Can't install port cmake nor cmake +universal when targeting 10.5 from 10.6

[moala@…]

Here is the log for cmake +universal, on Snow Leopard

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.22_0 exists in the ports tree
:debug:main libidn 1.22_0 +universal is the latest installed
:debug:main libidn 1.22_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 +universal is the latest installed
:debug:main libiconv 1.14_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 +universal is the latest installed
:debug:main ncurses 5.9_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0 +universal is the latest installed
:debug:main expat 2.1.0_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0 +universal is the latest installed
:debug:main openssl 1.0.1c_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0 +universal is the latest installed
:debug:main zlib 1.2.7_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:msg:main --->  Computing dependencies for cmake:info:main .:debug:main cmake has no conflicts
:debug:main Searching for dependency: libidn
:debug:main Found Dependency: receipt exists for libidn
:debug:main Searching for dependency: openssl
:debug:main Found Dependency: receipt exists for openssl
:msg:main 
:debug:main Executing org.macports.main (cmake)
:debug:archivefetch archivefetch phase started at Thu May 31 12:34:57 CEST 2012
:msg:archivefetch --->  Fetching archive for cmake
:debug:archivefetch Executing org.macports.archivefetch (cmake)
:info:archivefetch --->  cmake-2.8.8_1+universal.darwin_10.i386-x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
:msg:archivefetch --->  Attempting to fetch cmake-2.8.8_1+universal.darwin_10.i386-x86_64.tbz2 from http://packages.macports.org/cmake
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:debug:fetch fetch phase started at Thu May 31 12:34:57 CEST 2012
:notice:fetch --->  Fetching distfiles for cmake
:debug:fetch Executing org.macports.fetch (cmake)
:debug:checksum checksum phase started at Thu May 31 12:34:57 CEST 2012
:notice:checksum --->  Verifying checksum(s) for cmake
:debug:checksum Executing org.macports.checksum (cmake)
:info:checksum --->  Checksumming cmake-2.8.8.tar.gz
:debug:checksum Correct (md5) checksum for cmake-2.8.8.tar.gz
:debug:checksum Correct (sha1) checksum for cmake-2.8.8.tar.gz
:debug:checksum Correct (rmd160) checksum for cmake-2.8.8.tar.gz
:debug:extract extract phase started at Thu May 31 12:34:57 CEST 2012
:notice:extract --->  Extracting cmake
:debug:extract Executing org.macports.extract (cmake)
:info:extract --->  Extracting cmake-2.8.8.tar.gz
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/cmake/cmake-2.8.8.tar.gz'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/cmake/cmake-2.8.8.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/cmake/cmake-2.8.8.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - 
:debug:patch patch phase started at Thu May 31 12:34:59 CEST 2012
:debug:patch Executing org.macports.patch (cmake)
:notice:patch --->  Applying patches to cmake
:info:patch --->  Applying patch-CMakeFindFrameworks.cmake.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake/files/patch-CMakeFindFrameworks.cmake.diff'
:info:patch patching file Modules/CMakeFindFrameworks.cmake
:info:patch --->  Applying patch-Modules-FindQt4.cmake.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake/files/patch-Modules-FindQt4.cmake.diff'
:info:patch patching file Modules/FindQt4.cmake
:info:patch --->  Applying patch-Modules_FindPkgConfig_cmake.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.5'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake/files/patch-Modules_FindPkgConfig_cmake.diff'
:info:patch patching file Modules/FindPkgConfig.cmake
:debug:patch Executing proc-post-org.macports.patch-patch-0
:debug:patch Executing reinplace: /usr/bin/sed s|__PREFIX__|/opt/local|g < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8/macports.cmake >@ file10
:debug:patch Executing reinplace: /usr/bin/sed s|__PREFIX__|/opt/local|g < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8/Modules/CMakeFindFrameworks.cmake >@ file10
:debug:configure configure phase started at Thu May 31 12:35:00 CEST 2012
:notice:configure --->  Configuring cmake
:debug:configure Using compiler 'Mac OS X gcc 4.2'
:debug:configure Executing org.macports.configure (cmake)
:info:configure --->  Configuring cmake for architecture x86_64
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64 -isysroot /Developer/SDKs/MacOSX10.5.sdk' CPPFLAGS='-I/opt/local/include -isysroot /Developer/SDKs/MacOSX10.5.sdk' CXXFLAGS='-O2 -arch x86_64 -isysroot /Developer/SDKs/MacOSX10.5.sdk' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.5' CMAKE_PREFIX_PATH='/opt/local' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/.CC_PRINT_OPTIONS' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64 -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk' FCFLAGS='-O2 -m64' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' CMAKE_INCLUDE_PATH='/opt/local/include/ncurses' CMAKE_LIBRARY_PATH='/opt/local/lib' FFLAGS='-O2 -m64' NM='/usr/bin/nm' OBJCFLAGS='-O2 -arch x86_64 -isysroot /Developer/SDKs/MacOSX10.5.sdk' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8-x86_64" && ./configure --prefix=/opt/local --mandir=/share/man --docdir=/share/doc/cmake --parallel=2 --init=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8/macports.cmake --host=x86_64-apple-darwin9'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8-x86_64" && ./configure --prefix=/opt/local --mandir=/share/man --docdir=/share/doc/cmake --parallel=2 --init=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8/macports.cmake --host=x86_64-apple-darwin9 
:info:configure Unknown option: --host=x86_64-apple-darwin9
:info:configure Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8-x86_64" && ./configure --prefix=/opt/local --mandir=/share/man --docdir=/share/doc/cmake --parallel=2 --init=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/work/cmake-2.8.8/macports.cmake --host=x86_64-apple-darwin9 
:info:configure Exit code: 1
:error:configure org.macports.configure for port cmake returned: configure failure: command execution failed
:debug:configure Error code: NONE
:debug:configure Backtrace: configure failure: command execution failed
    while executing
"$procedure $targetname"
:info:configure Warning: targets not executed for cmake: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
:notice:configure Please see the log file for port cmake for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_cmake/cmake/main.log

[mf2k (Frank Schima)]

In the future, please fill in the Port field and Cc the maintainer(s).

[moala@…]

resolved: see this: ​https://trac.macports.org/ticket/34748#comment:2