Unable to install py27-pygrib

[tylordippel@…]

After installing Macports, I entered sudo port install py27-pygrib. Many of the dependencies were installed; however, when it got the the py27-pygrib installer, I got an error. I installed macports with the package installer and have the xcode commend line tools installed. Here is what the log file said:

version:1 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.3_0 exists in the ports tree :debug:main python27 2.7.3_0 is the latest installed :debug:main python27 2.7.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! python27 2.7.3_0 >= python27 2.7.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.1c_0 exists in the ports tree :debug:main openssl 1.0.1c_0 is the latest installed :debug:main openssl 1.0.1c_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.14_1 exists in the ports tree :debug:main sqlite3 3.7.14_1 is the latest installed :debug:main sqlite3 3.7.14_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20120601-3.0_0 exists in the ports tree :debug:main libedit 20120601-3.0_0 is the latest installed :debug:main libedit 20120601-3.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 is the latest installed :debug:main db46 4.6.21_6 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46 :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main py27-pyproj 1.9.2_0 exists in the ports tree :debug:main py27-pyproj 1.9.2_0 is the latest installed :debug:main py27-pyproj 1.9.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-pyproj :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl :debug:main Re-registering default for build.cmd :debug:main Re-registering default for destroot.cmd :debug:main Re-registering default for destroot.destdir :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! py27-pyproj 1.9.2_0 >= py27-pyproj 1.9.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main py27-distribute 0.6.28_0 exists in the ports tree :debug:main py27-distribute 0.6.28_0 is the latest installed :debug:main py27-distribute 0.6.28_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-distribute :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl :debug:main Re-registering default for build.cmd :debug:main Re-registering default for destroot.cmd :debug:main Re-registering default for destroot.destdir :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! py27-distribute 0.6.28_0 >= py27-distribute 0.6.28_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main py27-numpy 1.6.2_0 exists in the ports tree :debug:main py27-numpy 1.6.2_0 is the latest installed :debug:main py27-numpy 1.6.2_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-numpy :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl :debug:main Re-registering default for build.cmd :debug:main Re-registering default for destroot.cmd :debug:main Re-registering default for destroot.destdir :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! py27-numpy 1.6.2_0 >= py27-numpy 1.6.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fftw-3 3.3.2_1 exists in the ports tree :debug:main fftw-3 3.3.2_1 is the latest installed :debug:main fftw-3 3.3.2_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/math/fftw-3 :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! fftw-3 3.3.2_1 >= fftw-3 3.3.2_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main py27-nose 1.2.1_0 exists in the ports tree :debug:main py27-nose 1.2.1_0 is the latest installed :debug:main py27-nose 1.2.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/py-nose :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/python-1.0.tcl :debug:main Re-registering default for build.cmd :debug:main Re-registering default for destroot.cmd :debug:main Re-registering default for destroot.destdir :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! py27-nose 1.2.1_0 >= py27-nose 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main nosetests_select 0.1_0 exists in the ports tree :debug:main nosetests_select 0.1_0 is the latest installed :debug:main nosetests_select 0.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/python/nosetests_select :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! nosetests_select 0.1_0 >= nosetests_select 0.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main grib_api 1.9.9_4 exists in the ports tree :debug:main grib_api 1.9.9_4 is the latest installed :debug:main grib_api 1.9.9_4 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/science/grib_api :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! grib_api 1.9.9_4 >= grib_api 1.9.9_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main jasper 1.900.1_9 exists in the ports tree :debug:main jasper 1.900.1_9 is the latest installed :debug:main jasper 1.900.1_9 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9 :debug:main epoch: in tree: 0 installed: 0 :debug:main jpeg 8d_0 exists in the ports tree :debug:main jpeg 8d_0 is the latest installed :debug:main jpeg 8d_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jpeg 8d_0 >= jpeg 8d_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main openjpeg 1.5.0_3 exists in the ports tree :debug:main openjpeg 1.5.0_3 is the latest installed :debug:main openjpeg 1.5.0_3 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/openjpeg :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! openjpeg 1.5.0_3 >= openjpeg 1.5.0_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpng 1.5.12_0 exists in the ports tree :debug:main libpng 1.5.12_0 is the latest installed :debug:main libpng 1.5.12_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libpng 1.5.12_0 >= libpng 1.5.12_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main tiff 3.9.5_0 exists in the ports tree :debug:main tiff 3.9.5_0 is the latest installed :debug:main tiff 3.9.5_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main lcms2 2.4_0 exists in the ports tree :debug:main lcms2 2.4_0 is the latest installed :debug:main lcms2 2.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms2 :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! lcms2 2.4_0 >= lcms2 2.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main jbigkit 2.0_2 exists in the ports tree :debug:main jbigkit 2.0_2 is the latest installed :debug:main jbigkit 2.0_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jbigkit :debug:main OS darwin/11.4.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2 :msg:main ---> Computing dependencies for py27-pygrib:info:main .:debug:main py27-pygrib has no conflicts :debug:main Searching for dependency: python27 :debug:main Found Dependency: receipt exists for python27 :debug:main Searching for dependency: py27-pyproj :debug:main Found Dependency: receipt exists for py27-pyproj :debug:main Searching for dependency: py27-numpy :debug:main Found Dependency: receipt exists for py27-numpy :debug:main Searching for dependency: grib_api :debug:main Found Dependency: receipt exists for grib_api :msg:main :debug:main Executing org.macports.main (py27-pygrib) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:main Skipping completed org.macports.archivefetch (py27-pygrib) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (py27-pygrib) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (py27-pygrib) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (py27-pygrib) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (py27-pygrib) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (py27-pygrib) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Thu Oct 4 16:47:13 EDT 2012 :notice:build ---> Building py27-pygrib :debug:build Executing proc-pre-org.macports.build-build-0 :debug:build Executing org.macports.build (py27-pygrib) :debug:build Environment: CPATH='/opt/local/include' CFLAGS='-arch x86_64' CXXFLAGS='-arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/usr/bin/clang++' PNG_DIR='/opt/local' JASPER_DIR='/opt/local' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pygrib/py27-pygrib/work/.CC_PRINT_OPTIONS' F90FLAGS='-m64' LDFLAGS='-arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-m64' OBJCFLAGS='-arch x86_64' FFLAGS='-m64' GRIBAPI_DIR='/opt/local' CC_PRINT_OPTIONS='YES' OPENJPEG_DIR='/opt/local' CC='/usr/bin/clang' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pygrib/py27-pygrib/work/pygrib-1.9.2" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pygrib/py27-pygrib/work/pygrib-1.9.2" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build :info:build running build :info:build running build_py :info:build running build_ext :info:build building 'g2clib' extension :info:build /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch x86_64 -DUSE_JPEG2000=1 -DUSE_PNG=1 -D64BIT=1 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/core/include -I/opt/local/include -I/opt/local/include -I/opt/local/include/jasper -I/opt/local/include -I/opt/local/include -Ig2clib_src -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c g2clib_src/cmplxpack.c -o build/temp.macosx-10.7-x86_64-2.7/g2clib_src/cmplxpack.o :info:build /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch x86_64 -DUSE_JPEG2000=1 -DUSE_PNG=1 -D64BIT=1 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/core/include -I/opt/local/include -I/opt/local/include -I/opt/local/include/jasper -I/opt/local/include -I/opt/local/include -Ig2clib_src -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c g2clib_src/compack.c -o build/temp.macosx-10.7-x86_64-2.7/g2clib_src/compack.o :info:build /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch x86_64 -DUSE_JPEG2000=1 -DUSE_PNG=1 -D64BIT=1 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/core/include -I/opt/local/include -I/opt/local/include -I/opt/local/include/jasper -I/opt/local/include -I/opt/local/include -Ig2clib_src -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c g2clib_src/comunpack.c -o build/temp.macosx-10.7-x86_64-2.7/g2clib_src/comunpack.o :info:build /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch x86_64 -DUSE_JPEG2000=1 -DUSE_PNG=1 -D64BIT=1 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/core/include -I/opt/local/include -I/opt/local/include -I/opt/local/include/jasper -I/opt/local/include -I/opt/local/include -Ig2clib_src -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c g2clib_src/dec_jpeg2000.c -o build/temp.macosx-10.7-x86_64-2.7/g2clib_src/dec_jpeg2000.o :info:build /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch x86_64 -DUSE_JPEG2000=1 -DUSE_PNG=1 -D64BIT=1 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/core/include -I/opt/local/include -I/opt/local/include -I/opt/local/include/jasper -I/opt/local/include -I/opt/local/include -Ig2clib_src -I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c g2clib_src/dec_png.c -o build/temp.macosx-10.7-x86_64-2.7/g2clib_src/dec_png.o :info:build g2clib_src/dec_png.c:91:30: error: use of undeclared identifier 'voidp'; did you mean 'void'? :info:build png_set_read_fn(png_ptr,(voidp)&read_io_ptr,(png_rw_ptr)user_read_data); :info:build ^{:info:build 1 error generated. :info:build error: command '/usr/bin/clang' failed with exit status 1 :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pygrib/py27-pygrib/work/pygrib-1.9.2" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build :info:build Exit code: 1 :error:build org.macports.build for port py27-pygrib returned: command execution failed :debug:build Error code: CHILDSTATUS 67329 1 :debug:build Backtrace: command execution failed}

while executing

"system -nice 0 $fullcmdstring"

("eval" body line 1) invoked from within

"eval system $notty $nice \$fullcmdstring"

invoked from within

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" :info:build Warning: targets not executed for py27-pygrib: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port py27-pygrib for details:

/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_python_py-pygrib/py27-pygrib/main.log