char *' (aka 'unsigned char *') from 'char *' converts between pointers to integer types with different sign [-Wpointer-sign] :info:build if ((q = dns_lookup_ptr(name)) == NULL) :info:build <sup>:info:build ./dnsspoof.c:229:20: warning: passing 'u_char *' (aka 'unsigned char *') to parameter of type 'const char *' converts between pointers to integer types with different sign [-Wpointer-sign] :info:build anslen = dn_comp(q, p + 12, 256, NULL, NULL); :info:build</sup> :info:build /usr/include/resolv.h:452:31: note: passing argument to parameter here :info:build int dn_comp P((const char *, u_char *, int, u_char , u_char )); :info:build <sup>:info:build /usr/include/sys/cdefs.h:92:21: note: expanded from macro 'P' :info:build #define P(protos) protos /* full-blown ANSI C */ :info:build</sup> :info:build ./dnsspoof.c:236:2: warning: implicit declaration of function 'libnet_build_ip' is invalid in C99 [-Wimplicit-function-declaration] :info:build libnet_build_ip(UDP_H + dnslen + anslen, 0, libnet_get_prand(PRu16), :info:build <sup>:info:build ./dnsspoof.c:236:18: error: use of undeclared identifier 'UDP_H' :info:build libnet_build_ip(UDP_H + dnslen + anslen, 0, libnet_get_prand(PRu16), :info:build</sup> :info:build ./dnsspoof.c:241:34: error: use of undeclared identifier 'IP_H' :info:build NULL, dnslen + anslen, buf + IP_H); :info:build <sup>:info:build ./dnsspoof.c:243:15: error: use of undeclared identifier 'IP_H' :info:build memcpy(buf + IP_H + UDP_H, (u_char *)dns, dnslen); :info:build</sup> :info:build /usr/include/secure/_string.h:54:21: note: expanded from macro 'memcpy' :info:build ((darwin_obsz0 (dest) != (size_t) -1) \ :info:build <sup>:info:build /usr/include/secure/_common.h:38:55: note: expanded from macro 'darwin_obsz0' :info:build #define darwin_obsz0(object) builtin_object_size (object, 0) :info:build</sup> :info:build ./dnsspoof.c:243:22: error: use of undeclared identifier 'UDP_H' :info:build memcpy(buf + IP_H + UDP_H, (u_char *)dns, dnslen); :info:build <sup>:info:build /usr/include/secure/_string.h:54:21: note: expanded from macro 'memcpy' :info:build ((darwin_obsz0 (dest) != (size_t) -1) \ :info:build</sup> :info:build /usr/include/secure/_common.h:38:55: note: expanded from macro 'darwin_obsz0' :info:build #define darwin_obsz0(object) builtin_object_size (object, 0) :info:build <sup>:info:build ./dnsspoof.c:243:15: error: use of undeclared identifier 'IP_H' :info:build memcpy(buf + IP_H + UDP_H, (u_char *)dns, dnslen); :info:build</sup> :info:build /usr/include/secure/_string.h:55:30: note: expanded from macro 'memcpy' :info:build ? builtin_memcpy_chk (dest, src, len, darwin_obsz0 (dest)) \ :info:build <sup>:info:build ./dnsspoof.c:243:22: error: use of undeclared identifier 'UDP_H' :info:build memcpy(buf + IP_H + UDP_H, (u_char *)dns, dnslen); :info:build</sup> :info:build /usr/include/secure/_string.h:55:30: note: expanded from macro 'memcpy' :info:build ? builtin_memcpy_chk (dest, src, len, darwin_obsz0 (dest)) \ :info:build <sup>:info:build ./dnsspoof.c:243:15: error: use of undeclared identifier 'IP_H' :info:build memcpy(buf + IP_H + UDP_H, (u_char *)dns, dnslen); :info:build</sup> :info:build /usr/include/secure/_string.h:56:27: note: expanded from macro 'memcpy' :info:build : inline_memcpy_chk (dest, src, len)) :info:build <sup>:info:build ./dnsspoof.c:243:22: error: use of undeclared identifier 'UDP_H' :info:build memcpy(buf + IP_H + UDP_H, (u_char *)dns, dnslen); :info:build</sup> :info:build /usr/include/secure/_string.h:56:27: note: expanded from macro 'memcpy' :info:build : inline_memcpy_chk (dest, src, len)) :info:build <sup>:info:build ./dnsspoof.c:245:25: error: use of undeclared identifier 'IP_H' :info:build dns = (HEADER *)(buf + IP_H + UDP_H); :info:build</sup> :info:build ./dnsspoof.c:245:32: error: use of undeclared identifier 'UDP_H' :info:build dns = (HEADER *)(buf + IP_H + UDP_H); :info:build <sup>:info:build ./dnsspoof.c:252:39: error: use of undeclared identifier 'UDP_H' :info:build libnet_do_checksum(buf, IPPROTO_UDP, UDP_H + dnslen); :info:build</sup> :info:build ./dnsspoof.c:254:6: warning: implicit declaration of function 'libnet_write_ip' is invalid in C99 [-Wimplicit-function-declaration] :info:build if (libnet_write_ip(lnet_sock, buf, IP_H + UDP_H + dnslen) < 0) :info:build <sup>:info:build ./dnsspoof.c:254:38: error: use of undeclared identifier 'IP_H' :info:build if (libnet_write_ip(lnet_sock, buf, IP_H + UDP_H + dnslen) < 0) :info:build</sup> :info:build ./dnsspoof.c:254:45: error: use of undeclared identifier 'UDP_H' :info:build if (libnet_write_ip(lnet_sock, buf, IP_H + UDP_H + dnslen) < 0) :info:build <sup>:info:build ./dnsspoof.c:258:8: warning: implicit declaration of function 'libnet_host_lookup' is invalid in C99 [-Wimplicit-function-declaration] :info:build libnet_host_lookup(ip->ip_src.s_addr, 0), ntohs(udp->uh_sport), :info:build</sup> :info:build ./dnsspoof.c:258:29: error: incomplete definition of type 'struct libnet_ip_hdr' :info:build libnet_host_lookup(ip->ip_src.s_addr, 0), ntohs(udp->uh_sport), :info:build <sup>:info:build ./dnsspoof.c:181:9: note: forward declaration of 'struct libnet_ip_hdr' :info:build struct libnet_ip_hdr *ip; :info:build</sup> :info:build ./dnsspoof.c:266:2: warning: implicit declaration of function 'libnet_close_raw_sock' is invalid in C99 [-Wimplicit-function-declaration] :info:build libnet_close_raw_sock(lnet_sock); :info:build <sup>:info:build ./dnsspoof.c:304:64: warning: format specifies type 'char *' but the argument has type 'int' [-Wformat] :info:build else snprintf(buf, sizeof(buf), "udp dst port 53 and not src %s", :info:build ~</sup> :info:build %d :info:build /usr/include/secure/_stdio.h:56:62: note: expanded from macro 'snprintf' :info:build builtin_snprintf_chk (str, len, 0, darwin_obsz(str), VA_ARGS) :info:build <sup>:info:build ./dnsspoof.c:313:19: warning: implicit declaration of function 'libnet_open_raw_sock' is invalid in C99 [-Wimplicit-function-declaration] :info:build if ((lnet_sock = libnet_open_raw_sock(IPPROTO_RAW)) == -1) :info:build</sup> :info:build ./dnsspoof.c:316:20: error: too few arguments to function call, expected 1, have 0 :info:build libnet_seed_prand(); :info:build ~ <sup>:info:build /opt/local/include/./libnet/libnet-functions.h:155:1: note: 'libnet_seed_prand' declared here :info:build int :info:build</sup> :info:build 12 warnings and 18 errors generated. :info:build make: * [dnsspoof.o] Error 1 :info:build 1 warning generated. :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/work/dsniff-2.3" && /usr/bin/make -j4 -w all :info:build Exit code: 2 :error:build org.macports.build for port dsniff returned: command execution failed :debug:build Error code: CHILDSTATUS 15834 2 :debug:build Backtrace: command execution failed

while executing

"system -nice 0 $fullcmdstring"

("eval" body line 1) invoked from within

"eval system $notty $nice \$fullcmdstring"

invoked from within

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" :info:build Warning: targets not executed for dsniff: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port dsniff for details:

/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_dsniff/dsniff/main.log