BSD tar can create corrupted archives on Catalina, Big Sur, Monterey, Ventura

[catap (Kirill A. Korinsky)]

While I'm working on updating pari to the latest version, I discovered a bug with broken tar on Ventura x86.

Long story short: port build a libpari-gmp.dylib that starts as:

  0000000 facf feed 0007 0100 0003 0000 0006 0000
  0000010 0010 0000 0650 0000 0085 0010 0000 0000
  0000020 0019 0000 01d8 0000 5f5f 4554 5458 0000
  0000030 0000 0000 0000 0000 0000 0000 0000 0000
  0000040 c000 006c 0000 0000 0000 0000 0000 0000
  0000050 c000 006c 0000 0000 0005 0000 0005 0000
  0000060 0005 0000 0000 0000 5f5f 6574 7478 0000
  0000070 0000 0000 0000 0000 5f5f 4554 5458 0000
  0000080 0000 0000 0000 0000 4498 0000 0000 0000
  0000090 a78c 0065 0000 0000 4498 0000 0002 0000

After it is installed into the system, the same files look like this:

  0000000 0000 0000 0000 0000 0000 0000 0000 0000
  *
  0600000 49d2 34f7 48cc 0489 48cf c6ff 3948 75f3
  0600010 48d5 c1ff 3948 75d9 48c8 458b 49b0 0089
  0600020 ff49 49c7 df39 850f feae ffff 8348 02fb
  0600030 8b4c a075 8b4c 8865 1b72 bf41 0001 0000
  0600040 2949 4bdf 3c8b e8fc faf1 ffa4 894b fc04
  0600050 ff49 75c7 48ee 7d8b 4cc0 f689 8148 88c4
  0600060 0000 5b00 5c41 5d41 5e41 5f41 e95d fa61
  0600070 ffff 4855 e589 5741 5641 5441 4853 ec83

which means the file is corrupt and has tons of zeros at the beginning.

After some digging, I've discovered that adding to the portfile:

depends_build port:gnutar

post-destroot {
    system -W ${destroot} "/usr/bin/tar -cvf - . 2>/dev/null | wc"
    system -W ${destroot} "${prefix}/bin/gtar -cvf - . 2>/dev/null | wc"
}

returns

  DEBUG: system -W /opt/local/var/macports/build/_Users_runner_work_macports-ports_macports-ports_ports_math_pari/pari/work/destroot: /usr/bin/tar -cvf - . 2>/dev/null | wc
    141230  797436 6000640
  DEBUG: system -W /opt/local/var/macports/build/_Users_runner_work_macports-ports_macports-ports_ports_math_pari/pari/work/destroot: /opt/local/bin/gtar -cvf - . 2>/dev/null | wc
    156802  971295 13424640

=> output are quite different, and system tar breaks an archive.

This bug also exists in the current version of pari. This means that the binary archive is literally broken.

The question is: how many other ports are affected?

[ryandesign (Ryan Carsten Schmidt)]

Surely this is not a general bug in tar on Ventura, else it would have been reported by now.

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

Surely this is not a general bug in tar on Ventura, else it would have been reported by now.

Unfortunately I'd like to disagree with you. After knowing that it is tar on macOS, I've discovered that it is well known issue.

For example: ​https://github.com/actions/runner-images/issues/2619

[jmroot (Joshua Root)]

That issue is from early 2021 and references a report from 2020, so it can't possibly be specific to Ventura. Anyway, the tl;dr appears to be that bsdtar handles sparse files differently than gnutar.

[catap (Kirill A. Korinsky)]

Replying to jmroot:

That issue is from early 2021 and references a report from 2020, so it can't possibly be specific to Ventura. Anyway, the tl;dr appears to be that bsdtar handles sparse files differently than gnutar.

I disagree with you. I've found at least one example of such a binary package. When I use /usr/bin/tar from MacOS 13, I can't decompress it either:

catap@Mac-mini pari % curl -O https://packages.macports.org/pari/pari-2.13.4_0.darwin_22.x86_64.tbz2
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1220k  100 1220k    0     0  2685k      0 --:--:-- --:--:-- --:--:-- 2706k
catap@Mac-mini pari % /usr/bin/tar --version
bsdtar 3.5.3 - libarchive 3.5.3 zlib/1.2.11 liblzma/5.0.5 bz2lib/1.0.8 
catap@Mac-mini pari % /usr/bin/tar xzf pari-2.13.4_0.darwin_22.x86_64.tbz2 
catap@Mac-mini pari % hexdump opt/local/lib/libpari.dylib | head  
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
0600000 0001 5500 5741 5641 5541 5441 5053 8949
0600010 e8f7 da3c ffff 8949 48c6 1d8d 8e28 000a
0600020 2b8b 03c7 0001 0000 20bf 0000 e800 9f7a
0600030 0000 8949 89c4 852b 75ed 4819 058d 8e0a
0600040 000a 3883 7400 8b0d c738 0000 0000 e800
0600050 9fbe 0000 854d 75e4 bf0c 0020 0000 c031
0600060 dfe8 f5ce 49ff 44c7 0824 000b 0000 8b49
0600070 4807 e8c1 8339 02f8 4f74 bd48 0000 0000
catap@Mac-mini pari % 

=> It seems that /usr/bin/tar can't decode what it has encoded :)

[catap (Kirill A. Korinsky)]

BTW, /usr/bin/tar is bsdtar and it seems that it may create a file that it can't read.

[jmroot (Joshua Root)]

I didn't say it didn't affect Ventura, I said it wasn't specific to Ventura.

[jmroot (Joshua Root)]

Does the suggestion to run /usr/sbin/purge first do anything for you? That would suggest the bug is actually in the OS.

[catap (Kirill A. Korinsky)]

Replying to jmroot:

Does the suggestion to run /usr/sbin/purge first do anything for you? That would suggest the bug is actually in the OS.

I may easy reproduce it via MacPort's Github but I have no idea how can I call sudo /usr/sbin/purge from Portfile's system call.

So, I can't say does it help or not.

[ryandesign (Ryan Carsten Schmidt)]

Replying to catap:

Replying to ryandesign:

Surely this is not a general bug in tar on Ventura, else it would have been reported by now.

Unfortunately I'd like to disagree with you. After knowing that it is tar on macOS, I've discovered that it is well known issue.

For example: ​https://github.com/actions/runner-images/issues/2619

What I meant is: we have built tens of thousands of ports on the Ventura buildbot workers and this problem either hasn't occurred there or hasn't caused issues. For example, if it were the case that extracting any port's archive, or specific ports' archives, always failed, then we would expect some ports to fail to install on the buildbot because of it, but we either haven't seen that happen, or we haven't realized that some failures may be attributable to this issue. In any case the problem doesn't seem to affect all users all of the time. It is not a 100% reproducible bug.

Thanks for the link. I've read it and some other related links and it does sound like an OS bug and that lack of reproducibility is commonly reported. Seems that Homebrew has applied the workaround that optionally calls purge around the code that creates the archives:

​https://github.com/Homebrew/brew/commit/36dac3d41feafa09f82dedb63e51fabf5f0ea358

Maybe we should do the same in MacPorts base.

I may have encountered a form of this issue myself with the mongodb port. I hadn't reported it because it wasn't consistently reproducible and I could not figure out whether it was a bug in the mongodb build system or something else, and it takes so long to build that it is difficult to debug. But on one of my Macs with Catalina, and on another Mac with Monterey, I have occasionally encountered sections of the mongod binary being replaced with zeroes, making the file unusable.

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

Replying to catap:

Replying to ryandesign:

Surely this is not a general bug in tar on Ventura, else it would have been reported by now.

Unfortunately I'd like to disagree with you. After knowing that it is tar on macOS, I've discovered that it is well known issue.

For example: ​https://github.com/actions/runner-images/issues/2619

What I meant is: we have built tens of thousands of ports on the Ventura buildbot workers and this problem either hasn't occurred there or hasn't caused issues. For example, if it were the case that extracting any port's archive, or specific ports' archives, always failed, then we would expect some ports to fail to install on the buildbot because of it, but we either haven't seen that happen, or we haven't realized that some failures may be attributable to this issue. In any case the problem doesn't seem to affect all users all of the time. It is not a 100% reproducible bug.

I accidentally found this problem in the pari port, and ecgeb, which depends on pari, has no artifact for Ventura x86 either: ​https://ports.macports.org/port/ecgen/details/ :)

My guess is that it happens, but nobody really cares enough to report it. New users facing this problem have probably given up on MacPorts.

Thanks for the link. I've read it and some other related links and it does sound like an OS bug and that lack of reproducibility is commonly reported. Seems that Homebrew has applied the workaround that optionally calls purge around the code that creates the archives:

​https://github.com/Homebrew/brew/commit/36dac3d41feafa09f82dedb63e51fabf5f0ea358

Maybe we should do the same in MacPorts base.

I am not sure if it is possible to do this within MacPorts, because this call requires sudo and MacPorts can be used without it.

Honestly, I haven't seen a good solution for this: switching to gnutar means forcing users to install it, and if we decide to go that way, let's switch to xar or xz, which will save disk space and traffic :)

Anyway, as a workaround, switching some rare ports to xar seems to be the best possible option, to be honest.

I may have encountered a form of this issue myself with the mongodb port. I hadn't reported it because it wasn't consistently reproducible and I could not figure out whether it was a bug in the mongodb build system or something else, and it takes so long to build that it is difficult to debug. But on one of my Macs with Catalina, and on another Mac with Monterey, I have occasionally encountered sections of the mongod binary being replaced with zeroes, making the file unusable.

Shall that port also be switched to xar?

[ryandesign (Ryan Carsten Schmidt)]

We do not have a mechanism for switching the compression method used for archives.

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

We do not have a mechanism for switching the compression method used for archives.

Do you mean in general? Because

set portarchivetype xar

switched compression method to xar for a specified port.

[ryandesign (Ryan Carsten Schmidt)]

I did mean in general. I had never heard of being able to set portarchivetype selectively for individual ports and don't know what the consequences of that might be.

[ryandesign (Ryan Carsten Schmidt)]

I have filed FB12160429 with Apple about this issue and noted that it is a duplicate of FB7378125 which someone else filed in 2019. If more people ​report the problem to Apple they are more likely to fix it sooner. If you include one of these feedback IDs in your report that will help Apple group the related reports together.

[ryandesign (Ryan Carsten Schmidt)]

Replying to catap:

Replying to jmroot:

Does the suggestion to run /usr/sbin/purge first do anything for you? That would suggest the bug is actually in the OS.

I may easy reproduce it via MacPort's Github but I have no idea how can I call sudo /usr/sbin/purge from Portfile's system call.

So, I can't say does it help or not.

To test that, you could add this to the Portfile:

pre-install {
    system "/usr/sbin/purge"
}

The install phase runs as root and is the phase in which the tar archive is created.

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

Replying to catap:

Replying to jmroot:

Does the suggestion to run /usr/sbin/purge first do anything for you? That would suggest the bug is actually in the OS.

I may easy reproduce it via MacPort's Github but I have no idea how can I call sudo /usr/sbin/purge from Portfile's system call.

So, I can't say does it help or not.

To test that, you could add this to the Portfile:

pre-install {
    system "/usr/sbin/purge"
}

The install phase runs as root and is the phase in which the tar archive is created.

It fixes an issue.

[l2dy (Zero King)]

Replying to catap:

Replying to ryandesign:

We do not have a mechanism for switching the compression method used for archives.

Do you mean in general? Because

set portarchivetype xar

switched compression method to xar for a specified port.

After your commit [4db7b54a39a4321cc9258a53231abcacca4998a6/macports-ports], the port always installs itself from source because the ​default archive_type is tbz2 and MacPorts base couldn't find .xar archives.

[catap (Kirill A. Korinsky)]

Replying to l2dy:

Replying to catap:

Replying to ryandesign:

We do not have a mechanism for switching the compression method used for archives.

Do you mean in general? Because

set portarchivetype xar

switched compression method to xar for a specified port.

After your commit [4db7b54a39a4321cc9258a53231abcacca4998a6/macports-ports], the port always installs itself from source because the ​default archive_type is tbz2 and MacPorts base couldn't find .xar archives.

Well.. at least it allows to build an archive which can be installed. Before this port might be broken, randomly :(

Do you have better suggestion?

[ryandesign (Ryan Carsten Schmidt)]

I do not think we should be attempting to switch the archive type of individual ports to avoid this problem. As I said, we never foresaw the need for such a thing so there is no sanctioned way to do that in MacPorts base. portarchivetype is not in the documented list of options you can set in Portfiles; it's documented as something you can set in macports.conf. As I said, I didn't know what the consequences switching portarchivetype in ports might be, and now we see that a consequence is that the user cannot receive a binary from our servers.

Further research tells me the issue is very intermittent, possibly relates to the creation of APFS ​sparse files, and that LLVM tools create such sparse files. I'm not sure what was meant by "LLVM tools", but if it means anything that uses LLVM, that would include clang, and we've certainly seen the problem with compiled software created by clang like the mongod binary and the pari library. The issue has also been seen on systems as far back as Catalina. I did not find a report of the problem on Mojave or High Sierra, but they can use APFS too, so the problem might affect them as well. Therefore, the issue has the potential to affect thousdands of our ports, at random, on several years worth of OS versions. And yet you've just brought the problem to our attention now. That means the problem occurs infrequently enough that we didn't notice it before and that just rebuilding the port, without any further changes, would probably have built successfully, although of course even if it rebuilt successfully on our buildbot servers then, it might build incorrectly for some users, though hopefully most users receive our binary instead of building from source.

In any case, we need a general solution in MacPorts base so that we don't sprinkle worarounds into thousands of ports, especially not a workaround that removes the ability to receive a binary. Running /usr/sbin/purge to purge the disk cache before creating the archive is one solution that people say work. It requires root, but that's not a problem for most MacPorts installations. Another workaround that doesn't need root is running /bin/sleep 10; this seems to give the disk cache enough time to sort itself out without a purge. MacPorts base could use one or the other of those, depending on if it's a root installation of MacPorts or not. We could probably limit it only to APFS filesystems, and maybe only those ports where supported_archs is not noarch, however it sounds like sparse files are increasingly common on macOS so even noarch ports might be creating them. There is an API on macOS 11 and later for determining if a file is sparse, so at least on macOS 11 and later we could traverse the destroot and only use purge or sleep if there were any sparse files.

If we are finding that certain ports are for some reason much more susceptible to the problem, we could add the workaround into those ports until a new release of MacPorts takes place.

As you mentioned in your original report, only BSD tar seems to be affected by this; GNU tar is not. I haven't tried to read the code of either of them, but if there is some code that GNU tar is running that avoids the issue, such as perhaps some preprocessing on all the files that it will add to the archive that coincidentally causes the disk cache to figure itself out, maybe we can use similar code in MacPorts base to avoid the need for either purge or sleep.

[ryandesign (Ryan Carsten Schmidt)]

Replying to ryandesign:

LLVM tools create such sparse files.

at least on macOS 11 and later we could traverse the destroot and only use purge or sleep if there were any sparse files.

On Monterey x86_64, reverting your change to portarchivetype, I tried destrooting pari and, every second or two, scanning the work directory for sparse files with Sparsity. (I scanned frequently since we know the problem fixes itself within 10 seconds.) Aside from a log file in the configure phase, I didn't see any sparse files. I also tried reverting your change that blacklists Xcode clang; no change. I haven't seen the problem with the pari tbz2 archive on my system. If you consistently see the problem on your system, you could try scanning with Sparsity to see if we can confirm the theory that the problem occurs when there are sparse files.

[ryandesign (Ryan Carsten Schmidt)]

Replying to ryandesign:

if there is some code that GNU tar is running that avoids the issue, such as perhaps some preprocessing on all the files that it will add to the archive that coincidentally causes the disk cache to figure itself out, maybe we can use similar code in MacPorts base to avoid the need for either purge or sleep.

If this code consistently shows you the problem:

Replying to catap:

post-destroot {
    system -W ${destroot} "/usr/bin/tar -cvf - . 2>/dev/null | wc"
    system -W ${destroot} "${prefix}/bin/gtar -cvf - . 2>/dev/null | wc"
}

then you can test this theory by reversing the order so that you call GNU tar first, then BSD tar. Is the BSD tar output then correct or is it still wrong?

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

On Monterey x86_64, reverting your change to portarchivetype, I tried destrooting pari and, every second or two, scanning the work directory for sparse files with Sparsity. (I scanned frequently since we know the problem fixes itself within 10 seconds.) Aside from a log file in the configure phase, I didn't see any sparse files. I also tried reverting your change that blacklists Xcode clang; no change. I haven't seen the problem with the pari tbz2 archive on my system. If you consistently see the problem on your system, you could try scanning with Sparsity to see if we can confirm the theory that the problem occurs when there are sparse files.

Unfortunately I'm able to reproduce it via Github CI. I not able to reproduce it at any of my system. But the same port had the same issue on the same macOS 13 on build bots.

I feel that this port / ability of reproduce the issue is good way for us to track it and fix it. Frankly speaking I don't like idea to flush caches. I feel that it covers the issue.

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

Replying to catap:

post-destroot {
    system -W ${destroot} "/usr/bin/tar -cvf - . 2>/dev/null | wc"
    system -W ${destroot} "${prefix}/bin/gtar -cvf - . 2>/dev/null | wc"
}

then you can test this theory by reversing the order so that you call GNU tar first, then BSD tar. Is the BSD tar output then correct or is it still wrong?

I've added:

depends_build port:gnutar

post-destroot {
    system -W ${destroot} "${prefix}/bin/gtar -cvf - . 2>/dev/null | wc"
    system -W ${destroot} "/usr/bin/tar -cvf - . 2>/dev/null | wc"
}

and have an output:

DEBUG: Executing proc-post-org.macports.destroot-destroot-1
DEBUG: system -W /opt/local/var/macports/build/_Users_runner_work_macports-ports_macports-ports_ports_math_pari/pari/work/destroot: /opt/local/bin/gtar -cvf - . 2>/dev/null | wc
  156802  971295 13424640
DEBUG: system -W /opt/local/var/macports/build/_Users_runner_work_macports-ports_macports-ports_ports_math_pari/pari/work/destroot: /usr/bin/tar -cvf - . 2>/dev/null | wc
  141230  797436 6000640

=> it doesn't change anything.

Thus, run two tars haven't fix or overstep an issue.

[ryandesign (Ryan Carsten Schmidt)]

Replying to catap:

Unfortunately I'm able to reproduce it via Github CI. I not able to reproduce it at any of my system. But the same port had the same issue on the same macOS 13 on build bots.

Yes I know pari-2.13.4_0.darwin_22.x86_64.tbz2 experienced the problem on the buildbot but none of the other builds of that version did, even though we know this issue can also affect earlier OS versions, and no previous pari versions were on the packages server, so we don't have enough data to say whether this was a one-time random occurrence or something that happens more regularly.

The Darwin 22 x86_64 buildbot worker is different from the others in that it is running on a MacBook Pro with an external hard drive (until I can figure out how to get it installed on one of the Xserves). Certainly we know that APFS is not optimal on hard drives and perhaps this bug is more common with hard drives. I don't know what hardware the GitHub Actions CI runners use. However, the problem is not exclusive to hard drives; the two Macs I saw the problem on with my mongodb builds were running off their internal SSDs.

I feel that this port / ability of reproduce the issue is good way for us to track it and fix it.

Agreed, it is!

Frankly speaking I don't like idea to flush caches. I feel that it covers the issue.

Hard to say at this point since we don't know what the issue is. If the issue is that there is a bug in the OS disk cache code such that it can contain stale data, then flushing the cache on OS versions where that bug exists is a reasonable workaround.

Several years ago Homebrew implemented the feature that formulas could opt in to flushing the cache and they haven't removed that feature which suggests that this workaround must be working sufficiently well.

Replying to catap:

Thus, run two tars haven't fix or overstep an issue.

Thanks, that's interesting!

The articles I read about sparse files said that the OS may create them when it thinks it would save space, even if the program creating the file didn't request that. And reading back a sparse file in the normal way would deliver the data in the normal way, even it was stored sparsely on disk. The program wouldn't ever need to know that a file had been sparse. I assumed that tar (either BSD or GNU) would simply read the original files, not care or know whether they were sparse, and write them to the archive. However, after searching through the ​libarchive issue tracker, I see that there have been bug reports about its handling of sparse files before, so libarchive must contain code to identify sparse files and handle them in a special way. Perhaps that code is buggy and we should report the problem to libarchive. Or maybe they will have a better idea about how to track down what's happening.

I've also now learned that ​GNU tar has support for special handling of sparse files too. But whereas libarchive seems to do this by default, GNU tar doesn't unless you use the --sparse flag. You could test again with ${prefix}/bin/gtar -cvf - --sparse . 2>/dev/null | wc and see if that also shows the problem.

[mascguy (Christopher Nielsen)]

Replying to ryandesign:

GNU tar has support for special handling of sparse files] too. But whereas libarchive seems to do this by default, GNU tar doesn't unless you use the --sparse flag. You could test again with ${prefix}/bin/gtar -cvf - --sparse . 2>/dev/null | wc and see if that also shows the problem.

If that works, my vote would be to use GNU tar, rather than the call to purge. (I suppose it would be less wonky if the latter is baked into base. Even then, it feels a bit... well... hacky...

[ryandesign (Ryan Carsten Schmidt)]

The command that MacPorts uses to extract an archive is determined by base. It was never intended for ports to override it, and I don't think it's possible for them to do so.

Yes, working around OS bugs sometimes requires hacks.

I wasn't sure how to test for this myself, but I understand now that I can just go to my fork of macports-ports, make a branch, edit the pari portfile to include the testing code, commit it, and GitHub Actions automatically runs builds for me.

Armed with this knowledge, I did some tests of my own. I saw the problem on macOS 12 and 13 but not on macOS 11.

I tested whether using GNU tar's --sparse flag caused it to experience the bug too. In my test runs, it did. That confirms for me that it is an OS filesystem bug, not a bug in libarchive.

I tested whether running purge before archiving fixed the problem. In my test runs, it did.

I tested whether using sleep 10 before archiving fixed the problem. In my test runs, it didn't.

[catap (Kirill A. Korinsky)]

Replying to mascguy:

Replying to ryandesign:

GNU tar has support for special handling of sparse files] too. But whereas libarchive seems to do this by default, GNU tar doesn't unless you use the --sparse flag. You could test again with ${prefix}/bin/gtar -cvf - --sparse . 2>/dev/null | wc and see if that also shows the problem.

If that works, my vote would be to use GNU tar, rather than the call to purge. (I suppose it would be less wonky if the latter is baked into base. Even then, it feels a bit... well... hacky...

The issue that we need to setup gnutar. And if we're switching to ship that, why not to switch to xz which should decrease bandwish / diskusage? :)

[catap (Kirill A. Korinsky)]

Replying to ryandesign:

Armed with this knowledge, I did some tests of my own. I saw the problem on macOS 12 and 13 but not on macOS 11.

I tested whether using GNU tar's --sparse flag caused it to experience the bug too. In my test runs, it did. That confirms for me that it is an OS filesystem bug, not a bug in libarchive.

I tested whether running purge before archiving fixed the problem. In my test runs, it did.

I tested whether using sleep 10 before archiving fixed the problem. In my test runs, it didn't.

Seems that the only way to solve it is purge inside base.

But it won't help if someone runs port without sudo :(

[ryandesign (Ryan Carsten Schmidt)]

Replying to catap:

The issue that we need to setup gnutar. And if we're switching to ship that, why not to switch to xz which should decrease bandwish / diskusage? :)

As I've explained several times already, we don't have a mechanism for switching the archive compression method, at least not within a major OS version. It is specified in the user's macports.conf, in the portarchivetype option, and all the user's installed ports use archives of this type. There's no code in MacPorts base to, for example, recompress all the user's installed archives with a new compression method if the user changes portarchivetype after having ports installed, so changing it when ports are installed will just break everything. We also don't have anything in place to convert the vast number of tbz2 archives on the packages server to txz. Obviously a script could be written to do that. But we would either have to keep all archives available in both formats during the transition period, modifying mpbb as well to upload both archive types, or there would be a period of time during the transition where some users would not receive archives, either because we have converted all the archives and they haven't upgraded MacPorts base yet or because we haven't converted all the archives and they have upgraded MacPorts base already. Or we would have to modify MacPorts base so that it would attempt downloading archives in both formats.

Fortunately portarchivetype is commented out in the default macports.conf, so if we decided to change the default value (for example to txz) starting from macOS 14, even users who upgraded from an older system and retained their old macports.conf would get the new archive type.

Bundling gnutar with MacPorts base is potentially problematic as its license is GPL while MacPorts' license is BSD.

Bundling xz is potentially problematic because its license is public domain which is legally ambiguous.

See #47255 and #52000 and #56237 for prior discussion of these issues.

bsdtar from libarchive 3.6.0 and later has a --no-sparse-read flag to turn off its handling of sparse files, which should fix the problem. Unfortunately even macOS Ventura 13.3 still has an older version of bsdtar so this flag is not available. I don't know if this functionality can be accessed from the tar command line program in prior versions (perhaps with some environment variable). The functionality is present in earlier libarchive versions so if MacPorts base were to create archives by calling libarchive functions instead of by running the tar executable then we could disable this feature and thereby avoid the problem.

Replying to catap:

Seems that the only way to solve it is purge inside base.

But it won't help if someone runs port without sudo :(

Yes, I've mentioned the lack of a workaround for non-root use cases in my Apple feedback report. So far they have not responded to it.

[catap (Kirill A. Korinsky)]

In 463db483a1f752cfae8ec51ce46411c9248a65be/macports-ports (master):

pari: call purge only when it is possible

See: #67336